These are entirely unchanged from the ROMs on the thread over in Dream land below (apart from one small fix for Exchange in version 1.0)
http://forum.xda-developers.com/showthread.php?t=534479
These are JAC and Drizzy's ROMs, not mine - all I've done is unpack the ROM, change one file in boot.img to make it work on a Magic, and then repack it all and sign it. So we'll forego the sigfile saying "if you like my work please buy me a Ferrari". However, this whole thing is a bit of a faffy operation and not something that's simple to set up (although is easy enough once you have everything you need in place) so I thought I'd share and save others the grief rather than hogging all the fun for myself.
These have come about because I wanted a Hero ROM, but wasn't entirely satisfied with the best one available for the Magic (Qtek's, IMO). It worked well, but the swap version dropped SMS messages sometimes, and the Compcache version was buggy, sluggish, and wifi didn't work.
JACxHERO seems to have a number of the same issues that Qtek has - dropped SMS messages (it seems that the lack of memory on the device causes the SMS/MMS process to die), and the Compcache version has broken Wifi. I said earlier on that I thought this version was oddly sluggish, but after setting up Compcache with backing swap I am loving it. By far the best Hero ROM on my own setup so far. No Wifi is a drag but I can live with it for now.
JACHeroSki 2.7.4.r2 in contrast is an older build, and one suspects they're using an older kernel; it has a working Compcache setup, but no conventional swap at all, and no multitouch. A good call if you have a slow SD card, can live without multitouch, and positively have to have wifi.
Bottom line as I see it:
Fast SD card? Use JACxHero v1.2. But you might lose SMSes (that said, no-one's reported any yet - I just worry about lack of memory issues)
Slow SD card but need wifi, and can live without multitouch? Use JacHeroSki 2.7.4 r2.
Slow SD card and want multitouch, or you insist on Compcache for other reasons, and not interested in wifi? Use JACxHero v1.0.
I personally am running 1.0 and after not being keen initially, it is growing on me and turning into a keeper. I only ever use wifi when at home and can do without it there, so it's not a problem for me.
----
JACxHero Version 1.2 - seems fast, but no Compcache
http://www.4shared.com/file/123726235/aa3ee695/jacxhero12-pn-magic.html
JACxHero Version 1.0 - Compcache, WiFi doesn't work properly. Works well if you enable backing swap and up the swappiness. See my user.conf on page 3 of the thread.
http://www.4shared.com/file/123729537/191c816a/jacxhero10-pn-magic.html
http://www.4shared.com/file/123821706/7250ac6b/jacxhero10-exfix.html (version with Exchange fix - I haven't tested this but it should be fine)
(version 1.1 didn't seem to be enormously different than 1.2; I did try it and have a working .zip but don't see much point uploading it)
JACHeroSki v2.7.4r3 - Compcache works by default, as does wifi. Note, though, there's no multitouch in the browser, which is a bit fail.
http://www.4shared.com/file/123798395/c61c220a/jacheroski274r2-pn-magic.html
NOTE THAT ALL OF THESE NEED THE USUAL THREE PARTITIONED SD CARD! i.e. fat32/ext2/swap
why have the v1.2 no compcache?
eljuego
As a note remember that JACxHero Roms dont have Compcache enabled by default.
The first post in the Dream Forum JacxHero thread tells you how to enable it - you need to edit the user.conf file, which i think is in /system/bin, can't remember right now.
It tells you which settings to change to get each combination of linux-swap and compcache
(BTW I know as it's working for me...)
Is it for 32A or 32B?
The rom for 32a or 32b ?
dazcox5181 said:
As a note remember that JACxHero Roms dont have Compcache enabled by default.
The first post in the Dream Forum JacxHero thread tells you how to enable it - you need to edit the user.conf file, which i think is in /system/bin, can't remember right now.
It tells you which settings to change to get each combination of linux-swap and compcache
(BTW I know as it's working for me...)
Click to expand...
Click to collapse
Good spot, I should have pointed this out.
gdskp said:
Is it for 32A or 32B?
Click to expand...
Click to collapse
32B - sorry, have now edited the thread title.
eljuego said:
why have the v1.2 no compcache?
eljuego
Click to expand...
Click to collapse
No idea mate. I suspect it was because of the issues with WiFi that they removed it until they could fix it.
One oddity I've noticed - the weather widget doesn't work. i select London as a city, it has a bit of a churn saying "loading weather", and no weather ever turns up. Clicking into the weather app workable fine.
Snap judgement - it's not as fast as Qtek's Rom. Just feels a bit "off". Maybe it's just me.
Loccy, the widget are buggy you sure you have ported the version 1.2 not the version 1.1 ? In version 1.2 the widget are fixed
edit : The widget have no border, but the rom is really fast probably the fastest rom i have tested !!!!
setenza01 said:
Loccy, the widget are buggy you sure you have ported the version 1.2 not the version 1.1 ? In version 1.2 the widget are fixed
edit : The widget have no border
Click to expand...
Click to collapse
Am pretty sure I called 1.2 the right filename but I was drowning in roms by the end so it is possible I got them mixed up. Can't check until I get home now though.
Either way I'm not too impressed - more bugs than Qtek and it is eating battery (although I have been hammerring the phone more or less constantly over the few hours I've been out). I think when I get home I'm going to build the final JacHeroski Rom and see how that goes, I believe that has Compcache running.
Dazcox, how are you finding this Rom? You've been running it longer than me.
Actually I've been using QTek today... but about to install this one will let you know
setenza01 said:
edit : The widget have no border, but the rom is really fast probably the fastest rom i have tested !!!!
Click to expand...
Click to collapse
Really? It's not a patch on Qtek for me. How fast's your SD card?
Am just downloading the final release of JacHeroSki - v2.7.4r2 - and will give that a try. I wonder if some of these new releases are a little too bleeding edge to be useful. If a worthwhile update.zip for the 32B emerges I'll post it here.
dazcox5181 said:
Actually I've been using QTek today... but about to install this one will let you know
Click to expand...
Click to collapse
I thought you'd done your own boot.img hacking and were running this already..?
I have a 8Gb class 6 sdcard and it's really fast more than the qtek rom
The 2.7.4r2 good idea, you make the port today ?
Loccy said:
Really? It's not a patch on Qtek for me. How fast's your SD card?
Am just downloading the final release of JacHeroSki - v2.7.4r2 - and will give that a try. I wonder if some of these new releases are a little too bleeding edge to be useful. If a worthwhile update.zip for the 32B emerges I'll post it here.
I thought you'd done your own boot.img hacking and were running this already..?
Click to expand...
Click to collapse
now I am, tried all the other builds myself
setenza01 said:
I have a 8Gb class 6 sdcard and it's really fast more than the qtek rom
Click to expand...
Click to collapse
Ah. I have the stock 2Gb Vodafone pile of ****e (plus an "8Gb class 6" that I bought from ebay that causes a reboot loop on my Magic ). That'd probably be the problem for me.
Right chaps, here's another one for you. This is JacHeroSki version 2.7.4 r2. Someone else here has done JacHeroSki previously*, but I don't think they ever updated to the final release. It's a little behind the curve in that JAC seems to have gone on to work with Dizzy, and in a different direction, and it won't see any more development. It has working Compcache, but lacks the fancy config scripts of later builds. If you want to play with your Compcache settings, you need to edit the a2sd script in /system/bin. No conventional swap or facility for one. I'd say this is pretty much where Qtek was trying to go with his Compcache ROM though:
http://www.4shared.com/file/123729537/191c816a/jacxhero10-pn-magic.html
Am not sure I'm going to stick with this, however. I've just seen in the thread on the Dream forum that you can get Compcache working in JacXHero 1.2 by nabbing the boot.img from 1.0, so I'll give that a go too. What I'd really like is a working ROM with Compcache and swap as a backup.
edit: * speak of the devil, it's just turned up on the front page of the threads, they did do the final release, but it was for 32A not 32B. Oh, and am very disappointed to find no multitouch in the browser.
Does texting work fine on this ROM?
bhav007 said:
Does texting work fine on this ROM?
Click to expand...
Click to collapse
Honest answer? I don't know. I got a couple of text earlier when running JACxHERO 1.2, and I was hammering the browser at the time (if icanhascheezburger.com isn't going to run you out of available memory, I don't know what is). But I think a definitive answer will have to come from people who text more than I. Unfortunately texts seem to be an issue on all Hero ROMs on the G1 and the Magic 32B, because of memory - hence why my goal is to get a build with as much "memory" as possible, even if most of it is swap and compcache sleight of hand.
Loccy said:
Honest answer? I don't know. I got a couple of text earlier when running JACxHERO 1.2, and I was hammering the browser at the time (if icanhascheezburger.com isn't going to run you out of available memory, I don't know what is). But I think a definitive answer will have to come from people who text more than I. Unfortunately texts seem to be an issue on all Hero ROMs on the G1 and the Magic 32B, because of memory - hence why my goal is to get a build with as much "memory" as possible, even if most of it is swap and compcache sleight of hand.
Click to expand...
Click to collapse
Am getting a boot loop after clean flashing this rom, any ideas why?
bhav007 said:
Am getting a boot loop after clean flashing this rom, any ideas why?
Click to expand...
Click to collapse
Which one? I found I had to completely clean off my ext2 partition before it'd run (coming from the Qtek ROM). Well, actually what I did was go into the recovery console and shift everything the Qtek had left in ext2 into another directory so that this ROM didn't get confused by it
bhav007 said:
Am getting a boot loop after clean flashing this rom, any ideas why?
Click to expand...
Click to collapse
If you were coming from Qtek's Rom, like I did, It does boot loop unless you clean your ext partition first, then wipe and reinstall the rom. It runs like a champ.
to erase the ext: boot into recovery
then from adb shell : run
mount -o rw /dev/block/mmcblk0p2 /system/sd
rm -rf /system/sd/*
then do whats stated above and no boot loop anymore.
PS: Loccy thx for the port.
PPS: to get this working with compcache instructions are in the first post of the dream rom
r1tman said:
If you were coming from Qtek's Rom, like I did, It does boot loop unless you clean your ext partition first, then wipe and reinstall the rom. It runs like a champ.
to erase the ext: boot into recovery
then from adb shell : run
mount -o rw /dev/block/mmcblk0p2 /system/sd
rm -rf /system/sd/*
then do whats stated above and no boot loop anymore.
PS: Loccy thx for the port.
PPS: to get this working with compcache instructions are in the first post of the dream rom
Click to expand...
Click to collapse
Am abit new with the terminologies here . Is there a guide I can follow to do the clean wipe. If i reformat my SD card to the necesarry partitions, it should work?
bhav007 said:
Am abit new with the terminologies here . Is there a guide I can follow to do the clean wipe. If i reformat my SD card to the necesarry partitions, it should work?
Click to expand...
Click to collapse
Should do, if you use the partitioning option on the recovery image, that'll wipe everything.
r1tman said:
PS: Loccy thx for the port.
Click to expand...
Click to collapse
De nada. All I did was just change a few files.
I'm done for the night now people. I did try to get 1.2 running with 1.0's boot.img, but ended up with a ROM that had no working wifi and no apparent Compcache. I figured that wasn't any better than 1.0 proper (which I'm going to give another crack and see if I can tidy up the Compcache settings to my satisfaction - I can live without wifi for now).
Related
If my title really needs a slogan to get your attention, then I just didn't make a big enough impression last time
Donations accepted / appreciated. All proceeds will go toward the cost of the myTouch and future accessories for development.
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=8141983
How I rooted a brand new "perfected SPL" MT3G and installed Hero in 15 min:
http://forum.xda-developers.com/showpost.php?p=4471578&postcount=154
Most Recent:
G1 / MT3G: http://twistedumbrella.slackdev.com/ZeroSx-6.21s.zip
MD5: a04acee7df4e859bd2012954e1ec5447
Motorolla Blur: http://twistedumbrella.slackdev.com/MotoBlur-1.2.zip
This is an untested update, works in theory...
Sapphire Fixes: http://twistedumbrella.slackdev.com/Deport-1.1.zip
Removed Apps: http://twistedumbrella.slackdev.com/Extended.zip
Extended Apps: http://twistedumbrella.slackdev.com/Incremental.zip
Back your apps up as an update in case you do a wipe using this:
Download Incremental.zip above. Back all the apps up you want.
Open the archive and replace the apps in the data/app directory.
Sign the archive like a regular update and place in root of SD card.
Flash the update you want. When finished, flash Incremental.zip
Reboot the phone and both the update and apps will be installed.
User.conf file can be found as system/bin/hero.conf on any device.
No command needed for device identification. Faster boot (hopefully).
A reboot is no longer needed to use either device. This is all integrated.
Recommended not to overclock below 256, due to the black screen issue.
Compcache is enabled by default, current values were EXTENSIVELY tested.
Please do not contact me asking what values work or giving me others.
I spent 2 weeks changing values, testing, changing, testing. Both devices.
Abreviated Changelog, Full Changelog linked below:
Optimized the entire system app folder using the automated method.
Changed some animations. A lot of new stuff in use from Cyanogen.
This is a very unthemed build. The lock screen and such are generic.
The boot animation is customized and will not port to other builds.
http://forum.xda-developers.com/showpost.php?p=4758619&postcount=960
So much to do so little time, I do feel like the "white rabbit"
Now includes dynamic swap. Rewrote the method of apps to sd for myTouch.
Build will move system apps, user apps, and dalvik to sd on a g1 device.
Build will install completely internal if using the T-Mobile myTouch.
This is a completely new method of doing a merge build so bear with me.
Based on the System Image from Haykuro
Using the Kernel and modules from JacSki
Try rm system/sd/app_s if you feel new apps are not installing.
http://twistedumbrella.googlepages.com/index.htm
All the necessary files can be found there, including my GScripts.
This is also where all the download links to NEW versions are posted
Housekeeping:
Back everything up. This means run some sort of data backup if you want to keep your settings
You may also want to run a nandroid backup in recovery (if all else fails, you can restore it)
Warnings:
You MUST have the newest SPL
You MUST have a Class 6 SD Card
You MUST know how to read
You MUST have 3 partitions
You MUST have at least 256MB EXT
You MUST have Recovery1.4 or above
G1 / MT3G: http://twistedumbrella.slackdev.com/Zero9x-6.18b.zip
MD5: e253ffd6d19aa04e7a75d0ede4a487e1
G1 / MT3G: http://twistedumbrella.slackdev.com/ZeroXd-6.14r3.zip
MD5: Currently Unknown
G1 / MT3G: http://twistedumbrella.slackdev.com/ZeroXd-6.13.zip
MD5: e908408b424835cea75f4f539514fccd
G1 / MT3G: http://twistedumbrella.slackdev.com/ZeroXd-6.12.zip
MD5: 321f92f4e1219979674c5ec85ac1b811
G1 / MT3G: http://twistedumbrella.slackdev.com/ZeroXd-6.11.zip
MD5: 28c474b6ac9d636e5d02f0c18fa3dd13
G1 / MT3G: http://twistedumbrella.slackdev.com/ZeroXd-6.10.zip
MD5: b24c387ec7483acf04f12589aecd09c0
G1 / MT3G: http://twistedumbrella.slackdev.com/ZeroXd-5.2r5.zip
MD5: Currently Unknown
G1 / MT3G: http://twistedumbrella.slackdev.com/ZeroXd-5.2r2.zip
MD5: b8165fe91d777b010db054cbfeb433ae
G1 / MT3G: http://twistedumbrella.slackdev.com/ZeroXd-5.1r2.zip
MD5: 0d10525b55ed6c97b7741a70aa113cdb
http://twistedumbrella.slackdev.com/ZeroXd-5.0r2.zip
MD5: 82a72392e78044ed165448949b9ddfbb
http://twistedumbrella.slackdev.com/ZeroXd-4.5r6.zip
MD5: f1e119e936fb4749f642a69780b4a1c9
http://twistedumbrella.slackdev.com/Resources.zip
Despite what you may have heard, I use SetCPU also.
you can have this spot back hehe
palosjr said:
any screenies coming soon?
Click to expand...
Click to collapse
I posted the thread 30 seconds ago... I just hit upload... Sheesh... didn't even have time to get the third slot for the second rom...
mean cant wait for your casper. also is the led lights like jacs 1.4, like how dere dim, and the lights wont show up on charge?
hiroots said:
mean cant wait for your casper. also is the led lights like jacs 1.4, like how dere dim, and the lights wont show up on charge?
Click to expand...
Click to collapse
Yeah, about that... Wonder where he got the idea to piggyback that script into the boot.img userinit? Do you know? I might... Check ZeroXd...
wow he got it from u or stole it? and published it first?
twistedumbrella said:
Yeah, about that... Wonder where he got the idea to piggyback that script into the boot.img userinit? Do you know? I might... Check ZeroXd...
Click to expand...
Click to collapse
not too many ppl very fond of the new things this JAC's build and the way he is acting about them... tsk tsk... all i can say lol
ummm i think the download links are broken... EDIT- nvm just saw uploading in progress lol
hiroots said:
wow he got it from u or stole it? and published it first?
Click to expand...
Click to collapse
He most likely got the idea on his own. I just think since ZeroXd didn't get any real response he didn't notice it had LED support about a week before the 1.3 refresh was even posted. Ask the kids on twitter about back when I came up with the looney idea and how it killed auto-rotate. I threw in an old version of the codes before someone asked if I had seen the thread. I was still using ones ported from my GScript from months ago. Haha, whatever makes a better build. I'm glad to see both Drizzy and JAC getting SOME use out of something I had a part in. Hell, Shafty figured out the commands, I just got lucky figuring out where to place them.
wow, this is kinda when jac and drizzy was working together and it seemed like jac took all the credit in the built. well thats good we still got devs that supprt each other and not use ones idea and run away with it.
I love this black is a nice color! good **** twisted!
Drizzy Drake Rogers said:
I love this black is a nice color! good **** twisted!
Click to expand...
Click to collapse
Thanks man. I was telling you before, all about the INVERT. Haha. Make it all black, hit invert, all white. Kinda had to go a bit grey though for visibility. I would have left Champion the way it is but I couldn't help it when I figured out that boot animation trick. Anyway, both downloads are live.
Im running it, it seems to run very nice its real smooth think this might be my main rom, Nice work mate.
Sorry to be the first one to post that I cant get past the Hero boot. I wiped, then "rm" my ext4, then wiped again, then applied rom, 3 times now. but all get stick in hero boot. btw its the casper one.
futango said:
Sorry to be the first one to post that I cant get past the Hero boot. I wiped, then "rm" my ext4, then wiped again, then applied rom, 3 times now. but all get stick in hero boot. btw its the casper one.
Click to expand...
Click to collapse
you still need a third partition...
palosjr said:
you still need a third partition...
Click to expand...
Click to collapse
Got 3, 7.2GB Fat32, 400MB Ext4, 32MB Linux Swap
Thanks Twisted, the boot screen is a work of art!
futango said:
Got 3, 7.2GB Fat32, 400MB Ext4, 32MB Linux Swap
Click to expand...
Click to collapse
are you sure? if you did rm to ext4, you removed the partition... did you go into gparted and do print
palosjr said:
are you sure? if you did rm to ext4, you removed the partition... did you go into gparted and do print
Click to expand...
Click to collapse
my bad for not being clear. I did.
mount -o rw /dev/block/mmcblk0p2 /system/sd
rm -rf /system/sd/*
to clear the ext4 from recovery console.
WARNING:You must Have The Correct Radio and Latest SPL! You can find them here (RADIO MUST BE INSTALLED FIRST) You can find it here
PLEASE DO YOUR RESEARCH BEFORE FLASHING ANY ROM INCLUDING MINE IT WILL SAVE YOU AND OTHERS TIME AND HEADACHE!!!
First A big thanks to Haykuro for providing the system dump of the latest known Hero build. Great contributions from Haykuro always!!! Make sure to thank him!!!
This ROM is based off the latest "HTC" ROM leak 2.83.x.x with tons of mods enjoy!!
This is the same as the build posted in the dream section,we just wanted to keep the two threads clean so all MT3G/Sapphire Q: and problems should be posted here. As of now it works only on 32B but 32A kernal is being worked on so will be coming soon give ccyrowski time he is working hard for us.
NOTE: Once you flash before you sign in do the led fix in the instructions,also we recommend using ext3 and a 64MB Linux-swap partition.
JacHEROSki 2.2r4 Remix More Specs Coming!
Fix Video audio
Added lastest tether 1.60
Added Sapphire folder
Added the new LED app By jinx10000
JacHEROSki-v2.2 - Experimental A & B
A
-2.6.29.6-jac-ski [email protected]
-BFS 240
-supports MyTouch out of the box!
-MT
-various ramconsole and usb patches
-other things I can't think of
B
-same as A with the 10MB RAM hack (10 extra MB of RAM)
-other things I can't think of
Install Instructions​
First using adb I remove the ext3 and linux swap if you have them set already like this, remember the numbers will vary with the size of you card but I will show mine as an example.
In Recovery
This Removes the partitions
adb shell
parted /dev/block/mmcblk0
rm 2
rm 3
This makes the partitions ext2 and linux-swap 64MB remember numbers vary according to the size of your S.D if your not sure ask first.
mkpartfs primary ext2 3767 3901
mkpartfs primary linux-swap 3901 3965
This upgrades the ext2 to ext3
quit
upgrade_fs /dev/block/mmcblk0p2
Now with the build on your S.D
Wipe
Flash the build A or B
Now once the build loads up you may get a FC on HeroLED.apk which there is a fix that I know of for MyTouch but cant be done because the sapphire folder is not in the build and not needed the HeroLED.apk is not needed since they work without it.
Phone on as normal
Fixing the HeroLED.apk
Fix the FC on HeroLED.apk and also get your phone to read as a Magic/MT3G.
Terminal
su
rwsystem
magic
reboot
Click to expand...
Click to collapse
This is how I install my builds and have it running as smooth as I do if your not sure you can do all this don't try. I do it and my phone runs sweet, but I will not take blame for people messing up there phones because they don't know what there doing.
JacHEROSki 2.2r4 Remix: http://www.4shared.com/file/136918974/b6e7bf4c/jacheroski22r4_Remix.html
JACxHEROSki-v2.2a: http://www.justanotherdev.slackdev.com/jacheroski2.2a.zip
JACxHEROSki-v2.2b: http://www.justanotherdev.slackdev.com/jacheroski2.2b.zip
Good **** thanks manup. Will you be adding BFS-300 to this tonight?
Omg...cant wait for 32a version ....STILL !!!!!
rebooting with new remix rom
I am getting frequent reboots ( about every 30 minutes) and also am getting a force close due to leds any ideas?
oops
I found the fix for the led force close. any idea on the rebooting?
Well the rebooting I have not seen on these ROMS really I would reflash again and let me know if still keeps happening,also are you using the remix or what version?
@jabbawalkee
I will maybe drop tonight not sure its up to cc but the BFS-300 will have the 10MB hack for MT3G/Magic for those who dont know that. I know you do but some are waiting so I tossed that info in there.
@Daneshm90
I know bro I am working on getting that for you hopefully today but cc is a bit under the weather so we will see.
manup456 said:
Well the rebooting I have not seen on these ROMS really I would reflash again and let me know if still keeps happening,also are you using the remix or what version?
@jabbawalkee
I will maybe drop tonight not sure its up to cc but the BFS-300 will have the 10MB hack for MT3G/Magic for those who dont know that. I know you do but some are waiting so I tossed that info in there.
@Daneshm90
I know bro I am working on getting that for you hopefully today but cc is a bit under the weather so we will see.
Click to expand...
Click to collapse
Thanks man. I have 300, but wasn't working too well when I flashed it as an update over A...may try deleting/recreating my partitions and re-trying it.
Not sure bro I have been using it since yesterday on a fresh fromat and install and its been really good for me so yeah I would def give a fresh format and install.
manup456 said:
Not sure bro I have been using it since yesterday on a fresh fromat and install and its been really good for me so yeah I would def give a fresh format and install.
Click to expand...
Click to collapse
Are you using it on A or B?
No I use a whole ROM with it built off of 2.2r4 thats what I thought you had P.M me to see what it is your using.
manup456 said:
No I use a whole ROM with it built off of 2.2r4 thats what I thought you had P.M me to see what it is your using.
Click to expand...
Click to collapse
Check your box
Great work.
After seeing that Tweet from last night. I'm glad to see this up-and-running this afternoon.
About time the "official" build finds a home in the Sapphire Development Section.
Oh, and thanks for the hard work put in last night. I was working like a dog, testing for CC last night on that BFS-300 patch. Lol.
(not that it was "hard" work or anything.)
Glad to see you in this section though.
No prob I will be around in both sectitions because I have both G1 and the MT3G,I wanted it to not be so mixed in the dream thread people seemed to get confused there will be a update either today or tommarrow that will be real nice.
I am helping as much as I can but cc is killing it with all his new work and mods mike's user.conf is also amazing.
manup456 said:
No prob I will be around in both sectitions because I have both G1 and the MT3G,I wanted it to not be so mixed in the dream thread people seemed to get confused there will be a update either today or tommarrow that will be real nice.
I am helping as much as I can but cc is killing it with all his new work and mods mike's user.conf is also amazing.
Click to expand...
Click to collapse
Take your time tonight.
You might as well drop tomorrow, just give everything a chance to settle today.
People are hyped enough on the BFS-300 high. Lol. No need to cause a global overdose.
I'm eager to see this user.conf you speak of. Some sweet-ass options within I hope! As for the G1 and MyTouch, same here. But, I have three MT3G devices. (employee of; you guessed it.) Anyway, if you need a tester later tonight or whatev.
TWEET ME!
US MT3G w/2.2a problems
First, I have an 8GB SD card, with the standard partition sizes (7GB FAT32, 32MB Linux-Swap, and the rest Ext3)
I am using Cyanogen 1.4, and I did a wipe, and check of my ext before updating. The SD card was empty on all partitions, except the 2.2a named as update.zip
First thing I saw on startup (and every startup) is the LED notify crash, but more serious is the phone being stuck in headset mode. Tried rebooting, plugging in charger, plugging in actual headset, but it was just stuck on.
I ended up flashing back to my stock tmobile 1.5 firmware until it's more stable.
My knowledge of this device is a bit limited at this point. I know I am running the latest radio, but I am not clear on what SPL is (or ADP for that matter).
Can anyone help fill in the blanks or tell me what I am doing wrong?
tia,
-dana
I said in the first post that swap is better at 64MB and there is instructions in the first post that talks all about the FC on HeroLED all you need to do is hit o.k and follow the steps posted. Also coming from another wipe a format of the ext3 should have been done read the first post.
Does everyone have the auto-backlight option?
Same issues...
manup456 said:
I said in the first post that swap is better at 64MB and there is instructions in the first post that talks all about the FC on HeroLED all you need to do is hit o.k and follow the steps posted. Also coming from another wipe a format of the ext3 should have been done read the first post.
Click to expand...
Click to collapse
Thanks for pointing that out, I now see the instructions that I did not notice before.
I used Ubuntu to delete my partitions, and re-do them with the sizes stated in the instructions, so the partitions are clean. I then copied the update.zip (22a) to the card, and put it in the phone. Started Cyanogen, wiped, repaired ext partition, and installed the update.zip
I still have the headset indicator stuck on.
Went into terminal, but could not get a keyboard to come up. I used "better terminal emulator" instead, which should work. I followed the steps, but when I got to "magic", it came back with "rm failed for system/bin/sapphire, no such file or directory"
I still have the LED FC at startup, and am still stuck in headset mode.
Any ideas?
tia, again,
-dana
dleasman said:
Thanks for pointing that out, I now see the instructions that I did not notice before.
I used Ubuntu to delete my partitions, and re-do them with the sizes stated in the instructions, so the partitions are clean. I then copied the update.zip (22a) to the card, and put it in the phone. Started Cyanogen, wiped, repaired ext partition, and installed the update.zip
I still have the headset indicator stuck on.
Went into terminal, but could not get a keyboard to come up. I used "better terminal emulator" instead, which should work. I followed the steps, but when I got to "magic", it came back with "rm failed for system/bin/sapphire, no such file or directory"
I still have the LED FC at startup, and am still stuck in headset mode.
Any ideas?
tia, again,
-dana
Click to expand...
Click to collapse
Get 2.2r4, not 2.2a
manup456 said:
Does everyone have the auto-backlight option?
Click to expand...
Click to collapse
No auto-backlight option after installing 2.2r4 and running the magic script.
This is Android 1.6 (donut) release for ADP1, rooted and modified
Current version
HTML:
3.0
- updated frameworks and apks from official framework and SDK.
- Supported languages: Czech, German, English, Spanish, French, Italian, Japanese, Korean, Dutch, Polish, Russian
- added some parts of text to speech and accessibility
- Full package update (no wipe required)
I suggest to cleanup /system/sd/dalvik-cache (might work without, but it's better to do that).
http://ftp.wsisiz.edu.pl/pub/G1/android1.6-akirah.3.0.zip
Past versions
HTML:
2.1 - upgraded kernel to 2.6.29.6-bfs300-mkk2
see 2.0
2.0 - apps2sd
cm kernel 2.6.29 from 4.1.11.1
all donut goodies
compcache enabled by default
terminal, pdfreader, htc ime, and few things that I've forget to mention
What it requires:
HTML:
root
Radio 2.22.19_26I
Sdcard with FAT32/EXT2 or EXT3 or EXT4/
Recovery image that can flash ROMS not signed with release-keys
Installation
HTML:
Backup
Wipe
* You might need to format your linux partition
Flash
Downloads
ANDROID1.6 Akirah.3.0
Upgrade from 2.0 to 2.1
ANDROID1.6 Akirah.2.1
ANDROID1.6 Akirah.2.0
Click to expand...
Click to collapse
Themes
Minus theme by david1171 for v.2x
Blur theme by Brandenk - for v2.x
Click to expand...
Click to collapse
Theme template by david1171
Click to expand...
Click to collapse
Thanks for that. It looks good.
Q: Is there a way to remove app2sd?
3.0 for some reason doesn't work. It keeps telling me no data connection. 2.0 and now 2.1 do work however. Any ideas?
excellent ROM,
been from 2.0 upto 2.1 and now 3.0
only thing is that i don't see "secondary SD memory" in settings?
formated using SDParted script Swap=32Mb, EXT4=512Mb, rest FAT32 (8Gb class 6)
Internal Phone Storage stays 280~290Mb, so i presume Apps2SD is working ?
cheers
DT
Magic 32B (originally Vodafone UK, now AKIRAH 3.0 in Jakarta)
i hope someone can port to 32A for us...
very simple ROM but with some nice goodies. Keeps it simple and efficient.
Question, w/ compcache enabled at start, should I customize my own userconf / unserinit.sh to set swap size, and whether to use linux or backing swap?
What are the default settings?
Default is just 24Meg of compcache. Of course you can put user.conf and userinit.sh on /system/sd and it will take values from there.
hi, i have a problem: i did wipe and i flashed this ROM from recovery, but the boot stops at the screen "android"...
i had a 4.0.4 cyanogen with 3 partitions: fat32, ext2 and swap...
how can i solve this problem?
thanks
question about micro (magic 32B)
Hello,
first of all, thanks for your work, and all your current updates.
Second, I have not tried what I am going to ask, but anyway here it is.
Since Cyanogen found out the way to create "dual" roms for the dream and magic everyone has been doing them that way, but in all of them I have always had problems with the microphone sensitivity when in a call.
There is a little fix (pushing the audio files from an original 32B to the rom), wich works perfectly.
Now the question: Is this the normal procedure? no one has noticed this error before? can this still be done in Donut (I think the location of the files is the same)? Is this just a problem only I am having?
(ok, maybe more than one question )
The fix refered is the following:
adb push AudioPreProcess.csv /system/etc
adb push AudioPara4.csv /system/etc
adb push AudioFilter.csv /system/etc
Thanks for all
Is there any way of getting the Hero email client working in Donut?? Mass delete functions are seriously needed on my device.
cheers
leigh
bunglehaze said:
Is there any way of getting the Hero email client working in Donut?? Mass delete functions are seriously needed on my device.
cheers
leigh
Click to expand...
Click to collapse
Would be great to have whole SENSE UI on Donut Small question ADP1 means ? I`m using MAgic 32A ... Would it be compatible ? I`m newbie with Android... Thanks for reply
To be honest I am not really that bothered with the senseUI having played with pretty much all the hero builds, speed and stability is more important to me but androids inbuilt email client is about the worst one I have ever tried, the hero version is slightly more usable though.
I am surprised that there are not more email client apps in the market, all I can find on there is k9.
Also while I am here, will the blur theme work on 3.0?? I quite liked that one and it has been overwritten.
leigh
To be honest I am not really that bothered with the senseUI having played with pretty much all the hero builds, speed and stability is more important to me but androids inbuilt email client is about the worst one I have ever tried, the hero version is slightly more usable though.
I am surprised that there are not more email client apps in the market, all I can find on there is k9.
Also while I am here, will the blur theme work on 3.0?? I quite liked that one and it has been overwritten.
leigh
NguyenHuu said:
i hope someone can port to 32A for us...
Click to expand...
Click to collapse
Krzysiec said:
Would be great to have whole SENSE UI on Donut Small question ADP1 means ? I`m using MAgic 32A ... Would it be compatible ? I`m newbie with Android... Thanks for reply
Click to expand...
Click to collapse
For 32A users:
I haven't tested this yet, but if someone wants to give this a try, it should work.
Download: http://briancrook.ca/magic/akirah-3.0-32a-port-signed.zip
md5: 4f431ae885633518e0ee804470125ef8
Push this and the full ROM from the front page to your sdcard. Reboot into a recovery that allows you to flash a .zip that isn't only named "update.zip" (like Amon_RAs RAv1.2.1). Apply the ROM from the first page, them apply this patch. It will change the kernel to a 32A compliant one with BFS 300 (thanks to Radix999 for keeping on top of the BFS/kernel situation).
veneirt said:
hi, i have a problem: i did wipe and i flashed this ROM from recovery, but the boot stops at the screen "android"...
i had a 4.0.4 cyanogen with 3 partitions: fat32, ext2 and swap...
how can i solve this problem?
thanks
Click to expand...
Click to collapse
Whenever you go from Cupcake to a Donut to a Hero ROM or visa versa you have to wipe your ext3 partition as well or it boot loops. The easiest way to do this is to upgrade to Amon_RA's recovery and it gives you the option without having to go into console.
So wipe the phone, wipe the ext3 and repair ext partition, then flash the ROM.
Amon RA's Recovery
I know the recovery says Dream but I have it on my 32B with no issues, as well as several other people.
Anyone know if MyFaves works with this? I don't want to install it then have it FC.
up and running since 8 AM with only a single issue, but I think thats BFS300 related bc I experienced the same issues on the hero builds using it.
edited user-conf so Im running 192 MB backing swap, 80 swappiness, and 100% good compress.
Only thing I want now is a dark theme, but seeing how stable and reliable this build it, its only a matter of time before it picks up the momentum to attract theme makers.
am i correct in sayin this is better than cyanogens recovery image and will work with all the same things as cyanogens recovery does ??
UpGrad3 said:
am i correct in sayin this is better than cyanogens recovery image and will work with all the same things as cyanogens recovery does ??
Click to expand...
Click to collapse
you are confused. this is a rom not a recovery image. did you post in the wrong thread or something?
Beautiful rom, but I've some problems:
- gps starts, but never give me my position.
- the bar on the top of the screen (the bar that contains notification, icons, clock...) suddenly disappeared
thank you (and excuse me form my bad English )
I would suggest doing a Nandroid backup - just in case
Download: http://www.mediafire.com/?umznkzjtgdz
Someone mentioned a bug for a couple app crashes
All right, screw it. I am going to remove the CM stuff and just push the nav/fb, ram hack, etc as just an incremental update
To-Do:
Music.apk - Rewrite to ignore music less than 30sec long (aka voicemails)
BFS 310 Kernel with 10mb RAM hack (BFS 310 hasn't been tested by anyone else yet, why not try)
Add Fix_Permissions v2.03 (running the default 1.31 right now)
ZipAlign all apps (including Google apps)
[Suggest more!]
Converting from Cliq/Hero/1.5 - see below for instructions
Need Google Apps - see below for instructions
Includes:
10mb hack - working on adding bfs310 (seriously if you can help PLEASE DO)
Google Navigation works
Facebook included
Includes HTC IME
Clears cache of old files
Installs RA Recovery
MANY MANY TWEAKS
Adjusted a2sd (mt3g: one time copy from /system/sd to data for apps)
Note: this discontinues A2SD from then on for better performance after apps have been copied, am making script to copy back to SD
For fastest possible speed: have a swap partition on your SD card
The ROM will load a2sd for G1's
If you don't have /system/sd (and just swap partition), it will swapon to that
Trick is it utilises both Cyanogen's compcache plus the swap
Then with 10mb hack - hell this is a perfectly fast ROM
See at the bottom if you need Google Apps (starting on clean build or converting from any 1.5 ROM (Hero/Cliq) OR if you are starting with a blank phone lol (aka no system partition at all))
Hero/Cliq/1.5: Yyou will have to run the thing at the bottom for your phone to convert to 1.6 Donut - run that first, then run main zip).. if you still have probs see the bottom of this post
If you are switching from Hero or Cliq see the bottom
This rom does NOT include Google Apps
Install this first for Google Apps:
http://www.mediafire.com/?z3ozzmyzrad
If coming from Hero/Cliq
Run recovery mode
Hit console
Type these commands:
mount /data
cd /data/data
rm -r com.google.*
rm -r com.htc.*
rm -r com.android.*
Thanks to Cyanogen, Maxisma(for my base on a2sd), daproy (RAM hack),
Amon_RA (recovery image)
For help:
Search on Wave for the title of this post
Follow me on Twitter @wesgarner
wesgarner said:
Trick is it utilises both Cyanogen's compcache plus the swap for a very FAST build
Click to expand...
Click to collapse
I remember reading somewhere that this will lead to problems, and should not be done. From my understanding you should use one or the other, not both.
(otherwise wouldn't we see alot more Devs using that trick?)
can a no wipe update be done from cm 4.2.5?
Thanks for you~
hey guys Good work
Only thing ive ever had come out of the 10mb hack was random reboots, random ringtones. phone ringing when noone was calling. crashing getting texts...
But thanks for the effort lol
Didn't work. Caused me to get stuck on G1 boot screen for an hour. Then totally wiped and again sat there on the G1 boot screen. What is odd is that for some reason my recovery image disappeared and went to JF 1.42 so I couldn't even use recovery. Now I am trying to get my phone back to the way it was.
Fortunately, I still had all the files I needed on my SD card to get me back to where I was. i reinstalled the recovery image and then was able to load my recovery image again. How it got to JF 1.42 (which hasn't been on the phone is many months) is beyond me. I have been doing phone mods for many years and this is the first one that didn't work out.
So, no go?
Unexpected end of Archive......
I tried to do the same thing (cm 2.4.5 + ramhack + swap) but got nowhere, system became sluggish. This should work very well in theory (this should be fast as dwang but with all cm goodies) but I haven't been able to make it work so I'm following this thread and see how it works.
pascanu said:
I tried to do the same thing (cm 2.4.5 + ramhack + swap) but got nowhere, system became sluggish. This should work very well in theory (this should be fast as dwang but with all cm goodies) but I haven't been able to make it work so I'm following this thread and see how it works.
Click to expand...
Click to collapse
i used to run CM 2.4.x with ramhack and swap no problem, but since 2.4.5 the ramhack slowed my system down so much i just decided it would be better to go without it
btmec said:
Didn't work. Caused me to get stuck on G1 boot screen for an hour. Then totally wiped and again sat there on the G1 boot screen. What is odd is that for some reason my recovery image disappeared and went to JF 1.42 so I couldn't even use recovery. Now I am trying to get my phone back to the way it was.
Fortunately, I still had all the files I needed on my SD card to get me back to where I was. i reinstalled the recovery image and then was able to load my recovery image again. How it got to JF 1.42 (which hasn't been on the phone is many months) is beyond me. I have been doing phone mods for many years and this is the first one that didn't work out.
Click to expand...
Click to collapse
Looking into the G1 bug now, did you get a logcat?
Going to try to test on my old G1 in a few, if you have Wave get on there if you want to help debug
sacredsoul said:
can a no wipe update be done from cm 4.2.5?
Click to expand...
Click to collapse
Yup no wipe
no work.
Did not work ... G1 stays in boot screen and reboot ...
Takenover83 said:
I remember reading somewhere that this will lead to problems, and should not be done. From my understanding you should use one or the other, not both.
(otherwise wouldn't we see alot more Devs using that trick?)
Click to expand...
Click to collapse
Well with the newer compcache modules, it doesn't seem to cause any problems
grafyman said:
Did not work ... G1 stays in boot screen and reboot ...
Click to expand...
Click to collapse
Yea I am about to test on my G1 to look around for the bug - my main phone is my myTouch so I didn't test before I posted LOL - my bad on that (it is just in this recent version since worked fine on a friend's G1 before this post)
If you have wave, could you get on there if you want to help debug?
If you have a logcat, just post it here or on pastebin and shoot me the link on Twitter (@wesgarner)
One big thing I am trying to work on here is going through and doing some things Cyanogen couldn't do
Next version I am going to do zipalign on the Google Apps to post that (on a sep update zip for people who prefer to stay legal, hope I don't get a D&S - don't think anyone else has)
I am thinking about doing a choose your kernel like Cyrowski did here - good idea?
Please give any suggestions, this just seems a good way to do some playing around and experimenting that is a project by everybody - developers and users
Also, next project: Write a test into Music.apk to ignore files less than 30sec (I have my voicemails through Visual Voicemail and Google Voice)
It is annoying as crap! Going to get the GIT for Music.apk later today
Can someone mirror this or create a torrent? media fire is so slow today
Ok im seeding but warning if you go from 4.2.5 like me you may get a boot loop like i am right now good thing i backed up
Torrent link: http://bit.ly/blah234
guys this rom is ****. i flashed a number of times, then i wiped all partitions and tried again. dosent work just g1 boot loops, im going to stop seeding. dont trust this guy this rom is bad
LOL, dude, why are people keep thinking any Rom based on the same rom works better? Wake up people. If you use Cyanogen, use Cyanogen, If you use Dwang, use Dwang. any other so call hack does not make it better. Wake up, wake Up. Wake Up. LOL.
I have been using the so call Ram hack, it does NOT make it better after long hour of usage. It slows it down. At least on my G1. I reverted back to Stock boot img, it just WORKS.
Hey all, this is a patch that will change out the kernel for King's SenseHybrid 2.3. I use this rom pretty much daily. It is a cupcake based hero, just this update speeds up the performance a bit.
Instructions:
-Wipe everything!
-Install King's 2.3 SenseHybrid (Please follow his directions.)
http://forum.xda-developers.com/showthread.php?t=563294&highlight=SenseHybrid
- Flash this update immediately after flashing King's rom
- Reboot and enjoy!
ChangeLog:
Updates user.conf (if you don't like it, change it )
Virtual mem settings adjusted
proc_cpu_en=0 # to save battery life
Updates Kernel to CM 4.2.15.1
Removes:
Meebo
HeroLED
AKNotepad
teeter
Adds:
Free Advanced Task Manager (Useful)
****I just posted a 10MB ram hack version in the thread below. It uses CM 4.2.14.1 with CFS instead.****
If you like it, then great! I've been experimenting with using different kernels on different people's roms. I'm new to it, but if anyone has any tips, they are greatly appreciated.
Red.
PS. PLEASE DO NOT ASK ABOUT BT! IF YOU HAVE READ ANYTHING ON THIS SITE CONCERNING HERO ROMS ON A G1/DREAM THEN YOU WOULD KNOW BETTER AND WOULDN'T RISK BEING FLAMED.
Sounds good I was going to flash the sensehybrid soon anyways so this sounds perfect.
Wait a few minutes..
If you can hold off a bit, I am also making a 10MB ram hack version with CM 4.2.14.1 CFS. Just testing now.
Red.
CM 4.2.14.1 10MB Ram Hack with CFS
Here is another one that you can flash immediately after flashing king's 2.3. This uses the 4.2.14.1 CM kernel and the CFS 10MB ram hack. I absolutely hate BFS on G1/Dreams! Anyways, this one should run faster. I would also look into the thread that has been posted recently about speeding up hero roms and change the line in your init.rc to keep rosie in memory. just copy the init.rc onto your sdcard and edit it with notepad++ (windows program, it is great!) and then copy it back to your root over the existing init.rc and reboot. (if this is complicated, then don't try it.)
Otherwise, Enjoy!!
will this work without an ext/swap partition?
Without ext partition...
Honestly, if you are using the Death SPL and you are running this with my ram hack, you should be ok. Unfortunately, the compcache on King's earlier roms are usually broken. I tried pushing ramzswap from the CM kernel and still no luck, but then again, I'm not as savy as some of the other dev's out there. You will just have to edit the user.conf after you finish flashing the two, you want to do the following:
First, before flashing you want to pull the user.conf from the system/bin/ directory in king's zip file. edit the user.conf using notepad++ in windows and change the linuxswap=1 to 0 so that it turns it off. then copy that file to your sdcard.
immediately after flashing the two files,
-go to console from the recovery and type the following
mv /sdcard/user.conf /system/bin/
reboot
this will disable the linuxswap and then you will be able to run the rom. But again it would be better with a swap partition.
Hope this helps.
Red.
would prefer the WG kernel but okay thanks
protomanez said:
would prefer the WG kernel but okay thanks
Click to expand...
Click to collapse
Same here, WG is great. I tried the RH CFS patch, but I got an error while flashing it. Had to restore from switchrom.
where's the wg-kernel patch for 1.5 hero roms?
Also, does multitouch still work with THIS patch?
boot loop...
?
Chabsie, telling me u got a boot loop doesn't help me resolve the problem much. You must have DeathSPL for this rom, Must be full wipe, and EXT4 partition. If that doesn't help, please list the stats for your phone, which hack u are using and where your issue occurs.
Jcarrz, WG kernel version of this is released in another thread. It is on 2nd or third page, just search.
Thanks.
Red.
Just a question, since im not an expert. but how is this cupcake based hero, when CM 4.2.15.1 is donut based? Also thanks i will give it a try now.
Snacky-cakes
domex2k said:
Just a question, since im not an expert. but how is this cupcake based hero, when CM 4.2.15.1 is donut based? Also thanks i will give it a try now.
Click to expand...
Click to collapse
HTC developed the sense UI and this port is from the HTC Hero or the earlier Droid Eris (Prior to upcoming update from Verizon to 2.1.) Both of those phones use Cupcake as the base and then Sense UI is just a pretty cover for it. The kernel I used is from CM's Donut based roms, which is more than compatable, but again, the framework and ramdisk and everything else reflects a 1.5 environment. Enjoy the patch.
Red.
redd12345 said:
HTC developed the sense UI and this port is from the HTC Hero or the earlier Droid Eris (Prior to upcoming update from Verizon to 2.1.) Both of those phones use Cupcake as the base and then Sense UI is just a pretty cover for it. The kernel I used is from CM's Donut based roms, which is more than compatable, but again, the framework and ramdisk and everything else reflects a 1.5 environment. Enjoy the patch.
Red.
Click to expand...
Click to collapse
Got it. Thanks
Yeah it runs pretty smooth, the only thing was the contacts from Gmail did not sync, but im going to later on reflash and see what happens.
sync fix
domex2k said:
Got it. Thanks
Yeah it runs pretty smooth, the only thing was the contacts from Gmail did not sync, but im going to later on reflash and see what happens.
Click to expand...
Click to collapse
Just go back into system menu and re-sync manually and give it a minute. It will work fine. I had that happen on one of the trials.
Red.
redd12345 said:
Just go back into system menu and re-sync manually and give it a minute. It will work fine. I had that happen on one of the trials.
Red.
Click to expand...
Click to collapse
Great i will give that i try Thank you
Suggestion
domex2k said:
Great i will give that i try Thank you
Click to expand...
Click to collapse
You may like this one better.
http://forum.xda-developers.com/showthread.php?t=654789
This is the Wes Garner Ramhack. It should be slightly faster. I think that you still need to have a partition though because of the apps to sd. You would have to do complete wipe for this one again.
Red.
redd12345 said:
You may like this one better.
http://forum.xda-developers.com/showthread.php?t=654789
This is the Wes Garner Ramhack. It should be slightly faster. I think that you still need to have a partition though because of the apps to sd. You would have to do complete wipe for this one again.
Red.
Click to expand...
Click to collapse
Thanks for the link. I will give it a try, because some reason when used the other 2 cm patches the camera and camcorder will FC and so i then just flashed this rom solo and it did not fc
multitouch?
redd12345 said:
Chabsie, telling me u got a boot loop doesn't help me resolve the problem much. You must have DeathSPL for this rom, Must be full wipe, and EXT4 partition. If that doesn't help, please list the stats for your phone, which hack u are using and where your issue occurs.
Jcarrz, WG kernel version of this is released in another thread. It is on 2nd or third page, just search.
Thanks.
Red.
Click to expand...
Click to collapse
Sorry for being vague. I had everything right except ext3 instead of ext4. I'm looking for some directions on how to upgrade. If you have any please let me know, thanks.