I have updated to 1.13 Big Storage, and now im missing a few tiny but helpful things.
before my jump to 1.13 i noticed my GPRS icon had a 'disconnect' button, now on 1.13BS it doesnt, so i find it hard to disconnect my GPRS connection, i dont like having it on all the time, only as and when.
Have i not installed something from the extended rom to fix this?
Also, how can i change the MMS/SMS/Email and Ringtones. I want to use mp3 tones for all, on the SPV C500 it was a reg hack that fixed this, is this the same?
Ive got a wav file as my ring tone at the minute, but its mahoosive!
Is there a loudspeak option on the phone? and is there a way to add voice dialing/typing?
Hi vini,
You're now experiencing plain WM2003 :-(
So go for the reg.hack for mp3 ringtone selection or put them manually in the rings folder.
GPRS disconnect is the same or you get the cab from the ori. ext-rom to get the disconnect button in the bubble or you use spb pocket tips&trucs to add it or push the red disconnect button for a few seconds.
So everything you mentioned isn't plain WM2003, but very handy indeed. Which means the providers are sometimes useful.
Cheers, M
red disconnect button? i dont get that
another bug/problem ive found, is im only getting 70 characters on Certain sms messages, i think. when i Reply this happens.
The red button to disconnect a phone call.
Seems like you are using unicode in your sms replies these double byte characters are using your precious sms space. You can turn them off, but don't rember how. It has been discussed many times before, so a search on unicode should help you.
Cheers, M
How to???
Hey ppl,
I downloaded the zip file from ftp site\magician\big storage ROMS\WWE 1.13.zip
Extracted it and found bs113.nbf file.. now how do i use it to upgrade my Poket PC? Ive gt no much knowledge in this bigstorage thngy and so can u help me.. Tanx a lottt in advance...
hey Carty, there is a tutorial which explains all (ive attached it)
that is all i followed and this thread.
ive worked out that my SMS allowance (usually 160 chars) is cut to 70 if i use a ' or any form of strange punctuation.
i was writing 'whats the weather like' and it automatically changed it to 'what's the weather like' i noticed id been cut to 70 chars, but deleted the
' in "what's" and i got my 160 char limit back, freaky! but how can we fix it? or is it just me?
BS without MMC reader!
hey vini,
I faced the same prob as u rite nw, tat msg ting.. u gotta change some settings in messages.. il telya my settings.. go to messaging,accounts and ul see a setting for text messaging.. click on tat and itl take u to a place wer yr opperator# will b ritn.. belo tat thers an option "use unicode wen necessacy" check tat on...
Now to mine, i read ampda' ting and found tat i need an mmc reader.. bt i don have it and heard somewer someone who told tat u cld do it wit usb itself if u already have a patched file... can yu help me pls...
For an update to rom 1.13BS go to the thread about upgrading to 1.13 and radio 1.13 in the magician upgrading etc. section. Find the post from hlt. He wrote a complete how to & posted the tools. A few posts later I added some minor comments on the how to. You will patch a shipped rom & upgrade via usb. No need for SD- or MMC-readers.
Regards, M
H oltp,
I chkd yr posted reply and uve mentioned abt getdevicedata.exe to b copied to device... wer frm i get tat application (getdevicedata.exe)?
and how to decode tat nk.nbf file?? help me pls.. as i sed, im new!
Dear Carty,
Hlt posted the tool nbfdec in that thread, hexedit can be found on the ftp xda:[email protected] in one of the magician sub-directory. The getdevicedata file is part of the shipped rom which you can download from the ftp at the magician\shipped roms subdir.
Does this help you?
Regards, M
Hi oltp,
tanx for yr qwik reply but the thing getdevicedata.exe is not working.. i extracted it from Tmobile' 1.13 rom and transfered it to my Poket pC and clicked on it.. no sign of it getting executed or error msg.. i chkd windows directory and text file not created.. wot to do buddy??
Re: BS without MMC reader!
Carty said:
hey vini,
I faced the same prob as u rite nw, tat msg ting.. u gotta change some settings in messages.. il telya my settings.. go to messaging,accounts and ul see a setting for text messaging.. click on tat and itl take u to a place wer yr opperator# will b ritn.. belo tat thers an option "use unicode wen necessacy" check tat on...
Click to expand...
Click to collapse
ive unticked "use Unicode when necessary" and it works fine.
Carty said:
Hi oltp,
tanx for yr qwik reply but the thing getdevicedata.exe is not working.. i extracted it from Tmobile' 1.13 rom and transfered it to my Poket pC and clicked on it.. no sign of it getting executed or error msg.. i chkd windows directory and text file not created.. wot to do buddy??
Click to expand...
Click to collapse
What about skipping it & using the maupgradeut_noid? My guess is that that stepnis meant to avoid the country id error. So is maupgradeut_noid. So download it fRom the ftp, put it in your dir. with the other extracted files from the shipped rom, execute it twice & you must be there.
Regards, M
FIne,
ive got
1.enterbl.exe
2.getdevicedata.exe
3.Rom upgradeUT.exe
4.ms_.nbf
5.nk.nbf
6.radio_.nbf
7.ruu.conf
8.ruu.dll
9.UI.dll
from the original shipped T-mobile' ROM
Got MaUpgrade.exe from ftp
got bs113.nb1 from big storage folder under ftp...
i have 'em all in one folder... i also added a line 'checkid type..' in ruu.conf to avoid country id error.. so now i directly run MaUpgrade file in bootloader mode or to delete any file from above.. i mean, the Bigstorage unpatched file from shipped ROM.. which file is it? and do i have to decode or do somethin to tat bs113.nb1 file? cz the original rom had files in nbf format..
Oltp, tanx for yr reply and help me wit tis nw.. im annoying you too much i gezz
Hold on, slow down a bit for this old man.
You're mixing things up. The bs113.nb1 is a complete romimage & cannot be used in a shipped rom upgrade.
To use that file you need a different procedure:
- dump your current rom on a sd-card
- get it on your pc
- copy the first 416 bytes from your dump into (overwrite) the bs113.nb1
- write the modified bs113.nb1 on your sd-card
- put in your magician
- press power
- wait till it finishes
- reset
- done
For the shipped rom you need to
- decode the nk.nbf to nb1 format with nbfdec
- open nk.nb1 in hexeditor
- search twice for the mentioned bit pattern & replace it with the usual BS pattern
- encode the modified nk.nb1 to nk.nbf again
- connect your magician with usb to pc (no need for bootloader mode)
- run maupgradeut_noid (this will check your device & puts it into bootloader with the enterbl file)
- follow instructions on pc screen
- keep an eye on your very dark magician screen
- wait till it finishes
- reset
- done
Cheers, M
Man i made it!!
Finally i made it.. All my thanx to whoever helped me..specially to oltp.. Im sorry oltp if ive annoyed u but i ws confused & im new too.. anyway, wot i did ws, patched the BS ting in the shipped ROM' nk.nbf file after decoding it.. I don understand 1 ting.. this is the easiest method of all BIgStorage' methods.. it doesnt require a mmc reader too.. Then y dn they jus place the patched nbf file in the original shipped rom and place it in BigStorage folder.. Cz every BS folder in ftp i see, there are some oter files wich i won understand.. Anyway tanx to oltp for helping me wit his replies sooon.. Finally I got BiggggG STorage
I belief herman3101 uploaded a modified nk.nbf, don't know the exact location. I just uploaded my rom to help someone here at the forum.
So everybody can choose his/her favorite method.
& I just like to patch myself, if something goes wrong I know who to blame.
Have fun with your new rom.
Cheers, M
im having a XDA2i and i have no idea to install dkatoday. i have tried it by installing it to windows directory but wat it says is thAT i need to have a program to run.can you pls help me
Just copy it over to your device and click on it. Then find the 1.79 .dll and replace the existing one.
Everything you need to know about dktoday is in this thread
ok im kind of a newb still when it comes to HTC/wm and i've search around and cant find the answer.... anyways i've been tryin to find out how to install these for my HTC TD2
the link to it is - http://www.nuerom.com/BlogEngine/page/nuePowernueBattery.aspx
any help would be appreciated tyvm XD
It seems to me that file inside archive should be renamed to battdrvr.dll and placed into Windows folder replacing original one. But I don’t want to experiment with my device.
that cant be the only thing i have to do right?
It’s pretty weird to make something then have no installation instructions because I have no idea how to install it correctly >.<
It says on the site that there are 2 one for CDMA and one for GSM phones so I downloaded the GSM one since my provider is rogers = GSM/3G which came with a dll but is that all I need for the 1% increment and the FastCharge mode? Do I need to install the nuePowerCPL? And I tried installing the cab but nothing appeared so I downloaded the OEM package and dragged it into program files but that didn’t do anything either so I’m very confused.
anyone?
You have to put .dll in windows directory (and to be sure in app's directory) and install CPL (cab version, OEM is for ROM cooks).
theres also a batt dll in that folder i forgot the name but its not the same as the nuebattery one do i replace that one with the nuebattery dll or just copy it in?
hi all!
i am working for a few days on my kaiser to get a working android on the thing...
i would like to use the nand-option
the problem is that there is not a complete set of files to use..
i cant find a androidinstall.tar + matching kaisimg.nbh on the web..
i dont care what version it is.. just anything... donut eclair froyo..
when ik found some matching files, the links were dead...
i updated the hardspl and radio... unlocked the thing...
so the phone is ready for it!
everything i am trying does not work.. trying for two days now.. i need my life back! ;-)
some combo's are bootloading.. installing with errors (bad sectors), but a working set is not to be found... sometimes theres not enough diskspace..
changing the nbh with atools doesn't do the job... install script doesnt.. nothing does...
does anyone have a working set of files for me? (root of sd and andboot)
i need a kaiser panel1 240-320 .nbh file. but that is easy to change with atools..
hope someone can help with a link or attachment...
kind regards, joep
Hi all, some years ago, my phone fallen in water .. and since that day, the LG u8180 stopped to work (don't turn on anymore).. A few days (months ) ago, i had the idea to try to extract nand using a program (it could be VIGYS) .. the program succesfully identified my phone and extracted full nand in ".bif" extension...but i don't know how to extract it and recover video, sms, photos etc..
I've contacted vygis support to ask about it and they said me to send them the .bif file in order to decrypt it, but, when i sent them the file they answered me:
"Actually file is not crypted-it is plain binary file.How to extract sms,videos I don't know-is needed to seek internet
for this."
what have i to do?
Sorry if I posted in a wrong section.. move my thread if i did.. Thank you all