Hi, reflashed my GS2 with the stock O2 ICS firmware as the non O2 one was giving me issues, as I was rooted, did a factory reset + clear cache, and all worked fine.
My friend saw me do this and asked if I could put his to the O2 ICS release as he was also on the stock ICS release, as we wanted to get it early ( we both are on O2 contracts)
Tried reflashing without a full factory reset, as he didn't want to loose data, and it failed. Now the phone says firmware issue but will still boot into download mode.
I've tried reflashing again and I can't get the phone back working, ODIN fails when flashing saying this
Code:
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Not sure what to try, i've read some posts of people who claim to have got back to a working state, but none listed steps
Help!
Thanks
Chris
Related
So here's what happened. I tried to install CWM 6.0.1.2 using EZ Recovery and it rebooted into ODIN with the words, could not do normal boot, in red. When I reboot it, it would just go back to the ODIN screen, so I tried to use the root 66 method. At first, it would get to system.img.ext4, but the green bar would barely move and be stuck there for 30 minutes. I would try again by taking out the USB cord, rebooting phone (maybe bad idea?). I did it again and it would be stuck there. I tried different USB ports on my laptop. Some will get to system.img and be stuck or get to recovery.img and say fail. Is my phone hard bricked or is there something else I can do? Thanks!
I also tried it on a different computer and it gets stuck on boot.img instead. Any help would be greatly appreciated!
It seems like using the older version of Odin gave me more consistent results. I now always get to system.img before it fails. The green bar gets 1/3 of the way then says failed.
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> Complete(Write) operation failed.
<ID:0/004> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Is there anyway to get it to be successful?
By mistake I Flashed Philz touch recovery on my s4 i337 through a phone application "RASHR" and when i restarted my Phone it says
"System Software not authorized by AT&T has been found on your phone. Please turn off your phone and go to the nearest At&t store for help"
The I googled it and found that my phone is softbricked and I have to reflash the stock rom. Then i downloaded the stock roms I337UCUAMDB and I337UCUAMDL .
But while flashing them I get this
Log:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
The phone displays this:
Start [224, 1440]
SV REV. CHECK FAIL : FUSED : 2, BINARY : 1
I get this message from both the above roms.
Please help!!!!! :crying: :crying: :crying:
Amisaini said:
By mistake I Flashed Philz touch recovery on my s4 i337 through a phone application "RASHR" and when i restarted my Phone it says
"System Software not authorized by AT&T has been found on your phone. Please turn off your phone and go to the nearest At&t store for help"
The I googled it and found that my phone is softbricked and I have to reflash the stock rom. Then i downloaded the stock roms I337UCUAMDB and I337UCUAMDL .
But while flashing them I get this
Log:
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
The phone displays this:
Start [224, 1440]
SV REV. CHECK FAIL : FUSED : 2, BINARY : 1
I get this message from both the above roms.
Please help!!!!! :crying: :crying: :crying:
Click to expand...
Click to collapse
At your service
What version of android were you on before, was it 4.3 or later touchwiz? also can you boot to recovery?
REMEMBER TO HIT THAT THANKS BUTTON IF I HELPED
Hey everyone,
I have first tried to update my cellphone both directly via the phone itself and smart switch with no success. I have no idea why these two didn't work and because I am a very stubborn person I have googled the issue and found out that I can flash a firmware via Odin. Which I tried as well.
My old firmware was G920FXXU1AOD4, I tried to flash the version G920FXXU2BOGG.
Sadly, the result was this :
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
I am now unable to reboot my phone properly. I have tried to use Smart Switch to use the emergency recovery but it seems like it doesn't recognize my phone so it's not working.
I have also tried to flash a recovery system called twrp but it didn't work either and wouldn't let me enter the recovery system.
I have no idea what to do anymore. My phone is a week old and I feel really stupid for ruining it because I was stubborn and wanted it updated. I am a rookie with flashing, rooting, etc.. I have never done this before.
Any idea of what I can do ? Thanks a lot for any future help, you have my phone's life in your hands and I couldnt be thankful enough if I manage to save it thanks to you all.
Bring your S6 back to Samsung for warranty repair.
Hello all,
I have a Samsung Galaxy S7, from Rogers but unlocked, version SM-G930W8 that I bought second hand.
Phone was rooted, I factory reset it to prepare it for my wife, then installed apps and moved data and everything.
Turned the phone off and put it aside, the next day I bought a new Nano SIM, turned it ON and I got "Custom binary blocked by FRP lock".
I downloaded G930W8VLU1APG1_G930W8OYA1APG1_XAC tried flashing via ODIN and got this:
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> skip file list for home binary
<ID:0/004> param.bin
<ID:0/004> Home Binary Download
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
On the phone I had: SW REV. CHECK FAIL. DEVICE: 2. BINARY: 1
Tried: twrp-3.0.2-4-herolte.img.tar with Odin
It goes all the way through but fails at the end with this message:
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> recovery.img
<ID:0/004> RQT_CLOSE !!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
On the phone I had: Custom Binary(Recovery) Blocked by FRP Lock
Also I have tried multiple computers, multiple cables, multiple versions of ODIN, ...
Now the phone is stuck at the Samsung screen and won’t turn on or off, until the battery dies.
Tried Smart Switch but it asks for the serial number, which I do not have. (There is just IMEI on the back of the phone)
Not sure but I think somehow after the factory reset the OEM Unlock got disabled.
Any help is greatly appreciated.
Did you ever figure this out? I'm facing the same thing and hoping my phone isn't bricked.
https://forum.xda-developers.com/galaxy-s7/help/potentially-bricked-s7-flat-custom-t3583502
This will fix and let you flash.
1) Open Odin, place all the necessary files into their slots.
2) Go the the options tab, make sure "Auto Reboot" IS ticked.
3) Press "start", but as soon as you do, hold down Vol down+Home+Power on your phone.
Odin will fail and your phone will reboot into download mode again.
Now press "Start" in Odin again, and your phone should flash without a problem.
This might take a few attempts to get right, but I hope it helps.
Hey!
I decided to install the Resurrection Remix rom on my Samsung J7 2016 (SM-J710FN). But after i flashed it I noticed my IMEI and baseband had disappeared. My phone doesn't recognize my SIM card and my cellular data no longer works. I didn't have a efs backup too. I might have wiped the system partition in my twrp recovery.
If you could help me I would really appreciate it.
get odin and reflash all 4 of the latest firmware files (AP,BL,CP,CSC)
RS.85243 said:
get odin and reflash all 4 of the latest firmware files (AP,BL,CP,CSC)
Click to expand...
Click to collapse
I tried to but each time I try to flash the bootloader an error comes out.
Ratbug said:
I tried to but each time I try to flash the bootloader an error comes out.
Click to expand...
Click to collapse
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Trying to flash a rom
On the phone it says sw rev. check fail. device: 4, binary: 2
Ratbug said:
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> param.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Trying to flash a rom
On the phone it says sw rev. check fail. device: 4, binary: 2
Click to expand...
Click to collapse
find the version of official firmware you had on it last, if you try to flash the boot with an older version of the firmware it will fail. Here is a link to the latest firmware for the 710fn from India https://drive.google.com/open?id=1f_C8REO2ZRwiqBegUGEnUer9DcWy9adR
if i try it this way i get an "PIT" error on my phone in ODIN MODE
Never mind. I took the phone to a Samsung shop and they fixed it.
i have the same problem and I can't find the right FW.
all i know is, that I previously had the last available OTA installed.
when trying to flash the FW given above, i get the error: secure check failed (pit)
I have the same problem now. I've tried many available firmware versions and none of them work. Is there anything I can do to make the phone usable again?