i9020T T-Mobile East-coast USA
Most of the APN settings online are a bit dated and T-Mobile's site is for generic Android phones.
What is the current APN settings for us?
In also for an answer
Related
can anyone give me the t-mobile settings for mms for my unlocked fuze
Have you tried either the t-mobile site? or simply googling for the info? In less than a minute i can find the settings for UK & US T-mobile settings using a simple search.
I've checked the forums and while I see some mentions of ATT configs I don't see much for TMo.
I have a Lumia 710, and a tmobile version Straight Talk sim. I had the sim cut by TMO in order to fit the phone and calling and texts work well. However I can't enable the cellular data. I checked Straight Talks setup info and in Android it's as detailed, but in WP7 it's a lil different(I guess mms and APN are in diff pages).
I tried just setting APN to wap.tracfone and nada. Is there anyone else who is having or has had this issue to give some suggestion? Again, most of what I've found here and elsehwhere are all about using an ATT sim.
EDIT: Not sure if it's necessary to note, but I had to flash the 1600.3031.8773.12121 firmware from australia, no network there just says Australia 227.
EDIT: I also have the the Nokia Network Setup app due to this, but it gives me no options just auto does whatever and says "T-Mobile". The APN settings that have worked for me in the past is to set the APN and port alone, however the APN settings in WP7 want a proxy/url with a port. I've seen this mentioned in another post from April after some more googling, but o replies there also.
My MyTouch is actually a HTC Panache from Moblicity, which is apparently the same phone with a different name. I usually use it with WIND Mobile, and when I go to the US, I use my T-Mobile SIM. On my old Hawauai U8100, this was not a problem, and all APNs changed automaticly, and i had no problem using data in the US or Canada. On this phone, however, APN setting are cleared every time i remove the SIM. I already have the settings for WIND and T-Mobile, so I can re-enter them every time, however i noticed that T-Mobile uses the AT&T network in places that there is no T-Mobile coverage (such as upstate NY), so when I am there I only have voice & SMS, but no data, as I do not have AT&T APN setting.
So first of all, I would like to know how my old phone got APNs automaticly, and if that would be possible on the MyTouch, and if not, what are the APN settings for the AT&T network that is shared with T-Mobile?
I know that this is probably an APN settings issue, however, it appears US Cellular has disabled access to that setting. Is there anyway around it and any other US Cellular users experiencing issues?
Here is a picture of my screen in the settings where it is usually located.
APN Change
Hi I am using a US Cellular S6 on Verizon so needed to do something similar.. You can use an app to change APN. It's called APN change.
I just bought a Z3 D6616 off of eBay that was listed as "Unlocked". To me unlocked means that it will work on other networks, so I did not worry that I was going to use the phone on AT&T. I got the phone today and took it down to get a NanoSim for it (my old phone used a MicroSim). The guy at the AT&T set it up and got the sim installed, and the phone can receive calls, but it has no data service at all. I mean none!. I looking through every article I can find online and they all say that the D6166 is locked to T-Mobile and cannot be configured to receive data on the AT&T network.
Is this true? I really like this phone. Is there any hope of fixing this problem? Please!
Check you APN info.
Settings > more > mobile networks > Access point names
Then press the plus sign and enter the details for your carrier. That was how I got mine working.
You mentioned AT&T, I'm going to guess in America and a quick google search gave me these details
https://www.att.com/esupport/article.html#!/wireless/KB424489
APN - phone
Password - Not set
WAP Gateway - proxy.mobile.att.net
WAP Gateway Port - 80
MMSC - http://mmsc.mobile.att.net
odunke01 said:
Check you APN info.
Settings > more > mobile networks > Access point names
Then press the plus sign and enter the details for your carrier. That was how I got mine working.
You mentioned AT&T, I'm going to guess in America and a quick google search gave me these details
https://www.att.com/esupport/article.html#!/wireless/KB424489
APN - phone
Password - Not set
WAP Gateway - proxy.mobile.att.net
WAP Gateway Port - 80
MMSC - http://mmsc.mobile.att.net
Click to expand...
Click to collapse
Thanks, but I tried that first thing and it did not work. I spent hours on the phone with AT&T and they gave me all the settings over the phone and it did nothing. Do you have the Z3 model D6616 or the D6603? The D6603 can be used with AT&T, but so far I have found no way to get the D6616 to work and nobody else that has either.
I have the international D6616 version with an unlocked bootloader. Changing the apn was what worked for mine. I am connecting to a German provider, so maybe it is an At&t issue.
It's very possible that the area you are in does not have the supported ATT LTE band that is compatible with your phone. Since the D6616 was designed for T-mobile, it will only have Bands 2, 4, and 12. ATT's primary LTE data band is Band 17, and that is not supported by your phone. ATT also supports band 2, 4, and 5 as well, but there is a good chance that those bands are not in your area by ATT