[Q] custom ROM for gt-s5830i - General Questions and Answers

I have bought a galaxy ace and unfortunately it is gt-s5830i which hasn't got any custom roms till now as far as I know isn't there anything that be done to overclock this phone over 832mhz. ickyyy wrote that we can use the roms of galaxy y but it would have some bugs such as camera would not work. ickyyy if you are reading then please help me I can bare some bugs but I am mainly excited to overclock my phone. In one of your posts I found the clockmodrecovery and have backed up my phone please can you suggest me that whether should I use a ROM of galaxy y and if the bugs are too much for me can I restore my phone (as it is my first Android and I have bought it 3 Weeks before and haven't used Odin etc).
Also it would be a great help if you tell me or just give a link to the full and the easiest easiest way of flashing.

My advice is don't risk to flash ROM's for galaxy Y.It has the same hardware,however it's not 100% sure that it won't kill your phone.The display resolution is different.It may be posible that you would be able to flash and run it but it has no point.For overclocking you need a custom kernel which.Flashing a kernel for a different device may be very dangerous as it can kill your phone with no chance of reviving it.Just wait some time and there will be custom roms,kernel and everything for s5830i and you'll be able to overclock it.Many people are currently trying to port some ROMs and developing kernels but there are no good developers for this phone yet so it's very hard and slow...don't rush it!Use the stock rom.Samsung must release a new update to optimize applications and the videocore IV so it should give better FPS on games and etc...

hi ickyyy .
where are DEVs . why they dont work on s5830i ?
there are a lot of people waiting for a custom rom for 5830i !!!!
sorry for my english .

Related

Which ROMs can be used for the Samsung Spica?

Hi all,
Sorry 'bout the n00b question - but are there any of the custom ROM's out there which can be used for the Samsung Spica? I think my Spica is so darn slow, so really want to spice it up a little.
Just come off a SE Xperia X1, and used to flash it every other day - which I kinda miss on my Android device.
So - how is my outlook here?
Happy new year!
No one knows anything about this?
millen said:
Hi all,
Sorry 'bout the n00b question - but are there any of the custom ROM's out there which can be used for the Samsung Spica? I think my Spica is so darn slow, so really want to spice it up a little.
Just come off a SE Xperia X1, and used to flash it every other day - which I kinda miss on my Android device.
So - how is my outlook here?
Happy new year!
Click to expand...
Click to collapse
Not going to get much help here. After all this is a forum for HTC devices. AFAIK there is'nt a lot of custom ROm development for the spica apart from Leshak's ROM. you could google it.
Cheers
Try samdroid.net. There are active forums for samsung spica rooting, kernals and custom roms alongwith lots of tweaks and mods/
Hey
I have the following
Baseband version-i570EJXJC2
Kernel 2.6.29 [email protected] #2
build eclair jpjd7
Questions-
1. Which of these is the PDA or CSC etc
2. what should i do..i have jc2....I cant use spica jc3.ops
3.all i want is to root my phone and use app2sd since my phone memory is always full.
I cant use LESHAKS........... lk2 mod without being on lk mod i guess...also this firmware is what i got here in dubai. please help me root my phone...I am so confused with this firmware. only after i flash a good european firmware and root it can i use custom roms right?
AFAIK, the only stable and popular ROM, is the one from Leshack.... lets hope cyanogen releases something... i think both can take profit of each other's work and release something wonderful (froyo + multitouch + overclock + 3D driver.... etc...)

[Q] Samsung galaxy s i9000 noob asking

Hello xda forum! I am new and totally NOOB! I recently bought a galaxy s i9000 from a little research in the forum I decided that I have to root it because I am already having a lot of problems.. I am having now the original firmware from samsung(updated via kies) and I am in version 2.3.3 (basebend version I9000XXJVO and kernel version 2.6.35.7-I9000XWJVI-CL210427 [email protected] #2 ...I have no idea what are those things!!! and build number GINGERBREAD.XWJVI) I want to root it on Ice cream sandwich! It look so cool and fast. but I have no idea how and which rom to choose because I saw 3-4 different in the forum.
So...
1. I want to learn how to root and what do I need.
2. I want your opinions on the ics roms (suggest me whats the best)
3. Is everyone have the same problem with the battery!?
4. If I done this and then I want to take the rom out is it possible?
I really thanks you for your time! and sorry if I created a same post..
more info about my phone (found them with a code):
GT-i9000HKDEUR
PDA I9000XWJVI
PHONE I9000 XXJVO
CSC I9000 XXJV9
Thanks again for everything!!!
1)To root your Galaxy S you can use this http://forum.xda-developers.com/showthread.php?t=803682 quick and easy.
2) I personally have not used the ICS roms for SGS but this one seems to be the most stable one around http://forum.xda-developers.com/showthread.php?t=1398223
3) Battery issues plagued me when I got my SGS as well, I would suggest getting something like Juice Defender off the market it can greatly help out battery life
4) Yes it is possible to go back to stock firmware all you need to do is flash back the stock firmware which you can find through Google.
1)to root my galaxy I used a modded kernel like cf root or semaphore which give you the root permissions and cwm
2)i never tried a ics rom because i'll try one of them when they will become stable, i don't like beta/alpha roms
3)battery isn't very very good...i can arrive till 8 pm normally, but if i start playing, wifi, music...in 4 hours battery is ko
4)yes if you want to take the rom out, you can flash a stock firmware/rom
hope it helps
then tell me how it has gone
thanks guys for your answers..I will think about doing it..and if I have any other question I will ask you...really thanks from your help
I use and still testing the stock ICS and i have to say that you MUST not install it in my experience so far in a week it have some issues. I am a noob too but learning, and this is a very versatil phone to use and manage. Meanwhile i sugest to upgrade to oldEr versions of GINGERBREAD
Sent from my GT-I9100 using xda premium

Developing

My phone, Gt-S7500L (galaxy ace plus) isn't so famous among the Android owners, so there are many custom roms. We dont have Cyanogemmod, and its is a sad thing, but im actually trying to port it from the galaxy ace throught the android kitchen. I m afraid of bricking my phone, so my question is if i use the STOCK kernel in the custom ROM that i'm porting, is there any chance of HARD brick(softbrick isnt a real problem,i backuped the OS)? I know! Custom rom without custom kernel may dont make sense, beu we, ace plus owners, are desperate.
Thank u :good:
gabriel2anjos said:
My phone, Gt-S7500L (galaxy ace plus) isn't so famous among the Android owners, so there are many custom roms. We dont have Cyanogemmod, and its is a sad thing, but im actually trying to port it from the galaxy ace throught the android kitchen. I m afraid of bricking my phone, so my question is if i use the STOCK kernel in the custom ROM that i'm porting, is there any chance of HARD brick(softbrick isnt a real problem,i backuped the OS)? I know! Custom rom without custom kernel may dont make sense, beu we, ace plus owners, are desperate.
Thank u :good:
Click to expand...
Click to collapse
bricked= bootloader corrupted if you don't touch bootloader nothing happens
maybe you think about a hardware failure ..this is possible when porting a rom
to port a rom is not about copy/paste files from somewhere if you see kitchen has "experimental support" for porting it can help you to "put things together" I mean to root that rom and add some features then pack in a flashable .zip format but you need a rom for that ! kitchen can help you to port in the case you get Cyanogenmod sources for a device that is almost the same as hardware specs with yours

[Q] [HELP] Attempt to Cm11, CM10 for Galaxy S Duos S7562L !

Guys,
I'm trying to make a port for CM11 , CM10 or anything to mobile phone Galaxy S Duos - S7562 -L because we have no other developer doing anything for this device and decided by the hands in the dough , I have knowledge in linux and a little programming , have experience in iT for 10 years and want to risk , however could not follow the official tutorials Cyanogem and Google ... always end up with an error that I can not find anything .
1 - My first doubt is whether it is possible to perform the port , it is strange no one has yet tried a port of anything except the kyleopen that eh original rom with just a few additions script and deletion of apps from Samsung . It is possible to perform this port ? Developers have achieved the grand duos , so I believe it is possible also to my device .
2 - it is possible to perform another port using the stock rom sansung , Galaxy Young Duos (with android 4.2.1 ) is very similar to S duos ( stuck in 4.0.4 ) in terms of hardware but not seen anything about how to accomplish this type of port anywhere , extracts the / system and did some comparisons but it does not know how to package and flash , since the packages that depend on ODIN I have to work . ( listed on the site SAMMOBILE.com )
3 - The phone is with root access , and also with cwm 5 installed , however when I go into FlashBoot mode, it can not find the device , but adb is working properly ... need to do something before accessing the boot flash samsung for this unit ?
I apologize for the questions , however I researched a lot and have installed linux on my pc at the moment for countless attempts and so far always resulted in failure , I 'm not going to give up so easily , however I must be missing something ... this phone does not have any version ever home so most of the tutorials are not intended for me , as well as those I found to use the power fail at the time of fastboot , as some failures occur at compile time , believe they are incomplete .
Thanks in attention , hope to enlist the help of the community , if we get over this advancement in this unit could free thousands of users of this junk phone for what was really expected when we bought it Thanks in attention, hope to enlist the help of the community, if we get over this advancement in this unit could free thousands of users of this junk phone for what was really expected when we bought it.
(I ended up getting with this unit because I gave my wife a gift, not score as longer stand to hear her complaining of lockups, unable to make calls, slowness ... and all claims that I believe that all users of this device have already done, I my turn to give her another device, a D3 motorola ... and this is making her happy: D, I still put this curse on to with my hand .. lol)
Heeeeeeelp anyone ...
Enviado de meu GT-S7562L usando Tapatalk
alooooone
!blackram said:
Heeeeeeelp anyone ...
Enviado de meu GT-S7562L usando Tapatalk
Click to expand...
Click to collapse
acho q estou sozinho mesmo .... U_U:crying:
...:silly:
mais um
!blackram said:
Guys,
I'm trying to make a port for CM11 , CM10 or anything to mobile phone Galaxy S Duos - S7562 -L because we have no other developer doing anything for this device and decided by the hands in the dough , I have knowledge in linux and a little programming , have experience in iT for 10 years and want to risk , however could not follow the official tutorials Cyanogem and Google ... always end up with an error that I can not find anything .
1 - My first doubt is whether it is possible to perform the port , it is strange no one has yet tried a port of anything except the kyleopen that eh original rom with just a few additions script and deletion of apps from Samsung . It is possible to perform this port ? Developers have achieved the grand duos , so I believe it is possible also to my device .
2 - it is possible to perform another port using the stock rom sansung , Galaxy Young Duos (with android 4.2.1 ) is very similar to S duos ( stuck in 4.0.4 ) in terms of hardware but not seen anything about how to accomplish this type of port anywhere , extracts the / system and did some comparisons but it does not know how to package and flash , since the packages that depend on ODIN I have to work . ( listed on the site SAMMOBILE.com )
3 - The phone is with root access , and also with cwm 5 installed , however when I go into FlashBoot mode, it can not find the device , but adb is working properly ... need to do something before accessing the boot flash samsung for this unit ?
I apologize for the questions , however I researched a lot and have installed linux on my pc at the moment for countless attempts and so far always resulted in failure , I 'm not going to give up so easily , however I must be missing something ... this phone does not have any version ever home so most of the tutorials are not intended for me , as well as those I found to use the power fail at the time of fastboot , as some failures occur at compile time , believe they are incomplete .
Thanks in attention , hope to enlist the help of the community , if we get over this advancement in this unit could free thousands of users of this junk phone for what was really expected when we bought it Thanks in attention, hope to enlist the help of the community, if we get over this advancement in this unit could free thousands of users of this junk phone for what was really expected when we bought it.
(I ended up getting with this unit because I gave my wife a gift, not score as longer stand to hear her complaining of lockups, unable to make calls, slowness ... and all claims that I believe that all users of this device have already done, I my turn to give her another device, a D3 motorola ... and this is making her happy: D, I still put this curse on to with my hand .. lol)
Click to expand...
Click to collapse
You can install cm11, cm10.1 and cm10.2 on s duos which is actually built for galaxy ace 2x. Only problem is that the build has a long list of bugs, and both the sim card slots don't work as the build is for a single sim device. Instead of building from scratch why don't you just modify ace 2x rom so that atleast one of the sim card slot works.
Nikhil...007 said:
You can install cm11, cm10.1 and cm10.2 on s duos which is actually built for galaxy ace 2x. Only problem is that the build has a long list of bugs, and both the sim card slots don't work as the build is for a single sim device. Instead of building from scratch why don't you just modify ace 2x rom so that atleast one of the sim card slot works.
Click to expand...
Click to collapse
Nikhil ... 007, I appreciate the information and I will start working on the rom for now, hope to have success in the making, I really think it will be simpler q trying to update, because I tried several times to make from scratch and have not had any success in the attempt which made me to be discouraged.
Thanks for this new breath if I get some functional thing u will be the first to know !!! :highfive::good:
!blackram said:
Nikhil ... 007, I appreciate the information and I will start working on the rom for now, hope to have success in the making, I really think it will be simpler q trying to update, because I tried several times to make from scratch and have not had any success in the attempt which made me to be discouraged.
Thanks for this new breath if I get some functional thing u will be the first to know !!! :highfive::good:
Click to expand...
Click to collapse
Best of luck!!!!:good::highfive:
So, which one are you gonna work on CM 11 or CM 10???
HEY WELL IVE FLASHED CM 11 ON S DUOS AND FOUND NO POSSIBLE WAY TO FIX NETWRK ISSUE NOW
but ony network is not only issue u got no blue tooth and camera is always rotated we will fix those soon hope so :angel::angel::angel::angel:
Guys any progress?

[Completed] [q] porting kernels of devices to other devices

Story how i got that idea
(Skip this if u dont give a single **** about other people)
Can anyone please help me
I have a Galaxy S3 with a half-way-broken Screen. The reason why i say half-way is because the display actually works butt has very very low brightness so i am not able to see anything on my screen when i go outside or go into a room that is bright. Before i got this S3 i had many other phones like Omnia 2,Galaxy s2,Galaxy Note, and so on and i remembered a feature from siyah kernel on my Galaxy S2 wich allowed u the set a GAMMA SHIFT up to 50+. It was goddamn bright and i also knew that the siyah kernel is also awiable for the S3. After flashing it i was very dissapointed because exactly this feature was not there anymore. I flashed al the older versions of siyah kernel i found but non of them had gamma shift. Then i searched for another Kernel that could have this feature but i was not lucky at all. I quit messing around with my phone and used it as it is even it was a real pain in the ass. Some days later one of my friends who is also a person that has very good knowledge about android, ROMs, Kernels,.... He told me about that he has succesfully flashed a Galaxy Note 2 ROM to an Galaxy Note by only changing the files in the meta-inf folder from GT-N7100 to GT-N7000. When i heard about this i have tried to do the same with the siyah kernel from s2 to convert into a s3 kernel with the features from the s2 kernel that was missing. So long i had no luck by converting it. i have also looked up to threads in there people show how to convert ROMs from phones to ROMs for another phones.
THE REAL QUESTION!!!!
Is it possible to convert a phones kernel to another phone?
If yes, how do i do it?
Which programms do i need?
Can anyone please help me with that?
Hi there
You can learn more about kernel development here: [GUIDE] Build Your Own Android Kernel{Easiest and Fastest Way] [Using The NDK]
Here is also a video guide : [TUTORIAL][VIDEO]Build your own Android kernel
Good luck

Categories

Resources