Related
I think I put myself in a bad situation here...
I spent all day trying to figure out how to root my 5 week old Nexus as it's tethering ability is my only access to the web.
So - step one, I did the one-click method, as the instructions I was finding for "the long way" were written by people who know what they're doing FOR people who know what they're doing.
Once that was accomplished, I downloaded Rom Manager. Unfortunately Rom Manager didn't seem to want to work with One-Click's style of rooting, locking me on the boot screen every time I tried using it.
So, I finally worked out how to root my phone the "normal" way and Rom Manager was working.
Here's where my mistake came in... I was one part frustrated from how long it took me to figure it all out, one part elated that I finally DID figure it out, so I immediately put Cyanogenmod on my phone... without backing it up. I played with it a bit, but realized my mistake, so downloaded the 2.3.3 Stock Rom.
That totally futzed things up for me... First, my USB connection isn't working anymore. The USB cable still powers my phone, and the USB ports on my PC still work, but I can't get a phone to pc connection through USB anymore.
Second, my cell radio isn't working anymore, I can only get anything over wifi. The OTA 2.3.4 update was pushed and installed to me that way (The current version my phone is on now...)
Third, apparently my phone was no longer rooted, so Rom Manager wouldn't work anymore for me. When I go to the bootloader menu and try to Recover, it brings me to an android with a triangle and exclamation point symbol.
Once there, some trial and error brought up a menu that I'd hoped would have let me reroot or reinstall a working Rom, but every one I try gives me a Signature Verification error and aborts the install...
So, I'm stuck... Without my USB connection working, I can reroot my phone, and without rerooting, I can't get a working ROM back in place. If ANYBODY can help me with this, it will be greatly appreciated. If any additional information is needed, I'll do my best to give it. Thank you...
Who is your carrier? Need to know which phone you have.
Also I assume that since you said you rooted the hard way eventually, that means you successfully used Fastboot to unlock your bootloader, yes?
The Android with exclamation point is just the stock Android recovery partition.
The key to fixing your problem will be to get USB connection between phone and PC.
Please plug in your phone to USB connected to your computer, then put your phone into Bootloader mode (Power on while holding Volume Up). On your computer, open a command prompt window and type "fastboot devices" and post what it says.
Can you see the phone in fast boot by usb also have you course factory reset and then try to flash
Sent from my Nexus S 4G using Tapatalk
The big problem is that I'm unable to make a USB connection anymore. My phone is not reading any kind of connection to allow for file transfers or debugging, but it still powers the phone.
TBoarder said:
The big problem is that I'm unable to make a USB connection anymore. My phone is not reading any kind of connection to allow for file transfers or debugging, but it still powers the phone.
Click to expand...
Click to collapse
Can you answer my question about fastboot? I want to help you.
matt2053 said:
Who is your carrier? Need to know which phone you have.
Also I assume that since you said you rooted the hard way eventually, that means you successfully used Fastboot to unlock your bootloader, yes?
The Android with exclamation point is just the stock Android recovery partition.
The key to fixing your problem will be to get USB connection between phone and PC.
Please plug in your phone to USB connected to your computer, then put your phone into Bootloader mode (Power on while holding Volume Up). On your computer, open a command prompt window and type "fastboot devices" and post what it says.
Click to expand...
Click to collapse
I did that and nothing came up.
TBoarder said:
I did that and nothing came up.
Click to expand...
Click to collapse
ok can you please install PDAnet on your computer?
http://junefabrics.com/android/download.php
This will ensure the proper must up to date drivers are installed for you. This is the best and most reliable way to get the correct drivers.
EDIT: Then try fastboot again and tell me the output for "fastboot devices"
matt2053 said:
ok can you please install PDAnet on your computer?
This will ensure the proper must up to date drivers are installed for you. This is the best and most reliable way to get the correct drivers.
EDIT: Then try fastboot again and tell me the output for "fastboot devices"
Click to expand...
Click to collapse
It was already installed, but I reinstalled it. I got to the end of the process where it asked me to go into USB Debugging mode and won't finish the install because it's not reading the USB connection.
(Sorry for any delays here... Being a newbie, I have a 5 minute delay between when I can post)
No worries, thanks for trying. If you have hardware failure you might be out of luck. USB connection is pretty crucial for this stuff.
Maybe you can try Odin. See here: http://forum.xda-developers.com/showthread.php?t=947950
matt2053 said:
No worries, thanks for trying. If you have hardware failure you might be out of luck. USB connection is pretty crucial for this stuff.
Maybe you can try Odin. See here:
Click to expand...
Click to collapse
I've been looking into Odin, to see if there's a way I can do it just by pushing the files I need to my phone's sdcard and going into recovery mode. Not looking likely, but I'll read through the thread you linked me and maybe something will pop up. Thank you...
On the plus side, I just contacted Sprint and I *might* be able to get my phone replaced... Much as I'd like to troubleshoot this myself, it's looking like my only option. Too bad getting a phone replaced this early in a contract, just out of the warranty period is a total pain in the neck...
TBoarder said:
I've been looking into Odin, to see if there's a way I can do it just by pushing the files I need to my phone's sdcard and going into recovery mode. Not looking likely, but I'll read through the thread you linked me and maybe something will pop up. Thank you...
On the plus side, I just contacted Sprint and I *might* be able to get my phone replaced... Much as I'd like to troubleshoot this myself, it's looking like my only option. Too bad getting a phone replaced this early in a contract, just out of the warranty period is a total pain in the neck...
Click to expand...
Click to collapse
Can you post a link to the stock image you installed?
Was there ever a 2.3.3 for the nexus s 4g? Seems like it shipped with 2.3.4
Sent from my SPH-P100 using XDA App
matt2053 said:
Can you post a link to the stock image you installed?
Click to expand...
Click to collapse
It was downloaded through ROM Manager.
And yes, if I could get back into ROM Manager, I'd warn people NOT to flash their ROM to that. Bad mojo there.
My suggestion is to try and use Odin to flash it back to stock, I don't think Odin needs any drivers to see the phone...
Sent from my Nexus S 4G using XDA Premium App
TBoarder said:
It was downloaded through ROM Manager.
And yes, if I could get back into ROM Manager, I'd warn people NOT to flash their ROM to that. Bad mojo there.
Click to expand...
Click to collapse
Yeah see the thing is there is no 2.3.3 for NS4G. If you flashed 2.3.3 that means you flashed a GSM Rom on your CDMA phone. Oops! not the first time it has happened I'm sure.
Sent from my Nexus S using XDA App
Which totally explains what went wrong... Wow. ROM Manager, I though, was supposed to only bring up ROMs that are compatible with your phone model. Any way somebody can either let the developer know about this, or at the very least put a comment in the 2.3.3 ROM that specifically says it won't work with Sprint's network? That way nobody else will go through the hell I put myself through...
I'm wondering, could the USB connection issue be connected, like the "program" that controls that is integrated with the radio? Just curious, is all. Thanks again for your help!
How did you find astock 233 rom in rom manager, I only see cyanogen nighties oxygen, peter alphonso, extras etc everything is for the nexus a 4g
Sent from my Nexus S 4G using Tapatalk
TBoarder said:
Which totally explains what went wrong... Wow. ROM Manager, I though, was supposed to only bring up ROMs that are compatible with your phone model. Any way somebody can either let the developer know about this, or at the very least put a comment in the 2.3.3 ROM that specifically says it won't work with Sprint's network? That way nobody else will go through the hell I put myself through...
I'm wondering, could the USB connection issue be connected, like the "program" that controls that is integrated with the radio? Just curious, is all. Thanks again for your help!
Click to expand...
Click to collapse
Yeah. I have the T-Mobile version. When I download through Rom Manager I get a popup that says "select your phone model" or something similar and then two choices: "Nexus S" or "Nexus S 4G". It would be really easy to mess that up.
The good news is that I believe your phone can still be recovered, you're definitely not the first person with this exact issue, and at worst, it sounds like you have a Sprint rep who is willing to work with you. I think Odin is your only chance for a software solution. I can't walk you through Odin though, because I've never used it myself.
Let me know what happens.
Sent from my Nexus S using XDA App
matt2053 said:
Let me know what happens.
Sent from my Nexus S using XDA App
Click to expand...
Click to collapse
I just got my warranty replacement phone due to an abnormally long backorder. Thank you very much for your help (And well, I would've more appreciated it if you hadn't shown me that the problem was all my fault... ). Being my only phone and being poor, I won't be trying to root again, no matter what I learned from this problem. Anyway, thanks again, the help was, in all seriousness, greatly appreciated.
Good morning all, I have two seperate issues.
1. My USB is no longer being recognized by my Mac, so I can't unroot, thus making customer service a non-option.
2. Neither the manual 2.3.5 nor the OTA 2.3.5 will install to my device, resulting in the android with the exclamation mark screen.
My phone is rooted, not running a custom ROM, but running netarchy's kernel. The problem is that I can't update OTA because my phone is rooted and I can't unroot my phone because USB storage is no longer recognized. Thoughts?
Use Wifi file explorer to acces sdcard
Sent from my Nexus S using XDA App
To unroot?
Sent from my Nexus S 4G using Tapatalk
Hmm.... can you try flashing a different rom just to get usb access?
I had that problem once where usb could not get recognized on any computer, neither usb debugging. I actually got it fixed by Samsung, but I have a feeling your issue can be fixed.
So if flashing a custom rom gets you usb access, then you can easily unroot from there. If that doesnt work, try to flash a different kernel.
Going to give custom rom access a shot. I may need a USB free unroot solution though, so that Samsung will fix it.
Sent from my Nexus S 4G using Tapatalk
Yep, just try that and see.
If not, try a different kernel...
If that doesnt work, then you might need to contact samsung lol
mathkid95 said:
Yep, just try that and see.
If not, try a different kernel...
If that doesnt work, then you might need to contact samsung lol
Click to expand...
Click to collapse
CM7 nightlies don't give me USB access, nor do different kernels. Going to nandroid and do a factory reset. Maybe then the OTA 2.3.5 will install and break root, allowing me to give Samsung an unrooted phone to repair.
**** me.
Well do you get the ota even though you are rooted? If so, idk if it will break root.
I do, but when I restart to install, it freezes.
Sent from my Nexus S 4G using Tapatalk
Hmm... yeah, I'd say take it in for repair and see what's up.
There's the slight problem of a voided warranty.
Sent from my Nexus S 4G using Tapatalk
Sprint is mailing me a new device, so it's going to be a James Bond flick trying to unroot this old one before I have to return it. Seriously? My little Hero lasted a year and a half with zero hardware issues. Hell, it still works!
Sent from my Nexus S 4G using Tapatalk
Hey
i've been trying to find a custom rom that i can install onto my completely stock sgs2 lte without connecting to pc and flashing with odim. My phone is apparently defected and cannot connect to pc, trying to install custom rom might fix the issue. the phone is completely stock, not even rooted.
can someone direct a link to that rom?
thanksks!
the only way as far as I know is to hook it up to PC. Mine did the same thing. Wouldn't register on a PC. I tried various cables until I found one that would work. That's the best advice I can give you.
Sent from my Xoom using xda premium
Try different USB Ports and different cables or another computer.
Sent from the Sammich
If your rom version support the zerg rush rooting method you can do it, install cwm and flash a rom from there.
I never had to flash anything using odin, tried using odin only once and even then I dont think it recognized my phone due to bad kies drivers(which I have fixed by now).
you do have the correct drivers installed right? More info in your first post would be an advantage to those trying to help
Sent from my Xoom using xda premium
Also like the last guy I just thought about it could be your kies installed **** drivers, happened to me the first time, couldn't connect the phone to the pc but it worked great on the mac try completely uninstalling kies and the usb drivers and installing them from scratch.
flickoff613 said:
Hey
i've been trying to find a custom rom that i can install onto my completely stock sgs2 lte without connecting to pc and flashing with odim. My phone is apparently defected and cannot connect to pc, trying to install custom rom might fix the issue. the phone is completely stock, not even rooted.
can someone direct a link to that rom?
thanksks!
Click to expand...
Click to collapse
Download wifi file transfer peo and start loading up the phone without ever connecting it. I've never had to connect the phone to the pc ever since I stated using that app.
Everything is mobile Odin or CWM now right off the sd card and wifi for data.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Get dolphin browser hd from the market. U can download anything u want just like on a pc.
I download my roms directly to my devices. No dealing with a usb cable or pc
kr3w1337 said:
Download wifi file transfer peo and start loading up the phone without ever connecting it. I've never had to connect the phone to the pc ever since I stated using that app.
Everything is mobile Odin or CWM now right off the sd card and wifi for data.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Click to expand...
Click to collapse
We are supported by mobile Odin?
Sent from my Xoom using xda premium
roughneckboren said:
the only way as far as I know is to hook it up to PC. Mine did the same thing. Wouldn't register on a PC. I tried various cables until I found one that would work. That's the best advice I can give you.
Sent from my Xoom using xda premium
Click to expand...
Click to collapse
yes i have tried various cables as well as a search result, doesn't seem to budge.
xcrazydx said:
Try different USB Ports and different cables or another computer.
Sent from the Sammich
Click to expand...
Click to collapse
yes i have tried different ports and as well as installing kies / drivers on different computers including windows xp, windows vista, windows 7, no conclusion.
roughneckboren said:
you do have the correct drivers installed right? More info in your first post would be an advantage to those trying to help
Sent from my Xoom using xda premium
Click to expand...
Click to collapse
yep i tried every single driver for the sgs2 lte that i can search on xda.
kishke said:
Also like the last guy I just thought about it could be your kies installed **** drivers, happened to me the first time, couldn't connect the phone to the pc but it worked great on the mac try completely uninstalling kies and the usb drivers and installing them from scratch.
Click to expand...
Click to collapse
i've tried that but never tested on mac because i dunno anyone that has a mac nearby lol.
i have contacted samsung, they said its defected so send it in for repairs, since i dont have warranty they'd charge me up the ass. Its funny because they asked me why do i need to plug to pc, i simply said music, photo... shoulda been like TO MOD YOUR ****.
more or less, i have last resort to sell it on kijiji and buy another same model off kijiji, hoping its not defected. the sgs2 is a sweet phone, real talk lol
silver03wrx said:
Get dolphin browser hd from the market. U can download anything u want just like on a pc.
I download my roms directly to my devices. No dealing with a usb cable or pc
Click to expand...
Click to collapse
i dont have a problem with getting roms onto my phone, i have a microsd adapter that i use to transfer, just issue is if can get pass the stupid E:signature vertification failed on the recovery upgrade from zip that be awesome, but that means i have to root, but how do i root without the pc..
Whats your rom version?
Android version:
2.3.5
Baseband version:
I727RUXKJ7
Kernel version:
2.6.35.11
Build number:
GINGERBREAD.RUXKJ7
Sigh!! Its so easy with the galaxy ace, rooting and unrooting and installing cmw, all with the stock recovery, which we have on this phone, I was tempted to try it on my 1727 just wanna root so I can freeze the wifi manager with TB.
flickoff613 said:
Android version:
2.3.5
Baseband version:
I727RUXKJ7
Kernel version:
2.6.35.11
Build number:
GINGERBREAD.RUXKJ7
Click to expand...
Click to collapse
So it's pretty easy, use think to root your phone http://forum.xda-developers.com/showthread.php?t=1321582
Then download rom manager and install CWM.
Then just flash everything you want with CWM without the need for a cable.
kishke said:
So it's pretty easy, use think to root your phone http://forum.xda-developers.com/showthread.php?t=1321582
Then download rom manager and install CWM.
Then just flash everything you want with CWM without the need for a cable.
Click to expand...
Click to collapse
Yeah i think ill just sell the phone, how am i going to use easy root when i said my pc wont even recognize my phone, yes it is easy if i can get it to connect....
kishke said:
So it's pretty easy, use think to root your phone http://forum.xda-developers.com/showthread.php?t=1321582
Then download rom manager and install CWM.
Then just flash everything you want with CWM without the need for a cable.
Click to expand...
Click to collapse
Yeah i think ill just sell the phone, how am i going to use easy root when i said my pc wont even recognize my phone, yes it is easy if i can get it to connect....
Oh your right totally forgot about needing a pc for this >< my mistake.
BUMP
Hi, I want some help with this same issue. I'm not sure what forum etiquette is here, whether you guys prefer a bump of an old thread or that I just start a new one??
Anyway my phone is wigging out so I wanted to wipe and flash but I can't figure out how to do this since no PC/cord combo will recognize my phone, though it still charges. I wanted to use ROM Manager to flash OTA, but I can't since I can't figure out how to get cwm installed ota. I've been digging around the forum and googling for a couple days now to no avail.
Version - 2.3.5
Baseband - I727UCKJ2
Kernel - 2.6.35.11
It was rooted but I never flashed any roms. It randomly shuts itself off and upon a battery pull will get stuck in Odin dl mode? If i do a batt pull after that it will go straight back to Odin dl mode or it get's stuck in a vibration loop. Sometimes if I plug it in it will start up with a dead battery though?
Any ideas?
Should I just make a new thread on this??
clean the usb port on the phone, then the usb shall connect, i had the same prob its fixed now
Install Odin and see if it "sees" the phone in d/l mode.
Sent from my SAMSUNG-SGH-I727 using xda premium
I have a Samsung Galaxy S2 Skyrocket (SGH-I727 / AT&T) that I cannot get to connect to a PC after weeks of trying. I have tried to read through hundreds of threads regarding this issue and it seems others have had similar issues but nothing quite like this.
When I connect my phone to a PC, it does charge but Windows XP or Windows 7 will not recognize the phone. Anytime it is connected an error pops up stating "USB Device Not Recognized. One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it."
So to clarify, I have tried the following suggestions from others to troubleshoot and try to narrow down the issue:
1.) I have tried 4 separate USB cables, including the original OEM Samsung brand data cable that came with the phone.
2.) I have tried 3 separate PC's (2 with Windows 7, 1 with Windows XP).
3.) I have installed Samsung Kies on all 3 PCs, uninstalled and reinstalled the program as well as the Samsung Drivers on multiple occasions.
4.) I have done a factory/data reset on the phone twice to see if this was an issue caused by other apps I've downloaded in the past.
5.) I have tried to use USB Debugging/Developer option and then connect the phone to no avail.
6.) I have tried USB Mass Storage option before connecting the phone.
7.) I have tried to connect the phone to a PC in Samsung's default recovery mode and still showed it was not a recognizable device.
8.) I have tried a friend's galaxy S3 on all cables and PC's mentioned above and Kies immediately recognizes her phone.
9.) I have attempted to clean the physical microusb port with a small brush to make sure the contacts were clean and not being blocked by something.
10.)I have done a battery pull and about 20+ phone resets for all above mentioned attempts.
Based on all of these attempts without any success, it seems to me that this being a PHONE hardware issue is highly probable. I've ruled out just about every other scenario and I'm wondering at this point if my phone's Micro USB port is fried somehow.
Has anyone heard of this or is this a reasonable possibility?
I have tried just about everything I can so far, if anyone has any other suggestions or has any information that may confirm my suspicion, please let me know.
This all came about in the past week due to Jelly Bean being finally released by AT&T / Samsung for the Skyrocket and unfortunately, this update only seems to be available via Kies and a direct data cable to a PC. I have tried to go to Settings > About Phone > Software Update > Check for Updates (while connected to Wifi with a full battery) and the phone has told me 3 times over the past 3 days that my current Ice Cream Sandwich v4.0.4 Android is the most current software up to date. I'm guessing they're not planning on releasing Jelly Bean to the Skyrocket via OTA air updates....so now I'm stuck.
Bizarre issue you got there mate!
Sorry to disappoint you, but this isn't the right section for your device.
Please report ur post to the moderators and have it moved here:
http://forum.xda-developers.com/forumdisplay.php?f=1372
Thank you..
"To err is human, to forgive is divine"
Sent from my SGS II
immortalneo said:
Bizarre issue you got there mate!
Sorry to disappoint you, but this isn't the right section for your device.
Please report ur post to the moderators and have it moved here:
http://forum.xda-developers.com/forumdisplay.php?f=1372
Thank you..
"To err is human, to forgive is divine"
Sent from my SGS II
Click to expand...
Click to collapse
you sent him to the i777 forum?
as to op, seems a bad/dead usb port
read this on installing stock firmware even w/a dead usb port http://forum.xda-developers.com/showthread.php?p=29977559#post29977559
vincom said:
you sent him to the i777 forum?
as to op, seems a bad/dead usb port
read this on installing stock firmware even w/a dead usb port http://forum.xda-developers.com/showthread.php?p=29977559#post29977559
Click to expand...
Click to collapse
Wow, thank you so much. This is the first thing I've seen from anyone regarding a possible fix outside of direct USB connection. I sincerely appreciate it!
xyberelite said:
Wow, thank you so much. This is the first thing I've seen from anyone regarding a possible fix outside of direct USB connection. I sincerely appreciate it!
Click to expand...
Click to collapse
You should also try a different computer if you can. It works on my laptop but not my pc. I have no idea why and have tried everything I can think of. Also, use the usb ports on the back of the computer, not the front
Edit: sorry I didn't read your whole post.
Sent from my SAMSUNG-SGH-I727
You should probably hit this.
vincom said:
you sent him to the i777 forum?
as to op, seems a bad/dead usb port
read this on installing stock firmware even w/a dead usb port http://forum.xda-developers.com/showthread.php?p=29977559#post29977559
Click to expand...
Click to collapse
Well after getting into the details on the post, it looks like this is created for a phone that already has a custom recovery such as CWM or TWRP installed. Since I do not have a USB port to use on this phone as of right now, is there any way to install a custom recovery on my phone without using USB?
I did download the stock 4.1.2 Jelly Bean firmware directly on the phone's default directory already and it's sitting there in a zip format. If I'm not able to root and/or install a custom recovery without using a USB cable, would it be possible to install the stock firmware using the default samsung recovery mode?
xyberelite said:
Well after getting into the details on the post, it looks like this is created for a phone that already has a custom recovery such as CWM or TWRP installed. Since I do not have a USB port to use on this phone as of right now, is there any way to install a custom recovery on my phone without using USB?
Click to expand...
Click to collapse
Yes you need to search the skyrocket threads the answer is out there.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xyberelite said:
Well after getting into the details on the post, it looks like this is created for a phone that already has a custom recovery such as CWM or TWRP installed. Since I do not have a USB port to use on this phone as of right now, is there any way to install a custom recovery on my phone without using USB?
I did download the stock 4.1.2 Jelly Bean firmware directly on the phone's default directory already and it's sitting there in a zip format. If I'm not able to root and/or install a custom recovery without using a USB cable, would it be possible to install the stock firmware using the default samsung recovery mode?
Click to expand...
Click to collapse
no afaik, but read below
mtdew said:
Yes you need to search the skyrocket threads the answer is out there.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
if there is ive never seen it, let us know how, that is how to install a rom/firmware w/out custom recovery and w/a dead usb port
Crap if he's bone stock then no if it were stock rooted he could use dd commands with terminal emulator.
Also nowhere in his description did he ever say he deleted the old drivers from device manager.
Also I'm wondering how you are installing these drivers.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
vincom said:
no afaik, but read below
if there is ive never seen it, let us know how, that is how to install a rom/firmware w/out custom recovery and w/a dead usb port
Click to expand...
Click to collapse
Well I did find this older thread that will supposedly allow me to install CWM and root without using a USB cable or PC. I'm going to try this since you all have confirmed that I'm not able to install a stock firmware/rom using stock recovery.
http://forum.xda-developers.com/showthread.php?t=1501719
Edit - Didn't work, apparently this was for 4.0.3, not 4.0.4.
I'm going to need to figure out how to root and get CWM on my phone just to install Stock Jelly Bean all without using a USB cable. Still no luck so far.
mtdew said:
Crap if he's bone stock then no if it were stock rooted he could use dd commands with terminal emulator.
Also nowhere in his description did he ever say he deleted the old drivers from device manager.
Also I'm wondering how you are installing these drivers.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I initially thought he had cwm/twrp installed
xyberelite said:
Well I did find this older thread that will supposedly allow me to install CWM and root without using a USB cable or PC. I'm going to try this since you all have confirmed that I'm not able to install a stock firmware/rom using stock recovery.
http://forum.xda-developers.com/showthread.php?t=1501719
Edit - Didn't work, apparently this was for 4.0.3, not 4.0.4.
I'm going to need to figure out how to root and get CWM on my phone just to install Stock Jelly Bean all without using a USB cable. Still no luck so far.
Click to expand...
Click to collapse
that's not for our phones, that would of bricked ur device if it had flashed successfully
get ur usb port fixed or try some tips in fixing it in the 1stop sticky
edit: try this http://forum.xda-developers.com/showpost.php?p=34906725&postcount=6
vincom said:
I initially thought he had cwm/twrp installed
that's not for our phones, that would of bricked ur device if it had flashed successfully
get ur usb port fixed or try some tips in fixing it in the 1stop sticky
edit: try this http://forum.xda-developers.com/showpost.php?p=34906725&postcount=6
Click to expand...
Click to collapse
It wouldn't work. Nothing will install in Android System Recovery <3e>. Everything I tried still came back with Signature Verification Failed.
I also tried lifting the "tongue" inside the usb port on the phone several times previously and that didn't work either. I must assume at this point the usb daughterboard or something inside is messed up.
Since stock recovery can't install any type of files and I can't connect the phone to a PC in any way and my phone is 100% stock without root or any custom recovery, I can only imagine I'm stuck in this situation. I have yet to see any solutions for getting root or installing CWM without having a USB connection that works. Unless I can do either of those things, it looks like I'm SOL for updating from ICS to JB.
If they had only made Jelly Bean an Over the Air update, none of this would be a problem really.
xyberelite said:
It wouldn't work. Nothing will install in Android System Recovery <3e>. Everything I tried still came back with Signature Verification Failed.
I also tried lifting the "tongue" inside the usb port on the phone several times previously and that didn't work either. I must assume at this point the usb daughterboard or something inside is messed up.
Since stock recovery can't install any type of files and I can't connect the phone to a PC in any way and my phone is 100% stock without root or any custom recovery, I can only imagine I'm stuck in this situation. I have yet to see any solutions for getting root or installing CWM without having a USB connection that works. Unless I can do either of those things, it looks like I'm SOL for updating from ICS to JB.
If they had only made Jelly Bean an Over the Air update, none of this would be a problem really.
Click to expand...
Click to collapse
Too dangerous the ota bricks tons of people when they do it I can only assume at&t is tired of it and opts for kies only. Also you could buy a daughter board and replace it. It's a relatively easy fix.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
mtdew said:
Too dangerous the ota bricks tons of people when they do it I can only assume at&t is tired of it and opts for kies only. Also you could buy a daughter board and replace it. It's a relatively easy fix.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
So .... lesson learned here is that you CANNOT root a phone or install any custom recoveries such as CWM or TWRP without having a working USB connection. As a result, you CANNOT install any updates, stock firmwares and especially custom roms without the above.
Only option at this point is to order the replacement part for the USB port on the phone or to purchase a new phone (if it's outside of the warranty period).
xyberelite said:
So .... lesson learned here is that you CANNOT root a phone or install any custom recoveries such as CWM or TWRP without having a working USB connection. As a result, you CANNOT install any updates, stock firmwares and especially custom roms without the above.
Only option at this point is to order the replacement part for the USB port on the phone or to purchase a new phone (if it's outside of the warranty period).
Click to expand...
Click to collapse
No you need USB to root that's it technically. If you have root you can install a recovery IMG without a computer using a terminal emulator and dd commands.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Thanks for the update. Hopefully it will help others:thumbup:
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
mtdew said:
No you need USB to root that's it technically. If you have root you can install a recovery IMG without a computer using a terminal emulator and dd commands.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
yes and no, its the chicken and the egg kind of question, for the sr to get root u need to flash the su files, but u need to have a custom recovery to flash the su files. is there a way to get the su files onto the sr w/out a custom recovery? I haven't seen one yet unless there was a oneclick method which I never used
vincom said:
yes and no, its the chicken and the egg kind of question, for the sr to get root u need to flash the su files, but u need to have a custom recovery to flash the su files. is there a way to get the su files onto the sr w/out a custom recovery? I haven't seen one yet unless there was a oneclick method which I never used
Click to expand...
Click to collapse
I used a one click waaaaaaaaay back when the phone was released probably wasn't supported lol but this was long ago on 2.3.5.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
mtdew said:
I used a one click waaaaaaaaay back when the phone was released probably wasn't supported lol but this was long ago on 2.3.5.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
There is no one click available for 4.x forward.
I am wondering, however, if something like this would work:
http://forum.xda-developers.com/showthread.php?t=1877270
Hello everyone,
I'm helping a far less android savvy friend with his bricked AT&t G3. He has never rooted or installed anything custom but he has an unexplained bootloop. I know my HTC One inside and out but this is the first LG3 I've ever worked on. Essentially, I'm trying to save his data if at all possible but it's seeming less and less likely as I read more about how the recovery and download mode work on this phone.
It seems like the only way I can get TWRP or any custom recovery onto this phone is if I can get it to boot, so any hope of using adb commands might be ruled out at this point. My question is: Is there any way to get a custom recovery onto this phone through download mode? If not, it seems that a full re-flash to stock might be my only option.
Thanks in advance.
The_mamba said:
Hello everyone,
I'm helping a far less android savvy friend with his bricked AT&t G3. He has never rooted or installed anything custom but he has an unexplained bootloop. I know my HTC One inside and out but this is the first LG3 I've ever worked on. Essentially, I'm trying to save his data if at all possible but it's seeming less and less likely as I read more about how the recovery and download mode work on this phone.
It seems like the only way I can get TWRP or any custom recovery onto this phone is if I can get it to boot, so any hope of using adb commands might be ruled out at this point. My question is: Is there any way to get a custom recovery onto this phone through download mode? If not, it seems that a full re-flash to stock might be my only option.
Thanks in advance.
Click to expand...
Click to collapse
If it's "bricked" brick cannot be brought back brick means it's dead. But if you have download mode it's not fully bricked. But no download mode mainly meant for official use and official firmwares only. Only really suggestion is to use the tot method to fix the phone. But it will indeed wipe everything.
Sent from my iPhone using Tapatalk
hyelton said:
If it's "bricked" brick cannot be brought back brick means it's dead. But if you have download mode it's not fully bricked. But no download mode mainly meant for official use and official firmwares only. Only really suggestion is to use the tot method to fix the phone. But it will indeed wipe everything.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I guess I should have specified that it's soft bricked, not hard bricked. Thanks for the help though, that seems to corroborate most of what I've read. I'll be flashing new firmware, was just hoping to save the data if I could but I knew it was unlikely.
Thanks again.
The_mamba said:
I guess I should have specified that it's soft bricked, not hard bricked. Thanks for the help though, that seems to corroborate most of what I've read. I'll be flashing new firmware, was just hoping to save the data if I could but I knew it was unlikely.
Thanks again.
Click to expand...
Click to collapse
Especially if it's soft brick sadly there's no way of pulling files off the phone.
Sent from my iPhone using Tapatalk
hyelton said:
Especially if it's soft brick sadly there's no way of pulling files off the phone.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Quick question again if you don't mind, and first let me say thanks a lot for the detailed thread about the tot method:
When I'm in device manager under ports I don't see LGE Modem, I just have LGE Mobile USB Port. LGE modem is actually under "modems". Which one should I change the port settings on?
Thanks again man
The_mamba said:
Quick question again if you don't mind, and first let me say thanks a lot for the detailed thread about the tot method:
When I'm in device manager under ports I don't see LGE Modem, I just have LGE Mobile USB Port. LGE modem is actually under "modems". Which one should I change the port settings on?
Thanks again man
Click to expand...
Click to collapse
As long as it's under commutation ports it's fine. It can differ sometimes.
Sent from my iPhone using Tapatalk
hyelton said:
As long as it's under commutation ports it's fine. It can differ sometimes.
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
So I want to modify "LGE Mobile USB Serial Port" right? Since that's the one under Com ports? "LGE Mobile USB Modem" is listed higher up under "modems", not under com ports.