please do help me how to install ics through crockwork recovery mode..
-Go to the dev section and download a rooted ICS ROM.
-Put it on the sd card (or where CWM can see it depends on the CWM version)
-Boot into recovery, wipe data, cache and dalvik cache
-Flash ROM
-Reboot
Recommend thread
http://forum.xda-developers.com/showthread.php?t=1494230
Related
I have looked on the site and cant find a complete stock rom for AT&T? If there is one can someone provide a link.
Thanks,
GJ
http://forum.xda-developers.com/showthread.php?t=1548750
So I would just boot into CWM recovery and then install the zip?
1. Nandroid your current setup (so you get back to where you are now)
2. put all the zips you plan to flash on your sdcard
3. reboot to CWM Recovery
4. flash new modem (if you're planning on changing your modem)
5. wipe data / factory reset
6. wipe /cache partition
7. under "Mounts and Storage", Format /system
8. under "Advanced", wipe Dalvic Cache
9. flash rom zip
10. flash kernel zip (if not in rom above)
11. reboot
read through the DEV section under [ROM].. and read the OP (post 1)... each DEV gives recommended steps for flashing zip (CWM) or flashing tars (ODIN). You may also want to use Darkside Superwipe to ensure you clear all previous rom traces prior to flashing new rom.
Hi ! I want to install BioHazard,but after installation i've got loopback.I try to install it through ClockworkMod Touch 6.0.1.2. Also i do wipe data/factory reset,wipe cache partition,wipe dalvic cache anf fromat data system cache.I don't install Gapps.What should i do to install it without loopback.Now i'm on Gigabread
OK, you first of all don't panic !!!
Now, first of all flash TWRP recovery - http://forum.xda-developers.com/showthread.php?t=1694617 from CWM by putting it into SD card and then flashing it.
Now, simply download the Bio Hazard ROM from http://forum.xda-developers.com/showthread.php?t=1917906 , and again put it in SD card.
Now, download Gaaps for your mobile from this URL - http://goo.im/gapps/gapps-ics-20120429-signed.zip
Now, boot into recovery, and then go to Wipe Menu, there wipe system, data ( factory reset ) and all the cache.
Now, go to install menu, and there choose Bio Hazard ROM file that you downloaded into your SD card.
Flash it.
Now, flash Gapps that was in your SD card.
Now simply reboot your mobile !!!
All done your mobile should be working !
Hope I helped you ! :fingers-crossed:
:highfive:
And pls hit the thanks button if I helped you !
hello, go to recovery with the buttons and make conbinazione wipe Dalvik cache and then install the gapps, wipe cache and wipe Dalvik cache and reboot your device ...
i install CM10 Alpha4 then flash gbapps.
suddenly this F****** AOSP android keyboard always popup.
i use this step.but still popup occurs
Stock ROM
1. Flash CWM Compatible Kernel (CF ROOT)
2. Reboot to Recovery.
3. Wipe Data / Factory Reset. (MUST DO THIS STEP)
4. Select the ROM zip from your SD Card and flash.
4a Auto rebooted into recovery, (if show error on mounting /cache, and cant mount manually in mount and storage, do wipe /cache
4b. Go to Advanced -> Reboot Recovery
4c. Select the ROM zip from your SD Card and flash again
5. Go to Advanced -> Reboot Recovery.
6. Mounts and Storage -> Format dbdata ( you wouldn't find this in CWM 6 so just ignor)
7. Flash Google Apps.
8. Reboot
1.flash XXKPE+Pit
2.flash XXKPE without pit
3.flash DDLF2
4.flash CF-ROOT DDLF2
5.goto cwm
-wipe data
-wipe cache partition
-goto advance wipe dalvik cache
6.install cm10a4
-don't reboot
7.install Gapps
8.reboot
9.wait untill 5 minutes
10.final reboot
:good:
i have a problem with my galaxy s019003, i cannot find the keyboard.
Kindly i need help
HOW TO INSTALL CUSTOM ROM ON C2+STEPS:-
Root Your deviceFrom here- v1 & v2
Install Custom Recovery -
Then download install custom recovery of your device.WE Having Two Types Of Recovery-
HERE IS GUIDE FOR INSTALLING CUSTOM RECOVERY--
ClockWorkMod v5.5.0.4 Recovery-
http://forum.xda-developers.com/micr...overy-t2327786
Philz Touch Recovery-
http://forum.xda-developers.com/micr...overy-t2364465
[OPTIONAL]INCREASE PARTIION:-,AS Some custom roms such as xperia full & color os etc. require more space to install so you have to increase system partition.Do this process from here
Download rom and put it in root of your SD card or internal sd.
Backup Your Data & ROM VIA CWM(as your Wish) & reboot into recovery.
Do wipe data and factory reset,then wipe cache partition.
Do dalvic cache clear and the from advance menue format system.
Now go back and choose install from sd card and choose your rom.zip and select install.
After install finish reboot your device or it may reboot automatically.if a patch comes with your rom then install that also.
Finished,Enjoy your new rom,if you Find bugs then ask your rom developer.And If You Like Rom Then HIT THANKS
CREDITS-
ALL THE OP OF LINK MENTIONED ENJOY THE CREDIT.
Sorry mate when i press wipe data/Factory reset.. ..all that happens after is (NO COMMAND)..
oh Got it mate sorry i think i need to root the phone first
hello everyone,
Please I need help with my mini e10i.
After installing an costum rom I can only go to recovery mode and nothing else,it's written CWM-based Recovery v6.0.2.8
and under is:
-reboot mode
-install zip from sdcard
-install zip from sideload
-wipe data-factory reset
-wipe cache partition
-backup and restore
-mounts and storage
-advanced
after I reboot the device it-s only bring me back to cwm mode.
In device manager in my pc it says only Android as driver and cannot find the driver.
What to do??