Hello;I want my phone to enter recovery mode (volume down-camera-power combination) three times before trying to continuous vibration after vibration and gives the following error is coming
osbl versiyon:a4.03.32.01 #0 #0 #0 #0
"sd image download proceduro... failed! image_dir_not_found"
Thank you for your help
Related
need anyone advice and help.. for my problem..
sir, i want ask help.. my gadget samsung gt-p1000 had problems..
it just power on and shut down by itself.. and stuck in samsung logo.. and repeat power on again..
when i'm using recovery boot mode something occure :
the enter key for boot mode should be home key.. but in mine gadget.. become OK key, i can't use my home key to enter...
this condition too :
-- Verfing internal MMC block...
checksum confirmation -> check(1)
the # of partition : 3
part(1) BR_ChkSum in header : 94CE1E2144A86FEE9B8C810A30208A9D
part(1) BR_checksum : 94CE1E2144A86FEE9B8C810A30208A9D
part(1) DATA_Chksum in header : 696EA8F29ECB20C45B97B704AD543871
part(1) DATA checksum : 2184010839EB3D021EED0BB7EC395B51
E: part(1) DATA Checksum Error
E: part(1) Checksum Error
Internal MMC checksum verify failed.
# MANUAL MODE #
-- Updating application...
Successfully updated application.
-- Appling Multi-CSC...
Installing Multi-CSC
Applied the CSC-code 'XSE'.
Successfully updated multi-CSC.
keitagusy said:
need anyone advice and help.. for my problem..
sir, i want ask help.. my gadget samsung gt-p1000 had problems..
it just power on and shut down by itself.. and stuck in samsung logo.. and repeat power on again..
when i'm using recovery boot mode something occure :
the enter key for boot mode should be home key.. but in mine gadget.. become OK key, i can't use my home key to enter...
this condition too :
-- Verfing internal MMC block...
checksum confirmation -> check(1)
the # of partition : 3
part(1) BR_ChkSum in header : 94CE1E2144A86FEE9B8C810A30208A9D
part(1) BR_checksum : 94CE1E2144A86FEE9B8C810A30208A9D
part(1) DATA_Chksum in header : 696EA8F29ECB20C45B97B704AD543871
part(1) DATA checksum : 2184010839EB3D021EED0BB7EC395B51
E: part(1) DATA Checksum Error
E: part(1) Checksum Error
Internal MMC checksum verify failed.
# MANUAL MODE #
-- Updating application...
Successfully updated application.
-- Appling Multi-CSC...
Installing Multi-CSC
Applied the CSC-code 'XSE'.
Successfully updated multi-CSC.
Click to expand...
Click to collapse
I have the same thing! found any solution?
Please help
Hello all ,
I linked a serial cable to my allwinner a20 based Android Tv box.
It can not pass after the boot logo and next is all what it display in serial console.
Somebody pelase help i need to reisntall linux on it ,if you knwo any u boot keys that i have to press on the uboot serial consoel pelase help.I tryed to press ransom keys but i see nothin.
Here is all i see when it start:
====================================
HELLO! BOOT0 is starting!
boot0 version : 3.0.0
dram size =512
sum=0x9c3bd8cf
src_sum=0x9c3bd8cf
Ready to disable icache.
Jump to secend Boot.
[ 0.133]
U-Boot 2011.09-rc1-dirty (Nov 08 2013 - 11:06:32) Allwinner Technology
[ 0.141]version: 1.1.0
[ 0.144]pmbus: ready
axp read error
probe axp20x failed
axp_probe error
boot_clock = 912
dcdc2_vol = 1400
axp set dcdc2_vol to 1400 failed
dcdc3_vol = 1250
ldo2_vol = 3000
ldo3_vol = 2800
ldo4_vol = 2800
power_start = 0
storage_type = -1
usb_recovery = 0
find power_sply to end
fel key old mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
[ 0.293]DRAM: 512 MiB
relocation Offset is: 15b27000
user_gpio config
user_gpio ok
DRV_DISP_Init: opened
[ 0.560]boot_disp.output_type=2
[ 0.563]boot_disp.output_mode=5
[ 0.567]boot_disp.auto_hpd=1
workmode = 0
[ 1.871]NAND: NAND_UbootInit
NB1 : enter NAND_LogicInit
nand : get id_number_ctl from script, 3
not burn nand partition table!
NB1 : nftl num: 3
init nftl: 0
NB1 : NAND_LogicInit ok, result = 0x0
[ 2.381]sunxi flash init ok
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
-total partitions:12-
-name- -start- -size-
bootloader : 1000000 1000000
env : 2000000 1000000
boot : 3000000 1000000
system : 4000000 20000000
recovery : 24000000 2000000
databk : 26000000 2000000
misc : 28000000 1000000
private : 29000000 1000000
sysrecovery : 2a000000 21000000
data : 4b000000 40000000
cache : 8b000000 17000000
UDISK : a2000000 0
-----------------------------------
base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_nand
key 0
recovery key high 6, low 4
cant find fstbt value
Fastboot detected, will boot fastboot
to be run cmd=run setargs_nand boot_fastboot
the user data'magic is bad
WORK_MODE_BOOT
board_status_probe
sunxi_bmp_display
WORK_MODE_BOOT
[ 2.509]Hit any key to stop autoboot: 0
run usb fastboot
sunxi_fastboot_init
recv addr 0x41000000
send addr 0x582580a8
delay time 0
usb init ok
------------------------------------------------------------------
After this nothing .Please help me
After searching all google and reading documantation ,I contacted the box seller and he gied me the files i neeeded.
I used a image file named sun7i_A20v2.0_android_sugar-ref001_2014.09.04_TakenYBSJ.img and a windwos software to flash it via usb named PhoenixPacketV333
To flash teh device you muist hava a serial console to the box (veru easy to do if you have the cable ) ,and keep pushed the key 2
on serial consle (putty) while powering the device ,so it enter in fel mode ( something like recovery mode ,it accept usb connection) .Then oyu need a usb male to male cable to conect the android tv box usb port to the windows usb port ,and start flasing using the PhoenixPacketV333 software.
If somebody needs more help or files just write here I check daily .
have a nice day all!
Not able to do "wipe data/factory reset" and "wipe cache partition" and hence not able to apply stable ROM on sony xperia l after last updating it to android l 5.0.x with Liquid Smooth ROM
This is the recovery log that i get.
While doing factory reset:
"I : Connected to Vold. .
I : 110 0 sdcard0 /storage/sdcard0 2
I : 110 0 sdcard1 /storage/sdcard1 1
I : 200 Volumes listed.
E : Cannot load volume /misc!
E : Cannot load volume /misc!
locale is [en_US]
stage is []
reason is [(null)]
libpng warning: iCCP: Not recognizing known sRGB profile that has been edited
libpng warning: iCCP: Not recognizing known sRGB profile that has been edited
fb0 reports (possibly inaccurate):
vi.bits_per_pixel = 32
vi.red.offset = 24 .length =8"
While applying update
"CYANOGEN RECOVERY
Install failed
E:Cannot load volume /misc!
E:failed to unmount auto
E:failed to set up expected mounts for install; aborting Installation aborted
E:Cannot load volume /misc!"
ShubhamB said:
Not able to do "wipe data/factory reset" and "wipe cache partition" and hence not able to apply stable ROM on sony xperia l after last updating it to android l 5.0.x with Liquid Smooth ROM
This is the recovery log that i get.
While doing factory reset:
"I : Connected to Vold. .
I : 110 0 sdcard0 /storage/sdcard0 2
I : 110 0 sdcard1 /storage/sdcard1 1
I : 200 Volumes listed.
E : Cannot load volume /misc!
E : Cannot load volume /misc!
locale is [en_US]
stage is []
reason is [(null)]
libpng warning: iCCP: Not recognizing known sRGB profile that has been edited
libpng warning: iCCP: Not recognizing known sRGB profile that has been edited
fb0 reports (possibly inaccurate):
vi.bits_per_pixel = 32
vi.red.offset = 24 .length =8"
While applying update
"CYANOGEN RECOVERY
Install failed
E:Cannot load volume /misc!
E:failed to unmount auto
E:failed to set up expected mounts for install; aborting Installation aborted
E:Cannot load volume /misc!"
Click to expand...
Click to collapse
see [INDEX] Xperia L General Threads Index {11-Aug-2013}
This post will be moved to Xperia L Q&A, Help & Troubleshooting
ShubhamB said:
Not able to do "wipe data/factory reset" and "wipe cache partition" and hence not able to apply stable ROM on sony xperia l after last updating it to android l 5.0.x with Liquid Smooth ROM
This is the recovery log that i get.
While doing factory reset:
"I : Connected to Vold. .
I : 110 0 sdcard0 /storage/sdcard0 2
I : 110 0 sdcard1 /storage/sdcard1 1
I : 200 Volumes listed.
E : Cannot load volume /misc!
E : Cannot load volume /misc!
locale is [en_US]
stage is []
reason is [(null)]
libpng warning: iCCP: Not recognizing known sRGB profile that has been edited
libpng warning: iCCP: Not recognizing known sRGB profile that has been edited
fb0 reports (possibly inaccurate):
vi.bits_per_pixel = 32
vi.red.offset = 24 .length =8"
While applying update
"CYANOGEN RECOVERY
Install failed
E:Cannot load volume /misc!
E:failed to unmount auto
E:failed to set up expected mounts for install; aborting Installation aborted
E:Cannot load volume /misc!"
Click to expand...
Click to collapse
did you try cwm?
Sent from my Xperia T using XDA Free mobile app
not able to do cache wipe using cwm too
ClockworkMod Recovery is redirecting to the same recovery page where I am not able to do wipe cache/factory reset etc.
Also no output comes from phone when i dial *#*#7378423#*#* which is actually supposed to show my rooting status.
Before I used to simply download ROM and install it using recovery but after last update I am unable to do so now.
ShubhamB said:
Also no output comes from phone when i dial *#*#7378423#*#* which is actually supposed to show my rooting status.
Before I used to simply download ROM and install it using recovery but after last update I am unable to do so now.
Click to expand...
Click to collapse
just get yourself fota-cwm.....see "apps and themes"
Hello Guys ,
c2305 flashing problem with setool
Code:
SIGNED MODE (USING SERVER)
CFG:101000000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" OR "VOLUME DOWN" BUTTON ...
RUNNING S1_BOOT VER "2.14.J.2.16"
ACTIVE_COMP_AID : 0001
HWCONF_AID : 0001
LOADER_AID : 0001
BOOT_AID : 0001
[ llcomm: 00080000,00080000 ]
DEVICE ID: 7759D23E3F1B2BD5
FLASH ID: "0090/014A0086"
LOADER VERSION: MT6589_12
writing "C:\Users\Ramsat\Downloads\Compressed\16_0_B_2_16.FSP_Pelican_WORLD_i_1277_6019_S1_SW_LIVE_BB35_PID1_0002_MMC.R2A\sys ...
Processing package
system-sign_S1-SW-LIVE-BB35-PID1-0002-MMC.sin
ERROR: "Archive is damaged. Open failed - Native error: 00048"
Break
Elapsed: 9 seconds
I wanted to upload new rom to my Nokia TA-1188 via SP_Flash_Tool-5.1916_Linux.
Rom: https://drive.google.com/uc?id=1ORCq7T2H8ECCjqd4SDn9uODsGhKFcoff&export=download
and I have error:
$ ./flash_tool.sh
QObject::moveToThread: Cannot move objects with a parent
support_dl_cert_to_storage: 0
Connecting to BROM...
Scanning USB port...
Search usb, timeout set as 3600000 ms
[email protected]/devices/pci0000:00/0000:00:14.0/usb3/3-1
[email protected]/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0
[email protected]/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/tty/ttyACM0
vid is 0e8d
device vid = 0e8d
pid is 0003
device pid = 0003
com portName is: /dev/ttyACM0
Total wait time = -1665148920.000000
USB port is obtained. path name(/dev/ttyACM0), port name(/dev/ttyACM0)
USB port detected: /dev/ttyACM0
BROM connected
Downloading & Connecting to DA...
connect DA end stage: 2, enable DRAM in 1st DA: 0
DA Connected
executing DADownloadAll...
Stage:
[0] WRITE TO PARTITION [ preloader ]
Stage:
[4] WRITE TO PARTITION [ custom_a ]
Download failed.
Disconnect!
BROM Exception! ( ERROR : STATUS_SEC_IMG_TYPE_MISMATCH (-1073610710) , MSP ERROE CODE : 0x00.
[HINT]:
Verified boot is enabled.
Please download signed image(custom_a-verified.img) or disable verified boot.)((exec,../../../flashtool/Cmd/DADownloadAll.cpp,84))
Click to expand...
Click to collapse
and now I can't start fastboot mode on the phone and the phone can't be turned on.
I try:
- Vol- and usb kable to computer - 30s wait - nothing
- power on buttom - 60s wait - nothing
- https://forum.xda-developers.com/t/hard-reset-nokia-2-2.4000739/#post-81795587 - nothing
What did I do wrong and how to fix it?
Is my phone just for trash, or is it possible to get it working somehow?
Help please.