hello!
i have a GoClever Tab T73 tablet and i wanted to instal a new rom by this guide:
http://forum.xda-developers.com/showthread.php?t=1101094&highlight=resistive+touchscreen
i use the Dropad D10 files
i installed ClockworkMod Recovery 5
after the instal it went automaticly to Recovery
and there i instaled the CyanogenMod 7.zip from the sd card
the instalation wentsuccessfully and the Operating system turned on
at first the touchscreen didnt work,but after a couple of seconds the application of the calibration started automatically
and then the Operating system worked fine
but afterwards i accidently turned on the calibration application
and from that moment the touchscreen is not calibrating and im stuck at the "home" screen
i tried to enter the ClockworkMod Recovery 5 to do restore to the old system , but i couldnt managed to get in (maybe because i didnt press the right buttons)
then i tried to flash the ClockworkMod Recovery 5 again through the FWDN but i dont know how to enter to FWDN mode
Thanks in advance for any answers
Maybe try to install Cyanogen.zip again using recovery mode? You may try to wipe data and then install cyanogen again.
Enter recovery using ADB and reboot recovery script, see guide for CWM for Allwinner A10...
Related
Hi Guys,
Ive managed to root my phone, install all the necessary ROM files on my internal SD card.
Unfortunately, i have now bricked my fone and i it either stays on the black screen with the initial "Samsung Galaxy S 19000" in white writing....OR...if i press the 3-button combo it takes me to "Downloading mode"
I followed a link which said to..
Step 4.Put your phone into download mode again and flash the CyanogenMod 7 initial kernel (cm7-galaxys-initial-kernel.tar file from initial CM7 package) to it as PDA without auto-reboot using Odin.
Step 5.Reboot your phone into recovery using three button combination again.
Once i tried to reboot into recovery mode...it wouldnt allow me...it only took me to downloading mode. I think its because i didnt install ClockworkMod Recovery.
I need help with the following possible solutions:
Solution A: Can i flash any ROM ONLY using Odin? At least i can get into the phone and install ClockworkMod Recovery manally.
Solution B: Is there any other way to get into Recovery Mode..so i can just wipe/reset to factory mode?
Solution C: Any other ideas??
Thanks...any help would be appreciated!
i was trying to install cm7 on my phone an after downloading every thing and started the rom manager for recovery reboot it didnt load the same menu for the clockworkmod recovery so i decided to flash it , so after reboot i started the rom manager once again and pressed flash clockworkmod recovery a list of phones appeared but i didnt find my phone so i decided to choose a different model i guess it was a huwaie 2 mini and the process ended properly and cwm is flashed then i pressed recovery reboot after that my phone closed and never started again i tried removing the battery and restart but the phone didnt work at all please help
On the page dedicated to CyanogenMod 7.1 Galaxy http://forum.xda-developers.com/showthread.php?t=1149110 there is a link from where to get CWM. You can install via odin again and everything will be ok.
I installed the ICS update manually and used it for around 2 days and suddenly my power key stops working, and my bootloader is unclocked but the phone was not rooted.
The phone works Fine, everything is working...
then i pulled out the battery to goto recovery mode, and bam, the phone entres recovery mode but the volume kes does nothing, power key does nothing, and the phone is not even detected in recovery mode by my PC at all...
i can't do anything......
please help me out what do i do????
i can still pull out the battery and the phone automatically restarts, without pressing any key and boots normally and as everything works fine...
but i am stuck, i can't use recovery mode nor my power key
Very similar to my problem in this thread here
http://forum.xda-developers.com/showthread.php?p=26578138#post26578138
Your phone is compatible with the clockwork recovery touch?
Edit
Excuse is the nexus s forum, so it is compatible xD
Make the root of your phone with any application in the market and install the recovery ClockworkMod touch with Rom manager premium or Rom toolbox Pro. Restart recovery using Rom manager or Rom toolbox and do a full cleaning on the phone. Wipe only data and cache.
Now, select from mount and storage mount USB storage and copy over to your i9020 storage any rom ( try using the cm9 ). If the installation is successful restart, if not try some other roms. More than that I do not know how to help.
P.s.: In theory it should go smoothly, otherwise I do not assume any liability for further damage to the phone ... Good luck!
Hi all,
I want to install Cyanogen Mod on my TAB 2 GT 5100 and followed the wiki on Cyanogen website for that.. I have a stubborn problem. I use Heimdall on my Ubuntu pc to upload CWR to the rom. This seems to go allright: the Ubuntu terminal says it's succesful and on the tablet the blue bar fills from left to right.
However, de instruction then is to boot directly into recovery from download mode, because the system rom overwrites CWR if you boot the bootloader. Precisely that is happening again and again. It seems impossible to directly boot into recovery coming from download mode, at least manually by pressing the on/off switch and the volume up switch together. Maybe some Android 4.2.2 protection makes this impossible.?
Anyway, I tried to reboot into recovery using adb, but it does't find the device anymore when it is into download mode. From lsusb I can see the usb adres is changed as soon as download mode on the tablet is active but how to instruct adb to find the tablet at the new adress?? That would probably solve the problem.
Please help!
Beginner 108 ( some Linux experience, new to Android)
Hi,
I'm have been trying to update from kit kat to lollipop on my acer liquid e700 phone.The tutorial said that only philz touch should be used else i would run into problems.I have been trying unsuccessfully to install easy magic installer on my mac, but i always get "sorry adb root shell is not working error",despite adb given root access and usb debugging on, and i followed some tutorials about installing and tuning adb and fast boot.Yes! and the phone is rooted.
So now i tried installing philz touch on the phone and i've downloaded the .img file and zip file and tried flashily, and that doesn't work either.When i try to download philz touch within flashily,is says checking then says 'something went wrong, please try again.I flash the .img file and it says flashed completed, do you want to boot into recovery or flash more files.I click boot into recovery, but all i see is a black screen and the phone boots back normally, no recovery.I try it with a zip file, same thing, the screen gets black and the phone reboots, no recovery.I try to boot into recovery manually, and the phone no longer does.When i click volume up to select recovery mode,it just boots up and goes into normal mode, it no longer boots into recovery.
I try rashr and it's another failure.Philz touch doesn't load during installation.
Can someone please help.
Thanks.