Post 1 - Information
Post 2 - Downloads and Release / Change Information
Post 3 - Bugs, Future Additions to the GUI, FAQ
I would like to add for those that like my toolkit, PLEASE DO NOT POST IT ELSEWHERE WITHOUT MY PERMISSION!
I have seen multiple sites who copy and paste my work to their site! If I do not approve of it, then do not do it! it will discourage me from adding updates since it is being used for their own benefits!
tl;dr.
If you post my work without permission, don't expect updates!
I created an easy to use GUI program for the HTC Amaze and I decided to make one for the HTC One S. I spent a good over 10+ hours to learn how to script, watch videos on how to do it, working on it during school when I should have been listening lol and all that fun stuff. I am going to fix it and up and add more updates to it. You CAN place requests and I will try to fulfill it!
If this helped you out, Please press the thanks button and if you want, you can always donate!
FEATURES
- Install HTC Drivers
- Enter Bootloader (after it enters into bootloader, press the power button to enter Fastboot) REMOVED. No longer necessary.
- Get Token ID. Register at HTCDev, login to the site and submit the Token ID here. Buttons have been replaced and include links.
- Unlock Bootloader (Must place Unlock_code.bin in the folder)
- Install Recoveries
User Provided Recoveries
TWRP 2.5.0.0 (S3 Model)
TWRP 2.5.0.0 (S4 Model)
TWRP 2.5.0.0 (Special Edition 64GB Model)
Kernels
User provided kernels
- Link to this thread (XDA)
- Link to PM me if you need a phone unlocked (XDA)
- Link to the One S Development thread (XDA)
- Boot Into Recovery
- Boot into Bootloader
- Relock Bootloader (must be in fastboot)
- APK Batch Installer (Credits to hamsteyr)
- Donate to me (Hasoon2000) -> Donating to yours truly for putting time into this!
Here is a screenshot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How To Use. THIS IS FOR THE PC ONLY. No plans ever for Mac or Linux. Sorry.
1. Download the toolkit DO NOT RENAME THE FOLDER
2. Download Winrar from here. Install it after you download it
3. Extract the folder anywhere.
4. Run the program.
Credits
- The guys at the AutoIT help forum that helped me learn how to make the script!
- Mods of the forum!
- Devs for making us ROMS!
- The community for being awesome!
- HTC for making us the phone so we can be a community!
- To everyone else I may have forgotten!
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.
DONATIONS
- joepi1
- edelossi
Click to expand...
Click to collapse
Downloads
Mod edit: Download links removed
Changes
V1.0 Released! 4-17-2012
- Initial Release
v1.1 Released! 6-11-2012
- Removed all old CWM/Stock Recoveries
- Removed all the kernels (Users flash things they have no clue about and soft brick their phones)
- Added TWRP 2.1.7
- Added ability to flash your own kernel/recovery
- Removed the debloaters
- Fixed Root. Now it works.
V1.2 Released 10-7-12
- Updated TWRP to 2.2.2.0
- Updated CWM to 5.8.3.1 Touch
- Updated Chainfire's SuperSU to 0.96
- Cleaned up a little code on my end
v2.0 Released 11-10-2012
- Updated TWRP 2.2.0 to 2.3.1.0 for S4 models
- Added TWRP support for S3 Models!
- Updated SuperSU from 0.93 to 0.97
- Added more info to my scripts so it would be easier to understand how to do things
- Removed a few links
v3.0 Released 12-23-2012
- Major Overhaul
- Users can now select their own recovery, kernel and unlock_code.bin. You no longer need to place it in a the data folder. Just browse for it
- Removed a lot of .bat scripts and integrated it in the program
- Updated SuperSU to 0.99
- Removed CWM
- Added TWRP for the Special Edition 64GB model
- Updated TWRP to 2.3.3.0 (S3 and S4)
- Added a few links
- Added ADB sideload (for use in TWRP)
This Update took FOREVER to do, but I did it for you guys!!!
v3.1 Released! 1-23-2013
- Fixed a bug where when you want to get your token ID, it'll boot into recovery rather than bootloader.
- When you want to relock the bootloader, it'll boot into bootloader and then lock it.
- Added a link to the factory RUU for Ville,VilleC2,VillePlus.
- Added Check CID feature
- Added a way to flash RUU Zip files
- Automated a few commands. No longer need to use the boot into bootloader then use the command to flash a kernel/recovery/unlock_code.bin
- Added more clarity
v3.3 Released! 1-30-2013
- Updated all TWRP recoveries to 2.4.0.0
- Updated SuperSU from 0.99 to 1.02
v3.3.1 Released! 2-1-2013
- Updated all TWRP recoveries to 2.4.1.0
- Updated SuperSU from 1.02 to 1.04 <--- This should fix the root issues now!
v3.4 Released! 3-2-2013
- Updated drivers to support Windows 8
- Updated all TWRP to 2.4.3.0
- Updated SuperSU to v1.20
- Removed the kernel section and added the kernel flashing under the Extras section
- Added new commands: GetVar All, Check CID
- Added S-Off ONLY commands: Write CID, Return to S-ON
- Added links: CID list, S-Off thread, SuperCID thread
- Added a section to S-Off the phone.
NOTE: I did not add any of the files from the S-Off thread/exploits to my toolkit. I added the official links to download the files but the files are not actually within my toolkit. Therefore, I did not violate what Jcase and beaups said since I did not incorporate the files to my toolkit.
v3.5 Released! 4-9-2013
- Updated HTC Drivers
- Updated all TWRP recoveries to 2.5.0.0
- Added 2 links (1 to follow me on Twitter and 1 to a YouTube video on how to ask for help properly)
- Added an Erase Cache command
v4.0 Released! 7-10-2013
- Removed Drivers and replaced it with a link (decreases size by 15mb)
- Updated all TWRP to 2.6.0.0
- Added Phil's CWM
- Fixed the Your Own Recovery Script.
- Updated SuperSU to 1.41
- New File Hosting service and added the links to my toolkit files in the program.
- Added a referral program.
Bugs
- Directory has to have one word.
Ex:
Will Work. This will solve any issues if the buttons don't work when you press them.
C:\Users\John\Dropbox\Phones\Amaze_All-In-One_Kit_V2.4
C:\Users\John_Smith\Dropbox\Phones\Amaze_All-In-One_Kit_V2.4
Will NOT work. Your directory will look something like this and buttons won't work when you press it.
C:\Users\John Smith\Dropbox\Phones\Amaze_All-In-One_Kit_V2.4
If you have 2 words, put the folder in Drive C:
Ex. This will solve any issues if the buttons don't work when you press them.
C:\Amaze_All-In-One_Kit_V2.4
Click to expand...
Click to collapse
Looking to add in the future
- Kernels
- More recoveries
- Makes Requests!!!
FAQs
Q - Why Did you make this?
A - To make life easier
Q - You are limited on features. Why?
A- You can always make a request!
Q - Will this work on other devices?
A - Only the fastboot commands, HTC Dev unlock (device specific) and the HTC drivers. Toolkit is made for the specific device.
Q - Will you support more devices in the future?
A - If people REALLY want, I can make it happen. I just don't want to make anything that nobody would use.
Q - Awesome! Can I make a donation?
A - Of course! Do not feel obligated though. If you would like to make a donation, you can click the button on my toolkit or under my username.
Link is now up!!
This is a very useful tool.. Thanks a lot man! Great to have someone like you on the One S forums
--
Good work man, are you limiting the toolset to outbound..as in bootloader recoverys kernels..or are you going to delve into the gui of the roms,like battery mods etc installing various bits and bobs?
just asking btw this tool will be invaluable
Thanks alot m8. You make our lives a little easier
Sent from my HTC One S
arknailed7754 said:
Good work man, are you limiting the toolset to outbound..as in bootloader recoverys kernels..or are you going to delve into the gui of the roms,like battery mods etc installing various bits and bobs?
just asking btw this tool will be invaluable
Click to expand...
Click to collapse
I can add in some tweaks. I just had to see where the files flash in recovery. I can't guarantee it'll work either since I don't have the phone. If you guys want to test it out, then I don't mind adding it in.
thanks for that
is this only for the international version? i plan one getting the tmobile usa variant, just want to make sure this will work with it.
Mr.Highway said:
is this only for the international version? i plan one getting the tmobile usa variant, just want to make sure this will work with it.
Click to expand...
Click to collapse
As of now, yes. The only thing that may not be the same is the kernel, but I doubt that. It should be 100% compatible. If not, I'll update it of course.
hasoon2000 said:
As of now, yes. The only thing that may not be the same is the kernel, but I doubt that. It should be 100% compatible. If not, I'll update it of course.
Click to expand...
Click to collapse
The kernel isn't an issue,I can hand one of my guys make one.
If I helped, give thanks, if you please.
........Death before dishonor........
Team inferno
Leader
Mr.Highway said:
The kernel isn't an issue,I can hand one of my guys make one.
If I helped, give thanks, if you please.
........Death before dishonor........
Team inferno
Leader
Click to expand...
Click to collapse
Everything should be fine then. I don't see why the recoveries wouldn't work. Everything is fine though.
Sent from my HTC_Amaze_4G using Tapatalk 2
Is it possible to flash splash screens without S-OFF?
I hate the blindingly white HTC screen when powering up in darkness... If thats possible it might be a worthy addition to the tool, but I fear the splash stuff resides on the radio.
hasoon2000 said:
Everything should be fine then. I don't see why the recoveries wouldn't work. Everything is fine though.
Sent from my HTC_Amaze_4G using Tapatalk 2
Click to expand...
Click to collapse
Alright, hopefully soon I'll be making roms over here.
If I helped, give thanks, if you please.
........Death before dishonor........
Team inferno
Leader
Mr.Highway said:
Alright, hopefully soon I'll be making roms over here.
If I helped, give thanks, if you please.
........Death before dishonor........
Team inferno
Leader
Click to expand...
Click to collapse
You should make ROMs for the HTC Amaze 4G. We need some new devs
hasoon2000 said:
You should make ROMs for the HTC Amaze 4G. We need some new devs
Click to expand...
Click to collapse
Depending on what I can upgrade to will affect where I'm going. I personally test all my builds. Typically I could use testers, but I run everything off my phone. That doesn't mean my work is bad, just can't get internet right now.
If I helped, give thanks, if you please.
........Death before dishonor........
Team inferno
Leader
When i try to flash a recovery it says device not found and nothing happens?
Edit: Found the problem. After unlocking the bootloader it wiped everything and turned off usb debugging, that was why it couldn't see my phone
But now i have a new problem. i cannot enter the recovery after flashing it?
Edit2: Never mind figured it out
svejstrup said:
When i try to flash a recovery it says device not found and nothing happens?
Click to expand...
Click to collapse
fix your connection then, install the correct usb drivers.
how is it supposed to flash a recovery to a device that is not properly connected?
I have been doing my stuff the manual way since I hit the android universe a bit over two years ago, and I'm generally skeptic to tools that attempt to do everything.
Just thought I'd try this one to flash recovery, just for the heck of it. I had already rooted a week ago, but held off on the recovery as the official CWM wasn't ready. One week without a decent recovery was enough. I used this tool to flash pauls interim recovery, and I have to say it was really simple and easy. (Alright, I read only first post, and didn't watch the video. I'm a guy after all, and user manuals are generally tossed aside )
Wondered why the download was so big tho... but a quick look through the folders revealed a good set of recoveries, a kernel and the HTC driver package.
Thanks to the author for a decent tool. It will no doubt help the n00b along just fine on his/her way to root and custom ROMs
Related
Post 1 - Information
Post 2 - Downloads and Release / Change Information
Post 3 - Bugs, Future Additions to the GUI, FAQ
I would like to add for those that like my toolkit, PLEASE DO NOT POST IT ELSEWHERE WITHOUT MY PERMISSION!
I have seen multiple sites who copy and paste my work to their site! If I do not approve of it, then do not do it! it will discourage me from adding updates since it is being used for their own benefits!
tl;dr.
If you post my work without permission, don't expect updates!
I created an easy to use GUI program for the HTC Amaze and I decided to make one for the HTC Sensation. I spent a good over 10+ hours to learn how to script, watch videos on how to do it, working on it during school when I should have been listening lol and all that fun stuff. I am going to fix it and up and add more updates to it. You CAN place requests and I will try to fulfill it!
If this helped you out, Please press the thanks button and if you want, you can always donate!
FEATURES
- Install HTC Drivers
- S-Off with Revolutionary's tool [Make sure to go to http://revolutionary.io and fill out your info and press download and you will get your beta key]
- Unlock Bootloader from HTCDev
- Get Token ID. Register at HTCDev, login to the site and submit the Token ID here. Buttons have been replaced and include links.
- Unlock Bootloader (Must place Unlock_code.bin in the folder)
- Install Recoveries
4EXT
TWRP 2.3.3.0
Your own recovery
- Link to this thread
- Link to the Sensation Development thread.
- Boot Into Recovery
- Relock Bootloader
- Donate to me (Hasoon2000) -> Donating to yours truly for putting time into this!
Here is a screenshot.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
How To Use. THIS IS FOR THE PC ONLY. No plans ever for Mac or Linux. Sorry.
1. Download the toolkit DO NOT RENAME THE FOLDER
2. Download Winrar from here. Install it after you download it
3. Extract the folder anywhere.
4. Run the program.
Credits
- The guys at the AutoIT help forum that helped me learn how to make the script!
- Mods who helped this forum!
- Developers made ROMs for everyone to use!
- The community for being awesome!
- HTC for making us the phone so we can be a community!
- To everyone else I may have forgotten!
*DISCLAIMER*
I take no responsibility for any fault or damage caused by any procedures within this guide. No warranties of any kind are given.
Downloads
Mod edit: Download links removed
Changes
V1.0 Released! 2-13-2012
V1.1 2-16-2012
- Moved some files into folder so Data folder is cleaner
- Added Bling's Debloater and Debloater Remover (Only for Sense ROMs)
V2.0 7-25-2012 Major Update!
- Updated UI to my latest version
- Added a root method
- Removed S-Off method and left HTCDev version
- Updated TWRP
- Removed CWM
- Added 4EXT
- Added ability to flash your own kernel/recovery
- Added more commands
- Added new features
- Added/removed links
v3.0 Released 12-23-2012
- Major Overhaul
- Users can now select their own recovery, kernel and unlock_code.bin. You no longer need to place it in a the data folder. Just browse for it
- Removed a lot of .bat scripts and integrated it in the program
- Updated SuperSU to 0.99
- Updated 4EXT
- Updated TWRP to 2.3.3.0
- Added a few links
- Added ADB sideload (for use in TWRP)
This Update took FOREVER to do, but I did it for you guys!!!
v3.1 Released! 1-23-2013
- Fixed a bug where when you want to get your token ID, it'll boot into recovery rather than bootloader.
- When you want to relock the bootloader, it'll boot into bootloader and then lock it.
- Added a link to the factory RUU
- Added Check CID feature
- Added a way to flash RUU Zip files
- Added a link for a Step-By-Step written guide made by me
- Automated a few commands. No longer need to use the boot into bootloader then use the command to flash a kernel/recovery/unlock_code.bin
- Added more clarity
v4.0 Released! 7-16-2013
- Updated File Hosters. I have 2 file hosting services so if one goes down, there will be another up!
- Updated TWRP to 2.6.0.0
- Updated 4EXT
- Updated SuperSU to v1.41
- Added S-Off commands (Must have S-Off already)
- Added popular links
- Removed HTC Drives and replaced it with a link. It will take you to the latest drivers that I upload! No need to keep updating my toolkit with drivers. Also, decreases the size by 14MB!
- Fixed some other bugs
Bugs
- Directory has to have one word.
Ex:
Will Work. This will solve any issues if the buttons don't work when you press them.
C:\Users\John\Dropbox\Phones\Amaze_All-In-One_Kit_V2.4
C:\Users\John_Smith\Dropbox\Phones\Amaze_All-In-One_Kit_V2.4
Will NOT work. Your directory will look something like this and buttons won't work when you press it.
C:\Users\John Smith\Dropbox\Phones\Amaze_All-In-One_Kit_V2.4
If you have 2 words, put the folder in Drive C:
Ex. This will solve any issues if the buttons don't work when you press them.
C:\Amaze_All-In-One_Kit_V2.4
Click to expand...
Click to collapse
Looking to add in the future
- Kernels
- More recoveries
- Makes Requests!!!
FAQs
Q - Why Did you make this?
A - To make life easier
Q - You are limited on features. Why?
A- You can always make a request!
Q - Will this work on other devices?
A - Only the fastboot commands, HTC Dev unlock (device specific) and the HTC drivers. Toolkit is made for the specific device.
Q - Will you support more devices in the future?
A - If people REALLY want, I can make it happen. I just don't want to make anything that nobody would use.
Q - Awesome! Can I make a donation?
A - Of course! Do not feel obligated though. If you would like to make a donation, you can click the button on my toolkit or under my username.
Dload link
I don't see the download link.
EDIT: You just added it seconds before I hit post. LOL
Shagman68 said:
I don't see the download link.
Click to expand...
Click to collapse
I just added it. It is in Post #2
Just a suggestion..... The flashtool for sony ericsson phones is really handy because it lets you put your kernels and recoveries and things in a folder, then when you select flash kernel/recovery in the programme it gives a list of all the files in the folder so you can choose which one to flash check it out and see what you think http://androxyde.github.com/Flashtool/ Maybe you can get some other ideas Thanks for this though it works awaesome
dmcb123 said:
Just a suggestion..... The flashtool for sony ericsson phones is really handy because it lets you put your kernels and recoveries and things in a folder, then when you select flash kernel/recovery in the programme it gives a list of all the files in the folder so you can choose which one to flash check it out and see what you think http://androxyde.github.com/Flashtool/ Maybe you can get some other ideas Thanks for this though it works awaesome
Click to expand...
Click to collapse
I'd love to check it out but the download link does not work lol. If you have it, can you upload it and PM me? Thanks!
Maybe you could add the options to flash boot animation and boot sound?
Great tool by the way!
edit: http://uploaded.to/file/b5w61lia <- that's the link to the sony ericsson tool
Thanks mate, will try it , need 2 s-off my phone
b3ndik said:
Maybe you could add the options to flash boot animation and boot sound?
Great tool by the way!
edit: http://uploaded.to/file/b5w61lia <- that's the link to the sony ericsson tool
Click to expand...
Click to collapse
Can you give me links to get the animations and sounds? and when I go to the link you gave me, it says
Code:
Not available
Our service is currently unavailable in your country. We are sorry about that.
Does me no good if I can't download it lol
Heres a torrent
dmcb123 said:
Heres a torrent
Click to expand...
Click to collapse
Torrent didn't work. I guess it had no seeders. I found it on 4shared. Thanks anyways!
hasoon2000 said:
Can you give me links to get the animations and sounds? and when I go to the link you gave me, it says
Code:
Not available
Our service is currently unavailable in your country. We are sorry about that.
Does me no good if I can't download it lol
Click to expand...
Click to collapse
I didn't mean any particular boot animations or sounds, but an option so people can browse through their libraries and select it. Then it will flash it or put it in the correct folder. It seems to wary a little depending on which ROM you are on. If it's not to much hassle tho.
b3ndik said:
I didn't mean any particular boot animations or sounds, but an option so people can browse through their libraries and select it. Then it will flash it or put it in the correct folder. It seems to wary a little depending on which ROM you are on. If it's not to much hassle tho.
Click to expand...
Click to collapse
If you are able to find animations/sounds, pass it over my way and I will try to see how I can incorporate it. I am trying to expand my toolkit to other devices so I want the Toolkit to be device-specific rather than universal.
Nice work... congratulations
webmasteryoda said:
Nice work... congratulations
Click to expand...
Click to collapse
Thank you!
Poll added. Please vote!
Can you make the same but reverse, in case we need to send our phone to HTC for warranty repairs?
Sent from my HTC Sensation XE with Beats Audio
Jaglicic said:
Can you make the same but reverse, in case we need to send our phone to HTC for warranty repairs?
Sent from my HTC Sensation XE with Beats Audio
Click to expand...
Click to collapse
Thats a really good idea m8 well done . Wish I had thought of that. But to be honest I dont thik its as easy asa that to do as you would need all the RRU files ?.
Then again what do I know lol .
Jaglicic said:
Can you make the same but reverse, in case we need to send our phone to HTC for warranty repairs?
Sent from my HTC Sensation XE with Beats Audio
Click to expand...
Click to collapse
What is needed to bring it to stock? Just run an RUU and it will flash it back to stock? I can probably do that BUT RUU files are usually 300+ MB. So it will be a huge file.
If you just want to flash ROMs / Recoveries and not Radios, I would recommend using the HTC Dev method rather than S-Off. I warrantied my phone in to T-Mobile over 6 times using the HTC Dev method since we (HTC Amaze owners) do not have S-Off.
Hi there, i'm starting here a discussion thread about Team Win Recovery Project 2.x for our HTC One SV.
Team Win Recovery Project 2.x, or twrp2 for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added a lot of our own features. It’s a fully touch driven user interface – no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Pictures by TWRP
As long as i know it will work for k2_u and k2_ul (LTE), cause both have the same partition layout.
This recovery don't work for boost mobile users!
Notice:
This is not my work, i'm not the developer of it!!! I only start the thread here about it because the dev is a russian guy (and i don't know, if he is here at xda and if he speaks english language).
Please be sure what you are doing, when you flash it, bricks can happen and i am not responsible for damaged devices. Do at your own risk!
Credits:
- xpirt for building it
- Modding.MyMind for his open mind
- MikG for earlier versions
- Team Win Recovery Project
- rollon76 for posting this here on xda
- jmztaylor (for being a great guy and help if needed)
- bkcokota (for his cwm recovery, a start for development)
Important: Recommended for hboot 2.21!
Download:
--------------------------------------------------------------------------------
This is not for boost mobile users!
You can find TWRP Recovery 2.7.0.1 (made by xpirt, credits and thanks to him) here.
Only for k2u & k2ul!
--------------------------------------------------------------------------------
The recovery for boost mobile (K2_CL) users is in the second post!!!
--------------------------------------------------------------------------------
How to install:
Download the img file and rename it to recovery.img
Put it into your fastboot folder and start a command window there.
Boot your phone into fastboot USB mode (bootloader + device plugged to pc)
Enter the following command:
Code:
fastboot flash recovery recovery.img
That's it.
K2_CL ONLY!!!!!
Kernel Source: Click Here!
Changelog Version 2:
Code:
* From commit [URL="https://github.com/ModdingMyMind/android_kernel_htc_k2_cl_twrp/commit/86a317157a741ef12042426696e3c84eeed3e263"]86a317157a[/URL] on my github.
* Kernel built in version 2.7.1.0
* Disabled Module support
Changelog Version 1:
Code:
* From commit [URL="https://github.com/ModdingMyMind/android_kernel_htc_k2_cl_twrp/commit/c34ea02e20b758e78cae9f8b8bc975d268accd84"]c34ea02[/URL] on my github.
* Kernel built in version 2.7.0.2[B]d[/B]
* Added full SELinux support.
* Removed HTC write protection.
---------------------------
---------------------------
TWRP 2.7.1.0 - for 4.2.2
TWRP 2.7.0.2d - for 4.2.2
TWRP 2.7.0.2c - for 4.2.2
TWRP 2.7.0.2b - for 4.2.2 (deprecated)
TWRP 2.7.0.2a - for 4.2.2 (deprecated)
---------------------------
---------------------------
TWRP source was patched from https://gerrit.omnirom.org/#/c/6283/
This patch allows the ability to take screenshots while in the recovery. It has not been merged over to the TWRP source yet so only unofficial builds at this moment will be seen with this feature.
To take screenshots while in recovery just press both the power key and volume down key. The screen will flash. It will naturally store the screenshot in your pictures folder of your sdcard if mounted in either your internal or external.
TWRP Changelogs:
Code:
[U]2.7.1.0
[/U]Built with custom kernel.
- [B]Removed custom theme and reverted back to stock theme.[/B]
- Add GUI option to change or repair file systems on individual partitions. The change is destructive so backup your data including internal sdcard first. This option should make it a little easier to migrate a device from ext4 -> f2fs, for instance. You will find this option under Wipe -> Advanced Wipe, then select only one partition and then press the Repair or Change File System button.
- Various bugfixes to backup and restore
- Improvements to USB storage handling
- Added a class to search for files to make finding the correct brightness file automatic in most cases
- Various other bugfixes and tweaks
[U]2.7.0.2d[/U]
Built with custom kernel.
- Added full SELinux support
- Completely removed HTC write protection.
[U]2.7.0.2c[/U]
Fixed init.rc to allow communication with binaries in /sbin.
TWRP 2.7.0.2c is built ready for SELinux, but the kernel is stock. Until they release the source I can't modify the kernel to support SELinux. This is really only needed for having 4.3+ roms but I want to include it in case the day comes and we see CM, AOSP, or possibly other sources.
[U]2.7.0.2b[/U]
Minor theme adjustment
Upgraded screenshot functionality throughout entire recovery
Note - version 2.7.0.2a screenshots are limited to only the main page
TWRP 2.7.0.2b is built ready for SELinux, but the kernel is stock. Until they release the source I can't modify the kernel to support SELinux. This is really only needed for having 4.3+ roms but I want to include it in case the day comes and we see CM, AOSP, or possibly other sources.
[U]2.7.0.2a[/U]
Built from CM11 and Omni 4.4 sources.
Extended backup options.
1. System
2. Boot
3. Cache
4. Data
5. Recovery
6. Misc
7. Firmware_radio
8. Firmware_q6
9. android secure
*** I think I listed them all ;)
Built in AromaFM.
Implemented screenshot functionality.
Added offmode charging.
Completely updated to fit with 4.2.2.
Includes Holofied Black Theme.
TWRP 2.7.0.2a is built ready for SELinux, but the kernel is stock. Until they release the source I can't modify the kernel to support SELinux. This is really only needed for having 4.3+ roms but I want to include it in case the day comes and we see CM, AOSP, or possibly other sources.
HTC Dumlock Instructions:
HTC Dumlock Instructions specifically for S-On users but S-Off users can use it as well if they choose to:
1. Install the build of TWRP using your method of choice, but you must actually flash TWRP to recovery.* No fastboot booting it.* We need it in recovery so that this build of TWRP will be flashed to your boot.* This new build of TWRP has features in it to easily restore your original boot.
2. Reboot into recovery.
3. Make a backup of your phone.
4. Tap Advanced.
5. Tap HTC Dumlock. (If you don't see HTC Dumlock then you need to remove any custom TWRP theme that you might be using.)
6. Tap Install HTC Dumlock.* This will install the app and binaries needed to make everything work nicely.
7. Reboot your device.
8. Find and open the HTC Dumlock app.
9. If/when prompted, give the app root (SuperUser) permissions.
10. Tap the Execute HTC Dumlock button.
11. Wait patiently for a couple of minutes.* It takes a little while.
If your device doesn't reboot automatically, reboot it manually.* Reboot it normally.* DO NOT reboot it to recovery.
You should now be in your recovery, but your recovery is flashed into boot.
12. Tap Advanced.
13. Tap HTC Dumlock.
14. Tap Restore Original Boot.
Use your recovery like normal.* Flash a new kernel.* Restore a backup with a different kernel.* Do whatever you please!
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Addition
This recovery also works in the ADB mode with root rigths.
In this mode, you can add (delete) files in the SYSTEM
on OS Jelly Beam
And sets the superuser, if superuser is not in the system.:good:
Are you the developer of it?
I hope it is ok for you that i have started a thread for it here?
Anyway, it works great and you have done it very well ! :good::good::good:
Thanks a lot!!
Thank you. Use it. Version 2.5.0.1 is made on the kernel 3.14.10-gf43d146.
Bootloader and boot restored only if you have S-OFF.
where can i download version 2.5.0.1?? i have 2.5.0 and it works great.
---------- Post added at 06:13 PM ---------- Previous post was at 06:06 PM ----------
MikG said:
This recovery also works in the ADB mode with root rigths.
In this mode, you can add (delete) files in the SYSTEM
on OS Jelly Beam
And sets the superuser, if superuser is not in the system.:good:
Click to expand...
Click to collapse
Is compulsory be S-OFF to delete files in system??could you explain how to do it??
thanks
titin83 said:
Is compulsory be S-OFF to delete files in system?
Click to expand...
Click to collapse
A custom kernel can do this also.
old.splatterhand said:
A custom kernel can do this also.
Click to expand...
Click to collapse
And is there alredy a kernel that let us do this?? By the way , what recovery are you using?? if is 2.5.0.1 , could yo tell me where download it?? in the russian page i got an error when i try to sign in there , and the translation with google is rather bad...
thanks
titin83 said:
And there is alredy a kernel that let us do this?? By the way , what recovery are you using?? if is 2.5.0.1 , could yo tell me where download it?? in the russian page i got an error when i try to sign in there , and the translation with google is rather bad...
thanks
Click to expand...
Click to collapse
To sign in there is really painful if you don't speak the language, but as far as i know it does not work as long you are on google translation. The captcha i could only pass with a guy from another board who speaks russian.
The recovery shows 2.5.0.0 but the filename from download page was Recovery_TWRP_2.5.0.1_HTC_ONE_SV.img so i think it is the same.
Kernel can be found here.
old.splatterhand said:
To sign in there is really painful if you don't speak the language, but as far as i know it does not work as long you are on google translation. The captcha i could only pass with a guy from another board who speaks russian.
The recovery shows 2.5.0.0 but the filename from download page was Recovery_TWRP_2.5.0.1_HTC_ONE_SV.img so i think it is the same.
Kernel can be found here.
Click to expand...
Click to collapse
And the last question , can i flash the kernel without installing the whole rom?? i mean , flash it in the rom that i update some weeks ago via OTA or have i to flash the ro that you have in your signature? My SV is K2_U , can i flash this despite be for K2_UL devices??
thanks
You can flash the kernel only and also for k2u (i have too).
If you are not S-off, you need to flash the zip in recovery and the boot.img inside with fastboot.
once i have flashed the kernel , what i have to do to delete some system app??
thanks again
Use a root explorer and go to system/apps/ and delete the one you don't need anymore (or rename it first to see if it causes problems).
But be carefull with what you delete and make a nand backup before!!!!!
titin83 said:
where can i download version 2.5.0.1?? i have 2.5.0 and it works great.
Is compulsory be S-OFF to delete files in system??could you explain how to do it??
thanks
Click to expand...
Click to collapse
Link in the header right.
S-OFF not need.
In the recovery mount SYSTEM. And the button ADVANCED-> File manager can work fine.
old.splatterhand said:
Use a root explorer and go to system/apps/ and delete the one you don't need anymore (or rename it first to see if it causes problems).
But be carefull with what you delete and make a nand backup before!!!!!
Click to expand...
Click to collapse
No, in JB OS files not be deleted.
Instead, use the file manager in the TWRP recovery.
edit: i was too fast... twrp doesnt work for me. it install perfectly but i cannot boot android anymore? does this work for someone else?
sakax said:
edit: i was too fast... twrp doesnt work for me. it install perfectly but i cannot boot android anymore? does this work for someone else?
Click to expand...
Click to collapse
Everything works fine in my device. Flash it again , perhaps something was wrong.
sakax said:
edit: i was too fast... twrp doesnt work for me. it install perfectly but i cannot boot android anymore? does this work for someone else?
Click to expand...
Click to collapse
This twrp recovery work on many device k2_u and k2_ul fine.
MikG said:
This twrp recovery work on many device k2_u and k2_ul fine.
Click to expand...
Click to collapse
my phone doesnt boot anymore after installing twrp recovery? do i have to reinstall kernel and system backup after flashing recovery? the problem is that i only have cwm backup available?
As long as i know, you can't restore cwm backup with TWRP. So you need to flash cwm and restore your backup with that.
Frequent Q&A (maybe?)
Q: WHY FAQ FIRST?
A: Because, I have seen some of you guys are so lazy to scroll down a bit to read this as this is essential post I think. And further more, I don't want you to brick your phone because of your lack of reading skill .
Q: Am I advised to do anything?
A: READ THIS CAREFULLY everyone. Since I changed the partition layout for more convenient to work on kitkat or future Android so I advise you to do a oneclick heimdall back to BML first, do a full wipe except for the sdcard and then flash the kitkat zip. Once u r in TWRP, full wipe and flash the build again (with or without gapps) . I might change the partition table several times until I have the good space calculation for rom and gapps tho, so this procedure is advised/required - just took u 30s to do that tho.
I will also mark the zip/update that have another different table that required this procedure then, otherwise, you can update via dirty flash.
Link to heimdall package: AntonX's Basic with a twist kernel [BML]
And here is the recommended procedure:
1. Make backup or whatever u need then copy the ROM into ur sdcard.
2. Reboot into Recovery and full wipe except sdcard.
3. Reboot into Download mode and Heimdall oneclick BML ROM/kernel
4. Flash the Slimkat build from CWM 5.x
5. After booted into TWRP, full wipe and flash the Slimkat ROM again - use the button combo to get into TWRP if it doesn't do it automatically.
6. Reboot and enjoy!
Q: Is this Rooted?
A: Yes it is. To have the Root privileges, Go to settings>about phone>then tap build number 7 times to enable the developer settings, once enabled, under root access, choose apps and adb. That's all. (Thanks to @foxxx5oh)
Q: Why doesn't this have Focal?
A: Because Focal is not available on Slimkat.
Q: Where is 'fix permission' option in CWM?
A: I believe koush decided to throw away the fix permissions button in CWM because he said it was largely placebo effect and had no real purpose anymore. (Thanks to @cpkelley94)
Q: Dahell, I can't use Google Now.
A: I found that all you have to do to fix Google now is get root explorer, titanium backup or SD maid, remove system app Google search and reinstall from play store... (Thanks to @turtlepa)
Q: My battery drains so fast and I found out that WiFi kept awake and running in background even I disabled it. Why?
A: Due to new Android version permission, Google set up a new option to allow Gapps to scan for nearby networks even when WiFi is off. To disable that, go to settings>WiFi>advance>untick the scanning always available option n u r cool again .
Q: Is this really KITKAT? And can I eat it?
A: Yes, yes it is. And u r advised to cook it before eating tho. Enjoy your meal then .
More that has been answered here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer: We are not responsible for any damages on your device.
Original Slim Features:
The Real Dark Slim
Notification drawer Shortcuts
Full hardware key rebinding!
Keyboard rotation
SlimCenter
Check out our full feature list here
Important Notes:
NO ETA's...
Fully compiled from AOSP source ( source.android.com) with our mods.
Read the Change-log and installation instructions from the official website carefully.
Feature requests will be ignored in general, but we will review ( if a relevant commit or source is provided) and then decide.
Please provide a logcat if reporting a bug.
Strictly NO ports based on our ROM zip (official or unofficial build) file, manifest.xml will be updated regularly and feel free to compile from source.
No discussions/screenshots etc in the thread about battery life, "best settings/gov/scheduler" for "best battery life" etc... see here for the reasons why...
Changelog
Find our latest Changelog go here
Chat with the slim team and other slim users
IRC: #slimusers@freenode
New to IRC? Don't have a native app? Try the Freenode web client [link] or the Firefox extension Chatzilla [link]
Google+ [link]
Twitter [link]
Facebook [Link]
Installation instructions
For Most Users
Please keep in mind if a special instruction is needed it will be noted in the Changelog
Download the latest build from here or via slim center - for further update.
Check the MD5 on Goo.im before flashing.
For Gapps Installation if you don't have it already): download Official Slim Addons from [here] or via Slim center.
!Recommended! One click heimdall a BML kernel/ROM then flash kitkat, then do a full wipe, and manual format /system.
Flash Slimkat ROM again and the addons you want, reboot - Make sure you are on at least CWM 5.x.x or TWRP.
FAQ
Check out out FAQ before posting! Keeps more common questions answered in one place!
Help us out!
If you want to help us by translating slim to your language check out Crowdin.net and submite your translations.
Or consider a donation.
Thanks!
You can find the full list of credits here
Source
Please visit here for the rom source code
Known Issues (According to Official issues of Slim bean on galaxysmtd):
Aries Common Bugs.
Slim Common Bugs - check at slim rom website.
Other than that, you tell me .
Galaxy S 4G exclusive Features:
Disabling Softkeys in advance Settings.
3.0.101 latest NiLTMT kernel v13.11.20
OTA Update from me - Need someone to confirm?
More Credits!
- Thanks to Erik for JellyBean Sake. And noiphonehere for talking over nights with me ---SORRY bro.
- Thanks to Team Acid plus JT1134 for ICS and Aries Goodness...
- Thanks to my new Badass Teamates (especially Thomas.Raines and Erik, Ray, and Cooptx haha)...
- Thanks to Cyanogen and pawitp for the Fixes
- Thanks to @DJLamontagneIII for a good kernel base
- And Special Thanks to XDA's Devs and members
Okay, The first Kitkat build is up. Go to my Goo.im, download and enjoy everyone! I need you to test the Slimcenter OTA updater for the next update also . Stay tuned!
Remember to follow the OPs tho, especially the first one about FAQ. You have to carefully follow the procedure to flash this ROM: Heimdall oneclick back to BML and then flash it. Remember to do a full wipe!
One more: for stability, OC and UV are not recommended. I might revert those 2 features in the next build.
thank you. just thank you. (tries not to cry)( old phone has more life left)
Based on latest slim kat ?
Thank You man !! i am going to with in one hr.
and i will let you my feedback
sir can i use gremlin remover?
it its similar to oneclick? but it contains roots and kernels??
cause im to lazy to download onelick PEACE
DerPuGNa said:
sir can i use gremlin remover?
it its similar to oneclick? but it contains roots and kernels??
cause im to lazy to download onelick PEACE
Click to expand...
Click to collapse
Ye, u can
Sent from my GT-N7000 using Tapatalk 2
- Installed Heilmdall one click(Kernel) over Jelly Bean !!
- installed "Slimkat-galaxys4gmtd-4.4.2-20131228"
now phone stock on niltmt (Kernel Boot Logo)
i am waiting for 10 minute nothing but just boot logo appearing
what to do now ?
ithunter said:
- Installed Heilmdall one click(Kernel) over Jelly Bean !!
- installed "Slimkat-galaxys4gmtd-4.4.2-20131228"
now phone stock on niltmt (Kernel Boot Logo)
i am waiting for 10 minute nothing but just boot logo appearing
what to do now ?
Click to expand...
Click to collapse
Hmm weird, lets me check the build again, or I might upload my previous build insted (w/o ota support). Interesting that the only change in this build compare to previous one running on mine is OTA suport and it was cleaner build (on mine was dirty one).
Oh wait, did u flash the build again via TWRP? If not, I am sorry that I forgot telling ya that once u r in TWRP, u have to flash it again (u know how to use TWRP rite?)
Anw, u can still heimdall again n flash slimbean tho so dunt worry
Sent from my GT-N7000 using Tapatalk 2
daothanhduy1996 said:
Hmm weird, lets me check the build again, or I might upload my previous build insted (w/o ota support)
Anw, u can still heimdall again n flash slimbean tho so dunt worry
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
trying again and again
nothing just kernel boot logo
ithunter said:
trying again and again
nothing just kernel boot logo
Click to expand...
Click to collapse
Did u flash the ROM again in TWRP? I mean:
1. Copy the ROM to sdcard then Heimdall BML kernel
2. Full wipe except sdcard and flash Slimkat build
3. After booted into TWRP, full wipe and flash the build again.
4. Reboot.
daothanhduy1996 said:
Did u flash the ROM again in TWRP? I mean:
1. Copy the ROM to sdcard then Heimdall BML kernel
2. Full wipe except sdcard and flash Slimkat build
3. After booted into TWRP, full wipe and flash the build again.
4. Reboot.
Click to expand...
Click to collapse
not boot in to TWRP !!
now i am back to fresh 2.3.6
ithunter said:
not boot in to TWRP !!
now i am back to fresh 2.3.6
Click to expand...
Click to collapse
Use the Combo volume + volume - and power button to boot into Recovery tho. If u wiped b4 heimdall then after flashing slimkat, it should bring u into TWRP. that was weird unless u hadn't wiped :/.
now again:
- installed fresh 2.3.6.
- installed AntonX-Basic_with_a_twist-v1.1.0-OC_UV
- wait 5~ minute on boot logo !!
- boot on cwm and install your rom
- auto reboot into TWRP
- install rom again
- wipe
- Reboot
- Phone boot into KitKat
Thank You !!!
jeez! no dao!
its working for me!
i just cant take screen shot! but it works promise DDDDD
THANKS! DDDDDDDDDDD
ithunter said:
now again:
- installed fresh 2.3.6.
- installed AntonX-Basic_with_a_twist-v1.1.0-OC_UV
- wait 5~ minute on boot logo !!
- boot on cwm and install your rom
- auto reboot into TWRP
- install rom again
- wipe
- Reboot
- Phone boot into KitKat
Thank You !!!
Click to expand...
Click to collapse
I added the right procedure onto OP anyway so everyone else should follow it easier. And FYI, u should have OTA updater works from now on for updating the ROM in future. U should receive a notification automatically everytime I upload a new build then. One more thing I have to do is finding a way to include Changelog and mayb look over GPS then .
DerPuGNa said:
jeez! no dao!
its working for me!
i just cant take screen shot! but it works promise DDDDD
THANKS! DDDDDDDDDDD
Click to expand...
Click to collapse
I can take screenshots hehe teeheee but no way I'm gonna upload them since my MOM got the phone back
P/s: I will make it weekly as long as the upload speed isn't affected by that stupid issue of my country's internet tho.
Good Luck to you and Good Luck for us too !!
Thank You !!
Bug:-
- lack of some useful cm Features (everyone know that)
- reboot after wallpaper set (once)
- lack of native advance overvlock/underclock options.
- phone connected on USB debugging even after disable from devs options
btw now i am confirm we will have perfect stable Kitkat )
ithunter said:
Good Luck to you and Good Luck for us too !!
Thank You !!
Bug:-
- lack of some useful cm Features (everyone know that)
- reboot after wallpaper set (once)
- lack of native advance overvlock/underclock options.
- phone connected on USB debugging even after disable from devs options
btw now i am confirm we will have perfect stable Kitkat )
Click to expand...
Click to collapse
I'm gonna exclude the OC and UV from the next update anw. It causes more trouble to the stability than it helps on the battery tho. Plus, it's good to let the phone rest for a while, 15 to 30 seconds after every boot finishes to ensure that u won't have freeze/reboot afterwards. and ye. Slimkat just hit the Beta phrase yet, features are slowly merged tho so stay tuned for OTA gift .
Thank you so much for is dao!
OTA works great. Is ART functioning? My SELinux status says Enforcing. Is that a problem?
Sent from inside the time vortex
GalaxyTab3_Toolkit v1.1
For use with the Samsung Galaxy Tab 3 8" WiFi - SM-T310 Model
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is an all-in-one tool, used to assist with rooting/custom recovery/stock rom/custom rom/bricks
I've made this because, there isn't a tool specifically for the 8" sm-t310 available, and I figured everybody could benefit from it somehow.
- Instantly and directly download the following:
--- GalaTab3 Kernel v14.1.6 (thanks to @arshull )
--- CWM Recovery v6.x r#4 (thanks to @emwno )
--- TWRP Recovery v2.5.0.0 r#3 (thanks to @emwno )
--- TWRP Recovery 2.6.3.0 (thanks to @gr8nole )
--- Philz Advanced CWM v6.12.8 (thanks to @Phil3759 )
--- Odin v.3.09
- Flash recovery, stock firmware image
- Read system information
- Run Odin within this app to flash recovery/firmware
- View live logcat
- Supports JDQ39 firmware 4.2.2 (does not currently work with 4.3/4.4!!)
- Perfect for noobs and advanced users
Download
http://www.f0il.com/android/GalaxyTab3_Toolkit_v1.1.zip - v1.1
Special thanks to:
@arshull - for his GalaTab3 Kernel work
@emwno - for his CWM & TWRP Recovery work
@regaw_leinad - for his AndroidLib project
@autoprime - for being a cool ass dude
@gr8nole - for his work on CWM recovery and Cyanogenmod port
@Phil3759 - for his awesome advanced CWM port
Changelog -
02/02/2014 - v1.1
(*) Fixed Reboot Download issue requiring root, will now reboot regardless
(*) Reworked GUI to be quite a bit more friendly
(*) Fixed a few connection related bugs
(+) Added option to make program always on top of other forms on/off
(+) Added options to download more recoveries
01/22/2014 - v1.0
(*) Fixed bug in GalaTab3 Kernel Download
(*) Changed GUI slightly, added section for "links" instead of including them under "tools"
(+) Added link to this support thread
01/20/2014 - v0.1a
First initial release
@emwno I tried to contact you in your twrp thread, but never got a response. If you want me to remove cwm & twrp from this program, or my server, please let me know and I will do so!
Sent from my iPhone using Tapatalk
Fantastic! Downloading..
Ok DEV i may need a spoon-full. Fired up the tool and scanned, it worked perfect, tab information showed-up and all buttons lit-up. Didn't try any recovery options cause i'm already rooted but i had been meaning to install galatab3. Clicking on "Get GT3 Kernel" didn't do anything and neither did clicking on "Gala Tab 3" (tools section) took me to the discussion thread but nothing else. Neither option downloaded the file, so is it something I'm doing wrong?
Downloading odin worked like a charm, i didn't try TWRP or CWM since I'm already rooted.
Reboot recovery and reboot system work. i haven't had a need to try any other functions (yet). Oh, one thing i found inconvenient is the tool is always-on-top.
I do believe if you intend for it to a tool for noobs, you do a separate tool for rooting and recovery only, sort of like a one or two click rooting with only one or buttons to click. As it is right now, there are too many options. And also you can really get in that noob mode and it would dawn on you to put in the instruction how to make the developer options show up in the first place LOL Just IMO DEV.
Thank you for all of your feedback @treetop777
When you click "Get GT3 Kernel," it should download the GalaTab3 Kernel right into the same directory as the program itself.
Once it downloads, if you then click the "Copy GT3," it will then copy the Kernel over to /sdcard/ path of the device. From there, you can reboot into recovery and install the zip file of GalaTab3 from the sdcard.
Please try that and let me know how it works for you. I will try to categorize everything better and lay it out easier with your feedback. Thank you
Sent from my iPhone using Tapatalk
foil said:
Thank you for all of your feedback @treetop777
When you click "Get GT3 Kernel," it should download the GalaTab3 Kernel right into the same directory as the program itself.
Once it downloads, if you then click the "Copy GT3," it will then copy the Kernel over to /sdcard/ path of the device. From there, you can reboot into recovery and install the zip file of GalaTab3 from the sdcard.
Please try that and let me know how it works for you. I will try to categorize everything better and lay it out easier with your feedback. Thank you
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
NP DEV. Will you put out an update? Cause for sure the version i have DO NOT download the Kernel and also, i don't see the "Copy GT3" you mentioned.
You know, now that i think of it, when i hover over the "Get GT3 Kernel" i get a message about the SD card. Maybe you meant that button to read "COPY GT3 Kernel" ?? If that's the case, then it would have to be moved to the tools section.
But first DEV, it has to download the Kernel which it's not doing right now. Unless I'm doing something wrong.
I'm sorry about the issue that you're having.. I am going to look into it in just a few minutes. I will release an update tonight for you.
Sent from my iPhone using Tapatalk
treetop777 said:
NP DEV. Will you put out an update? Cause for sure the version i have DO NOT download the Kernel and also, i don't see the "Copy GT3" you mentioned.
You know, now that i think of it, when i hover over the "Get GT3 Kernel" i get a message about the SD card. Maybe you meant that button to read "COPY GT3 Kernel" ?? If that's the case, then it would have to be moved to the tools section.
But first DEV, it has to download the Kernel which it's not doing right now. Unless I'm doing something wrong.
Click to expand...
Click to collapse
I have uploaded version 1.0 now, and have fixed the bug in the Kernel download method that I was using.
Please try the new version, and let me know if that fixes your problem(s)!
Once you click "Get GT3 Kernel," it will download the kernel zip, and place it into the current directory of the GalaxyTab3_Toolkit, then the button will rename itself to "Copy Kernel." Click that, and it will ask you if you'd like to transfer the kernel zip over to /sdcard/ on the tablet. Click yes, then once it finishes, click Reboot Recovery, and you will be able to install the kernel zip file from there.
Worked EXACTLY as expected! Downloaded GT3 then pushed it to the internal storage then rebooted into TWRP. After flashing GT3, rebooted into system and the tab is running smooth. No glitches, no problems. What more can i say - flawless!
It's nice to have all these procedures all in one place.
Thanks!
treetop777 said:
Worked EXACTLY as expected! Downloaded GT3 then pushed it to the internal storage then rebooted into TWRP. After flashing GT3, rebooted into system and the tab is running smooth. No glitches, no problems. What more can i say - flawless!
It's nice to have all these procedures all in one place.
Thanks!
Click to expand...
Click to collapse
Great! I am going to work on making everything a bit easier for everyone to understand, thanks to your input!
I'm glad everything worked for you
Sent from my SM-T310 using Tapatalk
Looks awesome going to give it a shot, lets see if this meets my needs.
Using it now but why no philz recovery?
Update....
Worked great thanks.
One small issue was having to put the device into download mode manually. I was getting an exception error about no root when I chose the reboot download button.
Once philz was installed, I used his root option and then installed supersu and Staricson busybox using smart install. Device is now rooted and I can start modding.
Thanks !
Small recomendation.. allow for the app to use or not use system proxy. Also, app should have an option to not always be on top.
CodeJACK said:
Using it now but why no philz recovery?
Update....
Worked great thanks.
One small issue was having to put the device into download mode manually. I was getting an exception error about no root when I chose the reboot download button.
Once philz was installed, I used his root option and then installed supersu and Staricson busybox using smart install. Device is now rooted and I can start modding.
Thanks !
Small recomendation.. allow for the app to use or not use system proxy. Also, app should have an option to not always be on top.
Click to expand...
Click to collapse
Well, I haven't had the chance to test Philz recovery out just yet, I only included the tools that I have personally tested.
I am going to add an option for all of the updated recoveries that support CM10-CM11! Also, I will add an option to allow it to not always be on-top, too!
I will look into the root-required Download Mode reboot, but it would always fail to reboot into Download Mode for me if I didn't run it as SU.. I'll see what I can do to fix it, because I know that it doesn't require root through a regular shell.
Thank you for your feedback!!
Sent from my SM-T310 using Tapatalk
duh... i was working on a toolkit :cyclops::cyclops: but anyways this looks awesome :fingers-crossed:
Nice all in one root package. Thanks a lot...
Sent from my SM-T310 using XDA Premium 4 mobile app
Does this toolkit also works with T311 (Tab3 8.0 3G)?
Gesendet von meinem SM-T311 mit Tapatalk 2
OllerLoewe said:
Does this toolkit also works with T311 (Tab3 8.0 3G)?
Gesendet von meinem SM-T311 mit Tapatalk 2
Click to expand...
Click to collapse
I don't have a T311 to test with, but once I get everything implemented that I want for the T310, I will try to add functions for the T311 for you!
Any love for the t315 4g version?
I've updated to version 1.1 guys, please check the changelog in the original post for more information!
@gx3k - no, I'm sorry, no support for T311 or T315 yet! I think everything is now good with the T310, so I will start working on the other two now!
@Phil3759 & @gr8nole - I added your recoveries to my project, and have hosted them on my server as well for a direct-download method. If this is a problem at all, please let me know and I will remove them asap! Thank you guys for all of your work
Superb!
Echoing what others have said, nice to see everything in one place, had my Tab rooted within ten minutes, thanks for the tool!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Proudly Presents
Another Exclusive Release
Supported Model
UMX U693CL
Recoveries
OrangeFox_10 Recovery
Roms
AssuranceRom Custom Stock- Android 9
OmniRom Custom GSI- Android 9
CrDroid Custom GSI- Android 11
-AIO ToolKit Prerequisites-
1- Linux: Linux Mint Cinnamon Suggested
2- Python 3
3- Pip install Command: sudo apt install python3-pip
Rom Notes/Disclaimer/Warning
**Don't Deviate From The Install instructions Or The Rom Won't Install Correctly**
**The AIO ToolKit Unbrick Option Is Not Meant To Be Used As A Daily Rom**
** Flashing AssuranceRom Will Bypass FRP Locked Devices **
**Battery Stats Are Broken On GSI Roms**
**Only Use OrangeFox Until Further Notice: 11-15-2021**
-AssuranceRom Clean Flash Installation-
1- Move AssuranceRom To Device(External SD)
2- Boot Recovery
3- Wipe Cache, Dalvik Cache, Data
4- Install AssuranceRom
5- Enjoy!!
-Custom GSI Roms Flash Installation-
1- Move GSI Rom zip To Device(External SD)
2- Boot Recovery
3- Wipe Dalvik, Cache, Data
4- Install Custom GSI Rom zip
5- Boot Custom GSI Rom & Wait Until A-Team Notification
6- Boot Recovery With Normal Reboot and Hold Vol+
7- Enjoy!!
Contributors
Thanks To @deadman96385 for the Firehose Programmer
Thanks To Brenton Miller For The Substantial Donation For Continued Dev Work On This Device
Also Big Thanks To Brenton Miller for September 2021 Device Firmware Files
Big Thanks To The Folks Who Have Come To A-Team Telegram Group To Help Test
Device Downloads
UMX U693CL Downloads
Recovery Device Trees
Device Source
A-Team Website
A-Team Supported Devices
TeleGram Live Support
A-Team Digital Solutions
-Updates-
6-17-2021: Setup for Official Release
6-19-2021: Initial Package Release, Bugs Expected, Recovery Tree still needs some work
6-27-2021: AIO ToolKit Release, removing Initial old release. ToolKit is unfinished and missing some recoveries but is working. I'll add the remaining recoveries and such as time permits
6-28-2021: ToolKit Update v0.06. Dumping options added to Dev Menu, Custom Stock/unbrick Images further tweaked, bugfixes, menu tweaks, etc...
7-3-2021: Added option to remove device encryption, custom stock/unbrick option now a menu, DarkStar Recovery added to recovery menu, disabled first boot setup screen, removed a couple more bloat apps
7-9-2021: AssuranceRom v0.07 recovery flashable zip released, AIO ToolKit v0.09 released, changelog and installation now included in toolkit, removed DarkStar and Batik Recovery(Too Old and Missing Needed Features), Added OrangeFox Recovery, Added PitchBlack Recovery, Android 9 GSI roms tested booting, Android 11 GSI roms tested booting
7-24-2021: AssuranceRom v0.08 Recovery Flashable zip Released, AIO ToolKit v0.10 Released, Changelog now included in the ToolKit Package
8-31-2021: Rude people associated with this device and I'm bailing, go find some other sucker willing to give up their free time, for free, only to be bashed.
9-16-2021: Re-Added Link for The Files, enjoy.
10-21-21: Fixed Main Thread Post, Planned updates are 2 more recovery builds, posting device tree source for all recoveries, update AssuranceRom based off newest OTA release, several planned updates for AIO ToolKit, investigate fixing Lockscreen bug when encryption is disabled, investigate fixing dialer not being set as default dialer on first boot(Magisk Script Not Kicking in Like it should)
10-22-2021: Added TWRP_10 Device Tree to Github & Updated Post Link, TWRP_10 Added to Device Downloads but not yet added into the ToolKit.
11-11-2021: Fixed MTP in Recovery, Fixed Decryption in Recovery, New version of AssuranceRom based off September 2021 Update, AssuranceRom Lockscreen bug fixed, AssuranceRom Dialer bug fixed, Device is now using default encryption since recovery has working decryption AIO ToolKit Updated to reflect new recovery builds, AIO ToolKit Updated to reflect updated unbrick files, several small tweaks to AIO ToolKit, TWRP_10 Updated in ToolKit, OrangeFox_10 Updated in ToolKit
11-12-2021: AIO ToolKit v0.14 Release- Broke Unbrick Option into 2 parts, ReadMe explains this more. Unbrick options will now auto reboot device after flashing, Added Option 9 for testing ADB Connectivity, AssuranceRom v0.10 Release, Re-Added Google Dialer into AssuranceRom(Now set to default dialer), Added AssuranceRom Installation Instructions to Main Thread Post
11-13-2021: AssuranceRom v0.11 Release, Post Boot Setup Script properly adds preset settings now for X-Plore, Preset settings for NovaLauncher, Added Custom Lockscreen wallpaper and wallpaper, Added a bunch more preset device settings to Post Boot Setup Script. Device will now auto reboot when Post Boot Setup Script is complete so that the changes and settings can be applied, Updated NovaLauncher, AIO ToolKit v0.15 Release, NovaLauncher Updated in unbrick System Image, Added Installation Warning on Main Thread Post
11-14-2021: Prep Main Thread for Custom GSI Releases, OmniRom_A9_Custom_GSI-UMX_U693CL-v0.01.zip Release, AIO ToolKit v0.16 Release(Unbrick Option 1 BugFix)
11-15-2021: AssuranceRom v0.12 Release(Consult ChangeLog), OmniRom v0.02 Release(Consult Changelog), AIO ToolKit v0.17 Release(Remove TWRP For Now)
12-5-2021: CrDroid Custom GSI v0.02 Release, Working Assurance Service and Volte OOTB, All GSI Roms will only require 1 install now , I will eventually spread that out to AssuranceRom as well in the future.
1-4-2022: AssuranceRom v0.13 Release, AIO ToolKit v0.19 Release, consult ChangeLogs for changes
I would love to beta test this if possible, and assume all risk that may come with it as my own problem.
Fcking suuuper excited to make this garbage phone just a little less stinky. Thanks for putting this all together!
lol I just noticed I am considered a new member... after 11 years on the site. Must be cause I lurk.
I am interested in an orange fox recovery. But at this point any will do. So, how does one get past the fastboot issue this phone has?
Striking gold once again I see, much thanks and kudos to you,can't wait for release
Thanks alot
I ****ed up and forgot to make a backup of data first. Anyone have the Assurance Wireless APK for activation backed up?
tesell said:
I ****ed up and forgot to make a backup of data first. Anyone have the Assurance Wireless APK for activation backed up?
Click to expand...
Click to collapse
Unless you're still on a Sprint sim,it shouldn't be needed. I'm on the new T-Mobile tower sim and did initial activation on a GSI just fine
timjames474 said:
Unless you're still on a Sprint sim,it shouldn't be needed. I'm on the new T-Mobile tower sim and did initial activation on a GSI just fine
Click to expand...
Click to collapse
sweet, yeah, i think i am on t-mobile, pretty stoked with it so far. unlimited tether data, and now that its rooted, my vpn works. thinking about cancelling my xfinity.
There a step by step guide?
OK got it worked out what rom you recommend for this device there along on the page lol
I'd like a step-by-step guide too. It would save people a lot of trouble if they don't know this particular method of unlocking. Also, is there a way to unlock the assurance sim card for use on other devices?
Minalia said:
I'd like a step-by-step guide too. It would save people a lot of trouble if they don't know this particular method of unlocking. Also, is there a way to unlock the assurance sim card for use on other devices?
Click to expand...
Click to collapse
Assurance locks the SIM to the IMEI network side,so short of commiting felonies no you can't. Good news is the UMX is sim unlocked out of the box,so you can go to any T-Mobile,AT&T or Sprint MNVO(May need to call ASW and tell them to cancel your service for Sprint ). SafeLink is a good choice for lifeline
An AIO ToolKit is about to be released for this device, I wrote it to handle everything from fresh untouched device to fixing a soft-bricked device. The initial release will be removed shortly and this new ToolKit is for Linux...
Thanks for all your work, assurance sent my grandfather a wiko phone, He received a call and from the phone call. the phone was bricked aswell as some chinese ransomware looking malware. Called assurance and their sending this malware infested UMX again, thanks to you though I can get off that malware infested os and onto stock android! Keep up the great work!
tx for this toolbox coming out!
i got this phone via assurance, and indeed, it not only installs many apps/websites with zero user control, but also apps with all chinese characters, and that was right out of the box. a month later i called assurance to stop my service with them, though i've kept this phone. they asked why i was stopping their service, and i just told her it was enough that i had daily apps/games/sites installed without my permission or control, but that some of them were in a chinese character set; this from a phone given to u.s. citizens applying for federal help during covid.
i now use safelink instead, which just gave me a sim for my pixel 3a, much simpler/safer than assurance.
This is an awesome feat. I thank you so much! BUT I do need to explain a couple points from my experience doing this, just in the event that it maybe helps someone out.
I followed the guide step by step but as I have attempted other root options in the past, I think it caused my phone to soft-brick due to those past attempts that I tried with only my own limited knowledge.
So this is my personal experience, only posting for others in the event that someone else has a similar or identical issue. The issue(s) I had were almost certainly not at the fault of the person who wrote this guide, just FYI. For many, their process has proved successful first-try, as you'll see within the comments.
Again, MY experience:
FIrstly, I had to do things differently. So I DID NOT flash anything to the boot partition. I SKIPPED THAT STEP. (Of course this is after my first try when I followed the post's instructions. After my first attempt I found myself in a soft-brick situation. Luckily, I have two of these devices so I was able to rescue the device using the working device's firmware and I only flashed recovery to begin with, and then booted into TWRP, pushed Magisk and installed it...error. Sideloaded Magisk, SUCCESS!
(Always use software from the creator's site/forum, even when you know you can get it here...just to ensure you're getting a safe and up to date version). Once you've got you some Magisk, you can choose to flash any of the recoveries...(I used OrangeFox and TWRP. OrangeFox is prettty cool, but I don't see backup/restore options like in TWRP. PitchBlack wouldn't show my files AT ALL so options were very limited with that recovery.
And other than that, this guide is awesome! I'm now rooted, and I've got LSposed and even changed my font with a magisk module, as well as the boot up screen haha.
Thank you so much to @PizzaG , for not only putting this together but for taking the time to share and help others.
(TAKEN FROM ORIGINAL POST-UNCHANGED): We really appreciate your effort and your sharing with us!!! You ARE AWESOME!
clintongsan said:
This is an awesome feat. I thank you so much! BUT I do need to explain a couple points from my experience doing this, just in the event that it maybe helps someone out.
FIrstly, DO NOT flash anything to the boot partition. SKIP THAT STEP. I did this and it bricked my phone. Luckily, I have two of these devices so I'm currently trying to use the other to pull the firmware off, partition by partition, in hopes I can restore the first one with it, without copying over device info....we'll see lol. But yeah, all you need to do if you want this awesome guide, created by these wonderful devs, to work, is just flash the recovery image...reboot into recovery. (You can hold power and volume up until you see the screen flicker/flash, then let go of power or both power and vol up (I don't think it matters) and wala! You've got into TWRP.
Now, either install Magisk off a microSD card OR just sideload it using adb sideload (path to magisk). I used the latest Magisk from their website. (Always use software from the creator's site/forum, even when you know you can get it here...just to ensure you're getting a safe and up to date version). Once you've sideloaded Magisk, you can choose to flash any of the recoveries...(I used OrangeFox and TWRP. OrangeFox is prettty cool, but I don't see backup/restore options like in TWRP. I'm sure it's there somewhere I probably just didn't look well enough.
And other than that, this guide is awesome! I'm now rooted, unlimited data (xposed framework modules) and completely dark-mode across the device (again, xposed modules). I even changed my font with a magisk module and the boot up screen haha.
Thank you so much to the guys/girls/team that put this together. We really appreciate your effort and your sharing with us!!! You ARE AWESOME!
Click to expand...
Click to collapse
you are false in giving people that "advice" if you were in the test Telegram group for this device, you would surely know that 3+ people have been testing the ToolKit without issue. I post the Telegram link for a reason. So if people have an issue with something, instead of badmouthing an option or feature, you come get live help to fix the real issue at hand, which is not flashing the boot image.
So I pushed root for this device and installed a batick recovery and bootloops, trying the unbrick restore.