The credits for this rom should ALL go to SebastianFM from his original thread: http://forum.xda-developers.com/showthread.php?t=1025330
He has made numerous changes and compiled modified libs to get this port running...
Features Sense 2.1 and GB 2.3.3...
Code:
Working:
-Wifi
-Bluetooth
-GPS
-GSensor
Code:
Changes Made:
-Modified EZTerry 26364-s3 kernel (Added "turbo" mode for msm7201a, htc usb enable)
-Zram 48mb
-SDEXT for htc dream...
Code:
Requirements:
HTC Magic: "MTD 180 2" (sd-ext not used)
HTC Dream: "MTD 75 2" + 512mb ext4 sd-ext
I will be releasing a stripped version later.. This may be too slow for hTC dream but it runs fine on my htc sapphire. Let me note that the speed is not stellar but it is decent enough for daily usage. To be frank, I would rather use an AOSP/CM rom than this but here it is for you to mess with.
Download:
http://uniteddev.com/wordpress/files/DS_SFM_3.0.2_FULL.zip
FIX UPDATER-SCRIPT ERROR:
http://w261678.open.ge.tt/1/files/798xb0G/0/blob?download
Click to expand...
Click to collapse
Also, I am working on porting SFM's HTC Salsa based kernel from 32A to 32B but I am having trouble getting it to boot. If you are seriously interested in helping, just send me a pm and I will give you the link to the source.. Currently I am using ezterry's 2.6.36.4 aosp based kernel with a few changes I made myself, but it is not completely compatible with our needs as camera does not work and HW acceleration isn't fully working.
e334 said:
The credits for this rom should ALL go to SebastianFM from his original thread: http://forum.xda-developers.com/showthread.php?t=1025330
He has made numerous changes and compiled modified libs to get this port running...
Features Sense 2.1 and GB 2.3.3...
Code:
Working:
-Wifi
-Bluetooth
-GPS
-GSensor
Code:
Changes Made:
-Modified EZTerry 26364-s3 kernel (Added "turbo" mode for msm7201a, htc usb enable)
-Zram 48mb
-SDEXT for htc dream...
Code:
Requirements:
HTC Magic: "MTD 180 2" (sd-ext not used)
HTC Dream: "MTD 75 2" + 512mb ext4 sd-ext
I will be releasing a stripped version later.. This may be too slow for hTC dream but it runs fine on my htc sapphire. Let me note that the speed is not stellar but it is decent enough for daily usage. To be frank, I would rather use an AOSP/CM rom than this but here it is for you to mess with.
Also, I am working on porting SFM's HTC Salsa based kernel from 32A to 32B but I am having trouble getting it to boot. If you are seriously interested in helping, just send me a pm and I will give you the link to the source.. Currently I am using ezterry's 2.6.36.4 aosp based kernel with a few changes I made myself, but it is not completely compatible with our needs as camera does not work and HW acceleration isn't fully working.
Click to expand...
Click to collapse
What would you describe as "decent enough for daily usage"?^^ Because if i would define that, it's like no laggs and stuff and not force closing and beeing stable.
If you want you can take some stuff from my thread design or whatever.
Well it's stable for sure.. No hanging on 32B sapphire.
ill test it on the dream soon
Please keep in mind that I will not be giving any support... You are on your own
i was run rom but slow....
vuvantuan59 said:
i was run rom but slow....
Click to expand...
Click to collapse
It should be quicker on Sapphire than G1/Dream, due to the ROM being stored in internal memory(ROM). On G1, the Rom is stored partially on SD and uses various links. And I think the magic has 288MB RAM vs 192 in G1.
I am on 32B sapphire with 192 ram.. it runs *decently* but I wouldn't recommend this for daily use right now. It should be after I strip it of its widgets and sense apps.. (which by then would be pointless build other than the HTC Launcher lol)
It *does* run faster than previous builds because it uses zram (compcache) instead of swapping which makes it even slower.
I understand. that's my personal opinion. and I want to comments with you....
Thanks
Sent from my HTC Dream using XDA
Go figure I talked so much smack to get this re-released, and my dumb a$$ can't even get this bad boy to boot. Im somewhat sure i have to re partition my card. It just wont even install. OHHH THE IRONY!!
yeah it shows an error while installing...tried a couple of times with amon ra,cwm2&4..but no luck...
Khizzer said:
yeah it shows an error while installing...tried a couple of times with amon ra,cwm2&4..but no luck...
Click to expand...
Click to collapse
Oh thank the Devs ( lol see what I did there) I thought it was just me. Are you getting error at SD/... status (0). That's what I'm getting. I thought maybe I have to repartition my SD but my SD is petitioned with everything maxed out to the highest settings. It installed once but I stuck at the g1 screen. I guess I just keep trying
let me see..
The error is because of updater-script. I added a fixed updater-script, just replace it in the zip. (META-INF/com/google/android/updater-script)
e334 said:
The error is because of updater-script. I added a fixed updater-script, just replace it in the zip. (META-INF/com/google/android/updater-script)
Click to expand...
Click to collapse
Awesome, thanks. Gonna try it right away. Ill just edit this post withthe results so I don't clutter up the thread.
Edit: I'm getting no love from this rom. It just wont install, and I tried every different way. With cMTD, firerats mtd regular mtd but it just wont boot. I have to be doing something wrong.
should i flash a kernel over it...
it doesnt boot...
any flashing instructions would be good...
Mine does not boot too. It seems that /sd-ext can't be mounted
ThauExodus said:
Mine does not boot too. It seems that /sd-ext can't be mounted
Click to expand...
Click to collapse
I've tried it on a T-Mobile myTouch 3G (GSM) PVT32B with latest Radio combo and booted!
Here's what i've done, following the BananaBread thread method of flashing:
Flashed using: CWM 2.5.0.7 (only version i found to support SD-Ext!) in this order:
1) recovery-v1.5.9-Alpha3-CustomMTD_S.zip
2) mtdpartmap.txt (i put 230 for OS and 6 for Swap, which left me with 230 for apps)
3) ohsaka-super-wipe.zip
4) Flashed DS_SFM_3.0.2_FULL.zip (after implementing the fix mentioned of updater)
5) Booted!
Works:
- WiFi
- Bluetooth (Turns on and Paired with my PC)
- Widgets
- Market
- GPS (tested with iGO)
- SetCPU (autodetect works!)
- Restart / Power Off
Doesn't Work:
- Camera (kept crashing)
Can't Test:
- Calls (i don't have a spare SIM card for this phone)
I've attached LogCat of all the operations i've done, including trying to open the Camera.
All-in-All, pretty good rom, not the fastest of the bunch but still works really nice for such an old device (this IS the very 2nd Phone that came out with Android!).
I do wish they could fix the camera
doesnt work for me....and i didnt get the sd-ext thing...should i mount it manually...
Khizzer said:
doesnt work for me....and i didnt get the sd-ext thing...should i mount it manually...
Click to expand...
Click to collapse
Which version of CWM are you using ?
Related
These are entirely unchanged from the ROMs on the thread over in Dream land below (apart from one small fix for Exchange in version 1.0)
http://forum.xda-developers.com/showthread.php?t=534479
These are JAC and Drizzy's ROMs, not mine - all I've done is unpack the ROM, change one file in boot.img to make it work on a Magic, and then repack it all and sign it. So we'll forego the sigfile saying "if you like my work please buy me a Ferrari". However, this whole thing is a bit of a faffy operation and not something that's simple to set up (although is easy enough once you have everything you need in place) so I thought I'd share and save others the grief rather than hogging all the fun for myself.
These have come about because I wanted a Hero ROM, but wasn't entirely satisfied with the best one available for the Magic (Qtek's, IMO). It worked well, but the swap version dropped SMS messages sometimes, and the Compcache version was buggy, sluggish, and wifi didn't work.
JACxHERO seems to have a number of the same issues that Qtek has - dropped SMS messages (it seems that the lack of memory on the device causes the SMS/MMS process to die), and the Compcache version has broken Wifi. I said earlier on that I thought this version was oddly sluggish, but after setting up Compcache with backing swap I am loving it. By far the best Hero ROM on my own setup so far. No Wifi is a drag but I can live with it for now.
JACHeroSki 2.7.4.r2 in contrast is an older build, and one suspects they're using an older kernel; it has a working Compcache setup, but no conventional swap at all, and no multitouch. A good call if you have a slow SD card, can live without multitouch, and positively have to have wifi.
Bottom line as I see it:
Fast SD card? Use JACxHero v1.2. But you might lose SMSes (that said, no-one's reported any yet - I just worry about lack of memory issues)
Slow SD card but need wifi, and can live without multitouch? Use JacHeroSki 2.7.4 r2.
Slow SD card and want multitouch, or you insist on Compcache for other reasons, and not interested in wifi? Use JACxHero v1.0.
I personally am running 1.0 and after not being keen initially, it is growing on me and turning into a keeper. I only ever use wifi when at home and can do without it there, so it's not a problem for me.
----
JACxHero Version 1.2 - seems fast, but no Compcache
http://www.4shared.com/file/123726235/aa3ee695/jacxhero12-pn-magic.html
JACxHero Version 1.0 - Compcache, WiFi doesn't work properly. Works well if you enable backing swap and up the swappiness. See my user.conf on page 3 of the thread.
http://www.4shared.com/file/123729537/191c816a/jacxhero10-pn-magic.html
http://www.4shared.com/file/123821706/7250ac6b/jacxhero10-exfix.html (version with Exchange fix - I haven't tested this but it should be fine)
(version 1.1 didn't seem to be enormously different than 1.2; I did try it and have a working .zip but don't see much point uploading it)
JACHeroSki v2.7.4r3 - Compcache works by default, as does wifi. Note, though, there's no multitouch in the browser, which is a bit fail.
http://www.4shared.com/file/123798395/c61c220a/jacheroski274r2-pn-magic.html
NOTE THAT ALL OF THESE NEED THE USUAL THREE PARTITIONED SD CARD! i.e. fat32/ext2/swap
why have the v1.2 no compcache?
eljuego
As a note remember that JACxHero Roms dont have Compcache enabled by default.
The first post in the Dream Forum JacxHero thread tells you how to enable it - you need to edit the user.conf file, which i think is in /system/bin, can't remember right now.
It tells you which settings to change to get each combination of linux-swap and compcache
(BTW I know as it's working for me...)
Is it for 32A or 32B?
The rom for 32a or 32b ?
dazcox5181 said:
As a note remember that JACxHero Roms dont have Compcache enabled by default.
The first post in the Dream Forum JacxHero thread tells you how to enable it - you need to edit the user.conf file, which i think is in /system/bin, can't remember right now.
It tells you which settings to change to get each combination of linux-swap and compcache
(BTW I know as it's working for me...)
Click to expand...
Click to collapse
Good spot, I should have pointed this out.
gdskp said:
Is it for 32A or 32B?
Click to expand...
Click to collapse
32B - sorry, have now edited the thread title.
eljuego said:
why have the v1.2 no compcache?
eljuego
Click to expand...
Click to collapse
No idea mate. I suspect it was because of the issues with WiFi that they removed it until they could fix it.
One oddity I've noticed - the weather widget doesn't work. i select London as a city, it has a bit of a churn saying "loading weather", and no weather ever turns up. Clicking into the weather app workable fine.
Snap judgement - it's not as fast as Qtek's Rom. Just feels a bit "off". Maybe it's just me.
Loccy, the widget are buggy you sure you have ported the version 1.2 not the version 1.1 ? In version 1.2 the widget are fixed
edit : The widget have no border, but the rom is really fast probably the fastest rom i have tested !!!!
setenza01 said:
Loccy, the widget are buggy you sure you have ported the version 1.2 not the version 1.1 ? In version 1.2 the widget are fixed
edit : The widget have no border
Click to expand...
Click to collapse
Am pretty sure I called 1.2 the right filename but I was drowning in roms by the end so it is possible I got them mixed up. Can't check until I get home now though.
Either way I'm not too impressed - more bugs than Qtek and it is eating battery (although I have been hammerring the phone more or less constantly over the few hours I've been out). I think when I get home I'm going to build the final JacHeroski Rom and see how that goes, I believe that has Compcache running.
Dazcox, how are you finding this Rom? You've been running it longer than me.
Actually I've been using QTek today... but about to install this one will let you know
setenza01 said:
edit : The widget have no border, but the rom is really fast probably the fastest rom i have tested !!!!
Click to expand...
Click to collapse
Really? It's not a patch on Qtek for me. How fast's your SD card?
Am just downloading the final release of JacHeroSki - v2.7.4r2 - and will give that a try. I wonder if some of these new releases are a little too bleeding edge to be useful. If a worthwhile update.zip for the 32B emerges I'll post it here.
dazcox5181 said:
Actually I've been using QTek today... but about to install this one will let you know
Click to expand...
Click to collapse
I thought you'd done your own boot.img hacking and were running this already..?
I have a 8Gb class 6 sdcard and it's really fast more than the qtek rom
The 2.7.4r2 good idea, you make the port today ?
Loccy said:
Really? It's not a patch on Qtek for me. How fast's your SD card?
Am just downloading the final release of JacHeroSki - v2.7.4r2 - and will give that a try. I wonder if some of these new releases are a little too bleeding edge to be useful. If a worthwhile update.zip for the 32B emerges I'll post it here.
I thought you'd done your own boot.img hacking and were running this already..?
Click to expand...
Click to collapse
now I am, tried all the other builds myself
setenza01 said:
I have a 8Gb class 6 sdcard and it's really fast more than the qtek rom
Click to expand...
Click to collapse
Ah. I have the stock 2Gb Vodafone pile of ****e (plus an "8Gb class 6" that I bought from ebay that causes a reboot loop on my Magic ). That'd probably be the problem for me.
Right chaps, here's another one for you. This is JacHeroSki version 2.7.4 r2. Someone else here has done JacHeroSki previously*, but I don't think they ever updated to the final release. It's a little behind the curve in that JAC seems to have gone on to work with Dizzy, and in a different direction, and it won't see any more development. It has working Compcache, but lacks the fancy config scripts of later builds. If you want to play with your Compcache settings, you need to edit the a2sd script in /system/bin. No conventional swap or facility for one. I'd say this is pretty much where Qtek was trying to go with his Compcache ROM though:
http://www.4shared.com/file/123729537/191c816a/jacxhero10-pn-magic.html
Am not sure I'm going to stick with this, however. I've just seen in the thread on the Dream forum that you can get Compcache working in JacXHero 1.2 by nabbing the boot.img from 1.0, so I'll give that a go too. What I'd really like is a working ROM with Compcache and swap as a backup.
edit: * speak of the devil, it's just turned up on the front page of the threads, they did do the final release, but it was for 32A not 32B. Oh, and am very disappointed to find no multitouch in the browser.
Does texting work fine on this ROM?
bhav007 said:
Does texting work fine on this ROM?
Click to expand...
Click to collapse
Honest answer? I don't know. I got a couple of text earlier when running JACxHERO 1.2, and I was hammering the browser at the time (if icanhascheezburger.com isn't going to run you out of available memory, I don't know what is). But I think a definitive answer will have to come from people who text more than I. Unfortunately texts seem to be an issue on all Hero ROMs on the G1 and the Magic 32B, because of memory - hence why my goal is to get a build with as much "memory" as possible, even if most of it is swap and compcache sleight of hand.
Loccy said:
Honest answer? I don't know. I got a couple of text earlier when running JACxHERO 1.2, and I was hammering the browser at the time (if icanhascheezburger.com isn't going to run you out of available memory, I don't know what is). But I think a definitive answer will have to come from people who text more than I. Unfortunately texts seem to be an issue on all Hero ROMs on the G1 and the Magic 32B, because of memory - hence why my goal is to get a build with as much "memory" as possible, even if most of it is swap and compcache sleight of hand.
Click to expand...
Click to collapse
Am getting a boot loop after clean flashing this rom, any ideas why?
bhav007 said:
Am getting a boot loop after clean flashing this rom, any ideas why?
Click to expand...
Click to collapse
Which one? I found I had to completely clean off my ext2 partition before it'd run (coming from the Qtek ROM). Well, actually what I did was go into the recovery console and shift everything the Qtek had left in ext2 into another directory so that this ROM didn't get confused by it
bhav007 said:
Am getting a boot loop after clean flashing this rom, any ideas why?
Click to expand...
Click to collapse
If you were coming from Qtek's Rom, like I did, It does boot loop unless you clean your ext partition first, then wipe and reinstall the rom. It runs like a champ.
to erase the ext: boot into recovery
then from adb shell : run
mount -o rw /dev/block/mmcblk0p2 /system/sd
rm -rf /system/sd/*
then do whats stated above and no boot loop anymore.
PS: Loccy thx for the port.
PPS: to get this working with compcache instructions are in the first post of the dream rom
r1tman said:
If you were coming from Qtek's Rom, like I did, It does boot loop unless you clean your ext partition first, then wipe and reinstall the rom. It runs like a champ.
to erase the ext: boot into recovery
then from adb shell : run
mount -o rw /dev/block/mmcblk0p2 /system/sd
rm -rf /system/sd/*
then do whats stated above and no boot loop anymore.
PS: Loccy thx for the port.
PPS: to get this working with compcache instructions are in the first post of the dream rom
Click to expand...
Click to collapse
Am abit new with the terminologies here . Is there a guide I can follow to do the clean wipe. If i reformat my SD card to the necesarry partitions, it should work?
bhav007 said:
Am abit new with the terminologies here . Is there a guide I can follow to do the clean wipe. If i reformat my SD card to the necesarry partitions, it should work?
Click to expand...
Click to collapse
Should do, if you use the partitioning option on the recovery image, that'll wipe everything.
r1tman said:
PS: Loccy thx for the port.
Click to expand...
Click to collapse
De nada. All I did was just change a few files.
I'm done for the night now people. I did try to get 1.2 running with 1.0's boot.img, but ended up with a ROM that had no working wifi and no apparent Compcache. I figured that wasn't any better than 1.0 proper (which I'm going to give another crack and see if I can tidy up the Compcache settings to my satisfaction - I can live without wifi for now).
READ FIRST - I am no longer updating my ROMs - details.
If you're following the Hero scene, you'll know that I have published a custom ROM based on the 1.73.405.5 shipping ROM. I have a Vodafone Magic (32B) and a T-Mobile G1 kicking around (and HTC want my PR review unit Hero back!), so figured it would be cool to firstly build a really simple way for me to package my ROMs for all 3 devices, and secondly try and produce an update.zip that runs on all 3!
Well, the first step is here, I have the MoDaCo Custom ROM ready to install on your Sapphire 32B device (and a 32A version is available to test).
Things you should know...
- Contents are IDENTICAL to the MoDaCo Custom ROM versions detailed here.
- I have used cyanogen's kernel from 4.0.4 (big respect to cyanogen, he's doing awesome work!)
- Now compcache ready - use this script for a big performance boost!
It has room for improvement, but it runs really sweet already IMHO!
The download link (in update.zip format for flashing in the usual way via recovery image) is at: http://android.modaco.com/content/h...-modaco-custom-rom-hero-to-sapphire-32b-port/
I've packaged Cyanogen's 4.1.11.1 BFS enabled Kernel and wlan.ko as an update.zip too (see above thread) - nandroid backup before applying!
I've quoted some of my original Hero post here, so you know what you're getting. Enjoy!
P
Changelog
2.2.1 [32A only]
32A - fixed boot.img
2.2
Fixed SU and SD card bugs.
2.1.2
Updated busybox
Now compcache ready - use this script for a big performance boost!
2.1.1
Switch to Cyanogen's kernel
Fixed G-Sensor / Compass
Fixed sound
Unified Dream / Sapphire 32B download
2.1
Initial Release
me said:
This ROM is based on the Generic 2.73.405.5 release version of the 'new update' (together with my own optimisations) for the best possible performance! The ROM is now available in 2 versions - 'core' and 'enhanced' by popular request.
Included in both 'core' and 'enhanced' versions
- Rooted with 'adb remount' permission and superuser APK
- A2SD included (fully automatic - thanks cyanogen!) - create a EXT3 partition as your second partition to use. dalvik-cache remains on device. EXT4 is NOT supported.
- Added Jbed Java
- Added Spare Parts (run it and switch the 2 animation types to 'fast' for an even better experience!)
- Added Custom Locale for setting non english Locales
- Added android-wifi-tether 1.52 (props to the developer, this is a great app!)
- Added WMSM
- Added busybox 1.15 - tweaked such that 'get information' in Swapper now works as desired
- Added nano 2.09 - text editor for use in shell mode
- Added terminfo and settings to boot.img to allow nano etc. use
- Added tun.ko file (untested, please report on whether this is useful)
- Added files required for Debian linux
- Moved Quickoffice to data partition to allow easy uninstall
- Deleted 'Learn More' application
- Deleted Maps application - install from the Android Market to always stay up to date
- ROM now includes touch focus in Camera app
- ROM now supports shortcuts using BetterCut (and therefore I assume anycut!) in Rosie
- Silenced boot sound (it's still there and can be reactivated with a file edit)
- You can now check your MoDaCo Custom ROM (MCR) version from the about menu. It will display MCR2.0 (core) or MCR2.0e (enhanced).
- Fix for HTC Peep on Vodafone now available here!
Included in 'enhanced' version only
- Added Business Card Scanner
- Added 'Plurk' client
- Added WAP browser
- Added Chinese IME
- Restored Maps app (for users who cannot install it from the Market)
Click to expand...
Click to collapse
Is this ready to go as far as elimintating the blurry screen AND wifi ??
Just asking as the 1.5 and 1.51 both gave me fuzzys, and applying the update eliminated the fuzzys but took away wifi !
Either way. Thank You SOOO much I knew if I waited you'd give us something nice for the holiday !
You think a wipe would be needed going from 1.51 to 2.1?
Gimpeh said:
You think a wipe would be needed going from 1.51 to 2.1?
Click to expand...
Click to collapse
to avoid any possible issues, I'd suggest a fresh wipe. I didnt add to much after the last rom I flashed so im gonna start over with my sdcard as well
A wipe is always wise, but SHOULDN'T be necessary...
P
Going to try this one now. How is the bluetooth support? Can paired headsets now actually work when calling?
re: support for ANYTHING other than WiFi and Camera (which both work), I don't know!
Let me know stuff that doesn't work, and i'll try to fix it in the next version.
Consider this a starting point...
P
For 32A I recommend the 2.6.29 kernel that redglasses uses on his Hero ROM:
http://www.2shared.com/file/7555649/5881ee4a/myhero-110.html
Might be stuck, d'oh!
So far, did a nandroid, wiped, etc. Updated, rebooted, and after asking for the language and network settings it's sat at a blank screen for some time. Status bar at the top, if left alone and hit the call button the dialer will appear and afterwards you'll see the unlock screen. But it just unlocks back to a blank screen. :/
So far this is the first ROM I've run into that's done this interesting bit. Will maybe reformat SD Card and rewipe, or something.
Nevermind. Rebooted, and it somehow proceeded this time around. Strange, though :/
dont really care for blutooth sound, but will it work for wireless tether ?? thats what I miss from using non hero roms.. having wifi back is also nice !!
Success!
Only noticeable thing is that when you go to far away from the home screen (going into settings, the dialer, etc), and return, it has to reload again for about 10 seconds. But once it's there it's fairly snappy.
Bluetooth pairs and works like it should! I might just hold onto this version of the ROM and tinker with it for a while.
ZiBop said:
Success!
Only noticeable thing is that when you go to far away from the home screen (going into settings, the dialer, etc), and return, it has to reload again for about 10 seconds. But once it's there it's fairly snappy.
Bluetooth pairs and works like it should! I might just hold onto this version of the ROM and tinker with it for a while.
Click to expand...
Click to collapse
have u messed with the swap yet ? 64/60 should help with that or 96/60 perhaps
i just flashed this and still am getting the fuzzys !! grr,, guess i have to flash the update over the rom and loose wifi ??
Modaco if you could shed some light it'd be much appreciated !
WiFi, etc works. Other problem : G Sensors aren't working D'oh
BRAND1SH said:
have u messed with the swap yet ? 64/60 should help with that or 96/60 perhaps
Click to expand...
Click to collapse
My swap's a bit rediculously larger. It's not that bad a lag, but only really noticeable when going back "home" from an application.
No swap or compcache etc. out of the box yet, let's fathom out the best settings together!
P
I'll upload a 32A version for someone to test...
P
modaco said:
No swap or compcache etc. out of the box yet, let's fathom out the best settings together!
P
Click to expand...
Click to collapse
modaco,
I am having all kinds of problems with this rom im still getting a blurry screen, it froze on me 3 times, im stuck in portrait and i keep getting the htc loading screen. I downloaded the file twice to eliminate possiblity of a faulty download as well.
mytouch...amonra 1.2.1, ext3. might have to go back to 1.51 that one worked great
I can confirm that this is running beautifully on my 32A device using redglasses/myhero boot.img and wlan.ko.
Seems to be significantly faster than the 1.73 builds, thank you modaco! Now you just need the 2.84+ build as well
In case nobody saw the DroidEris over at G1 forums, i will post it here for Kingsklick.
Android 2.1 with Sense UI - and may i add, the fastest one out there (faster than ANY hero ROM's ive tried, and with a few exceptions i tried them all).
This might aswell have been a HTC official release, i'm not kidding - it really is so fast.
Remember: Skip HTCsetup wizard, login to google via market
______________________________________________________________________________________________________________________________
Ok guys just like I promised you, here is a build that is the next best thing next to desire, the new 2.1 Eris leak. This is a straight port for the G1. I pulled many things from RaiderX303X's build, so be sure to thank him Some things are broken but I assure you this ROM will advance. Provide feedback please, and search the thread before duplicating a bug post.
Now, let's enjoy!
Release Name: KiNgxKxKlair DroidEris2G1
Release Version: 0.1
MD5 Sum:
Credits: Cyanogen, CCyrowski, RaiderX303X, Haykuro, MoDaCo, Stericson, JAC, Eugene373, miketaylor00, Jubeh, Twisted, Fictionless, Shafty, any other dev I forgot to mention, and most importantly, my patient lady for putting up with ma devin'
Base Firmware: 2.1
Radio Required: Latest
SPL Required: Death SPL
Partition Layout: Fat 32--EXT 4--Linux-Swap
Wipe Required: Full Wipe
Special instructions: If you decide to use Swap I use a 256MB swap partition and it flies. Delete EXT partition, create ext2 and upgrade all the way up to ext4 then flash. IF YOU DO NOT GAPPS WILL NOT WORK
Download: Latest Version 1.1.2
Older versions: Version 0.1 Version 1.0 Version 1.1 Version 1.1.1
HTC Widgets installed: Stocks, Bookmarks, E-Mail, Footprints, Photoalbum, Photoframe, Settings, Calendar, Messages, Music, Persons, Search, Sync Now, Twitter, Clock, Weather
_______________________________________________________________________________________________________________________
Recommended settings for this ROM:
256 MB SWAP (use Swapper app http://handheld.softpedia.com/get/System-Utilities/Enhancements/Swapper-79210.shtml (Why 256 mb? - Why not be sure)
Follow this topic EXACTLY: http://forum.xda-developers.com/showthread.php?t=653889 (Disables unused apps in startup/after etc., I recommend Autostarts)
Finally, use this patch to remove A2SD (if you got a MyTouch/Magic): http://forum.xda-developers.com/showthread.php?t=655256
_______________________________________________________________________________________________________________________
Just like any other dev, I am not responsible to whatever happens to your phone *surprise*
ChEerS
"I live to DEV another DAY" -My quote
Follow me on Twitter if you like my work: www.twitter.com/kingklick92
Changelog
Version 1.1.2
- No wipe update
- Audio fix
- Call quality fix
Version 1.1.1
- No wipe update
- HTC_IME fc fixed
Version 1.1
- No wipe update (if coming from 1.0)
- Now using eclair king kernel #7
- Removed BFS
- Using CFS
- Optimized by yours truly
- Getting FAST
Version 1.0
- Dropping the Beta tag
- Stable build, ran this for pretty much a week now
- Reverted to King Kernel #5
- Removed BFS
- Slight "hitchies" on Rosie are a thing of the past
- Fixed GPS
- Fixed Camera
- Fixed KeyMappings for G1 users
- Still using 10Mb RAM Hack
- Added CompCache support
- Added Mount USB
- Added Wireless Tether
- Added Wired Tether
- Added new Spare Parts
- Not optimized...YET
- I must say, this build is getting pretty snappy
- More to come
Version 0.1
- First release, very beta
- Port of the 2.1 Droid Eris leak
- A2sd is automatic! Just have that second EXT partition
- Linux-Swap is enabled by default
- Using King Kernel #6
- Using BFS 315
- No RAM Hack
- MP4 Playback Support
- Youtube playback support
- User.conf is called on and functioning
- Running fix_permissions on firstboot to keep it clean
- GPS broken
- Camera Broken
- Using Raider's optimized apk's for now until I optimize them using my method
- Be sure to read OP for instructions, or I'll bet you your Gapps will not work!
- Many things I am forgetting I will add
after you fix the camera and GPS i will try it.. (i use this **** q:
dalet11 said:
after you fix the camera and GPS i will try it.. (i use this **** q:
Click to expand...
Click to collapse
If you look at the first post, i've uploaded the files for you
i will get my NEW MAGIC in 2 days.. you got more time
can you upload some pics?
I've got this on my 32B and it really is the fastest "hero" ROM by far. However, I do have a problem, wifi doesn't work. My phone can see networks when scanning but I simply can't get it to connect at all.
Anyone know a solution?
palexr said:
I've got this on my 32B and it really is the fastest "hero" ROM by far. However, I do have a problem, wifi doesn't work. My phone can see networks when scanning but I simply can't get it to connect at all.
Anyone know a solution?
Click to expand...
Click to collapse
same here just installed
kaiya215 said:
same here just installed
Click to expand...
Click to collapse
reset your router..this should work.
Oh wow I am really tempted to try this now...guys is it really that fast?! Is this really that good that he is claiming that it should be official?!?! Im definitely getting excited..i may have to try this tomorrow
running it right now...
will report back tomorrow after using it at work and throughout the day...
initial comments is that it was alot faster than his aosp 2.1 port to 32b...this thing was blazing quick in the beginning...its settling down right now and is slowing down but still pulling through
and my trackball lights up ALL THE TIME
i dont know what notifications im getting but haha i dont care lol
kaiya215 said:
same here just installed
Click to expand...
Click to collapse
Well it just started working with no other intervention than the passing of time....
About an 1/2 an hour after posting I noticed my phone was saying it was connected to a wifi network. It just started working. I didn't reset my router.
bigballa said:
running it right now...
will report back tomorrow after using it at work and throughout the day...
initial comments is that it was alot faster than his aosp 2.1 port to 32b...this thing was blazing quick in the beginning...its settling down right now and is slowing down but still pulling through
and my trackball lights up ALL THE TIME
i dont know what notifications im getting but haha i dont care lol
Click to expand...
Click to collapse
I recommend that you setup your Swap settings with this info:
Swappiness: 40
Swap size: 96 MB
use Swap partition
Is swap required?
Have this running for 5 days now best Rom I ever flashed.
WebghostDK said:
I recommend that you setup your Swap settings with this info:
Swappiness: 40
Swap size: 96 MB
use Swap partition
Click to expand...
Click to collapse
whats the best way to do this for this rom.... i tried using the user.conf method and it seemed to slow it down....
then tried the userinit.sh method and same diffrence
unless the user config files i have are just botched from old roms.....
also i tried a adb pull of the user.conf file and it said it didnt exist mounted/un-mounted didnt make a diff.
kaiya215 said:
whats the best way to do this for this rom.... i tried using the user.conf method and it seemed to slow it down....
then tried the userinit.sh method and same diffrence
unless the user config files i have are just botched from old roms.....
also i tried a adb pull of the user.conf file and it said it didnt exist mounted/un-mounted didnt make a diff.
Click to expand...
Click to collapse
i would also like to know. the only other method that i know of is going through terminal, but everytime you reboot the values are reset and you have to manually set swappiness through terminal again.
I seem to not be able to mount the phone as a disk drive using this rom.
mmmlinux said:
I seem to not be able to mount the phone as a disk drive using this rom.
Click to expand...
Click to collapse
Known issue. Go download usb mount from market.
kaiya215 said:
whats the best way to do this for this rom.... i tried using the user.conf method and it seemed to slow it down....
then tried the userinit.sh method and same diffrence
unless the user config files i have are just botched from old roms.....
also i tried a adb pull of the user.conf file and it said it didnt exist mounted/un-mounted didnt make a diff.
Click to expand...
Click to collapse
i used the recovery the newest amon
kaiya215 said:
whats the best way to do this for this rom.... i tried using the user.conf method and it seemed to slow it down....
then tried the userinit.sh method and same diffrence
unless the user config files i have are just botched from old roms.....
also i tried a adb pull of the user.conf file and it said it didnt exist mounted/un-mounted didnt make a diff.
Click to expand...
Click to collapse
I think ive read that there would be a issue with the user.conf.
http://handheld.softpedia.com/get/System-Utilities/Enhancements/Swapper-79210.shtml
I used this, and it looks like it works
Hey all, this is a patch that will change out the kernel for King's SenseHybrid 2.3. I use this rom pretty much daily. It is a cupcake based hero, just this update speeds up the performance a bit.
Instructions:
-Wipe everything!
-Install King's 2.3 SenseHybrid (Please follow his directions.)
http://forum.xda-developers.com/showthread.php?t=563294&highlight=SenseHybrid
- Flash this update immediately after flashing King's rom
- Reboot and enjoy!
ChangeLog:
Updates user.conf (if you don't like it, change it )
Virtual mem settings adjusted
proc_cpu_en=0 # to save battery life
Updates Kernel to CM 4.2.15.1
Removes:
Meebo
HeroLED
AKNotepad
teeter
Adds:
Free Advanced Task Manager (Useful)
****I just posted a 10MB ram hack version in the thread below. It uses CM 4.2.14.1 with CFS instead.****
If you like it, then great! I've been experimenting with using different kernels on different people's roms. I'm new to it, but if anyone has any tips, they are greatly appreciated.
Red.
PS. PLEASE DO NOT ASK ABOUT BT! IF YOU HAVE READ ANYTHING ON THIS SITE CONCERNING HERO ROMS ON A G1/DREAM THEN YOU WOULD KNOW BETTER AND WOULDN'T RISK BEING FLAMED.
Sounds good I was going to flash the sensehybrid soon anyways so this sounds perfect.
Wait a few minutes..
If you can hold off a bit, I am also making a 10MB ram hack version with CM 4.2.14.1 CFS. Just testing now.
Red.
CM 4.2.14.1 10MB Ram Hack with CFS
Here is another one that you can flash immediately after flashing king's 2.3. This uses the 4.2.14.1 CM kernel and the CFS 10MB ram hack. I absolutely hate BFS on G1/Dreams! Anyways, this one should run faster. I would also look into the thread that has been posted recently about speeding up hero roms and change the line in your init.rc to keep rosie in memory. just copy the init.rc onto your sdcard and edit it with notepad++ (windows program, it is great!) and then copy it back to your root over the existing init.rc and reboot. (if this is complicated, then don't try it.)
Otherwise, Enjoy!!
will this work without an ext/swap partition?
Without ext partition...
Honestly, if you are using the Death SPL and you are running this with my ram hack, you should be ok. Unfortunately, the compcache on King's earlier roms are usually broken. I tried pushing ramzswap from the CM kernel and still no luck, but then again, I'm not as savy as some of the other dev's out there. You will just have to edit the user.conf after you finish flashing the two, you want to do the following:
First, before flashing you want to pull the user.conf from the system/bin/ directory in king's zip file. edit the user.conf using notepad++ in windows and change the linuxswap=1 to 0 so that it turns it off. then copy that file to your sdcard.
immediately after flashing the two files,
-go to console from the recovery and type the following
mv /sdcard/user.conf /system/bin/
reboot
this will disable the linuxswap and then you will be able to run the rom. But again it would be better with a swap partition.
Hope this helps.
Red.
would prefer the WG kernel but okay thanks
protomanez said:
would prefer the WG kernel but okay thanks
Click to expand...
Click to collapse
Same here, WG is great. I tried the RH CFS patch, but I got an error while flashing it. Had to restore from switchrom.
where's the wg-kernel patch for 1.5 hero roms?
Also, does multitouch still work with THIS patch?
boot loop...
?
Chabsie, telling me u got a boot loop doesn't help me resolve the problem much. You must have DeathSPL for this rom, Must be full wipe, and EXT4 partition. If that doesn't help, please list the stats for your phone, which hack u are using and where your issue occurs.
Jcarrz, WG kernel version of this is released in another thread. It is on 2nd or third page, just search.
Thanks.
Red.
Just a question, since im not an expert. but how is this cupcake based hero, when CM 4.2.15.1 is donut based? Also thanks i will give it a try now.
Snacky-cakes
domex2k said:
Just a question, since im not an expert. but how is this cupcake based hero, when CM 4.2.15.1 is donut based? Also thanks i will give it a try now.
Click to expand...
Click to collapse
HTC developed the sense UI and this port is from the HTC Hero or the earlier Droid Eris (Prior to upcoming update from Verizon to 2.1.) Both of those phones use Cupcake as the base and then Sense UI is just a pretty cover for it. The kernel I used is from CM's Donut based roms, which is more than compatable, but again, the framework and ramdisk and everything else reflects a 1.5 environment. Enjoy the patch.
Red.
redd12345 said:
HTC developed the sense UI and this port is from the HTC Hero or the earlier Droid Eris (Prior to upcoming update from Verizon to 2.1.) Both of those phones use Cupcake as the base and then Sense UI is just a pretty cover for it. The kernel I used is from CM's Donut based roms, which is more than compatable, but again, the framework and ramdisk and everything else reflects a 1.5 environment. Enjoy the patch.
Red.
Click to expand...
Click to collapse
Got it. Thanks
Yeah it runs pretty smooth, the only thing was the contacts from Gmail did not sync, but im going to later on reflash and see what happens.
sync fix
domex2k said:
Got it. Thanks
Yeah it runs pretty smooth, the only thing was the contacts from Gmail did not sync, but im going to later on reflash and see what happens.
Click to expand...
Click to collapse
Just go back into system menu and re-sync manually and give it a minute. It will work fine. I had that happen on one of the trials.
Red.
redd12345 said:
Just go back into system menu and re-sync manually and give it a minute. It will work fine. I had that happen on one of the trials.
Red.
Click to expand...
Click to collapse
Great i will give that i try Thank you
Suggestion
domex2k said:
Great i will give that i try Thank you
Click to expand...
Click to collapse
You may like this one better.
http://forum.xda-developers.com/showthread.php?t=654789
This is the Wes Garner Ramhack. It should be slightly faster. I think that you still need to have a partition though because of the apps to sd. You would have to do complete wipe for this one again.
Red.
redd12345 said:
You may like this one better.
http://forum.xda-developers.com/showthread.php?t=654789
This is the Wes Garner Ramhack. It should be slightly faster. I think that you still need to have a partition though because of the apps to sd. You would have to do complete wipe for this one again.
Red.
Click to expand...
Click to collapse
Thanks for the link. I will give it a try, because some reason when used the other 2 cm patches the camera and camcorder will FC and so i then just flashed this rom solo and it did not fc
multitouch?
redd12345 said:
Chabsie, telling me u got a boot loop doesn't help me resolve the problem much. You must have DeathSPL for this rom, Must be full wipe, and EXT4 partition. If that doesn't help, please list the stats for your phone, which hack u are using and where your issue occurs.
Jcarrz, WG kernel version of this is released in another thread. It is on 2nd or third page, just search.
Thanks.
Red.
Click to expand...
Click to collapse
Sorry for being vague. I had everything right except ext3 instead of ext4. I'm looking for some directions on how to upgrade. If you have any please let me know, thanks.
This is a fully functioning Froyo Rom based off CM6 Latest Nightly Build
please post any issues you may have here - not in cyanogen mod, as my changes may have been the cause
always recommend that you backup whatever you need - wipe and then install - as I am now using the data partition for some apps
to enable overclock greater than 576mhz see this thread for alternate kernels
note : let me know what frequencies you have problems at though so I can judge for future oc better if you choose to use these - NOTE: has not been updated lately and these OC kernels may or may not work - I just use 576 mhz
Dumfuqs Kernel Corner!
Using the 710mhz kernel I can get Mflops on linpack with JIT enabled of >= 4.8
Here are the Links! :
After Each Update I always recommend a wipe if any problems are experienced - though u may not have too
32A - 3.22 Radio ( Eg. - Rogers HTC Magic and Rogers HTC Dream)
If YOU DO NOT WANT BLACK CLOCK THEN MAKE SURE TO CHANGE THE SETTINGS IN CYANOGEN SETTINGS!!!
FroyoRedux-1.9.5-32a.zip - 64.4 Mb
32B - 2.XX Radio (Eg. - MT3G, G1, MT3G 1.2)
If YOU DO NOT WANT BLACK CLOCK THEN MAKE SURE TO CHANGE THE SETTINGS IN CYANOGEN SETTINGS!!!
FroyoRedux-1.9.5-32b.zip - 64.4 Mb
Optional Themes :
Sense Style Theme : 195-sense_theme.zip - 3.1 Mb
Galaxy S Style Theme : 195-Galaxy_theme.zip - 3.2 Mb
(if you are not using 6.35 radio then disregard this section!! for magic 6.35 radio only!)
32a - 6.35 Radio Patch
carz_6.35_v0.67-signed.zip - 3.3 Mb
camera does not work - please report issues to carz via his thread in this forum
You must be using cursors modified recovery for it to install proper - 6.35 recovery image download
Code:
fastboot flash recovery recovery-RA-Magic32A-6.35-v1.6.2.img
Flash the recovery on the new radio only!!
Droid Basement Blog - Pershoot Source
CM Source
Carz Source
Credits - Thanks to Cyanogen, Pershoot, Bcrook, anderweb, dumfuq,carz and everyone who helped make this possible!! thanks as it is your work that made this possible
First
Thank you for the rom . will check it out!
Second
Installing now
Hah! and I thought I was going to bed. lol
Thanks!
First thoughts, AWESOME
I haven't installed anything and this ROM has IMPRESSED me like no other.
Logging into Market now, will advise when getting my apps fully recovered.
This looks GREAT
Once they get apps2sd for EXT 2 working I will try this...
Awesome dude. Thanks alot. Been looking for CM 614mhz kernel for a while.
Does wifi work on this ROM?
Every other nightly i have flashed has had no wifi
ok iam trying this rom now.
i hope it havent got memory leak issues like i had with all cm roms.
will give feedback soon!
//Nick
my impressions:
i dont find this rom good man.. sorrym
wifi works.
but this thing got memoryleak issues too as the original cm rom.
when everything is killed i got 23 mb free ram !!!!
this is sooooo low.
so everytime i left an app the homescreen is restarting every time
if you fix the memory leak issues it would be great!!!!!
//Nick
EDIT: who wants to see the memory leak and everytime restarts homescreen ?
pm me for my msn and i will show you at cam..
nickislauw said:
my impressions:
i dont find this rom good man.. sorrym
wifi works.
but this thing got memoryleak issues too as the original cm rom.
when everything is killed i got 23 mb free ram !!!!
this is sooooo low.
so everytime i left an app the homescreen is restarting every time
if you fix the memory leak issues it would be great!!!!!
//Nick
EDIT: who wants to see the memory leak and everytime restarts homescreen ?
pm me for my msn and i will show you at cam..
Click to expand...
Click to collapse
its all in how you set the rom up...
personally, this rom flies...
using:
no jit (havent played with it yet)
- swap (swapper 2, partition option unchecked, 32mb w/ 30 swappiness)
- no compcache
the only problems i have soo far is...
- surface dithering cant be disabled,
- cant increase
other than the few apps i didnt like (deleted them with titanium)
everything else is golden, solid work sir
Michaelr219 said:
its all in how you set the rom up...
personally, this rom flies...
using:
no jit (havent played with it yet)
- swap (swapper 2, partition option unchecked, 32mb w/ 30 swappiness)
- no compcache
the only problems i have soo far is...
- surface dithering cant be disabled,
- cant increase
other than the few apps i didnt like (deleted them with titanium)
everything else is golden, solid work sir
Click to expand...
Click to collapse
ok i got 128 mb swap on my mem card but how do i enable it in CM???
Nice!
Best Froyo Rom i`ve had so far ... ! Thx
nickislauw said:
ok i got 128 mb swap on my mem card but how do i enable it in CM???
Click to expand...
Click to collapse
download swapper 2 from market
open it
hit menu
go to settings
pick your settings for size and swappiness
(recommended is 32mb and 30 swappiness, anything more = overkill)
reboot
after reboot
open terminal and type
Code:
su
free
it should show total mem + swap
hope that helps
How is the battery life?
The last 2 versions of CM have been killing me, i had to switch back to Dwang 1.7.1 for an every day ROM.
ekeefe41 said:
How is the battery life?
The last 2 versions of CM have been killing me, i had to switch back to Dwang 1.7.1 for an every day ROM.
Click to expand...
Click to collapse
i miss dwang... fastest most stable rom everrrrr
but, its too early to tell... im gonna let it run out of juice
wipe battery stats
full charge (phone off)
and wipe stats again
then report back tomorrow...
this rom is solid though, closest to dwang in speed and stability with loadssss more features...
i just need someone to help with the vm heap size and dithering issue i mentioned earlier (cant change them, even after reboot)
maybe swap has something to do with it... im gonna disable it and retry
ill report back
ps - for the titanium restore... make sure the new option in the menu for 2.2 users is checked or it WONT WORK!!!!
please add to the first post
hee michael,
i enabled swap with swapper 2 but can i now remove the program??
i setted the swap so theres no need for the program? can i remove it ?
//Nick
nickislauw said:
hee michael,
i enabled swap with swapper 2 but can i now remove the program??
i setted the swap so theres no need for the program? can i remove it ?
//Nick
Click to expand...
Click to collapse
you can try, and then run the terminal command again to see if the settings stick... i dont believe they will tho without running the firerat patch... but then at that point, it will default to whatever swap settings you have on a userinit or your partition... its funny you asked that, cause i was just looking at my free mem thinking the exact same thing
I just installed it and I like it. But I can't find flash sites working. Is there a way to enable this? Thanks!
Michaelr219 said:
you can try, and then run the terminal command again to see if the settings stick... i dont believe they will tho without running the firerat patch... but then at that point, it will default to whatever swap settings you have on a userinit or your partition... its funny you asked that, cause i was just looking at my free mem thinking the exact same thing
Click to expand...
Click to collapse
LOL ISNT THIS funny? after swap etc... i got like 38mb free ram!!!!!!!
this is great man!!!!!
PS: look at the 2 links for the pictures of ram and command line of swap.
is the swap still enabled now??? the screenshot was taken after i removed swapper 2
link 1:
http://img834.imageshack.us/i/afbeelding2.jpg/
link 2:
http://img51.imageshack.us/i/afbeelding3o.jpg/
//Nick