Related
Just what everyone wants.... another thread about a bricked phone.
I have no idea what happened to my phone.... I have been running Valhalla Final for a week now with no issues to speak of and lost all my ringer tones after a failed attempt to put sound on a boot-loader using Absolute System. I rebooted into recovery and tried to restore my nandroid which failed when it said unable to unmount system. when I rebooted it had fc in android.core multiple times so I rebooted again and after it loaded had no control. did a battery pull and then would not go past the power up screen. downloaded heimdall one click file T959V-UVKJ6-One-Click.jar and put it into download mode. flashed and it went fine until factoryfs failed. now still in download but img is pic of phone to computer. last 2 attempt was
SMS-KJ6-beta2d_Stock-Rom_with_Bootloaders-One-Click.jar and it failed first at loading the modem and then at loading recovery.
I am lost. seems like everything I try makes it little worse. Have not tried ODIN yet.
Is there any hope or am I out a phone?
Give Odin a try. Last time I used Odin it froze so I pulled the plug, and when I put my phone back in download it showed that same screen, yet Odin still went through.
So no, that screen doesn't mean you're out a phone.
Sent from my SGH-T959V using xda premium
95Z28 said:
Give Odin a try. Last time I used Odin it froze so I pulled the plug, and when I put my phone back in download it showed that same screen, yet Odin still went through.
So no, that screen doesn't mean you're out a phone.
Click to expand...
Click to collapse
I was hoping to hear that... what odin file do you suggest... A lot of the links are now dead.
ShadyAce80 said:
I was hoping to hear that... what odin file do you suggest... A lot of the links are now dead.
Click to expand...
Click to collapse
Grab chadster's KG4 here. I believe it has ODIN 1.85 included in the file. Don't mess with any of the check boxes in ODIN; let ODIN decide what to check.
After that, you should be able to get back to KJ6 via a one-click.
Shady grab Ravers stock GB and honks GB odin kernel. Flash Ravers, If you can, then honks. That will give you stock plus cwm. You know where to go from there. Funny thing is just yesterday FB had a post about leaving BOOTLOADERS alone w/o unbrickable mod. Good luck.
Downloading now from sendspace.com
I'm hoping this works...
hechoen said:
Funny thing is just yesterday FB had a post about leaving BOOTLOADERS alone w/o unbrickable mod. Good luck.
Click to expand...
Click to collapse
LOL yeah I read that AFTER the fact... I have been messing with the animations for a few days with out issue... it was only after I trying sound for a day or two that I crashed.
Live and Learn
ShadyAce80 said:
Downloading now from sendspace.com
I'm hoping this works...
Click to expand...
Click to collapse
wait no dude i downloaded that one from sendspace does the download stop and download stop download etc... for you? it did for me i think the files corrupt thomas.raines gave me a newer download link that one from sendpsace is like 197mb the one thomas gives me is 300mb and he said dont flash pit file (he did not include ) because is risky try this one first!!! i tried the sendspace one and it stop at setup connection...
http://dl.dropbox.com/u/54863010/T959VUVKG4.zip
shady
Are you going with the chadsters leak or ravers stock?
I don't know why you guys keep recommending old (leaked) ROMs to debrick with.
@Shady if you see anything posted by myself, dsexton, bhundven or raverx3x you can bet that we've tested it extensively and that it'll work on your phone.
On that note I recommend you read the whole page here:
http://forum.xda-developers.com/showthread.php?t=1358498
Download from the SMS KJ6 (beta2d) Kernel Stock Rom with Bootloaders link. This will get you a one click flash solution that you can go back to when you have problems. This, unlike the KG4 file others have been recommending, is the latest version of gingerbread (KJ6 is 2.3.6) and you'll have a custom kernel + root to boot so you can get flashing other gingerbread ROMs. I hope you don't have trouble flashing, and if you do, read the OP to what I linked you to. All the instructions are there.
I know this file has been failing for you but you can try restarting your computer and flashing it from safe mode. When your computer is booting up, keep pressing F8 until you get a menu. Pick "Safe mode with networking" from the menu using your arrow keys and press enter.
sorry too many tabs open
FBis251 said:
I don't know why you guys keep recommending old (leaked) ROMs to debrick with.
Click to expand...
Click to collapse
Only because he was failing with one-clicks and wanted to use ODIN. That one (KG4) has always worked for me, so I was basing it off of experience. Never claimed it was optimal
I know this file has been failing for you but you can try restarting your computer and flashing it from safe mode. When your computer is booting up, keep pressing F8 until you get a menu. Pick "Safe mode with networking" from the menu using your arrow keys and press enter.
Click to expand...
Click to collapse
Never thought about trying it from safe mode. Nice idea.
FBis251 said:
I don't know why you guys keep recommending old (leaked) ROMs to debrick with.
Click to expand...
Click to collapse
That's what I'm saying. I don't use heimdell(because my computer hates it for some reason). So ravers stock GB and honks kernel to get cwm works well to set me back up.
ShadyAce80 said:
glad you posted this. download just completed. i haven't done anything with this file yet... will follow your link.
Click to expand...
Click to collapse
oh after they say to flash the bhuvden kernel well that is what they told me to get rid of gremlines or something, then flash the custom rom, youll have cwm and such, tell me how it goes .
To all of you thank you very much for your help... I think I have my phone back.... Our fembot Linda is doing her thing right now...
@FB I tried one click method in safe-mode and it was unable to find the drivers even after reinstalling a few times.. restarted in normal mode and gave it one more shot and I now have my phone back.
Thanks again for all the help.
hechoen said:
That's what I'm saying. I don't use heimdell(because my computer hates it for some reason). So ravers stock GB and honks kernel to get cwm works well to set me back up.
Click to expand...
Click to collapse
I totally forgot he made a stock ODIN. My bad!
I really need to rewrite the starter pack to have heimdall one click instructions. Nobody ever got around to making it.
I've only given the guide a cursory look at times, but I'd be willing to draft something for the guide if thst helps keep you focused on developing.
Sent from my SGH-T959V using xda premium
stephen_w said:
I've only given the guide a cursory look at times, but I'd be willing to draft something for the guide if thst helps keep you focused on developing.
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
A video would be perfect. Been busy with school since I just started and now I got a gig making a website so I'm also working on that.
FBis251 said:
A video would be perfect. Been busy with school since I just started and now I got a gig making a website so I'm also working on that.
Click to expand...
Click to collapse
I've never done the video thing. Guess I can research it and give it a go.
I tried going back to gingerbread using Heimdall 1 click and it gives me a kernel error and failed. Now phone won't boot past the rogers logo. Any suggestions? No samsung screen. No green battery indicator when plugged in. Heimdall does detect the phone, and I've tried all USB ports and cords at my disposal. I use a mac so no access to odin. This is the first brick I haven't been able to get myself out of. Any help you would be appreciated
I am a gt i9000 owner, but can you get into download mode?
Sent by Santa Clause
If you can get download mode, then flash a gingerbread stock rom, even if it means you will lose root still do it, then flash a new rom of your choice, if you can get into download mode then you haven't got a brick
Sent by Santa Clause
Been bricked more than once...you have?
Embarking on a fresh new ROM without educating oneself can be very frustrating....since your on a Mac..with in the one click you say it reading your phone...can you get to download mode?
Pull battery
Plug in USB to phone
Hold both volume button
Pop battery back in
Do you see...the yellow Android digging?
http://forum.xda-developers.com/showthread.php?t=1293751
bigjoe2675 said:
Been bricked more than once...you have?
Embarking on a fresh new ROM without educating oneself can be very frustrating....since your on a Mac..with in the one click you say it reading your phone...can you get to download mode?
Pull battery
Plug in USB to phone
Hold both volume button
Pop battery back in
Do you see...the yellow Android digging?
Click to expand...
Click to collapse
I can get into download mode.heimdall detects my phone. I tried both qksters and adam outlers 1 click. neither would take. If I upgrade heimdall version (as it tells me its out of date) it wont get through the initial connection to the phone. if I use with out upgrade it continues to fail on kernel download.
This is my second brick (first one was when trying to root it on my mac) First brick was fixed through odin at my work. Unfortunately I don't want to wait till monday to have a functioning phone
teknhard said:
I can get into download mode.heimdall detects my phone. I tried both qksters and adam outlers 1 click. neither would take. If I upgrade heimdall version (as it tells me its out of date) it wont get through the initial connection to the phone. if I use with out upgrade it continues to fail on kernel download.
This is my second brick (first one was when trying to root it on my mac) First brick was fixed through odin at my work. Unfortunately I don't want to wait till monday to have a functioning phone
Click to expand...
Click to collapse
Hummmm..ok
Let's step back here does out prompt you for drivers?
....you might have to make a stop at your office..
Try different USB ports, I used heimdall yesterday to go back to gingerbread (so I could get the boot loaders) and I had the same problem as you, I finally got it to work with a different USB port and even then it kept failing...but I just kept trying and eventually it went through
(Pull battery, place battery back in, hold volume up and down, plug USB in-should put you in download mode...even if you can't see anything on your screen you can still enter download mode)
Sent from my SGH-I997 using XDA
DOesnt prompt me for drivers. It detects my phone and says ready to flash. I see the download mode screen. so its not completey screwed. Just can't get past the rogers logo.. I only have two USB on my macbook.. tried both quite a few times guess i'll mess with it some more. see if I can get it going. Thanks for the tips. ANy others ideas would also be appreciated
Alright, here it is:
I encountered the same problems yesterday, heimdall doesn't work when flashing back to stock from ics, from what I've found, you must use gtg's ultimate unbrick, the pit repartitions everything and also resets your binary counter (cha-ching! ). Once completed, your phone will reboot and be stuck at "...installing default apk files..." for a few minutes, don't panic, let it run its course. From there on, you can do the usual root/flash cwm deal. .
Sent from my SGH-I997 using Tapatalk 2 Beta-5
theROMinator said:
Alright, here it is:
I encountered the same problems yesterday, heimdall doesn't work when flashing back to stock from ics, from what I've found, you must use gtg's ultimate unbrick, the pit repartitions everything and also resets your binary counter (cha-ching! ). Once completed, your phone will reboot and be stuck at "...installing default apk files..." for a few minutes, don't panic, let it run its course. From there on, you can do the usual root/flash cwm deal. .
Sent from my SGH-I997 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
Funny I just did that yesterday using qkster heimdall after running the ics for the day....no issues utilizing it...so i say it does work...
theROMinator said:
Alright, here it is:
I encountered the same problems yesterday, heimdall doesn't work when flashing back to stock from ics, from what I've found, you must use gtg's ultimate unbrick, the pit repartitions everything and also resets your binary counter (cha-ching! ). Once completed, your phone will reboot and be stuck at "...installing default apk files..." for a few minutes, don't panic, let it run its course. From there on, you can do the usual root/flash cwm deal. .
Sent from my SGH-I997 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
I went back to stock from ics yesterday using heimdall...just took a long time and a lot of tries
I really think it depends on the computer though, for some Odin works best...for others heimdall works best
Sent from my SGH-I997 using XDA
bigjoe2675 said:
Funny I just did that yesterday using qkster heimdall after running the ics for the day....no issues utilizing it...so i say it does work...
Click to expand...
Click to collapse
I did not mean to be misleading, as you both have said, either or may work, I simply wanted to share my experience
mg2195 said:
I went back to stock from ics yesterday using heimdall...just took a long time and a lot of tries
I really think it depends on the computer though, for some Odin works best...for others heimdall works best
Sent from my SGH-I997 using XDA
Click to expand...
Click to collapse
Sent from my SGH-I997 using Tapatalk 2 Beta-5
mg2195 said:
I went back to stock from ics yesterday using heimdall...just took a long time and a lot of tries
I really think it depends on the computer though, for some Odin works best...for others heimdall works best
Sent from my SGH-I997 using XDA
Click to expand...
Click to collapse
Agreed. On my desktop (quad core 6 gb ram, watercooled blablablabl) can't run heimdal nor Odin to save its life.
My netbook (single core atom) took me back from CM9 with Odin like it was nothing.
My 7 year old laptop (running Ubuntu) works great using Heimdal (just run the .jar file as an executable)
theROMinator said:
I did not mean to be misleading, as you both have said, either or may work, I simply wanted to share my experience
Sent from my SGH-I997 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
No ... understood..no worries...there are some many that have never flashed or much less read anything regarding flashing are having so many prob`s...when this ics it's still bring birthed...for the infuse.
Instead of going to the dev section and doing some home work...understanding the basic info....they see ICS and have pictures of Sunday treats....in their mind...having no clue about the current ROM they are on now...Then the questions pop up...from individuals...after wards yelling SOS...But hey it's their phone.
bigjoe2675 said:
No ... understood..no worries...there are some many that have never flashed or much less read anything regarding flashing are having so many prob`s...when this ics it's still bring birthed...for the infuse.
Instead of going to the dev section and doing some home work...understanding the basic info....they see ICS and have pictures of Sunday treats....in their mind...having no clue about the current ROM they are on now...Then the questions pop up...from individuals...after wards yelling SOS...But hey it's their phone.
Click to expand...
Click to collapse
I've flashed lots of roms and never had any issues. Also looked through the forum and know the basics about getting back to stock. I'm no expert, but I have a decent idea what I'm doing. I do appreciate a forum you can ask questions though and have people help out when your stumped. I did what i could from the tools I have at my disposal here, and ran into some problems. I'm not yelling SOS, just asking for some tips as what I have tried hasn't worked. All the same I do appreciate everyones opinions and help they provide. THat's what makes this forum great.
why would you need to heimdall if you are on a rogers infuse? Isn't that for AT&T phones only?
teknhard said:
I've flashed lots of roms and never had any issues. Also looked through the forum and know the basics about getting back to stock. I'm no expert, but I have a decent idea what I'm doing. I do appreciate a forum you can ask questions though and have people help out when your stumped. I did what i could from the tools I have at my disposal here, and ran into some problems. I'm not yelling SOS, just asking for some tips as what I have tried hasn't worked. All the same I do appreciate everyones opinions and help they provide. THat's what makes this forum great.
Click to expand...
Click to collapse
I apologize wasn't directed to you just in general and your correct this forum is great...
Then reflash ics lol
Sent from my SGH-I997 using xda premium
threi_ said:
why would you need to heimdall if you are on a rogers infuse? Isn't that for AT&T phones only?
Click to expand...
Click to collapse
Because I don't have access to a PC for Odin, and the at&t should work to get me out of brick state. I currently can't get past rogers boot screen
GoSooners345 said:
Then reflash ics lol
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
I don't have recovery.. otherwise I certainly would have
Hello, I am a long-time viewer of xda but a new member, this is my first post.
(and yes, i looked for a similar theard. i could not find one.)
So, onto the problem.
I flashed Infinitum 1.1.1 to my Infuse using cwm recovery. I noticed problems right off the bat when after i had installed the zip, i rebooted into recovery then it got stuck on the samsung logo and i had to pull the battery (a normal event when flashing this rom) So when i pulled the battery and booted into recovery to try again, the cwm recovery was terribly screwed up. The top half of the screen was pixelated, and the navigation menu was off center. I was still able to use cwm to flash the rom successfully, But cwm remains srewed up.
So i tried to reflash cwm recovery using rom manager. but when i rebooted i was stuck in a recovery boot-loop that i had to get out of using odin.
I then flashed the rom again using the same procedure suggested by its developer, and it worked, but cwm is still acting as it was before. (the pixelated top half of the screen and the off center navigation menu. )
So can i get some help? i thought about removing cwm the using some other recovery. I also heard that cwm wont work on ics, but im unsure what it is.
Thanks in advance.
You don't have Gingerbread bootloaders. That's why recovery looks the way it does.
You need to Odin or Heimdall back to Gingerbread stock (I find Heimdall much easier for this) and then flash Entropy's DD kernel to get back into red recovery to flash Infinitum.
Posts 1 and 2 in this thread are what you need: http://forum.xda-developers.com/showthread.php?t=1524081
lukas_s said:
You don't have Gingerbread bootloaders. That's why recovery looks the way it does.
You need to Odin or Heimdall back to Gingerbread stock (I find Heimdall much easier for this) and then flash Entropy's DD kernel to get back into red recovery to flash Infinitum.
Posts 1 and 2 in this thread are what you need: http://forum.xda-developers.com/showthread.php?t=1524081
Click to expand...
Click to collapse
I i came from froyo, and is there a way to get the bootloaders without reverting to gingerbread stock?
Hard2thexcore said:
I i came from froyo, and is there a way to get the bootloaders without reverting to gingerbread stock?
Click to expand...
Click to collapse
Yeah, ICS recovery doesn't play nice with Froyo bootloaders.
AFAIK, there is no way to get Gingerbread bootloaders without reverting to stock. With Heimdall it's an incredibly simple, and quick process. I just had to do it myself a couple nights ago
lukas_s said:
Yeah, ICS recovery doesn't play nice with Froyo bootloaders.
AFAIK, there is no way to get Gingerbread bootloaders without reverting to stock. With Heimdall it's an incredibly simple, and quick process. I just had to do it myself a couple nights ago
Click to expand...
Click to collapse
Thank man, one more thing, will going back to gingerbread stock work if the only time i have ever used gingerbread was when i used the Zeus rom. The only other thing i have had besides zeus and this ics rom was froyo.
Hard2thexcore said:
Thank man, one more thing, will going back to gingerbread stock work if the only time i have ever used gingerbread was when i used the Zeus rom. The only other thing i have had besides zeus and this ics rom was froyo.
Click to expand...
Click to collapse
Yup, it'll work just fine
Just follow all the instructions for Heimdall to a T (there aren't many) and everything will be fine
Yeah...heimdal is the best way to get bootloaders...odin doesnt always do it and no custom rom includes them that i am aware of...
I had written detailed instructions for another person...ill try and find them and paste it here...
Also-dont use rom manager, that thing is known to cause bricks/bootloops so using it is asking for bad ju-ju lol
Sent from my SAMSUNG-SGH-I997 using XDA
mg2195 said:
Have you tried flashing boot loaders?
Here is how to do it...
1) Download uclb3 heimdal by qckster
2) open the program
3) put phone in download mode
4) click flash (leave program open when finished DO NOT CLOSE)
5) after it finishes and your phone reboots, put the phone back in download mode and reconnect to PC
6) click flash bootloader on the heimdal program you left running
7) flash, let reboot and your problems should be gone
Download mode instructions
1) pull battery
2) put battery back in
3) hold volume up + down
4) connect phone to PC with USB cable *don't let go of volume*
Just because you were on gingerbread previously does nit mean you have ginger bread boot loaders...I had ginger bread since the first leaks and did not have boot loaders until a month or two ago when I flashed them using those steps above...
Good luck!
Sent from my SGH-I997 using XDA
Click to expand...
Click to collapse
There you go...follow those instructions and your cwm will be fixed!!!
Also just added it to my op of infinitum...
Sent from my SAMSUNG-SGH-I997 using XDA
Thank you for posting the guide. I literally just got done flashing GB bootloaders to my Infuse because of the rainbow Recovery when I'm on ICS. I used Odin though and used GB loader that a member posted in the AOKP Uniporn thread. I was scared but there really isn't anything to be afraid of. I tried using Heimdall but dang that was nerve racking because I was trying to use it on Mac and it wouldn't let me do the flash.
Jammol said:
Thank you for posting the guide. I literally just got done flashing GB bootloaders to my Infuse because of the rainbow Recovery when I'm on ICS. I used Odin though and used GB loader that a member posted in the AOKP Uniporn thread. I was scared but there really isn't anything to be afraid of. I tried using Heimdall but dang that was nerve racking because I was trying to use it on Mac and it wouldn't let me do the flash.
Click to expand...
Click to collapse
Good deal, glad you got it sorted out. And to clear up some confusion that is in this thread: you don't have to flash an entire Gingerbread rom to get the bootloaders. We all have our preferred ways of doing it, but you CAN flash just the bootloaders.
Here is both a Heimdall and an Odin way to get JUST the bootloaders. That's all that is necessary for someone who has rainbow distortion issues on an ICS or Gingerbread rom.:
See the third post (HERE) in Entropy512's Unofficial CM9 thread for instructions on how to flash just the bootloaders using the Heimdall command line. Or, see the answer to question 1.) in the FAQ of the rooted UCLB3 Odin thread which is HERE.
mg2195 said:
Yeah...heimdal is the best way to get bootloaders...odin doesnt always do it
Click to expand...
Click to collapse
Heimdall is one way to get the bootloaders, and here's how I did it.:
heimdall flash --primary-boot boot.bin --secondary-boot Sbl.bin
The second part of your statement isn't true. Odin doesn't do it only when the user can't figure out how to use Odin.
thank you everyone.
Being a creature of habit i ended up flashing to rom and bootloaders using odin. that did indeed fix CWM right up.
GB loader
Jammol said:
Thank you for posting the guide. I literally just got done flashing GB bootloaders to my Infuse because of the rainbow Recovery when I'm on ICS. I used Odin though and used GB loader that a member posted in the AOKP Uniporn thread. I was scared but there really isn't anything to be afraid of. I tried using Heimdall but dang that was nerve racking because I was trying to use it on Mac and it wouldn't let me do the flash.
Click to expand...
Click to collapse
I am trying to get those GB Bootloaders. Would you be able to provide them ? or to provide the AOKP Uniport thread ?
RemiChartier said:
I am trying to get those GB Bootloaders. Would you be able to provide them ? or to provide the AOKP Uniport thread ?
Click to expand...
Click to collapse
Unfortunately I haven't had this device for over 3 years now. You'll have to do some searching for that.
Jammol said:
Unfortunately I haven't had this device for over 3 years now. You'll have to do some searching for that.
Click to expand...
Click to collapse
Thanks, I have found the GG boot.bin and sbl.bin in another thread, I will update later on this thread.
RemiChartier said:
Thanks, I have found the GG boot.bin and sbl.bin in another thread, I will update later on this thread.
Click to expand...
Click to collapse
Where did you find them? Please share...
I rooted and put a octane 2.x rom on her phone 9 months ago. Today she said everything started acting up. Radio quit, would not connect. All the apps force closed. She kept getting an error saying GoLauncher needs to be re-installed so she went back to the ics launcher that comes with the room. No apps would work at all.
I came home and booted into recovery (Clockwork) and tried to do a restore. Now it's stuck at the boot up screen. I've done a battery pull and it still does it. This is not my phone and I'm not well versed with it. It took me 11 hours root/rom it last June.
I do not know adb shell. I tried, but I just don't think I have a strong enough computer background. I've rooted my old Thunderbolt, my Transformer Prime and her phone.
If I could get to recover I'd do a wipe and re-install the rom. I still have Heimdall, but I do not remember how to use it. I bricked it when I rooted it the first time, that's why it took so long.
I will be searching while this thread is up. She needs her phone ASAP b/c she interviewed for a job today and she's expecting/hoping for a call.
Follow the guide in this link http://forum.xda-developers.com/showthread.php?t=1358498
Basically put your phone in download mode and click on one of Heimdall versions to get your phone back to factory. Click on the bootloader option as well in Heimdall.
Sent from my SGH-T959V using xda premium
Is there an option to NOT go back to factory un rooted? It took me so much time to root it, I don't want it to all be a waste. Stock rooted would be fine.
There is a heimdall version that will get you rooted and factory. Flash that version. That version was by eollie, in the second post, second link. Or you can flash the Heimdall stock rom and later flash with Heimdall AntonX kernel to get it rooted. All in the link above, so read it all the way down.
Sent from my SGH-T959V using xda premium
gizmoscoop said:
There is a heimdall version that will get you rooted and factory. Flash that version. That version was by eollie, in the second post, second link. Or you can flash the Heimdall stock rom and later flash with Heimdall AntonX kernel to get it rooted. All in the link above, so read it all the way down.
Sent from my SGH-T959V using xda premium
Click to expand...
Click to collapse
Got it thanks.
Only has Edge and wifi is not working.....
Since it wasn't asked... WHAT phone are you trying to fix? Is it actually a SGH-T959V or is it something else?
Theraze said:
Since it wasn't asked... WHAT phone are you trying to fix? Is it actually a SGH-T959V or is it something else?
Click to expand...
Click to collapse
Yes. Give me SOME credit lol
You have to reflash the blast off kernel after Eollie's one-click to get wifi working
natypes said:
Only has Edge and wifi is not working.....
Click to expand...
Click to collapse
Flash with Heimdall stock version then AntonX. You should get wifi.
Dont say 'thank you', hit the 'thanks' button instead.
natypes said:
Yes. Give me SOME credit lol
Click to expand...
Click to collapse
I give no credit until it's been proven. You'd [apparently] be amazed at how many people brick their phones or get exactly what you just described by flashing our ROMs on the wrong phones.
Hello everyone,
It's my first time witnessing this issue, I do have a Samsung Galaxy S 4G. So I decided to upgraded Eclairs to Gingerbread. Which I did.
Somehow I downloaded the CM7 ROM in the SGS 4G section, I have flashed it and now everytime I click "reboot system now", it's just putting me back to CWM Recovery over and over again. Now I got tired of it, so I tried flashing the SlimBean in hopes of making my device work the way they should, but it's the same result. When I cleared data, flashed the ROM and Gapps and when I click "reboot system now", It shows the boot screen but then it transferred me back to recovery. I don't really know what to do.
Urgent help needed. Thank you all.
can you acess into download mode?
PuNeTZzZ said:
can you acess into download mode?
Click to expand...
Click to collapse
Yes I can, also tried it with CM9, same results it shows recovery everytime. I need some help. :crying:
You say you went from Eclair (Did this phone even come with that? I thought it started with Froyo. Huh. At least, mine did.) to Gingerbread. Is the Gingerbread you started with CM7, or did you start with one that actually has normal GB bootloaders first? Because if you haven't yet, as with any major bootlooping issue, you'll want to use a proper GB one-click. If you failed to double-flash one of those to get the GB bootloaders earlier, do that ASAP. And hope hard that they come.
You are missing the boot loader if you went straight to Gingerbread. Use Heimdall One Click to flash to Gingerbread. Also click on the bootloader option as well when you flash.
Sent from my SGH-T959V using xda premium
Theraze said:
You say you went from Eclair (Did this phone even come with that? I thought it started with Froyo. Huh. At least, mine did.) to Gingerbread. Is the Gingerbread you started with CM7, or did you start with one that actually has normal GB bootloaders first? Because if you haven't yet, as with any major bootlooping issue, you'll want to use a proper GB one-click. If you failed to double-flash one of those to get the GB bootloaders earlier, do that ASAP. And hope hard that they come.
Click to expand...
Click to collapse
Can you give me the names of the GB one-click?
Search for lumin30. He has an awesome guide and links to what you are looking for. It's in his signature.
I'll add, back up your .efs folder. Put copy on your computer.
champ1919 said:
Search for lumin30. He has an awesome guide and links to what you are looking for. It's in his signature.
I'll add, back up your .efs folder. Put copy on your computer.
Click to expand...
Click to collapse
Can anyone tell me this guide works on starting from a CM7 Rom. I don't get it at all. Since it started from Stock Froyo.