I sent in a request to Speck on making a case for the One X/XL. I thought it would be a good idea to let you guys know aswell. If you're interested, click the link below and vote on it. Also leave comments on there if you have any ideas on design, but the biggest issue is getting them to know we want a case for this phone!
https://speckproducts.uservoice.com/forums/130547-main-suggest-forum/suggestions/2795137-htc-one-x-xl-case
You can check out their designs for other phones here:
https://www.speckproducts.com/
Signed it. Speck is awesome and our phone needs some love. Would be nice if we had a large variety like the iPhone.
MattMJB0188 said:
Signed it. Speck is awesome and our phone needs some love. Would be nice if we had a large variety like the iPhone.
Click to expand...
Click to collapse
That would be ideal. HTC would have to keep a form factor available for years so that they can mass produce these cases, knowing they'll be able to sell them for a while. Doesn't hurt to have a Hurd of sheep following them like Apple does, too!
Sent from my shiny One XL
added 3 votes for you guys, i doubt i'll get one though...
Wow, that was fast! They updated the status to planned. Whether it was us, I made that request a couple weeks ago, so I'd like to think so. @27 votes, probably 3 per person, 9 people voted in the last 4 hours.
It might still be a good idea to comment on ideas for designs you'd like to see.
Sent from my shiny One XL
Posted this in another thread, but we are actually going to have the speck cases for it in store according to an accessory brief we got today on the One X. One will be the red candyshell and the other will be one of those white Gamer candyshell speck cases. You know...the one with the rubber grippy thing on the back. (Sorry for the nontechnical term, I just got home from that place and I'm exhausted)
i love spec! i had the pixelskin for my iPhone 3G back in the day. best silicone case i'd ever, and have ever, had.
There are two speck cases available from AT&T a candy shell in red and black. Candy shell grip in white and black. They will go on sale when the One X hits stores.
Here are the choices from my local store.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Galaxy Nexus using Tapatalk 2
We received the same cases at my store today as well. We also got in the Zagg shield and some regular anti-glare/anti-fingerprint screen protectors also. I tried the cases on a grey One X and wasn't too happy with the way they looked. I decided to get the grey instead of the white so I ordered a black tpu case off Amazon for like $7 and ordered the Steinheil Ultra Oleophobic screen protector. Hopefully we start receiving more soon, there are a few other options on the Accessory Matcher on our POS systems to place orders for.
Just got the white one from the store for my gray one X. I I like it but don't love it. I'll keep it on for a while then switch later
Sent from my HTC One X using xda premium
I bought the White /Black one and it fits tight, The only problem is when I try and charge the phone up, the plugin does not go in all the way.
I just picked up the red speck candy shell case today. I always liked the candy shell cases and quality. Be forewarned, it is incredibly difficult to get the HOX inside this case.
Sent from my HTC One X using xda premium
jrodsep said:
Here are the choices from my local store.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
i got that orange one on the left... don't think it'll provide any protection, but it makes my grey one x look like a tiger. so, even tradeoff.
i'll wait for more cases to come out and get something slim/with more protection eventually.
Pumpiron579 said:
I bought the White /Black one and it fits tight, The only problem is when I try and charge the phone up, the plugin does not go in all the way.
Click to expand...
Click to collapse
I got the same one. I love that its keeps the screen and camera off the table when I set it down. Digging the grips too.
I have no problem putting the charger in. You might want to check that it's in all the way.
Sent from my HTC One X using Tapatalk 2
Just bought the red/black one for my wife's phone. One question, how the hell am I supposed to put this case on?
Sent from my Galaxy Nexus using Tapatalk 2
phatboypat said:
I got the same one. I love that its keeps the screen and camera off the table when I set it down. Digging the grips too.
I have no problem putting the charger in. You might want to check that it's in all the way.
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
Yea, I just had to wear it in. Goes right in now
I want that black and white speck case but can't find anywhere to get it in Canada. Anybody have any ideas where I can get it from? Does AT&T online ship to Canada?
These speck cases are great, but why did they make them so hard to take off? I thought I was going to snap my phone in half while prying the top off.
Can somebody with the black & white speck case post pics with there phone inside. I'm really interested in the case but don't want to spend near $40 bucks if i can see how the phone looks with the case inside.
---------- Post added at 09:54 PM ---------- Previous post was at 09:52 PM ----------
JamesR913 said:
Just got the white one from the store for my gray one X. I I like it but don't love it. I'll keep it on for a while then switch later
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Can you post some pics?
Related
Look at this!
A friend bring me two of this case from a travel in Singapour!
Look at imak hk on google, then research htc pyramid!
And look at on ebay!
The material is very great and finition is great!
I would like to post a direct link but i need to wait 8 post!...
I'm new here,and i hope to participate actively in this forum!
http://www.imak.hk/imakadmin/edit/UploadFile/2011523173554953.jpg
Looks ok, its a different color than some of the other sellers in ebay that sell out of hong kong as well. What is the price of these and what are the shipping rates. And where would one buy this case? Ebay or another site?
That one is nice, very similar to this one http://www.obostore.com/nillkin-ultra-slim-hard-shield-faceplate-for-htc-sensation-p-1130-c-141.html
nice cases
I like these cases
StefanB86 said:
That one is nice, very similar to this one http://www.obostore.com/nillkin-ultra-slim-hard-shield-faceplate-for-htc-sensation-p-1130-c-141.html
Click to expand...
Click to collapse
where are the kickstands?!? this is billed as an uber multi media phone and 1. it does not come with a kickstand to watch movies and 2. I have not seen any kickstand cases outside of the bulky body glove one. This is infuriating to me.
Hello harnahud,
Well a little late but welcome on xda! Just one quick question, what case color have you bought? I wanted to by one of these (nilkin) but not sure about brown or black...
They dont have the holes in them like the other cases. I read somewhere that they were needed, that some cases were pulled due to no holes. the 3 at the top 2 at the bottom...
nugzo said:
They dont have the holes in them like the other cases. I read somewhere that they were needed, that some cases were pulled due to no holes. the 3 at the top 2 at the bottom...
Click to expand...
Click to collapse
Here you go a case that will eradicate the hole issue lol....
Honestly I actually like these. But I have the barely case types from ebay that are coming in too. And yes they have the holes in the appropriate areas as well...wow that sounded perverted lol....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
swissman said:
Hello harnahud,
Well a little late but welcome on xda! Just one quick question, what case color have you bought? I wanted to by one of these (nilkin) but not sure about brown or black...
Click to expand...
Click to collapse
I have the red one,and the color is very nice.
I searched nilkin case on eBay, and i prefer the black one.
harnahud said:
I have the red one,and the color is very nice.
I searched nilkin case on eBay, and i prefer the black one.
Click to expand...
Click to collapse
nillkin one uk ebay with free a mesh case
http://www.ebay.co.uk/itm/150625136...36007&_sacat=See-All-Categories&_fvi=1&_rdc=1
For the mesh case, I got one for my previous HD2, and it stained the back (soft rubbery surface part). My colleagues got one such red hard case (not mesh) and it happened to her Desire as well.
Now I am rather weary of using such coloured hard case..
Only thing I don't like about these barely there type cases, is they are a royal pain to get on and off. Pair it with ghost armor and your device is bulletproof! But good luck pulling the battery lol.
Sent from my HTC Sensation 4G using XDA App
Does anyone know where to order these when u want it delivered to Europe coz im dying to have one.
Sent from my HTC Sensation Z710e using XDA Premium App
http://cgi.ebay.fr/HTC-SENSATION-IM...sses_coques&hash=item256562662a#ht_500wt_1156
the only one you can find in Europe!!!!!
Thanks man...
That was not really cheap. 10 euro the case and 10 more 4 postage.
Just experienced a cold shower here.
Thank you for bothering anyway.
Sent from my HTC Sensation Z710e using XDA Premium App
Barely There knock-off:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=110706056708&ssPageName=STRK:MEWNX:IT
Excellent price, delivery nearly everywhere. Delivery took 12 days to US, and shipping is free.
Just received mine and it's as advertised. Getting my replacement Sensation tomorrow so haven't tried the case on the phone yet, but it looks like it will be very good. Very thin, which is what I wanted. Holes are cut in the case for each switch and hole on the phone.
I'll update once I've installed it and used it more.
TheOne741 said:
Thanks man...
That was not really cheap. 10 euro the case and 10 more 4 postage.
Just experienced a cold shower here.
Thank you for bothering anyway.
Sent from my HTC Sensation Z710e using XDA Premium App
Click to expand...
Click to collapse
I would have to agree, the prices seem a little out of whack in relation to other products out there. The seller would really have to list key deferential features from their product to others being sold to help me understand the price difference.
Plus it looks like you would have to wait close to a month before having the product in hand, that to me is a really long time.
I just bought the knock off one from ebay and it arrived yesterday. Works well for me. Im waiting for the mesh black one. I had that on my desire and now the sensation. It feels better in my hand than the non-mesh one
aznknightz17 said:
I just bought the knock off one from ebay and it arrived yesterday. Works well for me. Im waiting for the mesh black one. I had that on my desire and now the sensation. It feels better in my hand than the non-mesh one
Click to expand...
Click to collapse
I look at those mesh cases and imagine how much dust and gunk will accumulate in the holes in a month or two or three. May feel good, but don't they get nasty after a while? Just take it off and wash it out?
They advertised this phone as not needing a case.. Well? I'm dying for a beautiful phone that i dont have to cover up and make bulky with a case. Mine will be here Monday..Till then, what do you guys think? Will you be using a case or not?
I thought they only advertised the HTC One S as not needing a case. And specifically, only the ceramic coated version of the HTC One S, not the blue version sold by T-Mobile here in the states.
nugzo said:
They advertised this phone as not needing a case.. Well? I'm dying for a beautiful phone that i dont have to cover up and make bulky with a case. Mine will be here Monday..Till then, what do you guys think? Will you be using a case or not?
Click to expand...
Click to collapse
Lies. All lies. It needs a case. Wear makes the matte finish come off and leaves shiny spots in its place. It's a lot more noticable on grey.
http://forum.xda-developers.com/showthread.php?t=1635668
I want one with a kick stand, those look bad ass
Sent from my Xoom using xda premium
i actually think the phone looks better with those minimalistic cases where you can only see the sides from the front such as this one
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
stereotada said:
i actually think the phone looks better with those minimalistic cases where you can only see the sides from the front such as this one
Click to expand...
Click to collapse
Where did u find that one
Sent from my HTC One X using xda premium
While in general I prefer not to use cases, that last one was pretty nice. I'm waiting to see if we get any nice minimalist cases for the One XL
Try their official cases/shells...very nice!
Also, check the accessories threads.
Sent from my HTC One X using XDA
So the polycarbonate isn't a solid color all the way through? Is this true of the white one as well?
gunnyman said:
So the polycarbonate isn't a solid color all the way through? Is this true of the white one as well?
Click to expand...
Click to collapse
Its the same color all the way through, its just that the finish on top of the polycarbonate can wear off and make it shiny from what I've read.
Where are you guys buying the official cases? I can't find a place that has them in stock.
Sent from my HTC One X using XDA
ErikWithNoC said:
Its the same color all the way through, its just that the finish on top of the polycarbonate can wear off and make it shiny from what I've read.
Click to expand...
Click to collapse
after seeing a Mythbusters rerun last night I'm gonna coat my phone in Line-X bed liner material
SO it sounds like if I want to go case-less the One to get (see what I did there?) is a white one.
chrikenn said:
Where are you guys buying the official cases? I can't find a place that has them in stock.
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
Right now at att...they have the orange one and the blue official HTC ones. Expansys will have a few more different ones in the coming weeks.
Sent from my HTC One X using XDA
Artimus009 said:
Right now at att...they have the orange one and the blue official HTC ones. Expansys will have a few more different ones in the coming weeks.
Sent from my HTC One X using XDA
Click to expand...
Click to collapse
Nice thanks for the info.
Sent from my HTC One X using XDA
gunnyman said:
after seeing a Mythbusters rerun last night I'm gonna coat my phone in Line-X bed liner material
SO it sounds like if I want to go case-less the One to get (see what I did there?) is a white one.
Click to expand...
Click to collapse
Agreed, my white is being a champ, no stains.
And the causeless phone was the One S
Phone....... So...... Pretty...... Cannot...... Ruin.... It.... With...... Case.....
Sent from my HTC One X using Tapatalk 2
I got the OtterBox commuter case.
yes it takes away from the pretty pretty white. but I spend months at a time in St. Kitts. If my phone is to have any chance of survival is needs a case and I was pressed for time last week (I left for st. kitts today) so I had to buy the case at the Cor store. I wanted to get the Ballistic SG case as I've had nothing but success with those and that too at 10 dollars cheaper but then I realized it might not fit right because the ATT One X is slightly taller than the HTC One X
:x
all in all the otterbox is really good and with the gel + plastic case design it seems like it'll survive a drop. Those blue and orange (figures those'd be the colors) Shell Cases they're selling don't seem like they'd do jack and at 30 bucks are possibly the biggest rip off at the store. (the store was also shocked when I showed up on thursday with the phone asking for a case, it was a special sort of envy lol)
oh and for those curious, I ended up getting the phone free of charge (true to form i'm a customer 15+years) but if you call 611 and ask politely they'll almost always give you some sort of discount on a non apple phone. it's always worth a shot
I cant wait for the day when no cases are needed. I guess i'll get one of those thin hard plastic barely there cases. Like the one below but white. they dont protect the screen from a direct hit but you normally need something pretty bulky for that. And remember keep your phone cases clean. Seen a show that said phone cases have more germs than anything we touch on a daily basis.. Everything we touch gets transfered to our phone cases. I have a white barely there case for my sensation that i throw in a bowl of bleach every few weeks for an hour or so. Cleans it up, makes it bright white again. Cant be one of those cheapo painted cases though... wont hold up!
You need a case or else your camera lens will get scratched by being laid down and slid around on surfaces
Bigjim1488 said:
You need a case or else your camera lens will get scratched by being laid down and slid around on surfaces
Click to expand...
Click to collapse
Actually, that's sort of the point of the protruding camera. By sticking out, it forces the glass off of any surface. Rather than the entire back (including camera glass) being a wear point like the iPhone, there are only two wear points on the One X. The first is at the bottom of the phone and the second is right at the lip of the camera ring.
sassafras
I cant wait! Defender and commuter. Will fit the ATT and int models.
Talked to 3 different reps over the last few days and all confirm its in system.
They're already out. Buy online.
Sent from my HTC One X using XDA
They were selling them when I went into the store yesterday
links? Anywhere i look it says pre-order.
equlizer said:
links? Anywhere i look it says pre-order.
Click to expand...
Click to collapse
http://www.wireless.att.com/cell-ph...id=all&q_manufacturer=htc&q_model=prod5890250
I should have said i was in canada. I got the canadian flag
Guess ill just wait a few weeks
It's hard to tell from the pictures on at&t's website, but the black one is black/GREY which is a deal breaker for me, pretty unattractive when you see the case from the front.
I'll wait for black/black to be in stock on amazon.
ordered the black and grey yesterday, still says processing, hoping it ships soon
Well they finally listed it on their website as "coming soon" (Defender)
bob436943 said:
ordered the black and grey yesterday, still says processing, hoping it ships soon
Click to expand...
Click to collapse
Ditto accept ordered it on the 9th...
Sent from my HTC One X using Tapatalk 2
Just got my shipping notification from AT&T on my Defender case.
Shows like its back in stock on att's website. I also just received my tracking info. Let's see how this baby looks in person.
Sent from my HTC One X using xda premium
Aldiggi said:
Shows like its back in stock on att's website. I also just received my tracking info. Let's see how this baby looks in person.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Thanks! Just put in my order now. BTW if anyone goes into the store they have a promo going on right now for accessories. $20 off $100, $40 off $150 and $60 off $200. I ordered two out of stock car docks and the otterbox, and with the discount made my otterbox $10
Sent from my HTC One X using Tapatalk 2
Bought commuter a week ago...took it back though...too big for my taste...$30 at att..
Sent from my HTC One X using xda premium
austin4913 said:
Bought commuter a week ago...took it back though...too big for my taste...$30 at att..
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
Given my job in public safety and my severe interest in mountain biking and snowboarding, the defender will manage my hobbies better than my HTC pouch.
I have the blue commuter case from AT&T's store. It's big, but worth it IMO. Wish they carried the black or at least gray version, but whatever. Zagg screen protector and Otterbox Commuter is a nice combo. I've already dropped it once though lol
My local AT&T store happened to have the Defender case in stock so I picked one up and they are really nice. I'm amazed at how much thinner Defender cases have gotten. I guess Otterbox decided to use their "new" silicone for the One X case and it has a lot of grip and doesn't seem to attract lint as much.
On the downside, while Otterbox makes great holsters, they decided to put two contact points on each side which makes it difficult for a quick release. Also, the built-in screen protector is still a bad idea.
Al in all, even with the high price and a couple little quirks it's a great case and will probably be my primary case.
---------- Post added at 08:54 AM ---------- Previous post was at 08:13 AM ----------
Here are some pics:
This is of the bulk difference between the Ballistic and Defender
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Here is one of the "points of contact" I mentioned above, it's like that on both sides
And here are a few more shots
---------- Post added at 09:30 AM ---------- Previous post was at 08:54 AM ----------
EDIT:
For anyone who decides to remove the built-in screen protector, it seems like a simple operation. I went to cut it out but it just popped out and then I was able to remove the glue strip in one shot. See pic below:
Great pics! thx...
how much harder is it to get out of the holster now with the 2 contact points? Is it a real pain in the a$$?
could you take a picture of the other side so i know what the clip system looks like? would be awesome
equlizer said:
Great pics! thx...
how much harder is it to get out of the holster now with the 2 contact points? Is it a real pain in the a$$?
could you take a picture of the other side so i know what the clip system looks like? would be awesome
Click to expand...
Click to collapse
The clips on the other side look exactly the same. I don't know why they didn't just use a "cradle" on one side with a single, centered clip on the other (like they usually have done before).
Just received my case. Very well put together minus the holster issues which I do not use but I do understand for those who do and pulling down the notification bar is tricky as the top is somewhat blocked by the gray front plastic part of the case. Other than that great case and happy I don't have to be paranoid about dropping my phone.
Sent from my HTC One X using xda premium
Fits like a glove as it is meant for the ATT/Rogers version. All holes line up. The rubber is tougher and less shiny than the normal rubber otterbox uses (which i thought thank god) The only thing i dont like/not used to yet is how the phone mounts into the belt clip. You have to slowly "wedge it out" Here are some pictures. Any questions? The temperature after playing a game for 25 min is 43c (without case it was around 39c)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Whats your opinion on the power button? Is difficult to press?
Very easy. I notice i dont have to push as hard as my ebay rubber case i had before. Volume buttons are also easily pushed. The screen protector takes a bit away from the clarity. Still debating on popping it off or not.
i have the COMMUTER and its an AWESOME case...they just released it today Monday June 4th Wouldnt use any other one...
equlizer said:
Very easy. I notice i dont have to push as hard as my ebay rubber case i had before. Volume buttons are also easily pushed. The screen protector takes a bit away from the clarity. Still debating on popping it off or not.
Click to expand...
Click to collapse
I recommend just popping it out, especially if you already use a screen protector. It comes out rather easy and the adhesive strip can be pulled out in practically one piece. The only thing I would suggest is to use something like a small piece of duct tape to remove the left over residual adhesive from inside the frame.
Does anyone have the purple and teal otterbox? I really want one!
Sent from my HTC One X using Tapatalk 2
They have not been released anywhere yet. ATT nor Otterbox carry them yet. I was told within the next few weeks.
It depends on your area, because most ATT store here in Hawaii had both Commuter and Defender Cases, I originally went with the commuter case but felt it added too much thickness and took away the design of the phone, so bought Htcs slim case. The have improved a lot in terms of rubber material and fit, especially coming from the evo 3d case.
Sent from my HTC One X using XDA
im interested in the commuter....may pick one up. but im usong the ballistic sg right now and i have no complaints at all...best feature is somehow this ballistic case makes my power button feel perfect :-D i hate how it feels without a case!
Sent from my HTC One X using xda premium
I'm using the Defender too. Love everything about it except the screen protector. It makes the screen look glittery, for lack of a better word.
I use this very similar to otterbox and has a kickstand.
http://www.ebay.com/itm/270983424051
I just got a one x and a defender case. Great combo! I love how the rubber isn't so tacky. It's easy to get in and out of my pockets.
Sent from my HTC One X using xda premium
skatin707 said:
I just got a one x and a defender case. Great combo! I love how the rubber isn't so tacky. It's easy to get in and out of my pockets.
Sent from my HTC One X using xda premium
Click to expand...
Click to collapse
I agree. Its more stiff and more textured it seems. Lint doesnt want to stick to it Did you get the grey/black or black/black?
I got black/black and paid $45. I know, I got screwed lol
Sent from my HTC One X using xda premium
i paid $50 + $13 shipping so no you didnt get screwed Thats the price i pay for being a canadian
I got mine in store with no tax. Gotta love Delaware
Looks good but so bulky...
an_xda said:
Looks good but so bulky...
Click to expand...
Click to collapse
Exactly what i was thinking. I would have to try it to see if I would like it.
Sent from my HTC One X using XDA
For the Canadians Out There
I picked up the Commuter from this site. It was legit.
http://www.gocellular.ca/htconex-cases
I don't work for them, found them on another forum.
Shipping takes a while if you pick the cheapest option.
Just checked and shipping is free on some of the otterbox cases....
I paid $1.99 shipping and it took 5 Business days from BC to Ontario
LNKNPRKFN said:
i have the COMMUTER and its an AWESOME case...they just released it today Monday June 4th Wouldnt use any other one...
Click to expand...
Click to collapse
I'm trying to find the black commuter case for my rogers one x.
Where did you buy yours?
Hey guys, i've finally found a case i'm satisfied with. I've been looking for cases around on ebay, always buying those random 2 dollar-10 dollar tpu crap.. and was never happy because it made my phone feel bulky. After a lot of research, I found the Incipio feather ultra thin case for about 22 dollars. Its a lot more than what i would spend on a case but I guess i can say its worth it. It feels ONE WITH THE PHONE. Its light, feels strong and sturdy... just simply clean and elegant. The feel to the case is like a strong sturdy plastic for the structure, and the surface touch is like a premium rubber type material with a matte feel
here are some pictures just because I love this combination so much, hopefully it'l work out for you guys too..
remember to click thanks!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
remember to click thanks!
I have one of these...super annoying how it covers the USB port along the front edge. Only the OEM cable works...and even then just barely. Other cables I have won't stay plugged in. Stopped using it due to this.
I wish this didn't cover the USB port as much. Would be great to use around the office.
Right now, I'm using their Silicrylic and love it.
slippers67 said:
I have one of these...super annoying how it covers the USB port along the front edge. Only the OEM cable works...and even then just barely. Other cables I have won't stay plugged in. Stopped using it due to this.
Click to expand...
Click to collapse
yeah thats true, but im fine using my oem cable, it fits perfectly
i hate using the squared 2dollar ebay cables, they feel cheap
Looks just like the Casemate barely there case that I have. Only difference is that there's no upper lip on the Casemate.
Hmm I like it, very nice. I like how it doesn't cover the top or bottom, or come over the edge too much(around the rim of the phone). Thanks for the info.
Does it cover the camera enough so you can lay it flat on its back?
I might get one.
Sent from my HTC One XL using Tapatalk 2
ECEXCURSION said:
Does it cover the camera enough so you can lay it flat on its back?
I might get one.
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse
Yes
Sent from my HTC One X using xda premium
Now.. do I get the black or grey version for my HOX..
ECEXCURSION said:
Now.. do I get the black or grey version for my HOX..
Click to expand...
Click to collapse
The grey looks really cool
So cases like these... If you drop the phone screen first it'll probably shatter. My question is do you think that the tpu cases that have a tinyyyyy amount of lip would protect the screen any more?
I have a case that I'm wary about using because it doesn't have the lip around the screen.
Where'd you buy your case from?
Still don't know what color to get... Prolly end up with grey.
Sent from my HTC One XL using xda app-developers app
ECEXCURSION said:
Where'd you buy your case from?
Still don't know what color to get... Prolly end up with grey.
Sent from my HTC One XL using xda app-developers app
Click to expand...
Click to collapse
i got it on ebay, for about 22 bucks, yeah the gray one is nice, i've always wondered about the black one though since it contrasts the white one x, but gray works!
vioalas said:
So cases like these... If you drop the phone screen first it'll probably shatter. My question is do you think that the tpu cases that have a tinyyyyy amount of lip would protect the screen any more?
I have a case that I'm wary about using because it doesn't have the lip around the screen.
Click to expand...
Click to collapse
about the case not covering the whole phone it does protect it pretty well. the corners rise slightly up higher than the screen. if it falls, most likely it would fall on a corner, or slanted right? what are the odds of the phone landing flat on the screen, perfect 180degrees? but if it does happen to land on an EDGE of a stairs, or a rock(flat face down again) then yeah that might be a problem
but yeah i recommend this case if you want to keep the sleek thin feel of the one x, cant stand thick tpu cases on big screened phones, its like carrying a brick
I just ordered the grey one from amazon. I figured everyone has a black case so grey might look good with my phone. Especially if it's the same color as the grey HOX. Can't wait for it to arrive.
Sent from my HTC One XL using xda app-developers app
Can you take some pics when it comes in? About to pull the trigger. I love my Silicrylic case but want something for the lighter days at the office etc.
Sent from my HTC One X using Tapatalk 2
I'll see if I can borrow my roommate's phone to take some pics. I don't have another camera aside from my HOX.
Sent from my HTC One XL using xda app-developers app
If this had a belt clip I'd jump on it
Sent from my HTC One XL using Tapatalk 2
ECEXCURSION said:
I'll see if I can borrow my roommate's phone to take some pics. I don't have another camera aside from my HOX.
Sent from my HTC One XL using xda app-developers app
Click to expand...
Click to collapse
You can rig up like 6 mirrors and get some great shots.
Sent from my HTC One X using Tapatalk 2
Ya know.. I thought about using a mirror for half a second.. and then I realized I must be super tired.
Sent from my HTC One XL using xda app-developers app
Bah, Amazon's tracking number says this won't be here until Friday. 3 day shipping, bah! Thanks Amazon, Thanks.