README FIRST
Click to expand...
Click to collapse
PLEASE READ (READ AGAIN) POST #1, #3 BEFORE YOU POST ANY QUESTIONS. IF YOU ARE NEW TO FLASHING, NOT FAMILIAR WITH TERMS POST IN Q&A SECTION FIRST.
Introduction
Click to expand...
Click to collapse
This is the EMBRYO ROM, currently based of the ICS leaks for ATT Galaxy S2 Skyrocket (ATT SGH-I727), thanks to the designgears and the unknown leak source.
HOW I DO THINGS
Click to expand...
Click to collapse
I painfully deodex, zipalign ROM, using my stringent process, no kitchen tools or dumping crap in the classpath, every apk will be deodexed with *only* what it needs. Not I apply this rule to any Samsung APKS I port from other roms (such as SGS3). Hence EMBRYO is all about:
high quality
fixing what Samsung should have fixed
enabling restricted features
key unique enhancements
of course being your daily driver.
it will be a "clean-room" implementation, always.
I dont release half cooked stuff, the rom has to go through my daily driver tests before it gets to you .
Themeing will be sparse, if any, if someone wants to volunteer, great, I will include it as an add-on in the OP. If this is not what you are looking for move on, this ROM is not for you. I provide everything kernels, radios and ROMS, do NOT use it from anywhere else, since everything I do is from scratch, I can vouch for what I have provided.
EMBRYO and SAMSUNG RELEASES (OFFICIAL AND UNOFFICIAL) Mapping
Click to expand...
Click to collapse
EMBRYO-3.x : based of UCLE2 LEAK. Only UCLE2 kernel will work. You can flash any RADIOS that I have provided in the OP.
EMBRYO-2.x : based of UCLD2 LEAK. Only UCALC4 and UCLD2 Kernels. You can flash any RADIOS that I have provided in the OP.
EMBRYO-1.x : based of UCALC4 LEAK. Only UCALC4 and UCLD2 Kernels. You can flash any RADIOS that I have provided in the OP.
README FIRST BEFORE FLASHING
Click to expand...
Click to collapse
1) PLEASE READ THE ENTIRE POST #1 and #3. READ IT AGAIN, BEFORE YOU POST A REPLY. MOST OF YOUR QUESTIONS WILL BE ANSWERED.
2) I will give you my development environment. I ONLY use the recovery that I have posted in the RECOVERY Download Section here. All the CWM flashable zip are tested with that and NO OTHER RECOVERY. If you are doing Fix Permissions, Darkside Wipe (ATT Users Only) or god knows what else, something is wrong with your recovery, I have confirmed this with multiple users.
3) ATT Skyrocket Users: If you have never flashed the ONE CLICK ODIN Leak, please just DO IT. Follow the instructions in POST #3. Rogers Users, you are out of luck unfortunately, as the one click will not work for you.
4) Please DO NOT FLASH KERNELS and RADIOS FROM ANY OTHER PLACE. USE THE ONES I HAVE PROVIDED IN THIS POST. AS I BUILD AND VERIFY THEM TO ENSURE IT WORKS CORRECTLY WITH EMBRYO ROM.
DISCLAIMER
Click to expand...
Click to collapse
You take full responsibility for flashing anything from this post or things go bad!. Although, I take great pains and verification before I post anything.
Features and ChangeLog
Click to expand...
Click to collapse
Please check the subtitle for date and major release. All features listed here should be available in the latest ROM.
03-JUN-2012 (EMBRYO-3.2)
NOTE: The SGS3 apks were deodexed, zipaligned and the mods built on top of that (yup, can't trust anyone ).
♣ Fully ported SGS3 Launcher, removed Trebuchet. A lot of effort went into this, please don't kang the work. (NOTE: it is identified as Galaxy3 Launcher in EMBRYO).
♣ SGS3 Launcher: all widgets that come with EMBRYO supported out of the box.
♣ SGS3 Launcher: enabled wallpaper scrolling WITHOUT using any third party tools. (NOTE: even the stock TouchWiz launcher in EMBRYO supports it).
♣ SGS3 Launcher: You can set wallpapers by long pressing the workspace, works flawless. Except that Home and lock screen wallpaper will only set lockscreen. (Setting via Settings will still work though).
♣ Fully ported SGS3 S-Voice, hence update will remove the vlingo if it is there. Again, I have fixed most of the issues, but I have not tested all the features let me know so I can fix it next.
♣ Enabled SIP address kind in contacts (can someone test this?)
♣ Enabled In Call Equalizer (all options available now, again someone needs to test this).
♣ System settings has the SGS3 UI icons. (as much as I could)
♣ To make room for S-Voice, I have moved all additional ringtones/alarms/notifications to the sdcard. (delete it from there if you don't want it).
♣ YEAH!! Moved space heavy apps to /data (out device has 2GB), so S-Voice is ported to /data now. This will eat 100MB of your data..sorry folks if you cannot give me that much room..
♣ SGS3 Shutdown animation.
♣ Disabled ATT hotspot auto-connect and notifications, by default.
23-MAY-2012 (EMBRYO-3.1)
♣ V6 Supercharger *support*, the services jar is modified as per the instructions. Please follow the link here you if you wish to experiment.
♣ UCLE2 BUGFIX: Power + Vol. down screenshot fixed.
♣ Extended power menu enhancements: All confirm guards disabled, except for Power Off (my fast fingers need the guard ).
♣ *ALL* exchange server policies are bypassed (thanks to dnorthington for testing it thoroughly).
♣ Transparent lockscreen wallpaper is the default now. Since you can always add your own or change it.
♣ Bluetooth tethering enabled.
♣ Native Hotspot *ALL* functionality works, no hacks. (since EMBRYO-1.0)
♣ Nokia Pure is the default system font. Stock Fonts are in the add-on as a CWM zip.
♣ Lockscreen Wallpaper can be set, opened up all pickers! (be careful)
♣ TouchWiz 5x5 app drwaer, 5 icon dock!! (icons changed)
♣ TouchWiz 5x5 , 5 icon dock!!
♣ CRT-OFF (EMBRYO-3.X only)
♣ Trebuchet Launcher included..(please choose one when booted up, or remove it from included TiBu)
♣ Fix for scrollable wallpaper, even TW launcher!!
♣ Email, removed Stock and it's AOSP one.
♣ CM9 DSPManager is the default equalizer. removed stock one.
♣ AOSP Lockscreen is the default now.
♣ Messaging unlimited recipients (please dont spam)
♣ disabled keyboard switcher notification
♣ CHAINFIRE SuperSU is included (You will be prompted for updating binary say yes).
♣ Enabled Network Mode for RAT Unlocked Radios (will have no effect on RAT Locked radios, such as ATT). Please see downloads for RADIOS.
♣ Bumped up all Messaging limits (still ceiled)
♣ EXT4 filesystem are tweaked.
♣ Day of the week in the notification pull down.
♣ Contacts (ATT callout and yellow pages gone).
♣ Included additional fonts as per request.
♣ Carrier label gone, since I was touching the files.
♣ Extended power menu added (NOTE: EMBRYO-2.x download mode will not work, with UCLD2 kernel)
♣ Call Recording. (this will remove the Add Call button).
♣ Permanently Disabled annoying ascending ringtone.
♣ 15 toggle Mod ported (thanks wanam and lidroid)
♣ Titanium Backup included.
♣ All ATT and Samsung Bloat carefully tested and removed.
♣ Circle battery mod.
♣ zipaligned.
♣ ChainFire SU (Super SU) and busybox preinstalled.
♣ adblocking hosts file added
♣ Stock Kernel with my initramfs mods (init.d support, adb bash, adb root, bootanimation and init.d support).
♣ bunch of useful terminal tools (scp, ssh) compiled from sources.
♣ A lot of network tweaks
INSTALLATION
Click to expand...
Click to collapse
Please read the FAQ also, in case you run into any issues. Also, please follow the appropriate instructions for FULL ROM and UPDATES, below.
Installing FULL ROM (Data Wipe required)
IMPORTANT: These instructions are for full ROM. Requires Cache, Data wipe, in addition it is recommended to do a Format /system. You can pick and choose the RADIO that works best for you from the RADIOS section below, the ROM DOES NOT flash a RADIO.
♣ 1. Backup, Backup (both nandroid and tibu).
♣ 2. copy the update zip to your sdcard (doesn't matter internal or external as long as the recovery supports reading from it).
♣ 3. Boot into recovery.
♣ 4. Perform "Wipe Data/Cache Partition".
♣ 5. Go to "mounts and storage" -> Select "Format /system", complete the action.
♣ 6. Flash the ROM.
♣ 7. Reboot...and PLEASE WAIT at least 5 minutes.
♣ 8. Enjoy, hit the thanks button if you like it.
♣ 9. If you are restoring data from TiBU NEVER EVER RESTORE SYSTEM DATA, UNLESS YOU KNOW WHAT YOU ARE DOING.
Installing UPDATES (NON Wipe)
IMPORTANT: Make sure when updating you are on the correct version of the base rom.
♣ 1. Backup, Backup (both nandroid and tibu).
♣ 2. copy the update zip to your sdcard (doesn't matter internal or external as long as the recovery supports reading from it).
♣ 3. Wipe Cache and Dalvik Cache (typically Advanced -> Wipe Dalvik-Cache). (NO NEED to Wipe Data)
♣ 4. Flash the update.
♣ 5. Reboot. Please be patient, it takes some time to build the Dalvik-Cache, don't be in a hurry. The touchkeys will be lit up, as it is building.
♣ 6. If the update changes some of the system framework files, you will lose your account settings, please enable them back.
Clean INSTALL (FULL WIPE)
You need to do this, if you have messed up. Please see post #3 1st question. Also, this is highly recommended if you are having flashing issues.
DOWNLOADS
Click to expand...
Click to collapse
ROM (FULL WIPE)
Click to expand...
Click to collapse
PLEASE FOLLOW "Installing Full ROM" instructions.
♣ [24-MAY-2012] EMBRYO-3.1 FULL ROM (DATA WIPE required, follow the "Installing Full ROM" instructions)
ROM (UPDATES ONLY)
Click to expand...
Click to collapse
You don't need to wipe data. Please follow "Installing UPDATES" instructions.
♣ [03-JUN-2012]EMBRYO-3.2 UPDATE ONLY. You must be be on EMBRYO-3.1. I would strongly suggest that you wipe data, if you run into issues. Download
KERNELS
Click to expand...
Click to collapse
Note, please don't ask for a custom kernel, SAMSUNG needs to release the source, before it can be built. The kernel is basically stock with ramfs tweaks to enable some features. NOTE: the kernels below are packaged as CWM zip file, with EMBRYO ROM as the target, it may work in other ROMS, but I will not guarantee anything.
♣ [UCLE2] EMBRYO-3.X ONLY (ANY 3.X version of EMBRYO). DO NOT FLASH ON EMBRYO-2.X or lower versions. This is the kernel from the first leak. Download
♣ [UCALC4] EMBRYO-2.X ONLY. DO NOT FLASH ON EMBRYO-3.X This is the kernel from the first leak. Download
♣ [UCLD2] EMBRYO-2.X ONLY. DO NOT FLASH ON EMBRYO-3.X. If you want to revert back (the one bundled with full rom). Download
RADIOS
Click to expand...
Click to collapse
THE ROM DOES NOT COME WITH A RADIO. ALTHOUGH THE RADIO THAT YOU HAVE WILL WORK WITH EMBRYO, IT MAY NOT PERFORM AS WELL FOR YOU. OR IF YOU WANT TO STICK TO THE RADIO THAT MATCHES THE SAMSUNG BASE OF EMBRYO (RECOMMENDED), FLASH IT FROM BELOW. NOTE: THIS ARE PACKAGED AND VERIFIED TO WORK WITH EMBRYO ROM. SEE THE TOP OF THE POST FOR MAPPING OF EMBRYO VERSION AND SAMSUNG BASE.
Please note, radios/modems depend on lot of factors. I have provided the rogers radio which is RAT unlocked so you can take advantage of the Network Mode enablement in EMBRYO-2.x and above. ALL ATT Radios are RAT LOCKED, which means you cannot change the Network Mode from Settings, ONLY ROGERS Radio allow you to do that.
♣ [23-JUN-2012] ROGERS RADIO UXLF3 (from OFFICIAL ROM). Download.
♣ ATT-SKYROCKET UCLE2 radio (EMBRYO-3.X is based of UCLE2 base). Download.
♣ ATT-SKYROCKET UCLD2 radio (EMBRYO-2.X is based of UCLD2 base). Download.
♣ ATT-SKYROCKET UCALC4 radio. (EMBRYO-1.X is based of UCALC4 base). Download
♣ ATT-SKYROCKET UCLA3 radio. Download
♣ ROGERS-SKYROCKET UXKJ7 radio. Download (RAT UNLOCKED)
♣ ATT-GALAXY-NOTE UCLC5 radio. Download
♣ ATT-GALAXY-NOTE UCLD3 radio. Download
RECOVERY
Click to expand...
Click to collapse
There are many recoveries out there, all apparently have some issues or other. Unless I instruct otherwise, please follow the instruction, don't try to be cute . The following is the recovery I use to build and test my ROMS. IF YOUR BACKUP HANGS PLEASE CREATE THE .hidenandroidprogress IN BOTH INTERNAL AND EXTERNAL SDCARD (IF YOU HAVE ONE) IN THE FOLLOWING FOLDER /sdcard/clockworkmod and /sdcard/external_sd/clockworkmod.
♣ Touch Recovery CWM 5.5.0.4 (I have been on v3.5 for a while and thats the one I am providing here) (note: you need ODIN, this is a ODIN tar) Download (thanks to sk8erwitskil)
ADD-ONS / PATCHES / REVERTS
Click to expand...
Click to collapse
If you want bloat, please ask will provide them as a separate cwm zip. Also people please only install it on appropriate version of EMBRYO ROM, do NOT install it on different versions.
♣ [04-JUN-2012] (updated to EMBRYO-3.2) Enable IME Switcher EMBRYO-3.2 ONLY. Download.
♣ [04-JUN-2012] Google EMAIL (AOSP) ANY version of EMBRYO-3.X. I would recommend a Data Wipe, if you run into issues, also if you are doing this and you are on EMBRYO-3.2, please reinstall the EMBRYO-3.2, update, then install this. Download.
♣ (06/01/2012) Revert Adblock. You can flash this on ANY EMBRYO version, this will restore the stock hosts file. Download
♣ (05/26/2012) Stock EMAIL EMBRYO-3.X ONLY. I would recommend a Data Wipe, please do this to avoid any issues. Download.
♣ (05/24/2012) AOSP Lockscreen EMBRYO-3.1 ONLY. Download.
♣ (05/24/2012) AOSP Lockscreen with VOL Buttons Wake EMBRYO-3.1 ONLY. Download.
♣ (05/24/2012) STOCK Lockscreen EMBRYO-3.1 ONLY. Download.
♣ (05/24/2012) STOCK Lockscreen with VOL Buttons Wake EMBRYO-3.1 ONLY. Download.
♣ V6 Supercharger scripts link for those who want to take a shot at it, EMBRYO-3.1 and above only. Please DONT install busybox or su, if you follow the instructions, here V6_Supercharger Link. EMBRYO already includes it. Also, I have NOT tested this..
♣(05/20/2012) Restore Stock Fonts - EMBRYO-3.X ONLY Download.
SAMSUNG ATT BLOAT
Click to expand...
Click to collapse
Please remember that the bloat may kill your battery life, please do NOT complain if it does..consider yourself warned.
♣ EMBRYO-3.X ONLY: ATT Visual Voicemail CWM flashable zip. Download (See POST #3 for more info, you may lose outgoing call ring tone).
♣ Samsung and ATT bloat: EMBRYO 2.2 ONLY .(YOU HAVE BEEN WARNED) Download
BUGS/KNOWN ISSUES/TODO
Click to expand...
Click to collapse
♣ See POST #3 also.
♣ The Data toggle is buggy, it is in my TODO list.
CREDITS
Click to expand...
Click to collapse
♣ DesignGears and the UNKNOWN Source of course.
♣ wanam and lidroid for the 15toggle mod. You can thank wanam here and lidroid here.
♣ Circle Battery Mod, was incorporated by using this link here.
♣ ChainFire for Super SU.
♣ sk8erwitskil for the recovery which I use for ROM development. You can thank him here.
♣ Special thanks to some users of the ROM for providing feedback.
Pictures
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FAQ
FREQUENTLY ASKED QUESTIONS/ ISSUES ETC.
Click to expand...
Click to collapse
♠ How do I get a CLEAN install done? (ONLY for ATT SKYROCKET USERS)
This is what I do if I really really need a clean install. Do the following, I am assuming you have your PC configured and ODIN installed and your device is detected:
1) Back up your Internal SDCARD (if you are using Tibu, backup the Tibu Folder to your PC).
2) Flash the ONE CLICK ODIN ICS leak UCLE2 or (UCLD2) (here is the torrent link, DOWNLOAD). NOTE: your internal SDCARD will BE WIPED.
3) Now, boot up. Copy the EMBRYO Full ROM to your SDCARD.
4) Since, you will not have root, hence no CWM. Flash a CWM recovery via ODIN, here is the ODIN tar that I use (thanks sk8erwitskil). Download
5) Now, you need to get into CWM recovery to flash the ROM you saved in Step 3). Either use "adb reboot recovery" is you are usb tethered or the 3 finger salute.
6) Follow the Flashing Full Wipe ROM instructions..
Galaxy S3 Launcher Questions
Click to expand...
Click to collapse
♠ Home and lock Screen Wallpaper only sets the Lockscreen?
Yes, it in my TODO. You can *ALWAYS* use the Settings -> Display and set it there.
♠ Third party widgets, will it work or not?
All the widgets that are included in EMBRYO should work. Any other third party widgets may or may not work, not in this launcher the H/W acceleration is turned on by default. So, you need to be sure your widget supports that otherwise use the included Touchwiz (stock) launcher.
Galaxy S3 S-Voice Questions
Click to expand...
Click to collapse
♠ Deleting an Alarm does not remove the icon from Statusbar?
Yes, this is a bug in S-Voice I believe (or a feature?). I need to look into it, but you can restart the phone and it will go away.
♠ Double tab Home Button does not launch S-Voicce?
This is in my TODO. I need to look into the keybindings.
♠ How did you manage to get the storage to accomodate S-Voice?
I have modded it to be installed in /data partition. This frees-up a lot of space.
MISC Questions
Click to expand...
Click to collapse
♠ Do I need to flash a RADIO?
It depends. EMBRYO should work with any existing SR Radio that you may have. I will definitively recommend to use the RADIO with the SAMSUNG release (or leak) that the version of EMBRYO is based of. The OP has *ALL* the radios that are extracted to work with EMBRYO. Flash the one that you want or works best for you. DON'T START POSTING RADIO FLASHING QUESTIONS IN THE THREAD.
♠ I want the STOCK AOSP EMAIL App back?
Since EMBRYO-3.2 I have restored the STOCK e-mail back. If you want to use the AOSP ones (don't know why) I have them as an add-on, see post #1 add-ons sections.
♠ Tethering?
All tethering is Native Tethering as provided by Stock and ICS. And yes, it works flawlessly.
♠ SuperSU asks for updating the SU binary, what should I do?
You should hit the continue button. First time around, some users have reported that the Phone freezes and reboots, I have not looked into the issue. But after the reboot, it should work fine. As a workaround, try to access an app like TiBu, *before* you click super-su. In general, there is nothing to configure in Supersu, i wish it was a hidden app.
♠ I want the weather widget in the LockScreen?
Since EMBRYO-2.2 and above (including 3.0), I have moved to AOSP lockscreen, which does not support it. Please flash the Stock LockScreen (it is in the download sections, Add-ons). Please make sure you select the appropriate one for the version of EMBRYO you are running.. You must have flashed the AOSP Lockscreen add-on, flash back the Stock Lockscreen from add-on (make sure the version matches the EMBRYO one).
♠ Setting Lockscreen Wallpaper?
ICS has a very rich set of settings. And since I don't know exactly what the behavior is supposed to be, since we don't have the official manual yet, I cannot help you with the settings much. And on top of it your security settings affect it. If you want the normal behavior, go to Settings -> Display -> Lock Screen Wallpaper. Set you wallpaper there. Then make sure in Settings -> Security -> Lock automatically is set to "Immediately". NOTE: the above applies to Stock WallScreen (i have not tried it in AOSP Lockscreen).
See this post #397 for more info.
♠UCLE2 BUG: (affects EMBRYO-3.0) Screenshot Power + Vol low. does not work. Fixed in EMBRYO-3.1
The usual ICS key combination of Power + Vol Low, does not work in UCLE2 (effects EMBRYO-3.x).
♠UCLE2 BUG: (affects EMBRYO-3.0) Backlight Capacitive light bug in UCLE2
Effects EMBRYO-3.x and ALL UCLE2 based ROMS. It currently works on and off.
♠ UCLE2 BUG? Maybe note sure: Installing ATT VVM, might lose outgoing call dialtone.
This is not confirmed yet to be a bug, but some users have *not* experienced this, YMMV.
♠ What about Flash Player?
Since EMBRYO-2.2 it has been removed, please download it from the market/play store.
♠ Do I need to be in the <insert favorite> radio?
Please flash any radio that is in the Post #1 RADIOS section. ALWAYS backup your /efs partition. And I would also back this up in RECOVERY so it is not backed up while running the OS.
♠ Cannot change Network Mode selection when using ATT radios?
Sorry RAT locked..complain to ATT . Only ROGERS radio you can change it.
♠ Rogers RAT Unlocked Radio, two other modes are not working?
I believe the firmware is not allowing to change it to HSPA only or GSM only (need to test it out). So the Network mode feature should be considered experimental for now.
♠ Auto Brightness off and swipe status bar has no effect?
The UCLD2 kernel has this regression, flash the UCALC4 kernel if you need this.
♠ Extended Power Menu Download does not work, it reboots? Samsung has fixed this in UCLE2 kernel, so it should work in EMBRYO-3.X versions of ROM.
The UCLD2 kernel has this regression, flash the UCALC4 kernel if you need this. The UCLE2 and UCALC4 kernels do not have this issue.
♠ What bloat has been removed?
Pretty much all Samsung (except for TouchWiz of course) and all ATT nonsense has been purged.
♠ I need the weather in the lockscreen?
Since EMBRYO-2.1 it is the weather widget is provided.
♠ Will you provide any themes?
Maybe, maybe not, no promises. As bandwidth permits, even if I do it, it will be a port of some high quality one. And it will be an optional thing over the base for sure.
♠ How can I change the Order of the Toggle Buttons in the 15 toggle panel?
Please use the included QuickPanel Settings application in your app drawer.
♠ I need Samsung social apps, Kies aka all the bloat?
See the downloads section (Samsung and ATT bloat) in OP. You have been warned, also make sure you download for appropriate version of Embryo.
Woot! First post and first download. Thanks man. Will flash tonight and test in the morning!
Edit: Just flashed runs fine as I can see now. Ill provide more detail tomorrow. Great work thanks again.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Going to try it out after the download, and thank you for all your hard work on making a good rom.
Sent from my SAMSUNG-SGH-I727 using xda premium
have you been able to make it switch networks
I mean if you've been able to add network mode.
is just so when throttled, switching apn's help alot
Can't thank you enough, Mohan. Embryo 1.0 was the best UCALC4 rom I ran. I'm sure 2.0 will be even better!
Where the weather widget?
Sent from my SAMSUNG-SGH-I727 using xda premium
WOW
THANK YOU!
Great ROM
Testing his baby out. Liking it a lot so far. Small issue, Fc when trying to set weather on lock screen under display settings.
Sent from my SAMSUNG-SGH-I727 using XDA
sgs2_1.6 said:
Where the weather widget?
Sent from my SAMSUNG-SGH-I727 using xda premium
Click to expand...
Click to collapse
capita said:
Testing his baby out. Liking it a lot so far. Small issue, Fc when trying to set weather on lock screen under display settings.
Sent from my SAMSUNG-SGH-I727 using XDA
Click to expand...
Click to collapse
Added all the weather widgets I could find as an CWM zip in the OP (see attachments)..This should enable that for you folks.
I will not be able to check back till later tonite..
CWM & Modem
Hey mohan, thank you for your hardwork. Couple of questions, since I haven't tried your rom yet:
1. I'm using CWM 5.0.2.6, will the current version work or do I need to upgrade it? What do you recommend?
2. I'm using "first" ICS leak with UCALC4 modem, will I need to flash your rom plus the radio, or just your rom (since the modem is already incorporated in it)?
Thanks.
artbybart said:
Hey mohan, thank you for your hardwork. Couple of questions, since I haven't tried your rom yet:
1. I'm using CWM 5.0.2.6, will the current version work or do I need to upgrade it? What do you recommend?
2. I'm using "first" ICS leak with UCALC4 modem, will I need to flash your rom plus the radio, or just your rom (since the modem is already incorporated in it)?
Thanks.
Click to expand...
Click to collapse
* Not sure about CWM 5.0.2.6. I use the 5.5.0.4 here.
* If you install this ROM. Then you can flash the radio afterwards, the link is there for UCLD2. Next few days, I will create zips for backing out various radios..
Love this rom! Awesome work!
aah you got the toggle mod working thank you!
Kernel (UCLD2) is included.
I will provide a separate zip for UCLD2 modem (later).
Debloated with care. (Let me know if you need specific APKS, I need good battery life, hence had to purge a bunch of things).
zipaligned
The usual busybox, ChainFire SU (superuser), bash.
Tethering Support, both HotSpot and USB.
Call Recording. (replaces Add Call Button)
15 toggle mod (PORTED from Wanam ROM, thanks wanam).
Circle battery.
Titanium Backup
Bunch of other tweaks..will update...
Please NO themeing requests, at least not right now.
Man you beat me to it i almost had it working but I messed up something because my SystemUI kept crashing! LOL... can I use this on my rom if you don't mind? THANKS!
Everything is working well for me except that there is still a problem setting homescreen wallpaper. Obviously not a huge deal as I just use WSS. Just thought I'd mention it. Thanks so much for all of your hard work.
Sent from my SAMSUNG-SGH-I727 using XDA
I'm glad the native tethering app now works as it should, thank-you chef
Looking good!
So far so good, got a bit bumpy on the way but got there eventually! I flashed cwm touch (took couple of attempts before getting it right) then flashed the rom then the modem. During the initial bootup process, it got hung up at the "Android" sign. Went back into cwm and reflashed the rom and modem then it booted up all the way.
1. I restored using tibu and looks good so far.
2. I also installed apex launcher (kinda like it more than tw launcher).
REQUEST: any chance you can add options for "Recovery" and "Download" in the extended menu? That would be awesome!!
One other minor and somewhat insignificant thing I've noticed since installation (and since fixing permissions and all that):
- The phone does not make an unlock sound upon unlocking (even when that feature is chosen in System Settings--> Sound--> Screen lock sound
Just thought I'd mention it.
tonyfiore75 said:
Everything is working well for me except that there is still a problem setting homescreen wallpaper. Obviously not a huge deal as I just use WSS. Just thought I'd mention it. Thanks so much for all of your hard work.
Sent from my SAMSUNG-SGH-I727 using XDA
Click to expand...
Click to collapse
tonyfiore75 said:
One other minor and somewhat insignificant thing I've noticed since installation (and since fixing permissions and all that):
- The phone does not make an unlock sound upon unlocking (even when that feature is chosen in System Settings--> Sound--> Screen lock sound
Just thought I'd mention it.
Click to expand...
Click to collapse
* Wallpaper: yeah I left out that apk..will post the apk later.
* Sounds: You have to crank up the Volume for System Sounds. It is working for me..will have to triage that...if not so. Also, you shouldn't have to do fix permissions, I have carefully recrafted the permissions and also I have no idea what the Fix Permissions in the recovery does, hopefully it didn't mess things up .
Related
This post has been updated for damages new release 2.05.02 is latest one of my builds. Older info on v2.0.1 rom retained at bottom of thread. Awesome stuff damaged, alot of old annoyances were fixed (contacts bug for one). For all the stuff damage fixed go over to thread?t=656690 .
I tweaked the update script & this should be a no wipe if you were on last version of mod. Remove any widgets from your homescreen before flashing for best results. ALWAYS wipe dalvik in recovery right after you flash, I've found best results with this. as always ymmv so nandroid. All old themes should still work, i dont think the seperate dialers links will though. Full already has black dialer. Started to split up rom, light version with only 33.8mb in /system/app/ is up, internal memory was about 115 free with no a2sd from wipe. Pretty sweet with the 5 screen launcher and live wallpapers, also feels pretty fast.
If you are unsure what to get start with the latest version of full mod - DamagedTrev2.05.02.zip
If you enjoy modding mix & match. Light + themes, Light + Sense + themes, browse through the addons too & if you come up with anything good post here ill update first post
OverallTweaks (These are applied to every update file below):
-Memkiller at: cat /sys/module/lowmemorykiller/parameters/minfree - 1536,3072,4096,21000,23000,25000
-Working Apps2sd & no wipe (if your lucky)
-quickoffice/wifitether included
-modified firstboot.sh to fix uuids & remove old versions of wifitether if usin apps2sd.
-cleared lockscreen bars
-disabled htc checkin service along with other script tweaks
Only 2.05.02 and newer
-Many Apk Optimizations (things feel alot faster, look at filesizes in /data/app/ !!)
-Launcher hexedited to allow 5 Screens
-LiveWallpapers (some livewallpapers dont work-throws error OpenGL ES Lite not supported)
-Youtube hexed to prefer higher qual stream
If it freezes or stays booting for longer than a half hour you win a wipe. Wipe everything in Recovery menu, data, dalvik & ext. Then start by flashing Light Version then addons.
Issues & Fixes
Ive been using the 'FULL' mod for a few days now and it is very fast & stable. I havent gotten any FC's in day to day use.
*WHEN IN DOUBT WIPE _EVERYTHING_ IN RECOVERY & REFLASH*
-If superuser doesnt work make sure USB Debgging is on in Applications -> Development
-If you dont see all widgets clear data for htc sense under manage applications.
-If your Rosie goes to HTC screen each time make sure spare parts has activity/process management set to normal.
-If you STILL Have problems and dabbled with other 2.x roms before check out your PRI ?t=653735
-Smiley face instead of a down arrow on keyboard? Hold the configure button down & uncheck smiley hack. Reboot phone. You can also get old keyboard back by flashing &postcount=435
-If you want to switch to my modded 5 screen stock launcher just go to settings applications HTC Sence and clear defaults. Then if you press the back arrow or home button a bunch youll get a menu asking what to run & can choose a new default.
-Browser is a bit laggy in 2.05.01. I think i fixed it in .02 with all my other optimizations.
-If you dont use sprint voice mail id remove Sprint_Core.apk from /system/app/ orelse it always runs in backround
-if you have issues with audio cutting out avalaunchmods posted a fix i modified to work with apps2sd & gumbo (TESTING STILL!!!) over in ?t=657244 Please report back if works
Battery Issues:
-Check your awake time in settings -> about phone -> battery. if awake is the same as your uptime you got a problem. If its high run spare parts, go to battery history & check partial wake usage. Mine is 3 hours after 14 up on a single charge and still have 2 bars of battery left. Used GPS/phone/text a good bit battery life is on norm for me. Wipe everything & reflash if you have 100% uptime.
-All alarms/tones/etc work for me out of box with full, couldnt seem to get them not to work. If they dont for you theres probably something else wrong.
Light Version: *NO SENSE!*
Pretty much stock android with HTC dialer + keyboard. Uses HTC lock because stock is busted. Includes sprints vvm, remove if using gvoice its always running.
Everything looks close to stock but no HTC widgets & modified version of launcher so 5 homescreens instead of 3! Includes LWPs. Will probably have to wipe to go to this.
Did a wipe & flash, internal memory was 115MB. - DamagedTrev_2.05.2_LITE.zip
(used wheresmycellphone.com to make it ring, dont pm idont care about the #)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Stock Rosie look & feel
resets curved lockbars, resets custom statusbars & gets you back to the stock rosie look & feel. Includes all htc widgets & apps. Flashable ontop of only 2.05.02, can put on Light to add sense or full if you want to reset look
StockRosie_DamagedTrev2.05.02.zip
Stock Espresso look & feel
Resets strait lockbar, resets custom statusbar & gets to stock espresso look. Includes all htc widgets & apps. Flashable ontop of only 2.05.02, can put on Light to add sense or full if you want to reset look
StockEspresso_DamagedTrev2.05.2.zip
Full Mod Download (dont flash over lite, stanalone rom):
This is my full mod - best bet for starters.
-Espresso look (also includes 5screen modded launcher if you want to drop down to it with LWP)
-Nexus boot
-cleared lockscreen
-status bar mods
-black dialer
2.05.02 and higher include
-Gallery3d
-SprintNAV/SprintTV/
Latest Download:
DamagedTrev2.05.02.zip
older (just incase)
DamagedTrev2.05.01.zip
Addons to ANY of these Zips: (unless otherwise noted)
-Protected Apps fix: &postcount=321
-Another protected apps fix: &postcount=94
*Make sure market isnt running first. If recently ran and in doubt restart. Pushed to /system/app/ then ran marketenabler program on phone. Saved current settings, went to settings list tab. Long held on T-Mobile and went to fake provider. Searched market an now i see tiwdroid PRO paid & free (if thats a valid test). ---does this work for anyone else? I dont have the problem but ive always had goggles and such.
-Original Keyboard (instead of xda one included in 2.05.2) - &postcount=435
Themes
These should work with either 2.05.x or 2.0.x. These updates include just the modified files, no wipe should be needed.
-Original 'Full' Taskbar Skin with espresso look & cleared lock (see screenshots for full mod) FullTrevE_Taskbar_DamagedTrev.zip
- Full Taskbar addon for Bouncy Menus & fadein/out animations - &postcount=44
-MarksTheme Taskbar Skin with espresso look & cleared lock (FIXED EVDO/1x symbols- ported from ?t=576256) MarksTheme_Taskbar_DamagedTrev.zip[/URL]
-BuffDwang theme (ported from ?t=574139)
BuffDwang_TaskBar_DamagedTrev.zip
-Button Presses & more icons over at &postcount=431
-ADWon theme - (ported from ?t=641247) Fixed Location/Removed bottom blue line on statusbar
ADWone_TaskbarLightened_Damage.html - lightened version of taskbar
-Darkstar theme (in progress in this thread ?t=657562) - darkstar_try2_treve.zip
-Darkstar V2 - Download TrevE_DarkstarFixed.html
Download: http://www.4shared.com/file/258799078/ad9bcb23/TrevE_DarkstarFixed.html
-BlackIce Theme (in progress)
-AlienAqua Theme (in progress)
-Brocks Taskbar - (ported from here) - Brocks_Taskbar_DamagedTrev.zip
-Black Dialer: BlackDialer_DamagedTrev.zip
-DarchVader Dialer (ported from ?p=5946362&postcount=1092) DarchVader_Dialer_DamagedTrev.zip
-Black Droid launcher (looks like modified version of sense, might need those addons?) &postcount=248
-DaftControl bootscreen - &postcount=296 & &postcount=302
-ive had better luck with 1.60 wifitether instead of pre3 included in the full rom. get wireless_tether_1_60_htc.apk from http://code.google.com/p/android-wifi-tether/
------------------------------------------------------------
INFORMATION FOR OLD ROM -- STUFF IS DOWN HERE FOR A REASON, DONT MIX & MATCH THIS WITH NEW ROM
This is based off of damages DamageControl v2.0r2 Rom (showthread.php?t=653222) Seems to be the most functional 2.1rom, thanks alot damage
Damage v2.0r2 LIGHT
DamagedTrev_v2.0.1_LIGHT.zip
DamageTrev v2.0r2 Sense & all htc widgets (stock look, flash this over ONLY 2.0r2 light)
StockRosie_DamagedTrev.zip
DamageTrev v2.0r2 Espresso Sense & all htc widgets (stock look, flash this over ONLY 2.0r2 light)[/B]
StockEspresso_DamagedTrev.zip
FULL:
Few apps removed amazonmp3, htcfootprints & stocks
4shared: http://www.4shared.com/file/250930111/bd82c60a/DamagedTrev_v201.html
Megaupload: http://www.megaupload.com/?d=K13E9OMD
Issues/fixes for old rom
-In full Sense versions Somethings busted with HtcFacebook.apk. If you try to enable it youll get a permasync icon on top. (Try Update zip in addon section, worked for me)
-If your stuck 'permasyncing' without original htcfacebook just go into sync settings and uncheck everything then check them one by one. I ran across that once while i was flashing & seemed to fix it.
-If you have battery issues first check that the sync icon is not permanently on. Facebook update seems to be fixing issues for some try this first
-Maps Multitouch - &postcount=112
-Facebook Fix (Worked for me, took a bit to sync) - Facebook_DamagedTrev.zip
-Sprint Apps: SprintTV/SprintNavigation/NFL/Nascar- SprintApps_DamagedTrev.zip
-cyanogen launcher, nexus launcher, a2sd, and lwp's (anyone confirm?) &postcount=67
-HTCLockScreen('fix' for broken lockscreen in light): http://www.4shared.com/file/251619547/7e769a2d/HTCLockScreen_DamagedTrev.html
TrevE said:
This is based off of damages DamageControl v2.0r2 Rom (showthread.php?t=653222) Seems to be the most functional 2.1rom, thanks alot damage
Tweaks:
-Memkiller tweaked:
cat /sys/module/lowmemorykiller/parameters/minfree - 1536,3072,4096,21000,23000,25000
-Working Apps2sd
-Wifi works
-Espresso look
-Superuser permissions fixed
-Nexus boot
-cleared lockscreen
-status bar mods
-black dialer
Few apps removed amazonmp3, htcfootprints & stocks
I didn't wipe coming from a legend rom but YMMV. Nandroid first.
Download: http://www.4shared.com/file/250930111/bd82c60a/DamagedTrev_v201.html
Click to expand...
Click to collapse
can you see the text in contacts? cause i have a problemn with dc 2 with the background beeing black
This should be the thread for all Damage 2.0r2 mods from here on out. You should change the title to something like "ALL Damage 2.0r2 MODS"
Sure would cut down on pollution in the main forum
apatcas said:
can you see the text in contacts? cause i have a problemn with dc 2 with the background beeing black
Click to expand...
Click to collapse
seems to work
very nice
#@!#[email protected]! YEAH. ty trevE..
i tryed all day and could not get superuser to work..
and apps2sd really?? like you are sure??
um... ty, i just went back to 1.5 because this rom was pissing me off.
feefeeboomboom said:
#@!#[email protected]! YEAH. ty trevE..
i tryed all day and could not get superuser to work..
and apps2sd really?? like you are sure??
um... ty, i just went back to 1.5 because this rom was pissing me off.
Click to expand...
Click to collapse
pretty sure, it picked up all my stuff, heres a screenshot showing the symlinks in adbshell
Omg man! The oooooonly reason i want upgrading from dv1 was cuz no memkiller or espresso.
can i ask one favor? Can i link you too a window transitions/bouncy menu file, and you could port the zip over to fit?
You have AT LAST completed my hero thaaaankyou!
mountaindont said:
Omg man! The oooooonly reason i want upgrading from dv1 was cuz no memkiller or espresso.
can i ask one favor? Can i link you too a window transitions/bouncy menu file, and you could port the zip over to fit?
You have AT LAST completed my hero thaaaankyou!
Click to expand...
Click to collapse
Ill give it a shot
now if you can just get the market fixed ill be sold...
jerrygon said:
now if you can just get the market fixed ill be sold...
Click to expand...
Click to collapse
whats wrong with market? ive downloaded updates..
Protected apps not showing...
TrevE said:
whats wrong with market? ive downloaded updates..
Click to expand...
Click to collapse
TrevE said:
This is based off of damages DamageControl v2.0r2 Rom (showthread.php?t=653222) Seems to be the most functional 2.1rom, thanks alot damage
Tweaks:
-Memkiller tweaked:
cat /sys/module/lowmemorykiller/parameters/minfree - 1536,3072,4096,21000,23000,25000
-Working Apps2sd
-Wifi works
-Espresso look
-Superuser permissions fixed
-Nexus boot
-cleared lockscreen
-status bar mods
-black dialer
Few apps removed amazonmp3, htcfootprints & stocks
I didn't wipe coming from a legend rom but YMMV. Nandroid first.
Download: http://www.4shared.com/file/250930111/bd82c60a/DamagedTrev_v201.html
Click to expand...
Click to collapse
sorry didnt read on my phone
Sorry if this is a noob question, this is my first custom ROM install.
I followed the rooting instructions here: ttp://forum.xda-developers.com/showthread.php?t=583291
I booted into recovery, installed from the zip, and rebooted.
The nexus one boot up screen was up for a while, then it just froze. Did I do something wrong?
meatballz said:
Sorry if this is a noob question, this is my first custom ROM install.
I followed the rooting instructions here: ttp://forum.xda-developers.com/showthread.php?t=583291
I booted into recovery, installed from the zip, and rebooted.
The nexus one boot up screen was up for a while, then it just froze. Did I do something wrong?
Click to expand...
Click to collapse
try to wipe first, then flash the zip
http://www.4shared.com/file/242132849/dc90daa3/FreshlyGutted.html
Thanks so much man!
meatballz said:
Sorry if this is a noob question, this is my first custom ROM install.
I followed the rooting instructions here: ttp://forum.xda-developers.com/showthread.php?t=583291
I booted into recovery, installed from the zip, and rebooted.
The nexus one boot up screen was up for a while, then it just froze. Did I do something wrong?
Click to expand...
Click to collapse
Make sure you give it enough time, it normally takes a while the first time.
Awesome! Anyway to just get the dailer? Keep up the good work man!
wipe everything in recovery mode and reinstall...I do mean all the options to wipe..
TrevE said:
try to wipe first, then flash the zip
Click to expand...
Click to collapse
When I go to wipe in recovery mode there's a few different options. Wipe data/factory reset? Wipe SD:ext partition?
Which one do I select?
Thanks for the help
Data/Factory reset
I took the ED2 ROM, deodexed and zip aligned it, then debloated it and added in a few useful things. This has most of the stuff removed that came with the Stock ROM, including TWLauncher, which has been replaced with AOSP Launcher. The ROM is rooted and also includes busybox for some useful linux tools. I've also included the Gingerbread keyboard from here as another keyboard alternative. This is not fully tested yet, so there may be a few issues. As people use it, I can add things people would like (such as mods as they become available), or remove stuff people don't want/use.
Changelog
0610
Added some APKs back in
Fixed read-only USB mounting read-only on custom kernels (thanks kejar31)
0609
Moved to EE4 files
ROM is rooted and Deodexed
Browser is still with stock bookmarks (working to remove)
AOSP Lockscreen needs readded
Battery full notification will be back as well
Updated busybox
0606
Added SpareParts
Replaced TW Clock with AOSP Clock
Removed bookmarks from Browser.apk (may need to wipe browser data to remove them)
Disabled full charge notification (I think)
Removed some more apks that probably aren't needed
0527
AOSP Lockscreen from nitsuj17
Added stock Email back
Removed unneeded apks from v3
0523
Initial Release - Based on ED2 OTA
Deodexed
Zip-aligned
Debloated (removed to much to list, >70MB)
Rooted - fixed in 0523v2
Busybox
Gingerbread Keyboard
Text Messaging fixed in 0523v3
Download - 0610 v4.2.1
Extras
MediaHub
Visual Voicemail
Old versions
Download - 0609v4.2
Download - 0606 v4.1
Download - 0527v4
Download - 0523v3
Download - 0523v2
Download - Initial Release
Click to expand...
Click to collapse
So, I've already got the voodoo lagfix from jt1134 on my Charge, would using this mess that up?
Oh and thanks for the work you've done!
beautiful... will try in a few.
thank you!!!
No, you will need to flash this via the CWM that he posted.
I'm also trying to get "Go Back" into CWM, as well as releasing a kernel posted soon.
Fixed the Root issue with v2
imnuts said:
Fixed the Root issue with v2
Click to expand...
Click to collapse
thank you sir!
Could we flash jt's v4 kernel over this rom Since root is working on it?
imnuts said:
Fixed the Root issue with v2
Click to expand...
Click to collapse
Neeevermind... thanks nuts.
Nuts your awesome. Thank you
On another note does anybody know how to boot straight into recovery?
Sent from my SCH-I510 using XDA App
My man, thank you sir, donation on the way as promised...
Manjews said:
Nuts your awesome. Thank you
On another note does anybody know how to boot straight into recovery?
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
You can use the three button method "VolUp-VolDown + Power" Release power when the Samsung logo appears.
Or
Use Quick Boot from the Market, works for me.
Quick questions, can this be flashed over voodoo?
Do I have to do a wipe first?
Thanks bud.
Poloasis said:
Use Quick Boot from the Market, works for me.
Click to expand...
Click to collapse
I'd actually use "Reboot Button" since it also manages the Voodoo lagfix file...
Ill be all over this later on tonight, Thanks IMNUTS
Let the fun begin
Poloasis said:
Quick questions, can this be flashed over voodoo?
Do I have to do a wipe first?
Thanks bud.
Click to expand...
Click to collapse
Same question as above, I just installed voodoo's kernel. Do I just boot into CWM and then install as a .zip?
This can be flashed regardless of what kernel you're on, as long as you have CWM available. You can choose to wipe cache/dalvik if you want, but it isn't necessary from my experience.
If you were on stock and had an update for My Verizon, you may need to use Titanium Backup to finish removing it as I found out. The same likely goes for any other apps that were in stock but were updated from the Market.
I'll start removing more things then as I figure out what it is they do and if they are necessary for normal use of the phone. There are some apks left that I'm not sure what they do yet, so I'm leaving them in for now.
If you keep the media hub, you should probably revert it to ED1 so the can't play on 3G "feature" is gone.
imnuts said:
This can be flashed regardless of what kernel you're on, as long as you have CWM available. You can choose to wipe cache/dalvik if you want, but it isn't necessary from my experience.
If you were on stock and had an update for My Verizon, you may need to use Titanium Backup to finish removing it as I found out. The same likely goes for any other apps that were in stock but were updated from the Market.
I'll start removing more things then as I figure out what it is they do and if they are necessary for normal use of the phone. There are some apks left that I'm not sure what they do yet, so I'm leaving them in for now.
Click to expand...
Click to collapse
wondering if you can look into what the application Keytrace 2.2.1 is for i see it in titinam backup
I'm gonna be the guy who ask whats needed to put tw back on here. I already dropped the tw30launcher.apk back in system/app but its not recognizing it.
Sent from my SCH-I510 using XDA Premium App
Ok so after installing this im no longer able to send sms messages anyone else having this issue?
Sent from my SCH-I510 using XDA App
Platypus Dev Team Presents our First Project, with much more to come.
This ROM is a Touchwiz ROM Based on the Latest Update From Tmobile That Began rolling out on July 21st. The Update did contain many "bug fixes" according to Tmobile. Well, Sduvick and I (PDT) have been working with this update for the past few weeks to make one of the fastest and most stable ROM build yet. This ROM has the perfect little mix of KD1 and many modifications in it to make performance on the phone Optimal.
ROM INFO:
Based on a mix of KG2 with a mix of KD1
Rooted with Latest (SuperUser) with modified Recovery
KD1 Modem
Bali 2.2 KG2 Kernel
Custom Theme By Me Inspired By MIUI
Custom AOSP'ish Pull down Notification bar
Fully Deodexed - Optimized - Zipaligned
Honeycomb and Gingerbread Binaries, increasing touch response and smoothness
ALL Apps up to date
All app icons themed
Some Apps Themed
Custom Font
Transparent Dialer, CallLog, + Swipe to Call/Message in Call log like in messages.
Custom boot Animation + Sound
Custom Shutdown Animation + Sound (VERY Cool)
Light ROM packaged at 187MB
Debloated to the Same Extent as my previous ROMs
AOSP Lockscreen (Optional, Separate flashable.zip due to Rotation issue's)
Extended Power Menu - Thanks Sduvick!
Latest and some Custom Tweaks for best Stability and Smoothness.
Build.prop Tweaks
Additional Info:
2 Launcher Included - LauncherPro and the LATEST Touchwiz 4.5 Launcher by FR4gg0r with "M" Theme (Now Stable, except when landscape is enabled landscape may look a bit buggy)
3 Keyboards - Swype, Samsung, And Gingerbread (Blackout)
MIUI Analog Clock widget, 2 addtional Digital Clock widgets.
AOSP video player, AOSP music player with working controls in the Notification Bar + Lockscreen
Additional useful apps - Battery Calibration, Home Switcher, Quick Boot, Spare Parts, Voodoo Control.
Themed Widgets - Settings Toggle, Google Quick Search
Working Voice Recorder and Voice Dialer accessible from the app drawer
30+ ScreenShots HERE
Code:
[SIZE="5"][COLOR="Red"]Add-Ons:[/COLOR][/SIZE]
[COLOR="RoyalBlue"][SIZE="4"]Lockscreens:[/SIZE][/COLOR]
AOSP Lockscreen *[COLOR="Red"]breaks auto-rotation[/COLOR]* -[URL="http://www.multiupload.com/OF7ACF8TKH"]AOSPLock[/URL] - [URL="http://forum.xda-developers.com/showpost.php?p=16445109&postcount=43"]Screenshot here[/URL]
Puzzle Lockscreen *[COLOR="Red"]breaks auto-rotation[/COLOR]* -[URL="http://www.multiupload.com/HNUKNHMHBK"]PuzzleLock[/URL]
Sidekick Lockscreen(Revert) - [URL="http://www.multiupload.com/0OLJUC7M97"]SidekickLock[/URL]
[SIZE="4"][COLOR="RoyalBlue"]Battery Mods:[/COLOR][/SIZE]
Smooth Maximus X Accurate Battery Mod [[COLOR="Red"]FIXED[/COLOR]] - [URL="http://www.multiupload.com/UQCWP3GWOK"]TouchMIUI_AccurateXbatt.zip - [URL="http://forum.xda-developers.com/showpost.php?p=16474700&postcount=137"]Screenshots here[/URL][/URL]
Stock TouchMIUIwiz Framework Only - [URL="http://www.multiupload.com/AILQFTPB4W"]TouchMIUI_Stock Framework.zip[/URL]
[SIZE="4"][COLOR="RoyalBlue"]Apps:[/COLOR][/SIZE]
Stock Sidekick Dialer - [URL="http://forum.xda-developers.com/showpost.php?p=16474672&postcount=136"]Attached to this post[/URL]
Tmobile Backup (for tmo contacts) Flash in CWM - [URL="http://www.multiupload.com/UW27CZW8XF"]Tmobile Backup[/URL]
Code:
[COLOR="Red"][SIZE="5"]Changelog:[/SIZE][/COLOR]
[B]v3.0:[/B]
Re-built completely on KD1
Minor Framework Changes
Aosp in-call dialer clone
Build.prop updated
All apps updated
Newest Market
Browser Renamed to Browser from Web
Hosts Updated (ad-free)
Scripts and Tweaks all updated
Silent+Vibrate Volume Rocker Tweak Added
Battery full notification Removed
Usb Debugging notification Removed
Replaced Blackout GB Keyboard with Stock 2.3 GB Keyboard
Phone Fix included
Galley Bug Fixed
Power Menu Header Removed (Text much more visible)
Added Huge Selection of MIUI Wallpapers
...may be forgetting little things
[B]v2.0:[/B]
[KD1-KG2] Rebuilt on KD1 for Stability and Speed Reasons (Still has ALL KG2 Features)
Back to KD1 Bali
Changed some scripts to increase EXT4 (voodoo) performance and battery life
All Tweaks Now enabled by Default !
Removed TW4 launcher - [URL="http://forum.xda-developers.com/showthread.php?t=1061883"]Find it in the Original Thread[/URL]
[B]v1.1:[/B]
Alarm silent and sound icons bug fixed
Extra button over delete key in dialer bug fix
-Added Ext4 Optimization
Download Link: TouchMIUIwiz v3.0
v2.0 Calltone Fix [Non-wipe] Flash in CWM PhoneFix
Installation method is still the same, if you dont know/forgot its in the THIRD POST
Below you will find a Barebones Remix, With some additional apps Removed + more coming. Be sure to thank my partner Sduvick below !
Thanks all and Enjoy the ROM. Please post feedback as usual.
REMIXES
Barebones Remix V3.0: http://www.multiupload.com/G3RNGFW2S0
The barebones remix was an idea we came up with for those like me, who instantly remove a bunch of apps included in a ROM right after flashing it. This version includes the same features as the original, just has most of the non-necessary apps. Pretty much anything that can be downloaded from the market is removed, here's a removed apps list from tylermaciaszek (Thanks!)
http://forum.xda-developers.com/showpost.php?p=16488262&postcount=145 &
http://forum.xda-developers.com/showpost.php?p=16488296&postcount=146
com.nema.batterycalibration-1.apk
DigitalClockWidget.apk
GingerbreadKeyboard.apk
install_flash_player.apk
Maps.apk
MiuiMusic.apk
Music.apk
MusicWidget.apk
QuickBoot.apk
SpareParts.apk
TW4Launcher.apk
widgetdigitalclock.apk
YouTube.apk
Click to expand...
Click to collapse
Issues
Current Issues:
Pop3 Accounts cause FC sometimes (Pending)
gallery images not deleting (pending)
Resolved Issues:
Media Scanner not Running on Boot: Fixed by sduvick & ayoteddy, flashable zip fix http://www.multiupload.com/TQRZPPP411
Phone FC's when Status Tones on - fixed, nowipefix in OP as well as implemented.
Microphone button FC's Messaging app in Barebones - fixed by sduvick- I failed, removing voice search broke it. readded to barebones
Battery Icon sticks at 100% -fixed by ayoteddy - updated link
Alarm volume silent icon is wrong - fixed by ayoteddy - implemented in v1.1
Extra button over delete key in dialer - fixed by sduvick - implemented in v1.1
Issues with Music app FC's - Not actually an issue, caused by restoring nandroid
Images don't delete from gallery until rebooting - caused by restoring nandroid
Requests List
Cyanogen/aosp style dialer (pending)
Completed requests:
Blue Honeycomb battery - completed by Ayoteddy - in Addons section
Stock Framework - completed by Ayoteddy - in Addons section
Puzzle Lockscreen Package - completed by Sduvick - will be added to Addons, see page 14 for current link
Vibrate and Silent Rocker (Completed, See tweaks thread)
Instructions - NOTHING NEW, if you know the drill then go ahead and install.
- Put zip file in your /sdcard
- Reboot into cwm recovery
- Wipe Data/Factory Reset
- Wipe Cache Partition
(Optional but recommended to prevent any minor issues)-Wipe Dalvik Cache from advanced menu in CWM
*Now before you Flash, Only if you are on the orange CWM, (Not RED voodoo CWM from Bali) if on red CWM ignore the mounts/unmount part*
MAKE SURE YOUR MOUNTS LOOK LIKE THIS: (Go to mounts and storage from CWM recovery)
UNMOUNT CACHE
MOUNT DATA
MOUNT SDCARD
UNMOUNT SYSTEM - this is the ONLY mount you pay mind to, not Sdcard or anything else
Click to expand...
Click to collapse
- Now its safe to Flash the .zip
(AGAIN IGNORE UNLESS IF YOU ARE ON A RED VOODOO RECOVERY) after you flash, go back to mounts and storage and make sure your mounts look like this
UNMOUNT CACHE
MOUNT DATA
UNMOUNT SDCARD
UNMOUNT SYSTEM
(Optional but recommended)-Wipe Cache then Wipe Dalvik Cache from advanced menu in CWM before Rebooting.
(To First Time installers, System Needs to be set to Unmount, though it would really be mounted. If you do Not do this you will have a softbrick and will have to ODIN to stock and start all over ....) Once you have Flashed a Custom ROM or Bali 2.2 Kernel you dont have to worry about mounts
Click to expand...
Click to collapse
AFTER THE ROM BOOTS, i Recommend letting it sit for about 5 mins without use so cache and stuff builds back up, then log into google from gmail/market or someway, let google sync for 5 mins then reboot again. then you will have your Sidekick 4G in the best state its ever been
Click to expand...
Click to collapse
Great Job Platypus Dev Team!
I'm really loving the ROM and seeing what the future brings from you guys.
best ROM for the device today!
great work man was looking foward to this downloading now
edite: does include the updated bali v1.1
and can i use supercharge on this or u dont recomend it?
and btw this rom is awesome great work
do you just flash the barebones package in recovery?
thanks
Tyler0309 said:
do you just flash the barebones package in recovery?
thanks
Click to expand...
Click to collapse
Barebones is not an additional package its the same ROM without some of the extra apps like the apps you could get in the market (battery calibrator, home switcher ect)
And you flash it like any other ROM
Sent from my SGH-T839 using XDA App
okay thanks
Datlilboricua said:
great work man was looking foward to this downloading now
edite: does include the updated bali v1.1
and can i use supercharge on this or u dont recomend it?
and btw this rom is awesome great work
Click to expand...
Click to collapse
This has the first version of the KG2 bali that sduvick made and I haven't tried supercharge on it but you could give it a shot and see how it turns out
Sent from my SGH-T839 using XDA App
Its smooh enough I don't think I need to use it
And this image the delete button is out of wack or is it suposeb to be like that
Sent From My Rooted Sidekick 4g XDA Premium App
Datlilboricua said:
Its smooh enough I don't think I need to use it
And this image the delete button is out of wack or is it suposeb to be like that
Sent From My Rooted Sidekick 4g XDA Premium App
Click to expand...
Click to collapse
i reported that to sduvick hes gonna try and fix it tonight
Ok cool didn't knoe that
Sent From My Rooted Sidekick 4g XDA Premium App
Looks fantastic! And smooth as butter! Great work guys, very impressive
Sick rom. I always have so many problem with TWlauncher though. lags a ridiculous amount.
Rhineramirez said:
Sick rom. I always have so many problem with TWlauncher though. lags a ridiculous amount.
Click to expand...
Click to collapse
i don't have any TW problems! I'm actually a huge fan of it now because of this rom
also is anyone else having a problem deleting pictures i delete but they stay there until the reboot
I also had that problem with pictures not deleting, I'll have teddy look into that the next time I talk to him. As far as the TW launcher goes, I don't use it, but it's possible that it still has some bugs, it was ported by Fr4gg0r and is a fairly recent release if I remember correctly.
Gallery issue has been added to the issues list.
I wanted to say great work on the ROM you guys, I'm really liking the look, looks classy and 'professional', and running smooth so far! excellent work
Sent from my SGH-T839
I'm getting a force close on android.process.media when entering an exchange account (when I'm trying to enter numbers) and when trying to pick an alarm notification. Can anyone confirm if it's just me?
xmeatizmurderx said:
I'm getting a force close on android.process.media when entering an exchange account (when I'm trying to enter numbers) and when trying to pick an alarm notification. Can anyone confirm if it's just me?
Click to expand...
Click to collapse
doesnt happen to me..
I'm not getting any force close on entering an Exchange account, which field are you adding numbers in?
I'm also not finding any FC in the alarm notifications, did you try wiping the Dalvik-cache after you flashed, if you restored your data?
Hi Guys,
Here I present the first fully functional MIUI beta build.
A word of caution:
This is a port and not a custom stock rom. This is a beta release. It means the build is stable but there are a few known issues. Keep reading for the list of known issues.
About the Rom:
MIUI port based on deodexed Austrian rom.
Kernel - Ardatdat v4.2beta6 1.32G
What MIUI offers:
MIUI may not be as fast as cyanogenmod but offers a lot in terms of eyecandy, not to mention the unlimited range of themes that can make your phone look like iPhone, like HTC Sense UI and many many more custom themes, just with a button click.
The ease with which you can handle all securities like permission, call filtering etc in MIUI is great.
All in all it a different experience altogether.
What works:
Almost everything
Some theme related Issues: (Theme are in general very usable, feel free to go ahead and enjoy MIUI themes, these are minor issues)
1. On first boot after the installation the wallpaper is not properly alligned. Reboot solves the issues. I forgot to change the stock ICS wallpaper, but you guys can do it youself
2. Lockscreen lags - still unable to fix this but a lot of lockscreens from the themes work faster than default miui lockscreen. Try them out.
3. There is a strange issue where after applying a few themes, lockscreen does not work. It seems like a screen freeze but infact its not. its just that the lockscreen wallpaper does not draw onto the screen. If you scroll over the expected place for the lock screen the screen unlocks and everything works fine. Solution for this could be to not use the theme at all or to use a seperate lockscreen under mix tab. It actually happens because the developer made references to certain image files but are not used in the theme. I think its a mistake by the developer of the theme but ideally we should we able to bypass such scenarios and load the screen anyway. I am working on the same. Please note, it happens for very few themes, themes in general are still very usable.
Note:- Always apply themes without font when promted. This will happen when themes contain fonts. Font changes have been disbaled not only on our patchrom but also on galaxy S2 as well. I guess its a general problem.
The worst: If at all you manage to screw up with the themes and render the system unusable, no need to wipe data. Go to recovery and just delete /data/system/theme folder with adb
Help me make MIUI rom better:
I still need testers to improve this rom. Please feel free to report issues
A logcat, if possible, is always helpful.
My sincere thanks:
To fuss132 and ronak.super for introducing me to the concept of MIUI patchrom. I always thought it was an AOSP thing only :good:
To ardatdat coz i am using his kernel.
To TheFrankenstain, I used his rom as base for a deodexed stock rom.
To chandanbs, hasanjaved, parmarket and all others who reported issues and helped me improve this rom.
Link to the rom:
v1.0
http://db.tt/WT4zSZA5
(Thanks hors_sergio for uploading)
v1.1
http://d-h.st/FoT
How to install:
1. Wipe data / factory reset, wipe cache,dalvik cache.
2. Flash the rom.
3. Flash gapps from here.
http://www.2shared.com/file/A9nNU4Fl/gapps-ics-20120317-signed.htm[/B]l
I recomment not to wipe data / factory reset from cwm or from within the rom after flashing the rom. But if you did and now stuck on boot animation, open CWM and just flash the RestoreMIUI zip from below. This can also be used, if one of the themes messed up your system and you can no longer get the system to boot. No need to wipe data again. Just flash the zip file
RestoreMIUI link:
http://d-h.st/EUQ
This is a full build. No need to apply any updates provided earlier
Note:
Wipe data will remove all your apps and data. Please make neccessary backups.
Please don't directly flash ardatdat kernel over this rom. I made modifications in init script to include miui framework jar and to enable custom bootanimations.
Last, flash at your own risk.
Happy flashing!!
CHANGELOG:
v1.1
Compiled with the latest MIUI patchrom code. Some apps added by default but most are relevant only for the chinese. This is again a full release and not an update. I had to be because I built using the latest MIUI patchrom sources.
Fixes:
1. Fixes the irritating sec MIUI, sec error dialogs. Now if some application crashes we get proper error message
2. LockScreen sound lag fixed. Some lockscreen still lag if you turn screen off and on immediately. But we dont get the default ICS screen anymore. It gives the current wallpaper now. Overall the lag feel a little better.
3. Themes fixed in dialer where background texture were not displayed correctly. Some theme lockscreens will still not work. But most of these themes are not formed correctly becuase I keep getting missing images in the logs and the images are actally missing in the theme package. Maybe there's a workaround somewhere but I can't solve it for now. So lets live with it
4. PIN unlock works now.
5. MIUI backup seems to be working fine now. No issues with Contact backups
6. Tried to fix SIM import issue. Can someone test. My sim card is empty.
7. Can now play mp3 by clicking on it within fileExplorer. I guess it wasn't working earlier.
8. Lot of other small fixes.
v1.0 beta
Fixes:
1. Now no more FC/restarts on App error messges. However, still need to see why we get sec MIUI and sec and not more meaning error messages
2. USB mass storage works now.
3. FC/restart on volume up/down when screen turned off fixed
4. Themeing fixed (most themes working)
5. Added support for custom boot animation (Thanks to freeza from Galaxy III forum for the wonderful article on changing bootanimation and to wanansmile coz I used his trick to stop boot animation)
6. Root and Permission issues fixed
7. Improper shutdown messages fixed
8. App storage calculation fixed. Now you can clear data, clear cache for particular apps.
9. Added support for move app to Usb Storage
10. Fixed no multiple call rings issue
11. Fixed Browser image downloading app Error issue
v0.1
Initial alpha build
A general tip : Sometimes when I change something in settings, it doesn't get saved. Must do it 1-2 more times and it works. If you click on the text for a setting toggle and not the toggle itself, it works a lot better. Probably its meant to be used this way. You get a sound when changes are applied. I cound enable voodoo smart amplifier too when clicking on the text. I can't fix it coz I dont get any errors in logs when clicking the toggle itself.
So do all device functions work ? Like Network, WiFi, Data, Camera, FM, all bundled apps etc. ?
dragosh01x said:
So do all device functions work ? Like Network, WiFi, Data, Camera, FM, all bundled apps etc. ?
Click to expand...
Click to collapse
Network, WiFi, Data, Camera - Yes
FM - App opens fine, did not test
all bundled apps - They work, but you may get some launcher restart issues with some apps.
It'll be better if some screenies will be added to op.
Sent from my Galaxy Royale using Tapatalk 2.
Finally we got it....:victory:
Thanx buddy...:good:
xlm13x said:
It'll be better if some screenies will be added to op.
Sent from my Galaxy Royale using Tapatalk 2.
Click to expand...
Click to collapse
Dammit. I did take some sceenshots. Just forgot to put them in OP. Thanks for reminding.
Miui is a aosp based custom rom so it requires different kernel than stock to run. So I have some questions.
1. Can u plz tell what kernel u have used?
2. Is there are some kernel related extra function?
3. Have u removed secured erase? If not data wipe can lead to known emmc super brick.
Sent from my Galaxy Royale using Tapatalk 2.
Please give some info about the kernal. Can we use latest Ardatdat updates? Do I have to flash Australian ROM first to flash MIUI? I am currently on Angeeks custom rom over Nordiac.
xlm13x said:
Miui is a aosp based custom rom so it requires different kernel than stock to run. So I have some questions.
1. Can u plz tell what kernel u have used?
2. Is there are some kernel related extra function?
3. Have u removed secured erase? If not data wipe can lead to known emmc super brick.
Sent from my Galaxy Royale using Tapatalk 2.
Click to expand...
Click to collapse
Its based on custom stock rom buddy and uses ardatdat kernel. But you can't directly flash ardatdat kernel coz I made init script changes.
I am not sure if you need to flash Austrian rom first. Do it if you want to play safe or maybe you can try directly. I think it should work since you are wiping data. Do let us know the outcome if you choose to try it.
shaheen7m said:
Please give some info about the kernal. Can we use latest Ardatdat updates? Do I have to flash Australian ROM first to flash MIUI? I am currently on Angeeks custom rom over Nordiac.
Click to expand...
Click to collapse
Sent from my GT-I9103 using xda app-developers app
Downloading. Report if I notice bugs.
will take a damn lot of time as I have slow connection
Sent from my Galaxy Royale using Tapatalk 2.
parajsinghal said:
Its based on custom stock rom buddy and uses ardatdat kernel. But you can't directly flash ardatdat kernel coz I made init script changes.
I am not sure if you need to flash Austrian rom first. Do it if you want to play safe or maybe you can try directly. I think it should work since you are wiping data. Do let us know the outcome if you choose to try it.
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
Buddy, It would be great if you can make an FAQ in OP so that many questions can be answered in a single shot. And please mention the kernal version too. I am not able to flash atm, have to look into it tonight:good:
Screenshots:
Problem: MIUI themes not working After applying any themes - FC...
Awesome work man! I'll download and use it for sure!
alfONES said:
Screenshots:
Problem: MIUI themes not working After applying any themes - FC...
Click to expand...
Click to collapse
Thanks buddy
parajsinghal said:
Its based on custom stock rom buddy and uses ardatdat kernel. But you can't directly flash ardatdat kernel coz I made init script changes.
I am not sure if you need to flash Austrian rom first. Do it if you want to play safe or maybe you can try directly. I think it should work since you are wiping data. Do let us know the outcome if you choose to try it.
Sent from my GT-I9103 using xda app-developers app
Click to expand...
Click to collapse
If you can, apply your mods to all latest (1G and 1.32G) versions of ardadat kernels and add them to OP.
Wow... a working miui! I love you guys!
Can I flash this directly over the maZel II rom, or should I make a clean setup?
Gesendet von meinem GT-I9103
hors_sergio said:
Wow... a working miui! I love you guys!
Can I flash this directly over the maZel II rom, or should I make a clean setup?
Gesendet von meinem GT-I9103
Click to expand...
Click to collapse
Better wipe, install austrian ICS, latest CWM, flash MIUI and any other stuff you want to (like MBB mod), and fix permissions before rebooting.
while granting SU permissions, device freezes and reboots.
after reboot pop-up appears asking SU permissions and accepting it or declining it both freezes device and reboots.
i m unable to provide logcats as phone is not being detected in adb.
also i m unable to use adb, device is not being detected.
dragosh01x said:
Better wipe, install austrian ICS, latest CWM, flash MIUI and any other stuff you want to (like MBB mod), and fix permissions before rebooting.
Click to expand...
Click to collapse
Thanks for the fast reply
I will try this today in the evening
Btw... is cwm 5.5.0.4 okay to flash it?
Official Jellybean is Finally Here for the Skyrocket!
Quotes From AT&T
Some of the Enhancements in the new Jelly Bean Update:
- Buttery Smooth Performance & Great Stability (Thanks to Project Butter)
- Full User Interface Revamp (Same UI as of the Galaxy S III and Galaxy Note II)
- TouchWiz Nature UX
- Samsung’s S Cloud services
- Improved Camera features
- New Lockscreen With Many Customization Options
- New Features like Direct Call, Smart Stay and Pop-up Play
- New Widgets (From Galaxy S III)
- 2 Home screen modes
- New Notification bar With More Notification Toggles
- Google Now
- STOCK and not Debloated so beware
Main Differences From Rogers Release
The Rogers Release Has
* Only One Carrier App – Rogers My Account
* RAT Unrestricted Radio that lets you select GSM/WCDMA/LTE, GSM/WCDMA, GSM, WCDMA
* Same Stock Wallpapers that are used in the Galaxy S III
* 3 Shortcuts for Apps on the Lockscreen
Compatible with UCLL3 and Rogers JB RUXUMAY7 Radio's
Information about the firmware:
Android 4.1.2
PDA I727UCMC1
CSC I727ATTMC1
http://www.hotfile.com/dl/202308505/636f364/I727UCMC1_I727ATTMC1_XXX.zip.html
For Mohan's Odexed/De-Odexed Version that can be installed from CWM or TWRP Go here http://forum.xda-developers.com/showthread.php?t=2228486
Install with ODIN 3.0.7
Thanks to Crackerpie for the Upload to hotfile and to Samsung for making the firmware but make sure to Wipe Data, Cache, Dalvik Cache Prior to using the ODIN Tool to Avoid Bootloop
Prerequisites
Make a Full backup of your Data before attempting
Make Sure you have at least 50% Battery
Make Sure you have a Good Condition USB Cable
If Flashing From a Official ROM like the AT&T ICS
If you coming from a Custom Rom (ie CM10.1/AOKP/Embryo) it's best practice to Wipe Data/Factory Reset, Wipe Cache, Wipe Dalvik Cache to avoid bootloop
How to Install:
1. Download and unzip the file
2. Download and unzip ODIN
3. Turn Off the device and go to download by pressing and hold volume down + home button and the press the power button until the boot screen shows up.
4. Open Odin and connect your phone with your computer, it should be in download mode when you connect it with odin
5. Once your device is successfully connect of the odin port will go blue.
6. Click on ‘PDA’ and select file KIES_HOME_I727UCMC1_I727ATTMC1_844945_REV02_user_low_ship.tar
7. In Odin select ‘Auto Reboot' and 'Reset Time', Make sure no other boxes are checked
8. Now click the start button in Odin and let the installation process to start.
9. After installation is complete, your phone will restart when you see this unplug the phone from PC
In the Event you get a Bootloop After Flashing
1. Pull the Battery
2. Hold down Power and Both Volume Buttons to get into the stock recovery that was flashed with the Rom
3. Wipe Data/Factory Reset 3 Times, Wipe Cache 3 Times, and Wipe Dalvik Cache 3 Times and Reboot and it will work, it takes the Rom about 5-10 Mins to Settle after being installed so be patient.
To Root This Rom:
1. Download the latest TWRP Recovery Tar here
2. Open ODIN and click PDA and select the TWRP Tar and flash it
3. Download the latest SuperSU 1.25 From here
4. And Flash in TWRP and Boom your Rooted
Once you use Titanium Backup on it it's not a bad Rom but a I know once Mohan has a release it will really start to kick ass for someome who want's a stock based rom
Don't forget the bloat and spyware included.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
jd1639 said:
Don't forget the bloat and spyware included.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
Yes being AT&T we know it's full of crap but once Mohan gets his hands on it it will not suck
forrest89sei said:
The Official Jellybean update is finally here!
Some of the Enhancements in the new Jelly Bean Update:
- Buttery Smooth Performance & Great Stability (Thanks to Project Butter)
- Full User Interface Revamp (Same UI as of the Galaxy S III and Galaxy Note II)
- TouchWiz Nature UX
- Samsung’s S Cloud services
- Improved Camera features
- New Lockscreen With Many Customization Options
- New Features like Direct Call, Smart Stay and Pop-up Play
- New Widgets (From Galaxy S III)
- 2 Home screen modes
- New Notification bar With More Notification Toggles
- Google Now
- STOCK and not Debloated so beware
Information about the firmware:
Android 4.1.2
PDA I727UCMC1
CSC I727ATTMC1
http://www.hotfile.com/dl/202308505/636f364/I727UCMC1_I727ATTMC1_XXX.zip.html
Install with ODIN 3.0.7
Thanks to Crackerpie for the Upload to hotfile and to Samsung for making the firmware
Click to expand...
Click to collapse
Awesome! Thanks forrest. D/L now and gonna flash later to try it out.
Know that you'll lose root when you Odin.
forrest89sei said:
The Official Jellybean update is finally here!
Some of the Enhancements in the new Jelly Bean Update:
- Buttery Smooth Performance & Great Stability (Thanks to Project Butter)
- Full User Interface Revamp (Same UI as of the Galaxy S III and Galaxy Note II)
- TouchWiz Nature UX
- Samsung’s S Cloud services
- Improved Camera features
- New Lockscreen With Many Customization Options
- New Features like Direct Call, Smart Stay and Pop-up Play
- New Widgets (From Galaxy S III)
- 2 Home screen modes
- New Notification bar With More Notification Toggles
- Google Now
- STOCK and not Debloated so beware
Click to expand...
Click to collapse
What are the improved Camera features? I tried searching but I doubt anyone is going to put up the video review of this JB update.
Just installed and running great. Very smooth and very fast. Liking it a lot. Only issue obviously is all the AT&T bloat. Getting good speeds on the new radio, too! Thanks again, forrest!!
Altarocks said:
Know that you'll lose root when you Odin.
Click to expand...
Click to collapse
Yes but you can regain root by following these instructions
To Root This Rom
Download the latest TWRP Recovery Tar here
Open ODIN and click PDA and select the TWRP Tar and flash it
Download the latest SuperSU 1.25 From here
And Flash in TWRP and Boom your Rooted
Also don't forget the darn CIQ that att loves to put on their crap software
sent from Johnson's JB creation 4.2.2
Call quality is great. Running very well so far with no hickups. I'm surprised how smooth it is even with all the AT&T BS on it. Battery life seems pretty solid far. New radio is good, UCLL3 was a bit faster in terms of data speeds but regarding call quality this radio is great, probably the best. Thanks again, forrest.
Sorry For Noobness But Does this Have the Multiwindow feature also?
manu44 said:
Sorry For Noobness But Does this Have the Multiwindow feature also?
Click to expand...
Click to collapse
No, the multiwindow feature isn't on it.
manu44 said:
Sorry For Noobness But Does this Have the Multiwindow feature also?
Click to expand...
Click to collapse
Our screen is too small to make use of it anyways. It's pointless just like on screen nav buttons.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Zeebz said:
No, the multiwindow feature isn't on it.
Click to expand...
Click to collapse
Ahh Thats Sad.
manu44 said:
Ahh Thats Sad.
Click to expand...
Click to collapse
Don't care, it's pointless.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Impressions
Coming from Slimbean, here are my thoughts for those that haven't flashed yet:
-Lock screen functionality is missing (used to be able to swipe in different directions in the circle to launch different apps. There are shortcuts on the lock screen, but they dont' look nice. I installed widgetlocker to regain this functionality.
-The pop-up video feature is awesome. I usually use netflix, but if I put some videos on my phone, as a multitasker, it's very cool to be able to have them playing while I do other things on my phone
-I miss how everything was smaller in slimbean. Icons and the items in the notification bar are larger, so everything looks oversized.
-You can't remove items from the pull-down toggles and it takes up a lot of space (namely, brightness which even if you leave on auto, you have to look at every time you pull down the notification bar)
-The calendar is better. You can see events on the month view without drilling down into each day
-Can't customize the power menu. Although profiles weren't working in slimbean, they appear to have been removed altogether from the stock JB
That's all for now. It's not worth going back to slimbean at this point, since it's a stable rom and slimbean would at times crash. However, i do miss the smaller sizes of the notification icons and the ability to fully customize the toggles and the lock screen without 3rd party apps.
Dracarnion said:
Coming from Slimbean, here are my thoughts for those that haven't flashed yet:
-Lock screen functionality is missing (used to be able to swipe in different directions in the circle to launch different apps. There are shortcuts on the lock screen, but they dont' look nice. I installed widgetlocker to regain this functionality.
-The pop-up video feature is awesome. I usually use netflix, but if I put some videos on my phone, as a multitasker, it's very cool to be able to have them playing while I do other things on my phone
-I miss how everything was smaller in slimbean. Icons and the items in the notification bar are larger, so everything looks oversized.
-You can't remove items from the pull-down toggles and it takes up a lot of space (namely, brightness which even if you leave on auto, you have to look at every time you pull down the notification bar)
-The calendar is better. You can see events on the month view without drilling down into each day
-Can't customize the power menu. Although profiles weren't working in slimbean, they appear to have been removed altogether from the stock JB
That's all for now. It's not worth going back to slimbean at this point, since it's a stable rom and slimbean would at times crash. However, i do miss the smaller sizes of the notification icons and the ability to fully customize the toggles and the lock screen without 3rd party apps.
Click to expand...
Click to collapse
Thank you for the info! I'm on Embryo 5.4 at the moment (after flashing pretty much everything that moves for the skyrocket and finding that ICS is the most stable platform for my uses so far) I liked the stock UCLF6 but enjoy the extra customizations embryo gives me (plus the OC'ing)
I think I'll NAND and give this a whirl and see if I can get my ~500M free ram environment that I'm enjoying so much
I can't wait to see what comes out based on this release... Thank God the SkyRocket isn't a dev deadend!
What is the DPI setting for this rom? The default 240?
Thanks again for the info
You could root, change dpi, and flash a multi dpi play store to get your small fonts back.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Note that if you change the DPI, you'd also have to change the default launcher, as TouchWiz does NOT play well at all with DPI changes. You will get a ton of unusable space (last time I tried, anyway).
Stuck on bootloop
I downloaded the file and went through odin and when it got done with andy and the status bar it booted up but it is stuck on the AT&T globe. I made sure the file was finished writing from odin when I unplugged my phone.
WTF is wrong here? I even went back and tried to reload ICS through odin but it is stuck there also. I did not install the recovery for it yet for JB. Is that something I should try and clear everything out and try again?
Your help is appreciated, and thanks.
Jeff