Database Info

[ATT dev] Kernels Causing Wired HEADSET ISSUES!

I noticed some Kernels have different issues with wired headset.
Headset cuts my voice during voice calls
Auto dials and auto pulls call log
Headset button doesn't work
anyone notice strange behavior with your headset plugged in? Lets make a list of issues to make it simpler for devs to find a solution.
Any solutions? (one is to use stock kernel which is linked in this thread)
Post your issues with wired headset and please note which kernel is acting up. maybe we can combine code from different kernels to make one that works. (I noticed that some kernels have one issue but not the other)
Thanks for all your support and great work everyone is doing on the Epic!

Yes, I noticed the behavior between different kernels (using stock ROM). I know for a fact that with Xtreme Kernel, it disconnects my calls whenever I plug in my headset. The devs say to use only with ACS ROM, but given that the kernel is the bridge between the hardware and software, I doubt the ACS ROM would fix the issue.
I forgot what happened with the other kernels. I settled with Pheonix for now at the conservative governor (interactive sometimes leaves the CPU running at 100MHz and wont ramp up).
Seems we wont be getting any fixes for a while. All the kernel devs are having too much fun playing with Froyo.

Glad I am not the only one! Lets see if we can work this out! Using your phone without headset will give you BRAIN CANCER! Plus its more convenient with a headset when I have to deal with clients.

had problems using epic experience w/ mixup kernel and the latest Xtreme

I can confirm that wired headset handling is kind of fubar in our community kernels. Samsung had made some bugfixes between DI07 -> DI18 versions, but those changes don't appear to have been added to the DI18 source code.
Have any of you tried using the stock DI18 kernel to test this? If it works properly, then we have to cross our fingers and hope the issues don't persist in the kernel shipped with Froyo - as it stands there's no way to know what changed to fix this stuff easily in our community kernels.

The only time I ever gotten headset to work with phone mic was using stock rom and stock kernel after an odin.

effudee said:
The only time I ever gotten headset to work with phone mic was using stock rom and stock kernel after an odin.
Click to expand...
Click to collapse
Yep, that's the exact issue with the missing changes in the source Samsung released.

effudee said:
The only time I ever gotten headset to work with phone mic was using stock rom and stock kernel after an odin.
Click to expand...
Click to collapse
It's only the custom kernel(s) that cause this issue...flash whatever rom you want, flash the stock kernel and you should be good to go...
also, FYI, already a thread on this issue here:
http://forum.xda-developers.com/showthread.php?t=771861

any link to stock Kernel? would be good if we could find a solution for the custom kernels, Is there any other way to install stock kernel besides restoring stock rom through ODIN?

lucifermoh said:
any link to stock Kernel? would be good if we could find a solution for the custom kernels, Is there any other way to install stock kernel besides restoring stock rom through ODIN?
Click to expand...
Click to collapse
Don't recall where I got it from but here is the stock DI18 kernel...

ScientificOne said:
It's only the custom kernel(s) that cause this issue...flash whatever rom you want, flash the stock kernel and you should be good to go...
also, FYI, already a thread on this issue here:
http://forum.xda-developers.com/showthread.php?t=771861
Click to expand...
Click to collapse
Oh really? I remember trying andromeda with stock kernel and it still didn't work for me. I'll try Syndicate with stock kernel eventually then. Thanks for the information

thanks for the zip!!! any idea if devs are aware of this issue?

lucifermoh said:
thanks for the zip!!! any idea if devs are aware of this issue?
Click to expand...
Click to collapse
I doubt it. I posted my bug on the Xtreme Kernel thread and Devin never responded. The only response I got was to use a specific ROM .

Yes, well at least this one is. I'm examining the audio right now to try and hunt down a fix for this and the bluetooth routing bug.
The leaked 2.2 still has the bluetooth bug afaik. I'm hoping samsung releases this fix with their source next time.

Using extreme kernel and when i plug in AUX cable for audio to my car it isnt recognized as a headset.

You mean it doesn't pop the icon in the notification bar, or that it doesn't play audio?
Nothing I plug in pops the headset icon when using a custom kernel - not even the wired headset. Pretty sure it's another symptom of the bug.
[edit] Nor in the froyo stock kernel. /shakes fist at samsung!

[ROM][CM10][CWM] [01-nov-2012] Unofficial CyanogenMod 10 port

*DISCONTINUED*​
CyanogenMod 10 PORT for Galaxy Note II​
This is a port of CM10 originally made for galaxy SIII by Team Hacksung, this is NOT a daily driver (yet).
this port is still using stock kernel from latest release from samsung, but an alternative featured kernel is considered now.
Code:
[U][CENTER][B]What WORKS[/B][/U]
Microphone
3G
audio
h/w video acceleration
gps
wifi
bluetooth
phonecalls
sms
internal / external storage handling (at /storage/sdcard0 and sdcard1)
light in softbuttons, but seems not to auto wake up,
but is adjustable in advanced -> settings
games seems to work fine.[/CENTER]
Code:
[U][CENTER][B]Not working[/B][/U]
Camera
MTP connection to windows
[/CENTER]
​
DOWNLOADS
2012-10-08 v2 build here [MD5] - 5054a0c87244165757743fb4a3c0cc27
See this post for the MIC patch to make calls working . Thanks to imilka for the patch and fixing audio issue
download gapps from
here​
Previous updates
2012-10-08 build here [MD5] - 0ccd094f093529a08c928d53848e24d3
2012-10-06 build here [MD5] - 3f0e5e46a2320abf03cd126ea9269bf6
Click to expand...
Click to collapse
Instructions
Firefox users: if you get the warning of adware or bloatware, IGNORE and press i want to continue, my files are pure zips for android,
and nothing to be executed on your pc
Install ROM through ClockWorkMod (CWM).
It will require you to WIPE / factory reset, if you are installing this for the first time on your GNII ,
since its completely different from a stock rom.​
Click to expand...
Click to collapse
THANKS TO
Click to expand...
Click to collapse
Team Hacksung for the original compile
imilka for the MIC patch

since i uploaded this one, audio is now starting to work
I am hoping to update with a better edition very,very soon.

Screenshots
Sent from my HTC Ruby using xda app-developers app

skugpezz said:
Screenshots
Click to expand...
Click to collapse
i personally believe a stock AOSP CM10 without mod, is pretty much stock and pictures can be found all over xda.
its really not graphics changing here, its a CM10 release.

Uploading next update,
audio fixed, graphics bug gone, hardware video playback and youtube HD , tested and works.
what seems not working now
light in soft buttons.
Microphone (someone knows the /etc/sound/ tinyHAL config and a solution?)
camera (reboot's mobile)

Great work, will try it soon

you have a pm Dexter

Awesome!
It's a great on your doing, and I'm sure someone could help you with audio / you'll figure it out
Sent from my Desire HD using xda app-developers app

note,
if you got version 20121006 when downloading from link, please refresh Post #1 and get todays 20121008 edition.

I've read AOKP comes from CM, or is based off CM. so today, this is the closest thing we will have to AOKP? :>
thanks for the up :good:

Great thanks for your work
what gapps version i need pls?
i think the jb20120726
********EDIT***********
Have installed with the gaps jb20120726
looks and works fine for the first moment
Have this rom like the sgs3 a memory leak?

entwicklun said:
I've read AOKP comes from CM, or is based off CM. so today, this is the closest thing we will have to AOKP? :>
thanks for the up :good:
Click to expand...
Click to collapse
yes, its close, but it is not AOKP based. its based on the CM10 i9300 edition distributed on nightlies i9300.
hasbai said:
Great thanks for your work
what gapps version i need pls?
i think the jb20120726
Click to expand...
Click to collapse
yes, i used 0726 personally here. i believe it depends on usability , testing and compatibility.

my 64gb sandisk card is accepted without any problems (its formated with fat32)
and can restore my app backups with titanium bacup
only app2sd dont work
dont show the sdcard

entwicklun said:
I've read AOKP comes from CM, or is based off CM. so today, this is the closest thing we will have to AOKP? :>
thanks for the up :good:
Click to expand...
Click to collapse
I have an attempt at an aokp port but i don't have a note ii to test it. Lol.
Sent from my HTC Rezound using xda app-developers app

delete

awesomeness !
flashed "2012-10-08 v2" but
1) dialer/phone is not working at all, can't make calls, no audio via bluetooth either.
2) phone was getting VERY hot !
will keep a very close eye on this as it develops. !

hasbai said:
Have this rom like the sgs3 a memory leak?
Click to expand...
Click to collapse
any feedback re this ?

Cool!! The note 2 is gaining ground really really fast! Thanks.
Sent from my GT-N7100 using Tapatalk 2

ipguy said:
awesomeness !
flashed "2012-10-08 v2" but
1) dialer/phone is not working at all, can't make calls, no audio via bluetooth either.
2) phone was getting VERY hot !
will keep a very close eye on this as it develops. !
Click to expand...
Click to collapse
did you wipe, sounds like a serious error in memory of wiping, when /data is not clean.
edit: i just wiped and tested, and yes, audio with calls, even with BT seems to fail at some point, i just got noise in bt headset and on my mbile answering machine so not working well.
hasbai said:
Have this rom like the sgs3 a memory leak?
Click to expand...
Click to collapse
honestly do not know wheere the mem leak is, but as this is use proprietary drivers from GNII stock firmware, lets just hope it do not
and thats where CM team believe GSIII got one

Dexter_nlb said:
did you wipe, sounds like a serious error in memory of wiping, when /data is not clean.
edit: i just wiped and tested, and yes, audio with calls, even with BT seems to fail at some point, i just got noise in bt headset and on my mbile answering machine so not working well.
honestly do not know wheere the mem leak is, but as this is use proprietary drivers from GNII stock firmware, lets just hope it do not
and thats where CM team believe GSIII got one
Click to expand...
Click to collapse
Yup I did a full wipe

[ROM][4 May 2013] CM7 for HTC Merge/Lexikon [Kernel: msm7x30 CM]

I originally released this rom on 2fastforums.com (http://2fastroms.com/showthread.php?5435-WIP-18-Dec-2012-CM7-Kernel-CM-msm7x30) and now feel it is ready for release on XDA. (Site is currently down for unknown reasons)
CM7 for HTC Merge/Lexikon
Click to expand...
Click to collapse
Code:
Features:
-100% stock CM7 from source
What works:
Almost everything
Click to expand...
Click to collapse
What doesn't work:
MMS on USC?
Jittery Compass
Click to expand...
Click to collapse
Instructions
1) Flash recovery through bootloader or fastboot
2) Boot into recovery and factory reset, also go into mounts and format system
3) Flash Rom
4) Flash GApps
Click to expand...
Click to collapse
Downloads
Recovery: http://d-h.st/users/e334/?fld_id=6766 (Either one will work, I personally prefer v5.0.2.8 Capacitive Touch)
ROM: http://d-h.st/users/e334/?fld_id=6727
GApps: https://www.box.com/s/79bpq0ywdxcf4093t926 (thanks liamf1!)
Click to expand...
Click to collapse
Source
Kernel: https://github.com/jianC/htc-kernel-msm7x30
Lexikon Device Tree: https://github.com/jianC/android_device_htc_lexikon
Lexikon Proprietary Vendor Tree: https://github.com/jianC/android_vendor_htc
Click to expand...
Click to collapse
All my changes are documented on github.
Credits: Cyberblade (CDMA fix), liamf1 (beta tester/helpful feedback) 2fast4u88, Cyanogenmod & Team, Kali-, Neopeek & Team, UnitedDev & Team, and everyone else who contributed.
Please leave any feedback about bugs/problems/glitches/etc and I will try to fix them.

Thank you ;D
Sent from my HTC Merge using Tapatalk 2

faille13 said:
Thank you ;D
Sent from my HTC Merge using Tapatalk 2
Click to expand...
Click to collapse
Nice to see you on here too

Lol yeah, I'm everywhere.
Sent from my HTC Merge using Tapatalk 2
---------- Post added at 01:34 PM ---------- Previous post was at 01:12 PM ----------
I don't get around here too often. I haven't seen a dedicated forum for my merge yet.
Sent from my HTC Merge using Tapatalk 2

GPS problem
How to fix the GPS ?
It won't turn on , I mean GPS icon is not shown in the notifications bar and it searches for the satellites forever .
I use 20130121 version of this mod and gsm mode .

Gytixas said:
How to fix the GPS ?
It won't turn on , I mean GPS icon is not shown in the notifications bar and it searches for the satellites forever .
I use 20130121 version of this mod and gsm mode .
Click to expand...
Click to collapse
Hmm.. i'll look into it.

I am so happy that new version established but i GSM doesn't work. Please fix the bug
Thanks

Mistake
sorry sorry, GSM works perfect, Just needed to reboot. Thanks a lot. but Bluetooth and GPS doesn't work either. Plz fix these bugs ! Thanks

nikoloz995 said:
I am so happy that new version established but i GSM doesn't work. Please fix the bug
Thanks
Click to expand...
Click to collapse
+1
development of the firmware is?

Thank you so much, this is the best rom for this phone (the only working cyanogen). I am happy to report that after a few weeks use it has across the board improved my phones responsiveness, battery life, and usability. However... I have one problem. I live in Alaska and have GCI as a carrier... when I alter my cdma apn info, everything works up to the point I want to change my MCC and MNC... it's defaulting to 310 and 012 respectively. When I leave those values alone it saves the apn... when I alter them, the apn entry disappears! How can I fix this? I I need it to be 311 and 370 but can't get it to save my apn.
If this never works, I don't care, I wil continue using this rom without mobile internet or mms downloads... it's just that good.

lexikonlover said:
Thank you so much, this is the best rom for this phone (the only working cyanogen). I am happy to report that after a few weeks use it has across the board improved my phones responsiveness, battery life, and usability. However... I have one problem. I live in Alaska and have GCI as a carrier... when I alter my cdma apn info, everything works up to the point I want to change my MCC and MNC... it's defaulting to 310 and 012 respectively. When I leave those values alone it saves the apn... when I alter them, the apn entry disappears! How can I fix this? I I need it to be 311 and 370 but can't get it to save my apn.
If this never works, I don't care, I wil continue using this rom without mobile internet or mms downloads... it's just that good.
Click to expand...
Click to collapse
APN backup and restore app worked for me on US Cellular (backup apn from stock install, then restore to CM7), though I had to switch to GoSMS as a messaging app for MMS to send properly (stock app would receive but not send MMS - SMS worked normally in both). I had no success manually entering the apn info - didn't seem to have any effect when I tried.
@JianC
I found an issue with the 20130121 version from Jan 21 you posted on 2fastroms: If the phone is left on the charger it will charge all the way up, then discharge all the way back to zero while still plugged in. It still displays that it is at 100%, but then abruptly drops to whatever the actual charge level is after a few minutes of use. I've tried wiping battery stats to no effect and it works properly in stock rom. This is the only bug I can't seem to work around... Any fix or suggestions for things to try would be most appreciated! Thanks again for your work on this ROM!

Fixed GPS (and other issues), please see OP!
EDIT: I'll look into the apns issue... I don't use my Merge on CDMA so it's a stab in the dark.

The final version of CM7 has been uploaded (charging bug *should* be fixed).. I will not be supporting CM7 anymore but will be working on Evervolv/CM10.1.
Thanks for your feedback and support!

jianC said:
The final version of CM7 has been uploaded (charging bug *should* be fixed).. I will not be supporting CM7 anymore but will be working on Evervolv/CM10.1.
Thanks for your feedback and support!
Click to expand...
Click to collapse
CM10.1 availible to test?

DJ_MiX said:
CM10.1 availible to test?
Click to expand...
Click to collapse
Nope, he working on kernel .
http://review.evervolv.com
Sent from my HTC Merge using xda premium

If any help with the kernel is needed I will try my best to free up some time and pitch in some help. I have made several kernels for several other devices and the most popular being for the Acer Iconia tablets here on XDA see my signature. Great to see a CM rom for the merge on here though!! GB works fine for me, not that much cool factor from cm 10 or cm 10.1 as I have compiled quiet a few nightlies for the A100.. Other than the Project Butter and the overall UI I could care less about JB/ICS.

linuxsociety said:
If any help with the kernel is needed I will try my best to free up some time and pitch in some help. I have made several kernels for several other devices and the most popular being for the Acer Iconia tablets here on XDA see my signature. Great to see a CM rom for the merge on here though!! GB works fine for me, not that much cool factor from cm 10 or cm 10.1 as I have compiled quiet a few nightlies for the A100.. Other than the Project Butter and the overall UI I could care less about JB/ICS.
Click to expand...
Click to collapse
@linuxsociety That would be awesome if you could. Elginsk8r and I have already ported the board files but I can't figure out what's keeping it from booting..
@ everyone: CM9 for the htc merge is here!: http://forum.xda-developers.com/showthread.php?p=44487058#post44487058

jianC said:
@linuxsociety That would be awesome if you could. Elginsk8r and I have already ported the board files but I can't figure out what's keeping it from booting..
Click to expand...
Click to collapse
Does it just boot loop or does it go black? does the CM logo appear? Guess there is no logcat output via adb either or you'd probably have nailed it by now. Maybe we will have to get jtag debugging output so we can see exactly what is causing the kernel panic and work from there.
I have just now had time to get on xda and check up on the new status. I will try to clone the git repository and check the kernel .config for the cm10 build. Just a thought but on most devices that have a working kernel with cm9 the exact same kernel + modules work fine with CM10. Have you all tried the kernel from CM9 that was just recently posted on any CM10 builds for the device? Not much has changed between ICS and JB that are dependent on in kernel features or that require bleeding edge mainline kernel and/or proprietary kernel patches. However there is a good possibility that the issue is more to do with the bootloader that is required to chainload the android OS for JB causing CM10 not to boot properly. So updating the bootloader may be necessary for JB/CM10 to boot properly. Nevertheless we need some debugging output in order to pinpoint what exactly is the problem going on. I am going to flash cm9 to my merge now and see how everything goes. I may experiment with the cm9 kernel and a cm10 build if I can find one for the merge. My hardware I have right now would take quiet some time to build JB as I haven't even used this old c2d laptop to build any android roms yet lol. Sorry for such a long posting but hopefully it is of some help in finding the resolution to the problems we have.
Thanks guys!

linuxsociety said:
Does it just boot loop or does it go black? does the CM logo appear? Guess there is no logcat output via adb either or you'd probably have nailed it by now. Maybe we will have to get jtag debugging output so we can see exactly what is causing the kernel panic and work from there.
I have just now had time to get on xda and check up on the new status. I will try to clone the git repository and check the kernel .config for the cm10 build. Just a thought but on most devices that have a working kernel with cm9 the exact same kernel + modules work fine with CM10. Have you all tried the kernel from CM9 that was just recently posted on any CM10 builds for the device? Not much has changed between ICS and JB that are dependent on in kernel features or that require bleeding edge mainline kernel and/or proprietary kernel patches. However there is a good possibility that the issue is more to do with the bootloader that is required to chainload the android OS for JB causing CM10 not to boot properly. So updating the bootloader may be necessary for JB/CM10 to boot properly. Nevertheless we need some debugging output in order to pinpoint what exactly is the problem going on. I am going to flash cm9 to my merge now and see how everything goes. I may experiment with the cm9 kernel and a cm10 build if I can find one for the merge. My hardware I have right now would take quiet some time to build JB as I haven't even used this old c2d laptop to build any android roms yet lol. Sorry for such a long posting but hopefully it is of some help in finding the resolution to the problems we have.
Thanks guys!
Click to expand...
Click to collapse
The .35 kernel works fine for CM10.0 but I'm having some issues booting cm10.1 with the .35 kernel because of some graphics memory allocation issues. The main issue is that there are a few issues that can't be fully fixed without the 3.0 kernel such as the camera/camcorder, ION support, etc (which is WIP here: http://review.evervolv.com/#/c/6609/ ). I have already tried probing for the UART TX/RX pins on the lexikon motherboard with a bus pirate but I have not found anything to date. I ordered a micro usb breakout board yesterday for USB UART debugging and am going to pick up some resistors from radioshack so we can hopefully get some progress on the 3.0 kernel because it won't boot far enough to adb or dmesg for our purposes. The problem isn't CM10 right now, but the kernel, which would require jtag or uart debugging, as you have mentioned. I hope that we can get the 3.0 kernel booting soon so we can have cm9/10 fully working.

jianC said:
The .35 kernel works fine for CM10.0 but I'm having some issues booting cm10.1 with the .35 kernel because of some graphics memory allocation issues. The main issue is that there are a few issues that can't be fully fixed without the 3.0 kernel such as the camera/camcorder, ION support, etc (which is WIP here: http://review.evervolv.com/#/c/6609/ ). I have already tried probing for the UART TX/RX pins on the lexikon motherboard with a bus pirate but I have not found anything to date. I ordered a micro usb breakout board yesterday for USB UART debugging and am going to pick up some resistors from radioshack so we can hopefully get some progress on the 3.0 kernel because it won't boot far enough to adb or dmesg for our purposes. The problem isn't CM10 right now, but the kernel, which would require jtag or uart debugging, as you have mentioned. I hope that we can get the 3.0 kernel booting soon so we can have cm9/10 fully working.
Click to expand...
Click to collapse
This sounds about like the exact same issues that was experienced when I was helping hashcode work on the original kindle fire device and getting it to work with ICS. I 'think' with the HTC it shouldn't be near as hard to resolve the issue to get full hw acceleration, memory mappings camera/gps and all the extra bells and whistles if we make an attempt at backporting the necessary support into the .35 kernel instead of trying to upgrade * to 3.x which will be adding to the work and break more things than it fixes. Since HTC apparently isn't going to be releasing any updates for the device it looks like it is going to be left all up to us to make one of two decisions:
1) backporting kernel - only the few things remaining needed for our current working GB kernel to have full support for ICS/JB roms
OR
2) updating to 3.x.x and merging HTC fixes and 3rd party patches -through several mainline kernel patches and keeping the proprietary htc addins compatible.
My opinion/suggestion:
I'd think of the two options that backporting would be the most logical answer to the equation since we are only missing support for few things and you already have everything working except the camera, ION, BINDER(?), and other >=3.0.0 android patches. Plus the device is pretty well coming to a good place to say cease development work and either enjoy the device or upgrade to something newer. So if we could get JB support or even just ICS working fully I think 99.99% of all owners/users would be more than 99.99% happy!! I know I would be very happy myself!

[Q] YouTube app doesn't work anymore after CM9 update

I recently flashed the CM9 20130227 to update my old version of CM9 that was about a year old. But after I flashed it I couldn't play any videos. Either from YouTube app or the phone's player or any player. Videos just won't play. I did a re-install and tried to go back to my old ROM but the problem's still there.
Everything was working before I flashed the update. Any video playback gives me an error message "Sorry, this video cannot be played."

flash proton kernel

No dont flash the proton kernel. Flash hefe. Or the rom from aug 30th. Cm9 last one released in 2012. Proton kernel is what broke video
Sent from my SGH-T959V using Tapatalk 2

turtlepa said:
No dont flash the proton kernel. Flash hefe. Or the rom from aug 30th. Cm9 last one released in 2012. Proton kernel is what broke video
Sent from my SGH-T959V using Tapatalk 2
Click to expand...
Click to collapse
Uh, no. Proton Kernel fixes it. Unless lumin30, Volkronica, AnAznBoy9724, FBis251, and hittzman are all lying...

Theraze said:
Uh, no. Proton Kernel fixes it. Unless lumin30, Volkronica, AnAznBoy9724, FBis251, and hittzman are all lying...
Click to expand...
Click to collapse
Flashing CM 9.1 and then flashing the Proton Kernel fixes the YouTube problem.

You Tube worked great for me with the hefe kernal.

Yeah... just about any non-CM9.1-release kernel works great. I was merely pointing out that turtlepa saying that the Proton kernel was the problem, was totally off base and wrong.

Theraze said:
Yeah... just about any non-CM9.1-release kernel works great. I was merely pointing out that turtlepa saying that the Proton kernel was the problem, was totally off base and wrong.
Click to expand...
Click to collapse
Agreed!

Proton has screwd video for me tho. And poop/proton comes with ultragen flash hefe on top it fixes blacklights. Interesting. Proton never deep slept for me
Sent from my SGH-T959V using Tapatalk 2
---------- Post added at 03:08 PM ---------- Previous post was at 03:07 PM ----------
Theraze u even stated yourself to someones question how to fix youtube and video recording. Ask in qa or flash another kernel. 9.1 comes with proton so.. another kernel must mean hefe
Sent from my SGH-T959V using Tapatalk 2

I run Ultragen 1.01, and the proton kernel, both in my sig and youtube, recorded video in 720p plays back fine, netflix works fine, everything works great. Youtube was borked in ultragen 1.0 as well as some video, so make sure to get 1.01, reboot, let it sit, flash proton, video in full smoothness. If it doesn't, its your phone.

turtlepa said:
Theraze u even stated yourself to someones question how to fix youtube and video recording. Ask in qa or flash another kernel. 9.1 comes with proton so.. another kernel must mean hefe
Click to expand...
Click to collapse
Uh... no. The flashable Proton/Poop kernels come from Erik. CM9.1 came from Brian.
The flashable Proton/Poop kernels work with Youtube/Video/stuff. The CM9.1 version does not.
These are differences. That means that they're not the same.
While it's sad that your personal experience doesn't match the rest of the world, that doesn't invalidate the rest of reality.

getochkn said:
I run Ultragen 1.01, and the proton kernel, both in my sig and youtube, recorded video in 720p plays back fine, netflix works fine, everything works great. Youtube was borked in ultragen 1.0 as well as some video, so make sure to get 1.01, reboot, let it sit, flash proton, video in full smoothness. If it doesn't, its your phone.
Click to expand...
Click to collapse
Is that maybe a user thing? cause i actually just flashed in cm9.1 then up to ultragen 1.01 like 2 days ago and i have no problem at all with youtube, loads up and plays videos just fine unless theres something wrong im not seeing

The problem noted in this thread is specific to the CM9.1.0 build from Feb 27, 2013. The version of the kernel included with that had some major issues, fixed by flashing... anything that's not that specific kernel version.
Ultragen 1.0 had some issues as well, but if you flashed 1.01 instead (or over it), those original Ultragen issues should be solved.

OR, Maybe Aries

Well, if they're grabbing one of the publicly available CM9 versions with Aries+SOD, extracting the boot.img file and flashing it over to their phone... Youtube not playing is the least of concerns.
And if they're compiling their own post-noiphone-SOD-fixed kernels, they probably have better things to do than complain here, like go onto the IRC channel and discuss with other developers how to actually fix it.

[Q] SlimKat ROM 7.2.1 and 7.4 do not recognize Xiaomi Piston 2 headphones

Hello SlimKat support,
I had an issue with Xiaomi Piston 2 headphones on the SlimKat ROM 7.2.1... OnePlus One recognize inserting it only one time of 10 inserting...
But with SlimKat ROM 7.4 headphones is not recognized at all I tried 20time insert jack, but OnePlus One did not recognize insertion any of try.
It was OK on the SlimKat ROM 7.0 (stable)...
It is an issue only with Xiaomi Piston 2 headphones... I just tried two other headphones I have at home and OnePlus One recognize them on 1st insertion :good:
Does somebody else have this issue with Piston 2 headphones? Thank you.

Works perfectly with 11s. Maybe they switched the key assignment.
Sent from my A0001 using XDA Free mobile app

reinstall or not reinstall... thats whats going on here...
Hi tssphysicsboi,
hm, that I was worried about...
I like SlimKat as light weigh ROM... so reinstall all apps and configure whole mobile again... uff
I would rather have fix for SlimKat then to give up on it :highfive:

Read more here http://forum.xda-developers.com/one...-kernel-r1-t2800871/post54826109#post54826109
Workaround included. The problem involves CM commits related to audio within the kernel. All ROMs/kernels update their commits on top of what CM already offers so therefore other ROMs/kernels will have this problem.
Short story:
Workaround: Slowly plug the jack half way in.... hear the music start outputting via headset (you have to have auto detect on insertion enabled) but and then a few seconds later I insert the jack fully in and then it works.
Click to expand...
Click to collapse
Can't really do much, use a older custom kernel if you want the phone to detect or do the workaround and be patient while CM works on it.
I use the Pistons myself, great headphones. Best $25 spent

When I use this reduction - http://shop.recall.cz/?cls=stoitem&stiid=7109 and headphones are functioning properly. Certainly there is an error in the rom? Or has oneplus involved as jack iphone?

unavix said:
When I use this reduction - http://shop.recall.cz/?cls=stoitem&stiid=7109 and headphones are functioning properly. Certainly there is an error in the rom? Or has oneplus involved as jack iphone?
Click to expand...
Click to collapse
Yeah a audio splitter works. Its a problem within the kernel related to CM commits. Its being looked into.

...
unavix said:
When I use this reduction - ... and headphones are functioning properly. Certainly there is an error in the rom? Or has oneplus involved as jack iphone?
Click to expand...
Click to collapse
Definitely issue with SlimKat ROM, because it works in other ROMs.
And the reduction means the ROM doesn't cooperate with the "extra" connectors on the jack.
zephiK said:
Yeah a audio splitter works. Its a problem within the kernel related to CM commits. Its being looked into.
Click to expand...
Click to collapse
Great news. Thank you.

djha53k said:
Definitely issue with SlimKat ROM, because it works in other ROMs.
And the reduction means the ROM doesn't cooperate with the "extra" connectors on the jack.
Great news. Thank you.
Click to expand...
Click to collapse
The problem is resolved now. Download a kernel with the newest commits, Franco r14 contains this new commit so its fixed.

zephiK said:
The problem is resolved now. Download a kernel with the newest commits, Franco r14 contains this new commit so its fixed.
Click to expand...
Click to collapse
what kernel? uff, where? How to install it?
I'm sorry, the One is my first Android mobile and I was so so happy I was able to replace CM11s with SlimKat... playing even with kernel... uff
Is there any step by step guide how to replace kernel on SlimKat?
edit: I think... I will rather wait for next build and install it as whole ROM update... then trying to hacking kernel...

djha53k said:
what kernel? uff, where? How to install it?
I'm sorry, the One is my first Android mobile and I was so so happy I was able to replace CM11s with SlimKat... playing even with kernel... uff
Is there any step by step guide how to replace kernel on SlimKat?
Click to expand...
Click to collapse
Its in original android dev franco kernel... download the zip r14 -> put it on your phone -> reboot to recovery mode -> flash it in TWRP and then reboot.
its very easy to do.... be sure to download the AOSP kernel variant since ur on SlimKat.

zephiK said:
Its in original android dev franco kernel... download the zip r14 -> put it on your phone -> reboot to recovery mode -> flash it in TWRP and then reboot.
its very easy to do.... be sure to download the AOSP kernel variant since ur on SlimKat.
Click to expand...
Click to collapse
OK, looks easy...
Where can I get that zip?
I tried search in the OnePlus One section of Kernels, but I got only "No results were found."
Thank you.
------
edit: OK, I found the franco.Kernel-nightly-r14.zip, but it seem to me it is only for CM11s (maybe for CM11 as well), but there is nothing said about SlimKat ROM... can I install then? Or I will brick my One? Thank you.

djha53k said:
OK, looks easy...
Where can I get that zip?
I tried search in the OnePlus One section of Kernels, but I got only "No results were found."
Thank you.
Click to expand...
Click to collapse
OnePlus One -> Original Development -> Franco Kernel r14.

zephiK said:
OnePlus One -> Original Development -> Franco Kernel r14.
Click to expand...
Click to collapse
Got it: http://forum.xda-developers.com/oneplus-one/orig-development/kernel-franco-kernel-r1-t2800871
Thank you very much :good: