Database Info

HELP!!!!! I NEED TO REINsTALL LINUX ON A TV BOX

Hello all ,
I linked a serial cable to my allwinner a20 based Android Tv box.
It can not pass after the boot logo and next is all what it display in serial console.
Somebody pelase help i need to reisntall linux on it ,if you knwo any u boot keys that i have to press on the uboot serial consoel pelase help.I tryed to press ransom keys but i see nothin.
Here is all i see when it start:
====================================
HELLO! BOOT0 is starting!
boot0 version : 3.0.0
dram size =512
sum=0x9c3bd8cf
src_sum=0x9c3bd8cf
Ready to disable icache.
Jump to secend Boot.
[ 0.133]
U-Boot 2011.09-rc1-dirty (Nov 08 2013 - 11:06:32) Allwinner Technology
[ 0.141]version: 1.1.0
[ 0.144]pmbus: ready
axp read error
probe axp20x failed
axp_probe error
boot_clock = 912
dcdc2_vol = 1400
axp set dcdc2_vol to 1400 failed
dcdc3_vol = 1250
ldo2_vol = 3000
ldo3_vol = 2800
ldo4_vol = 2800
power_start = 0
storage_type = -1
usb_recovery = 0
find power_sply to end
fel key old mode
run key detect
no key found
no key input
dram_para_set start
dram_para_set end
[ 0.293]DRAM: 512 MiB
relocation Offset is: 15b27000
user_gpio config
user_gpio ok
DRV_DISP_Init: opened
[ 0.560]boot_disp.output_type=2
[ 0.563]boot_disp.output_mode=5
[ 0.567]boot_disp.auto_hpd=1
workmode = 0
[ 1.871]NAND: NAND_UbootInit
NB1 : enter NAND_LogicInit
nand : get id_number_ctl from script, 3
not burn nand partition table!
NB1 : nftl num: 3
init nftl: 0
NB1 : NAND_LogicInit ok, result = 0x0
[ 2.381]sunxi flash init ok
In: serial
Out: serial
Err: serial
--------fastboot partitions--------
-total partitions:12-
-name- -start- -size-
bootloader : 1000000 1000000
env : 2000000 1000000
boot : 3000000 1000000
system : 4000000 20000000
recovery : 24000000 2000000
databk : 26000000 2000000
misc : 28000000 1000000
private : 29000000 1000000
sysrecovery : 2a000000 21000000
data : 4b000000 40000000
cache : 8b000000 17000000
UDISK : a2000000 0
-----------------------------------
base bootcmd=run setargs_nand boot_normal
bootcmd set setargs_nand
key 0
recovery key high 6, low 4
cant find fstbt value
Fastboot detected, will boot fastboot
to be run cmd=run setargs_nand boot_fastboot
the user data'magic is bad
WORK_MODE_BOOT
board_status_probe
sunxi_bmp_display
WORK_MODE_BOOT
[ 2.509]Hit any key to stop autoboot: 0
run usb fastboot
sunxi_fastboot_init
recv addr 0x41000000
send addr 0x582580a8
delay time 0
usb init ok
------------------------------------------------------------------
After this nothing .Please help me

After searching all google and reading documantation ,I contacted the box seller and he gied me the files i neeeded.
I used a image file named sun7i_A20v2.0_android_sugar-ref001_2014.09.04_TakenYBSJ.img and a windwos software to flash it via usb named PhoenixPacketV333
To flash teh device you muist hava a serial console to the box (veru easy to do if you have the cable ) ,and keep pushed the key 2
on serial consle (putty) while powering the device ,so it enter in fel mode ( something like recovery mode ,it accept usb connection) .Then oyu need a usb male to male cable to conect the android tv box usb port to the windows usb port ,and start flasing using the PhoenixPacketV333 software.
If somebody needs more help or files just write here I check daily .
have a nice day all!

Sony Xperia Z3 D6603 Dead After Flash

HELLO .
After that the phone not connecting on flash mode.On device manager it show as SEMC Flash Device also not booting on setool and flash tool
and this the info before and after flash
****************Information Before flash****************
RUNNING S1_BOOT VER "S1_Boot_MSM8974AC_LA3.0_55"
ACTIVE_COMP_AID : 0004
HWCONF_AID : 0004
LOADER_AID : 0004
BOOT_AID : 0004
[ llcomm: 00080000,00080000 ]
DEVICE ID: 0CACFA51
FLASH ID: "0011/01000000"
LOADER VERSION: MSM8974AB_27
PHONE IMEI : 35427806021846
MODEL (from GDFS): D6603
SOFTWARE VERSION: 1282-2729_23.0.D.1.123
CUSTOM VERSION: 1286-4514_R16B
FILESYSTEM VERSION: APAC-LTE_23.0.A.2.93
SERIAL NO: CB5A217SWP
SECURITY UNITS BACKUP CREATED
Elapsed: 37 seconds
****************after flash****************
UNNING v 1.1425/01.15/UNI
CARD SERIAL xxxxxxxx
USBFLASH DRIVER VERSION 03.00.00.00
SIGNED MODE (USING SERVER)
CFG:100000000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" OR "VOLUME DOWN" BUTTON ...
RUNNING S1_BOOT VER "S1_Boot_MSM8974AC_LA3.0_55"
ACTIVE_COMP_AID : 0004
HWCONF_AID : 0004
LOADER_AID : 0004
BOOT_AID : 0004
[ llcomm: 00080000,00080000 ]
DEVICE ID: 0CACFA51
FLASH ID: "0011/01000000"
LOADER VERSION: MSM8974AB_27
PHONE IMEI : 35427806021846
MODEL (from GDFS): D6603
SOFTWARE VERSION: 1282-2729_23.0.D.1.123
CUSTOM VERSION: 1286-4514_R16B
FILESYSTEM VERSION: APAC-LTE_23.0.A.2.93
SERIAL NO: CB5A217SWP
SECURITY UNITS BACKUP CREATED
Elapsed: 37 seconds
SIGNED MODE (USING SERVER)
CFG:100000000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" OR "VOLUME DOWN" BUTTON ...
llbug: read error: "The device does not recognize the command"
supported phone was not detected
FAILED TO SETUP PHONE
Elapsed: 20 seconds
SIGNED MODE (USING SERVER)
CFG:100000000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" OR "VOLUME DOWN" BUTTON ...
llbug: read error: "The device does not recognize the command"
supported phone was not detected
FAILED TO SETUP PHONE
Elapsed: 45 seconds
SIGNED MODE (USING SERVER)
CFG:100000000000
PLEASE ATTACH TURNED OFF PHONE NOW
PRESS AND HOLD "BACK" OR "VOLUME DOWN" BUTTON ...
RUNNING S1_BOOT VER "S1_Boot_MSM8974AC_LA3.0_55"
ACTIVE_COMP_AID : 0004
HWCONF_AID : 0004
LOADER_AID : 0004
BOOT_AID : 0004
[ llcomm: 00080000,00080000 ]
DEVICE ID: 0CACFA51
FLASH ID: "0011/01000000"
LOADER VERSION: MSM8974AB_27
PHONE IMEI : 35427806021846
writing "K:\box flasher\[email protected]\flash sony ericsson\D6603\APP-SW_Leo_GENERIC_23.5.A.1.291_1282-2729_S1-SW-LIVE-9C84-PID1-00 ...
Processing package
APP-SW_Leo_GENERIC_23.5.A.1.291_1282-2729_S1-SW-LIVE-9C84-PID1-0006-MBR.zip
Testing package integrity ...
PROCESSING: partition-image_S1-SW-LIVE-9C84-PID1-0006-MBR.sin
UPDATING S1_BOOT TO VERSION : 1286-7314 S1_BOOT_MSM8974AC_LA3.0-M-3
PARSING: "DEVELOPMENT"
value OTP_LOCK_STATUS_1 : UNLOCKED, not match LOCKED
PARSING: "TEST_OEM0_007B40E1"
value OTP_LOCK_STATUS_1 : LOCKED, match LOCKED
value OTP_DATA_1 : 00000100, not match 01000400
value IDCODE_1 : 007B40E1, match 007B40E1
PARSING: "PRECOMMERCIAL_007B40E1"
value OTP_LOCK_STATUS_1 : LOCKED, match LOCKED
value OTP_DATA_1 : 01000400, match 01000400
value IDCODE_1 : 007B40E1, match 007B40E1
PROCESSING : rpm_S1_Boot_MSM8974AC_LA3_0_M_3_AID_4_PLATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID0A-OEM1-AID4-DEBUG00_S1-BOOT ...
PROCESSING : s1sbl_S1_Boot_MSM8974AC_LA3_0_M_3_AID_4_PLATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID65-OEM1-AID4-DEBUG00_S1-BO ...
PROCESSING : emmc_appsboot_S1_Boot_MSM8974AC_LA3_0_M_3_AID_4_PL ATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID09-OEM1-AID4-DEBUG ...
PROCESSING : sbl1_S1_Boot_MSM8974AC_LA3_0_M_3_AID_4_PLATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID00-OEM1-AID4-DEBUG00_S1-BOO ...
PROCESSING : tz_S1_Boot_MSM8974AC_LA3_0_M_3_AID_4_PLATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID07-OEM1-AID4-DEBUG00_S1-BOOT- ...
PROCESSING : dbi_S1_Boot_MSM8974AC_LA3_0_M_3_AID_4_PLATFORM-MSM8974AC-LIVE-HWID007B40E1-SWID12-OEM1-AID4-DEBUG00_S1-BOOT ...
PROCESSING : Leo_S1BootConfig_MiscTA.ta
Writing TA unit 0002/084F/0061
Writing TA unit 0002/08FD/0001
BOOT UPDATED
SKIP: partition-image_S1-SW-LIVE-9C84-PID1-0006-MBR.sin
PROCESSING: apps_log_S1-SW-LIVE-9C84-PID1-0006-MMC.sin
PROCESSING: cache_S1-SW-LIVE-9C84-PID1-0006-MMC.sin
PROCESSING: kernel_S1-SW-LIVE-9C84-PID1-0006-MMC.sin
PROCESSING: fotakernel_S1-SW-LIVE-9C84-PID1-0006-MMC.sin
writing "K:\box flasher\[email protected]\flash sony ericsson\D6603\FSP_Leo_Customized-MEA_GLOBAL-LTE_23.5.A.1.291_1288-4387_R4D_S1-S ...
Processing package
FSP_Leo_Customized-MEA_GLOBAL-LTE_23.5.A.1.291_1288-4387_R4D_S1-SW-LIVE-9C84-PID1-0006-MMC.zip
Testing package integrity ...
PROCESSING: userdata_S1-SW-LIVE-9C84-PID1-0006-MMC.sin
PROCESSING: system_S1-SW-LIVE-9C84-PID1-0006-MMC.sin
PROCESSING: amss_fs_1_S1-MODEMSW-LIVE-9C84-PID1-0006-MMC.sin
PROCESSING: amss_fs_2_S1-MODEMSW-LIVE-9C84-PID1-0006-MMC.sin
PROCESSING: amss_fsg_S1-MODEMSW-LIVE-9C84-PID1-0006-MMC.sin
Processing UPDATE files
SKIP: simlock.ta
PROCESSING: cust-reset.ta
Writing TA unit 0002/08A4/000E
PROCESSING: fota-reset.ta
Writing TA unit 0002/0964/0001
PROCESSING: auto-boot.ta
Writing TA unit 0002/0907/0001
PROCESSING: osv-restriction.ta
Writing TA unit 0002/091A/0001
Elapsed: 323 seconds
****************Flash fully complete****************
help. i need solution and thanks advance
and thank you for your attention

mtk6737 baseband unknown and imei blank..how to repair

my phone model- CENTRIC CM2221
android -6.0
problem- no service
i check imei blank and baseband unknown .
how to solve ?
please provide me stock rom or good solution ..
Phone Info Log .........
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 16 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6737
BB_CPU_NME : [MediaTek] MT6737M|MT6737_S00
BB_CPU_EXT : 0xCB00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v5.1624.16.07
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x93
NAND Flash : NOT INSTALLED
eMMC Flash : 510001154D333238E8020042AF2EBAF4
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x15 , OEM : 0100
[eMMC] : FLASH_INF : [SAMSUNG] , BM328
[eMMC] : FLASH_CID : 150100513832334D420002E8F4BA73AF
[eMMC] : FLASH_BRT : 0x00400000 , 0x00400000 , 0x00400000
[eMMC] : FLASH_LEN : 0x00000003A3E00000
[eMMC] : FLASH_UCP : 14910 MiB [eMMC 16 GiB]
DEV RID : 0xEF0B331D1BA71095953C8F7CFAA875FB
INT RAM : 0x00020000
EXT RAM : 0x80000000 [2 GiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!

You cm2 to Repaire baseband
Sent from my iPhone using Tapatalk Pro

abuk91 said:
You cm2 to Repaire baseband
Sent from my iPhone using Tapatalk Pro
Click to expand...
Click to collapse
bro allready try but not done .....need flash file

no solution????????????????????????????????????????????????????????????

I have the same problem
phone accent neon no service imei not found
I'm looking for rom file for this model

MBW vodacom kicka 4 plus won't boot , what could be the problem

What could be the problem ..
Operation : Identify [ v2.18 ]
Mode : FLASH
1. Make sure device is powered off. Power off, if need. Wait 20 seconds after
2. Insert USB cable in phone
Waiting for device connection ...
PTFN : MediaTek USB Port (COM7)
MODE : BOOTROM
PORT : 7
Waiting BOOT ack ...
BROM : Skip ACK verify
BROM : Init BROM
BROM init passed!
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000
TYPE : LEGACY MTK
BROM : MEID : 84E1311723E5F72DDF767B7B831BD757
BROM : SecLevel : 0x00000000
BROM : SecMode : PLAIN [+PRL]
BROM : BROM|BL : 0x05|0xFE
BROM : BOOTROM
MODE : 0_base : BASE_v2044 | Manual : Enabled
AGENT : Look for suitable BootChain in DA ...
AGENT : MTK_AllInOne_DA_SP.bin
AGENT : Found MT6580
AGENT : MTK_DOWNLOAD_AGENT
BROM : Sending 1st DA ...
BROM : DA sent
BROM :Transfer control to DA ...
DA : AGENT started!
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
eMMC : OK
eMMC : 45000170414934456E0101344F2524D7
DAInf: 4 : 2 : 156
DA : EXT_RAM NOT initialized!
eMMC : OK
eMMC : 70010045453449413401016ED724254F
NAND : DEVICE NOT FOUND
NAND : 000000000000000000000000
DRAM : 0x0178
EMI : DEV : MT6752
EMI : SRC : preloader_k80hd_bsp_fwv_512m.bin
EMI : CNT : 0003
EMI : [00] : ID : 700100454534454134 : VEN : KINGSTON | DEV : EE4EA4 : RAM : [ 512.00 MB ]
EMI : [01] : ID : C80111344D45594D41 : VEN : UNKNOWN | DEV : 4MEYMA : RAM : [ 512.00 MB ]
EMI : [02] : ID : 700100454534494134 : VEN : KINGSTON | DEV : EE4IA4 : RAM : [ 512.00 MB ]
EMI : Init EMI from PRELOADER
INIT : 0xBC : DRAM [ 0x00000000 : [ 0 B ] ]
DRAM : DRAM: 0x20000000 [ 512.00 MB ]
DA : DRAM ready!
DA : BOOT to 2nd DA ...
DA : Receiving HW info
EMMC: 70010045453449413401016ED724254F
EMMC: VEN : KINGSTON | OEM : 01 | DEV : EE4IA4
EMMC:
BOOT1 : 0x00200000 [ 2.00 MB ]
BOOT2 : 0x00200000 [ 2.00 MB ]
RPMB : 0x00080000 [ 512.00 KB ]
USER : 0xE2000000 [ 3.53 GB ]
SRAM: 0x00020000 [ 128.00 KB ]
DRAM: 0x20000000 [ 512.00 MB ]
CHIP : MT6580 , SBID : 0x8A00 , HWVR : 0xCA00 , SWVR : 0x0000 , EVOL : 0x0000
RNID : C936D9FF3A84D90E7B2010FA5212EA26
STATUS : BLANK FLASH
BSTYLE : EMMC FLASH BOOT
DA : USB : FULL-SPEED
DA : USB : Change Port Speed
PTFN : MediaTek DA USB VCOM (Android) (COM9)
MODE : PRELOADER PORT
PORT : 9
Boot done!
Patch Level : O11019
Display ID : O11019 release-keys
Ver. CodeName : REL
Ver. Release : 8.1.0
Sec. Patch : 2019-09-05
Build Time : 23.08.2019
Product Model : Kicka_4_Plus
Product Brand : MobiWire
Product Name : Kicka_4_Plus
Product Device : Kicka_4_Plus
Product Manfct : MobiWire
Product Info : k80hd_bsp_fwv_512m
Board Platform : mt6580
Product Board : VP402_Mobiwire_Kicka4Plus
USERDATA : FILESYSTEM : F2FS with FDE ( Full Disk Encryption ***)
Done!
Elapsed: 00:00:30
Operation : HW Test [ v1.58 ]
1. Power Off Phone , Remove battery , Insert back
2. Insert USB cable. In some cases require hold BootKey
Wait for phone...
Phone found! [ 1 ]
Sync...
Inital Boot Ok!
BB_CPU_PID : 6580
BB_CPU_NME : [MediaTek] MT6580_S00
BB_CPU_EXT : 0xCA00 , 0x8A00 , 0x0000
Processing BROM stage
Settings for BROM configured!
SecCfgVal : 0x00000000
BromVer : 0x00FF
BLVersion : 0x0001
PreLoader : Active [ Boot with PL ]
BootLdrSS : NORMAL with PRELOADER
Processing DA stage
DA Select done, will use MTK_AllInOne_DA_v3.3001.2018-04-25.11:26_437806
Sending and initialize DA ...
Running DA ver.4.2 on BBID : 0x9C
NAND Flash : NOT INSTALLED
eMMC Flash : 70010045453449413401016ED724254F
Initialize Memory ...
DRAM already initialized by Preloader
DAgent sent , init HW now
eMMC FlashIC initialized
[eMMC] : FLASH_VEN : 0x70 , OEM : 0100
[eMMC] : FLASH_INF : [KINGSTON] , 4AI4E
[eMMC] : FLASH_CID : 70010045453449413401016ED724254F
[eMMC] : FLASH_BRT : 0x00200000 , 0x00200000 , 0x00080000
[eMMC] : FLASH_LEN : 0x00000000E2000000
[eMMC] : FLASH_UCP : 3616 MiB [eMMC 4 GiB]
DEV RID : 0x4EA014B2FFD936C90ED9843AFA10207B
INT RAM : 0x00020000
EXT RAM : 0x20000000 [512 MiB]
BOOT TYPE : EMMC_FLASH_BOOT
SOC VERIFY : C1
Boot Ok!
Processing Miscellaneous test
MSC : BatteryLevel : 3009 mV
[Processing] FlashMemory Read-Write test
[eMMC] : [KINGSTON] , 4AI4E , 0xE2000000 , 3616 MiB
[eMMC] : CID : 70010045453449413401016ED724254F
[eMMC] : MODE : SQ-WR
[PASSED] : eMMC RW Check #1 Ok!
[eMMC] : MODE : RA-WR
[PASSED] : eMMC RW Check #2 Ok!
[eMMC RO CHECK] : eMMC Ok! READ-WRITE Passed!
[Processing] RAM Read-Write test
[DRAM] : 0x20000000 , 512 MiB
[DRAM] : ADDRESS BUS test
[PASSED] : Bus Count : 0x1C
[DRAM] : DATA BUS test
[PASSED] : Bus Count : 0x1F
[DRAM] : PATTERN test
[PASSED] : PATTERN Ok
[DRAM] : INCDEC test
[PASSED] : INCDEC Ok
All Done!
Done!
Elapsed: 00:01:40
Reconnect Power/Cable!

Question Nokia TA-1188 no fastboot mode and can't turn it on

I wanted to upload new rom to my Nokia TA-1188 via SP_Flash_Tool-5.1916_Linux.
Rom: https://drive.google.com/uc?id=1ORCq7T2H8ECCjqd4SDn9uODsGhKFcoff&export=download
and I have error:
$ ./flash_tool.sh
QObject::moveToThread: Cannot move objects with a parent
support_dl_cert_to_storage: 0
Connecting to BROM...
Scanning USB port...
Search usb, timeout set as 3600000 ms
[email protected]/devices/pci0000:00/0000:00:14.0/usb3/3-1
[email protected]/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0
[email protected]/devices/pci0000:00/0000:00:14.0/usb3/3-1/3-1:1.0/tty/ttyACM0
vid is 0e8d
device vid = 0e8d
pid is 0003
device pid = 0003
com portName is: /dev/ttyACM0
Total wait time = -1665148920.000000
USB port is obtained. path name(/dev/ttyACM0), port name(/dev/ttyACM0)
USB port detected: /dev/ttyACM0
BROM connected
Downloading & Connecting to DA...
connect DA end stage: 2, enable DRAM in 1st DA: 0
DA Connected
executing DADownloadAll...
Stage:
[0] WRITE TO PARTITION [ preloader ]
Stage:
[4] WRITE TO PARTITION [ custom_a ]
Download failed.
Disconnect!
BROM Exception! ( ERROR : STATUS_SEC_IMG_TYPE_MISMATCH (-1073610710) , MSP ERROE CODE : 0x00.
[HINT]:
Verified boot is enabled.
Please download signed image(custom_a-verified.img) or disable verified boot.)((exec,../../../flashtool/Cmd/DADownloadAll.cpp,84))
Click to expand...
Click to collapse
and now I can't start fastboot mode on the phone and the phone can't be turned on.
I try:
- Vol- and usb kable to computer - 30s wait - nothing
- power on buttom - 60s wait - nothing
- https://forum.xda-developers.com/t/hard-reset-nokia-2-2.4000739/#post-81795587 - nothing
What did I do wrong and how to fix it?
Is my phone just for trash, or is it possible to get it working somehow?
Help please.