Database Info

Simple (not one-click) root for stock ROM & kernel

Update: One click root has been using this "simple" method since version 2.2.7. If you're rooting your phone for the first time, please try that first. Consider this thread to be purely informational for those who want step-by-step details of how the process works.
I've been suspicious of the joeykrim root method since it was first posted at SDX. I finally got my Epic yesterday and confirmed that is, indeed unnecessary. I don't fault joeykrim though, he ported the working root method from the Moment to the Epic without actually having access to an Epic himself.
Anyways, the joeykrim root method is unnecessarilly complex becuase it works around an RFS permissions bug which loses the setuid bit on the Moment. It appears the Galaxy S phones have this bug fixed, which is why the root methods on the I9000, Vibrant, Captivate, Fascinate, etc., are much simpler.
So, for the simple root:
First, make sure joeykrim root is not installed.
Upgrade to DI18 (not strictly necessary, but you'll want to do it).
Setup a working adb from the Android SDK and whatever drivers are necessary for your platform.
Download rageagainstthecage-arm5.bin from the C skills blog (link removed due to my newbieness) or from any of the one-click root packages.
Download su-2.3.6.1-ef-signed.zip and extract "system/bin/su" and "system/app/Superuser.apk" to a temporary directory you'll be working from.
Enable USB debugging on your phone and connect it to your computer.
Now, open a command prompt/shell on your computer and cd to the appropriate temporary directory. Run:
Code:
adb push rageagainstthecage-arm5.bin /data/local/tmp
adb shell chmod 755 /data/local/tmp/rageagainstthecage-arm5.bin
adb shell /data/local/tmp/rageagainstthecage-arm5.bin
and confirm you have a working root shell. Then continue with:
Code:
adb push su /system/xbin
adb shell chmod 4755 /system/xbin/su
adb install Superuser.apk
That's it! You should have a working root via su & the Superuser package. At least, I did.
Note that the preceeding steps installs Superuser.apk to /data, which is what I prefer to do. This means if you do a "Factory data reset" su will be temporarilly broken until you reinstall the Superuser.apk package. Since installing the package itself doesn't require root, this is easily done after a /data reset.
Also note that I did not perform a /system remount-rw anywhere. At least on my Epic, /system appears to always be mounted read-write so it's an unnecessary step. It's actually the "joeykrim-root.sh" script that remounts /system read-only during the boot process, which is why folks who don't use root kernels have run into this problem before. I'm not sure why joeykrim's script does that, I guess he probably assumed /system is mounted read-only by default. There's arguments that /system should be read-only, but I didn't touch it in case some Samsung stuff depends on it being read-write.
Finally, if you're already rooted via joeykrim or are running a root kernel, there's nothing really to be gained by doing this. I'm just throwing this out there as I perfer to make the minimum invasive changes possible to obtain root.

Wow, that was really informative. To check for Super user you:
Type: adb shell
then type: SU
You should get a # sign if you have root. Correct?
In the original Noobln post method would the Epic keep root even after a wipe therefore not needing to re-apply the superuser apk again? That might be a reason why folks would want to go the more invasive route (considering rooters seems to change ROMS fairly often which requires wipes sometimes). Either way, keeping a copy of the apk file on your SD card is no big deal.

mkasick said:
Also note that I did not perform a /system remount-rw anywhere. At least on my Epic, /system appears to always be mounted read-write so it's an unnecessary step. It's actually the "joeykrim-root.sh" script that remounts /system read-only during the boot process, which is why folks who don't use root kernels have run into this problem before. I'm not sure why joeykrim's script does that, I guess he probably assumed /system is mounted read-only by default. There's arguments that /system should be read-only, but I didn't touch it in case some Samsung stuff depends on it being read-write.
Click to expand...
Click to collapse
This explains a lot of problems! thanks
EDIT- another noob question- why do you prefer to have superuser installed to /system/data- why not put it in /system/app? Also if I want to install busybox where is the best location to put it?

ZenInsight said:
Wow, that was really informative. To check for Super user you:
Type: adb shell
then type: SU
You should get a # sign if you have root. Correct?
Click to expand...
Click to collapse
Once you run rageagainstthecage-arm5.bin, you should get a root-shell automatically every time you run "adb shell" after until you reboot the phone. Yes, you can tell it's a root shell since it uses the "#" prompt. This is the important part to check, since if the exploit doesn't work, you'll have to run it again. But I haven't seen it not work.
After su is installed and you reboot, your steps are correct: run "adb shell", run "su", then you'll be prompted on the phone scren to authorize access and once you allow it you'll end up with a "#" prompt.
ZenInsight said:
In the original Noobln post method would the Epic keep root even after a wipe therefore not needing to re-apply the superuser apk again?
Click to expand...
Click to collapse
noobnl installs Superuser.apk to /system, you can do that here too. Just replace the "adb install Superuser.apk" step with "adb push Superuser.apk /system/app". It's independent of the joeykrim scripts.

With my captivate we have many update.zip root methods to choose from. Any chance this will be coming to the epic? Have a friend with an epic and command lines would be too much and one click didn't work.
Sent from my SAMSUNG-SGH-I897 using XDA App

jimmyz said:
why do you prefer to have superuser installed to /system/data- why not put it in /system/app?
Click to expand...
Click to collapse
I prefer to keep consistent with the idea that user-installed applications go in /data, and stock-installed-and-unmodified applications remain in /system/app. This way, upgrading Superuser.apk doesn't require a root-shell/root-explorer, you can remove it or upgrade it the way you do with any user installed application--adb install, side-loading via an sdcard, or downloading it from the market.
Plus, in general I prefer to keep my /system as untouched as possible. For example, I don't remove stock apps either. The "su" binary has to be installed in /system to persist after a /data wipe, and busybox is best installed to /system so it's in PATH (haven't looked into modifying the default PATH yet). Otherwise I try to keep /system alone.
jimmyz said:
Also if I want to install busybox where is the best location to put it?
Click to expand...
Click to collapse
Android's default PATH provides four places for busybox to be installed: /sbin, /system/bin, /system/sbin, and /system/xbin. /sbin is part of the initramfs, in other words it's controlled by the kernel you're running. You can install busybox to any of the three /system/*bin directories, but I prefer /system/xbin.
In the traditional Unix conventions, "/usr/bin" is for user-runnable stock-installed programs, and "/usr/sbin" is for root-requiring (superuser-runnable) stock-installed programs. "xbin" isn't part of the standard convention, but I'd guess it's intended for "extra binaries" that are not part of the stock installation (much like /usr/local/bin), thus it seems like an appropriate location for a user-added "su" and "busybox" programs.
The second reason is that "xbin" is relatively empty, so if you want to create the applet symlinks (i.e., so that you can call "cp" instead of "buybox cp") it won't overwrite the stock toolbox symlinks. Also, since "xbin" is last on the default PATH, any programs provided by both toolbox and busybox will default to the toolbox version--which would be important for stock system scripts that might run into compatibility issues if they were to use the busybox versions instead.
To install busybox, grab a copy of the binary from somewhere (one click packages, a copy of stericson.busybox.apk, etc.). Then, once rooted run:
Code:
adb push busybox /data/local/tmp
adb shell
su # Authorize on phone screen
cat /data/local/tmp/busybox > /system/xbin/busybox
chown root.shell /system/xbin/busybox
chmod 755 /system/xbin/busybox
rm /data/local/tmp/busybox
/system/xbin/busybox --install -s /system/xbin

jhnstn00 said:
With my captivate we have many update.zip root methods to choose from. Any chance this will be coming to the epic?
Click to expand...
Click to collapse
I don't believe so. The I9000/Vibrant/Captivate have recoveries that don't check the signature of update.zip (as I understand, or maybe they do but only require test keys) which makes rooting-via-recovery possible. Unfortuntaely the Epic and Fascinate do perform signature checks, so we can't enable root via stock-recovery.
That said, the Fascinate one-click methods should also work on the Epic. Although depending on why your friend couldn't get the Epic one-click to work, the Fascinate one may not work either.

mkasick said:
I prefer to keep consistent with the idea that user-installed applications go in /data, and stock-installed-and-unmodified applications remain in /system/app. This way, upgrading Superuser.apk doesn't require a root-shell/root-explorer, you can remove it or upgrade it the way you do with any user installed application--adb install, side-loading via an sdcard, or downloading it from the market.
Plus, in general I prefer to keep my /system as untouched as possible. For example, I don't remove stock apps either. The "su" binary has to be installed in /system to persist after a /data wipe, and busybox is best installed to /system so it's in PATH (haven't looked into modifying the default PATH yet). Otherwise I try to keep /system alone.
Android's default PATH provides four places for busybox to be installed: /sbin, /system/bin, /system/sbin, and /system/xbin. /sbin is part of the initramfs, in other words it's controlled by the kernel you're running. You can install busybox to any of the three /system/*bin directories, but I prefer /system/xbin.
In the traditional Unix conventions, "/usr/bin" is for user-runnable stock-installed programs, and "/usr/sbin" is for root-requiring (superuser-runnable) stock-installed programs. "xbin" isn't part of the standard convention, but I'd guess it's intended for "extra binaries" that are not part of the stock installation (much like /usr/local/bin), thus it seems like an appropriate location for a user-added "su" and "busybox" programs.
The second reason is that "xbin" is relatively empty, so if you want to create the applet symlinks (i.e., so that you can call "cp" instead of "buybox cp") it won't overwrite the stock toolbox symlinks. Also, since "xbin" is last on the default PATH, any programs provided by both toolbox and busybox will default to the toolbox version--which would be important for stock system scripts that might run into compatibility issues if they were to use the busybox versions instead.
To install busybox, grab a copy of the binary from somewhere (one click packages, a copy of stericson.busybox.apk, etc.). Then, once rooted run:
Code:
adb push busybox /data/local/tmp
adb shell
su # Authorize on phone screen
cat /data/local/tmp/busybox > /system/xbin/busybox
chown root.shell /system/xbin/busybox
chmod 755 /system/xbin/busybox
rm /data/local/tmp/busybox
/system/xbin/busybox --install -s /system/xbin
Click to expand...
Click to collapse
You sir are a true gentleman! Thank you for the informative answers- its great to have you over here! I have one more question- why can't I usually push directly to /system ?

jimmyz said:
why can't I usually push directly to /system ?
Click to expand...
Click to collapse
Pushing directly to /system requires running the adb service on the phone as the root user, so that it has permissions to write to that directory. Usually adb runs on the phone unprivileged, so you can only push to world-writable directories.
Running rageagainstthecage-arm5.bin actually changes this. The exploit forces the adb service to run as the root user, which is why "adb shell" gives you a root shell and "adb push" to /system does work, until the phone is restarted.
Interesting enough, the adb service also runs as root by default in the Android emulator. So there's probably a configuration setting, somewhere, to make it do that. In general it's safer to run adb unprivileged though, and "su" to move files to /system once uploaded elsewhere on the phoe.

mkasick said:
Pushing directly to /system requires running the adb service on the phone as the root user, so that it has permissions to write to that directory. Usually adb runs on the phone unprivileged, so you can only push to world-writable directories.
Running rageagainstthecage-arm5.bin actually changes this. The exploit forces the adb service to run as the root user, which is why "adb shell" gives you a root shell and "adb push" to /system does work, until the phone is restarted.
Interesting enough, the adb service also runs as root by default in the Android emulator. So there's probably a configuration setting, somewhere, to make it do that. In general it's safer to run adb unprivileged though, and "su" to move files to /system once uploaded elsewhere on the phoe.
Click to expand...
Click to collapse
I am learning a lot!!! Could you take a look at koush's kernel here, with it I noticed that when using adb I got the # prompt right away and was able to push to /system- maybe he was able to figure out the config settings? Once again thanks!!!
one more ? (feel free to ignore this one) what actually happens when you do
Code:
adb shell /data/local/tmp/rageagainstthecage-arm5.bin
and how does that give you permanent root?

mkasick said:
Pushing directly to /system requires running the adb service on the phone as the root user, so that it has permissions to write to that directory. Usually adb runs on the phone unprivileged, so you can only push to world-writable directories.
Running rageagainstthecage-arm5.bin actually changes this. The exploit forces the adb service to run as the root user, which is why "adb shell" gives you a root shell and "adb push" to /system does work, until the phone is restarted.
Interesting enough, the adb service also runs as root by default in the Android emulator. So there's probably a configuration setting, somewhere, to make it do that. In general it's safer to run adb unprivileged though, and "su" to move files to /system once uploaded elsewhere on the phoe.
Click to expand...
Click to collapse
It is indeed a config option in default.prop. However, this is in the initramfs and you can't change it on the fly, so you need to rebuild the kernel to change it. With some work you can modify the stock kernel to do it, but I personally haven't tried it.
Sent from my Epic 4G using XDA App

Thank you, this worked perfectly for me, running stock DI18 ROM that I flashed tonight!!! I confirmed by installing the wireless tethering pre-9 apk, and successfully ran the wireless tethering without any errors.
Quick question: do we need to do this after root or is it not needed?
NEEDED?? ===> SuperUser App to help with Security Concerns for the Epic - h**p://forum.sdx-developers.com/epic-development/superuser-app-to-help-with-security-concerns/
Also, Titanium Backup failed to work - it gave an error of denied root access, and said busybox was not installed. What needs to be done to make it work? Do I need to install clockwork mod (not exactly sure what it does though) or a custom ROM?

AndroidSPCS said:
Quick question: do we need to do this after root or is it not needed?
Click to expand...
Click to collapse
Not sure exactly what you're asking. This is an alternative to the joeykrim-based one-click roots and rooted kernels. If you already have one of those this isn't really necessary.
AndroidSPCS said:
NEEDED?? ===> SuperUser App
Click to expand...
Click to collapse
Yes, the su binary used here requires the Supruser appto be installed to authorize su requests. Otherwise they'll always be denied. Other su binaries might not require it, but then all apps have root access which isn't really a good thing.
AndroidSPCS said:
Also, Titanium Backup failed to work - it gave an error of denied root access, and said busybox was not installed. What needs to be done to make it work?
Click to expand...
Click to collapse
Did you authorize Titanium Backup when the Superuser prompt came up (requies the Superuser app to be instald too)?
Titanium Backup has an option to download and install it's preferred version of busybox. Follow the prompts to do that.

mkasick said:
Not sure exactly what you're asking. This is an alternative to the joeykrim-based one-click roots and rooted kernels. If you already have one of those this isn't really necessary.
Click to expand...
Click to collapse
Thanks, actually this was referring to the thread where the instructions for going to adb shell or terminal and typing in the following commands:
adb shell
su
mount -t rfs -o remount,rw /dev/block/stl9 /system
cp /system/bin/su /system/bin/jk-su
exit
Yes, the su binary used here requires the Supruser appto be installed to authorize su requests. Otherwise they'll always be denied. Other su binaries might not require it, but then all apps have root access which isn't really a good thing.
Click to expand...
Click to collapse
Yes same as above, the question is not whether we need SU app (I know we do), but whether we needed to type the additional commands:
adb shell
su
mount -t rfs -o remount,rw /dev/block/stl9 /system
cp /system/bin/su /system/bin/jk-su
exit
What do these commands do? It seems to me my Superuser app is working fine with wifi tether - popping up with allow / disable permission boxes, etc. Do these commands add something else to Superuser?
Did you authorize Titanium Backup when the Superuser prompt came up (requies the Superuser app to be instald too)?
Titanium Backup has an option to download and install it's preferred version of busybox. Follow the prompts to do that.
Click to expand...
Click to collapse
There was no Superuser prompt during the install of the app, nor anytime when it said it had a failure with root access. However there is an option to install BusyBox, which I have not done yet, because I am not sure what busybox is, or what it does. I'd like to find out why I need it and what it does, so I can feel comfortable with installing it.
Thanks again.

echo "root::0:0:root:/data/local:/system/bin/sh" > /etc/passwd
echo "root::0:" > /etc/group
you need to do that in a shell to make sure su works properly.
I'm updating the one click root right now to be less silly.

http://forum.xda-developers.com/showpost.php?p=8543226&postcount=455
I just cleaned up the one click root to not do many of the silly things joeykrim's root does. It also means your system will be mounted as rw after a reboot and it won't overwrite your su with jk-su every boot (no more modified playlogo).
Cleaned up all the old stuff from the root so it should work fine even if you were using one of the older one clicks. I made sure su works, incl titanium backup.
I'm still installing superuser.apk to /system/app because I think it belongs there.
Thanks for doing the footwork, mkasick!

Firon said:
http://forum.xda-developers.com/showpost.php?p=8543226&postcount=455
I just cleaned up the one click root to not do many of the silly things joeykrim's root does. It also means your system will be mounted as rw after a reboot and it won't overwrite your su with jk-su every boot (no more modified playlogo).
Cleaned up all the old stuff from the root so it should work fine even if you were using one of the older one clicks. I made sure su works, incl titanium backup.
I'm still installing superuser.apk to /system/app because I think it belongs there.
Thanks for doing the footwork, mkasick!
Click to expand...
Click to collapse
Firon- why are these lines still needed?
Code:
adb push playlogo /system/bin/playlogo
what is playlogo? Does this just put the stock one back in case you used the joeykrim method in the past?
Code:
adb push remount /system/xbin/remount
Are the remount scripts still needed?
Code:
adb shell ln -s /system/xbin/su /system/bin/su
why is this link needed? why cant su just be in xbin
thanks in advance!
Code:

jimmyz said:
Firon- why are these lines still needed?
Code:
adb push playlogo /system/bin/playlogo
what is playlogo? Does this just put the stock one back in case you used the joeykrim method in the past?
Click to expand...
Click to collapse
This is just pushing the stock playlogo, since joeykrim's method overwrites it with some custom script.
Code:
adb push remount /system/xbin/remount
Are the remount scripts still needed?
Click to expand...
Click to collapse
The script allows you to easily remount system as ro or rw at will. Why not?
Code:
adb shell ln -s /system/xbin/su /system/bin/su
why is this link needed? why cant su just be in xbin
Click to expand...
Click to collapse
I don't know if any apps depend on it being in a particular location. It is in xbin, but I'm also linking it to /system/bin to be safe.

AndroidSPCS said:
What do these commands do? It seems to me my Superuser app is working fine with wifi tether - popping up with allow / disable permission boxes, etc. Do these commands add something else to Superuser?
Click to expand...
Click to collapse
These commands were necessary to get Superuser working with the old joeykrim root method. They're not necessary with this method (or the newly released one-click). In other words, if wifi-tethering is already working for you, nothing further is needed to be done.
AndroidSPCS said:
There was no Superuser prompt during the install of the app, nor anytime when it said it had a failure with root access.
Click to expand...
Click to collapse
I don't actually use TitaniumBackup. I'm not sure why its superuser-requirements would be different from other apps, but I guess it is. The new one-click appears to address this.
AndroidSPCS said:
However there is an option to install BusyBox, which I have not done yet, because I am not sure what busybox is, or what it does. I'd like to find out why I need it and what it does, so I can feel comfortable with installing it.
Click to expand...
Click to collapse
Busybox is a suite of "familar" Unix command-line utilites (things like cp (copy), mv (move), ls (list), etc.). It targets embedded platforms by being very featureful, yet relatively small. It's installed and used on a wide variety of embedded devices including wireless routers, print servers, phones, even televisions.
Oddly enough, Android does not include busybox by default. Instead it comes with it's own utility-programs-package called "toolbox" that isn't nearly as featureful, and quickly becomes a pain to use. Some programs, like TitaniumBackup depend on busybox programs/features, and thus require it's installation. It's safe.
The only problem with busybox is that there's not one single version of it. There's multiple builds of it from the same source code with different sets of features turned on and off. In the past, some folks had a version of busybox installed that didn't contain all the features necessary to support TitaniumBackup, so they added the option to install their own version. It's installed in a separate location, so it won't overwrite any version you do have installed, and it's safe to do. But if you've already installed another version of busybox that does work, then it may be unnecessary.

I did the Jokeyrim method a few days ago. I installed a new kernal and now a new ROM. All seems ok, but ow when I do the "whoami" command in adb shell I get whoami not found. I don't think I'm really rooted anymore. Any attempt to reinstall the Jokeyrim root script results in failure (mostly "device not found" errors). When in adb shell, most commands I type now are either "not found" or "permission denied", so I'm not confident that I'm really rooted now.
Since I have / had Jokeyrim installed, how can I "uninstall" it so that I can use this method of rooting instead? BTW, the newest Clockworkmod is installed and working.
Do I need to flash to stock first? Sorry, but I'm a VERY STOOPID NOOB.

[Q] e signature verification failed installation aborted

OK. I have been searching all over the place, and there were solutions, but my phone will not listen to me.
Instructions
1)Download and extract the file below
2)Use a terminal emulator or ADB shell and type.. (or you can use Root Explorer or SGSTools to mount system RW)
Code:
mount -o rw,remount /dev/block/stl9 /system
3)Use a file manager like Root Explorer and copy the recovery file to /system/bin and replace the one there
4)Now, reboot and you should have a modded 3e recovery with no signature verification
Click to expand...
Click to collapse
On the 2nd part, it will not allow me to mount -o rw,remount /dev/block/stl9 /system.
The terminal emulator is not receiving the "superuser permission", since it's not even asking for the superuser permission.
I did not deny the app nor ignore. I tried reinstalling the terminal emulator, same thing happens.
Also I downloaded ROM Manager. It downloaded me the flashclockworkmod recovery, but it will not reboot into that. Instead it shows the regular recovery mode, and when I try to install the update.zip manually, the error shows again despite the fact that I did all the parts except the 2nd step, because my terminal emulator kept getting denied access when I entered that in.
Please help me. I don't know what hard life my phone is going through.

Asked and answered many times. You could have posted in an existing thread. If your phone is not rooted you will not be able to do this.

My phone is rooted. It has superuser app, along with other apps that require superuser permissions.
How would I have done step 3 without my phone being rooted? if by using root explorer?
I just stated that Terminal Emulator is not receiving the "superuser permission".
I don't know how to manually give Terminal Emulator the "Superuser permission" since, it is not asking me for it, as previously in Eclair.

Are you entering
Su
Sent from my SGH-I897 using XDA Premium App

? I am sorry, I did not understand what you said.
on my Su, I have
Allow
AdFree
ROM Manager
SGS Tools
because they asked for su permission.
But on the terminal emu, it does not even ask for a su permission.

to do unrooted you use adb to push
or root it then use root explorer to drop new 3e fix
try uninstalling terminal em and reinstall. you might have pressed back when it asked the first time, that will screw you

When you mean drop new 3e fix, does that mean to delete file and replace with the updatedone on xda?
I did that previously and rebootseveral times before, but same error came up

Thread closed, already answered.

need help rooting flipside

i have a motorola flipside with 2.2.2 installed. somehow it lost its root and will not reroot z4root keeps shuting down and giving some odd error saying The application z4root (process com.z4mod.z4root) has stopped unexpectedly. Please try again and leaves only the option to force close the app. i left gingerbreak running all night and when i woke up it was still running not getting anywhere theyed superoneclick it will not finish im getting very fustrated with this phone i even went as far as asuming somthing on the phone went bad and flashed it to a stock att rom and still cannot get the root to finish and apply. is there some way i can mannualy root this phone? also yes usb debuging is on allow unknown aps to install is enabled

anyone please this dam phone is practicaly useless without a root to me id rather be using my stupid windows 7 phone at this rate because at least it had my ringtones and allowed me to use a different backround image than stock att ones.
---------- Post added at 02:09 PM ---------- Previous post was at 01:47 PM ----------
ok i have come accross this but i am a little lost at the steps
wiki.rootzwiki.com/index.php/Motorola_Flipside
it says to download 3 files psneuter busybox and super user unzip the downloads into the same folder. then it says to open a terminal and change to the folder i dont understand this what am i suposed to to? it then says i need android sdk installed and working witch i do i installed it for android screencast. then it says adb devices but does not say how im suposed to enter this command. after that im fairly sure its from the cmd entering the commands shown on that link. can anyone tell me how to get throgh the first few steps please?
copyed from link
Manual Root
[edit] Download
psneuter: Download
Superuser: Download
busybox: Download
Unzip the downloaded files into the same folder
Open a terminal and change to the folder.
You need the android SDK and ADB working. To make sure type:
adb devices
if your device lists, then you are ready to go!
[edit] Gain Root
Run the following commands:
adb push psneuter /data/local/temp/psneuter
adb shell
chmod 755 /data/local/temp/psneuter
./data/local/temp/psneuter
ADB should hang, wait a little while and then type:
adb shell
NOTE: You should have the "#" sign instead of the "$". If you do, you have temporary root, and can continue on.
Type:
exit
adb push busybox /data/local/temp/busybox
adb shell
chmod 755 /data/local/temp/busybox
./data/local/temp/busybox mount -o rw,remount /system
The last command should return nothing

update i learned how to do the procedure and finished sucesfully however the phone is still not rooted. i did reboot the phone after it seems faster now but not rooted.i downloaded the root checker app and scaned the phone it emailed me a log and here is that log
Root Access is not properly configured or was not granted.
Superuser.apk - com.noshufou.android.su - version 2.3.6.3 is installed!
System Environment PATH: /sbin /system/sbin /system/bin /system/xbin
The adb binary is set to default shell user access as a standard non-root user
Standard su binary location: ls -l /system/bin/su:
/system/bin/su: No such file or directory
Standard su binary location: ls -l /system/xbin/su:
/system/xbin/su: No such file or directory
Alternate su binary location: ls -l /sbin/su:
/sbin/su: Permission denied
Alternate su type binary location: ls -l /system/xbin/sudo:
/system/xbin/sudo: No such file or directory
SU binary not found or not operating properly
Results provided on your MB508 device by Root Checker version 3.7 from joeykrim in the Android Market

is it even posible to root this phone?

i guess im not allowed to be helped or somthing.

i have a procedure here that i had to build up from 2 seperate write ups. i had to use this one http://androidforums.com/droid-all-...oid-without-rsd-lite-up-including-frg83d.html along with this one together http://wiki.rootzwiki.com/index.php/Motorola_Flipside to get it to root properly.
here is what i did. u will need the downloads from both links for this to work i beleive. follow the steps from the second link to gain root once u get to where the number simbole is shown in the command line u need to switch to the instructions in link 1 and start at step 13 and follow to the end. this works to root your flipside when nothing els will work at least for me it did none of the apps that are suposed to root for you worked for me.
thank you me for having to figure this out on my own have fun

Problem rooting
I rooted my Flipside at its stock state and it worked fine. And then I upgraded my software to 2.2.2 Froyo and lost the root so now I am trying to reinstall z4root and re-root the phone but z4root now doesn't work. It gets successfully installed but when I hit PERMANENT ROOT it just stays in that window with the turning wheel and gets stuck there. It doesn't completely root. I've tried the hard reset by pulling the battery, and hitting the back key and forced closing it and then trying it again. Nothing works! HELP!

I once had a flipside. I rooted it the stock rom and then updated to gingerbread and then rooted again. I used superoneclick though. I'm not sure which version, but there is (or was) a flipside forum here on xda with documentation on the entire process.
Edit: here's the forum link: http://forum.xda-developers.com/forumdisplay.php?f=772

jovanphilip said:
I once had a flipside. I rooted it the stock rom and then updated to gingerbread and then rooted again. I used superoneclick though. I'm not sure which version, but there is (or was) a flipside forum here on xda with documentation on the entire process.
Edit: here's the forum link: http://forum.xda-developers.com/forumdisplay.php?f=772
Click to expand...
Click to collapse
Really? I thought the only upgrade I can do to it is from stock to Froyo. How'd you do that? I'm sorry. I am totally untechie. :/

[Q] Titanium Backup not working on my ROOTED One S

Hi,
Today I've unlocked, flashed Paul's CWM recovery, and then rooted my HTC One S.
I've installed SU and Busybox but Titanium Backup still says it couldn't get root privileges. What am I doing wrong?
reupugi

try to update the binarys in SU
if that fails re flash the root.zip file
happened to me yesterday

Thanx for the quick answer.
When I try to update the su binarys it fails saying it "failed to find currently installed su binery...
What does that mean?

uninstall and reinstall the SU app
or reflash the root file as this is supposed to install SU on your device

Well, last night I spent hours trying to uninstall and reinstall su. I've also flashed Paul's root twice but still no luck.. I've tried to install busybox with two different apps but still no luck... Is there any way to roll back everything and start over?

you need to flash the su through cwm. then you can update the app's. You can not just download a app and think that it will root the phone. Look at step 3.
http://forum.xda-developers.com/showpost.php?p=24478083&postcount=1

So I encountered a similar problem (https://github.com/ChainsDD/Superuser/issues/46).
Edit: Of-course it'd make more sense to confirm if this could be the problem first...
Code:
$ adb pull /system/framework/framework.odex
$ strings framework.odex | grep HtcIntentFlag
@test_code: getHtcIntentFlag:
@test_code: setHtcIntentFlag:
addHtcIntentFlag
getHtcIntentFlag
setHtcIntentFlag
I patched the su binary in accordance with the change I observed in the framework and that works for me.
Could the OP please try the following su binary:-
* http://revolutionary.io/one-s/su (md5sum: 83fdeaef210225d7361e6c8eb63bae96)
This will need to pushed from recovery, something like (after ensuring /system is mounted):-
Code:
$ adb push su /system/bin/su
$ adb shell chown root /system/bin/su
$ adb shell chgrp root /system/bin/su
$ adb shell chmod 6755 /system/bin/su
(You can obviously push to xbin/ if you have the appropriate symlink set-up in bin/, etc...etc...)

zylith said:
you need to flash the su through cwm. then you can update the app's. You can not just download a app and think that it will root the phone. Look at step 3.
http://forum.xda-developers.com/showpost.php?p=24478083&postcount=1
Click to expand...
Click to collapse
I've flashed su through Paul's cwm, following steps 1,2 and 3. I did have a problem entering bootloader through shutting sown - power+vol down. For some reason that didn't work, numerous times, so I got into the bootloader through terminal (mac) and command prompt (win 7).

[Working]Root Kindle Fire HD8 6th Gen

Ladies and Gentleman,
I was able to root the HD8 6th Gen using Kingoroot while in airplane mode. I download the executable and ran it directly from my computer. My Fire tablet is on version 5.3.1.1 and was never registered with Amazon. I can run su in adb but the SuperUser app is not working on my tablet. I am looking into replacing the KingoRoot SuperUser app with SuperSU. I suggest you block updates as soon as you achieve root.

look at this thread to see if you can remove Kingroot and replace
https://forum.xda-developers.com/am...rtool-root-t3272695/post69855730#post69855730
This applied to 7" but may be same issue you are having. Note I would suspect you at least need to install the app since you used the PC version but then that might allow replacement fully. The Rootjunky script basically installs supersu and removes the kingroot app following this approach: https://www.droidmen.com/remove-kingroot-kinguser-with-supersu/
So now the questions are:
* Does the app work too or just PC version
* Does a device which has been used and registered with Amazon work? I am on 5.3.1.1, have OTA disabled, have Novalauncher sort of working, and managed to get Amazon to disable the ads lock screen but right now the device does not leave home due to Opendns constraints as I did not want to lose 5.3.1.1 while waiting.

Decided to try this on 5.3.2.1, ran Kingroot for PC few times (version 3.4.0 build 1142). Did not work. Hope it works for you 5.3.1.1 guys.

I believe 5.3.2 can be downgraded to 5.3.1.1 but I also believe 5.3.2.1 is confirmed to not be downgradable.
I was lucky and got my BF unit with 5.3.1.1 and blocked OTA right away

I register to reply this thread and tell everyone that 5.3.1.1 CAN BE ROOT using KingoRoot(not KingRoot)
blocked OTA and planning to place Kingoroot with Supersu now.
go kingoapp.c0m(replace 0 with o) and download the PC one.
Tried APK one but seems stuck at 90% or not enough patient?
---------- Post added at 05:17 PM ---------- Previous post was at 05:12 PM ----------
chemie99 said:
look at this thread to see if you can remove Kingroot and replace
https://forum.xda-developers.com/am...rtool-root-t3272695/post69855730#post69855730
This applied to 7" but may be same issue you are having. Note I would suspect you at least need to install the app since you used the PC version but then that might allow replacement fully. The Rootjunky script basically installs supersu and removes the kingroot app following this approach: https://www.droidmen.com/remove-kingroot-kinguser-with-supersu/
So now the questions are:
* Does the app work too or just PC version
* Does a device which has been used and registered with Amazon work? I am on 5.3.1.1, have OTA disabled, have Novalauncher sort of working, and managed to get Amazon to disable the ads lock screen but right now the device does not leave home due to Opendns constraints as I did not want to lose 5.3.1.1 while waiting.
Click to expand...
Click to collapse
my device is registered with amazon and it works
Detailed instruction on post#38

so what is difference between
kingoroot
and kingroot
??
I am familiar with Kingroot but kingoroot seems to be another animal? Is kingo safe? We have a total of 3 lifetime posts from two accounts who are speaking its benefits....

chemie99 said:
so what is difference between
kingoroot
and kingroot
??
I am familiar with Kingroot but kingoroot seems to be another animal? Is kingo safe? We have a total of 3 lifetime posts from two accounts who are speaking its benefits....
Click to expand...
Click to collapse
honestly I dunno, I'm new to android, just bought the kindle to start playing with android...
but I found it difficult to replace the kingoroot with supersu, when I type su in terminal, it show nothing, can't give root permission to terminal emulator.

I replaced kingoroot with supersu following instruction from androidforums.com/threads/script-replace-kingoroot-with-supersu.919175/
After it's done, supersu doesn't prompt for root access. So I set 'default access' to 'grant' in supersu settings, and it seems to be working.

g4ry12 said:
Decided to try this on 5.3.2.1, ran Kingroot for PC few times.
Click to expand...
Click to collapse
I was not paying attention, it's KingoRoot, not KingRoot. Downloaded KingoRoot for PC (v1.4.9), and tried on 5.3.2.1. Rooting failed, unfortunately.

I ran the PC kingo and rooted.
I then tried to remove and replace with supersu and it failed
I lost root
I tried to rerun Kingo PC but it wanted debugging enabled even though it was
tried the apk kingo (from kingoapp.com; playstore it is a adware hack)
got stuck at 90%
exited and kindle was really sluggish; maybe something to do with my novalauncher or something?
power off reboot and stuck in boot up (Fire image). Now can't boot.
Message is be careful with kingo when removing....will try restore now.
Edit: wiping data and cache did not help. Did brick recovery to 5.3.1.1 (which is what it was on when I got it), and managed to recover. Glad I don't have to send this one back to Amazon!
I will now restart kingo root effort and if it works will report back steps (including supersu replacement).

So I have root according to kingo but "root checker basic" says I do not have root.
Try to open "superuser" (which is a kingo superuser app) and it is just a blank screen then back to Home.
The removal tool that @2ig2ag linked did not work.
It failed on "mount -w -o remount /system" with "mount: operation not permitted"
I also tried to manual cp the su file over and get error "read only file system"
Edit: Despite kingo saying you have root, you don't. At least not complete root. I am unable to copy anything into system/app via ES File explorer too. I am unable to grant programs that want access, that access. For example, Titanium BackUp is unable to detect "Su and Busybox" so no go.
I am able to pm disable the firelauncher for example but that is about it

chemie99 said:
So I have root according to kingo but "root checker basic" says I do not have root.
Try to open "superuser" (which is a kingo superuser app) and it is just a blank screen then back to Home.
The removal tool that @2ig2ag linked did not work.
It failed on "mount -w -o remount /system" with "mount: operation not permitted"
I also tried to manual cp the su file over and get error "read only file system"
Edit: Despite kingo saying you have root, you don't. At least not complete root. I am unable to copy anything into system/app via ES File explorer too. I am unable to grant programs that want access, that access. I am able to pm disable the firelauncher for example but that is about it
Click to expand...
Click to collapse
I soft-bricked once, stuck at fire logo, sideload adb and resumed normal.
I didn't use the root checker to check, the superuser included will crash when I launch it,
but I can su in adb shell..
@2ig2ag's way not work for me either,
I cannot run the script, it said permission denied, then I try to run it manually,
I can remount /system, it do not show any error, but I am stopped at "cp ./su /system/xbin/daemonsu",
it said "daemonsu" text file in use.

tried ultra explorer as another way to get to /system and it just locks up when trying to detect root.
Tried manually installing supersu.apk and it locks up and requires reboot to get back to working device.
@phpbb88 I retried "mount -w -o remount /system" and it worked; maybe I wasn't in su at the time. I get the same error on file copy
So to summarize:
you can: adb su
you can: pm disable fire launcher and OTA (not sure if unrooted allows this too?)
you can not:
write to /system
install any apk that require root and grant root access
switch to supersu
adb remount (fails)
I would not call this a successful root. I am not even sure of the pm disables will last more than 24 hours.

chemie99 said:
tried ultra explorer as another way to get to /system and it just locks up when trying to detect root.
Tried manually installing supersu.apk and it locks up and requires reboot to get back to working device.
@phpbb88 I retried "mount -w -o remount /system" and it worked; maybe I wasn't in su at the time. I get the same error on file copy
So to summarize:
you can: adb su
you can: pm disable fire launcher and OTA (not sure if unrooted allows this too?)
you can not:
write to /system
install any apk that require root and grant root access
switch to supersu
adb remount (fails)
I would not call this a successful root. I am not even sure of the pm disables will last more than 24 hours.
Click to expand...
Click to collapse
I am using a file explorer called "ES File explorer", it cannot view the system file when it is not root.
After Kingoroot, I can view them, but I still cannot create file in /system by using that File explorer.
However I can successfully create a dir in /system in adb shell, shown below.
[email protected]:/system # mkdir 123
[email protected]:/system # ls
123
app
bin
build.prop
data
etc
fonts
framework
lib
lib64
lost+found
media
priv-app
recovery-from-boot.p
sbin
security
sqfs
tts
usr
vendor
xbin
[email protected]:/system #

I have made progress...with kingo install I did this:
copy the files of the kingo root removal to sdcard/kingo
adb shell
su
mount -w -o remount /system
cd /sdcard/kingo
cp ./su /system/xbin/daemonsu
fails because it is locked. Then I started to think that the steps were for the kingo app and not the PC so
with adb window still open, run PC program and remove root
then
cp ./su /system/xbin/daemonsu
chmod 0755 /system/xbin/daemonsu
daemonsu -d &
./step1.sh
got some errors
then sideload the supersu apk via ES file explorer
then allow supersu to do it thing and reboot.
Now I have supersu running!''
edit:
but do I have root?
Titanium backup still fails but ultra explorer does say it has root
now adb shell su fails.....

chemie99 said:
I have made progress...with kingo install I did this:
copy the files of the kingo root removal to sdcard/kingo
adb shell
su
mount -w -o remount /system
cd /sdcard/kingo
cp ./su /system/xbin/daemonsu
fails because it is locked. Then I started to think that the steps were for the kingo app and not the PC so
with adb window still open, run PC program and remove root
then
cp ./su /system/xbin/daemonsu
chmod 0755 /system/xbin/daemonsu
daemonsu -d &
./step1.sh
got some errors
then sideload the supersu apk via ES file explorer
then allow supersu to do it thing and reboot.
Now I have root with supersu!
Titanium backup still fails but ultra explorer does say it has root
Edit: hmmm..
now adb shell su fails.....
Click to expand...
Click to collapse
I cannot run the step1.sh, still show permission denied.
I tried manually, but got another permission error...
[email protected]:/sdcard/Kingo # cp ./su /system/xbin/daemonsu
[email protected]:/sdcard/Kingo # chmod 0755 /system/xbin/daemonsu
[email protected]:/sdcard/Kingo # daemonsu -d &
[1] 8434
[email protected]:/sdcard/Kingo # ./step1.sh
sh: ./step1.sh: can't execute: Permission denied
[1] + Done daemonsu -d
126|[email protected]:/sdcard/Kingo # cp ./su /system/xbin/su
[email protected]:/sdcard/Kingo # chmod 0755 /system/xbin/su
[email protected]:/sdcard/Kingo # ./chattr.pie -ia /system/xbin/ku.sud
sh: ./chattr.pie: can't execute: Permission denied
126|[email protected]:/sdcard/Kingo # ./chattr.pie -ia /system/xbin/supolicy
sh: ./chattr.pie: can't execute: Permission denied
126|[email protected]:/sdcard/Kingo #

after the errors, did you install supersu.apk?
I ignored the errors thinking they were from differences between kingo apk and kingo PC versions of what they put on device.
Supersu does manage to install itself but root checker still says I do not have root.

chemie99 said:
after the errors, did you install supersu.apk?
I ignored the errors thinking they were from differences between kingo apk and kingo PC versions of what they put on device
Click to expand...
Click to collapse
I didn't finish all the steps in step1.sh, cause I have installed SuperSU at the beginning of time,
I then try to run Supersu and it said blahblahblah error, need to reboot my device.
wola, i lost my connection to root adb shell, and now going to root it again

phpbb88 said:
I didn't finish all the steps in step1.sh, cause I have installed SuperSU at the beginning of time,
I then try to run Supersu and it said blahblahblah error, need to reboot my device.
wola, i lost my connection to root adb shell, and now going to root it again
Click to expand...
Click to collapse
I only install supersu as the step after running step1; it worked, and took hold (at least no errors and opening the program looks normal). The issue is that it won't grant access to anything (TB, flashfire, etc)

chemie99 said:
I only install supersu as the step after running step1; it worked, and took hold (at least no errors and opening the program looks normal). The issue is that it won't grant access to anything (TB, flashfire, etc)
Click to expand...
Click to collapse
Kingoroot PC asked me to grant root access to it by pressing OK on my device's pop up when my device is under root,
but my device wouldn't show anything.
Is there any problem on fire OS that wouldn't show this pop up?