Hello,
How can i root my transformer and install cwm recovery. I have the official firmware 9.2.1.17.
thanks
http://forum.xda-developers.com/showthread.php?t=1494230
searching is good.
Thank you,
I will try to root my "TF101" with Vipermod, I read that it was the only one who could root version 9.2.1.17.
Can i use the recovery installer made by gnufabio to install CWM recovery after ?
True, you can use this tool (and remember to use option-1) and it will root you. I did the same with my TF101 build C1O and v9.2.1.17 ICS ROM and successfully rooted it.
However the real problem lies after that. I have been trying hard the whole day to find a relevant cwm recovery for my device but unsuccessful so far. This is what I have done:
1) Download and install CWM ROM Manager
2) Download latest CWM Recovery using ROM Manager
3) Try creating back ROM - doesn't work (the Manager simply doesn't do anything)
4) Try getting into recovery mode by a) power + vol down button, then within 5 seconds, b) vol up button.
===> All I see is a dead android logo with a red triangle and exclamation mark. Some suggest that this is due to device not rooted but my device IS rooted.
5) Download this cwm recovery done by this kind person, into SD card: http://forum.xda-developers.com/showthread.php?t=1563249
6) Try 4 - but the same output as 4.
I'm kind of stuck - don't know what to do! If it works with you, please let me know!
Thanks!
Worked !!
Root with viper mod --> OK
Install CWM recovery --> OK
Reboot in recovery --> KO
so i have used an application called reboot2recovery and after i can go in recovery mode...
Now i am ready to flash a new rom
same problem for me!
exactly the same but the solution with this "Reboot to recovery" apk doesn' work.
any ather help and solution??
thanx a lot!!
marcodorcel said:
Root with viper mod --> OK
Install CWM recovery --> OK
Reboot in recovery --> KO
so i have used an application called reboot2recovery and after i can go in recovery mode...
Now i am ready to flash a new rom
Click to expand...
Click to collapse
A great and encouraging news - congratulations and thanks!
Are you talking about TF101? What version is it?
Did you download reboot2recovery from market?
TIA!
If you still have problems i can help, ihad the exact same problem as u all do at this point.........what you have to do to get to the recovery image is use an app called "Transformer reboot to Recovery" (HERE) with this app i was able to get to the recovery......i recommend flashing the touch version on cwm recovery so u dont mess up ur buttons (HERE)
if this helped hit the thanks button
bryuliro said:
If you still have problems i can help, ihad the exact same problem as u all do at this point.........what you have to do to get to the recovery image is use an app called "Transformer reboot to Recovery" (HERE) with this app i was able to get to the recovery......i recommend flashing the touch version on cwm recovery so u dont mess up ur buttons (HERE)
if this helped hit the thanks button
Click to expand...
Click to collapse
Downloaded and installed "Reboot2Recovery" Transformer edition.
ran the app...here's what I get:
===> Dead android logo with a red triangle and exclamation mark.
Running:
Build: IML74K.US_epad-9.2.1.17-20120312
Kernel: 2.6.39.4 [email protected] #1
Rooted using ViperMOD PrimeTime v4.5, option 1
any assistance would be great.
sytech55 said:
Downloaded and installed "Reboot2Recovery" Transformer edition.
ran the app...here's what I get:
===> Dead android logo with a red triangle and exclamation mark.
Running:
Build: IML74K.US_epad-9.2.1.17-20120312
Kernel: 2.6.39.4 [email protected] #1
Rooted using ViperMOD PrimeTime v4.5, option 1
any assistance would be great.
Click to expand...
Click to collapse
Have you install CWM recovery?
The Android with ! is your stock recovery.
Use RecoveryInstaller to install CWM first.
http://forum.xda-developers.com/showthread.php?t=1346180
Related
When I hold Power and Vol Down I get the text prompts, I hit Vol Up promptly and get the Android with gears turning animation for about 10 seconds, then get the Android with the warning triangle and can't go any further.
Any Suggestion? Tablet is a B80, rooted via Nachoroot. I have an SD card in the microSD slot.
I have Clockwork Mod (reboot into recover does a normal reboot) and Gnufabio's Reboot2Recovery (which ends with the Android and the warning symbol). It is my understanding that Rom Manager can't update the bootloader, so I haven't even tried.
Col.Kernel said:
I have Clockwork Mod (reboot into recover does a normal reboot) and Gnufabio's Reboot2Recovery (which ends with the Android and the warning symbol).
Click to expand...
Click to collapse
Are you sure you have CWM? Have you installed it?
When reboot to recovery doesn't load CWM is usually because CWM is not installed.
AzureusPT said:
Are you sure you have CWM? Have you installed it?
When reboot to recovery doesn't load CWM is usually because CWM is not installed.
Click to expand...
Click to collapse
Let me clarify. I have ROM Manager, and yes it's installed. I can't install a 3rd party Recovery because the bootloader is encrypted. It's a new Transformer (B80 s/n), not one of the older ones.
I am unable to boot into the stock recovery by any of the methods listed in the OP.
Col.Kernel said:
Let me clarify. I have ROM Manager, and yes it's installed. I can't install a 3rd party Recovery because the bootloader is encrypted. It's a new Transformer (B80 s/n), not one of the older ones.
I am unable to boot into the stock recovery by any of the methods listed in the OP.
Click to expand...
Click to collapse
ROM manager doesn't do anything for the TF. Just because you have ROM Manager install doesn't mean you have cwm recovery install.
You need to install CWM recovery as suggested by AzureusPT.
Go on the theme and app section and look for RecoveryInstaller. That will help you flash cwm.
Edit: here's the link
http://forum.xda-developers.com/showthread.php?p=19319421
baseballfanz said:
ROM manager doesn't do anything for the TF. Just because you have ROM Manager install doesn't mean you have cwm recovery install.
You need to install CWM recovery as suggested by AzureusPT.
Go on the theme and app section and look for RecoveryInstaller. That will help you flash cwm.
Edit: here's the link
http://forum.xda-developers.com/showthread.php?p=19319421
Click to expand...
Click to collapse
Thank you!!!!
Hi,
I use the tool root toolkit 0.8.3
I did "Backup & Root"
then Install "SU only"
then Install "touch recovery only"
I can't reboot in CWM -no app in ICS and no prompt when I close my tab and no cwm prompt appear when I push power + vol up or down....
how I can get this clock mod recovery ?
Best regard
Bankaiii
Volume down, then press power, then wait 3 seconds and press volume up.
If that doesn't work, try the PERI tool to get CWM.
Thing O Doom said:
Volume down, then press power, then wait 3 seconds and press volume up.
If that doesn't work, try the PERI tool to get CWM.
Click to expand...
Click to collapse
thanks to answer me, but now I installed "everything" I'm afraid to use 1 click tool.
Or I have to uninstall all to use 1 click safely.
I dont want have 2 tools installed for the same job.
Why there is no prompt to ask to reboot in cwm , its weird !
which difference between touch clockworkmod recovery v5.8.1.8 and cwm from 1 click aka PERI ?
Root Toolkit Problem
Yesterday I used the Toolkit to Root my Asus Transformer B70 i believe (sorry its not here with me). I followed all the steps and everything went fine. I then upgraded the CWM with Rom Manager, Rom Manager was granted SU Permission so i know the root is fine, however when i try to flash a new Rom (Cyanogenmod 9) it just reboots (not into recovery) and does nothing. i also find Superuser keeps crashing and i think it is when i go to flash the new Rom.
Any advice?
Rouge XM supports external storage. That's about it.
You can safely use PERI even after using the other tool.
adrian- ROM manager causes issues. Bad issues. See my warning in general...
PERI can also fix that, use the fix bootloop option.
and about "1-Click Transformer Root" - which difference ?
how I can know if Im rooted ?
Just use what you want to use. Everything works. 1ctr does root first then cwm. Mine does cwm then root.
oh my god ! it works
But I must confess one thing :
Windows try to install driver when I plug the Tab - so When I remove driver (from device manager) and reboot windows I have to click quicly on icon (green color in task bar) to ask to stop automatic install. Cause I already install your driver adb.
So I think automatic install driver from Windows is the main problem for many people try to root and put cwm.
Now Im under with PERI >> Rogue XM Recovery 1.5.0 (based v 5.0.2.8) !!!
Thanks !
which rom you advise me (this is next step
Whatever rom you like, I'm currently switching between AOKP and gummy :]
Stock based=
ARHD
Revolver
AOSP Based
Megatron/cm9
AOKP
Gummy
etc
I have a commtiva z71 variant- Videocon V7500 Evolve.
When I boot it in recovery it's stuck at the boot screen.
It's booting properly and is rooted to cm 7.1 (2.3.7).
I flashed cwm lot of times but no luck.:crying:
I am a new to android.
Please help!!!
So you can boot your phone normally, but you can't boot on recovery...hm and you said that you "flashed" CWM many times? Well then I'm going to give you an alternative way to install CWM recovery. So
1. Go in bootloop. Well I guess you know how but I will describe the way just in case. Bootloop is when the phone is on the loading screen with the hourglass. And to enter in bootloop usually (On my phone atleast) I have to hold down the "volume down" and the "End call button" Red one, and press the power up.
2. Connect your phone with your pc via usb.
3. Download the attached file below.
4. Extract the file you downloaded and navigate from pc in the "fastboot" folder. Double click the "install-recovery-windows.bat" file.
After doing these steps you should have CWM 5.0.2.7 ready to boot.
mojito0 said:
So you can boot your phone normally, but you can't boot on recovery...hm and you said that you "flashed" CWM many times? Well then I'm going to give you an alternative way to install CWM recovery. So
1. Go in bootloop. Well I guess you know how but I will describe the way just in case. Bootloop is when the phone is on the loading screen with the hourglass. And to enter in bootloop usually (On my phone atleast) I have to hold down the "volume down" and the "End call button" Red one, and press the power up.
2. Connect your phone with your pc via usb.
3. Download the attached file below.
4. Extract the file you downloaded and navigate from pc in the "fastboot" folder. Double click the "install-recovery-windows.bat" file.
After doing these steps you should have CWM 5.0.2.7 ready to boot.
Click to expand...
Click to collapse
It's probably a bad flash, he needs to wipe/factory reset and then flash a rom again.
d3ac0n_luna said:
It's probably a bad flash, he needs to wipe/factory reset and then flash a rom again.
Click to expand...
Click to collapse
Well I recommended this way because it is guarantee sucess since that's how I have installed all the revocery modes that have passed from my phone.
thanks
mojito0 said:
So you can boot your phone normally, but you can't boot on recovery...hm and you said that you "flashed" CWM many times? Well then I'm going to give you an alternative way to install CWM recovery. So
1. Go in bootloop. Well I guess you know how but I will describe the way just in case. Bootloop is when the phone is on the loading screen with the hourglass. And to enter in bootloop usually (On my phone atleast) I have to hold down the "volume down" and the "End call button" Red one, and press the power up.
2. Connect your phone with your pc via usb.
3. Download the attached file below.
4. Extract the file you downloaded and navigate from pc in the "fastboot" folder. Double click the "install-recovery-windows.bat" file.
After doing these steps you should have CWM 5.0.2.7 ready to boot.
Click to expand...
Click to collapse
Thanks for your help I will try it and inform you asap.
Earlier it was working properly but suddenly it stopped.
Sorry for late reply
I have another question that the link that you gave me is of cwm 5.0.2.7 but my phone supports cwm 2.5.1.3.
Hope to look for a positive reply.
Thanks again
D
What do you mean by "supports" ?
Which version of recovery you should install on your phone just has to do with what Rom you want to install, or to be more accurate which version of android your ROM has.
So you should install your recovery mode depending on what you want.
1. AmonRA Recovery 1.6.2 - Link (for android 2.1)
2. V1.8.1.4 recovery - Link (For Android 2.2)
4. Recovery CMW Ascend - Link (For android 2.3+ )
5. Recovery 4.0.1.5 - Link (2.2-2.3+)
6. Recovery 5.0.2.3 - Link And instalation Link (for android 2.3+)
7. Recovery 5.0.2.6 - Link (For android 2.3+)
8. Recovery 5.0.2.7 - Link (For android 2.3+)
The example above is taken from this thread: http://forum.xda-developers.com/showthread.php?t=1608000 In the second post.
So to be quick, there is no restriction on your recovery you can use whichever you need to.
mojito0 said:
What do you mean by "supports" ?
Which version of recovery you should install on your phone just has to do with what Rom you want to install, or to be more accurate which version of android your ROM has.
So you should install your recovery mode depending on what you want.
1. AmonRA Recovery 1.6.2 - Link (for android 2.1)
2. V1.8.1.4 recovery - Link (For Android 2.2)
4. Recovery CMW Ascend - Link (For android 2.3+ )
5. Recovery 4.0.1.5 - Link (2.2-2.3+)
6. Recovery 5.0.2.3 - Link And instalation Link (for android 2.3+)
7. Recovery 5.0.2.6 - Link (For android 2.3+)
8. Recovery 5.0.2.7 - Link (For android 2.3+)
The example above is taken from this thread: http://forum.xda-developers.com/showthread.php?t=1608000 In the second post.
So to be quick, there is no restriction on your recovery you can use whichever you need to.
Click to expand...
Click to collapse
I tried everything step by step correctly but still no luck.
Do I need to remove the previously flashed recovery??
Also when I tried to do a factory reset, the phone rebooted and got stuck at boot logo. Please help!!
Thanks in advance.
Finally!!
I updated my Rom manger to the latest version and flashed the recovery again and it worked!!
spice mi-270 stuck on logo
Abhinav2 said:
I updated my Rom manger to the latest version and flashed the recovery again and it worked!!
Click to expand...
Click to collapse
sir spice mi-270 brick ho gaya he,jab on kerta hu to spice ke logo per ruck jata he,
Hay guys, I'm facing this problem with Nexus root tool kit, my fastboot status is unlocked but as I check drivers check it restart the phone in fastmod and get this error.
Do I have to install SDK? Any solution???
vickywaqas said:
Hay guys, I'm facing this problem with Nexus root tool kit, my fastboot status is unlocked but as I check drivers check it restart the phone in fastmod and get this error.
Do I have to install SDK? Any solution???
Click to expand...
Click to collapse
Phone booted or in bootloader?.. Debugging enabled? OEM usb cable? Propper drivers installed?.. Tried changing usb ports?
Setting.Out said:
Phone booted or in bootloader?.. Debugging enabled? OEM usb cable? Propper drivers installed?.. Tried changing usb ports?
Click to expand...
Click to collapse
Yes phone booted in bootloader it say FAST BOOT & STATUS UNLOCKED, I can't enter in recoverymod, as I enter in recovery mod I get dead android with red ! mark.
When I purchased this phone (a few days back) I had Gingerbread, I updated it n due to low signals (I think) ICS installed properly but when it came to installing applications it got hanged, now I can't run applications properly as it reboot if I try to open any application.
I again try to update it from wifi from ICS 4.0.4 to JB 4.1 ( As new update was available) but after complete download of JB when it started to installing I got that dead android sign with RED ! mark.
Do you have any idea what happened wrong?
vickywaqas said:
Yes phone booted in bootloader it say FAST BOOT & STATUS UNLOCKED, I can't enter in recoverymod, as I enter in recovery mod I get dead android with red ! mark.
When I purchased this phone (a few days back) I had Gingerbread, I updated it n due to low signals (I think) ICS installed properly but when it came to installing applications it got hanged, now I can't run applications properly as it reboot if I try to open any application.
I again try to update it from wifi from ICS 4.0.4 to JB 4.1 ( As new update was available) but after complete download of JB when it started to installing I got that dead android sign with RED ! mark.
Do you have any idea what happened wrong?
Click to expand...
Click to collapse
You don't have a recovery and need to flash one using the toolkit..
1. DOWNLOAD CUSTOM RECOVERY... 2. OPEN TOOLKIT.. ADVANCED MENU/BOOT RECOVERY (this is only temporary) 3. CHANGE SCREEN SETTINGS TO ZERO (or the screen will go black and it's a pain) 4. MOUNT USB... 5. COPY RECOVERY ZIP FROM COMPUTER TO PHONE.. 6. USE RECOVERY TO INSTALL FROM SD / FLASH THE RECOVERY YOU COPIED.. 7. ENJOY YOUR CUSTOM RECOVERY..
Setting.Out said:
You don't have a recovery and need to flash one using the toolkit..
1. DOWNLOAD CUSTOM RECOVERY... 2. OPEN TOOLKIT.. ADVANCED MENU/BOOT RECOVERY (this is only temporary) 3. CHANGE SCREEN SETTINGS TO ZERO (or the screen will go black and it's a pain) 4. MOUNT USB... 5. COPY RECOVERY ZIP FROM COMPUTER TO PHONE.. 6. USE RECOVERY TO INSTALL FROM SD / FLASH THE RECOVERY YOU COPIED.. 7. ENJOY YOUR CUSTOM RECOVERY..
Click to expand...
Click to collapse
Please guide me a little bit details as I'm new user of Nexus S & Thanks in advance..
You said install custom recovery right? now I have downloaded 2 files for Clockworkmod recovery 6.x.x.x. one is in .ZIP format & other is in .img format. Now the question is
1). Do I have to flash recovery by using this advance option of Nexus Root Tool Kit by clicking on FLASH PERMANENT & then clicking on recovery & then giving the path of CMW 6.x.x.x.IMG and then after giving the path clicking on ROOT & checking the "And also flash custom recovery" option?
2). Can I install .ZIP file CWM 6.x.x.x.ZIP by just putting it into the SD card of Nexus S, turning the phone on into RECOVERY mode and the selecting INSTALL .ZIP from SD card (Something like this) then locating CWM 6.x.x.x.ZIP & it will install it automatically?
I installed CWM recovery in my Samsung Galaxy Gio a year back & then installed Cyanogenmod in that phone but I have forgot the procedure but I think I did it like I entered into recovery mode by pressing some buttons & then install zip from SD (I think I did like this but not sure).
P.S: I can enter into recovery when I see DEAD ANDROID with RED ! then I press volume up + power button 2 times then it shows me stock recovery.
One last thing to ask, you said CHANGE SCREEN SETTING TO ZERO? What does it means? Screen setting of Laptop or Mobile (Brightness or what?)
Thank you very much for your support :highfive:
vickywaqas said:
Please guide me a little bit details as I'm new user of Nexus S & Thanks in advance..
You said install custom recovery right? now I have downloaded 2 files for Clockworkmod recovery 6.x.x.x. one is in .ZIP format & other is in .img format. Now the question is
1). Do I have to flash recovery by using this advance option of Nexus Root Tool Kit by clicking on FLASH PERMANENT & then clicking on recovery & then giving the path of CMW 6.x.x.x.IMG and then after giving the path clicking on ROOT & checking the "And also flash custom recovery" option?
2). Can I install .ZIP file CWM 6.x.x.x.ZIP by just putting it into the SD card of Nexus S, turning the phone on into RECOVERY mode and the selecting INSTALL .ZIP from SD card (Something like this) then locating CWM 6.x.x.x.ZIP & it will install it automatically?
I installed CWM recovery in my Samsung Galaxy Gio a year back & then installed Cyanogenmod in that phone but I have forgot the procedure but I think I did it like I entered into recovery mode by pressing some buttons & then install zip from SD (I think I did like this but not sure).
P.S: I can enter into recovery when I see DEAD ANDROID with RED ! then I press volume up + power button 2 times then it shows me stock recovery.
One last thing to ask, you said CHANGE SCREEN SETTING TO ZERO? What does it means? Screen setting of Laptop or Mobile (Brightness or what?)
Thank you very much for your support :highfive:
Click to expand...
Click to collapse
Option 2.. flash recovery zip... The screen setting is in the temporary recovery.. If it times out the screen will go black and you will have to use the Toolkit to reboot your phone.. If you use the recovery in my signature, it has usb mounting support.. other CWM's may not..
Setting.Out said:
Option 2.. flash recovery zip... The screen setting is in the temporary recovery.. If it times out the screen will go black and you will have to use the Toolkit to reboot your phone.. If you use the recovery in my signature, it has usb mounting support.. other CWM's may not..
Click to expand...
Click to collapse
One more question just to conform something, can I use this Philz Touch 5.06.1 (Latest) on my STOCK ROM? I'm having ICS 4.0.4 build number IMM76D, can I flash this recovery? I have remember the old days when I flashed CWM in my Samsung Galaxy Gio, they had 4 types of CWM. One was for some RAW disk format, another was for EXT4 (Something like that).
Can I install it for I.C.S 4.0.4? Do I have to root my Nexus S I9023 after that or is it already rooted? that UNLOCK means my phone is rooted? What about the Super user application? DO I have to install in separately? Can I install Cyanogenmod after install this recovery or should I have to install Super user before installing Cyanogenmod? I have remember when I install Cyanogenmod on my Galaxy Gio, the Super User was already there..
Lots of questions for you again but these are just to conform that I'm leading towards right direction, please answer so that I must start flashing Philz Touch 5.06.1.
Thanks in advance :highfive:
vickywaqas said:
One more question just to conform something, can I use this Philz Touch 5.06.1 (Latest) on my STOCK ROM? I'm having ICS 4.0.4 build number IMM76D, can I flash this recovery? I have remember the old days when I flashed CWM in my Samsung Galaxy Gio, they had 4 types of CWM. One was for some RAW disk format, another was for EXT4 (Something like that).
Can I install it for I.C.S 4.0.4? Do I have to root my Nexus S I9023 after that or is it already rooted? that UNLOCK means my phone is rooted? What about the Super user application? DO I have to install in separately? Can I install Cyanogenmod after install this recovery or should I have to install Super user before installing Cyanogenmod? I have remember when I install Cyanogenmod on my Galaxy Gio, the Super User was already there..
Lots of questions for you again but these are just to conform that I'm leading towards right direction, please answer so that I must start flashing Philz Touch 5.06.1.
Thanks in advance :highfive:
Click to expand...
Click to collapse
1. YES
2. NO, unlocked is not rooted and you'll need a super user.. Most new (4.2.2) custom's have this pre-installed.. otherwise use a .zip or the recovery may have it..??
3. Click the link at the bottom of my signature.. There is a chart for roms.. have a look before you flash..
Setting.Out said:
1. YES
2. NO, unlocked is not rooted and you'll need a super user.. Most new (4.2.2) custom's have this pre-installed.. otherwise use a .zip or the recovery may have it..??
3. Click the link at the bottom of my signature.. There is a chart for roms.. have a look before you flash..
Click to expand...
Click to collapse
Tried to install recovery, got error message, it says..
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted.
Now where's the problem?
vickywaqas said:
Tried to install recovery, got error message, it says..
E: failed to verify whole-file signature
E: signature verification failed
Installation aborted.
Now where's the problem?
Click to expand...
Click to collapse
What recovery are you using and trying to install.. Try installing another recovery.. Twrp is good too..
Setting.Out said:
What recovery are you using and trying to install.. Try installing another recovery.. Twrp is good too..
Click to expand...
Click to collapse
Philz Touch 5.06.1 & 5.06 but on both got the same error.
Can you give me the link of TWRP recovery in .ZIP format?
vickywaqas said:
Philz Touch 5.06.1 & 5.06 but on both got the same error.
Can you give me the link of TWRP recovery in .ZIP format?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2032337
But you missed an answer.. what recovery are you using to flash these? Are you 4g?
ok , i have a droid 2 global and its rooted using framaroot ! i have superuser installed on my phone and everything but i don't know how to install clockworkmod recovery my my phone . i have tried using rom manager to install it what i did was , i went into rom manager and click on recovery setup and then i click on clockworkmod recovery under ( install or upgrade recovery ) when it downloaded cwm and then i got a message saying that it was download successfully ! but then i reboot into recovery ? ! cwm it not there all im seeing is the stock recovery ! I SERIOUSLY NEED HELP INSTALLING CLOCKWORKMOD ! ! ! !
Install BOOTSTRAP RECOVERY
NOOBHEADFORLIFE said:
ok , i have a droid 2 global and its rooted using framaroot ! i have superuser installed on my phone and everything but i don't know how to install clockworkmod recovery my my phone . i have tried using rom manager to install it what i did was , i went into rom manager and click on recovery setup and then i click on clockworkmod recovery under ( install or upgrade recovery ) when it downloaded cwm and then i got a message saying that it was download successfully ! but then i reboot into recovery ? ! cwm it not there all im seeing is the stock recovery ! I SERIOUSLY NEED HELP INSTALLING CLOCKWORKMOD ! ! ! !
Click to expand...
Click to collapse
You need flash the Recovery
1.- Rom Manager
2.- Recovery Setup
3.- Install or update recovery (ClockworkMod Recovery)
4.- You need find the device (droid2we this is the DROID 2 GLOBAL)
5.- Install BOOTSTRAP RECOVERY
6.- Click on the bottom [Bootstrap Recovery]
7.- Wait to the finish
8.- Reboot Recovery
9.- DONE, you have the CWM Recovery
NOTE: So I did and it worked.
You need Droid 2 Recovery Bootstrap by koush: http://www.koushikdutta.com/2010/08/droid-x-recovery.html
This app requires root and will let you install and then enter CWM.
THANKS
fenircalderon said:
You need flash the Recovery
1.- Rom Manager
2.- Recovery Setup
3.- Install or update recovery (ClockworkMod Recovery)
4.- You need find the device (droid2we this is the DROID 2 GLOBAL)
5.- Install BOOTSTRAP RECOVERY
6.- Click on the bottom [Bootstrap Recovery]
7.- Wait to the finish
8.- Reboot Recovery
9.- DONE, you have the CWM Recovery
NOTE: So I did and it worked.
Click to expand...
Click to collapse
it work . thanks for everything bro but i have one small problem with it and its every time i click on reboot now ! the phone go's off and when it come back on , the screen stays black meaning im not see the boot logo at all and it just stays so until i lethally take out the battery from the phone and put it back in and the phone just boots up normally . now i wanna know if is something i did or doing wrong ? ! so if u had or having the same problem and u know how to fix it , let me know
never mind
NOOBHEADFORLIFE said:
it work . thanks got everything bro but i have one small problem with it and its every time i click on reboot now ! the phone go's off and when it come back on , the screen stays black meaning im not see the boot logo at all and it just stays so until i lethally take out the battery from the phone and put it back in and the phone just boots up normally . now i wanna know if is something i did or doing wrong ? ! so if u had or having the same problem and u know how to fix it , let me know
Click to expand...
Click to collapse
i got it already . what i was doing wrong was i was clicking the power button to select instead of using the slid out keypad . THANKS FOR EVERYTHING AGAIN MAN
fenircalderon said:
You need flash the Recovery
1.- Rom Manager
2.- Recovery Setup
3.- Install or update recovery (ClockworkMod Recovery)
4.- You need find the device (droid2we this is the DROID 2 GLOBAL)
5.- Install BOOTSTRAP RECOVERY
6.- Click on the bottom [Bootstrap Recovery]
7.- Wait to the finish
8.- Reboot Recovery
9.- DONE, you have the CWM Recovery
NOTE: So I did and it worked.
Click to expand...
Click to collapse
don't need all those steps just install the modified droid x or droid 3
both install cwm 5.0
bootstrap links in my list
[HOW TO] Install/Use Droid 2/X/3 Bootstrap
Sent from my XT862 using Tapatalk