hi i am running cm10.1 nighly and cannot get my tablet to boot with any custom kernel except the one that comes with the nightly am i doing something wrong i always remember to wipe cache/delvik after install..i am at a loss... thank you for your advice and thank you for checking this out
Which kernels are you trying to flash?
sbdags said:
Which kernels are you trying to flash?
Click to expand...
Click to collapse
i have tried that1 kernel and bryce oc kernel as well as clemsyntfuniversalcyano kernel
nhsccdp said:
i have tried that1 kernel and bryce oc kernel as well as clemsyntfuniversalcyano kernel
Click to expand...
Click to collapse
I think bryce09 can help you with this, either pm him or ask here http://forum.xda-developers.com/showthread.php?t=2092968 . I'm not expert with cm10.
Related
Hi,
I have installed Matr1x kernel. I am using Stock ICS Rom only. Will the New Jelly Bean Update.zip work.
Can i install using cwm.
Please advise me.
Regards,
asdf2020
It should flash through CWM, but keep in mind it'll overwrite your recovery and replace your kernel.
chronophase1 said:
It should flash through CWM, but keep in mind it'll overwrite your recovery and replace your kernel.
Click to expand...
Click to collapse
Thanks for reply.
Does it will wipe my data/apps as well?
No. Everything will be the same. I flashed over ICS and everything was kept the same for me
chronophase1 said:
No. Everything will be the same. I flashed over ICS and everything was kept the same for me
Click to expand...
Click to collapse
has your kernel been replaced??? or is it the same ??
For ****s-and-giggles, I threw the matr1x kernel on top of my 4.1.1 ota last night ... It didn't work.
asdf2020 said:
has your kernel been replaced??? or is it the same ??
Click to expand...
Click to collapse
Yea. My app settings stayed the same, but like I said, my kernel got replaced, which is expected. I don't use matrix though and seeing as the kernel sources vary, chances of it working are pretty slim, as seen above.
asdf2020 said:
Hi,
I have installed Matr1x kernel. I am using Stock ICS Rom only. Will the New Jelly Bean Update.zip work.
Can i install using cwm.
Please advise me.
Regards,
asdf2020
Click to expand...
Click to collapse
Your kernel will get replaced. I wouldn't recommend it because I've tried other kernels with the official OTA JB ROM and the experience wasn't as smooth. I have yet to try Matr1x kernel yet though.
No different versión of Ndroid not supported at least yet ;D
Lets just say hes workin on it i would expect
So......official JB 4.1 won't work on my Matr1x kernel
Do you guys know any kernel for jb with s2w?
i really want a kernel with s2w but now Dragun kernel is unachievable.
or can anyone make a kenel with s2w based on bruce's cm10 stock kernel?
no answers?:'(
Check the stickies in the dev's section
Sent From My Viper S 1.3.0
jslim38 said:
Check the stickies in the dev's section
Sent From My Viper S 1.3.0
Click to expand...
Click to collapse
sorry i didn't get what you mean..do you mean that there's something in the rom's op?
theggs said:
but now Dragun kernel is unachievable.
Click to expand...
Click to collapse
Do you mean that DragunKorr V.13 is unavailable?
Go to ht#tp://sdx-downloads.c#om/devs/RMS/My%20Kernel%20Builds/
Delete # from link
Radolex said:
Do you mean that DragunKorr V.13 is unavailable?
Go to ht#tp://sdx-downloads.c#om/devs/RMS/My%20Kernel%20Builds/
Delete # from link
Click to expand...
Click to collapse
big thx !
i think using drogun kernel isn't so smooth as the stock one.but it worth trying!
thx again!
There is another kernel from DragunKorr, named ParanoidKernel V2, try both.
Radolex said:
There is another kernel from DragunKorr, named ParanoidKernel V2, try both.
Click to expand...
Click to collapse
both are laggy..i don't know why
hope someone make a kernel base on bruce's stock kernel.
Try mayby Powerful Kernel Reset and then instal kernel?
I don't know why it's laggy in your rom, both of them are smooth for me.
I'd say just wait for someone to make a kernel with Sweep2Wake. Unless your willing to learn and compile a kernel with that feature
Sent from my Sensation
blahbl4hblah said:
I'd say just wait for someone to make a kernel with Sweep2Wake. Unless your willing to learn and compile a kernel with that feature
Sent from my Sensation
Click to expand...
Click to collapse
you're right.
i wanna learn but no so much time.so can only wait..
can't wait for that.
Hello, I am enjoying my wonderful new rom that was posted here: http://forum.xda-developers.com/showthread.php?t=2430785
I am looking for a kernel that will work with this ROM and allow me to overclock the CPU. I did do some reading already in the forums, but there seems to be no solid answer. Some say the blackhawk works and some say it doesn't. I will be grateful to whomever helps me find this kernel. Thanks!
NEXT Kernel http://forum.xda-developers.com/showthread.php?t=2302663 (only don´t forget to flash the proprietary binary part DIRECTLY after the kernel )
or
Dhollmen Kernel should work too http://forum.xda-developers.com/showthread.php?t=2176563
Android-Andi said:
NEXT Kernel http://forum.xda-developers.com/showthread.php?t=2302663 (only don´t forget to flash the proprietary binary part DIRECTLY after the kernel )
or
Dhollmen Kernel should work too http://forum.xda-developers.com/showthread.php?t=2176563
Click to expand...
Click to collapse
THANKS!!!
nope
Android-Andi said:
NEXT Kernel http://forum.xda-developers.com/showthread.php?t=2302663 (only don´t forget to flash the proprietary binary part DIRECTLY after the kernel )
or
Dhollmen Kernel should work too http://forum.xda-developers.com/showthread.php?t=2176563
Click to expand...
Click to collapse
Dhollmen just hard bricked my GS3. (Slimbean 4.3.1)
just throwing that out there.
Does the Mahdi Rom work with Franco Kernel R4? I have this kernel on my stock 1+1 64gb international version. Reading on the developer forums some say yes and some say no that it causes reboot issues. I am just trying to get some clarification on this issue. Thanks
elrey311 said:
Does the Mahdi Rom work with Franco Kernel R4? I have this kernel on my stock 1+1 64gb international version. Reading on the developer forums some say yes and some say no that it causes reboot issues. I am just trying to get some clarification on this issue. Thanks
Click to expand...
Click to collapse
Yes it works with it, but only the version posted in the mahdi rom thread
Few users have reboots, many don't
Mahdi Rom
Do I need to add the kernel off the op page or just use the one I already have in twrp, it is the Franco kernel r4. It is the same one that is on op page I think. I see some people talking about dr87 twrp. I just have the stock 2.7.1.0 twrp installed. Do I need the dr87 twrp? Sorry for the noob questions just trying to it get right. Thanks
elrey311 said:
Do I need to add the kernel off the op page or just use the one I already have in twrp, it is the Franco kernel r4. It is the same one that is on op page I think. I see some people talking about dr87 twrp. I just have the stock 2.7.1.0 twrp installed. Do I need the dr87 twrp? Sorry for the noob questions just trying to it get right. Thanks
Click to expand...
Click to collapse
Use dr87 twrp and dr87 franco kernel r4.
I'm using both on MAHDI and it works perfectly.
MAHDI ROM
zephiK said:
Use dr87 twrp and dr87 franco kernel r4.
I'm using both on MAHDI and it works perfectly.
Click to expand...
Click to collapse
Just one more question. Do you flash the dr87 twrp right over the stock twrp or do you have to remove the stock twrp? Thanks for the quick reply and all the help.
elrey311 said:
Just one more question. Do you flash the dr87 twrp right over the stock twrp or do you have to remove the stock twrp? Thanks for the quick reply and all the help.
Click to expand...
Click to collapse
It doesn't matter what recovery you have prior to flashing, flashing dr87 twrp will override whatever recovery you were using before. Fastboot flash it or use the flashable zip to flash it. Up to you.
MAHDI ROM
zephiK said:
It doesn't matter what recovery you have prior to flashing, flashing dr87 twrp will override whatever recovery you were using before. Fastboot flash it or use the flashable zip to flash it. Up to you.
Click to expand...
Click to collapse
Perfect! Thanks for all the help.
elrey311 said:
Perfect! Thanks for all the help.
Click to expand...
Click to collapse
Anytime help is always just around the corner. Enjoy MAHDI, I certainly do
MAHDI ROM
I flashed the dr87 Franco kernel today and never got past the one+ screen on boot up. I was just wondering if I needed to flash Mahdi rom first and then flash the dr87 Franco kernel? I did get the dr87 twrp installed and all is well with that. I re- flashed the Franco kernel r4 and I'm still on the stock cm rom and everything is good. After reading the MAHDI ROM forum it seems they are having problems with this.
elrey311 said:
I flashed the dr87 Franco kernel today and never got past the one+ screen on boot up. I was just wondering if I needed to flash Mahdi rom first and then flash the dr87 Franco kernel? I did get the dr87 twrp installed and all is well with that. I re- flashed the Franco kernel r4 and I'm still on the stock cm rom and everything is good. After reading the MAHDI ROM forum it seems they are having problems with this.
Click to expand...
Click to collapse
Simply follow the steps in the MAHDI OP post.
Its pretty much.
1. Factory Wipe
2. Flash MAHDI then gapps or kernel (doesnt matter if u flash gapps or kernel first).
MAHDI ROM
zephiK said:
Simply follow the steps in the MAHDI OP post.
Its pretty much.
1. Factory Wipe
2. Flash MAHDI then gapps or kernel (doesnt matter if u flash gapps or kernel first).
Click to expand...
Click to collapse
Sounds good my friend. Thanks for the help.
elrey311 said:
Sounds good my friend. Thanks for the help.
Click to expand...
Click to collapse
Let me know how it goes
edit: seems like the new version of mahdi just released doesnt work with the franco r4 that was posted in op post. works with the version prior to that though.
MAHDI ROM
zephiK said:
Let me know how it goes
edit: seems like the new version of mahdi just released doesnt work with the franco r4 that was posted in op post. works with the version prior to that though.
Click to expand...
Click to collapse
Are they getting all the bugs worked out of this and is it ready to roll? I kinda have been waiting a little while to see how everything is going to play out. It seems like it is getting better and better. Let me know how you feel about it. Thanks
elrey311 said:
Are they getting all the bugs worked out of this and is it ready to roll? I kinda have been waiting a little while to see how everything is going to play out. It seems like it is getting better and better. Let me know how you feel about it. Thanks
Click to expand...
Click to collapse
What do you mean by bugs? Check the third post in Mahdi, theres a working bootable Franco kernel again
MAHDI ROM
zephiK said:
What do you mean by bugs? Check the third post in Mahdi, theres a working bootable Franco kernel again
Click to expand...
Click to collapse
I saw that. It seems like it is working pretty smooth and everybody is is happy with the performance.
elrey311 said:
I saw that. It seems like it is working pretty smooth and everybody is is happy with the performance.
Click to expand...
Click to collapse
Yeah its good.
So does it mean if I have this phone, I can put "[ROM] [4.4.4] [HAMMERHEAD] Mahdi-Rom 2.7 [07/19]" on it ?
benzso63 said:
So does it mean if I have this phone, I can put "[ROM] [4.4.4] [HAMMERHEAD] Mahdi-Rom 2.7 [07/19]" on it ?
Click to expand...
Click to collapse
That's for Nexus 5, go to One Android development and get it from there.
I've been researching about this for 30 minutes and still couldn't find anything that answered my question, I apologize in advance if the answers are obvious.
So the question is as the title states, what should I be aware of after flashing a Kernel on CM12.1? Will I have any issues when updating to another nightly? Or when flashing a stock-ROM ? Thanks in advance!
if you update your rom, your kernel will be replaced with one if the rom.
so you have to reflash your custom kernel
HelpMeruth said:
if you update your rom, your kernel will be replaced with one if the rom.
so you have to reflash your custom kernel
Click to expand...
Click to collapse
Thank you for the answer, but despites that is there anything I should be aware of when using a custom kernel? Xposed, going back to stock, etc
Nothing i know of, xposed doesnt give any problems to me when i flash a kernel so you should be good.
so its pretty save to flash a kernel
HelpMeruth said:
Nothing i know of, xposed doesnt give any problems to me when i flash a kernel so you should be good.
so its pretty save to flash a kernel
Click to expand...
Click to collapse
One more question if you don't mind, how can I custom my kernel settings? Currently on Squid Kernel (Moto g 2015), CM12.1
Install kernel adiutur from the playstore. With that app you change all your settings