I'm trying to flash my phone with KDZ but it hangs half way through and eventually pops up a box with "upgrade error WParam: 100 LParam: 500.
Phone is "bricked" but I can get it into emergency mode, If I try to start the phone it just freezes on the LG screen.
Anyone know why i'm getting this error and how I can fix it? It's driving me crazy.
Try again...dnt forget to disable lg modem before going further..and also dnt exit from the emergency screen..and dnt do any thing to your nv2 backup
unplug battery and wait for few minute
then plug it back and turn on again
should be work
if not use kdz update again
good luck
are you sure you have the right kdz file?
whats your phone model and can you post the link that you are using?
Thanks guys but it still wont work, it gets probably half way through and gets stuck on: Smart : wParam = 8, IParam = 0....it then seems to restart the phone and the lights on the home, back and search button flash 3 times and the phone gets stuck on the LG logo.
I've been trying to flash it all day with no luck so please help.
sweetnsour said:
are you sure you have the right kdz file?
whats your phone model and can you post the link that you are using?
Click to expand...
Click to collapse
I got the files from here for my optimus one p500 http ://androidforums.com/lg-optimus-one-p500/385003-manually-installing-gingerbread-2-3-3-official-firmware.html
I still can't flash this with KDZ, would it be possible to flash it with ADB?
My computer can only detect the phone in emergency mode.
Please help me guys
Sycksyde said:
I still can't flash this with KDZ, would it be possible to flash it with ADB?
My computer can only detect the phone in emergency mode.
Please help me guys
Click to expand...
Click to collapse
just go through the detials of downgrading ur phone and follow instruction carefully get into emergency mode and flash ur desired stock rom.
leave a pm if any query
http://forum.xda-developers.com/showthread.php?t=1038338
kdz
shhbz said:
just go through the detials of downgrading ur phone and follow instruction carefully get into emergency mode and flash ur desired stock rom.
leave a pm if any query
http://forum.xda-developers.com/showthread.php?t=1038338[/QUOTE
i have been using kdz method ....everything goes fine but in between error comes - WPARAM-100
LPARAM-4010
I AM REALLY STUCK ..NEED HELP
Click to expand...
Click to collapse
Your phone is soft bricked. If you enter in emergency mode don't remove the battery at any cost or else you'll have a perfect, costliest brick in the world! If not try taking it LG service center ( if your phone is not under warranty, they won't charge much for a software issue, In India its around 150INR, 3$ approx)
Sent from my LG-P500 using xda app-developers app
hello
my phone is E612
i used kdz and got error
Wparam 100 Lparam 500
and phone only gone on download mod
shayan4shayan said:
hello
my phone is E612
i used kdz and got error
Wparam 100 Lparam 500
and phone only gone on download mod
Click to expand...
Click to collapse
try here http://forum.xda-developers.com/forumdisplay.php?f=2131
Help me out pls
OnModelDllMsg(OnMsgFromModelDll3GQCT_PDA) delete m_pLGCyonUpdate ...error ..wparam 100 . lparam 6 ..help me out
i am using windows xp .. modem is disabled ..what should i do ..please help ..
yourashik said:
OnModelDllMsg(OnMsgFromModelDll3GQCT_PDA) delete m_pLGCyonUpdate ...error ..wparam 100 . lparam 6 ..help me out
i am using windows xp .. modem is disabled ..what should i do ..please help ..
Click to expand...
Click to collapse
Creating/posting in multiple threads won't get you the results you are looking for. Someone that is able to answer will answer in due time. Be patient
yourashik said:
OnModelDllMsg(OnMsgFromModelDll3GQCT_PDA) delete m_pLGCyonUpdate ...error ..wparam 100 . lparam 6 ..help me out
i am using windows xp .. modem is disabled ..what should i do ..please help ..
Click to expand...
Click to collapse
Whatever you do
Don't remove the DAMN BATTERY
Sent from my GT-I9082 using Tapatalk
http://forum.xda-developers.com/showthread.php?t=2559363 <--- try this.. might help..
guys im having this error on kdz update ive tried disabling the modem and several different KDZ but results are the same
[R&D Test Tools Log File]
20:15:35 : Launching SW update
20:15:35 : Unpacking KDZ
20:15:41 : KDZ file extraced
20:16:33 : Files were extracted.
20:16:33 : LGMobileDL Load.
20:16:33 : Port = -1
20:16:33 : Connecting to phone
20:16:48 : Check Phone mode = 2
20:16:48 : Phone type check.......
20:16:49 : LGMobileDL.DLL Loading....
20:16:49 : _SetAuthMark Fail
20:16:49 : _SetAuthMark Ok : wAuthMark(65535)
20:16:49 : _DetachDLL Call
20:16:49 : _DetachDLL Call End
20:16:49 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\Rovi.wdb
20:16:49 : Param : moduleDir =
20:16:49 : Param : waitTime = 0
20:16:49 : Param : UsbHighSpeed = 1
20:16:49 : Param : PhoneMode = 2
20:16:49 : Param : BinVersion = V20C_KT_ROOT
20:16:49 : Param : AuthMark = 65535
20:16:49 : Call fn_StartUpgrade
20:16:49 : 3GQCT : wParam = 2007, lParam = 0
20:16:49 : 3GQCT : wParam = 13, lParam = 8
20:16:49 : Step Complete : DSP Write
20:16:49 : 3GQCT : wParam = 2008, lParam = 5
20:16:50 : 3GQCT : wParam = 13, lParam = 10
20:16:50 : Step Complete : DSP Write
20:16:52 : 3GQCT : wParam = 20, lParam = 0
20:16:52 : 3GQCT : wParam = 100, lParam = 5000
20:16:52 : Step : Upgrade Error error code = 5000
20:16:52 : ResetStartInfo() Call
20:16:52 : _DetachDLL Call
20:16:52 : _DetachDLL Call End
20:16:52 : FreeLibrary Call
20:16:52 : FreeLibrary Call End
20:16:52 : ResetStartInfo() Call End
20:16:54 : ===FINISHED===
I try to upgrade from lg software while upgrade almost 45℅ after my phone was automatically disconnected from the PC , mesg shows removed cable n battery try to reconnect the phone to PC I did same thing upgrade ing start but no phone shows with PC , even no starting phone also in emergency mode or recovery mode nothing , my phone was totally dead or brick I don't know please help someone what I do ?????
Sent from my Nexus 5 using XDA Free mobile app
Sent from my Nexus 5 using XDA Free mobile app
deoxdna said:
guys im having this error on kdz update ive tried disabling the modem and several different KDZ but results are the same
[R&D Test Tools Log File]
20:15:35 : Launching SW update
20:15:35 : Unpacking KDZ
20:15:41 : KDZ file extraced
20:16:33 : Files were extracted.
20:16:33 : LGMobileDL Load.
20:16:33 : Port = -1
20:16:33 : Connecting to phone
20:16:48 : Check Phone mode = 2
20:16:48 : Phone type check.......
20:16:49 : LGMobileDL.DLL Loading....
20:16:49 : _SetAuthMark Fail
20:16:49 : _SetAuthMark Ok : wAuthMark(65535)
20:16:49 : _DetachDLL Call
20:16:49 : _DetachDLL Call End
20:16:49 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\Rovi.wdb
20:16:49 : Param : moduleDir =
20:16:49 : Param : waitTime = 0
20:16:49 : Param : UsbHighSpeed = 1
20:16:49 : Param : PhoneMode = 2
20:16:49 : Param : BinVersion = V20C_KT_ROOT
20:16:49 : Param : AuthMark = 65535
20:16:49 : Call fn_StartUpgrade
20:16:49 : 3GQCT : wParam = 2007, lParam = 0
20:16:49 : 3GQCT : wParam = 13, lParam = 8
20:16:49 : Step Complete : DSP Write
20:16:49 : 3GQCT : wParam = 2008, lParam = 5
20:16:50 : 3GQCT : wParam = 13, lParam = 10
20:16:50 : Step Complete : DSP Write
20:16:52 : 3GQCT : wParam = 20, lParam = 0
20:16:52 : 3GQCT : wParam = 100, lParam = 5000
20:16:52 : Step : Upgrade Error error code = 5000
20:16:52 : ResetStartInfo() Call
20:16:52 : _DetachDLL Call
20:16:52 : _DetachDLL Call End
20:16:52 : FreeLibrary Call
20:16:52 : FreeLibrary Call End
20:16:52 : ResetStartInfo() Call End
20:16:54 : ===FINISHED===
Click to expand...
Click to collapse
I have same problem, have you solved ?
c.
F200L Same error showing me how to recover my phone ?
i do all the ways but no luck here is log
[R&D Test Tools Log File]
13:28:35 : Launching SW update
13:28:35 : Unpacking KDZ
13:29:05 : KDZ file extraced
13:29:21 : Files were extracted.
13:29:21 : LGMobileDL Load.
13:29:21 : Port = -1
13:29:21 : Connecting to phone
13:29:35 : Check Phone mode = 2
13:29:35 : Phone type check.......
13:29:37 : LGMobileDL.DLL Loading....
13:29:37 : _SetAuthMark Fail
13:29:37 : _SetAuthMark Ok : wAuthMark(65535)
13:29:37 : _DetachDLL Call
13:29:37 : _DetachDLL Call End
13:29:37 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\F200L30f_Develop.wdb
13:29:37 : Param : moduleDir =
13:29:37 : Param : waitTime = 0
13:29:37 : Param : UsbHighSpeed = 1
13:29:37 : Param : PhoneMode = 2
13:29:37 : Param : BinVersion = F200L30F_00
13:29:37 : Param : AuthMark = 65535
13:29:37 : Call fn_StartUpgrade
13:29:55 : 3GQCT : wParam = 13, lParam = 4
13:29:55 : Step Complete : DSP Write
13:30:11 : 3GQCT : wParam = 13, lParam = 5
13:30:11 : Step Complete : DSP Write
13:30:26 : 3GQCT : wParam = 13, lParam = 6
13:30:26 : Step Complete : DSP Write
13:30:41 : 3GQCT : wParam = 13, lParam = 7
13:30:41 : Step Complete : DSP Write
13:30:41 : 3GQCT : wParam = 2007, lParam = 0
13:30:41 : 3GQCT : wParam = 13, lParam = 8
13:30:41 : Step Complete : DSP Write
13:30:41 : 3GQCT : wParam = 2008, lParam = 5
13:30:42 : 3GQCT : wParam = 13, lParam = 10
13:30:42 : Step Complete : DSP Write
13:30:45 : 3GQCT : wParam = 20, lParam = 0
13:30:45 : 3GQCT : wParam = 100, lParam = 5000
13:30:45 : Step : Upgrade Error error code = 5000
13:30:45 : ResetStartInfo() Call
13:30:45 : _DetachDLL Call
13:30:45 : _DetachDLL Call End
13:30:45 : FreeLibrary Call
13:30:45 : FreeLibrary Call End
13:30:45 : ResetStartInfo() Call End
13:30:46 : ===FINISHED===
Click to expand...
Click to collapse
Click to expand...
Click to collapse
hello, recently every time i turn off the phone he doesn't turn on, the emergency mode screen shows up and then i have to pull of the batery and wait about an hour to turn on the phone again. when i try to plug the phone in any computer i can't access the sd card, is like the phone was plugged in and out at the same time... i believe that could be the firmware so i tryed to update him many times that was where my headache begins...
At the first time the KDZ_FW_UPD doesn't recognize the phone after a few trys i've disabled the LG modem drive and this error appeared: Upgrade Error! Wparam: 100 Lparam: 502.
I've tryed the LG mobile updader but i have the same problem in recognize the phone at 30%. i try billion of "How to" search in billion forums i've done all the steps carefully installed the drive, pull out the battery and put it back, reboot system, plug/unplug the phone billions and billions of times and nothing...
Sorry for the long post and the bad baaaaaaaad english but someone can help me?
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Moving to Q&A
anyone???? =S
well i'll try again, i'm pretty sure that someone here can help me...
i've tryed other ROMS to and i have the same upgrade error: Wparam 100 Lparam 502
here is the LOG file:
[R&D Test Tools Log File]
15:27:12 : Launching SW update
15:27:12 : Unpacking KDZ
15:27:13 : KDZ file extraced
15:27:13 : Files were extracted.
15:27:13 : LGMobileDL Load.
15:27:13 : Port = -1
15:27:13 : Connecting to phone
15:27:23 : Check Phone mode = 1
15:27:40 : Phone type check.......
15:27:45 : LGMobileDL.DLL Loading....
15:27:45 : _SetAuthMark Fail
15:27:45 : AuthMark°¡ Á¤È®È÷ Phone¿¡ Write µÇÁö ¾Ê¾Ò½À´Ï´Ù!
15:27:45 : _SetAuthMark Fail
15:27:45 : LoadCDMAPhoneData() Error
15:27:45 : _DetachDLL Call
15:27:45 : _DetachDLL Call End
15:27:45 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\DZ_LGP350AT-01-V10g-214-01-SEP-22-2011+0.dz
15:27:45 : Param : moduleDir =
15:27:45 : Param : waitTime = 1
15:27:45 : Param : UsbHighSpeed = 1
15:27:45 : Param : PhoneMode = 1
15:27:45 : Param : BinVersion = V10G_00
15:27:45 : Param : AuthMark = 0
15:27:45 : Call fn_StartUpgrade
15:27:50 : Smart : wParam = 100, lParam = 502
15:27:50 : Step : Upgrade Error error code = 502
15:27:50 : ResetStartInfo() Call
15:27:50 : _DetachDLL Call
15:27:50 : _DetachDLL Call End
15:27:50 : FreeLibrary Call
15:27:50 : FreeLibrary Call End
15:27:50 : ResetStartInfo() Call End
15:27:51 : ===FINISHED===
15:29:50 : OnModelDllMsg(OnMsgFromModelDll3GQCT_PDA) delete m_pLGCyonUpdate
Someone please can help me?????????????
P.S.: i've installed the custom recovery by the fastboot mode.... can i upgrade the firmware by the custom recovery mode???
Hello sir , I have a LG GW620 with following details:-
Android version : 2.2
Kernel Version :2.6.32.9
Build Number :Froyo.v20d
Software Version:GW620-V20D
I want to update my GW620 to Gingerbread but first and most problem is
that I am unable to boot my mobile in fastboot mode while a have tried
” Menu + Space / Down Vol Key + Space + Camera Key /Middle Button +
Camera Key ”etc but I am failed . Please suggest me with all possible
steps .GW620 comes with 1.5 and I upgraded it to 2.2 Froyo using KDZ
Updater .
Please Help Me.
I think that we have not a rom with fastboot .After that I was trying
cyanogenroms
downgrade/lggw620dwn900.rar, file
to downgrade our GW620 using KDZ Updater but it says
[R&D Test Tools Log File]
20:53:00 : Launching SW update
20:53:00 : Unpacking KDZ
20:53:01 : KDZ file extraced
20:53:02 : Files were extracted.
20:53:02 : LGMobileDL Load.
20:53:02 : Port = 36
20:53:02 : Connecting to phone
20:53:12 : Check Phone mode = 1
20:53:31 : Phone type check.......
20:53:31 : LGMobileDL.DLL Loading....
20:53:32 : _SetAuthMark Ok : wAuthMark(30573)
20:53:32 : _DetachDLL Call
20:53:32 : _DetachDLL Call End
20:53:32 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\GW620AT-00-
V10g-EUY-XX-DEC-30-2009+0.dz
20:53:32 : Param : moduleDir =
20:53:32 : Param : waitTime = 0
20:53:32 : Param : UsbHighSpeed = 1
20:53:32 : Param : PhoneMode = 1
20:53:32 : Param : BinVersion = V10G_00
20:53:32 : Param : AuthMark = 30573
20:53:32 : Call fn_StartUpgrade
20:53:41 : 3GQCT : wParam = 4, lParam = 0
20:53:41 : Step Complete : DLOAD Change
20:54:21 : 3GQCT : wParam = 3, lParam = 0
20:54:21 : Step Complete : C Drive Erase
20:54:21 : 3GQCT : wParam = 205, lParam = 0
20:54:21 : 3GQCT : wParam = 100, lParam = 4008
20:54:21 : Step : Upgrade Error error code = 4008
20:54:21 : ResetStartInfo() Call
20:54:21 : _DetachDLL Call
20:54:21 : _DetachDLL Call End
20:54:21 : FreeLibrary Call
20:54:21 : FreeLibrary Call End
20:54:21 : ResetStartInfo() Call End
20:54:22 : ===FINISHED===
and phone is restarting automatically on that stage.
I have also checked it with LG-Utils-kp500_ks360 provided in
cyanogenroms Tools section but the same error also occuring in 4%
of total task.
Please suggest me some option that by which ways we can upgrade my
GW620 to Gingerbread.
I will very graceful for your help.
Sorry for my bad english because its not my mother language
Hi All,
I have a GW620 wich I want to upgrade to 2.3
Problem is, somehow I can't downgrade my firmware. It's stuck.
Am using Windows 7 Home Premium x32 and all the apps I use I open it with Administrator privileges..
Also have .net 3.5 and xsxml 4.0 (or something like that, don't know the exact name anymore)
Can't enable root permission via the hidden menu, and all fastboot combinations I have tried fail (and i've tried it really MANY times at all possible timings).
I can get ADB to work and boot to emergency mode but that still won't do.
A full factory reset doesn't help either..
I have the V20D_00 firmware. Is it completely locked or something? Anyone can help me wit this one?
Here more details about the phone:
Model Number:
LG-GW620
Android Version:
2.2
Kernel Version:
2.6.32.9
[email protected])
#1 PREEMPT Tue Jan 4 11:44:31 EST 2011
Build Number:
Froyo.v20d
Software Version:
GW620-V20d
Click to expand...
Click to collapse
and the error log if I try to install it without root permissions or without fastboot:
22:11:22 : Launching SW update
22:11:22 : Unpacking KDZ
22:11:26 : KDZ file extraced
22:11:26 : Files were extracted.
22:11:26 : LGMobileDL Load.
22:11:26 : Port = 4
22:11:26 : Connecting to phone
22:11:36 : Check Phone mode = 1
22:11:54 : Phone type check.......
22:11:54 : LGMobileDL.DLL Loading....
22:11:54 : _SetAuthMark Ok : wAuthMark(6801)
22:11:54 : _DetachDLL Call
22:11:54 : _DetachDLL Call End
22:11:54 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\GW620AT-00-V10g-EUY-XX-DEC-30-2009+0.dz
22:11:54 : Param : moduleDir =
22:11:54 : Param : waitTime = 0
22:11:54 : Param : UsbHighSpeed = 1
22:11:54 : Param : PhoneMode = 1
22:11:54 : Param : BinVersion = V10G_00
22:11:54 : Param : AuthMark = 6801
22:11:54 : Call fn_StartUpgrade
22:11:59 : 3GQCT : wParam = 4, lParam = 0
22:11:59 : Step Complete : DLOAD Change
22:12:39 : 3GQCT : wParam = 3, lParam = 0
22:12:39 : Step Complete : C Drive Erase
22:12:39 : 3GQCT : wParam = 205, lParam = 0
22:12:40 : 3GQCT : wParam = 100, lParam = 4008
22:12:40 : Step : Upgrade Error error code = 4008
22:12:40 : ResetStartInfo() Call
22:12:40 : _DetachDLL Call
22:12:40 : _DetachDLL Call End
22:12:40 : FreeLibrary Call
22:12:40 : FreeLibrary Call End
22:12:40 : ResetStartInfo() Call End
22:12:40 : ===FINISHED===
Click to expand...
Click to collapse
Got it working now.
Found a version v20d_00 with fastboot, and that version did install without a problem.
For future readers I have uploaded the kdz. Also found a version for v20g_00 so uploaded that one also. Have tested them both and they are working.
V20D_00_Fastboot
V20G_00_Fastboot
Hi everyone! I need your help.
I tried to make a downgrade for my P500 from 2.3.3. to 2.2.2(with V10D_00.kdz). I used KDZ_FW_UPD this.
First time i get an error on finish of proccess.
Second try i take a message in log:
Code:
13:47:10 : PHONE IS NOT FOUND!!!
After all i have a permanent [Emergency Mode] on startup.
What i'm done:
- Turn off Firewall and antivirus
- Use different USB ports
- Run KDZ_FW_UPD with admin rights.
- Download and install latest USB and other LG Drivers
- Tried to make it on XP, WIN7, Win8.
- On different PC.
- Turned OFF LG Virtual USB modem - the same.
First try log:
Code:
00:24:18 : Запуск обновления ПО
00:24:18 : Распаковка KDZ
00:25:06 : KDZ файл распакован
00:25:08 : Файлы извлечены .
00:25:08 : LGMobileDL Load.
00:25:08 : Порт = -1
00:25:08 : Соединение с телефоном
00:25:18 : Check Phone mode = 1
00:25:36 : Phone type check.......
00:25:41 : LGMobileDL.DLL Loading....
00:25:41 : _SetAuthMark Fail
00:25:41 : AuthMark°Ў Б¤И®Ич PhoneїЎ Write µЗБц ѕКѕТЅАґПґЩ!
00:25:41 : _SetAuthMark Fail
00:25:41 : LoadCDMAPhoneData() Error
00:25:41 : _DetachDLL Call
00:25:41 : _DetachDLL Call End
00:25:41 : Param : Path = C:\ProgramData\LGMOBILEAX\Phone\LGP698AT-00-V10d-CIS-XXX-MAY-17-2012+0.dz
00:25:41 : Param : moduleDir =
00:25:41 : Param : waitTime = 0
00:25:41 : Param : UsbHighSpeed = 1
00:25:41 : Param : PhoneMode = 1
00:25:41 : Param : BinVersion = V10D_00
00:25:41 : Param : AuthMark = 0
00:25:41 : Call fn_StartUpgrade
00:26:32 : Smart : wParam = 4, lParam = 0
00:27:23 : Smart : wParam = 15, lParam = 0
00:27:23 : Smart : wParam = 205, lParam = 0
00:27:23 : Smart : wParam = 100, lParam = 4008
00:27:23 : Step : Upgrade Error error code = 4008
00:27:23 : ResetStartInfo() Call
00:27:23 : _DetachDLL Call
00:27:23 : _DetachDLL Call End
00:27:23 : FreeLibrary Call
00:27:23 : FreeLibrary Call End
00:27:23 : ResetStartInfo() Call End
00:27:24 : ===ЗАВЕРШЕНО===
00:29:21 : OnModelDllMsg(OnMsgFromModelDll3GQCT_PDA) delete m_pLGCyonUpdate
I don't know what to do to bring back my phone in normal status.
May be you can help me?
P.S. Sorry for my English.
This article should help you out: http://www.ijailbroken.com/how-to-fix-emergency-mode-loop-on-lg-p500-optimus-one/