Database Info

[Q] boot loop

Hey I hate having to post this but im stumped. i was running cm7 nightly build 21 and wanted to flash back to stock pd15img. i followed the steps but when i went to update all it did was turn s on. now my mytouch gets to the animated MY logo and loops. i can still get to recovery and i have tried restore my backup but i still get the MY animated boot logo. any help or suggestions? thanks.

Did you revert your recovery back to stock or Clockwork 2.x instead of Clockwork 3.x that CM7 requires?

Genocaust said:
Did you revert your recovery back to stock or Clockwork 2.x instead of Clockwork 3.x that CM7 requires?
Click to expand...
Click to collapse
Yep. 2.5.1.2.. I even tried just flashing icedglacier but i still get the animated MYlogo wich continues to loop.
does the phone have to be rooted to fix this? It was prior to flashing the PD15IMG, but like i said when it was done loading the image i clicked update and it just turned s on....

okay so i just made some progress i think. i just flashed icedglacier again and this time it changed the boot logo to the icedglacier boot logo but it still loops.
on the bright side of things i was really tire of seeing the mytouch logo.

theycallmechase said:
Yep. 2.5.1.2.. I even tried just flashing icedglacier but i still get the animated MYlogo wich continues to loop.
does the phone have to be rooted to fix this? It was prior to flashing the PD15IMG, but like i said when it was done loading the image i clicked update and it just turned s on....
Click to expand...
Click to collapse
the PD15IMG is a HBoot flashed image. not via Clockwork's Recovery Manager.
What method did you follow to try and unroot your phone.
We kinda need to know what you did in order to fix it.
If you store the PD15IMG onto the root of the SD card and boot into bootloader it should automatically restore everything to a factory spec.

I unrooted my device by downloading the unroot folder and using visionary and the terminl emulator.
I didnt try to flash pd15img through clockworkmod i just put it on the root of my sd card and let the hboot do the rest once it loaded the image it gave me he update option i chose to update and when my phone came back on in hboot i saw s off and now im stuck in boot loop.
I have to get to work but if you think of anything that could help me out trhat would be awesome thanks guys for reading this in the first place
ps now if i try to load the pd15img it will load the image but there is no update opyion

theycallmechase said:
I unrooted my device by downloading the unroot folder and using visionary and the terminl emulator.
I didnt try to flash pd15img through clockworkmod i just put it on the root of my sd card and let the hboot do the rest once it loaded the image it gave me he update option i chose to update and when my phone came back on in hboot i saw s off and now im stuck in boot loop.
Click to expand...
Click to collapse
Try doing this. Esp. if you did the ./gfree deal.
http://forum.xda-developers.com/showthread.php?t=863899

I also made this mistake, I had to reflash a cm7 rom or miui, downgrade the recovery to 2.5.x (could also adb push) and from there went back to stock and rerooted and flashed ice glacier.

well im downloading sdk now. my internet is super slow.

theycallmechase said:
well im downloading sdk now. my internet is super slow.
Click to expand...
Click to collapse
you are just wanting the ADB you can download and install the drivers for just that. Takes like 5 mins to get up and running.

neidlinger said:
you are just wanting the ADB you can download and install the drivers for just that. Takes like 5 mins to get up and running.
Click to expand...
Click to collapse
cool drivers are installed. so do i just need to be hboot to use the drivers? or is there some sort a software i need?

theycallmechase said:
cool drivers are installed. so do i just need to be hboot to use the drivers? or is there some sort a software i need?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=928370&page=2

neidlinger said:
http://forum.xda-developers.com/showthread.php?t=928370&page=2
Click to expand...
Click to collapse
hahaha thanks bro, love the "(great for noobs)" in the title of the thread. will try as soon as possible.
after reading the guide i have one problem.
5. On your phone go to Settings/Applications/Development and make sure USB debugging is ON and plug it in via the usb..
any suggestions??

theycallmechase said:
hahaha thanks bro, love the "(great for noobs)" in the title of the thread. will try as soon as possible.
after reading the guide i have one problem.
5. On your phone go to Settings/Applications/Development and make sure USB debugging is ON and plug it in via the usb..
any suggestions??
Click to expand...
Click to collapse
Being that you have s=on it's going to be fairly difficult. [sidenote] i still cannot believe the PD15IMG didn't work for you [/sidenote]. but you can try and use the fastboot commands.If s=off you could load a separate recovery image and flash a ROM to get you up and running.

yeah, i knew this would happen to me. when i try to adb in it dosent show my device. i have a thing with best buy where they will mail it in to htc to have it fixed but im not sure since i modded the phone.

theycallmechase said:
yeah, i knew this would happen to me. when i try to adb in it dosent show my device. i have a thing with best buy where they will mail it in to htc to have it fixed but im not sure since i modded the phone.
Click to expand...
Click to collapse
since you are in fastboot you cannot use
adb devices
Click to expand...
Click to collapse
you have to use
.
fastboot devices
Click to expand...
Click to collapse

ok so adb devices gave me a list of devices wich was none.
fastboot devices did not do anything for me.
wait a minute.... it did show something a second time it says sh0bt602653 fastboot....

Ok, that means fastboot has detected your phone. You can flash individual system.img, recovery.img, etc directly from fastboot.

so what do i flash? what commands do i need to use.

C:\adb>fastboot -p sh0b7t602653 update update.zip
Whoops: didn't find expected signature
read_central_directory_entry failed
πmªeΩ▲K¡8|x¥►╬←ì☻²╣⌂ì╒▄╞)ⁿ‼♀÷ta in 'h↑τ‼
íTQ▬á╠4δ/l≤huä╘:ì{îC`╢r◄+m§┌╪é^EÇkm☺ªfR
⌠èc┘↕á(╚αñ-0←♫┌╗ê-UY#è°┌o◄■k┤▐╩_``╠FA∞9 ÄM°c↑Sl░LΩ¥♣⌠q╦è╬5è╖P»ìì_j↑û♦ß‼[Γ╞ö¶¡l∙K
╬@↓%$»}ÅKù⌡ΘP9♂₧▒≤☺■Wm3┴pß|*╩°φ`Dú╞▒m└√±←╓6↓A¬]W,ùa½↓εWX╗ôâ\?o\ö~y╚` ╨%█εç←╚q
¶╩♥&ò⌂M─)_5m8ù╢+'⌠y<BWδ¼
!╩X┘♫■s▐k╗wS";öPôBÇ1Yé↔è_ÿ∟╧♫â`↕á┘h▐]∟-╟;»5
▼Ç↨♥H·ò⌠ƒQ²'►╟Oç∙╗Y∟ì▲67╘%)▐∩╘kO¥▬Θî☼R∟┴¼'

i cant do Recovery

hello, im trying to install a custom rom, and now im in recovery step. i installed like 3 different recoverys.
all of them stuck in the red text step(when i get in to recovery mode from bootloader), and even after 20-30 mins still in the same position.
can someone say me when i need to do? i really need to fix it.

Snow201 said:
hello, im trying to install a custom rom, and now im in recovery step. i installed like 3 different recoverys.
all of them stuck in the red text step(when i get in to recovery mode from bootloader), and even after 20-30 mins still in the same position.
can someone say me when i need to do? i really need to fix it.
Click to expand...
Click to collapse
Make sure you are not plugged into your pc when you boot to recovery! - if that doesn't solve it ..
Does the phone boot to the existing Rom, do you have Rom manager installed? - if so update the recovery from Rom Manager. I found that after rooting the One S using the toolkit I could not get in to recovery, the update from Rom Manager sorted it!
All the best :good:

FatherD said:
Make sure you are not plugged into your pc when you boot to recovery! - if that doesn't solve it ..
Does the phone boot to the existing Rom, do you have Rom manager installed? - if so update the recovery from Rom Manager. I found that after rooting the One S using the toolkit I could not get in to recovery, the update from Rom Manager sorted it!
All the best :good:
Click to expand...
Click to collapse
i tried before to get in to recovery mode without USB(plugged to my computer or to charger) and still same problem.
and i dont have any rom manager.
i got HTC one S only with Unlocked phone and recovery(that doesnt work), so i think i need root for rom manager.
got something else?

Snow201 said:
i tried before to get in to recovery mode without USB(plugged to my computer or to charger) and still same problem.
and i dont have any rom manager.
i got HTC one S only with Unlocked phone and recovery(that doesnt work), so i think i need root for rom manager.
got something else?
Click to expand...
Click to collapse
Had same issue with the tool kit, the cwm didnt stick. The Touch work one did stick and I was able to get into recovery. However I downloaded the app ROM MANAGER and flashed the recovery from there. Since then I've had no issues booting into reocvery or bootloader. Just download rom manager and go about it that way!

osugsxr said:
Had same issue with the tool kit, the cwm didnt stick. The Touch work one did stick and I was able to get into recovery. However I downloaded the app ROM MANAGER and flashed the recovery from there. Since then I've had no issues booting into reocvery or bootloader. Just download rom manager and go about it that way!
Click to expand...
Click to collapse
NVM, there is no recovery for HTC at all, only Galaxy and some more. what i need to do?

I had this problem when I first rooted its weird just download the recovery again but save straight to fastboot folder wherever u have the folder and don't rename then flash the recovery that's how mine worked
Sent from my HTC One S using xda premium

k1llacanon said:
I had this problem when I first rooted its weird just download the recovery again but save straight to fastboot folder wherever u have the folder and don't rename then flash the recovery that's how mine worked
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
but i dont have root... and for root my phone i need recovery
there is some other way to root?
because the ROM manager doesnt work well without root.(cant install new recovery)

Snow201 said:
but i dont have root... and for root my phone i need recovery
there is some other way to root?
because the ROM manager doesnt work well without root.(cant install new recovery)
Click to expand...
Click to collapse
I'm not telling you to use Rom manager =\
Sent from my HTC One S using xda premium

k1llacanon said:
I'm not telling you to use Rom manager =\
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Ohh. .. but still in tried install the recovery like 2-4 times.
There is other way?

Snow201 said:
Ohh. .. but still in tried install the recovery like 2-4 times.
There is other way?
Click to expand...
Click to collapse
Which recoveries have you tried, and what version of phone do you have (S3 or S4). These must match.
Make sure you bootloader unlocked OK, check in bootloader screen, should say Unlocked.
The problem youre describing sound like when you try to boot after successfully flashing a ROM but forgot to or the kernel failed to flash with it. Only happens when ROM and kernel are mismatched enough that it wont boot, fex flashing CM9 and still on HTC original kernel. Try flashing the kernel from the ROM zip file with
Code:
fastboot flash boot boot.img
You can also try booting a recovery without installing it,
Code:
fastboot boot nameofrecoveryfile.img

frdd said:
Which recoveries have you tried, and what version of phone do you have (S3 or S4). These must match.
Make sure you bootloader unlocked OK, check in bootloader screen, should say Unlocked.
The problem youre describing sound like when you try to boot after successfully flashing a ROM but forgot to or the kernel failed to flash with it. Only happens when ROM and kernel are mismatched enough that it wont boot, fex flashing CM9 and still on HTC original kernel. Try flashing the kernel from the ROM zip file with
Code:
fastboot flash boot boot.img
You can also try booting a recovery without installing it,
Code:
fastboot boot nameofrecoveryfile.img
Click to expand...
Click to collapse
nope, until now i did only unlock for my phone. and i have no idea with version i have, how do i check it?

Snow201 said:
nope, until now i did only unlock for my phone. and i have no idea with version i have, how do i check it?
Click to expand...
Click to collapse
If you have working ADB and fastboot working (there is a sticky by user fibsib that explains this) you can make sure your phone isnt really just trying to boot the OS and failing rather than trying to enter recovery with the command
Code:
adb reboot recovery
But anyways figure out which version you have before doing anything more, flash the wrong stuff and you could break stuff. There are good info here as to how to see if you have the Ville=Z520e=S4 processor model or the Ville C2/Z560e/S3 processor model.
Then download a recovery for your phone model and install it with this command from your computer
Code:
fastboot flash recovery nameofrecoveryyoudownloaded.img
Should work.

have you actually flashed a recovery yet?
which one and how did you do it?

Make sure you have your phone updated to the latest software version before you root. Download system update OTA and click update.
Otherwise you will have issues.
I am rooted T-Mobile phone with original software 1.54 and still can not do recovery or update, it is probably me but it is difficult.
If you are in the US, make sure you use the US version in the development section after you upgrade your phone. Update then try to root it might be easier.

[Q] HTC Sensation Continuous Bootloop

Unlocked
Pyramid PVT Ship S-ON RL
HBOOT-1.27.0000
eMMc-boot
I installed the new viper 1.41 rom and then tried to flash one of the kernals. It said it was all done but then now I'm stuck in a continuous bootloop.
I can boot into recovery and have tried to flash another rom already but it stays in bootloop, also tried flashing different kernal and still doesn't work.
Tried to start from the beginning using cmd etc (adb etc) but cmd can't find a device when using the command adb devices.
What should I do? Please help !!1

mattyon9 said:
Unlocked
Pyramid PVT Ship S-ON RL
HBOOT-1.27.0000
eMMc-boot
I installed the new viper 1.41 rom and then tried to flash one of the kernals. It said it was all done but then now I'm stuck in a continuous bootloop.
I can boot into recovery and have tried to flash another rom already but it stays in bootloop, also tried flashing different kernal and still doesn't work.
Tried to start from the beginning using cmd etc (adb etc) but cmd can't find a device when using the command adb devices.
What should I do? Please help !!1
Click to expand...
Click to collapse
Hi,
Do you have 4EXT recovery installed?
If so ,enable smartflash.

malybru said:
Hi,
Do you have 4EXT recovery installed?
If so ,enable smartflash.
Click to expand...
Click to collapse
"Download 4EXT recovery (1.0.0.5!)" I have this on installed and smartflash is already enabled via recovery.

mattyon9 said:
"Download 4EXT recovery (1.0.0.5!)" I have this on installed and smartflash is already enabled via recovery.
Click to expand...
Click to collapse
Hi,
Unless you have it permanently enabled,you must enable it just before you flash anything.

malybru said:
Hi,
Unless you have it permanently enabled,you must enable it just before you flash anything.
Click to expand...
Click to collapse
Again I've already set smartflash before every flashing of roms. Just this time I'm stuck in a bootloop and can't do nothing about it?

mattyon9 said:
Again I've already set smartflash before every flashing of roms. Just this time I'm stuck in a bootloop and can't do nothing about it?
Click to expand...
Click to collapse
Hi,
Have you got a nandroid you can restore?

malybru said:
Hi,
Have you got a nandroid you can restore?
Click to expand...
Click to collapse
Unfortunately not

Also stuck in the same boat
Hi!
I too am stuck in a bootloop trying to flash CM10.
The problem is I thought I needed CWM to flash the firmware and am now stuck with the CM10 logo when I try and reboot the phone.
Doing more reading 4ext seems to be required to fully wipe the phone rather than CWM
I've found PG58IMG.zip which is recognised when I boot into recovery, but not apparently installed. Perhaps not surprisingly CWM won't install the zip.
Does anyone have any ideas what I can do to the installation?
Thanks
Kevin

mattyon9 said:
Unfortunately not
Click to expand...
Click to collapse
Hi,
You might therefore consider a RUU
Look HERE
---------- Post added at 06:43 PM ---------- Previous post was at 06:39 PM ----------
StockportGerbil said:
Hi!
I too am stuck in a bootloop trying to flash CM10.
The problem is I thought I needed CWM to flash the firmware and am now stuck with the CM10 logo when I try and reboot the phone.
Doing more reading 4ext seems to be required to fully wipe the phone rather than CWM
I've found PG58IMG.zip which is recognised when I boot into recovery, but not apparently installed. Perhaps not surprisingly CWM won't install the zip.
Does anyone have any ideas what I can do to the installation?
Thanks
Kevin
Click to expand...
Click to collapse
Hi,
Firmware is not dependent on a particular recovery.
4 EXT is a better choice ,because it gives you more options.
What PG58IMG.zip were you trying to flash?
S-on/off?
hboot?
radio?
ROM?
Kernel?
etc
etc
etc
More information is required...

Getting past the bootloop
After my plea for help yesterday regarding the bootloop after I had tried to update my HTC Sensation, I eventually found the answer to my problem. Also the response I had yesterday raised some questions which I note at the end
.
Firstly I was trying to update my stock firmware HTC Sensation to CM10; the build I was using was the AOKP / Kang build by bruce2728 dated 16th November as that seemed to be being actively maintained and the functionality I required was reportedly working fine. I read the rather cursory instructions and given I’ve updated several Android tablets before I thought this will be easy. FAIL!
I’ll document elsewhere the process I followed, however the problem I had was when I tried to apply the CM10 image using CWM. It seemed to write successfully but when I came to reboot the phone it was stuck in a boot loop with the cyanogenmod logo stuck on the screen until I pulled the battery out. I couldn’t install 4ext using the play store app as I’d trashed the android installation.
I eventually replace CWM with 4ext by downloading the correct recovery image to my PC (from the third post of http://forum.xda-developers.com/showthread.php?t=1666401, note that the recovery image is different for different phones and possibly operator.)
I then started the phone in bootloader (noting the phone was S-ON), plugged in the USB connection and pressed the power button, so fastboot was selected and then Fastboot usb was displayed on the phone.
From a command prompt on the PC after changing to the directory where I had placed fastboot and adb I typed “fastboot recovery recovery.img” and this replaced CWM with 4ext.
After rebooting the phone and getting back into the bootloader, I selected recovery. This time 4ext started. Before writing the new Android image I wiped user data and (I think it was in tools once you scrolled to the bottom) selected “enable 4ext superflash” before flashing the ROM and Google Apps and then successfully rebooting the phone. For reference the phone took less than 5 minutes to start up.
I now think my problem was trying to flash the ROM with S-ON and not using 4-ext superflash. Oh well
Following on from the response from malybru (Thanks)
Does writing a new rom change the radio? I’d understood it remained the same unless you made special efforts to change it and you were likely to wipe out the phone?
Thanks again
Kevin

maybe i am wrong but radio can be changed only when you are flashing different firmware and to do that you have to be S-OFF

StockportGerbil said:
After my plea for help yesterday regarding the bootloop after I had tried to update my HTC Sensation, I eventually found the answer to my problem. Also the response I had yesterday raised some questions which I note at the end
.
Firstly I was trying to update my stock firmware HTC Sensation to CM10; the build I was using was the AOKP / Kang build by bruce2728 dated 16th November as that seemed to be being actively maintained and the functionality I required was reportedly working fine. I read the rather cursory instructions and given I’ve updated several Android tablets before I thought this will be easy. FAIL!
I’ll document elsewhere the process I followed, however the problem I had was when I tried to apply the CM10 image using CWM. It seemed to write successfully but when I came to reboot the phone it was stuck in a boot loop with the cyanogenmod logo stuck on the screen until I pulled the battery out. I couldn’t install 4ext using the play store app as I’d trashed the android installation.
I eventually replace CWM with 4ext by downloading the correct recovery image to my PC (from the third post of http://forum.xda-developers.com/showthread.php?t=1666401, note that the recovery image is different for different phones and possibly operator.)
I then started the phone in bootloader (noting the phone was S-ON), plugged in the USB connection and pressed the power button, so fastboot was selected and then Fastboot usb was displayed on the phone.
From a command prompt on the PC after changing to the directory where I had placed fastboot and adb I typed “fastboot recovery recovery.img” and this replaced CWM with 4ext.
After rebooting the phone and getting back into the bootloader, I selected recovery. This time 4ext started. Before writing the new Android image I wiped user data and (I think it was in tools once you scrolled to the bottom) selected “enable 4ext superflash” before flashing the ROM and Google Apps and then successfully rebooting the phone. For reference the phone took less than 5 minutes to start up.
I now think my problem was trying to flash the ROM with S-ON and not using 4-ext superflash. Oh well
Following on from the response from malybru (Thanks)
Does writing a new rom change the radio? I’d understood it remained the same unless you made special efforts to change it and you were likely to wipe out the phone?
Thanks again
Kevin
Click to expand...
Click to collapse
Hi,
Flashing a ROM does NOT change the radio.
In fact,you cannot change the radio or firmware if you are s-on.
"Smartflash" is what I would have suggested if you had 4 EXT recovery and s-on.
It is all well documented HERE

malybru said:
Hi,
Flashing a ROM does NOT change the radio.
In fact,you cannot change the radio or firmware if you are s-on.
"Smartflash" is what I would have suggested if you had 4 EXT recovery and s-on.
It is all well documented HERE
Click to expand...
Click to collapse
Hi!
I think I read everything except that guide yesterday - thanks it is interesting.
Regards
Kevin

Need Help:can't flash any recovery,RUU doesn't restore my soft,One S- no OS

Hi, everything messed up from using the stupid TWRP 2.6.0.0 .... I was going to flash a custom rom , but it didn't let me, so I did a little research that I need 2.3.3.0 in order to instal any custom rom.So I tried to switch to 2.3.3.0 but it didn't let me... after that I tried to push stock recovery and now i'm stuck at the white HTC Entering Recovery ( pink letters) screen, ( The recovery just doesn't load) ... I just want to finish with this , and go back to my stock htc rom with not roots or anything.. im tired of this seriously.....
When I try to run RUU I get stuck at the Black HTC Letters screen , the the setup stops and says that it will try to repair my phone, sadly with no result every time.. I think that I don't have any OS on my phone right now, because when RUU starts it shows :
Change image version from : ( blank space)
To: ..... bla bla bla , ( the version of the ruu) ...
I have no problems with entering fastboot and unlocking/relocking my Hboot.
Any help about restoringmy phone will be appreciated . Thanks , I'm online all the time so if I get any responses I'll answer quick.
P.S. I can't mount my usb storage from anywhere, and it doesn't show up on my PC when i connect the usb

looperman said:
Hi, everything messed up from using the stupid TWRP 2.6.0.0 .... I was going to flash a custom rom , but it didn........................
P.S. I can't mount my usb storage from anywhere, and it doesn't show up on my PC when i connect the usb
Click to expand...
Click to collapse
Don't lose hope, don't panic.
Tell me which RUU did you use?
Also, what is your CID?
How did you flash your recovery ?
Sent from my HTC One S using Tapatalk 4 Beta

khan.orak said:
Don't lose hope, don't panic.
Tell me which RUU did you use?
Also, what is your CID?
How did you flash your recovery ?
Sent from my HTC One S using Tapatalk 4 Beta
Click to expand...
Click to collapse
well I think that it doesn't really matter which RUU I "used" because it doesn't even get me in the process of installing...
still , tried these two:
RUU_VILLEC2_U_ICS_40_S_HTC_Europe_2.15.401.100_Radio_16.21.20.02U_16.09.20.11_M2_release_286571_signed
RUU_Ville_U_ICS_40_S_HTC_Europe_2.21.401.10_Radio_1.06s.50.02.27_2_10.08.50.04L__release_271119_signed
I flashed all recoveries with ONE S all in one tool kit,
first i was with TWRP 2.5 i think , then i flashed 2.6, and 2.3.3.... now I flashed the stock recovery , still stuck...

looperman said:
well I think that it doesn't really matter which RUU I "used" because it doesn't even get me in the process of installing...
still , tried these two:
RUU_VILLEC2_U_ICS_40_S_HTC_Europe_2.15.401.100_Rad io_16.21.20.02U_16.09.20.11_M2_release_286571_sign ed
RUU_Ville_U_ICS_40_S_HTC_Europe_2.21.401.10_Radio_ 1.06s.50.02.27_2_10.08.50.04L__release_271119_sign ed
I flashed all recoveries with ONE S all in one tool kit,
first i was with TWRP 2.5 i think , then i flashed 2.6, and 2.3.3.... now I flashed the stock recovery , still stuck...
Click to expand...
Click to collapse
If you downloaded RUUs from androidruu, then it's a case of bad RUU.
Sent from my HTC One S using Tapatalk 4 Beta

khan.orak said:
If you downloaded RUUs from androidruu, then it's a case of bad RUU.
Sent from my HTC One S using Tapatalk 4 Beta
Click to expand...
Click to collapse
well what am I supposed to do ?

looperman said:
well I think that it doesn't really matter which RUU I "used" because it doesn't even get me in the process of installing...
still , tried these two:
RUU_VILLEC2_U_ICS_40_S_HTC_Europe_2.15.401.100_Radio_16.21.20.02U_16.09.20.11_M2_release_286571_signed
RUU_Ville_U_ICS_40_S_HTC_Europe_2.21.401.10_Radio_1.06s.50.02.27_2_10.08.50.04L__release_271119_signed
I flashed all recoveries with ONE S all in one tool kit,
first i was with TWRP 2.5 i think , then i flashed 2.6, and 2.3.3.... now I flashed the stock recovery , still stuck...
Click to expand...
Click to collapse
Okay, just now I noticed. You used two Different RUUs for two different versions.
The 1st one is for S3/C2 version, the 2nd one is for S4 version.
Use This Thread to download RUU's only for your version (S4 or S3 whichever you have got). In your case, it does matter which RUU you use.
If you need any help further just ask away.

the thing is that the RUU doesn't get to the process of installing , and I have used those RUU's before....
I need some solution the get to a working recovery and instal some kind of OS because the last time I could get in my recovery it said that I don't have any OS installed...

looperman said:
the thing is that the RUU doesn't get to the process of installing , and I have used those RUU's before....
I need some solution the get to a working recovery and instal some kind of OS because the last time I could get in my recovery it said that I don't have any OS installed...
Click to expand...
Click to collapse
okay you gonna need fastboot for this. What I have been successful with is:
1. Download an RUU (VERSION SPECIFIC!).
2. Go into Bootloader -> Then select FASTBOOT
3. Connect your Phone to PC. It should say Fastboot - USB mode.
4. Run the RUU, it will get you through all the steps.

khan.orak said:
okay you gonna need fastboot for this. What I have been successful with is:
1. Download an RUU (VERSION SPECIFIC!).
2. Go into Bootloader -> Then select FASTBOOT
3. Connect your Phone to PC. It should say Fastboot - USB mode.
4. Run the RUU, it will get you through all the steps.
Click to expand...
Click to collapse
doesn't work as I've told you , it happens with every RUU ... I get the Black screen with white HTC letters...
I think that what RUU does is : it updates the version my software I think it just doesn't place a new software right away( just an update), but as TWRP said I don't have OS installed...

can anyone help me ?

looperman said:
doesn't work as I've told you , it happens with every RUU ... I get the Black screen with white HTC letters...
I think that what RUU does is : it updates the version my software I think it just doesn't place a new software right away( just an update), but as TWRP said I don't have OS installed...
Click to expand...
Click to collapse
Man you're making this difficult. The more I want to help you, the more you become hasty.
RUU doesn't do what you think. It puts New software, updates firmware (hboot, radio, RECOVERY), so yes it is basically a one-stop solution.
Please calm down as panicking won't help.
Tell me your One S version (S3/S4) at least? so that we can move forward in right direction. and also your CID
Tell me what recoveries and RUU you tried. and what errors do you get while you run them.
EDIT: Thanks to @tivofool I forgot to mention that you have to RELOCK your bootloader before running RUU

I'm with S3
I wrote the 2 RUU's I tried to use,
before that i tried TWRP 2.5.0.0,2.3.0.0.,2.6 and finally I flashed factory stock recovery that's it and both my carrier and bl are unlocked
P.S. : Yeah i knew about the relocking but still stuck on black screen with white HTC Letters

looperman said:
I'm with S3
I wrote the 2 RUU's I tried to use,
before that i tried TWRP 2.5.0.0,2.3.0.0.,2.6 and finally I flashed factory stock recovery that's it and both my carrier and bl are unlocked
P.S. : Yeah i knew about the relocking but still stuck on black screen with white HTC Letters
Click to expand...
Click to collapse
Black Screen with HTC is the oem update screen.
Okay do this please and we'll try to see if there's a problem with the HBOOT. Give me this info and We'll reflash HBOOT.
Go to fastboot and connect your phone to PC.
Enter this command from your PC:
Code:
fastboot getvar all
post results here (MINUS IMEI AND SERIAL #)

just a second, I got a working recovery... I mean i can get in it and everything and I can mount the USB Storage too.
What Rom would you recommend ?

looperman said:
just a second, I got a working recovery... I mean i can get in it and everything and I can mount the USB Storage too.
What Rom would you recommend ?
Click to expand...
Click to collapse
That was fast.
I am using Viper ROM and it's very good. Customization and speed.
For a better battery life, BULLETPROOF KERNEL.
Edit: how did you get it to work by the way.

Viper rom is for s4 only isn't it ?

looperman said:
just a second, I got a working recovery... I mean i can get in it and everything and I can mount the USB Storage too.
What Rom would you recommend ?
Click to expand...
Click to collapse
Make sure you flash a S3 Rom (you mentioned having a s3 right?)
Sent from my HTC VLE_U using Tapatalk 2

looperman said:
Viper rom is for s4 only isn't it ?
Click to expand...
Click to collapse
Oh yes sorry.

okay, so ... I'm going to explane everything I did, I hope I'll help some other people too.
I flashed TWRP from One_S_All-In-One_Kit_v4.0 but without luck, then i flash the factory stock recovery, still the phone was letting me into any of these two recoveries, then i decided reflash the same TWRP again and it worked,
First I couldn't mount the storage from the recovery , but it was still showing in "My Computer" , I had only one option and it was to Format the Storage. So I did.. then copied this rom with gapps on it ---> http://forum.xda-developers.com/showthread.php?t=2164406
Fully wiped --> Flash Rom , then Flash Gapps, ---> then I booted in fastboot to boot from CMD the "boot.img" with "fastboot flash boot boot.img" from the Pacman Rom and then I Rebooted the HTC and Done
Huge thanks to @khan.orak
I hope I helped someone with the same ****tyass problem.

looperman said:
okay, so ... I'm going to explane everything I did, I hope I'll help some other people too.
I flashed TWRP from One_S_All-In-One_Kit_v4.0 but without luck, then i flash the factory stock recovery, still the phone was letting me into any of these two recoveries, then i decided reflash the same TWRP again and it worked,
First I couldn't mount the storage from the recovery , but it was still showing in "My Computer" , I had only one option and it was to Format the Storage. So I did.. then copied this rom with gapps on it ---> http://forum.xda-developers.com/showthread.php?t=2164406
Fully wiped --> Flash Rom , then Flash Gapps, ---> then I booted in fastboot to boot from CMD the "boot.img" with "fastboot flash boot boot.img" from the Pacman Rom and then I Rebooted the HTC and Done
Huge thanks to @khan.orak
I hope I helped someone with the same ****tyass problem.
Click to expand...
Click to collapse
Glad it worked for you buddy.

[Q] Working phone, No recovery

Hello everyone,
I recently purchased an HTC One S used. For various reasons, I had to reinstall the stock software the phone came with. I couldn't find the exact matching version on androidRUU.com, and settled for soemthign close. When I boot into recovery, I see a screen saying "this build is only intended for developemnt blah balah", and then the phone reboots again, but into normal mode. I have no way of entering recovery, and therefore can't flash anything.
I've tried installing several different recovery modes, and absolutely NOTHING in this scenario changes. The phone is unlocked, rooted, and S-Off.
Anyone have any idea on how to fix this?
Thanks in advance,
Niko

I don't understand exactly what is the problem. Having no wifi/cell signal or the red text on boot splash screen?
For the first you could try a radio reflash since you said you're S-off. Then you might want to flash a different ROM. It should work if no hardware is broken
For the second you just have to flash a modified hboot that has that red text gone. There's a thread in which you can find this in the Themes section of One S forum. It's called something like "Boot splash screens..." but you'll find the modded hboots in it as well
Oh and to start with , you have to flash first a different recovery cause the stock one doesn't allow you to do any of the above. I would recommend you to flash TWRP 2.8.1.1 or 2.8.1.0
Sent from nowhere over the air...

Rapier said:
I don't understand exactly what is the problem. Having no wifi/cell signal or the red text on boot splash screen?
For the first you could try a radio reflash since you said you're S-off. Then you might want to flash a different ROM. It should work if no hardware is broken
For the second you just have to flash a modified hboot that has that red text gone. There's a thread in which you can find this in the Themes section of One S forum. It's called something like "Boot splash screens..." but you'll find the modded hboots in it as well
Oh and to start with , you have to flash first a different recovery cause the stock one doesn't allow you to do any of the above. I would recommend you to flash TWRP 2.8.1.1 or 2.8.1.0
Sent from nowhere over the air...
Click to expand...
Click to collapse
I was asking about the reboots when entering recovery. I'll edit my post for clarity.
I've already tried flashing the default CWM recovery adn RWRP.
The phone doesn't go into recovery mode, but just restarts as normal.

How do you try to go to recovery?
Sent from nowhere over the air...

Rapier said:
How do you try to go to recovery?
Sent from nowhere over the air...
Click to expand...
Click to collapse
Both from bootloader menu and applications

And you flash recovery from fastboot and doesn't give you an error?
Could you please tell me the exact steps you make for flashing the recovery?
Sent from nowhere over the air...

Rapier said:
And you flash recovery from fastboot and doesn't give you an error?
Sent from nowhere over the air...
Click to expand...
Click to collapse
I just attempted flashing recovery through fastboot.
http://forum.xda-developers.com/showthread.php?t=2781019
I flashed the version compatible with all HBOOT versions. My phone still cant enter recovery and is now eternally rebooting.
Reinstalling RUU.
Edit: actually I think I'll keep my phone like this for now, seeing as I still ahve access to the boot menu, just because I don't wnat to have to unlock and root it again

same problem here
Hello XDA friends, I have exactly the same problem described here, except that I already have S-OFF have CID 1111111 and yet when installing any recovery fastboot more correctly says that ended when I try to enter the recovery cell displays red letters and then restarts and enters Android normally, apparently for some reason can not write to the partition recovery,
any suggestions?

cesargdmi said:
Hello XDA friends, I have exactly the same problem described here, except that I already have S-OFF have CID 1111111 and yet when installing any recovery fastboot more correctly says that ended when I try to enter the recovery cell displays red letters and then restarts and enters Android normally, apparently for some reason can not write to the partition recovery,
any suggestions?
Click to expand...
Click to collapse
I answer myself.
the error was that I was with version 4.0.3 of Android, ran the RUU to 4.1.1 and now everything works fine.
regards