Related
Tried to flash a custom rom, the one linked below I tried to flash it from the KG4 leaked one, and all i get is my phone looping the loading screen, can anyone help?
http://forum.xda-developers.com/showthread.php?t=1157593
did you install a custom rom before? if so.. what rom are u coming from? and do u want to stay on froyo or move to Gingerbread (GB)
nevermind.. I see you came from the KG4 leak.. with GB bootloaders
this is what you need to do
http://forum.xda-developers.com/showthread.php?t=1215748
Please note that if you install the KG4 kernel.. you will need to stay with a gingerbread rom... ps Dsex has a GB ICBINB rom .. just look in the dev page
if you want to stay on froyo flash KC1
let us know if you have problems Good luck
Decided to ignore those steps and just follow the steps on the ICBINB thread and it works now after odin back to KG4
Glad its working for you
OK, I see lots of threads on the new modem available. I've downloaded it and now I have no idea what to do next. Searches don't turn up any instructions since the word 'flash' is used a billion times in this forum.
Anybody got some instructions?
Download the community kernel from the development section and the modem of your choice, put them on your internal SD card. Download sgs kernel flasher from the market. Using sgs kernel flasher flash the community kernel which includes the red clockwork mod recovery. Once that is done, reboot into recovery and flash the modem of your choice. This is how I did it and I'm on infused 1.6.0.
Sent from my SAMSUNG-SGH-I997 using xda premium
Bronk93 said:
Download the community kernel from the development section and the modem of your choice, put them on your internal SD card. Download sgs kernel flasher from the market. Using sgs kernel flasher flash the community kernel which includes the red clockwork mod recovery. Once that is done, reboot into recovery and flash the modem of your choice. This is how I did it and I'm on infused 1.6.0.
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
This is not correct. That is a kernel flasher, not a modem flasher. To flash a modem, go into clockworkmod if you have a version that is compatible with it, then install from sdcard then select from sd card then go find the file. You may want to know where it is in the first place beforehand, usually in the download folder. Then from there just flash it. The words I said may not be exact, but they are something like it. Good luck!
Where can we get a flashable zip at? For the newest modem?
E3D
I presume that means I have to be rooted to do it? That's a disappointment. I'm staying unrooted until the official Gingerbread release. I'm frustrated because I'm still on the original modem version and checking for updates tells me I'm on the latest, which is of course a blatant lie.
First of all, go look for the thread in the devsection on modems. It will be there and thats where you get it to flash. Yea you do have to be rooted, but you may just want to. If you have ot gotten any updates, then you may never. I never did, so i rooted and installed a custom gingerbread rom. Anway if you even do this, you will be able to flash the new gingerbread rom.
Ryanscool said:
First of all, go look for the thread in the devsection on modems. It will be there and thats where you get it to flash. Yea you do have to be rooted, but you may just want to. If you have ot gotten any updates, then you may never. I never did, so i rooted and installed a custom gingerbread rom. Anway if you even do this, you will be able to flash the new gingerbread rom.
Click to expand...
Click to collapse
pay no attention to this, you don't have to be rooted.
in the [MODEMS] development thread, notice how there are CWM flashable zips, as well as odin files for each modem.
odin is your friend in this situation.
Soft bricked(total noob) just got the JIG, got into download menu.
Can someone give me instructions on how to get back to stock, gain root, and install custom ROMS/ MIUI
It be very appreciated, i'm doing this for a buddy and i don't want to give him a brick lol.
1. for restoring stock : http://forum.xda-developers.com/showthread.php?t=731989
2. use superoneclick to root
3. Install clockwork recovery and rom manager
4. Install custom roms.
Wait before you flash that, what firmware version did it come with???
It could mess your phone up if it isn't right.
Sent from my SGH-I897 using xda premium
b-eock said:
Wait before you flash that, what firmware version did it come with???
It could mess your phone up if it isn't right.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
Pretty sure it came with 2.2 but not sure.
Then I wouldn't do that 2.1 Odin one click.... Look for a stock 2.2 Odin or Heimdall, make sure to read thoroughly too.
b-eock said:
Then I wouldn't do that 2.1 Odin one click.... Look for a stock 2.2 Odin or Heimdall, make sure to read thoroughly too.
Click to expand...
Click to collapse
See thats the thing i hate to be a pain but im looking for detailed instructions.
b-eock said:
Wait before you flash that, what firmware version did it come with???
It could mess your phone up if it isn't right.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
thank you for pointing it out
OP might want to look at these threads:
http://forum.xda-developers.com/showthread.php?p=15330252
http://forum.xda-developers.com/showthread.php?t=963403
Note: as b-eock pointed out, make sure what was your stock version before restoring it!
I've always just flashed newer than my stock to avoid that problem and it always works well for me, after bricking or when i want to flash a new rom i flash to cappy gingerbread and flash boog kernal to get CWM(clockworkmod). CWM is essential is you plan on flashing to other roms. If you plan on flashing to another rom anyways it doesn't matter which version of stock you load as long as it work so I'd just flash 2.2 or newer.
http://forum.xda-developers.com/showthread.php?t=1300843
- this has all the odin 1-click flashable packages for captivate
To do everything you want to do...
flash back to stock, use 2.2 or one of the 2.3 versions. If you plan on flashing to a gingerbread rom (2.3) you'll most likely need the gingerbread bootloaders, if you don't originally flash a odin package with the gingerbread bootloaders you might be asked to install them later depending on what rom you use
incase you don't know odin is the computer program used to flash one click packages, you can find it by searching XDA, one click packages won't require it.
odin has to be open before you plug the usb into the phone putting it into download mode.
to flash to other roms you need CWM (ClockWorkMod-a customized recovery mode for the phone) the thread in this post has links to odin flashable kernals with CWM for each software build. To get CWM flash the respective kernal for the version you use. You'll need odin to flash the new kernal, its essentially stock apart from CWM. In odin select PDA and browse to the kernal zip to flash it.
you can search around XDA for oneclickroots, they will typically be odin or CWM flashable it's quite straight forward. New roms will typically already be rooted so you shouldn't have to root again.
good luck!
Does anyone know which exact ODIN i need to flash to get back to 2.2 from download mode.
You can use adamoutler's uckb2 heimdall one click. That's stock 2.2.
But whitch ODIN do i use.
Gez, HTC is so much easier then this samsung!
David522d said:
But whitch ODIN do i use.
Gez, HTC is so much easier then this samsung!
Click to expand...
Click to collapse
Unfortunately, there is currently no Odin one-click of stock Froyo (at least that I'm aware of). If you want stock Froyo, you'll need to either piece it together with full Odin, or use the Heimdall One-Click.
jmtheiss said:
Unfortunately, there is currently no Odin one-click of stock Froyo (at least that I'm aware of). If you want stock Froyo, you'll need to either piece it together with full Odin, or use the Heimdall One-Click.
Click to expand...
Click to collapse
*Update*
I flashed the 2.2 from this http://www.mobiletechvideos.com/blog/?page_id=186
Now i need to root and install recovery please SOMEONE HELP ME!!!! im so ****ty with this crap. Soon as i get recovery ill be straight.
David522d said:
*Update*
I flashed the 2.2 from this http://www.mobiletechvideos.com/blog/?page_id=186
Now i need to root and install recovery please SOMEONE HELP ME!!!! im so ****ty with this crap. Soon as i get recovery ill be straight.
Click to expand...
Click to collapse
Take a look in this post. That should get you the right 3E recovery.
Once you have that, you can either use ROM Manager to install CWM recovery, or see if you can find a kernel with it already baked in and use ODIN to flash the kernel (look for the speedmod kernel).
Or you could flash stock GB, but that updates bootloaders and is a whole different can of worms.
jmtheiss said:
Take a look in this post. That should get you the right 3E recovery.
Once you have that, you can either use ROM Manager to install CWM recovery, or see if you can find a kernel with it already baked in and use ODIN to flash the kernel (look for the speedmod kernel).
Or you could flash stock GB, but that updates bootloaders and is a whole different can of worms.
Click to expand...
Click to collapse
wouldnt it be better to root first? My focus is just getting MIUI on this thing
Another update.
I rooted the 2.2 im on and now enabled non market apps to be downloaded.
Can someone now tell me how to install recovery and install custom ROMS!
i know i know im annoying, im sorry!
David522d said:
wouldnt it be better to root first? My focus is just getting MIUI on this thing
Click to expand...
Click to collapse
Normally, the answer would be yes. However, as part of the Froyo update, AT&T managed to mess up the recovery menu, meaning that it won't flash unsigned packages. This makes getting CWM basically impossible without doing the steps in that post or flashing a different kernel.
You can root if you want to, but doing the steps in that post first will save you some headache.
jmtheiss said:
Normally, the answer would be yes. However, as part of the Froyo update, AT&T managed to mess up the recovery menu, meaning that it won't flash unsigned packages. This makes getting CWM basically impossible without doing the steps in that post or flashing a different kernel.
You can root if you want to, but doing the steps in that post first will save you some headache.
Click to expand...
Click to collapse
I already rooted =/ , should i still try this?
If you have full ODIN, go here, and download the kernel labeled "speedmod-kernel-i897-k13c-500hz.tar" at the end of the first post. Open Odin, and in the "PDA" slot, navigate to the .tar file and flash it. That will get you the speedmod kernel, which has CWM, which you need to be able to flash.
Once it's flashed, just hold V+/V-/Power until it reboots, and then you'll be in CWM and can flash MIUI.
I'm assuming you've backed up all your apps with Titanium Backup, right? If you haven't, do that before you do anything else so you don't lose them.
jmtheiss said:
If you have full ODIN, go here, and download the kernel labeled "speedmod-kernel-i897-k13c-500hz.tar" at the end of the first post. Open Odin, and in the "PDA" slot, navigate to the .tar file and flash it. That will get you the speedmod kernel, which has CWM, which you need to be able to flash.
Once it's flashed, just hold V+/V-/Power until it reboots, and then you'll be in CWM and can flash MIUI.
I'm assuming you've backed up all your apps with Titanium Backup, right? If you haven't, do that before you do anything else so you don't lose them.
Click to expand...
Click to collapse
Im not sure if i have "FULL" ODIN. I have the ODIN i just used to install 2.2. Then i rooted it using SUPER1CLICK.
Where do i get the full odin
Sorry for dumb question.. as I am really novice for installing custom rom..
I read similar contents from [BIONIX BIUI] but there is no Q&A of [BIONIX BIUI] here so allow me to post here...
I was in Darky Rom and switched to FusionXII direct through CWM qithout any problem and now hope to flash BINIX BIUI...
Do I have to flash UCKL2's stock bootloader first through ODIN then should flash KJ2 based custom rom or can flash direct through CWM ???
Anything should I be careful when switching from one rom to another ??
Thanks, guys...
Pls consider I am learning step by step...
Yes you still have bootloadets
Sent from my SGH-I997 using xda premium
Loaders
Sent from my SGH-I997 using xda premium
You should avoid messing with bootloaders whenever possible.
The only reason EVER to flash a bootloader on Infuse is to transition from Froyo to Gingerbread - once you're on a Gingerbread bootloader, if you're staying with a Gingerbread ROM, keep the bootloader.
Entropy512 said:
You should avoid messing with bootloaders whenever possible.
The only reason EVER to flash a bootloader on Infuse is to transition from Froyo to Gingerbread - once you're on a Gingerbread bootloader, if you're staying with a Gingerbread ROM, keep the bootloader.
Click to expand...
Click to collapse
I had GB running. Last night I flashed Infused 1.6.0 (Froyo), and then came back to GB rom, with no issues. So I think once we are on GB, we can switch back and forth while being careful not to mess with CWM.
Or maybe I was lucky 'cos the the line in Infused 1.6.0 changelog:
"Removed recovery binary to prevent the phone from booting into green CWM"
stick with gingerbread bootloaders after you install them
I'd avoid Bionix for the time being. I've been doing this for a while and I it's taking some work to get back.. flash around with the others for a while and get some experience.. Doesn't mean you don't have good work nopco..
Ok, thanks guys...
Sorry again for novice question again..
I want to "Stick" to GB bootloarder... the problem is "HOW?"
I read through forum and found out there is no way to check whether I am in GB' bootloader or not...
Already flashed with UCKL2 Stock Rom once, so can I consider I have GB bootloader now ???
I flashed other rom such as MaxQ, FusionXII and re-flash to BIONIX without Rainbow problem so this is ok now ?
Thanks again for advice again, duds..
diablo009 said:
I had GB running. Last night I flashed Infused 1.6.0 (Froyo), and then came back to GB rom, with no issues. So I think once we are on GB, we can switch back and forth while being careful not to mess with CWM.
Or maybe I was lucky 'cos the the line in Infused 1.6.0 changelog:
"Removed recovery binary to prevent the phone from booting into green CWM"
Click to expand...
Click to collapse
During switch between one rom to another, my device also booted in "Green Recovery" then I ODIN with community kernel to get Red CWM recovery to re-flash other rom.
Did I do something wrong ??
Paxunion said:
During switch between one rom to another, my device also booted in "Green Recovery" then I ODIN with community kernel to get Red CWM recovery to re-flash other rom.
Did I do something wrong ??
Click to expand...
Click to collapse
Everyone has their way of installing roms. What's weird is I have no idea how everyone is getting different color recovery screens other than red. The only recovery I've ever had has always been red in Cwm. Simple if your on Froyo if you flash the community kernel v8 reboot into recovery, you'll be in red Cwm and can flash any rom you want without issues. You don't need to worry about changing the kernel cause most roms come with a kernel and will erase the community kernel v8. Why is this all so difficult?
Sent from my SAMSUNG-SGH-I997 using xda premium
Yes, I also though as you explained...
I have flashed GB based rom as I believe... never flashed to Froyo Rom.
So there should be no worries about bootloader or kernel.
But when I flashed BOINIX which is based on stock Kernel, things messed up with shown Rainbow affect and this was caused because I was in Froyo Kernel as I read.
Ok, so now I want to make really sure I am in GB bootloader.
Question is,
If flashed successfully to GB based Rom, bootloader is not to be concerned ??
Is there anyway to flash ONLY GB BOOTLOADER with ODIN to make sure I am on GB bootloader ?
Sorry again for dumb question again...
I am really, really newbie not only for Infuse but for ANDROID totally so need help and advice.
Thanks, Axiomkid and all...
Paxunion said:
Yes, I also though as you explained...
I have flashed GB based rom as I believe... never flashed to Froyo Rom.
So there should be no worries about bootloader or kernel.
But when I flashed BOINIX which is based on stock Kernel, things messed up with shown Rainbow affect and this was caused because I was in Froyo Kernel as I read.
Ok, so now I want to make really sure I am in GB bootloader.
Question is,
If flashed successfully to GB based Rom, bootloader is not to be concerned ??
Is there anyway to flash ONLY GB BOOTLOADER with ODIN to make sure I am on GB bootloader ?
Sorry again for dumb question again...
I am really, really newbie not only for Infuse but for ANDROID totally so need help and advice.
Thanks, Axiomkid and all...
Click to expand...
Click to collapse
The bootloader are found within the kernel itself. So if you flashed a gb rom using a gb based kernel you are on gb bootloader and not froyo. Froyo stock based kernels may cause rainbow screens cause it won't work with gb roms this is why you are getting them.
Sent from my SAMSUNG-SGH-I997 using xda premium
Axiomkid said:
The bootloader are found within the kernel itself. So if you flashed a gb rom using a gb based kernel you are on gb bootloader and not froyo. Froyo stock based kernels may cause rainbow screens cause it won't work with gb roms this is why you are getting them.
Edit: community kernel v8 works for both froyo and gb. I flash it using sgs kernel flasher from the market and then I'm able to flash gb roms without getting bootloops and other issues. You can't flash a gb kernel over Froyo cause it will cause bootloops and it won't load and you'll have to gtg to stock again.
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I997 using xda premium
@Axiomkid,
Thanks for kind advice, now I know clearly,
1) Bootloader is in the kernel so unnecessary to flash separately.
2) Community kernel V8 works both for Gb and Froyo so it will be ok to flash Community kernel v8 to get Red CWM to re-flash other GB Rom from existing GB Rom.
Another question is,
If I want to flash Froyo Rom from existing GB Rom, what is the right way to do and if flash to Froyo Rom, I am on Froyo Bootloader, right ??
Thanks again & Merry Christmas !
If you wanna go back to Froyo use Odin and flash GTG ultimate unbrick to reformat the phone back to original Froyo.
Sent from my SAMSUNG-SGH-I997 using xda premium
It is very important if you install a rom and you don't like the kernel, sometimes it can be flashed with a different kernel but chances are it will screw your phone up. I tried using a different kernel on someone's rom and I had a tint of yellow on my screen. The Devs give us a kernel that works specifically for their rom and should not be replaced with another kernel unless told otherwise. People get errors cause of this and fill up a lot of forum space asking why their phone is screwed up. You just need to read before installing a rom. Each rom includes each own set of directions.
Most kernels allow overclocking and under volting your phone, and to be honest I don't mess with the settings so I don't end up with a burnt CPU
Sent from my SAMSUNG-SGH-I997 using xda premium
Axiomkid said:
The bootloader are found within the kernel itself. So if you flashed a gb rom using a gb based kernel you are on gb bootloader and not froyo. Froyo stock based kernels may cause rainbow screens cause it won't work with gb roms this is why you are getting them.
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
WRONG. DEAD WRONG.
The bootloader is a COMPLETELY different entity than the kernel.
Custom Gingerbread kernels (such as Infusion-GB and Daily Driver) have a workaround that allows operation with Froyo bootloaders.
However, working video acceleration in the latest leaks can only be obtained with a stock kernel from one of those leaks. If you flash a kernel and system image from a leak (such as UCKL2) and you get rainbows, you need to flash new bootloaders. If you don't get rainbows - you don't need new bootloaders and should avoid flashing them if at all possible.
(Basically, don't flash anything with boot.bin or sbl.bin using Heimdall or Odin once you're on GB bootloaders.)
Entropy512 said:
WRONG. DEAD WRONG.
The bootloader is a COMPLETELY different entity than the kernel.
Custom Gingerbread kernels (such as Infusion-GB and Daily Driver) have a workaround that allows operation with Froyo bootloaders.
However, working video acceleration in the latest leaks can only be obtained with a stock kernel from one of those leaks. If you flash a kernel and system image from a leak (such as UCKL2) and you get rainbows, you need to flash new bootloaders. If you don't get rainbows - you don't need new bootloaders and should avoid flashing them if at all possible.
(Basically, don't flash anything with boot.bin or sbl.bin using Heimdall or Odin once you're on GB bootloaders.)
Click to expand...
Click to collapse
Boy, I wish I read this yesterday.
I had struggled with this yesterday trying to install Bionix using heimdall.
Managd to boot loop in 3e blue recovery several times until I flashed bootloaders in heimdall to get back to a working stock.
Paxunion, if I may suggest, if you are on froyo,
I think it'll be easier for you to use Adam outler's heimdall uckj4 return to stock.
Put your phone in the download mode. Flash it once then flash it again with the bootloader checked.
Go to his second post and flash the kernel to get recovery and then you will have gb bootloader and be able to flash the ROM of your choice.
If you did want Bionix, very nice, use the heimdall package that Dani included in the bionix thread. You won't have to flash the kernel step if you use Dani's heimdall package.
Do not check the repartition or partition box with the bionix flash.
qkster said:
Boy, I wish I read this yesterday.
I had struggled with this yesterday trying to install Bionix using heimdall.
Managd to boot loop in 3e blue recovery several times until I flashed bootloaders in heimdall to get back to a working stock.
Paxunion, if I may suggest, if you are on froyo,
I think it'll be easier for you to use Adam outler's heimdall uckj4 return to stock.
Put your phone in the download mode. Flash it once then flash it again with the bootloader checked.
Go to his second post and flash the kernel to get recovery and then you will have gb bootloader and be able to flash the ROM of your choice.
If you did want Bionix, very nice, use the heimdall package that Dani included in the bionix thread. You won't have to flash the kernel step if you use Dani's heimdall package.
Do not check the repartition or partition box with the bionix flash.
Click to expand...
Click to collapse
I was wondering if anyone actually used that...
good to know it worked out. I've wanted to do a rom with stock kernel for a while but nop can do it better. just glad I could help in a way.
Dani897 said:
I was wondering if anyone actually used that...
good to know it worked out. I've wanted to do a rom with stock kernel for a while but nop can do it better. just glad I could help in a way.
Click to expand...
Click to collapse
I ran into some problem due to checking of the repartition box and screwed up everything. Had to reflashed bootloader to get the phone working again.
I found it was easiest to flash adam's uckj4. Then heimdall fronend your package.
Two steps. Simple. If i have some time, i might do a faq step guide thread in the q a
ok so long story short i tried to flash my samsung infuse 4g with a rom from this website (ROM][Jellybean] CNA 3.5.0 for Samsung Infuse [PORT] ) i used to have froyo 2.2. all was well and then my phone just stopped working and wouldnt pass boot screen. but i saved my old rom's data with clockworkmod on my sd card. the thing is there are like 5 .tar files and i want to know if i can recover my old rom using odin since i cant even get passed the boot screen??? pls someone help me i'm freaking out, ive been googleing all night and i'm totally burnt out. the files i have are .android_secure.vfat.tar, cache.rfs.tar, data.rfs.tar, efs.rfs.tar, nandroid.md5 and system.rfs.tar...... pls someone show me how to fix my phone
thanks in advance
Don't think you can flash those files, but you should be able to go back to stock.
Sent from my sweet & buttery Infuse
Follow these instructions. I would use the zip that takes you back to stock with root.
Keep one thing in mind.....you CANNOT go from Froyo to JB.
http://forum.xda-developers.com/showthread.php?p=27286083#post27286083
I keep this thread bookmarked. I have soft bricked my phone so many times, it's not funny!!!
http://forum.xda-developers.com/showthread.php?t=1700416
Lack of reading/research caused your error :/
Anyways go back to stock with heimdall.or Odin, get red cwm again and you should be able to restore your backups
If you want to go to jb in the future....then you must first follow go to ics, then jb...you have to have ics before you can flash gb
Sent from my HTC PH39100 using Tapatalk 2
thanks again to all the comments, yes this was a big Noob mistake, i guess i was just way to excited to jump on the JB wagon. i have since returned to stock froyo using one of the kernals from this site (Stock_Root-Mod3e-UCKD5_Odin), so this is what i have now... although a little phased i still want to give this a second attemp. the rom i wanted to flash was [ROM][JellyBean] CNA 3.5.0 / Nightly 9/20 for Samsung Infuse [PORT]....
just to get things straight so i don't mess up again, i have to flash froyo with ics (is there a specific ics version i should get? on a how to guide on flashing jb i found this info: Entropy512's CM9 Kernel / Blue CWM Recovery 2012.05.02-ODIN-Entropy-CM9-zImage.rar) can i use this one, i prefer odin b/c i've never used heimdall. then after i flash ics then i can flash to jb.... but reading some threads i saw that....
"Currently on stock Froyo:
1) Use Heimdall or Odin to flash stock UCLB3 (GB)
*Reccomendation: Also flash GB bootloaders. See first post for links and warnings.*
2) Flash Entropy's DD kernel to obtain root and red CWM recovery.
Currently on stock GB:
1) Flash Entropy's DD kernel to obtain root and red CWM recovery."
do i have to do this step or can i go forward with the current Stock_Root-Mod3e-UCKD5_Odin that i now have installed....?
secondly, after i install ics, right before i flash jb it states i have to do an aroma prep....then flash jb.....
all flashes are done with clockworkmod and i wipe only cache and dalvik? or is there anything else i have to wipe?
sorry for all the questions, i have read and researched many threads but they are all pretty overwhelmingly full of lots of info.....just wanna get it in order....
thanks again
from froyo to ics i use odin, from odin to jb i use cwm, correct?
marielacvn said:
thanks again to all the comments, yes this was a big Noob mistake, i guess i was just way to excited to jump on the JB wagon. i have since returned to stock froyo using one of the kernals from this site (Stock_Root-Mod3e-UCKD5_Odin), so this is what i have now... although a little phased i still want to give this a second attemp. the rom i wanted to flash was [ROM][JellyBean] CNA 3.5.0 / Nightly 9/20 for Samsung Infuse [PORT]....
just to get things straight so i don't mess up again, i have to flash froyo with ics (is there a specific ics version i should get? on a how to guide on flashing jb i found this info: Entropy512's CM9 Kernel / Blue CWM Recovery 2012.05.02-ODIN-Entropy-CM9-zImage.rar) can i use this one, i prefer odin b/c i've never used heimdall. then after i flash ics then i can flash to jb.... but reading some threads i saw that....
"Currently on stock Froyo:
1) Use Heimdall or Odin to flash stock UCLB3 (GB)
*Reccomendation: Also flash GB bootloaders. See first post for links and warnings.*
2) Flash Entropy's DD kernel to obtain root and red CWM recovery.
Currently on stock GB:
1) Flash Entropy's DD kernel to obtain root and red CWM recovery."
do i have to do this step or can i go forward with the current Stock_Root-Mod3e-UCKD5_Odin that i now have installed....?
secondly, after i install ics, right before i flash jb it states i have to do an aroma prep....then flash jb.....
all flashes are done with clockworkmod and i wipe only cache and dalvik? or is there anything else i have to wipe?
sorry for all the questions, i have read and researched many threads but they are all pretty overwhelmingly full of lots of info.....just wanna get it in order....
thanks again
from froyo to ics i use odin, from odin to jb i use cwm, correct?
Click to expand...
Click to collapse
Follow all steps, don't skip a thing. As for wiping, wipe Cache, Data, Dalvik, and format /System when going from GB to ICS and ICS to JB. That UCLB3 file is Gingerbread stock and you have to go to gingerbread before you go to ICS.
Also, if you are confident that your phone won't get disconnected from Odin while flashing the UCLB3 file, flash the GB bootloaders while you're at it. If the flash fails while flashing bootloaders then your device is bricked so be sure about Odin before you flash them.
Sent from my SGH-I997 using xda app-developers app
Since you have already used Odin, I would use option "C". The best thing you can do is read everything two or three times. There are also many vids on YouTube that are helpful.
Once you are on GB.....just pick out any ICS ROM an flash it. Once it installs, I wouldn't even bother sitting it up and then you can go to JB.
Th3Bill uses an Aroma installer in his ROMs and the first time you use it, you will have to flash his aroma-prep first.
Hang in there....go slowly...and read. This gets easier and easier the more you do it. I always just d/l the zips to my phone and never even have to mess with the PC.
http://forum.xda-developers.com/showthread.php?t=1613523
Edit: All of his ROMs for the Infuse can be found and d/l at Jokersax.com
Edit: I just reread your post......once you are on GB, you won't use Odin again. You will use whatever ICS zip to flash your ROM using CWM. Same thing with JB.
Shawn said:
Follow all steps, don't skip a thing. As for wiping, wipe Cache, Data, Dalvik, and format /System when going from GB to ICS and ICS to JB. That UCLB3 file is Gingerbread stock and you have to go to gingerbread before you go to ICS.
Also, if you are confident that your phone won't get disconnected from Odin while flashing the UCLB3 file, flash the GB bootloaders while you're at it. If the flash fails while flashing bootloaders then your device is bricked so be sure about Odin before you flash them.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
okay i think i understand....never has my phone disconnected during a flash with odin, ive always gotten a straight pass...exactly how important are the bootloaders anyways? if failures happen b/c of faulty usb cords, then im good...if bricking happens b/c of "unlucky chance" then id rather avoid it.... either way ill start the whole process tonight after i put the kiddos away so i can concentrate 100%.
thanks again for the tips
dparrothead1 said:
Since you have already used Odin, I would use option "C". The best thing you can do is read everything two or three times. There are also many vids on YouTube that are helpful.
Once you are on GB.....just pick out any ICS ROM an flash it. Once it installs, I wouldn't even bother sitting it up and then you can go to JB.
Th3Bill uses an Aroma installer in his ROMs and the first time you use it, you will have to flash his aroma-prep first.
Hang in there....go slowly...and read. This gets easier and easier the more you do it. I always just d/l the zips to my phone and never even have to mess with the PC.
http://forum.xda-developers.com/showthread.php?t=1613523
Edit: All of his ROMs for the Infuse can be found and d/l at Jokersax.com
Edit: I just reread your post......once you are on GB, you won't use Odin again. You will use whatever ICS zip to flash your ROM using CWM. Same thing with JB.
Click to expand...
Click to collapse
okay, ill take ur advice and use option c. froyo to gb using odin and possibly bootloaders, then from gb to ics, ics to jb using cwm
wish me luck!
Bootloaders prevent Rainbow fault I guess you could call it in ICS. You don't have to flash them but its recommended. If you have any problems, post and you'll get help pretty quick.
Sent from my SGH-I997 using xda app-developers app
Shawn said:
Bootloaders prevent Rainbow fault I guess you could call it in ICS. You don't have to flash them but its recommended. If you have any problems, post and you'll get help pretty quick.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
so far so good, it seems i need to do the gb bootloader after all...got the rainbow screen....i have my gbbootloader file ready to go....only thing is i want to confirm where i put the file, i've searched and i can only find a procedure for heimdall not odin...do i put the md5 file in PDA or bootloaders?? also it says in heimdall to tick bootloaders, do i do the same in odin??? it also says to flash twice....?? ok im really not risking a hard brick, i'll be patient and wait
http://forum.xda-developers.com/showthread.php?t=1878458
i'll wait for your answer before i proceed....after this i'll continue to flash ics and then jb...
btw, am i supposed to flash ics twice?? that's what the [GUIDE] How To Flash JB says,
"9. Flash ICS Rom, then ICS Gapps"
but when i tried to flash ics a second time i couldn't (because of rainbow screen, and because it didn't show up in my directory....and where does ICS Gapps show up?
thanks again
If you downloaded the bootloaders linked in the guide, then yes, they go on the pda slot. You only have to flash once.
Heimdall-one click is the one you must flash once before it allows you to flash the bootloaders too.
Edit: to fully install ics you must flash twice, because I believe that what it does when coming from GB is that it just flashes the ics kernel on the first flash, requiring you to run it a second time after rebooting for it to install the complete rom.
Ics gapps are often linked in the rom OPs, although you don't need to flash them if you are headed to JB.
Sent from my sweet & buttery Infuse
andros11 said:
If you downloaded the bootloaders linked in the guide, then yes, they go on the pda slot. You only have to flash once.
Heimdall-one click is the one you must flash once before it allows you to flash the bootloaders too.
Sent from my sweet & buttery Infuse
Click to expand...
Click to collapse
That's odd, I flashed GB bootloaders in Odin from a rooted stock GB. But andros is right about going in the PDA slot. Maybe its just me that didn't have to flash with heimdall first.
Sent from my JellyBeaned Infuse, unofficial cm10
Shawn what I meant is that heimdall one-click wont allow you to flash bootloaders the 1st time, so you must run it once and then a 2nd time but with "flash bootloaders" ticked on.
There's no need to use heimdall before flashing them with Odin.
Sent from my sweet & buttery Infuse
Oh, I see what you mean. My mistake.
Sent from my JellyBeaned Infuse, unofficial cm10
Alright guys, I'm officially a jelly beaner!! Thanks again to all who replied and helped me out, couldn't have done it without your help everything seems to we working fine (with the exception of a few apps that aren't compatible, but they weren't that important ) only issue I have now is that I can't use my data plan and surf the web I configured everything just as I had it before according to my carrier and nothing ...... could it have something to do with the change in modem? When I scan for available network operators I get two options one says :NICMS and the other is just a number 71021... any ideas?
Also, when installing jb in the initial setup it asked which would be the defualt location to save I think I chose the sdcard instead of the emmc directory. ..can I change that setting?
I'm pretty sure you can change the setting, but not sure how. Also, your APNs might be messed up. There's a thread with working APNs. One sec and I'll link it.
Edit: http://forum.xda-developers.com/showthread.php?t=1791526
Sent from my JellyBeaned Infuse, unofficial cm10
Shawn said:
I'm pretty sure you can change the setting, but not sure how. Also, your APNs might be messed up. There's a thread with working APNs. One sec and I'll link it.
Edit: http://forum.xda-developers.com/showthread.php?t=1791526
Sent from my JellyBeaned Infuse, unofficial cm10
Click to expand...
Click to collapse
Thanks for the link Shawn, I looked it over, not sure it could apply since I don't live in the states.. but I'll use it as a start.
marielacvn said:
Thanks for the link Shawn, I looked it over, not sure it could apply since I don't live in the states.. but I'll use it as a start.
Click to expand...
Click to collapse
It probably won't but you never know.
how is [ROM][JellyBean][4.1.1]Unofficial CM10 - Updated CM10 9/14 Butter - MTD - OC Kernel working out? since ive gotten cna nightly my camera and video are extremly buggy, more than id like...what works and doesnt work in unofficial cm10