Phone and 180 DPI - Nexus S Q&A, Help & Troubleshooting

Does someone know how to make it work?
I already tried the tablet phone fix that's been going around xda but all I get is this
If anyone knows please help me
Thanks

Which rom and kernel have you flash it?

Pakobis said:
Which rom and kernel have you flash it?
Click to expand...
Click to collapse
Aokp build 31 with trinity kernel
but i dont think its a kernel related problem

Related

[Q] kernel for jb?

Do you guys know any kernel for jb with s2w?
i really want a kernel with s2w but now Dragun kernel is unachievable.
or can anyone make a kenel with s2w based on bruce's cm10 stock kernel?
no answers?:'(
Check the stickies in the dev's section
Sent From My Viper S 1.3.0
jslim38 said:
Check the stickies in the dev's section
Sent From My Viper S 1.3.0
Click to expand...
Click to collapse
sorry i didn't get what you mean..do you mean that there's something in the rom's op?
theggs said:
but now Dragun kernel is unachievable.
Click to expand...
Click to collapse
Do you mean that DragunKorr V.13 is unavailable?
Go to ht#tp://sdx-downloads.c#om/devs/RMS/My%20Kernel%20Builds/
Delete # from link
Radolex said:
Do you mean that DragunKorr V.13 is unavailable?
Go to ht#tp://sdx-downloads.c#om/devs/RMS/My%20Kernel%20Builds/
Delete # from link
Click to expand...
Click to collapse
big thx !
i think using drogun kernel isn't so smooth as the stock one.but it worth trying!
thx again!
There is another kernel from DragunKorr, named ParanoidKernel V2, try both.
Radolex said:
There is another kernel from DragunKorr, named ParanoidKernel V2, try both.
Click to expand...
Click to collapse
both are laggy..i don't know why
hope someone make a kernel base on bruce's stock kernel.
Try mayby Powerful Kernel Reset and then instal kernel?
I don't know why it's laggy in your rom, both of them are smooth for me.
I'd say just wait for someone to make a kernel with Sweep2Wake. Unless your willing to learn and compile a kernel with that feature
Sent from my Sensation
blahbl4hblah said:
I'd say just wait for someone to make a kernel with Sweep2Wake. Unless your willing to learn and compile a kernel with that feature
Sent from my Sensation
Click to expand...
Click to collapse
you're right.
i wanna learn but no so much time.so can only wait..
can't wait for that.

Help with WIFI fix- Ayone

Hi
i dont know if anyone out there can help fix a wifi issue on the rom below
http://forum.xda-developers.com/showthread.php?t=1943745
What is your issue?
Try flashing a custom kernel, like Matr1x kernel.
jacob66 said:
What is your issue?
Try flashing a custom kernel, like Matr1x kernel.
Click to expand...
Click to collapse
WIFI wont turn on
thats just the thing i dont know what it is, everything on the rom works except the WIFI, it was ported by glaxyuser, we tried different kernels and still no joy

Kernel Help

I was Using CM9 Alpha 14 and i flashed vurrut's kernel i faced video playback problem
and when i used adiram's kernel problem still persists but dhiru,'s kernel doesnt have any problem??
Does Any One Faces This Problem???
Plzzzzz Help Needed!!!!!!!
Did u flashed adiram on cm 9 ?
Sent From My Galaxy SL Running CM 10 .By Dhiru
Yes i did but no use same problem!!!!
Abhishek992 said:
Yes i did but no use same problem!!!!
Click to expand...
Click to collapse
use revolution kernel
wrishaba said:
use revolution kernel
Click to expand...
Click to collapse
don't give anyone wrong advise if you don't know about the topic how can you tell him to flash revolution kernel on CM9 its only made for CM10 it can even brick his device
so guyzz finally which kernel should be used for OC on CM9 Alpha 14
There stil no updated kernel yet for cm9.
Ask Ooi see he willing to build one for it.
Sent from my GT-I9003 using Tapatalk 2

what am i doing wrong with kernel upgrade

hi i am running cm10.1 nighly and cannot get my tablet to boot with any custom kernel except the one that comes with the nightly am i doing something wrong i always remember to wipe cache/delvik after install..i am at a loss... thank you for your advice and thank you for checking this out
Which kernels are you trying to flash?
sbdags said:
Which kernels are you trying to flash?
Click to expand...
Click to collapse
i have tried that1 kernel and bryce oc kernel as well as clemsyntfuniversalcyano kernel
nhsccdp said:
i have tried that1 kernel and bryce oc kernel as well as clemsyntfuniversalcyano kernel
Click to expand...
Click to collapse
I think bryce09 can help you with this, either pm him or ask here http://forum.xda-developers.com/showthread.php?t=2092968 . I'm not expert with cm10.

What should I be aware of after flashing a Kernel?

I've been researching about this for 30 minutes and still couldn't find anything that answered my question, I apologize in advance if the answers are obvious.
So the question is as the title states, what should I be aware of after flashing a Kernel on CM12.1? Will I have any issues when updating to another nightly? Or when flashing a stock-ROM ? Thanks in advance!
if you update your rom, your kernel will be replaced with one if the rom.
so you have to reflash your custom kernel
HelpMeruth said:
if you update your rom, your kernel will be replaced with one if the rom.
so you have to reflash your custom kernel
Click to expand...
Click to collapse
Thank you for the answer, but despites that is there anything I should be aware of when using a custom kernel? Xposed, going back to stock, etc
Nothing i know of, xposed doesnt give any problems to me when i flash a kernel so you should be good.
so its pretty save to flash a kernel
HelpMeruth said:
Nothing i know of, xposed doesnt give any problems to me when i flash a kernel so you should be good.
so its pretty save to flash a kernel
Click to expand...
Click to collapse
One more question if you don't mind, how can I custom my kernel settings? Currently on Squid Kernel (Moto g 2015), CM12.1
Install kernel adiutur from the playstore. With that app you change all your settings

Categories

Resources