[Q] PC Won't Detect my Transformer on Megatron ROM - Eee Pad Transformer Q&A, Help & Troubleshooting

I recently installed Megatron ROM on my Transformer and when I plugged my device to my PC, my transformer is not recognized by my PC. Am I missing anything or is this normal? Thanks in advance!

joselopez23 said:
I recently installed Megatron ROM on my Transformer and when I plugged my device to my PC, my transformer is not recognized by my PC. Am I missing anything or is this normal? Thanks in advance!
Click to expand...
Click to collapse
Nothing to be worried about
You have and awesome ROM, the problem is the Kernel.
So all you need to do is to install guevor's kernel 17 for instance (it is the one I have working fine til now) and you're pc would reconigze the transformer!

still not detected
Thanks for the response..
But sadly I am already using 17c, but my pc still can't see my device..

joselopez23 said:
Thanks for the response..
But sadly I am already using 17c, but my pc still can't see my device..
Click to expand...
Click to collapse
Now I don't know how to help you. Try to put your question in megatron's thread. It's most likely that you get more answers

Iam not even able to boot with 17c. I found 16 megatron specific kernel most stable (17 works too). Try the 16 megatron specific kernel

I would have posted in megatron thread if only I could. My account is still new and I still can't post in dev...
Tried 16 still no luck.. tried reflashing the rom still no luck. Hope someone here has the answer to my problem..

joselopez23 said:
I would have posted in megatron thread if only I could. My account is still new and I still can't post in dev...
Tried 16 still no luck.. tried reflashing the rom still no luck. Hope someone here has the answer to my problem..
Click to expand...
Click to collapse
Try playing around with MTP
Settings>Storage>Hit the 3 dots at the top right corner>USB computer connection>Make sure MTP is checked, if it is, uncheck and check it again.
you might also have to install driver again.

baseballfanz said:
Try playing around with MTP
Settings>Storage>Hit the 3 dots at the top right corner>USB computer connection>Make sure MTP is checked, if it is, uncheck and check it again.
you might also have to install driver again.
Click to expand...
Click to collapse
Or try Universal Naked Drivers, worked just fine with me

I will try your suggestions. I'll keep youbguys posted. Thanks!

Tried to tick and untick the mtp option but still my transformer is not being recognized by my pc.. sigh.. might as well try another rom or go back to stock..

I am having the exact same problem. I just switched from the stock kernel to the guevor 16 kernel and now my PC recognizes the transformer but it says that the ASUS Android Composite ADB Interface failed to install.
Eclipse says that ADB is running normally but it doesn't show any devices in the android device chooser.
Anything I should try?

Related

[Q] vipermod Guide?

Ive got one more question. Ive been looking in the internet for a few hours, but i didnt find what i wanted to find. How do i exactly root with vipermod?
I was only able to find Guides for the prime, but I read somewhere that its for both tf201 and 101. Can someone please post a ink to a guide , a guide or something like that? Would be the coolest ;D because i really need root. XD
boot in adb mode run viper choose choice 1 ...Profit
transformador said:
Ive got one more question. Ive been looking in the internet for a few hours, but i didnt find what i wanted to find. How do i exactly root with vipermod?
I was only able to find Guides for the prime, but I read somewhere that its for both tf201 and 101. Can someone please post a ink to a guide , a guide or something like that? Would be the coolest ;D because i really need root. XD
Click to expand...
Click to collapse
First of all, if you are in ICS, all you need to do is download the vipermod tool from
http://forum.xda-developers.com/showthread.php?p=21009605
You should connect you tf101 and make sure under settings you have usb debugging checked. On your computer run the tool, click option 1 (even if it says tf201), just wait for it to reboot and confirm you have superuser and root. Hope this helps.
If you are still in honeycomb, i think there is another option for Tf101 in vipermod
im still hc user because of in austria and germany ota upgrade comes on1st march ...
how do i boot into adb? im a complete noob
transformador said:
how do i boot into adb? im a complete noob
Click to expand...
Click to collapse
You DON'T boot into ADB (no such thing)
Just turn USB debugging ON.
Connect TF to PC via USB and run ViperMod (choose option 1)
THANKS
thanx for your great support it worked now im rooted
does not work fpr me keep getting protocol error
I'm hoping this will also work with the SL101 when they finally release ICS for it.
Sent from my Slider SL101 using Tapatalk
Canadoc said:
does not work fpr me keep getting protocol error
Click to expand...
Click to collapse
ICS is option 1
HC is option 3
Also make sure USB debugging is on AND your drivers are installed too.

Go back to stock rom

How can I go back to stock rom?
I have now CWM recovery and razodroid 4
I tried with odin, but my phone is not recognized
What can I do?
Was your phone on downloading mode?
Sent from my GT-S5670 using xda premium
yes. In download mode. Do i have to do something before trying to install stock rom?
Did you selected the packages (the opd etc) ?
Sent from my GT-S5670 using xda premium
Yes, of course. The problem is with recognition of device. No device is found connected and i am in download mode..
srady89 said:
Yes, of course. The problem is with recognition of device. No device is found connected and i am in download mode..
Click to expand...
Click to collapse
Have you installed Samsung USB Drivers?
EDIT: Anyway check this link http://yagyagaire.blogspot.in/2012/01/how-to-flash-official-stock-firmwares.html#.T9tJmBfzvIc and see if you missed any step.
echo104 said:
Have you installed Samsung USB Drivers?
EDIT: Anyway check this link http://yagyagaire.blogspot.in/2012/01/how-to-flash-official-stock-firmwares.html#.T9tJmBfzvIc and see if you missed any step.
Click to expand...
Click to collapse
^ +1 for the post !
Make sure u use the right version of ODIN !
same issue...
dhananjaipai said:
^ +1 for the post !
Make sure u use the right version of ODIN !
Click to expand...
Click to collapse
Im having the same issue. My cel is a Galaxy Fit GT S5670L notice that the L is for latin america. i previously bricked another same phone because i didn't read the warning about using ROM MANAGER on this phone... but back to my issue i bought another one cheap and lightly used. so i decided to install a custom rom from here. First i updated the 2.2 Froyo to 2.3.6 Gingerbread with ODIN, everything fine till there. Then installed the clockwork recovery 5 with ODIN too, and finally the ROM wich i decided to install the Cyanogenmod-7.2-Stable-GBSV4XDA-FVT, pretty cool rom BTW. Everything is working PERFECT with the rom EXCEPT that it is not working with my provider... the first hours after the installation was working perfect the after a few hours everybody was saying that they called me and just voicemail no ring at all... i looked at my phone and the signal was OK, Provider name and everything good but nothing. Then i tried this switched to Plane Mode On and Off to disconnect any connection and worked for a few minutes and the problem started again...
So i decided to try another ROM i decided for the Cyanogenmod_avibidz_v1.0 and like the last ROM everything worked fine for a few hours and the same issue again exactly the same.
So i got sick of it so i decided to switch back the stock ROM that thank god i found on the web but now the BIG ISSUE,,, i CONNECT the phone to the PC and says USB DEVICE NOT RECOGNIZED... so i was like WTF!!
I hope you experts could help me find the issue plz i miss my phone... Thanks in advance
joelosr20 said:
Im having the same issue. My cel is a Galaxy Fit GT S5670L notice that the L is for latin america. i previously bricked another same phone because i didn't read the warning about using ROM MANAGER on this phone... but back to my issue i bought another one cheap and lightly used. so i decided to install a custom rom from here. First i updated the 2.2 Froyo to 2.3.6 Gingerbread with ODIN, everything fine till there. Then installed the clockwork recovery 5 with ODIN too, and finally the ROM wich i decided to install the Cyanogenmod-7.2-Stable-GBSV4XDA-FVT, pretty cool rom BTW. Everything is working PERFECT with the rom EXCEPT that it is not working with my provider... the first hours after the installation was working perfect the after a few hours everybody was saying that they called me and just voicemail no ring at all... i looked at my phone and the signal was OK, Provider name and everything good but nothing. Then i tried this switched to Plane Mode On and Off to disconnect any connection and worked for a few minutes and the problem started again...
So i decided to try another ROM i decided for the Cyanogenmod_avibidz_v1.0 and like the last ROM everything worked fine for a few hours and the same issue again exactly the same.
So i got sick of it so i decided to switch back the stock ROM that thank god i found on the web but now the BIG ISSUE,,, i CONNECT the phone to the PC and says USB DEVICE NOT RECOGNIZED... so i was like WTF!!
I hope you experts could help me find the issue plz i miss my phone... Thanks in advance
Click to expand...
Click to collapse
Try it in another computer, select the correct .ops and remember, you need flash a european or asian old froyo with the 4 packages (Not integrated package)
plasticos2011 said:
Try it in another computer, select the correct .ops and remember, you need flash a european or asian old froyo with the 4 packages (Not integrated package)
Click to expand...
Click to collapse
I know all of that... I've tried 2 different computers, 3 different Odin versions and the opaque included in packages... the thing is that Odin don't recognize my phone... I have Samsung USB drivers also Samsung kies and nothing...
Download stock ROM from here.
http://www.sammobile.com/firmware/
Download Beni v.1.0.ops
Download Odin Multidownloader 4.38
Run it as Administrator.
Shotdown mobile, press buttons Home, Up and Power. Wait a little while to appear yellow triangle. Connect the cable to the USB on the PC. In the Odin click on Start and wait until it is all over.
already done in 2 diff laptops one XP and one windows 7... nothing only the bubble notification that says USB device not recognized aldo tried the administrator thing and is the same...
joelosr20 said:
already done in 2 diff laptops one XP and one windows 7... nothing only the bubble notification that says USB device not recognized aldo tried the administrator thing and is the same...
Click to expand...
Click to collapse
Download and install driver for USB.
ZmisiS said:
Download and install driver for USB.
Click to expand...
Click to collapse
i have tried the drivers package downloaded from somewhere in this page and also tried installing kies.... and nothing...
joelosr20 said:
i have tried the drivers package downloaded from somewhere in this page and also tried installing kies.... and nothing...
Click to expand...
Click to collapse
You need install stock ROM for Kies. How instaliratoi stock ROM I have explained before in one of his commentary. Only after you installed the stock ROM, then you can connect Kies with the phone.
ZmisiS said:
You need install stock ROM for Kies. How instaliratoi stock ROM I have explained before in one of his commentary. Only after you installed the stock ROM, then you can connect Kies with the phone.
Click to expand...
Click to collapse
OK i finally installed the stock ROM now its working at 100% aparently will try it for the next couple of days to see if anything fails. But damn this means that theres no Custom ROM i can install on my phone that doesnt give me any problems with my provider.
Does anybody can explain me why this happens?? is there any config or something that the ROM can be modified to make it work with my provider?? Because the STOCK ROM really sucks!!
Thanks in advance experts!
joelosr20 said:
OK i finally installed the stock ROM now its working at 100% aparently will try it for the next couple of days to see if anything fails. But damn this means that theres no Custom ROM i can install on my phone that doesnt give me any problems with my provider.
Does anybody can explain me why this happens?? is there any config or something that the ROM can be modified to make it work with my provider?? Because the STOCK ROM really sucks!!
Thanks in advance experts!
Click to expand...
Click to collapse
I do not have a problem with their provider. For me doing all the custom ROMs that I installed.
ZmisiS said:
I do not have a problem with their provider. For me doing all the custom ROMs that I installed.
Click to expand...
Click to collapse
i can assume u live in US not Latin America...???
Problem solved, aparently the problem was my company not the rom or cellphone. I installed the stock rom used it for a few days working gradually from 75% till os fully working so i decided to install the custom rom again. And by now is fully working :beer:
Sent from my GT-S5670 using xda premium
joelosr20 said:
Problem solved, aparently the problem was my company not the rom or cellphone. I installed the stock rom used it for a few days working gradually from 75% till os fully working so i decided to install the custom rom again. And by now is fully working :beer:
Sent from my GT-S5670 using xda premium
Click to expand...
Click to collapse
That's what I assumed. It is important that the problem is resolved.

ASUS TF700T unlock and root JB 4.2.1 stock

FOR ANYONE THAT EITHER JUST BOUGHT THE TF700 OR UPGRADED OTA TO 4.2.1 JB AND WANTS TO UNLOCK AND/OR ROOT THE DEVICE
LINKS WILL BE AVAILABLE.
WARNING: UNLOCKING THE DEVICE WILL VOID YOUR WARRANTY WITH ASUS, I DONT KNOW IF IT WILL VOID IT WITH SQUARETRADE OR OTHER WARRANTIES. ALSO, I AM NOT RESPONSIBLE FOR ANY DAMAGES TO ANY TABLET, EVEN THOUGH I HAD NO TROUBLE OR PROBLEMS WHATSOEVER.
(ROOTING IS REVERSIBLE AND DOES NOT VOID WARRANTY)
TO UNLOCK
TO UNLOCK THE DEVICE, GO AND USE THE ASUS UNLOCK TOOL FROM THEIR WEBSITE.
CLICK THE LINK PROVIDED
CHOOSE OS: ANDROID
UNDER "UTILITES" THE SECOND SAYS VERSION 7 ASUS UNLOCK TOOL (YES I'M AWARE IT SAYS FOR ICS ONLY BUT I HAVE TRIED IT AND IT WORKS WITH JB 4.2.1)
DOWNLOAD IT EITHER FROM THE TABLET ITSELF OR LOAD IT TO AN SD CARD.
IT IS AN APK FILE SO IT WILL INSTALL AS AN APP.
RUN IT, AND *SCROLL DOWN TO THE END* ON THE TERMS AND CONDITIONS, AND AGREE TO IT. THE TABLET WILL REBOOT AND ON THE TOP LEFT CORNER IT WILL SAY "UNLOCKING DEVICE" GIVE IT 5 MINS DONT FREAK OUT. ONCE DONE, IT WILL SAY "DEVICE UNLOCKED" AND THERE YOU GO. YOU'RE OFFICIALLY UNLOCKED!!
If you are going to install custom ROMS, after unlocking and rooting, you need to install TWRP. I suggest to install GOOMANAGER from the playstore and doin it from there. Just click on the right corner and choose install openrecovery script and choosing twrp.
LINK TO ASUS WEBSITE: http://support.asus.com/download.as...Infinity+TF700T&os=&hashedid=fq2B3oq64av1O95u
_________________________________________________________________________________________________________________
TO JUST ROOT YOUR DEVICE
TO ROOT YOUR DEVICE ON 4.2.1 JB
FIRST PREPARE YOUR TABLET,
GO TO SETTING, UNDER SYSTEM CLICK ON "DEVELOPER OPTIONS" AND MAKE SURE YOU HAVE CHECKED THE "USB DEBUGGING"
IF YOU DONT HAVE A"DEVELOPER OPTIONS" CLICK ON "ABOUT TABLET" AND WHERE IT SAYS "BUILD NUMBER" CLICK ON IT UNTIL IT SAYS " CONGRATULATIONS NOW YOU ARE A DEVELOPER" IT SHOULD BE AROUND 5-10 TIMES, AFTER THAT YOU SHOULD BE ABLE TO SEE THE "DEVELOPER OPTIONS ON THE LEFT" RIGHT ABOVE "ABOUT TABLET" (THEN ENABLE USB DEBUGGING"
NEXT, UNDER "PERSONAL" CLICK THE TAB THAT SAYS "SECURITY" AND ENABLE "UNKNOWN SOURCES"
ONCE DONE WITH THIS, CONNECT YOUR TABLET TO YOUR LAPTOP/PC
DOWNLOAD MOTOCHOPPER FROM THE LINK PROVIED
EXTRACT IT AND RUN THE FILE THAT SAYS "RUN"
ONCE YOU RUN IT JUST FOLLOW THE SIMPLE STEPS ON THE SCREEN
IF ALL GOES WELL, YOUR DEVICE SHOULD BE ROOTED AND YOU SHOULD HAVE SUPERSU INSTALLED
EDIT!: IF YOU UPGRADED OR YOUR TABLET CAME WITH BUILD NUMBER 10.6.1.14.10, MOTOCHOPPER WONT WORK TO ROOT. YOU WILL NEED TO DOWNGRADE TO 10.6.1.14.08 AND THEN ROOT WILL BE AVAILABLE
LINKS FOR MOTOCHOPPER:
http://www.mediafire.com/?f4lipgd1hh3jug2
(I ATTACHED THE LINK TO THIS FORUM AS WELL JUST IN CASE)
PLEASE ASK ANY AND ALL QUESTIONS I WILL BE GLADLY TO ANSWER THEM TO THE BEST OF MY KNOWLEDGE, IF NOT I WILL HELP YOU FIND THE ANSWER.
ALSO, I WOULD LIKE TO THANK ALL XDA FORUM MEMBERS AND DEV AND MODERATORS FOR HELPING ME LEARN.
SPECIAL THANKS TO
Tylorw1 said:
tylor
Click to expand...
Click to collapse
FOR GUIDING ME IN TIME OF NEED
inky2020 said:
inky
Click to expand...
Click to collapse
FOR HELPING
buhohitr said:
buhohitr
Click to expand...
Click to collapse
FOR HELPING FINDING OUT IT WORKS
Morlok8k said:
morlok8k
Click to expand...
Click to collapse
FOR PROVIDING DOWNLOAD LINKS TO MOTOCHOPPER
rickymh19 said:
YES I'M AWARE IT SAYS FOR ICS ONLY BUT I HAVE TRIED IT AND IT WORKS WITH JB 4.2.1
Click to expand...
Click to collapse
Unlock tool confirmed working on JB 4.2.1 - just unlocked the bootloader on my totally stock TF700T JB 4.2.1 (WW). Now to flash CROMI-X! :victory:
Stupid easy (locked-root)
Enable USB debugging.
Plug in TF700T.
Windows 7 loaded all of the drivers.
D/L the file.
Extract.
Double click run.bat.
Answer a couple of questions.
Root in under a minute.
:laugh::victory:
Thanks for the motochopper link. Worked perfect on my 4.2.1 tf700, could not have been easier.
Runs a whole lot better with all the bloat frozen and memory cache tweaks.
Thanks you for this. Noon here and will try your tutorial soon
Wont Root
Hey Haven't dont any rooting on the TF700 yet, so bear with me.
Did a 4.2 OTA update (stock)
Unlocked it,
Used Motochopper
But stuck on
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
Help?
Thanks in Advance!
Gave you a thanks for the post.
darkskoliro said:
Hey Haven't dont any rooting on the TF700 yet, so bear with me.
Did a 4.2 OTA update (stock)
Unlocked it,
Used Motochopper
But stuck on
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
Help?
Thanks in Advance!
Click to expand...
Click to collapse
when you're running motochopper, you get that message?
if so, make sure you have "usb debugging" enabled under setting>developer options.
also, try reinstalling the drivers for the tf700
connect it via usb, before running motochopper, on the folder of motochopper there is
a file that says "adb" run that before running the "run" file.
usually that message is for a bad driver or because adb isnt reading your tablet.
hope that helps keep me updated.
rickymh19 said:
when you're running motochopper, you get that message?
if so, make sure you have "usb debugging" enabled under setting>developer options.
also, try reinstalling the drivers for the tf700
connect it via usb, before running motochopper, on the folder of motochopper there is
a file that says "adb" run that before running the "run" file.
usually that message is for a bad driver or because adb isnt reading your tablet.
hope that helps keep me updated.
Click to expand...
Click to collapse
Hey thanks for the reply, but still nothing! :*(
I have done everything but install new drivers. (My drivers are working properly)
But is there a chance there are 4.2 drivers? Which might be the problem? Not sure..
darkskoliro said:
Hey thanks for the reply, but still nothing! :*(
I have done everything but install new drivers. (My drivers are working properly)
But is there a chance there are 4.2 drivers? Which might be the problem? Not sure..
Click to expand...
Click to collapse
Hmm...I would suggest deleting the drivers, and downloading the drivers from the Asus website. And then make sure your ADB can find your tablet. Run the adb file first and then the run file. You should have no problem. Try cold booting your device as well and make make sure you have usb debugging checked.
If this fails, the most probable solution would be going to another thread and downloading the debugfs tool for tf700. I'm not at my computer now so I can't give you the direct link. But if you search for it you'll find it. I did a while back.
Keep me updated.
That is the quickest and easiest root I've ever done on a device! Thanks for keeping it simple :good::good:
HI -
I followed the instructions on this thread and was ulocked/rooted in less than five minutes - installed TWRP - made a nandroid backup - then did something I am afraid was incredibly stupid. I was going to do a wipe per instructions before installing a ROM and I selected "Advanced" and wiped everything instead of just doing a factory wipe.
Now when powered on it is stuck at the ASUS initial screen.
Hoping this can be fixed - can anyone help me out.
Thanks!
Ted
tgatlinjr said:
HI -
I followed the instructions on this thread and was ulocked/rooted in less than five minutes - installed TWRP - made a nandroid backup - then did something I am afraid was incredibly stupid. I was going to do a wipe per instructions before installing a ROM and I selected "Advanced" and wiped everything instead of just doing a factory wipe.
Now when powered on it is stuck at the ASUS initial screen.
Hoping this can be fixed - can anyone help me out.
Thanks!
Ted
Click to expand...
Click to collapse
If you had a rom downloaded, you wiped it
Download the rom you want to flash to a microSD, insert it into your tablet, reboot into TWRP, select the microSD and install the zip.
Make sure you have a compatible recovery and rom combination.
What's your recovery version and what rom do you want to flash?
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
Thanks for this. Initially, I was stuck on adb not finding the device - I killed the batch file and then ran
Code:
adb devices
and sure enough, nothing there.
I had to manually uninstall the drivers and then let Windows find them again - this time there was an unknown device, and then Windows found the MTP device and loaded it.
Then it took all of 27 seconds from start to finish lol.
Thanks again - Now I owe Djrbliss yet another contribution....
berndblb said:
If you had a rom downloaded, you wiped it
Download the rom you want to flash to a microSD, insert it into your tablet, reboot into TWRP, select the microSD and install the zip.
Make sure you have a compatible recovery and rom combination.
What's your recovery version and what rom do you want to flash?
Sent from my ASUS Transformer Pad TF700T using Tapatalk 2
Click to expand...
Click to collapse
tgatlinjr said:
HI -
I followed the instructions on this thread and was ulocked/rooted in less than five minutes - installed TWRP - made a nandroid backup - then did something I am afraid was incredibly stupid. I was going to do a wipe per instructions before installing a ROM and I selected "Advanced" and wiped everything instead of just doing a factory wipe.
Now when powered on it is stuck at the ASUS initial screen.
Hoping this can be fixed - can anyone help me out.
Thanks!
Ted
Click to expand...
Click to collapse
hey, sorry i took so long to reply, but like bern said, you're in no trouble. just do what he said and you should be fine.
just download the ROM you want or the stock rom of asus (which i wouldnt install. try cromix or parandroid or black bean theyre very good.)
put it on an sd card and boot to recovery. then the twrp should pop up, and install the rom.
if you need help on choosing the options let me know when you'll do it and ill be glad to guide you.
Thanks Everyone!
rickymh19 said:
hey, sorry i took so long to reply, but like bern said, you're in no trouble. just do what he said and you should be fine.
just download the ROM you want or the stock rom of asus (which i wouldnt install. try cromix or parandroid or black bean theyre very good.)
put it on an sd card and boot to recovery. then the twrp should pop up, and install the rom.
if you need help on choosing the options let me know when you'll do it and ill be glad to guide you.
Click to expand...
Click to collapse
Thanks for the replies?
I got every thing up and going again.
Ted
tgatlinjr said:
Thanks for the replies?
I got every thing up and going again.
Ted
Click to expand...
Click to collapse
good to hear.
Bee Waiting
I've been waiting for this..worked with my eyes closed. TF700T Locked and Rooted!!!
This worked great. Finally decided to root my tf700. I appreciate this thread so much.
Sent from my SCH-I605 using xda app-developers app
Awesome, super easy thanks!
Sent from my GT-N7000 using xda premium

[Problem]Root TF300t 4.2.1 (build:10.6.1.15.3-20130416)

Hi
my tablet has been rooted before but after updating I lost it.
i see attracting post here, and use it but it dosen't work for me and no one can solve my problem on that post.
you can see my result an print screen of ROOTCHECKER in this method at these single posts
1
2
3
please give me advise to solve this issue (and please write noob-friendly:cyclops
thanks
behnamha91 said:
Hi
my tablet has been rooted before but after updating I lost it.
i see attracting post here, and use it but it dosen't work for me and no one can solve my problem on that post.
you can see my result an print screen of ROOTCHECKER in this method at these single posts
1
2
3
please give me advise to solve this issue (and please write noob-friendly:cyclops
thanks
Click to expand...
Click to collapse
motochopper does work. What is it about it that you can't get working? Do you have the correct PC drivers?
sbdags said:
motochopper does work. What is it about it that you can't get working? Do you have the correct PC drivers?
Click to expand...
Click to collapse
I think yes, because when i use "adb devices" it find my tablet. Am I right ?
behnamha91 said:
I think yes, because when i use "adb devices" it find my tablet. Am I right ?
Click to expand...
Click to collapse
I had the same problem with my tablet. I was on 4.1 and updated to 4.2 the bootloader was still unlocked but root was gone when 4.2 loaded. The developer options turns off when you update the OS so you have to go back into the settings, hit about tablet, then go down to the build number and tap it 7 (seven) times. Developer options will then become available. Go into them and make sure that the options you need for rooting are enabled, i.e. USB debugging. Then run motochopper and root will be available again.
This info is posted elsewhere on the forum but as this topic is not closed I figured it would be good to make sure it was posted here too.
NightShade00013 said:
I had the same problem with my tablet. I was on 4.1 and updated to 4.2 the bootloader was still unlocked but root was gone when 4.2 loaded. The developer options turns off when you update the OS so you have to go back into the settings, hit about tablet, then go down to the build number and tap it 7 (seven) times. Developer options will then become available. Go into them and make sure that the options you need for rooting are enabled, i.e. USB debugging. Then run motochopper and root will be available again.
This info is posted elsewhere on the forum but as this topic is not closed I figured it would be good to make sure it was posted here too.
Click to expand...
Click to collapse
I know this ! AND USB debugging is on ! Anyway thanks for answer
and problem remain . . .
behnamha91 said:
I know this ! AND USB debugging is on ! Anyway thanks for answer
and problem remain . . .
Click to expand...
Click to collapse
Same issue here. Had it rooted under 4.1.2 updated to 4.2.1 and now the chopper can't root it. Pushes the SU app, but failed when it try to root.
Kage_
I'll just bump this to say I have the same issue. EVERY root method I've tried does not work. Motochopper, trying to flash a custom recovery. Nothing....
See this post. Assuming you are bootloader unlocked and on 4.2.1 this will work. It worked on my TF300T with an unlocked bootloader and 4.2.1 firmware. I even ran it *before* I got TWRP back on the device. BTW, make sure you use TWRP 2.5.0.0. 2.6.x.x doesn't recognize the boot partition on the 4.2 firmware. This is documented elsewhere in the Transformer forums here on XDA.
What about the newer method mentioned in the later parts of the motochopper thread?
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
funnel71 said:
What about the newer method mentioned in the later parts of the motochopper thread?
Sent from my ASUS Transformer Pad TF300T using Tapatalk 2
Click to expand...
Click to collapse
I didn't try Vroot because it wasn't in English, despite the excellent post explaining it. I wasn't able to get Motochopper or the other method discussed to work.
Dumped down the innertubes from my Asus Transformer TF300T
hgoldner said:
See this post. Assuming you are bootloader unlocked and on 4.2.1 this will work. It worked on my TF300T with an unlocked bootloader and 4.2.1 firmware. I even ran it *before* I got TWRP back on the device. BTW, make sure you use TWRP 2.5.0.0. 2.6.x.x doesn't recognize the boot partition on the 4.2 firmware. This is documented elsewhere in the Transformer forums here on XDA.
Click to expand...
Click to collapse
I gave it a shot, to no avail. My bootloader is unlocked. I'm not sure what's going on here. When I opened up the program it says no device connected, though my Transformer is connected. Asus Sync also says it's not connected. But when I check my computer drives, "Asus Transformer Pad TF300T shows up... but it's not listed in my usb connections. I'm able to transfer files to and from the tablet. Man, I've never had such a tough time rooting an Android device.
iamtherizzle said:
I gave it a shot, to no avail. My bootloader is unlocked. I'm not sure what's going on here. When I opened up the program it says no device connected, though my Transformer is connected. Asus Sync also says it's not connected. But when I check my computer drives, "Asus Transformer Pad TF300T shows up... but it's not listed in my usb connections. I'm able to transfer files to and from the tablet. Man, I've never had such a tough time rooting an Android device.
Click to expand...
Click to collapse
Make sure USB debugging turned on in dev settings.
sbdags said:
Make sure USB debugging turned on in dev settings.
Click to expand...
Click to collapse
It is. As well as"unknown sources."
iamtherizzle said:
It is. As well as"unknown sources."
Click to expand...
Click to collapse
Unknown sources has no effect.
Then you need to update your drivers. The easiest ones to use are the ones in the google sdk. I never had any luck with asus ones. The set I eventually ended up with work really well are attached below.
http://www.androidfilehost.com/?fid=23212708291675384
sbdags said:
Unknown sources has no effect.
Then you need to update your drivers. The easiest ones to use are the ones in the google sdk. I never had any luck with asus ones. The set I eventually ended up with work really well are attached below.
.
http://www.androidfilehost.com/?fid=23212708291675384
Click to expand...
Click to collapse
Great, thanks for posting that link! I'll give it a try when I'm back in town and post an update.
I'm also having trouble rooting, same build and 4.2.1, and the main problem is that SuperSU won't install properly, and manually moving the file won't work due to the fact that I don't have permission...
Anyone find a good solution yet?
I've rooted and installed custom roms on all my HTC phones, never had this much hassle getting it to work.
EDIT: Just got TWRP recovery installed, and SuperSU, using this guide: http://forum.xda-developers.com/showthread.php?t=2187982
I followed the "installing TWRP-recovery" part a bit down, and that's it.

moto g does not boot

hello everyone,
i'm developing a game with unity and sometimes when i compile and inject the game on the phone it crashes and forces me to factory reset the phone through fastboot. i've done it like 3 times already with no problems.
but today it happened again and the phone just wouldnt recover, i've tried the fix that this video (youtube.com/watch?v=laU6NQ0LxR0) shows but it still does not boot.
I am able to enter fastboot and my computer recognizes the mobile phone so that's a great start :victory:
not sure what guide to follow since i'm not sure whether the problem is on the rom or something else.
can someone give me a tip on what fix should I try? cant really afford to lose my phone right now
it has (had) a stock rom 4.4.2 with stock bootloader, tho i tried to install the fix in the video i've said earlier and i'm not sure whether it changed the rom or not.
thanks
pewtel said:
hello everyone,
i'm developing a game with unity and sometimes when i compile and inject the game on the phone it crashes and forces me to factory reset the phone through fastboot. i've done it like 3 times already with no problems.
but today it happened again and the phone just wouldnt recover, i've tried the fix that this video (youtube.com/watch?v=laU6NQ0LxR0) shows but it still does not boot.
I am able to enter fastboot and my computer recognizes the mobile phone so that's a great start :victory:
not sure what guide to follow since i'm not sure whether the problem is on the rom or something else.
can someone give me a tip on what fix should I try? cant really afford to lose my phone right now
it has (had) a stock rom 4.4.2 with stock bootloader, tho i tried to install the fix in the video i've said earlier and i'm not sure whether it changed the rom or not.
thanks
Click to expand...
Click to collapse
What about following this guide?
Landrea said:
What about following this guide?
Click to expand...
Click to collapse
got stuck here :/
dropbox.com/s/d3s378e9pvxs0ab/Screenshot%202014-03-30%2023.17.12.png
pewtel said:
got stuck here :/
dropbox.com/s/d3s378e9pvxs0ab/Screenshot%202014-03-30%2023.17.12.png
Click to expand...
Click to collapse
Have you configured the drivers on your pc? The phone is recognized? It looks like the pc can't dialogate with it
Sent from my Commodore 64 using Videotel
Landrea said:
Have you configured the drivers on your pc? The phone is recognized? It looks like the pc can't dialogate with it
Sent from my Commodore 64 using Videotel
Click to expand...
Click to collapse
the phone is recognized as motorola adb interface, i even re-installed the drivers. now trying a different rom but i'm pretty sure the ROM is not the issue
*edit: yep, still waiting for device even with different ROM
modaco.com/topic/366786-how-to-flash-to-the-standard-uk-rom/
:victory: :victory: :victory:
this worked for me,
posting the link just in case someone encounters the same problem. thanks
pewtel said:
modaco.com/topic/366786-how-to-flash-to-the-standard-uk-rom/
:victory: :victory: :victory:
this worked for me,
posting the link just in case someone encounters the same problem. thanks
Click to expand...
Click to collapse
Thank you for sharing
/Data gets corrupted
Even, I had the same issue. I tried flashing ROMs through recovery but it gave me error that/data/media/0/ can't be mounted. The only way to get out I found was to full format /data and /storage (philz recovery) and then to push ROM. zip to/sdcard through adb and then to flash it through recovery.
Hope it helps someone.:angel:

Categories

Resources