This thread is no longer active. Jomeister plans to continue work on Evervolv. He will open a new thread for that purpose.
Introduction
The purpose of this thread is to coordinate work on the AOSP-based Evervolv 2.2 ROM for Skyrocket (and its sister, T989).
Skyrocket is not an officially supported ROM by Evervolv, but we have fully integrated device and vendor directories in their tree. Therefore we get fixes from the main tree and also have the ability to push fixes to Evervolv's tree. This is something we could never do when we worked directly off the Code Aurora source.
Our desire is to give the dev community a single codebase to coalesce around. Hopefully, with more devs working on the same project, we can progress faster towards AOSP.
To build, follow the instructions here (choose ev_skyrocket-eng at the lunch menu):
https://github.com/Evervolv/android
Or, the short, short version:
Run "repo status" and make sure you have no local mods.
Run "repo sync" and make sure it completes without error.
Run "rm -rf out" to remove any old compiled stuff
Run ". build/envsetup.sh" to set up your environment
Run "lunch ev_skyrocket-eng" to select the target
Run "make -j4 otapackage" (adjust -j option to match your # of processors)
What works:
2D/3D graphics, hw accel of gui, bluetooth, gps, nfc, wifi, sdcard (int+ext), MTP/PTP over USB
What doesn't work:
audio, calls, camera, cell data, sms, anything else you can think of
Issues are being managed on Github:
https://github.com/Evervolv/android_device_samsung_skyrocket/issues
Want a ROM link?
Then follow the instructions to build a ROM! The point, at this time, is to get devs involved in the process. The ROM is not ready for anyone to try out or use at this point. There are many problems left to solve.
Want to help?
Are you a dev with a Skyrocket and a burning desire to get AOSP for your phone? Please, check out Evervolv and start debugging! The Github Issues link above is a great starting point.
Jomeister and RaverX3X graciously agreed to join forces here. We hope other devs join too!
Current Dev Contributors:
jomeister15
RaverX3X
topprospect
Credit and Thanks:
Xboarder56 for the original Evervolv Skyrocket device tree
romracer for the unsecure mods to the ICS kernel
Changes Log:
04/11/12: Posted succint build instructions
04/11/12: Fixed unstable-ness of GUI (link)
04/06/12: Build now boots on its own boot.img (link)
this is on 4.0.4 now?
Sent from my GT-P7510 using XDA Premium HD app
BaconStep said:
this is on 4.0.4 now?
Sent from my GT-P7510 using XDA Premium HD app
Click to expand...
Click to collapse
yes because google has released 4.0.4 sources and ota updates to nexus.
wali01x said:
yes because google has released 4.0.4 sources and ota updates to nexus.
Click to expand...
Click to collapse
Sweet!
Sent from my GT-P7510 using XDA Premium HD app
Looks great, will try building/debugging when I get my Ubuntu box up again!
Sent from my SAMSUNG-SGH-I727 using XDA
I'll be helping out as well, just got me a T989. I was working on cm9, but I'll switch to this. Hope I can help.
This is obviously a stupid question, and probably not the place to be asking it, but it is going to be asked anyway so.. I understand what the device tree is, but why is it not possible to pull one from the existing ICS leak?
giant420 said:
This is obviously a stupid question, and probably not the place to be asking it, but it is going to be asked anyway so.. I understand what the device tree is, but why is it not possible to pull one from the existing ICS leak?
Click to expand...
Click to collapse
No stupid questions here. A fully compiled ROM like the ICS leak obscures a lot of the details about how to build the ROM from scratch. You have to reverse engineer a lot of what Samsung did to compile AOSP, plus how to avoid pulling in too much Samsung bloat code. Hope that helps.
more or less were going to keep as much samsung out of it as we possibly can . Yes u can kang in stuff from the leak but then that actually causes more issues in the long run then doing it right the first time ;P.
bsbachert said:
I'll be helping out as well, just got me a T989. I was working on cm9, but I'll switch to this. Hope I can help.
Click to expand...
Click to collapse
I think we as a community should still continue working on things such as CM9 and AOKP in addition to Evervolv, just to give people as many options as possible. The good thing that Evervolv device trees are very similar to those required by CM9 and AOKP, so with a few hacks here and there I'm sure we can get those building as well. I don't know about the other devs, but I definitely have enough time to collaborate on multiple projects, as long as I'm not the sole carrier.
ur killing me. I finally managed to get media server to stay up for msm8660 audio pulled from the leak with jos isotope a4 with some other libs and bins. acdb pulling audio policy was still a problem though.
This is definitely for the better though. I was uncomfortable with all those Samsung libs bins and blobs, especially after staring at them under IDA. like raver said it woulda been a nightmare later on.
This is great though, everyone on the same pile should make this go a lot faster.
im very excited for this.
What's IDA?
Sent from my SGH-T989 using XDA
Wow. This build is going to b epic! Can't wait guys. Nice work so far
LawStud3nt said:
What's IDA?
Click to expand...
Click to collapse
http://en.m.wikipedia.org/wiki/Interactive_Disassembler
crazy what u can find in those blobs. helps a lot for debugging though
all I know is I love evervolv on my nexus one its super baller... Thanks to all 3 of you guys
Sent from my SAMSUNG-SGH-I727 using xda premium
Any updates? Got ants in my pants waiting for this one!
softballjunkee13 said:
Any updates? Got ants in my pants waiting for this one!
Click to expand...
Click to collapse
Thanks for the interest.
We will post updates as they happen. Right now we are just trying to organize and get everyone on the same page.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
topprospect said:
Thanks for the interest.
We will post updates as they happen. Right now we are just trying to organize and get everyone on the same page.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Click to expand...
Click to collapse
OK...enjoy the holiday as well!
Related
I have finally, successfully, gotten jt1134's device tree and Froyo framework all configured for the Mesmerize. This is a Vanilla Froyo (no Cyanogenmod) build and works enough to play around with (= But, I should warn you, this isn't a terribly stable build, so don't freak out if something acts weird d= Also, I'm not responsible for any harm you may do to your devices..
It's late and I have an 8:00 am tomorrow so I haven't tested everything out yet, but what is working and not working should be similar to what jt1134 has listed over in his Fascinate thread. Here's what I've tried though:
Working:
Phone
SMS
GPS
WiFi
Not Working:
Data?
Bluetooth
Camera
sdcard?
Oh, and it may randomly 'boot loop' a few times.. don't freak out though.
For this to work you need to be using the Mesmerize Froyo kernel I recently posted. To get everything setup just download the ROM and the Kernel and put them on your sdcard. Boot into recovery and make a backup. Wipe your data and cache partition. Flash the ROM. Flash the Kernel. Reboot. Froyo! If you're going to try to adopt this ROM for everyday use (good luck), make sure you grab the GApps package and flash that last.
I haven't got a Mesmerize device tree on github yet, but you can find the alterations to the kernel up. Really, you should look at jt's source/github because that's where all the dirty work is done (= Also, some of his work is under ModADroid on github.
Download Links:
Mesmerize Vanilla Froyo ROM: http://dl.dropbox.com/u/464066/Mesmerize/ROMs/froyo_mesmerize_0122.zip
Mesmerize Froyo Voodoo Kernel: http://dl.dropbox.com/u/464066/Mesmerize/Kernels/0123_mesmerize_voodoo5.zip
I'll post a link to a nonvoodoo kernel when I get one compiled.
Froyo GApps: http://goo-inside.me/google-apps/gapps-hdpi-20101114-signed.zip
Be careful!! This kernel is named the same as jt's Voodoo Sound 2.1 Kernel that he released yesterday. You may want to rename one of the two if you plan on using both. The ROM will bootloop or freeze at the lockscreen if you mistakenly use a 2.1 kernel (=
Source:
http://github.com/jt1134
http://github.com/dcow
Credits:
jt1134 <-- for all the SCH-I500 framework work
punk-kaos <-- for his contributions to the SCH-I500 framework
phidelt82 <-- for keeping me company late at night (not like that.. ..) and for letting me bounce ideas off of him, calling me out when I'm being stupid, and flashing whatever I throw at him (=
Enjoy!
Let me be the first! Thank you so much this should hold me over until official release comes out.. Maybe even then lol, thanks again.
Sent from my SCH-I500 using XDA App
cpfeifer said:
Let me be the first! Thank you so much this should hold me over until official release comes out.. Maybe even then lol, thanks again.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
Perhaps if we get a to a final release or beta then. I don't think you'll be wanting to employ this for everyday use until we get more issues fixed.
cpfeifer said:
Let me be the first! Thank you so much this should hold me over until official release comes out.. Maybe even then lol, thanks again.
Sent from my SCH-I500 using XDA App
Click to expand...
Click to collapse
dcow90 said:
Perhaps if we get a to a final release or beta then. I don't think you'll be wanting to employ this for everyday use until we get more issues fixed.
Click to expand...
Click to collapse
It was definitely fun to play with, but yeah, as for everyday use, there is still work to do. Hopefully soon though. I know I'll be digging in some more tonight to see if I can find anything fixes.
be glad to help test things once you get a little bit more stable with this.
Sent from my SCH-I500 using Tapatalk
phidelt82 said:
It was definitely fun to play with, but yeah, as for everyday use, there is still work to do. Hopefully soon though. I know I'll be digging in some more tonight to see if I can find anything fixes.
Click to expand...
Click to collapse
The sdcard issue is just a problem with the init.rc I think.. but we'll see whats still not working after I get jt's latest source built and we can work from there.
Sent from my USCC SCH-I500..
dcow90 said:
The sdcard issue is just a problem with the init.rc I think.. but we'll see whats still not working after I get jt's latest source built and we can work from there.
Sent from my USCC SCH-I500..
Click to expand...
Click to collapse
I think it has to do with the mounting. It looked the same as the other init.rc's that I was looking at, but it was all running together at that point last night. I'll dig into it some more tonight and look at the mounting of the base init file and see what I can come up with. Hopefully something will jump out.
Dont pull bin/vold from a prebuilt image, make sure you're building the aosp version. Also, make sure you are pulling prebuilt/vold.fstab from my device repo.
Android uses the vold daemon and fstab files to manage sdcard mounts, not a simple mount command like the ones used in init.rc for other partitions.
Sent from my SCH-I500 using XDA App
Thank you guys for all the hard work!
Looking forward to trying this out! Just to be sure- when I'm done playing I can go straight back to the exact way I have it now as long as I have a nandroid backup? No harm done?
sent from my superclean mesmerize
co6alt said:
Looking forward to trying this out! Just to be sure- when I'm done playing I can go straight back to the exact way I have it now as long as I have a nandroid backup? No harm done?
sent from my superclean mesmerize
Click to expand...
Click to collapse
No, you also need to revert to a 2.1 kernel as well. I mean 2.1 will boot on this kernel, but I can't say that it will work perfectly, and I found my scdard still didn't after a restore until I reverted kernels.
So restoring doesn't change the kernels, just the rom?
sent from my superclean mesmerize
co6alt said:
So restoring doesn't change the kernels, just the rom?
sent from my superclean mesmerize
Click to expand...
Click to collapse
What you should do is download jt1134's Mesmerize Voodoo5 w/ Voodoo Sound kernel and flash it. You should then take a backup in perfect working order. If you want to play with 2.2, wipe, flash the rom, then kernel. When you're done, wipe, restore the backup, then flash the previous kernel.
Gotcha. Ha, I just found out about voodoo sound. That'll be tonights project, then 2.2 tomorrow hate this edge network junk
sent from my superclean mesmerize
co6alt said:
Gotcha. Ha, I just found out about voodoo sound. That'll be tonights project, then 2.2 tomorrow hate this edge network junk
sent from my superclean mesmerize
Click to expand...
Click to collapse
EDGE? AT&T.. What?
I've got the source downloading for jt's latest build so hopefully we'll have some improvements soon. (=
dcow90 said:
EDGE? AT&T.. What?
I've got the source downloading for jt's latest build so hopefully we'll have some improvements soon. (=
Click to expand...
Click to collapse
Sweet waiting for a few more things to be functioning before I try using it. Thought maybe about trying to tomorrow but only as a test.
Edit: I just flashes the ROM and Kernel last night 0 problems booting and starting up phone was basically functioning then when I installed the Froyo Gapps I couldn't use the phone anymore because no data connection couldn't get passed the google account setup but seemed to work.
The only thing that was weird is before I installed the gapps zip while playing around the phone kept going back to the silver Android logo seeming as if it was restarting and going back to the lock screen but I managed to test the Phone, called 611 got US Cellular so that works!
Thanks again for your work I definitely and looking forward to this.
Big thanks to the devs! This is an awesome step forward. I flashed the ROM and Kernel, and although it's definitely alpha, it's awesome progress!
<rant>
It's pitiful that team of hobbyists and enthusiasts, working for free, in their spare time can port 2.2 faster than Samsung, who employs a full staff of software and hardware engineers, armed with development tools and source code. SAMSUNG, YOU SHOULD BE ASHAMED.
</rant>
Yoder808 said:
Big thanks to the devs! This is an awesome step forward. I flashed the ROM and Kernel, and although it's definitely alpha, it's awesome progress!
<rant>
It's pitiful that team of hobbyists and enthusiasts, working for free, in their spare time can port 2.2 faster than Samsung, who employs a full staff of software and hardware engineers, armed with development tools and source code. SAMSUNG, YOU SHOULD BE ASHAMED.
</rant>
Click to expand...
Click to collapse
From what I've read, it isn't a question of capability, i'ts just politics.
Thankfully we have wonderful developers to take the crap manufacturers throw at us and turn it into what really should be!
bdemartino said:
From what I've read, it isn't a question of capability, i'ts just politics.
Thankfully we have wonderful developers to take the crap manufacturers throw at us and turn it into what really should be!
Click to expand...
Click to collapse
Oh I agree 100%. They COULD have rolled out 2.2 months ago, if they wanted to.
Yoder808 said:
Oh I agree 100%. They COULD have rolled out 2.2 months ago, if they wanted to.
Click to expand...
Click to collapse
Samsung could have rolled out an firmware update but from what I've read they leave it up to the carriers to decide when they roll out updates.. especially OTAs since its on their end. US Cellular does spend a large amount of time testing their phones before releasing anything because their still small business orientated. That said, they easily could have rolled something out for us much earlier than this, as far as the small business goes they could have released it un-supported to commercial users and told business' not to load it yet plus not shipped any phones with it.. at least we'd have the option then..
NOTE: THIS ROM IS NOT CURRENTLY USABLE! DO NOT FLASH IF YOU DO NOT KNOW WHAT YOU ARE DOING
Ladies and gentlemen of XDA, I present to you ICS on the TF101! This ROM is currently very much still in development, and is not usable in it's current state, but it boots! This is more or less a proof of concept at the moment.
What's not working:
Display has a green overlay most of the time
Touchscreen
Wifi
Camera
HW Acceleration
Pretty much everything else
What does work:
adb
Boots to launcher
Touchpad on the dock (currently only method of input)
To install:
Download the system blob from http://mirror.mostoftheinternet.com/android/ROM/tf101/system-AOSP-20111230.blob.bz2
Boot into recovery
Do factory reset
Mount /sdcard using the menu
Use adb to transfer the blob to the device
Code:
adb push system-AOSP-20111230.blob.bz2 /sdcard/blob.bz2
Enter device shell
Code:
adb shell
Decompress blob and apply
Code:
bzcat /sdcard/blob.bz2 | dd of=/dev/block/mmcblk0p4
Reboot and wait for it to install
Done!
If you are able to contribute at all, please let me know. The Git repo for this is at https://github.com/Deathisfatal/android_device_asus_tf101/tree/cm9.
Dev notes:
Most of the random crashes (and the green colour) seem to be caused by an issue with the graphics
Eventually, I plan to move to CM9 once they move closer to release
Screenshot! (yay, green...)
http://mirror.mostoftheinternet.com/images/ics.png
this
is
sex
Congrats
Sent from my MyTouch_4G_Slide using xda premium
Are you going to setup a repository for this? I was actually planning on starting a port of my own but I would love the opportunity to jump in and work with you.
Already have, forgot to add it to the post
Thanks for the support, guys.
Nice to finally see even an early build as this, well done i`ll be keeping an eye on this thread
Deathisfatal said:
Eventually, I plan to move to CM9 once they move closer to release
Click to expand...
Click to collapse
This would make my day! If we manage to get CM9 to start working, I would love to help try or try to be the main man behind porting MIUI (English Site). I've helped a decent bit with porting it to my phone (Samsung Epic 4G). From everything i've seen so far the kernels of CM7 and MIUI are pretty much interchangeable, so it should be a fairly easy transition if CM9 functions. I don't know squat about kernels, so i wouldn't be of any help there though.
UH i had this like 3 weeks ago, but didn't post cuz it sucked so much.
Here's mine, no green stuff either.
I also didn't post it because it's a straight up kang of the Iconia guys' but whatever.
LOL
Thanks to OP for your hard work...
www.scienceprousa.com/jcarrz1/icstest.zip just flash in clockwork but don't expect much...........
Mind sharing your vendor files, jcarrz1?
Deathisfatal said:
Mind sharing your vendor files, jcarrz1?
Click to expand...
Click to collapse
Nope cause it's a straight-up kang of the iconia guys'. And they took their source down because n00bs b crazy.
I really admire that you actually have a device tree and stuff, I'm too inexperienced to do that.
Nice!
jcarrz1
Maybe this may help? https://github.com/CyanogenMod/android_device_asus_tf101
Was going to start an ICS port today as well so I'll be forking your branch and hopefully helping out. Glad we are going to get some progress on this!
arayray said:
Maybe this may help? https://github.com/CyanogenMod/android_device_asus_tf101
Click to expand...
Click to collapse
My original code is a fork of that. Their repo is pretty incomplete.
Was going to start an ICS port today as well so I'll be forking your branch and hopefully helping out. Glad we are going to get some progress on this!
Click to expand...
Click to collapse
Excellent!
Deathisfatal said:
My original code is a fork of that. Their repo is pretty incomplete.
Click to expand...
Click to collapse
Yeah its pretty outdated... Lets get a community effort here..
Good to see a start on this, a bit later than expected!
Sent from my Transformer TF101 using xda premium
For the graphics drivers, as the tf101 uses the same SOC as the xoom, it might be possible to pull the tegra2 drivers from google's wingray aosp sources (found here)
First of all for your work
You know what i dont get is this
http://phandroid.com/2011/11/27/asus-transformer-not-prime-gets-early-ics-port/
where is bumbledroids work?(this was november still)
i am a total retard when it comest od developing but if you ever need any beta tester i have loads of experience on rooting/romming devices an am in possesion of a SBK1 asus transformer with keyboard.
looking forward to giving it a go
Sent from my Lumia 800 using XDA Windows Phone 7 App
Are you compiling against AOSP or CM9?
telsk said:
First of all for your work
You know what i dont get is this
http://phandroid.com/2011/11/27/asus-transformer-not-prime-gets-early-ics-port/
where is bumbledroids work?(this was november still)
i am a total retard when it comest od developing but if you ever need any beta tester i have loads of experience on rooting/romming devices an am in possesion of a SBK1 asus transformer with keyboard.
Click to expand...
Click to collapse
Right, and if the cyanogenMod device tree for tf101 is by bumbledroid then why doesn't touch work yet?
jcarrz1
See page 19 for the seventh build.
Good job! Nice and clean in a new topic. KUTGW!
Sent from my HTC Desire using XDA App
Freaging sweet!
(sorry for spam but this is exciting)
Excellent stuff.
So will that mean close to full HWA?
If we're running any of the ICS builds which have the hardware hacks, this applies, right?
texasice said:
@ those who flashed Chaosz-X new kernel you need to remove this line from build.prop
Code:
ro.config.disable_hw_accel=true
Click to expand...
Click to collapse
@rootSU: I think it does, because it scores almost the same as GB Sense ROMs, and it gets pretty decent FPS at Quadrant (certainly smooth enough), so I think it works fine.
@pnw: haven't tested that, but you can give it a try, it seems pretty logical that it would help
Can't wait for the 3.0 kernel
Sent from my HTC Desire using XDA App
I flashed this on the p2 build, but my wifi would not turn on... I reverted back to my nandroid right before the flash...
sent from my HTC desire using xda premium
mattmanwrx said:
I flashed this on the p2 build, but my wifi would not turn on... I reverted back to my nandroid right before the flash...
sent from my HTC desire using xda premium
Click to expand...
Click to collapse
chaoz tried including the wifi module you use in the kernel in the system/lib folder? can't find it there on the newest kernel. This messed things up for tristan earlier
Oh crap, forgot to supply the bcr4329.ko indeed.
I'm going to try to get a running 3.0 by tonight, if I don't have it finished this evening, I'll upload the WiFi module from the build (using 2 different OS's to work on, Linux for compiling, and Windows for everything else, and working in Win is much easier for me ;p)
Edit: beginning with the really lame methods of getting 3.0 to run, first attempt is done I think, just copied over files, and modified some of them, nothing really special, starting compiling in 5 minutes.
I flashed over p2 with the camera fix and the camera no longer works. Should I reapply the camera fix?
*child said:
I flashed over p2 with the camera fix and the camera no longer works. Should I reapply the camera fix?
Click to expand...
Click to collapse
But does your wifi work? It didn't work for me...
Not too sure about the camera... it should work... as the added is just libs... the kernel does look at the libs, but doubt it would make a difference... just my guess...
sent from my HTC desire using xda premium
Wifi did not for me. Camera worked but I didn't test it extensively.
Sent from HTC Desire
Camera and wifi doesnt work But HW ac. is fine more speed
Wi-Fi also does not work
Chaosz-X first of all, thanks for the work you've done so far. I believe i can port it over to the n1 using the zip you uploaded. Second, please learn git so you can push your changes to github. (i know you said you hate git but, youre developing a kernel; in comparison git is way easier to understand) It will be much easier for other devs to follow your progress, and port your changes to other qsd8k devices badly in need of hwa.
texasice said:
Chaosz-X first of all, thanks for the work you've done so far. I believe i can port it over to the n1 using the zip you uploaded. Second, please learn git so you can push your changes to github. (i know you said you hate git but, youre developing a kernel; in comparison git is way easier to understand) It will be much easier for other devs to follow your progress, and port your changes to other qsd8k devices badly in need of hwa.
Click to expand...
Click to collapse
cant wait 3.0 kernel for n1
texasice said:
Chaosz-X first of all, thanks for the work you've done so far. I believe i can port it over to the n1 using the zip you uploaded. Second, please learn git so you can push your changes to github. (i know you said you hate git but, youre developing a kernel; in comparison git is way easier to understand) It will be much easier for other devs to follow your progress, and port your changes to other qsd8k devices badly in need of hwa.
Click to expand...
Click to collapse
How could he even develop a linux kernel if he is better in using windows? Dont you have to be a kernel dev to do those things?
Some devs are crossing strange lines - 4 sure . Hope you get it done for our Nexus ONE my friend
cheers
sweet..kernel 3.0!!
waiting ..waiting..
bunnahabhain said:
How could he even develop a linux kernel if he is better in using windows? Dont you have to be a kernel dev to do those things?
Some devs are crossing strange lines - 4 sure . Hope you get it done for our Nexus ONE my friend
cheers
Click to expand...
Click to collapse
People start with windows at a young age
Sent from my HTC Desire using xda premium
Hi all! This is my first attempt at a rom, so there are definetly going to be bugs.
This rom was ported from the galaxy nexus stock rom
Ill just post the bugs im aware of, and add to the list when people post them.
Bugs:
All bugs in 7/22 cm10 build for infuse 4g
USB mounting isnt working at all
Maybe debugging too
use power control app for widget toggles
First boot will give tts error, just ignore
Flash instructions:
Must be on ICS ROM!
Wipe data/cache
Wipe davlik-cache
Install zip from sdcard
Reboot
Please post any feed back, and again this is my first rom so thanks for trying it out!
Download:
http://www.mediafire.com/?88sb0g4x6umc766
Thanks:
•Scott, Nun, Yuma, JT, Araemo, PoX, Entropy, and everyone else who helped create the cm10 rom I used to port from
•Elitemovil for the gnex rom
•iall5star for porting it to galaxy s
•mg2915 for his tutorial on how to port roms
Yesss more Jelly
slicingtaco said:
Yesss more Jelly
Click to expand...
Click to collapse
Thanks another JB rom..congrats bro..
slicingtaco said:
Yesss more Jelly
Click to expand...
Click to collapse
Never can have to many jelly beans lol.
I'll give it a try and see how it compares to CM10. Might b a few days tho bc I just flashed the new CM10 build and it's running pretty smooth.
Does this have "Project Butter" included?
Sent from my SGH-I997 using xda app-developers app
No it does not have project butter I'm unaware of what that is, but if you know where to point me to I can try and make a version with that included
Sent from my jelly bean infused infuse
Yummy...glad to see more JB roms popping up
Sent from my SGH-I997 using xda premium
vkumar2695 said:
Yummy...glad to see more JB roms popping up
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
You heard the man you can never have to many jelly beans. Lots and lots of treats
Sent from my SAMSUNG-SGH-I997 using xda premium
thanks Mate...i think it will be a Impressive rom...cheer！
okay quick question..... has anyone tried this yet??
if so please post your experience here
no i won try it myself... i have too much customization made to just flash another rom for now
supernewbdev said:
No it does not have project butter I'm unaware of what that is, but if you know where to point me to I can try and make a version with that included
Sent from my jelly bean infused infuse
Click to expand...
Click to collapse
If you just Google "Project Butter", you'll find a ton of links about it. They will prob do a better job explaining than I will but I can try.
From what I understand, project butter was one of the major changes Google made from ics to jb. It is meant to make the phone quicker and more responsive by making some tweaks to GPU rendering I think and some other things. The team that released Cm10 for the infuse tried to include the code but it caused stability issues on our phone. It did make the phone seem "snappier" but it would randomly freeze so they had to remove the code.
I'm sure there is a lot better information to b found on the web.
Sent from my SGH-I997 using xda app-developers app
raghul said:
okay quick question..... has anyone tried this yet??
if so please post your experience here
no i won try it myself... i have too much customization made to just flash another rom for now
Click to expand...
Click to collapse
I just tried to flash it a couple times but couldn't get past the Samsung Logo. I tried once straight from CM10 and then once after first flashing an ics rom to get blue ics recovery.
Could just b user error but I used the same method as I always do. Full wipes then install. Maybe it was a bad download. I didn't do a MD5 check.
Sent from my SGH-I997 using xda app-developers app
benbos_06 said:
I just tried to flash it a couple times but couldn't get past the Samsung Logo. I tried once straight from CM10 and then once after first flashing an ics rom to get blue ics recovery.
Could just b user error but I used the same method as I always do. Full wipes then install. Maybe it was a bad download. I didn't do a MD5 check.
Sent from my SGH-I997 using xda app-developers app
Click to expand...
Click to collapse
You're right, I had posted the wrong file for download. Please use the updated link!
Sent from my jelly bean infused infuse
supernewbdev said:
You're right, I had posted the wrong file for download. Please use the updated link!
Sent from my jelly bean infused infuse
Click to expand...
Click to collapse
LMFAO:silly:
Just food for thought... CM10 is still in the early development stages.. Its probably a bad idea to start "porting" other ROMs since the actual files that are MEANT for our phone are still being worked on. For project butter, it involves updating the PVR drivers. JT had ported the code over from the crespo kernel to update the PVR drivers, but something seemed to conflict with it as it had random freeze ups. The reason this hasnt been fixed yet, is it is a HUGE change.. Literally hundreds of lines of kernel codes are changed/removed/added so its not a simply thing to pinpoint. Entropy is taking a look this weekend as he found some things to be a mess.
Also, you might want to give some credit in your OP... ALOT of people including myself worked incredibly hard to bring CM10 to the infuse, so its the least you could do for using it as your base.
First off, congrats on getting the port to work, but I have to agree with pretty much everything Scott said. Unfortunately what you mention trying to accomplish is going to take more than just zipping a few files over the top of an existing ROM.
As a good rule of thumb it is always advisable to get permission from the original source if you are going to use it in your build, and from the sounds of Scott's post this hasn't happened. We all like new things and all are trying to improve or phone experience, but it is important to be respectful of the time and effort of those that have come before.
Food for thought as you continue your endeavors and best of luck to you.
Sent from my SGH-I997 using Tapatalk
scott.hart.bti said:
Just food for thought... CM10 is still in the early development stages.. Its probably a bad idea to start "porting" other ROMs since the actual files that are MEANT for our phone are still being worked on. For project butter, it involves updating the PVR drivers. JT had ported the code over from the crespo kernel to update the PVR drivers, but something seemed to conflict with it as it had random freeze ups. The reason this hasnt been fixed yet, is it is a HUGE change.. Literally hundreds of lines of kernel codes are changed/removed/added so its not a simply thing to pinpoint. Entropy is taking a look this weekend as he found some things to be a mess.
Also, you might want to give some credit in your OP... ALOT of people including myself worked incredibly hard to bring CM10 to the infuse, so its the least you could do for using it as your base.
Click to expand...
Click to collapse
A perfect way to put it you two.
Yuma75 said:
First off, congrats on getting the port to work, but I have to agree with pretty much everything Scott said. Unfortunately what you mention trying to accomplish is going to take more than just zipping a few files over the top of an existing ROM.
As a good rule of thumb it is always advisable to get permission from the original source if you are going to use it in your build, and from the sounds of Scott's post this hasn't happened. We all like new things and all are trying to improve or phone experience, but it is important to be respectful of the time and effort of those that have come before.
Food for thought as you continue your endeavors and best of luck to you.
Sent from my SGH-I997 using Tapatalk
Click to expand...
Click to collapse
Sent from my SGH-I997 using xda app-developers app
scott.hart.bti said:
Just food for thought... CM10 is still in the early development stages.. Its probably a bad idea to start "porting" other ROMs since the actual files that are MEANT for our phone are still being worked on. For project butter, it involves updating the PVR drivers. JT had ported the code over from the crespo kernel to update the PVR drivers, but something seemed to conflict with it as it had random freeze ups. The reason this hasnt been fixed yet, is it is a HUGE change.. Literally hundreds of lines of kernel codes are changed/removed/added so its not a simply thing to pinpoint. Entropy is taking a look this weekend as he found some things to be a mess.
Also, you might want to give some credit in your OP... ALOT of people including myself worked incredibly hard to bring CM10 to the infuse, so its the least you could do for using it as your base.
Click to expand...
Click to collapse
I apologize, like I said this is my first port/ROM. If you could tell me who to give the proper credits to, I will put then in the OP. And thank you for the information about project butter
Sent from my jelly bean infused infuse
Yuma75 said:
First off, congrats on getting the port to work, but I have to agree with pretty much everything Scott said. Unfortunately what you mention trying to accomplish is going to take more than just zipping a few files over the top of an existing ROM.
As a good rule of thumb it is always advisable to get permission from the original source if you are going to use it in your build, and from the sounds of Scott's post this hasn't happened. We all like new things and all are trying to improve or phone experience, but it is important to be respectful of the time and effort of those that have come before.
Food for thought as you continue your endeavors and best of luck to you.
Sent from my SGH-I997 using Tapatalk
Click to expand...
Click to collapse
Yes I know that now, I didn't really know that I should get permission for the cm10 too but I did get it for the ROM I ported. Who else worked on the cm10 ROM with you and Scott?
Sent from my jelly bean infused infuse
supernewbdev said:
I apologize, like I said this is my first port/ROM. If you could tell me who to give the proper credits to, I will put then in the OP. And thank you for the information about project butter
Sent from my jelly bean infused infuse
Click to expand...
Click to collapse
Great Job in getting the Port on it's feet!
edit: Apologize for upsetting those that didn't understand me, or for me not being clear...
I wouldn't mind helping test out at all, send me a PM or just tell me what's up in a post on here.
-U.S Army 18x-
Thanks to the encouragement of blindndumb, I've decided to personally make a cm10 rom too. This CM10 Rom also acts as my base for my PA.
So... Yea. As Usual,
Double Thanks for cnote74 for making the kernel too for me as my computer is the most old fashion one :-/
And also 0.0 for teaching me how to port
And also blindndumb for the camera patch
And also ...Awesome... for the amazing AwesomeBeatsv3
And also hdorius for supporting me all the way till now
And also ParanoidAndroid For even making this rom possible
(YES I LOVE THE 2 WORDS AND ALSO )
Flashing Instructions ( Very Important -> You must be on cm10 )
1. Make Sure You're On The Latest CWM Or 4EXT Recovery
2. Make A Backup
3. Wipe Cache and Dalvik
4. Flash ROM ×Still requesting permission before uploading×
5. Flash Gapps ×http://goo.im/gapps/gapps-jb-20120726-signed.zip×
6. Reboot and Enjoy
When will it be released?
It will be released as soon as i get the permissions from other dev and at the same time thanking blindndumb,hdorius and cnote74 for helping me through this difficult times and making it a big success
Why create this thread if you haven't got the rom to release yet?
Sent from my Desire HD using Tapatalk 2
any new info for this rom camera work ! or camcorder work full on this rom ?
kee going great from you
mrbubba999 said:
Why create this thread if you haven't got the rom to release yet?
Sent from my Desire HD using Tapatalk 2
Click to expand...
Click to collapse
I am able to release it right now just need to get the permissions and the links would be up instant. Camera works but camcorder doesn't work for me.
Camera for non samsung sensor, for dhd with omniVision sensor?
Gradjevinac said:
Camera for non samsung sensor, for dhd with omniVision sensor?
Click to expand...
Click to collapse
Huh? o.o
simahu said:
Huh? o.o
Click to expand...
Click to collapse
Multiple sensor vendors for the Camera exist. Just because it is an HTC phone does not mean you have an HTC camera(omnivision or Samsung) You need to know this stuff man:silly:
I can understand if people want to make there own roms. And i really appreciate it if they share the work with the community. But before you do this, you should learn something about how to do this stuff!
Sent from my Desire HD using xda app-developers app
Sorry but I wont be going anywhere near anything you release and I use that term loosely. You appear to be jumping from one genuine developer's rom's to another trying to cobble up your own rom. Just reading your previous posts clearly shows your technical abilities are rather lacking.
Should maybe also add, non or unofficial CM10 rom as well to the title.
IDK
WR
Stop me if i am wrong... But if you compiled CM10 from source then why do you have to wait for permission???? What CM10 rom are you using as a base then??? Jellytime is the only one i know of to boot and run with CM10, and we all know you will not get permission from Random
Guys,
I have already requested a mod take a look at this. I find it weird that his computer cannot compile a kernel but it can compile a rom. Even on my custom built with a 6 core AMD Phenom with 16 GB of RAM it takes about an hour to an hour and a half to compile from source. That would require at least 2 days time on his machine with a melted core. We will see if this is legit. Let the mods take care of this
menditsa said:
Sorry but I wont be going anywhere near anything you release and I use that term loosely. You appear to be jumping from one genuine developer's rom's to another trying to cobble up your own rom. Just reading your previous posts clearly shows your technical abilities are rather lacking.
Click to expand...
Click to collapse
Let me take a peek at this. He thanked people for compliling the kernel and then thanked multiple other people... so he took a bunch of other peoples work and crunched them into one... something seems alittle fishy is all I say. And yes its pretty clean on my part that he doesn't seem to know what he's doing. (Don't get me wrong I'm no where near being a dev but it just seems like he's trying to make himself popular for making one) idk.That's my input so ill just see where this goes. Goodluck
Sent from my Inspire 4G using xda premium
Thread Closed.
Placeholder threads for "coming soon" ROMs are not allowed. Neither are ROMs that use other peoples work without permission.
Note to OP, I you wish to use randomblame's kernel, compile it yourself, its not that hard and there is nothing in the GPL that prevents you from doing so.