Hello all,
!st time poster here. Hopefully I'm in the right place.
I have a rogers Galaxy s2 lte that came to me rooted. I flashed it back to stock using the steps here: http://forum.xda-developers.com/showthread.php?t=1342348
It all worked extremely well, phone boots and runs great, has all the rogers bloatware on it.
Only problem is, when I plug into Kies it tells me "Your device does not support software upgrading via Kies"
Current firmware version shows: I727RUXKJ7/I727RRWCKJ7/I727RUXKJ7/I727RUXKJ7 (ATT)
Any suggestions would be appreciated, thanks
Hey and ya your in the right place. You make sure you downloaded the i727R file not the i727. And also make sure you have the drivers installed on your computer for the phone
Use the sammobile tar and it will fix that. The i727r one
Related
Good Morning,
After flashing the Gingerbread Baseband I no longer am able to register on the network for my provider.
The device is from Rogers but unlocked and being used on the Bell network.
After flashing I realized there may be a different baseband for me to use in Canada (just North of Toronto).
I require some help in locating a Gingerbread baseband that would work or provide me with instructions on how to return to the original baseband.
Any help is appreciated!
Thank you kindly,
- Audi2Audi
Did you set the APN manually? You have to do that.
Hello!
APN in Menu|Settings|Wireless & Networks|Mobile Networks|Access Point Names ?
I have set that to: pda.bell.ca
Is there other steps required though?
Thank you for the response!
apn settings is for internet. phone must tower of sim. may be flashing baseband again will soveit because i am tower getting for my country
If you're wanting to go back to stock froyo first you need to visit here to get your original rom... these will also flash the baseband back too
http://forum.xda-developers.com/showthread.php?t=1246678
or here http://forum.xda-developers.com/showthread.php?t=1155874
then you will need to follow this turtorial in order to flash the stock rom back on (go down to second post that one is in English )
http://forum.xda-developers.com/showthread.php?t=1244490
Although it is a possibility that the BB hasn't flashed correctly, might be worth trying it again... might also be worth trying a froyo rom to see if you get a signal then, because if you do you still have the froyo baseband on...
Simplier to flash stock baseband using kdz tutorial in my signature.
Edit:
But i'm not sure if rogers has the same firmware
adixtra said:
Simplier to flash stock baseband using kdz tutorial in my signature.
Edit:
But i'm not sure if rogers has the same firmware
Click to expand...
Click to collapse
Thanks adixtra i always forget about the tutorial of yours
You can flash a .Bin File for Your P920 or P920H.
Ok, now this is getting bizarre hah.
I reflashed the baseband again and everything went normal as it did before.
This time I searched for networks and selected my provider. After about 5 minutes of the device trying to register on the network an error was received that said it was unable to register on this network.
However, when I got to my home screen I was registered on the network. I tested a voice call and it worked. I have tested data as well.
BUT! This is where it gets even more bizarre...The device cycles from 4 signal bars to 2 signal bars to none to 3G (from H) followed by not being registered on the network. Then a few minutes later (sometimes only after a reboot) it returns to 4 bars and begins the cycle again.
Has anyone seen anything like this before?
Thank you again for your help!
Questions or Problems Should Not Be Posted in the Development Forum
Please Post in the Correct Forums and Read THIS
Moving to General
Yes i have seen this with my install of the baseband file but it will not let me register the 3g or 3g+ let keeps me on full with gsm only its why i flashed mine back using the lg update tool software i put it right back to stock using similar way you flashed the baseband file. PS im on rogers as well
teray0n said:
Yes i have seen this with my install of the baseband file but it will not let me register the 3g or 3g+ let keeps me on full with gsm only its why i flashed mine back using the lg update tool software i put it right back to stock using similar way you flashed the baseband file. PS im on rogers as well
Click to expand...
Click to collapse
Good Evening,
Would you be able to upload the KDZ file from your update?
I am having problems with the LG Phone Recovery indicating that I have the most up to date software and halting the recovery process.
Thank you!
- Audi2Audi
Hello,
I flashed an earlier KDZ which allowed me to use the LG Update tool to restore my stock rom.
Thank you everyone for your help and advice.
- Audi2Audi.
it will tell you that but if you use recovery mode and it will download the file then you will have to unplug the phone from usb hold vol+ power then plug it back into the usb and it should download. like i said i used similiar method to flashing baseband
On my windows 7 not detect omap 4 and i can't flash baseband,what can i do?
Hello, i want to update my Samsung Galaxy S Plus from 2.3.5 (xxkpf) to 2.3.6 (xxkq7) but it says its for DTB (another carrier)? i have a Norwegian phone (unlocked) but is it dangerous to update, will it destroy my phone or something?
Or can i just go ahead and download. And how du i update with Odin?
-Thanks guys.
As long as you have and know how to use odin/heimdall you should be fine. I was experimenting a while back when I had my Verizon Fascinate on Sprint and I flashed the Sprint Samsung epic modem. It completely borked the entire radio, however I was able to re-flash the original modem and it was fine. Read up on the recovery options for your phone first and check the specific forum for your phone. Also in the future please ask device specific question in the proper forum.'
http://forum.xda-developers.com/forumdisplay.php?f=656
Your section is here.
http://forum.xda-developers.com/showthread.php?t=2415587
http://forum.xda-developers.com/showthread.php?t=2530610
I used those 2 threads trying unlock my L720, I followed everything up and It went smoothly It worked with (Simple mobile & Straight talk att sim card) but I was not getting a constant service, decided to go back to sprint and then, just trying to go back to stock firmware!
I am getting "Firmware upgrade encountered an issue.." in Odin every time that I try MDC, MK2 Stock firmwares says "FAIL! (Auth)" ?????
The only tar that is working is MDC modem tar found on the 1st thread used to downgrade modem to MDC, even though I was in NG2 which is the latest i was stock and rooted!
Then the phone boot up there's no sound no WiFi touch problems or is it the phone is really slow!?. I did a factory reset and nothing!
Another thing, but I noticed this since unlocked it! there is a picture too! Baseban and build are different!
Please any help would be appreciatte it!1 Thank you!
I recently received a T-Mobile Galaxy S6, and it was rooted and had a custom kernel, which was a complete mess (the person who owned the phone previously clearly did not know what they were doing) so I just wanted to restore it back to full stock.
I am decently experienced with ODIN, rooting, custom firmware etc, but I have just done one of the biggest rookie mistakes I have ever done. I had accidentally downloaded the most recent firmware for my G920T, not realizing that the file was not for T-Mobile. It was the (XAR) carrier (I believe that is C-Spire but i could be wrong) and the latest was PK1.
It flashed perfectly and all seemed fine until I decided to unlock the device. The T-Mobile S6 requires the use of the "Device Unlock" app and since I had flashed the wrong ROM, the phone thinks the Device Unlock app is not compatible. When I put a different GSM SIM card in the phone, it prompts me to use the Device Unlock app.
I do not have a previous NANDROID backup from the original T-Mobile ROM, and now that I am on the lastest Bootloader for XAR, it will not let me downgrade. I have tried flashing pretty much every MM bootloader and TWRP for both T-Mobile and XAR and none will work (except for what is currently on the device of course) I always get the error "Device: 5 Binary: 4" (sometimes the binary is 3, depending on which version of MM rom or BL I try)
To sum it all up, I am on PK1 (latest for XAR) and I need a way to get back to the official T-Mobile ROM (latest is PD1). Is there a magic method to get this figured out or am I pretty much stuck with what I got until T-Mobile releases an update that is PK1 or higher?
Thank you in advance to all of you that take your time to help (and I am sincerely sorry if I am posting in the wrong section)
greetings,
I recently inherently a Samsung Note Edge (SCL24). The phone is showing its age. It is on its default rom (4.4.4) but many things aren't work. For example, it is extremely slow; it won't remember wifi passwords, etc. I am hoping that by flashing a new rom I may bring it back to life.
The spec is listed below:
SCL24
Adroid 4.4.4
Baseband: SCL24KDU1ANJ3
as I am browsing through this forum, I am a bit confused as to the flashing procedure. Assuming it is the same as every other phones I have flashed, I suppose I would need to root it, install a recovery, possibly a new basebank, and then a new rom.
Is there a guide as to how to do this for this particular phone? It has been a while
any help, and suggestion as to which rom to flash, would be very much appreciated.
ps. I am not looking for anything fancy, but in the past I've always used slim rom.
regards,
mikec_ca2 said:
greetings,
I recently inherently a Samsung Note Edge (SCL24). The phone is showing its age. It is on its default rom (4.4.4) but many things aren't work. For example, it is extremely slow; it won't remember wifi passwords, etc. I am hoping that by flashing a new rom I may bring it back to life.
The spec is listed below:
SCL24
Adroid 4.4.4
Baseband: SCL24KDU1ANJ3
as I am browsing through this forum, I am a bit confused as to the flashing procedure. Assuming it is the same as every other phones I have flashed, I suppose I would need to root it, install a recovery, possibly a new basebank, and then a new rom.
Is there a guide as to how to do this for this particular phone? It has been a while
any help, and suggestion as to which rom to flash, would be very much appreciated.
ps. I am not looking for anything fancy, but in the past I've always used slim rom.
regards,
Click to expand...
Click to collapse
Try a factory reset first.
done that many times
This phone was purchased in Hong Kong and other than the model number "SCL24" I couldn't find any other information. Judging from this forum, looks like there are many variations on this phone (vendors in North America, Japan, and others common in south asia). Also from this forum I realized that I probably need to update the baseband in order to flash any new ROMS (post kitkat).
Hence I seek your help,
regards,
The Radius Kid said:
Try a factory reset first.
Click to expand...
Click to collapse
mikec_ca2 said:
done that many times
This phone was purchased in Hong Kong and other than the model number "SCL24" I couldn't find any other information. Judging from this forum, looks like there are many variations on this phone (vendors in North America, Japan, and others common in south asia). Also from this forum I realized that I probably need to update the baseband in order to flash any new ROMS (post kitkat).
Hence I seek your help,
regards,
Click to expand...
Click to collapse
Interesting.
Is this an international phone?
I tried asking about custom ROMS for my phone (don't want brick it) and didn't receive any responses.
I did do a Google search and didn't find much of anything.
I did download Marshmallow from Sammobile and have been gutting pretty heavily.
I guess after this much time, interest is fading.
problem solved, for now
As I mentioned earlier, this phone was purchased in Hong Kong and the model number was listed as SCL24. Following the thread on Project_ECSTASY (https://forum.xda-developers.com/no...rojectecstasy-custom-rom-galaxy-note-t3545658), I managed to flash the "Global edition stock rom without any bloatware from carrier au" using odin. The step I followed was:
1) installed samsung USB drivers for the phone (directly from samsung website),
2) downloaded and executed Odin,
3) rebooted the phone into Odin mode (vol down, home, and power),
4) connected the phone to computer via USB,
5) updated the rom through Odin.
6) once the phone rebooted, factory reset
I have not had much opportunity to play with the phone but it seemed to be working thus far. I have not had a chance to put a SIM card into it so I don't know if the new rom/Odin also flashed a new baseband and if the radio works.
will report back tonight,
mikec_ca2 said:
problem solved, for now
As I mentioned earlier, this phone was purchased in Hong Kong and the model number was listed as SCL24. Following the thread on Project_ECSTASY (https://forum.xda-developers.com/no...jectecstasy-custom-rom-galaxy-note-t3545658), I managed to flash the "Global edition stock rom without any bloatware from carrier au" using odin. The step I followed was:
1) installed samsung USB drivers for the phone (directly from samsung website),
2) downloaded and executed Odin,
3) rebooted the phone into Odin mode (vol down, home, and power),
4) connected the phone to computer via USB,
5) updated the rom through Odin.
6) once the phone rebooted, factory reset
I have not had much opportunity to play with the phone but it seemed to be working thus far. I have not had a chance to put a SIM card into it so I don't know if the new rom/Odin also flashed a new baseband and if the radio works.
will report back tonight,
Click to expand...
Click to collapse
Cool.