Database Info

Power Switch Lite APK

Could someone post the APK of Power Switch Lite (its free!) ? I wanted to test it out....
Sent from my Kindle Fire using Tapatalk

Is this it

What does it do?
Sent from my DROID2 GLOBAL using XDA

greezal said:
What does it do?
Sent from my DROID2 GLOBAL using XDA
Click to expand...
Click to collapse
It puts the device to sleep after the case has been closed, similar to the iPad 2's magic case, but this app uses the light sensor to detect the amount of light after you close the case.
Sent from a blaze of amazon using Tapatalk

shravbits said:
It puts the device to sleep after the case has been closed, similar to the iPad 2's magic case, but this app uses the light sensor to detect the amount of light after you close the case.
Sent from a blaze of amazon using Tapatalk
Click to expand...
Click to collapse
So if you suddenly turn off the light in the room, it will shut off the screen?

veeman said:
So if you suddenly turn off the light in the room, it will shut off the screen?
Click to expand...
Click to collapse
Not necessarily. You can configure the light sensitivity in the full version, and you can also use other sensors (such as proximity and accelerometer) to activate sleep
Sent from a blaze of amazon using Tapatalk

shravbits said:
Not necessarily. You can configure the light sensitivity in the full version, and you can also use other sensors (such as proximity and accelerometer) to activate sleep
Sent from a blaze of amazon using Tapatalk
Click to expand...
Click to collapse
So does it work on the fire?

veeman said:
So does it work on the fire?
Click to expand...
Click to collapse
Somewhat. The light sensor is weak so I have to turn on accelerometer sensing and shake the crap out of it to get into lockscreen. But I am unrooted and it says it needs root to work perfectly, so I'm going to root and try again
Sent from a blaze of amazon using Tapatalk

LED flash notifications

Hello All,
Looking to use the phone's LED flash, as a notification... text messages for example.
any suggestions?

Not to sound like a super **** but: have you tried Google Play? I think there's apps that do that
Sent from my HTC One X using xda app-developers app

100%digital said:
Hello All,
Looking to use the phone's LED flash, as a notification... text messages for example.
any suggestions?
Click to expand...
Click to collapse
why? that would kill battery like crazy, not to mention it would heat up the led bulb to the touch.

Try light flow on the market. They have a lite version but you may have to be rooted. I don't have time to try it right now but should work. As for heating the led that's not even a concern.
Sent from my one x

Lightflow does allow for led use. Ive used in the past with the hox.
Sent from my One X using xda app-developers app

if i wanna use my phones LED to cook meth, who cares... while i can see the LED using a lot power -im only looking for a couple fast blinks when a text is delivered, thought this was a native function within CM9/10, but thats not the case.

Oh what I'd do for a multi-color LED like the original nexus

+1 for light flow. Go sms also lets you set the notification light. The HOX displays green orange and red.

LEDs don't produce heat
Sent from my HTC One X using Tapatalk 2

texaswickedtoys said:
LEDs don't produce heat
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
Large ones most certainly do. Like the ceiling light ones all have heatsinks.
Sent from my HTC One XL

http://forum.xda-developers.com/showthread.php?p=14961111
Works great. Hope this helps.

[Q] Screen not turning on during calls!

Hello everyone,
So i bought a one X a couple months ago and it already came with a custom rom, i removed that and installed the Team Viper rom and currently have the latest version installed (April 10). The phone screen will not turn on during a call if you move the phone away from your ear like it should, the only way to get it to turn on is by pressing the power button and even then it only stays on for a few seconds and then turns right back off. Im not sure if this worked before i installed Viper. Any suggestions guys?

Joe-Pk said:
Hello everyone,
So i bought a one X a couple months ago and it already came with a custom rom, i removed that and installed the Team Viper rom and currently have the latest version installed (April 10). The phone screen will not turn on during a call if you move the phone away from your ear like it should, the only way to get it to turn on is by pressing the power button and even then it only stays on for a few seconds and then turns right back off. Im not sure if this worked before i installed Viper. Any suggestions guys?
Click to expand...
Click to collapse
Do you have a case? Try placing a call and use your finger to left of the AT&T logo. I don't know much about viper but could be a setting (usually accessibility) that does that.
Sent from my Carbon-ize Evita using xda-developers app

You can also try calibrating g sensor.
Settings-Display and Gestures- G Sensor
Sent from my HTC One X using xda premium

Herc08 said:
Do you have a case? Try placing a call and use your finger to left of the AT&T logo. I don't know much about viper but could be a setting (usually accessibility) that does that.
Sent from my Carbon-ize Evita using xda-developers app
Click to expand...
Click to collapse
I tried both of the suggestions from you guys and none of them work. I tried doing a full wipe and re installing the viper rom but no success...anything else?

Have you set a security lock for the home screen?
Sent from my HTC One X using xda premium

Venomtester said:
Have you set a security lock for the home screen?
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
also is there a screen timeout? and im sure android has a feature where you can hang up using power button...again i am not sure about viper, but if you go to settings > accessbility > and make sure certain things are not checked, that can help...if that doest work, then your proximity sensor could not be working...does your auto brightness adjust accordingly?

Herc08 said:
also is there a screen timeout? and im sure android has a feature where you can hang up using power button...again i am not sure about viper, but if you go to settings > accessbility > and make sure certain things are not checked, that can help...if that doest work, then your proximity sensor could not be working...does your auto brightness adjust accordingly?
Click to expand...
Click to collapse
Venomtester said:
Have you set a security lock for the home screen?
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
There is no security lock for the homescreen, the auto brightness also works perfectly. I cant find anything in accessibility the only thing checked off is auto rotate screen. I think it may be the proximity sensor then because the digitizer on the phone looks like it was replaced.

The only other thing that I can think of is a screen protector that is blocking it or it has smudges that need to be cleaned. They have apps that calibrate proximity sensors but I have never used them.
Sent from my One X using xda premium

Venomtester said:
The only other thing that I can think of is a screen protector that is blocking it or it has smudges that need to be cleaned. They have apps that calibrate proximity sensors but I have never used them.
Sent from my One X using xda premium
Click to expand...
Click to collapse
I seen those up here. Search the forums or play store. Is the auto brightness using the same sensor or is it two? Tried looking, but can't tell.
Sent from my Carbon-ize Evita using xda-developers app

I believe it is two. If both auto brightness and proximity were running off the same sensor, they would both act up. I think. Just a theory. But if it is one sensor then the calibration app should work.
Sent from my One X using xda premium

Venomtester said:
I believe it is two. If both auto brightness and proximity were running off the same sensor, they would both act up. I think. Just a theory. But if it is one sensor then the calibration app should work.
Sent from my One X using xda premium
Click to expand...
Click to collapse
It would make sense to be two. But who knows?

Does the Maxx

Have a LED anywhere?
Sent from my XT1080 using Tapatalk

Apparently there's an LED that only lights when the battery is too low to power up. I've never seen it.

Brenardo said:
Have a LED anywhere?
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
if you have to have it (I like the active notifications better), you can use the xposed module Gravity Box to cause the buttons to flash with notifications. I'm sure there's other options that do the same though, but you run the risk of losing battery a lot faster (hence the purpose of active notifications)

There's an led on the back that's used with the camera....
Sent from my Nexus 7 using Tapatalk 4

Brenardo said:
Have a LED anywhere?
Sent from my XT1080 using Tapatalk
Click to expand...
Click to collapse
Yupp!! Its next to the proximity sensor but is disabled by code... Skrilax_CZ is working on getting it working for CM11!! So stay tuned if u have a dev edition!

Casen said:
There's an led on the back that's used with the camera....
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
I like this answer, and I appreciate it. I also like the fact that you were not rude even though you were really thinking deep down inside that I was too ****ing stupid to know that there was an LED on the back for the camera. :sly:
Sent from my XT1080 using Tapatalk

Casen said:
There's an led on the back that's used with the camera....
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Holy crap there IS a led there! Thanks Casen for that tip! I NEVER knew that and I stare at the back of my phone for hours!

Hidden LED

So, just like all the previous Moto phones, this one has a hidden LED too!
Using root and any kernel tweaker with an option to adjust leds, you can switch it on. It seems to be only white as far as I could tell but it's there! (In the middle of the speaker grill on top)

juanacevedo said:
So, just like all the previous Moto phones, this one has a hidden LED too!
Using root and any kernel tweaker with an option to adjust leds, you can switch it on. It seems to be only white as far as I could tell but it's there! (In the middle of the speaker grill on top)
Click to expand...
Click to collapse
Waiting on some more people to try this but that's awesome! And I personally LOVE the LED position

juanacevedo said:
So, just like all the previous Moto phones, this one has a hidden LED too!
Using root and any kernel tweaker with an option to adjust leds, you can switch it on. It seems to be only white as far as I could tell but it's there! (In the middle of the speaker grill on top)
Click to expand...
Click to collapse
Which kernel tweaker. Kernel auditor doesn't do this. Unless I missed it.

Sweet which app exactly was it ?
Sent from my SM-N910V using Tapatalk

Ex Kernel manager!

**** yeah, thanks juan

anyway to make moto use it to let us know when a notification is available in addition to the moto display feature

jphantom said:
anyway to make moto use it to let us know when a notification is available in addition to the moto display feature
Click to expand...
Click to collapse
+1
Anyway to make it work with or without moto display, it would be sweet to have a notification LED on this phone

what is the hidden LED normally for on the other motos?

PolishDude said:
what is the hidden LED normally for on the other motos?
Click to expand...
Click to collapse
Usually to indicate the phone is charging when it gets plugged in from a completely dead state, before it even powers on the screen
Sent from my XT1575

I found the setting in trickster mod, but it only turns it on when charging. Will we be able to use it for notifications?

Assume that LiteFlow would work (paid version) as it does with Nexus 6. Give that a try.

akellar said:
Assume that LiteFlow would work (paid version) as it does with Nexus 6. Give that a try.
Click to expand...
Click to collapse
I remember this app on og nexus from 2012. You think turning it into notification led would work ?
Sent from my SM-N910V using Tapatalk

Hopefully LightFlow would work, I have enjoyed that app for years on my OG Droid.

patt2k said:
I remember this app on og nexus from 2012. You think turning it into notification led would work ?
Sent from my SM-N910V using Tapatalk
Click to expand...
Click to collapse
It has for other Moto devices so I assume so. I'm not personally interested enough to pay for the app to find out though, sorry.

akellar said:
It has for other Moto devices so I assume so. I'm not personally interested enough to pay for the app to find out though, sorry.
Click to expand...
Click to collapse
I guess one could buy it, try it real quick, and if it does not work, get a refund within the allotted time Google Play gives you.

How bright is the LED? It might not be useful because of the front flash unless it's a dim light. From the picture it seems bright though.

Ganondroid said:
How bright is the LED? It might not be useful because of the front flash unless it's a dim light. From the picture it seems bright though.
Click to expand...
Click to collapse
Not sure what the led and the front flash would have to do with each other?
Sent from my XT1575 using XDA Free mobile app

akellar said:
Not sure what the led and the front flash would have to do with each other?
Sent from my XT1575 using XDA Free mobile app
Click to expand...
Click to collapse
The Flash is just an LED anyway, so there would just be a second LED on the front.

Ganondroid said:
The Flash is just an LED anyway, so there would just be a second LED on the front.
Click to expand...
Click to collapse
OK?
Sent from my XT1575 using XDA Free mobile app