I have a Dream running 1.5 and I want to download 1.6 (because for some reason I can't get it OTA) and it works perfectly until it installs the update and says "E: Failure at line 2: assert file_contains("SYSTEM:buildprop", "ro.build.fingerprint=tmobile/kila/dream/trout:1.5/CRC1/150275:user/ota-rel-keys,release-keys") == "true" l l file_contains("SYSTEM:build.prop", "ro.build.fingerprint=tmobile/kila/dream/trout:1Installation aborted." Any idea what's going on?
Hello.
I have exactly the same problem.
is there any way to update system without waiting for automatic update?
Greetings
hnnknr
Hi guys, first post. Need a little bit of help here..firstly let me apologize if i have asked this in the wrong place...ive got no idea whats going on here sorry!
Ive got a Nexus S 3g..running version 2.3.6
The baseband version is I9023XXKF1 and kernel version 2.6.35.7-gf5f63ef
I had no problems rooting the phone and getting to the clockwork recovery, and after having downloaded the new b9 build of the ICS from http://forum.xda-developers.com/showpost.php?p=18622852&postcount=1 i put it on the sd card and then tried to load it but i got this message....
Finding update package...
Opening update package...
Installing update...
assert failed: get prop ("ro.product.device") =="crespo" l l getprop (ro.build.product") == "crespo" l l getprop ("ro.product.board") == "crespo"
E:Error in /sdcard/update.zip
(Status 7)
Installation aborted
Is there something i have done wrong, or something i need to do in order to get this running alright on my phone? Any help would be much appreciated
Cheers guys
I would prefer to ask this in the [ROM][NIGHTLY] CyanogenMod 7.2-RC3+ for Huawei U8150 (June 11th) thread but I can't post in there since I am a noob.
I have a Huawei Ideos U8150 which I bought from aldi, locked to the virgin mobile network.
Today I decided to try and install a third-party firmware to get extra performance, because as stock the phone is very sluggish and drives me bonkers. Well... I have been at it for hours and have run into a hurdle that I can't get over. Hence me posting here.
I've tried with three different builds of Cyanogenmod 7.2, one build from june, the latest build, and the stable build.
I've tried to follow the instructions in the above mentioned thread as close as possible, had to do it slightly differently since I can't figure out how to
access the phone after doing the 3-button combo (some Android 1.0 driver I need to install, googled it, nothing specific to my phone).
I downloaded and installed z4root, and successfully obtained root access.
I duplicated the problem just before for the purposes of this post, attempting to install the Cyanogenmod 7.2 stable build.
I downloaded and installed clockworkmod rom manager, opened it, pressed Flash ClockworkMod Recovery to install that, and I think this might be part of my problem, it says: Confirm Phone Model and the only option is Huawei U8160, I figure close enough.
Let it do its thing, pops up with the root access confirmation screen, I hit Allow, then it says successfully flashed clockworkmod revoery! I hit OK, then I hit reboot into Recovery.
I let it do a backup, then I do wipe data/factory reset as well as wipe cache partition as per the above mentioned thread (except doing it inside clockwork recovery instead of doing it using the 3 button method), then hit install from sdcard zip, hit choose zip from sdcard, browse to the cyanogenmod zip file (cm-7.2.0-u8150.zip), say Yes, and it ****s itself. Great, I wiped all my data, now I have to set my phone up again from scratch with the stock rom. Grrrr!
The important part of the log:
Code:
-- Installing: /sdcard/cm-7.2.0-u8150.zip
mtd: successfully wrote block at fffffd6800000000
I:Set boot command "boot-recovery"
Finding update package...
I:Update location: /sdcard/cm-7.2.0-u8150.zip
Opening update package...
Installing update...
script aborted: assert failed: getprop("ro.product.device") == "u8150" || getprop("ro.build.product") == "u8150" || getprop("ro.product.board") == "u8150" ||
getprop("ro.product.device") == "ideos" || getprop("ro.build.product") == "ideos" || getprop("ro.product.board") == "ideos" ||
getprop("ro.product.device") == "U8150" || getprop("ro.build.product") == "U8150" || getprop("ro.product.board") == "U8150"
assert failed: getprop("ro.product.device") == "u8150" || getprop("ro.build.product") == "u8150" || getprop("ro.product.board") == "u8150" || getprop("ro.product.device") == "ideos" || getprop("ro.build.product") == "ideos" || getprop("ro.product.board") == "ideos" || getprop("ro.product.device") == "U8150" || getprop("ro.build.product") == "U8150" || getprop("ro.product.board") == "U8150"
E:Error in /sdcard/cm-7.2.0-u8150.zip
(Status 7)
Installation aborted.
result was NULL, message is: assert failed: install_zip("/sdcard/cm-7.2.0-u8150.zip")
I have put the whole log into a pdf as well as a doc and attached it.
In one of my several attempts to do this, I made sure I ran the "Fix Permissions" tool before trying to install the ROM in the hope that would make it work but it made no difference (same error).
I have no idea what I've done wrong, it seems like I have done everything correctly but it just won't work because it hates me. Maybe it's because it is a Virgin Mobile phone, maybe it is because clockworkmod thinks it is a U8160 when it is really a U8150? Who knows.
Hopefully somebody can think of some trick I can apply to try and get around this issue.
Sorry for such a long post, I just wanted to make sure I was as thorough as possible to make sure there isn't some tiny little thing I am doing wrong that is screwing it up for me.
Should I try installing Cyanogenmod 6.x.x tomorrow to see if it likes that any better?
Should I try downgrading to an earlier version of Clockworkmod ROM manager (if that is even possible)?
Is there some other straight-forward way of installing Cynaogenmod on my phone other than Clockworkmod?
Thanks very much,
VirginIdeos
CWM 5.0.2.7 used.
recruit said:
CWM 5.0.2.7 used.
Click to expand...
Click to collapse
So, I have to use an earlier version of clockwork mod? It's easy to install the latest version, but were do I download an earlier version from? Or are you just posting this for information?
Bump: Got it working. You have to flash Clockworkmod recovery version 3.0.2.7 onto the device, the latest will not work with the U8150 (should work with the U8160). I will throw up a how-to when I have enough posts.
But I'm still having issues: WiFi does not work, even though it is supposed to be fixed in Cyanogenmod 7.2. This is a pity, because it means I won't be able to stream video from my helmet cam to my Ideos without using the stock software pre-installed on the Ideos, which is very very sluggish. It already took me a lot of frigging around to be able to download the app for this from google play.
There is a wifi fix here: http://forum.xda-developers.com/showthread.php?t=1177650 but the link to download Salsa Slide Final is no longer active (I'm not sure that the files would work with the Ideos anyway) AND the wifi fix flashable zip won't work because it requires an early version of clockwork mod recovery which will not work on the Ideos U8150. ARGH!! And I'm not sure that the zip would flash correctly onto the Ideos anyway. The only way this could work would be for someone to update the zip so it works with clockworkmod recovery 3.0.2.7, and port the changes to the Ideos (if need be). Beyond my abilities, especially the porting part!
Even more frustratingly, there are people who are posting in the CM 7.2 Ideos U8150 thread whose wifi seems to be working just fine. Blast them!
Bump:
If I had known CWM9 was out for the U8150, I would not have even bothered with 7.2.
So I've installed CWM9 on my Ideos. Everything works great, including WiFi , so I'm rapt. It is a little more sluggish than 7.2 in some respects, but much smoother and snappier in others, and the UI and startup screen are a lot cooler.
As an aside, the ActionConnect app for connecting an Android phone to the new Ego 727 helmet camera doesn't work fully with the U8150. I can connect with the app and change the camera's settings, but when trying to view the live stream, the app exits. I had to trick the Google servers into thinking I had a Samsung Galaxy S in the first place to be able to download the app (even tricking them into thinking I had a Nexus S did not work). I've contacted tech support about this and the compatibility list issue. I'll throw up a separate thread including the APK for those who are having trouble downloading the app.
ok, I have searched the forums and I don't think i am a nooby, though i may come across of being one. I have installed custom roms on many devices ...ie: samsung galaxy s2, htc inspire, htc vivids. and i follow directions pretty well but this has got me stumped.
now i just got a new sony xperia tl lt30at from at&t (rooted and cwm installed) and have been trying for days to install a custom rom.
the first rom i have tried was Xperiment and i get
-- Installing: /sdcard/XperimenT_2.0.zip
Finding update package...
Opening update package...
Installing update...
assert failed: getprop("ro.product.device") == "
LT30p" || getprop("ro.build.product") == "LT30p"
|| getprop("ro.product.device") == "mint
" || getprop("ro.build.product") == "mint"
E:Error in /sdcard/XperimenT_2.0.zip
(Status 7)
Installation aborted.
Checked my prop.build and states LT30at.
every other rom i have tried gives same error.
Device info:
Android Version: 4.1.2
Kernal: 3.4.0-g3c4s0f6-00786-g0cc4bd6
Build#9.1.F.1.120
I have searched the forums and i guess i just don't understand how to fix this problem.
Thank you guys for any help provided. This forum is an asset to the community.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
This is a build of AICP for the Shield Tablet (WiFi Only) (wx_na_wf)
You need to have CWM recovery installed on your device See Here for instructions install CWM. Try this version of CWM when flashing
Or use PhilZ
Instructions on installing:
Make a backup of your current ROM (Optional but highly recommended)
Wipe --> Factory Reset (Data, Cache, and Dalvik Cache)
Flash ROM
Flash Gapps
Reboot
Downloads:
8/28/14 ROM
8/25/14 ROM
8/23/14 ROM
8/22/14 ROM
Gapps
Bugs
You tell me
Kernel Source
XDA:DevDB Information
AICP for Shield Tablet (WiFi Only), ROM for the Nvidia Shield Tablet
Contributors
joshuabg, Unjustified Dev For making the device tree compatible
ROM OS Version: 4.4.x KitKat
Based On: AOKP
Version Information
Status: Testing
Created 2014-08-22
Last Updated 2014-12-20
Reserved
Reserved
OK I done a full wipe factory reset/cache in the latest recovery then tryed flashing had an error saying
This package is wx_na_wf this device is shield tablet
Error status 7
I'm not much of a dev but will look through the build prop or meta data to see if its a simple name change?
MRobbo80 said:
OK I done a full wipe factory reset/cache in the latest recovery then tryed flashing had an error saying
This package is wx_na_wf this device is shield tablet
Error status 7
I'm not much of a dev but will look through the build prop or meta data to see if its a simple name change?
Click to expand...
Click to collapse
Just got to edit the META-INF/com/google/android/updater-script
proably have to change wx_na_wf to shieldtablet in line 2
I can do it and reupload the whole zip f you want
Edit: You could just erase that line
joshuabg said:
Just got to edit the META-INF/com/google/android/updater-script
proably have to change wx_na_wf to chield tablet in line 2
I can do it and reupload the whole zip f you want
Click to expand...
Click to collapse
That's OK I can do that give me 10 mins
MRobbo80 said:
That's OK I can do that give me 10 mins
Click to expand...
Click to collapse
OK, just edit the updater script, you should be able to just delete the second line without an issue.
Deleted second line and did not have any luck so this second line below just change
"wx_na_wf" to ,"shieldtablet "
").");
assert(getprop("ro.product.device") == "wx_na_wf" || getprop("ro.build.product") == "wx_na_wf" || abort("This package is for \"wx_na_wf\" devices; this is a \"" + getprop("ro.product.device") + "\".");
MRobbo80 said:
Deleted second line and did not have any luck so this second line below just change
"wx_na_wf" to ,"shieldtablet "
").");
assert(getprop("ro.product.device") == "wx_na_wf" || getprop("ro.build.product") == "wx_na_wf" || abort("This package is for \"wx_na_wf\" devices; this is a \"" + getprop("ro.product.device") + "\".");
Click to expand...
Click to collapse
What happened when you deleted the second line? It might be easier if you join the IRC channel so I can walk you though everything.
Deleted second line and did not have any luck so this second line below just change
"wx_na_wf" to ,"shieldtablet "
").");
assert(getprop("ro.product.device") == "wx_na_wf" || getprop("ro.build.product") == "wx_na_wf" || abort("This package is for \"wx_na_wf\" devices; this is a \"" + getprop("ro.product.device") + "\".");
So it should look like this
").");
assert(getprop("ro.product.device") == "shieldtablet" || getprop("ro.build.product") == "shieldtablet" || abort("This package is for \"shieldtabley\" devices; this is a \"" + getprop("ro.product.device") + "\".");
MRobbo80 said:
Deleted second line and did not have any luck so this second line below just change
"wx_na_wf" to ,"shieldtablet "
").");
assert(getprop("ro.product.device") == "wx_na_wf" || getprop("ro.build.product") == "wx_na_wf" || abort("This package is for \"wx_na_wf\" devices; this is a \"" + getprop("ro.product.device") + "\".");
So it should look like this
").");
assert(getprop("ro.product.device") == "shieldtablet" || getprop("ro.build.product") == "shieldtablet" || abort("This package is for \"shieldtabley\" devices; this is a \"" + getprop("ro.product.device") + "\".");
Click to expand...
Click to collapse
What happened when you flashed this?
Says
Installing
Installation aborted
MRobbo80 said:
Says
Installing
Installation aborted
Click to expand...
Click to collapse
Do you have zip signature verification checked?
No I did not, now I enabled that I tried flashing the original rom it seems to start of by going through the normal process of flashing, then stalls with the first error message to start with. When I change the second line (name change) in the update script to (shieldtablet) it the gives me an error saying the footer is in correct when trying to flash. Think it is a very simple fix to get this going but having a dipstick trying to help you is not much kop sorry m8
Hold on think I know what I done
@joshuabg You have to upload your recovery.img that compiled with it. I changed name because we shouldn't be using shieldtablet name in custom roms that's common to all versions.
Unjustified Dev said:
@joshuabg You have to upload your recovery.img that compiled with it. I changed name because we shouldn't be using shieldtablet name in custom roms that's common to all versions.
Click to expand...
Click to collapse
I'll upload that tommorow.
Unjustified Dev said:
@joshuabg You have to upload your recovery.img that compiled with it. I changed name because we shouldn't be using shieldtablet name in custom roms that's common to all versions.
Click to expand...
Click to collapse
My ROM is made for wx_na_wf. The bad thing about that is that aicp checks to see if the device is a wx_na_wf before it flashes. The stock os shows the device is a shieldtablet. So you have to remove that line in the updater-script.
sorry man got it sort of working got it to flash but stuck in a boot loop, now I can not enter recovery or so far get adb working
Here's my recovery.img that generated with AICP (wx_na_wf)
https://s.basketbuild.com/filedl/devs?dev=joshuabg&dl=joshuabg/wx_na_wf/recovery.img
Unjustified Dev said:
@joshuabg You have to upload your recovery.img that compiled with it. I changed name because we shouldn't be using shieldtablet name in custom roms that's common to all versions.
Click to expand...
Click to collapse
https://s.basketbuild.com/filedl/devs?dev=joshuabg&dl=joshuabg/wx_na_wf/recovery.img