Related
Hi all
I have read in another thread that you can use MP4 files as ringtones.
I have a couple of very nifty mp3 extractions from the turkish (kiss) song. When I convert these files using "Easy CD-DA extractor" program to mp4 I am unable to play these files for ringtones.
But when I convert these pesky 65k files into wav, they end up being 2mb!!! Anyone know of a good conversion program?
These files are attached. I think this would be a pretty funky tune (although some others might consider it ...sad) haha
*****WHOOPS.. looks like the firewall at work isnt allowing these files to be uploaded
Using windows sound recorder (sndrec32.exe) you can convert the WAV file:
File->Properties->Convert Now
Change the Format to PCM
Attributes: 11.025 kHz, 8Bit, Mono is about as basic as you would want to go (poor quality, only use for small clips).
This should reduce the size down to about 100Kb or so. You can change the attributes for a better quality but keep the format as PCM. Also note that better attributes mean more memory.
cdex
is pretty good i'm not sure about the xda playing mp4 but it does play wma
also you can make it mono insted of stereo and reduce the samplerate to 11Khz this will also dec the size of your tone
and the loss of quality dont really mean all that much when it's a ring tone anyway since the speaker itself is hardly THX surround quality to begin with and of cause not stereo
thanks to everyone who responded.
Easier yet - if you can get them to wav format, then do so at high quality.
Then simply use Windows Media Encoder (free from Microsoft if not alreay on your PC), to save them as 96K .wma files.
These can be used straight away on the phone, and take up only around 400-500K for a full 40 second tone/song, in high quality 96K format!
high quality dont matter when played by the tiny mono speaker of the xda
you can use wma better and smaller than wav..
read this:
http://forum.xda-developers.com/viewtopic.php?t=6425&start=0
Rudegar, I agree with what you are saying, but only to a degree.
Because, like anything in life, whatever you put into something bad, will only but be worse when it comes out.
So using a poor quality tone, to be played through a speaker that is already poor, is just asking for trouble.
Why I suggest using a decent quality tone, is not to have a mozart like outcome. But on the contrary, simply to ensure that the poor speaker doesn't make too much of a dogs dinner of it any more than is necessary.
But I know what you are saying.
Is it possible on the XDA 2 to set an alarm that will play an MP3 audio stored on SD Card?
May be there is some kind of software that can be installed to do this? Preferably freeware :!: :?: :roll: :?
Thanks in advance.
i would think it pretty easy if you changed it to wma and set it up in sounds and notifications or what ever that entry in systems is called
Thanks for suggestion. However, the problem with converting MP3 to wav (using dbPowerAMP) causes the MP3 to grow to a huge size. 1.9MB converts to 30MB!
I imagine the same would happen if I were to convert to wma using an appropriate converter.
Any other suggestions?
cdex is a pretty good and free encoder for the pc platform
it can make wav mp3 and make wav wma and make mp3 vma and ....
when it's a not music you'll be listening to on your headset
you can limit the kb/sec to 64
wma at 64kb/sec dont take up more space then a mp3 at 64kb/sec
and sounds better
Ustad said:
Thanks for suggestion. However, the problem with converting MP3 to wav (using dbPowerAMP) causes the MP3 to grow to a huge size. 1.9MB converts to 30MB!
I imagine the same would happen if I were to convert to wma using an appropriate converter.
Any other suggestions?
Click to expand...
Click to collapse
No mate.
Other way round.
Becuase mp3 and wma are compressed audio formats (small size) whereas wav is generally not (though you can use really silly low settings, but it would sound terrible).
So going from mp3 to wav will of course make a huge file.
BUT, going from mp3 to wma will produce a SMALLER file size even than your mp3, as it's a better format (i.e. smaller file size, at same or better quality)
I use 40 second wma tones for my XDA2. But for my girlfriend's Nokia, I have to use mp3.
My files at 96K quality, are around 500K file size. Her mp3 at same quality is around 585K for the same file.
Hope that helps.
Thanks for your advice - re MP3 to wma. I understand what you're saying. I downloaded dbPoweramp which has option to convert to from MP3 to wma but whenever I try to do it, it comes up with an message saying that I require appropriate Codec. Well that doesn't help me much. What the heck is a Codec, where do I get one from and how do I set it up?
I'm sure one of you guys will know! Thanks in advance.
:roll: :!: :?:
Ustad said:
Thanks for your advice - re MP3 to wma. I understand what you're saying. I downloaded dbPoweramp which has option to convert to from MP3 to wma but whenever I try to do it, it comes up with an message saying that I require appropriate Codec. Well that doesn't help me much. What the heck is a Codec, where do I get one from and how do I set it up?
I'm sure one of you guys will know! Thanks in advance.
:roll: :!: :?:
Click to expand...
Click to collapse
The same site you downloaded dbamp from...
Codecs are 'plugins' that handle conversation of all the different file types.
That way, you only need install the codec, for the type of conversion you want to do.
Here's the link for the codecs download page:
http://www.dbpoweramp.com/codec-central.htm
The direct link for the .wma codec however, is:
http://www.dbpoweramp.com/codec-central-wma.htm
Thanks for that information. You've been a great help. You are right too. Well, mostly right. I downloaded the codec from the link you gave. I then converted MP3 to wma using the "Windows Media Audio V2" option from the Compressed option list. By default, this option gives the "Attirbutes" of 8kbps, 8kHz mono. I tried a few different attributes. Anything higher than 12kbps, 8kHz Stereo seems to convert the MP3 file to very large sizes like 26MB from a 1.9 MB MP3. Also I noticed that when done, it gives the file the extension of .wav rather than .wma. The sensibly sized file converted to around 296Kb. However, sound quality was not as good. Not too concerned about that since just want to use for alarm.
Getting there slowly.
Problem 1 - I copied the 296Kb wav file into the Windows folder of Pocket PC. Went to set alarm. The alarm list displays the converted file in the list of tunes to choose from, but when I try to choose the converted file, it automatically switches to an option named "Default". can't understand why.
Problem 2 - One converted file (mp3 to wav rather than to wma) was selectable as a tune for alarm. However, when the alram goes off, it only lasts for about 10 seconds. How did you manage to set yours to 40 seconds?
Any further advice? Am I doing something wrong?
Forget it. Use freeware Wolf Clock instead.
Ustad...
If it says .wav, it IS a .wav
That's why the file is so large.
Not sure what has happened, but you HAVEN'T created a .wma file from it.
To be fair though, I use a different tool to convert, that requires registration, so maybe you should try the other converter suggested above.
use super alert to set mp3s as alarms. works like a charm. www.pocketgear.com.
Thanks for you help guys. I've just downloaded test trial version of super alert and is look quite good so far.
Will update after I get a chance to play aroud with.
:wink:
jonlien & the rest of you - THANK YOU very much indeed. “Super Alert” seems to be working fine. Not a very user friendly interface, but the darn thing works. It plays mp3 audios at the clock alarm time. This is great news. I’ve been dying to find a functionality such as this for ages. Can’t understand why Pocket PC doesn’t allow mp3s to be playable direcly via clock alarm settings anyway.
If anyone else decides to use “Super Alert” – please bear in mind that the program doesn’t allow u to select an mp3 directly. Instead it allows u to choose a Playlist which u can define via Windows Media Player. So the thing to do is to define a song you want to use as a Playlist item and select that playlist item in “Super Alert”.
Little tip – to avoid any interference (“Clock Alarm” sound, message display, repetition etc) from the actual XDA’s “Clock Alarm”, remove all the ticks from the options in the “Clock Alarm” for the time you have set the alarm to go off. This was, only the mp3 will play at the designated time and not the XDA’s “Clock Alarm”. This may be obvious to some of you techy guys but I had to mess about to get it to work smoothly.
I’ve only had time to figure out what I’ve said above and only found this use for “Super Alert”. If anyone has found useful/clever ideas or tips, would love to hear.
Once again, thanks to you all. :wink:
Wolf Clock – Freeware – I did a quick search for this via Google. Didn’t find anything for PDA called Wold Clock. Could anyone send me a link for this please. Any comments about Wolf Clock. Is it any good? :?:
google.com
http://www.google.com/search?q=wolfclock&sourceid=opera&num=0&ie=utf-8&oe=utf-8
Wasn't so hard
Actually it's too feature full for me but it's a freeware and it works...
pTravelAlarm also looks nice. I've got sthg like this:
PTravelAlarm.v1.4
Jarekt - Many thanks. WolfClock seems like a much better idea. I couldn't find it because I was looking for "wolf clock" instead of "wolfclock".
Some great advice received from people. Thanks to all.
WOLFCLOCK - Problems!!!
It appears that most of the time the alarm mutes itself and ends up not going off, although the alarm function appears activated on the display - U can see the Alarm off and Snooze buttons at the time the alarm is set, but there is just no sound!!!!
It also switches the fone sound off so when a call comes in, it doesnt ring. And i need to turn off wolfclock at the running programs place so that the sound will come bk. It doesnt simply adjust the volume of the PDA, but somehow, mutes the entire fone.
Can anyone advise please :?: :?: :?:
PS - Super Alert seems to be working fine, but interface is crap!!
You can try mortplayer, which is also freeware + plays Mp3s/Ogg + has an alarm built-in. It's like killing a few birds at once.
http://www.sto-helit.de/freeware/pocketpc/mortplayer-en.pl
Hey guys!!
Just back my O2 Atom Exec and updated it to WM6. I have an extensive collection of loseless audio and i was curious as to which media player supports it. They are in a couple of format, with most of them being in .wv and .ape and the rest in .flac.
I have installed Coreplayer and Pocket Player 3.2 and tried .wv and .flac files.
Coreplayer plays .flac fine but the library kind of sucks and it ain't easy to browse through your collection of music. However, it wont detect the .wv file.
Pocket Player on the other hand simply wont work with either despite claiming on the website that it does. I have tried opening the .flac audio manually but the name of the song (time after time) becomes illegible (like with my chinese song) and when i try to play it, it doesnt work. It says the filetype is .mp3 but that is not true, it is actually .flac....what the?? Also tried to manually open .wv but doesn't work either
So i am confused as to which program actually does work with all the lossless format? Could someone enlgihten.
Btw i did find this link http://www.losslessaudioblog.com/2006/12/16/mobile-lossless-players/
that had all the supported player that claims to support loseless format.
Also, could someone explain why i cant read chinese/japanese filenames? Any fixs so i can see it properly on pocketplayer/coreplayer?
Common guys, as if no one prefers loseless over mp3..
Sorry mate, I used to play flac using TCPMP( free version of coreplayer) was impressed with the sound but not the size of the files. sticking to AACplus now, good luck
haha are you joking get a bigger memory card or one of those special mp3 player
the quality is just so much better
davidw89 said:
haha are you joking get a bigger memory card or one of those special mp3 player
the quality is just so much better
Click to expand...
Click to collapse
Music file size ratio is generally a personal preference and you dont just go 'haha' on others preferences. If bigger memory card is not your problem, I'd guess you can always play the high quality lossless WAV on your WMPlayer
Anyway, not much help from me here, read on if you wish.
Anyway, as for lossless or not audio file format, I really wonder how much difference does it make. I personally can't really tell the difference as I'm using relatively low quality earphones and stuff, and consider I listen it when I'm on the move, where you get street noises and such (despite the noise isolation property of the earphones). So, it would be interesting if you were to do a blind test yourself on a relatively real environment. That, is to get a list of songs, say 10-20 songs, all both in the flac, and mp3 formats. Get a friend of you to play you these songs at random (using Coreplayer, which support both format), then you make a guess on which format the song is playing. Get a good number of samples and see if you score above 75%. If you score around 40-60%, chances are, you are thinking (mentally biased) that the sound is actually better than it is (e.g. due to the distortion of the A2D converter, crack in the shielding screen on your headphone, street noises, etc.). If you were to score 25% or lower, that's interestingly MP3 is better (much unlikely).
If you really do this, let me know the results Much eager to know it.
Problem for me is, I am the type who like to have just one device to rule "do" them all, that's why my lowly wizard does it all, my video player, music player, pda and telephone. I only got 2Gb but I got heaps of songs on it plus some movies.
AAc plus is good mate better than MP3 IMHO, I heard flac but the size is just not worth it.. and I don't clean my ears that often ;-) so why bother..
I am looking for a PC software to make MP3 ringtones out of my MP3s. I am looking for a software which is easy to use. Easily cut Mp3s by marking Begin & End by buttons like MP3 Cutter, but I am also looking to increase my ringtone volume from within the software more like PocketDivxEncoder. Which one to use??
MP3 splitter is cool.
PM me and I will email you the programme.
Rob
http://www.goldwave.com/
free too
I use a program called Audacity, works very well
Robbie#65 said:
MP3 splitter is cool.
PM me and I will email you the programme.
Rob
Click to expand...
Click to collapse
MP3 Splitter doesnt have the option to increase volume, any other
mushipkw said:
MP3 Splitter doesnt have the option to increase volume, any other
Click to expand...
Click to collapse
use nero wave editor this can do all kind of editing and format conversion.
Try this
You can use itunes to convert you music files into mp3 and you can create ringtones with itunes. Just right click on the mp3 file you want as a ringtone and click create ringtone.
Crotalus said:
I use a program called Audacity, works very well
Click to expand...
Click to collapse
I too use Audacity and it's free. Easy to use, I didn't know anything about editing music files and I figured it out...
I have found Mobile Ringtone Converter, its basically modded version of Audacity with the function to increase sound gain. N I am using it for now.
uzbek
for me goldwave so far, must try
Hi the I have all my music in .wma format will not play on my sidekick 4g please help
Use a different player? Try doubletwist rocket player or something like that it should work.
If not you have to get mp3 files (mp3 is actually the best for music as it saves more space then most do)
Sent from my SGH-T839 using xda app-developers app
MP3 was developed in early 90s... Yes, it is still the most popular music format, but NOT best in any way. AAC+ is at least twice smaller at same quality, FLAC sounds much better, etc...
But anyway, there are many players for any audio format for any Android phone. Artofdying9's question is pretty strange.
I use mp3 sac an all that is too annoying to covert 3k songs
Sent from my SGH-T839 using xda app-developers app