Hey,
I open this thread to see if anyone can help me with my problem... Weeks ago I installed the gm007 ROM, MIUI v10.
Today I wanted to return to a stock ROM, so I downloaded an official (I9003XXKPQ) and I have installed it with Odin3 v1.83 (my i9003 in Download Mode, put the MD5 file on PDA at Odin and click to Start ) I installed it (or seems like it) but then when the mobile starts for the first time I have left in a loop in the boot of Samsung.
Someone could help me? Now my mobile is unusable..
Remember KPQ needs first flash KPE twice,
Sent from my GT-I9003 using XDA
good guide on flashing XXKPQ
read carefully
http://forum.xda-developers.com/showthread.php?t=1133787
Had Similar Issue
I had similar problem a few weeks back when i was doing a cwm restore back to kpq..
Try booting into recovery mode.. the problem with my device was that it could not access the internal sd card.. i googled around but found no solution other than taking it to the service centre.. there they replaced my mother board(in warranty) and what i got back was a 14gb internal sd..
Just remember to put the stock rom back in(any 1) and unroot..
leerick said:
Hey,
I open this thread to see if anyone can help me with my problem... Weeks ago I installed the gm007 ROM, MIUI v10.
Today I wanted to return to a stock ROM, so I downloaded an official (I9003XXKPQ) and I have installed it with Odin3 v1.83 (my i9003 in Download Mode, put the MD5 file on PDA at Odin and click to Start ) I installed it (or seems like it) but then when the mobile starts for the first time I have left in a loop in the boot of Samsung.
Someone could help me? Now my mobile is unusable..
Click to expand...
Click to collapse
Just flash XXKPE once and then XXKPQ. You are good to go.
flash XXKPE first as a base for XXKPQ
Sent from my GT-I9003 using XDA
i alwys do this..and it works for me..after u flash any GB using odin,the phone reboot n alwys stay with samsung logo..,try pull out ur bttry back,switch to recovery mod..wipe chace,wipe all user data..then reboot back..hope it works for u to..sory if i'm wrong..im a new bie.. cheers
Related
So I was trying to uninstall the OCLF V1+ from my I9003. I was looking around the forum, then I found out that I had to delete a file in system/bin playlogo and reboot after that go back into OCLF and hit restore boot animation and I will be able to remove the lag fix. I removed playlogo from system/bin. Unfortunately, when I was rebooting my phone, it kept looping at the Samsung logo and would not go into the lock screen like how it does every time I reboot it.
Note: I am still able to go into clockworkmod(CWM) recovery and download mode.
Please help me! This the the first android phone I have and will probably be the only one that I can afford.
Help will be very much appreciated. Any other tips will also be appreciated. Thanks.
Do u have back of os with help of CWM??? If not then u have to reflash with ur stock rom.
jjangjojo said:
So I was trying to uninstall the OCLF V1+ from my I9003. I was looking around the forum, then I found out that I had to delete a file in system/bin playlogo and reboot after that go back into OCLF and hit restore boot animation and I will be able to remove the lag fix. I removed playlogo from system/bin. Unfortunately, when I was rebooting my phone, it kept looping at the Samsung logo and would not go into the lock screen like how it does every time I reboot it.
Note: I am still able to go into clockworkmod(CWM) recovery and download mode.
Please help me! This the the first android phone I have and will probably be the only one that I can afford.
Help will be very much appreciated. Any other tips will also be appreciated. Thanks.
Click to expand...
Click to collapse
Dont worry dude.. Its no biggie.. Just like vishal said if you have backed uo your firmware tgen u can restore it through cwm.. If not you can always reflash it.. Search the forum for flashing i9003..
do not use the restore boot animation in oclf.. The paylogos it will restore is for i9000 not for i9003..
Sent from my GT-I9003 using XDA Premium App
jjangjojo said:
So I was trying to uninstall the OCLF V1+ from my I9003. I was looking around the forum, then I found out that I had to delete a file in system/bin playlogo and reboot after that go back into OCLF and hit restore boot animation and I will be able to remove the lag fix. I removed playlogo from system/bin. Unfortunately, when I was rebooting my phone, it kept looping at the Samsung logo and would not go into the lock screen like how it does every time I reboot it.
Note: I am still able to go into clockworkmod(CWM) recovery and download mode.
Please help me! This the the first android phone I have and will probably be the only one that I can afford.
Help will be very much appreciated. Any other tips will also be appreciated. Thanks.
Click to expand...
Click to collapse
its not difficult do a nandroid restore or flash with ODIN.
u can also try clearing cache..
I did backup in the external sd card but when they said backup completed, I rebooted into my phone and saw that my external sd card has totally no free space at all, I was afraid that the backup was not complete and that they said backup complete only because there is no more free space on the external sd card.
So can I use the backup?
jjangjojo said:
I did backup in the external sd card but when they said backup completed, I rebooted into my phone and saw that my external sd card has totally no free space at all, I was afraid that the backup was not complete and that they said backup complete only because there is no more free space on the external sd card.
So can I use the backup?
Click to expand...
Click to collapse
Try to use the restore option.. It will automatically lead you to a folder that contains the backup.. If not it will say no files..
Sent from my GT-I9003 using XDA Premium App
What I mean is that the backup I did was not complete. Maybe it was just 3/4 complete then due to the lack of space in external sd card it was not complete.
Thanks for your quick reply.
jjangjojo said:
What I mean is that the backup I did was not complete. Maybe it was just 3/4 complete then due to the lack of space in external sd card it was not complete.
Thanks for your quick reply.
Click to expand...
Click to collapse
Hmmm.. You should just flash your phone to your stock firmware(if you remember) or to other firmwares I.e xxkb3 w/c is widely used here
Sent from my GT-I9003 using XDA Premium App
Which firmware is the best for our phone. And i downloaded the firmware for my phone but it only has one file. how do i flash it with odin then? the fw version is dxkb2, if i am not wrong.
jjangjojo said:
Which firmware is the best for our phone. And i downloaded the firmware for my phone but it only has one file. how do i flash it with odin then? the fw version is dxkb2, if i am not wrong.
Click to expand...
Click to collapse
Many of us used xxkb3 because alot of themes were modified for kb3.. I also have dxkb2 as a stock rom.. Just flash it in pda and dont check repartition.. In other words open odin then select the single file in pda and don't use the latona file.. Make sure you are in download mode..
Sent from my GT-I9003 using XDA Premium App
ephraim033 said:
Many if ys used xxkb3 because alot of themes were modified for kb3.. I also have dxkb2 as a stock rom.. Just flash it in pda and dont check repartition.. In other words open odin then select the single file in pda and don't use the latona file.. Make sure you are in download mode..
Sent from my GT-I9003 using XDA Premium App
Click to expand...
Click to collapse
It's compatible with one another? This is a first Thanks for the info part. I was thinking if i had to reflash to stock incase I had to repair the phone. Least now i know why DXKB2 only had PDA.
Misledz said:
It's compatible with one another? This is a first Thanks for the info part. I was thinking if i had to reflash to stock incase I had to repair the phone. Least now i know why DXKB2 only had PDA.
Click to expand...
Click to collapse
Yes part.. When I sent my phone to service center I flashed to dxkb2 (although they didn't checked it because they only checked for hardware).. When you flash it the pda phone and csc will be changed to your stock dxkb2.. Hope it helped
Edit: part, did u mean that is it compatible if u use dxkb2 as pda and xxkb3 as phone and csc? I think not.. But if you want to flash back to stock dxkb2 you can and the phone pda and csc will be changed to stock even if it has only one file
Sent from my GT-I9003 using XDA Premium App
Thx everyone i have already flashed back to dxkb2. It worked now i just have to redownload my 200++ apps(very tedious). Are there any other tips?? Should I apply lag fix again, will it be of alot of help? Should I also flash cwm? Is the risk of bricking(anytype of malfunction such as soft bricking or boot screen looping etc.) flashing cwm very high?
Thanks guys.
Sent from my GT-I9003 using XDA Premium App
jjangjojo said:
Thx everyone i have already flashed back to dxkb2. It worked now i just have to redownload my 200++ apps(very tedious). Are there any other tips?? Should I apply lag fix again, will it be of alot of help? Should I also flash cwm? Is the risk of bricking(anytype of malfunction such as soft bricking or boot screen looping etc.) flashing cwm very high?
Thanks guys.
Sent from my GT-I9003 using XDA Premium App
Click to expand...
Click to collapse
You should have backed up using TB Then you could have restored all 200 in 1 go
Thanks, but it would also be better if you could provide me with answers to my questions.
Thanks again.
jjangjojo said:
Thanks, but it would also be better if you could provide me with answers to my questions.
Thanks again.
Click to expand...
Click to collapse
Bro not only me but every member will recommend u to flash CWM for high level safety. You can backup whole rom as it is. Even if ur phone gets bricked dont worry bro...with restore option from CWM will restore everything. U will feel that nothing was happened to ur phone.
NEVER use lag fix!!! Its an head ache.
Hope u got ur answer.
U can use titanium backup as mentioned by misledz if u flash your phone then u can restore all as it was previous
Thanks guys.
Sent from my GT-I9003 using XDA Premium App
My stock firmware dxkb2 has only one file as I said before so if I want to change back to stock recovery, what do I do?
Sent from my GT-I9003 using XDA Premium App
jjangjojo said:
My stock firmware dxkb2 has only one file as I said before so if I want to change back to stock recovery, what do I do?
Sent from my GT-I9003 using XDA Premium App
Click to expand...
Click to collapse
Just flash the stock or any tom and you'll get the stock recovery back..
Sent from my GT-I9003 using XDA Premium App
Hi I had odin stuck at setup connection... it was like a few mins so I unplugged then I tried to get into download mode but it said something about kies so i flashed hemidall one click and now im back to stock just wondering why it happened? I don't wanna attempt again without knowing the problem, I had all the files (4) all loaded into odin properly in the right locations why???
i was so scared i thought i bricked my new phone!!
It happened because odin is very finicky... The good thing is long as you're comfortable with the one clicks you can do anything you were attempting with odin
Sent from my SGH-T959V using xda premium
You posted this in the KB5 thread. What were you trying to flash in ODIN?
lumin30 said:
You posted this in the KB5 thread. What were you trying to flash in ODIN?
Click to expand...
Click to collapse
Trying to flash what was suggested in the lighting zap tweak thread which is gb rom and rrying to go back to stock and.then install bhudven kernel then black final then the tweak agqin luymn
Then why did you post this in the KB5 thread?
reddd123 said:
Trying to flash what was suggested in the lighting zap tweak thread which is gb rom and rrying to go back to stock and.then install bhudven kernel then black final then the tweak agqin luymn
Click to expand...
Click to collapse
That seems like a very round about way... Just one click bhud's package with cwm, reboot into recovery, factory reset/wipe/format everything (expect sd card), flash vb-final (per OP), (after the 10 min. soak in) flash lightning
Sent from my SGH-T959V using xda premium
reddd123 said:
Hi I had odin stuck at setup connection... it was like a few mins so I unplugged then I tried to get into download mode but it said something about kies so i flashed hemidall one click and now im back to stock just wondering why it happened? I don't wanna attempt again without knowing the problem, I had all the files (4) all loaded into odin properly in the right locations why???
i was so scared i thought i bricked my new phone!!
Click to expand...
Click to collapse
this is happening to me and i dont understand heimdall...can you please even just tell me how to get to stock...thanks...plwase....thanks in advace...
Do a search for the guide on Heimdall that bassmanjames wrote. It is thoroughly written. Or try again with ODIN.
greetings xda members...
first up, lemme start by telling you the details of my problem... i beg you all for a little bit more understanding for am a noob on this...
i had this tab for about 6 months now, and am loving it everyday since, as soon as ICS came out last July (if am not mistaken) i flashed it with oden and ive been successful and then rooted it aswell without any problem... last week, been wanting to have jellybean aswell, so i decided to try CM 10 by the great AORTH.. used CWM type of recovery to flash it (the one where we press power and volume up together) and just when i thought it is done correctly, i got stucked at CyanogenMod boot... but it never get through it i read alot of threads here and checked all our great members idea how to fix it... someone said, try to flashback stock HC using odin, odin flashing went well, and successful, but im stuck on Samsung Logo Bootloop this time even tried using Heimdall, still nothing still bootlooping...
please please guys... help me... i really wanna fix my tab plus... am starting to miss using it...
zepoy said:
greetings xda members...
first up, lemme start by telling you the details of my problem... i beg you all for a little bit more understanding for am a noob on this...
i had this tab for about 6 months now, and am loving it everyday since, as soon as ICS came out last July (if am not mistaken) i flashed it with oden and ive been successful and then rooted it aswell without any problem... last week, been wanting to have jellybean aswell, so i decided to try CM 10 by the great AORTH.. used CWM type of recovery to flash it (the one where we press power and volume up together) and just when i thought it is done correctly, i got stucked at CyanogenMod boot... but it never get through it i read alot of threads here and checked all our great members idea how to fix it... someone said, try to flashback stock HC using odin, odin flashing went well, and successful, but im stuck on Samsung Logo Bootloop this time even tried using Heimdall, still nothing still bootlooping...
please please guys... help me... i really wanna fix my tab plus... am starting to miss using it...
Click to expand...
Click to collapse
Enter recovery wipe data , If it does not work flash with odin stock rom samsung , and flashed the .pit file for p6200
pit.file p6210 16g
devid801 said:
Enter recovery wipe data , If it does not work flash with odin stock rom samsung , and flashed the .pit file for p6200
pit.file p6210 16g
Click to expand...
Click to collapse
tried them all bro, but no luck... when i was trying to wipe data, my tab automatically reboots and never showed that it was wiped successfully, tried flashing stock roms using odin and using pit file repartition but still no good... even tried heimdall too
i tried to root my samsung galaxy s blaze last night with odin....im stuck on a screen that says firmware upgrade encountered an issue..please select recovery mode in kies..its not that easy...i went through the process of rooting beforehand and it was totally stuck on the screen where it has the little bar that fills up...right after the flying andriod screen...lol...im so lost...can anyone help me out...thanks yo..
Hmm.. if it says that on Odin you're probably on force download mode. So I'd suggest you flash a stock firmware from Sammobile.com. (you'll just flash the PDA file which is in the tar) then you should try rooting again. I'd suggest you follow Erikmms' guide on the dev thread.
(P.S I know you pm'd me sorry for the delay. If you've anymore questions pleases feel free to pm me.
Sent from my SAMSUNG-SGH-T769 using xda app-developers app
Start from 2.3.5 and root via Odin
nmadrid said:
i tried to root my samsung galaxy s blaze last night with odin....im stuck on a screen that says firmware upgrade encountered an issue..please select recovery mode in kies..its not that easy...i went through the process of rooting beforehand and it was totally stuck on the screen where it has the little bar that fills up...right after the flying andriod screen...lol...im so lost...can anyone help me out...thanks yo..
Click to expand...
Click to collapse
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
When installing firmare,rooted kernel and cwm.....dont do it in one visit to odin. Also make sure you dont have autoreboot checked or repartition when flashing the rooted kernel or cwm. :good:
nickmcminn60 said:
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
When installing firmare,rooted kernel and cwm.....dont do it in one visit to odin. Also make sure you dont have autoreboot checked or repartition when flashing the rooted kernel or cwm. :good:
Click to expand...
Click to collapse
Just for my own curiosities sake, why not auto-reboot?
I'd recommend auto reboot. Then you don't have to go through the hassle of manual reboot from Odin.
Sent from my SAMSUNG-SGH-T769 using xda app-developers app
OK so I got here my p6200 rooted and then aceesed my recovery menu then I did a FULL WIPE
after that It reboot it and caused a BOOTLOOP (cant even turn it off keeps restarting so i need to drain it to get it OFF)
and so my problem is I am quite new with reflashing firmwares though i had already flashed firmware using odin with my galaxy y
and now I have hard time finding the Files Needed to reflash my firmware in this p6200
its quite complicated than i thought because one time i downloaded a firmware which is 600mb or so and i found that it has only one file
I remember that I need 4 files ....I think I need those 4 to for me to be able to flash the firmware am I right?
Sorry im pretty new with this
(I can Still access recovery menu and Download mode)
rhazxor said:
OK so I got here my p6200 rooted and then aceesed my recovery menu then I did a FULL WIPE
after that It reboot it and caused a BOOTLOOP (cant even turn it off keeps restarting so i need to drain it to get it OFF)
and so my problem is I am quite new with reflashing firmwares though i had already flashed firmware using odin with my galaxy y
and now I have hard time finding the Files Needed to reflash my firmware in this p6200
its quite complicated than i thought because one time i downloaded a firmware which is 600mb or so and i found that it has only one file
I remember that I need 4 files ....I think I need those 4 to for me to be able to flash the firmware am I right?
Sorry im pretty new with this
(I can Still access recovery menu and Download mode)
Click to expand...
Click to collapse
May i know on what rom did you wipe your tab? If on ICS.. you're on a very BIG trouble..
Sent from my GT-P6200 using XDA Premium HD app
theejay0625 said:
May i know on what rom did you wipe your tab? If on ICS.. you're on a very BIG trouble..
Sent from my GT-P6200 using XDA Premium HD app
Click to expand...
Click to collapse
Well i think.its on honeycomb because i bought it last year and i didnt do any updates
And my android version is 3.+ not 4.+ sorry cant hardly remember it
What will happen IF Im on ics?
Can I still Fix it? Well im on honeycomb
rhazxor said:
What will happen IF Im on ics?
Can I still Fix it? Well im on honeycomb
Click to expand...
Click to collapse
You will brick your tab if you wipe from stock ICS recovery.. good thing your on HC.. usually when i flash HC and got a bootloop.. the solution is wipe cache and wipe partition.. did u try doing that again? Or flash HC again then wipe cache and partion.. wiping from HC doesnt brick your tab.. but im wondering what caused the bootloop
Sent from my GT-P6200 using XDA Premium HD app
theejay0625 said:
You will brick your tab if you wipe from stock ICS recovery.. good thing your on HC.. usually when i flash HC and got a bootloop.. the solution is wipe cache and wipe partition.. did u try doing that again? Or flash HC again then wipe cache and partion.. wiping from HC doesnt brick your tab.. but im wondering what caused the bootloop
Sent from my GT-P6200 using XDA Premium HD app
Click to expand...
Click to collapse
I tried it and now samsung logo keeps Loading and Loading....and so on
How can I flash it?
rhazxor said:
I tried it and now samsung logo keeps Loading and Loading....and so on
How can I flash it?
Click to expand...
Click to collapse
Download your stock HC rom from www.samfirmware.com.. boot to download mode.. open odin on your computer.. connect your tab.. choose the HC file on the PDA section.. then press start..
Sent from my GT-P6200 using XDA Premium HD app
theejay0625 said:
Download your stock HC rom from www.samfirmware.com.. boot to download mode.. open odin on your computer.. connect your tab.. choose the HC file on the PDA section.. then press start..
Sent from my GT-P6200 using XDA Premium HD app
Click to expand...
Click to collapse
Ive downloaded a firmware from that site and this is what i got P6200XXKL7_P6200XXKL7_P6200OXXKL1_HOME.tar.md5
Ok I flashed a firmware and now Im kinda stuck on Bootscreen but it is NOT looping
And now Cant Access Recovery Menu But i can Access Download Mode
rhazxor said:
Ive downloaded a firmware from that site and this is what i got P6200XXKL7_P6200XXKL7_P6200OXXKL1_HOME.tar.md5
Ok I flashed a firmware and now Im kinda stuck on Bootscreen but it is NOT looping
And now Cant Access Recovery Menu But i can Access Download Mode
Click to expand...
Click to collapse
The way to fix that bootloop is to wipe from recovery but you cant access the recovery.. the firmware that you got.. is that your tablet's stock firmware? I mean.. every country has its own firmware.. and every tablet has its own stock firmware.. depending on the country you're in.. when im having that bootloop every time when i flash HC.. especially when i flash HC over ICS ( whenever i do something stupid and got stuck on bootloop ) my way out of the bootloop is wipe from Hc recovery..
Sent from my GT-P6200 using XDA Premium HD app
---------- Post added at 03:22 PM ---------- Previous post was at 03:17 PM ----------
Went to the developement area to ask for help.. hope they will respond..
Sent from my GT-P6200 using XDA Premium HD app
Make sure you have a firmware that includes a ".pit" file.
Check (enable) "rePartition" in Odin when you flash
Make sure that the file you use is for your model and country.
theejay0625 said:
The way to fix that bootloop is to wipe from recovery but you cant access the recovery.. the firmware that you got.. is that your tablet's stock firmware? I mean.. every country has its own firmware.. and every tablet has its own stock firmware.. depending on the country you're in.. when im having that bootloop every time when i flash HC.. especially when i flash HC over ICS ( whenever i do something stupid and got stuck on bootloop ) my way out of the bootloop is wipe from Hc recovery..
Sent from my GT-P6200 using XDA Premium HD app
---------- Post added at 03:22 PM ---------- Previous post was at 03:17 PM ----------
Went to the developement area to ask for help.. hope they will respond..
Sent from my GT-P6200 using XDA Premium HD app
Click to expand...
Click to collapse
I didnt download my country firmware cause im not sure if it is 3.2 or not
I downloaded the one that has 3.2
Where ca i get that Pit file?
rhazxor said:
I didnt download my country firmware cause im not sure if it is 3.2 or not
I downloaded the one that has 3.2
Click to expand...
Click to collapse
Best place to find specific firmware - http://live.samsung-updates.com/index.php?device=GT-P6200. The list is sorted by release date, so look through the entire list for your version and region.
You could possibly have a GT-P6200L or -P6201 (depending on your region/carrier), which you can select in the drop-down list on right side of the page.
I don't know if .pit file is included in the .tar.
SaurusM3 said:
Best place to find specific firmware - http://live.samsung-updates.com/index.php?device=GT-P6200. The list is sorted by release date, so look through the entire list for your version and region.
You could possibly have a GT-P6200L or -P6201 (depending on your region/carrier), which you can select in the drop-down list on right side of the page.
I don't know if .pit file is included in the .tar.
Click to expand...
Click to collapse
Is it Necessary to download your region (country) firmware?
rhazxor said:
Is it Necessary to download your region (country) firmware?
Click to expand...
Click to collapse
Yes it is.. because its your tabs original stock rom
Sent from my GT-P6200 using XDA Premium HD app
theejay0625 said:
Yes it is.. because its your tabs original stock rom
Sent from my GT-P6200 using XDA Premium HD app
Click to expand...
Click to collapse
Ok thank you for Helping me alot
I will now download my stock firmware and ill try flash it
ill just post if something would happen
thanks again to all who helped me :laugh:
I think that im on a big trouble now...my Pc wont Detect The Tab now (it says unrecognize Device) but it knows that the tab is connected to the PC
and when i charge the tab it shows a loading battery sign the one with rotating circle and it just stays like that even if i charge it whole day
it started happening when I tried to flash a different firmware in short i flashed a firmware which is not my stock
The firmware i download was a honeycomb firmware XXXXXXX.tar.md5 file on a zip
and so when i extracted the zip winrar said its corrupted (file size is the same i downloaded it without a pause or anything)
and so i just continue the extraction
and then i tried to flash it with odin and odin said md5 mismatch
SO I removed the md5 on the file so it would be XXXXX.tar
and now PC wont detect tab on Download mode and I cant get into recovery mode
any suggestions?
rhazxor said:
I think that im on a big trouble now...my Pc wont Detect The Tab now (it says unrecognize Device) but it knows that the tab is connected to the PC
and when i charge the tab it shows a loading battery sign the one with rotating circle and it just stays like that even if i charge it whole day
it started happening when I tried to flash a different firmware in short i flashed a firmware which is not my stock
The firmware i download was a honeycomb firmware XXXXXXX.tar.md5 file on a zip
and so when i extracted the zip winrar said its corrupted (file size is the same i downloaded it without a pause or anything)
and so i just continue the extraction
and then i tried to flash it with odin and odin said md5 mismatch
SO I removed the md5 on the file so it would be XXXXX.tar
and now PC wont detect tab on Download mode and I cant get into recovery mode
any suggestions?
Click to expand...
Click to collapse
I have a somewhat similar problem, tried to upgrade my stock rooted ICS to official JB(U.K. version) using Odin3 v3.07, halfway i encountered a FAIL message and now my GT-P6210 is stuck in a screen with a big yellow alert sign and below that a message which says " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." tried using Kies but could not even connect to the tablet, tried accessing recovery but screen is stuck in that big yellow alert sign with the warning. tried turning if off but still stuck. any suggestions?
mikibabs said:
I have a somewhat similar problem, tried to upgrade my stock rooted ICS to official JB(U.K. version) using Odin3 v3.07, halfway i encountered a FAIL message and now my GT-P6210 is stuck in a screen with a big yellow alert sign and below that a message which says " Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again." tried using Kies but could not even connect to the tablet, tried accessing recovery but screen is stuck in that big yellow alert sign with the warning. tried turning if off but still stuck. any suggestions?
Click to expand...
Click to collapse
I'm not expert but from my dealings with Kies its pure crap lol. Though I would make sure to use a rear (not front) usb port and official samsung cable and try again with Odin with the tab in Download mode, if you can.
I think the steps here would apply (ignoring the different key combination for the tab plus and the stuff after the flashing part at the start)
skurys said:
I'm not expert but from my dealings with Kies its pure crap lol. Though I would make sure to use a rear (not front) usb port and official samsung cable and try again with Odin with the tab in Download mode, if you can.
I think the steps here would apply (ignoring the different key combination for the tab plus and the stuff after the flashing part at the start)
Click to expand...
Click to collapse
finally solved the problem, after more tinkering with it, was able to go into download mode again by just pressing again the power button and the volume down button at the same time (funny thing i tried this method earlier but won't go to download mode but after leaving it on the table for an hour and getting back at it, worked fine). while tablet is in download mode, i run odin again and this time i used version 1.85, loaded the official U.K. version JB tar.md5 file, connected the cable and waited for it to be detected (windows did an auto update) and waited for the :id.com tab to light up to yellow color (by default only the auto-reboot and the F.reset was checked) and click start again and everything went fine. now i have jellybean and rooted it with framaroot(no hassle one click rooting process by alephzain, if it does'nt work just uninstall the .apk). my table is now a rooted jellybean