Database Info

Fatal downgrade...

Hi there,
My currently installed Rom was RUU-Prophet-G4-AKU2.2-2.20-2.47.21-Jester-r1.exe. (thank you jester for you good job)
Nevertheless, this ROM is in English and I wanted to downgrade to a French One before the selling of my device.
I have tried to install the downgrade kit detailed in this topic : http://forum.xda-developers.com/showthread.php?t=267344
The first step went OK but while trying to make the secnd step, my qtek is blocked at the boot splash screen showing the Jesterz picture and red information about the SPL and so on on the upper left corner... without starting... The USB connexion is not detected so I can't do anything... While trying to install any ROM, the USB connection is not detected ang I get an error message...
Did I kill my phone ?
Please help ! Tell me that it's not dead....

Don't worry, its nowhere close to being dead. If you have superCid, then use the SD card image to restore in bootloader mode. However, if the Cid is locked, then you would need a utility that can unlock Cid without Activesync mode (coz in your case, you would not be able to get an Activesync connection). imei-check.co.uk has a utility ($38 i guess) that unlocks Cid in bootloader.--- else show it to a professional. (in my country, I would have to shell out around $20 to get such a problem fixed at a mobile repair shop)

illanz said:
... The USB connexion is not detected so I can't do anything... While trying to install any ROM, the USB connection is not detected ang I get an error message...
Did I kill my phone ?
Please help ! Tell me that it's not dead....
Click to expand...
Click to collapse
Just take out the battery for about 10 minutes and re-insert. If it does not re-start, do a soft resert with the stylus and hopefully you should be fine

Hy,please help!
after downgrade, it doesnt work anymore.... i mean... i cant start the mobile!
after the downgrade i disable the USB data cable and now the mobile is dead... it doesnt starts from the ON/OFF Button and even if i connect the USB cable it makes nothing! No Led on... nothing! absolutly DEAD!!!

I have tried to put off the battery all night long with no result.. but I have achieved to reach the bootloader mode by pressing the camera button while soft reseting and keeping the camera button pushed...
OMG, I have been so scared ! ! !

Try this in order to reach the bootloader:
Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camara + Soft Reset, then release soft reset and KEEP PRESSING camara button till appear the Boot Loader.)

it doesnt work

I seem to have a simular problem. this is my post in another topic. It seems to fit better here.
This is what I tired so far:....
I used the RUU_Prophet_2151327_21513121_021921_DOP_ASIA_WWE_S hip-NoVendorID and it often hangs and was slow with Push Email over GPRS.
I tried to find a way to downgrade but hadn't had time sofar. When I logged on XDA Developers Site I saw there was a new Image.
So I thought Great I dont need to find how to downgrade.
I don't know what G4 and G3 is so as everybody let's try the higest best one.
I uploaded the RUU-Prophet-G4-AKU3.3-Jester-b1
Wrong...
Now as previously stated I get to the multicolor screen with IPL 2.09 and the SPL 2.20..0001 on the screen and that's it.
I can get to the bootloader and load the same image again and get the same result.
I can load another image on and it loads to 80 Percent and says error [326] Invalid Command This NBF cannot be used with your PDA Phone. Please check your NBF file.
If I try an older Version it tells me upgrad only
And when I try to upload the G3 version it tells me error[300] invalid upgrade tool. This upgrade utility canot be used for your PDA Phone. Please get newer Upgrade utility.
Trying to use the nf.nbf or the G3 with the ROMUpdateUtility_NoID of the G4 doesn't work either.
If I would like to do the downgrade tool I need a Active Sync connection which I don't have.
I have no more thoughts. Please Help.

If you would have just read the forums better you would have known if your device is a G3 or a G4. (read this!).
Now it appears you have tried both for an update. Which may possibly have bricked your phone.
But... first things first. Can you get into the bootloader? (read wiki HERE on how to do that).
If you can still get into the bootloader then there is still a possibility for updating.
Try upgrading with the latest Qtek rom (note: this is an official rom, this one works for both G3 and G4! And since it's the latest you should be able to upgrade to this one).
Instructions quoted from another post of me:
You could try the 2.20 qtek rom which seems to be working well for quite some people (found here).
Although you have to make sure you read that thread good and use the ROMUpdateUtility_NoID.exe (found here ) to upgrade.
Update instructions:
1: With the qtek 2.20 rom you need to extract the zip and the exe file in the zip with WinRAR.
2: Then there is one folder called 'OutputFile' and a folder called 'RUU_TOOLS'.
Inside the RUU_TOOLS there is prophet and in that one WWE, when you go through them and in the WWE folder you see a bunch of files (readme.doc, enterbootloader.exe etc etc).
You need to copy ROMUpdateUtility_NoID.exe to the WWE folder with all the files. And you also need to copy the 'nk.nbf' file to the WWE folder (from the 'OutputFile' folder).
3: And then you need to put your phone in bootloader mode and run ROMUpdateUtility_NoID.exe to upgrade, which should work nicely then.
Click to expand...
Click to collapse
This should give you a good enough idea of what to do. This should work (new rom combined with no NoID updater).
However, if it's impossible to get yourself into the bootloader your options of upgrading your device are getting smaller.
Downgrading of a complete rom is only possible on a CID unlocked G3 (when it's CID unlocked you would know! because you would have done that yourself) and not on a G4 device.
Flasing a G3 device with a G4 rom or G4 device with a G3 rom might possibly turn your phone into a brick. This can easily be avoided by reading the forums properly and know what you are doing.
If anything (even if it's a small thing) is not completely clear to you about upgrading/downgrading your device I'd recommend not doing so.
edit: oh yeah... if you have a G4 device (which you should know by now) you cannot downgrade from this rom (well, only via a payed online service). And when you have a G3 device you could try and CID unlock it (read wiki + forums) before you want to downgrade, or don't downgrade at all.
But whatever you do, don't try to downgrade it without doing any of those things because you'll get into trouble. (to put it down bluntly)

illanz said:
I have tried to put off the battery all night long with no result.. but I have achieved to reach the bootloader mode by pressing the camera button while soft reseting and keeping the camera button pushed...
OMG, I have been so scared ! ! !
Click to expand...
Click to collapse
If you have reached the bootloader screen, just run my installer (or any official ROM) to get your phone working again.

My Prophet Died
I need help, to restore my Prophet, i upgrade wrong rom, i need will try the SD Backup, where can i see this process ?
Sorry my Inglish is too bad.

I've merged a couple of threads under this one, as they are all about the same problem (mostly)
Opening a new thread for the same problem isnt very useful

Hi RaptorRVL
Thank you very much for your patience in resuming all this for me.
I do try to read the forum but it isn't like a manual where you find the procedure stepby step. Like the G3 and G4 version I have newer come across until now. Sorry.
I tried the image you metioned and I have the result that at 80% it tells me error [326] Invalid Command This NBF cannot be used with your PDA Phone. Please check your NBF file
Any more thoughts?
As you seem to be an expert Can you let me know more about goldcard solution.
Cheers
Mick

From a readme I once found inside an update:
* ERROR [320~328] : INVALID COMMAND
These errors seldom occur. However, if one of these errors occur, it could not be recovered and the device had to be sent back to the customer service center. In this case, you have to flash a new ROM code.
Click to expand...
Click to collapse
Doesn't sound too good really. Maybe someone else here on the forums know what to do with this error :/
You did use the ROMUpdateUtility_NoID.exe and not the normal updater right? Can remember someone getting a similar error when using the wrong updater, but I'm not sure about that though...
edit: try doing a search on the prophet forums for "INVALID COMMAND" maybe there is a helpful post in there somewhere...

THANKS!! I was worried b/c i had the same problem today. I've been looking for so many threads abt this problem. Thanks for ur help guys!

same problem
so i have the same problem. I want to downgrade and it break at 95% invalid file. But now XDA is still alive. I can`t go into the bootloader but i tried this file: RUU_Prophet_220734_2207114_024721_NVID.exe
and now my Prophet is still running again. Hope i can help you. Good luck.
peter paul
P.S. sorry for my english, but its good to learn it again

Please Help!! Phone Completely Bricked

I think I may be completely screwed but hopefully someone here can help me.
I tried running the shelltool program to flash to faria's wm6 rom and now my phone is completley bricked. It is stuck on the first screen when you power the device on, the screen that says T-Mobile and tells you what rom and radio version are installed on the phone.
I have tried running the RUU provided by T-Mobile and that didnt work and I have also tried re-flashing the rom using the shelltool program using the original rom. Nothing is working and I am desperate for help.
If anyone has any ideas, please help me as this is my only cell phone and I do not have the money to replace it.
Please, please help if you can.

dharvey4651 said:
I think I may be completely screwed but hopefully someone here can help me.
I tried running the shelltool program to flash to faria's wm6 rom and now my phone is completley bricked. It is stuck on the first screen when you power the device on, the screen that says T-Mobile and tells you what rom and radio version are installed on the phone.
I have tried running the RUU provided by T-Mobile and that didnt work and I have also tried re-flashing the rom using the shelltool program using the original rom. Nothing is working and I am desperate for help.
If anyone has any ideas, please help me as this is my only cell phone and I do not have the money to replace it.
Please, please help if you can.
Click to expand...
Click to collapse
Did you put the phone into bootloader mode? Turn it off (pull the battery if you have to). Then hold the camera button while you turn the phone on. You'll get the bootloader screen. From there you should be able to flash a rom. (I assume Shell Tools works here, but I don't know). Is your phone a G4 or a G3?. Safest thing is to flash the Wizard Love rom I'd assume. See the stickie at the top of the forum about how to flash as it has links and all...

Thank you so much man... You seriously save my A$$.

If you are not doing it already, I recommend to back-flash first to the latest vendor provided ROM, flash your radio ROM of choice if you want (optional), then finally flash the latest ROM. This ensures that you have a solid base to start out with.

ok I have completely rebooted the phone to the base rom provided by t-mobile but I am having trouble finding shelltool so that i can still flash the rom i really want.
right now it is the standard tmobile rom.
If you know where I can download shelltool so I can flash the custom rom i want then that would be great.

A little searching or looking at the topics would have gave you your answer.
http://forum.xda-developers.com/showthread.php?t=293480

mfrazzz said:
Did you put the phone into bootloader mode? Turn it off (pull the battery if you have to). Then hold the camera button while you turn the phone on. You'll get the bootloader screen. From there you should be able to flash a rom. (I assume Shell Tools works here, but I don't know). Is your phone a G4 or a G3?. Safest thing is to flash the Wizard Love rom I'd assume. See the stickie at the top of the forum about how to flash as it has links and all...
Click to expand...
Click to collapse
thank you thank you thank you.
PPCKitchen's BuildOS bricked my phone, and I had to do this to save it. I certainly won't muck with that app again.

Ok, please read the stickies before reflashing. Or you'll kill your device again.

Screen stuck on red green blue and white

First of all please be gentle! I am a complete novice and this is my first post. I have a Touch Pro on a Vodafone contract. I downloaded the recent ROM software upgrade from the Vodafone web site and began the transfer to my phone having followed all the advice. However, the download got stuck at 12% and no matter how many times I start over again it will not go past that point. Worst still the phone is now locked on a red/green/blue/white screen with the message "Upgrade ROM code error Please try again". the error message on the Vodafone software download is No 302. I have tried Vodafone technical help but as I was due for a new phone anyway they have sent me a Touch Pro 2 but don't seem to want to help me resolving the problem with my "old" phone. It is only 5 months old (replacement insurance phone) and in good condition but useless if it can't be made to work.
Can anyone help with simple instructions on how to download a ROM that will work. If not does anyone want to make me an offer for the phone? Currently locked on Vodafone but I am sure you guys out there have the skill to resolve that one.
Many thanks,
Hollybeau

So, they aren't asking you to send it back, I take it? If that's the case, then the first thing I would try would be to flash with the stock rom, if you can find it (not the upgrade that quit on you). If that doesn't work, then just try to flash hard spl. If hard spl goes through ok, you're golden and can flash any raphael rom you want. If it doesn't, the phone is probably toast. You got a new one, so just use the old one as artwork.

Thanks Farmer Ted,
Unfortunately I do not know the orginal stock ROM. It is not on the Vodafone web site and the HTC site keeps telling me that all the likely candidates are "not suitable" ( I assume this is beacuse it is some sort of Vodafone variant). I am afraid that "flash hardspl" means nothing to me - I told you I was a novice! Can you direct me to what and where please.
What bugs me is that here is a phone worth £200? but for a problem caused by Vodafone's buggy software upgrade.
Hollybeau

Start Here.
Best way to find everything you want to know about flashing ROMs.

Lol.
Hard SPL is a bootloader that allows you to flash any rom you want (not just vodaphone). It also has over-write protection, so if you get into the situation you're currently in, the phone won't be bricked. If you can flash it (make sure you flash the gsm version in the raph rom forum), you are fine and dandy.
If you can't find the stock rom online, you may be able to flash the upgraded rom off of your sd card (I believe this will work with a stock rom and stock spl, but am not 100% sure). Re-name the .nbh image file to RAPHIMG.nbh. Format your sd card (1-2 gb works best) to FAT32, and put the image on the root of the card. Go into bootloader (well, you're already there, you may not need to) by holding volume down and soft resetting. Hold vol. down until the tri-color screen appears. At the prompt, press the power button, and let the flash run its course. Soft reset when it says that the update was a success. Let the phone boot up until it gets to the the alignment screen, the hard reset and boot it up.
If you don't have an .nbh file, and instead have a .exe file from vodaphone/htc, then you should be able to extract the contents with either winrar or 7-zip (google) to get at the .nbh image file. I've done this before, and it works fine.

Many thanks to all who have replied. I have fixed the problem. It turns out that it was the download to my PC that was at fault. I downloaded the Vodafone software to my lap top and ran it from there and it has recovered the phone. I now have a spare, and working, Touch Pro. I may try the HardSPL and other ROMS just to use the phone as a test bed. Alternatively, anyone out there want to make me an offer?
Hollybeau

Hollybeau said:
Alternatively, anyone out there want to make me an offer?
Click to expand...
Click to collapse
Ask in market place and you will probably get some takers

[Q] wrong rom update, what now?

Hello everyone.
Yesterday I saw that there was a new update of my favourite rom EnergyRom. So today I downloaded it, installed it, everything went well. Until I restarted my Raphael ( raph300 btw). It kept stucking on the bootscreen.. even after I installed the rom again it still stucked at bootscreen. So I began trying to fix it with installing my hardSPL again, that didn't work either, still no further than my bootscreen.. after a while I decided to downgrade my spl to my stock-spl. that went well but still stuck on bootscreen. So I tried to install my stock-rom from my provider: (t-mobile netherlands). But then the Rom updater stuck at 0% and I received the well-known [262] error. Suddenly I saw that I stupidly accidentally installed the cdma version of EnergyRom instead of the one I needed: GSM. That explained why it wouldn't boot in the first place. Now I tried to install the olinex hardspl, but the updater stopped everytime with the 262 error. I connected my device to another computer with windows XP, but there I saw that the computer recognized it as a CDMA device.
I know it is a stupid mistake, but is there anybody who knows what I could try? I also tried to hard-reset it, but that wouldn't help either. Any help would SO be appreciated

try to search a tool called MTTY maybe it helps

lvxincad said:
try to search a tool called MTTY maybe it helps
Click to expand...
Click to collapse
Thanx, but how can I use this in combination with my problem?

As I remember 2 years ago,HardSPL is somehow depended on RadioROM. Maybe the ROM influenced the Radio with HardSPL,so try to reflash HardSPL again and Radio. Or it works absolutely not?
http://forums.techarena.in/hardware-peripherals/1161954.htm
http://forum.xda-developers.com/showthread.php?t=371154
http://htcwiki.wetpaint.com/page/RUU+Error+List

TomasNM said:
As I remember 2 years ago,HardSPL is somehow depended on RadioROM. Maybe the ROM influenced the Radio with HardSPL,so try to reflash HardSPL again and Radio. Or it works absolutely not?
http://forums.techarena.in/hardware-peripherals/1161954.htm
http://forum.xda-developers.com/showthread.php?t=371154
http://htcwiki.wetpaint.com/page/RUU+Error+List
Click to expand...
Click to collapse
No, I can't update any ROM. So now i'm stuck with my stock SPL, therefore I wanted to Hard SPL my device, but that didn't work and since then I haven't been able to update any ROM.. would flashing on a different PC help maybe? now I am on a Win7 Pc but maybe it will work in WinXP..

It is also not a bad idea to try different PC with XP to flash. I remember apx.1 month ago I tried to update HTC Trinity with WM6.5 ROM and it keeps failed with some errormessage(nowadays I can't remember which,but the syndroms was similar). Then I considered it as "bricked",until I tried another PC and everything wents correctly and the phone is in its productivity again. Yes,tfirst PC was company notebook with lot of safety kind of software(firewall,this,that,etc...) and the second one was my private laptop at home,just equipeed with regular antivirus software,all updates disabled(instead of AV).

Btw,what about trying to flash official ROM,while you are with stockSPL? Maybe it helps you to startup again the device and then HardSPL again afterwards...

TomasNM said:
Btw,what about trying to flash official ROM,while you are with stockSPL? Maybe it helps you to startup again the device and then HardSPL again afterwards...
Click to expand...
Click to collapse
yeah, that's what I thought too. I tried that also, also tried other custom roms btw before going to the stock rom. But with the stock rom it also stuck at 0% on the update

so, today I tried to flash my rom with two different computers: one with win7 and one with winXP. didn't work either.. I read the MTTY thread and after I installed the custom driver I was able to connect trough MTTY. But what commands should I use to clear the ROM and is there any way that I can update my rom via MTTY?

search MTTY on the forums the first link has all you need to clear the rom and flash via MTTY

I think you may be screwed. You should've asked for help before you started messing with the spl. I don't understand why you thought reverting to the stock spl would be a good approach; it may well be the end of your device. What you should have done is just flashed a stock rom-that would probably have restored your device. Re-flashing hard spl is kind of pointless. The only thing that can over-write hard spl is the special 'stock spl' that olinex put together. It's not entirely stock, and I am not sure that it can be over-written by hard spl. The sole purpose of the 'return to stock spl' is so that you can flash a stock rom, then restore the spl so that you can return your device for warranty/service without being dinged for having unofficial firmware on the device. When you do this, you aren't anticipating getting the device back, so I'm not sure that hard spl can over-write it. I know there have been discussions on whether or not it can be over-written, but I'm not sure that there was ever a clear answer. Anyway, with the 'stock spl' on the device, you can't flash any cooked roms to the device. If you are very lucky, you may be able to flash a stock rom. So, my advice is to try a few stock roms.
I'm pretty sure you'll need hard spl to run mtty/task 29, so I wouldn't waste your time on that. I really doubt it works, and I'm not sure what it's going to buy you, anyway. You really need to be able to flash a rom to the device, and you can't flash a cooked rom with that spl. Maybe you can flash a stock rom, but maybe not. I'm not sure which carrier it will let you upgrade to, either.

NeoTokyo22 said:
search MTTY on the forums the first link has all you need to clear the rom and flash via MTTY
Click to expand...
Click to collapse
yes I did, but the problem is that I can't access my Internal Storage, so I can't put any ROM's on that. Tonight I tried to flash a ROM via my SD card, but when I put my device in bootloader-mode it kept saying that it was 'loading...'

If the bootloader just says 'loading', then you probably need to either reformat the card to FAT32 or rename the image to RAPHIMG.nbh. Make sure you get the extension correct (not RAPHIMG.nbh.nbh).
But you're not going to flash anything with the stock spl, anyway. You need hard spl. I'm not sure you can even flash a stock rom off of the sd card-it probably needs to do it over usb.

I updated lot of smartphones already,but it was already few years ago. However I think,that SP's are flashed with MTTY. For that I needed ROM image in nbh file and with some commands you tell the PC,that it should flash it. Don't forget to disable USB connection in Activesync on XP in case MTTY will connect.

TomasNM said:
I updated lot of smartphones already,but it was already few years ago. However I think,that SP's are flashed with MTTY. For that I needed ROM image in nbh file and with some commands you tell the PC,that it should flash it. Don't forget to disable USB connection in Activesync on XP in case MTTY will connect.
Click to expand...
Click to collapse
I already managed to connect my device with MTTY, the only thing I need to know is which commands I can use to flash the ROM through MTTY. It just sucks that I am not able to go to my Internal Storage, otherwise it would be much simpler I think.

Farmer Ted said:
I think you may be screwed. You should've asked for help before you started messing with the spl. I don't understand why you thought reverting to the stock spl would be a good approach; it may well be the end of your device. What you should have done is just flashed a stock rom-that would probably have restored your device. Re-flashing hard spl is kind of pointless. The only thing that can over-write hard spl is the special 'stock spl' that olinex put together. It's not entirely stock, and I am not sure that it can be over-written by hard spl. The sole purpose of the 'return to stock spl' is so that you can flash a stock rom, then restore the spl so that you can return your device for warranty/service without being dinged for having unofficial firmware on the device. When you do this, you aren't anticipating getting the device back, so I'm not sure that hard spl can over-write it. I know there have been discussions on whether or not it can be over-written, but I'm not sure that there was ever a clear answer. Anyway, with the 'stock spl' on the device, you can't flash any cooked roms to the device. If you are very lucky, you may be able to flash a stock rom. So, my advice is to try a few stock roms.
I'm pretty sure you'll need hard spl to run mtty/task 29, so I wouldn't waste your time on that. I really doubt it works, and I'm not sure what it's going to buy you, anyway. You really need to be able to flash a rom to the device, and you can't flash a cooked rom with that spl. Maybe you can flash a stock rom, but maybe not. I'm not sure which carrier it will let you upgrade to, either.
Click to expand...
Click to collapse
Oke, thanx for your input. I tried to reset my ROM memory with mtty/task 29, but that didn't work, just like you predicted. So my next question is: 'Is there any app that can perform the task 29 without MTTY?'. I googled it, but I could only find the task 29 app for the HTC HD2.. And further, does anybody have a recovery ROM for my RAPH300? I tried the stock ROM on the XDA thread of HTC Raphael, but still got the 262 error

There's really no point in doing Task 29. The bad rom isn't what's killing you now, it's the SPL. It's going to block task 29, no matter what you try (that's one of it's jobs). You should just try to get hard spl back on the device, or try flashing every stock rom you can find. I tend to doubt that either will work, though. The only other option would be to look up the jump spl developed by PoF. I don't remember the name (search for threads started by him), but it was a universal soft spl that would temporarily CID unlock devices so you could flash custom roms. I've never used it before, and I don't know how it loads. You may not be able to load it onto your device with its current state, and it may not even be compatible with a Raphael (it's 3 or so years old), but it's probably worth at least checking out.
Edit: here's the jump spl link. I think you may have to activate it off the device.

[Solved]Error upgrading Radio ROM, how to fix

Hi all,
I tried to flash my TPro with Blackstone Radio 1.13.25.24 downloaded from Wiki-Raphael_ExtractedRadioRoms
After the update get to 100%, the phone gets stuck on tricolor flashing screen with a message "Upgrade ROM code error Please try again"
Please anybody have an idea what might go wrong, and how can I fix this?
Thanks a lot!
Update:
Look like I didn't do Security Unlocked before flashing!!! Damned stupid!! How can I fix this, anyone? Thanks

If a soft reset didn't fix it (sounds like it didn't), then you should flash a stock touch pro rom, preferably the one for your particular device. I don't really understand why anything happened if you weren't security unlocked. You should just be able to soft reset. Hopefully you already have hard spl.
The new raphael radios (1.14's) are pretty good, imo, are worth trying.

Thanks for the reply, Ted!
You are right, soft reset doesn't help.
I had HardSPL 1.90.OliNex so hopefully I still can fix my phone.
As I digging through XDA, I found one thread that I think it is relevant to my problem.
ttp://forum.xda-developers.com/showpost.php?p=1951338&postcount=11
In the thread, member dwny wrote
If the Rom has issues.....the flash will not complete and the device will be stuck in BootLoader Mode. At this point,you must FLASH a FACTORY ROM!!
Pop the battery off 1st, power up the device, device will power up in BootLoader Mode, connect to pc & FLASH your devices FACTORY ROM. This will restore your device back to it's original out the box settings.
The above only works if the device has been put through the Hard SPL or SuperCID process.
Click to expand...
Click to collapse
Sounds pretty much like my problem and possible solution. I think I will try it when I get home from work.
One thing I need to ask it, if my phone is stuck in BootLoader, will it be able to sync with the PC, and then got flashed?
Sorry if the question is stupid
Thanks a lot!
Update
And my TPro is safe and sound now! Here is how I did it:
1. Enter the bootloader mode
ttp://forum.xda-developers.com/wiki/index.php?title=Raphael_For_Beginners
2. Connect the phone with PC using USB
3. Flash the phone with the HTC ROM named RUU_Raphael_hTC_Asia_WWE_5.07.707.2_Radio_Signed_Raphael_52.58.25.30_1.11.25.01_Ship.exe. Based on suggestions of dwyn.
4. After flashing the phone was fully functional.
I flashed the phone again with Energy ROM-Titanium 07-Sept, and it works flawlessly. Cheers!
Thanks for the great knowledge-base of XDA community!