I have a Dream running 1.5 and I want to download 1.6 (because for some reason I can't get it OTA) and it works perfectly until it installs the update and says "E: Failure at line 2: assert file_contains("SYSTEM:buildprop", "ro.build.fingerprint=tmobile/kila/dream/trout:1.5/CRC1/150275:user/ota-rel-keys,release-keys") == "true" l l file_contains("SYSTEM:build.prop", "ro.build.fingerprint=tmobile/kila/dream/trout:1Installation aborted." Any idea what's going on?
Hello.
I have exactly the same problem.
is there any way to update system without waiting for automatic update?
Greetings
hnnknr
Related
Hallo,
First my Englisch istn Perfectly but i have a Big Problem with my Wildfire.
Wildfire:
HBoot :6.01.002
Android: 2.1
I want to install on my phone WildPuzzleROM. But if I want to install it get the following error message:
Installing update...
Amend scripting (update-script) is no longer supported. Amend scripting was deprecated by Google in Android 1.5.
It was necessary to remove it when upgrading to the Clockwork Mod 3.0 Gingerbread based recovery . Please switch to Edify Scritping ( updater-script and update binary) to create working update zip packages
Insallation aborted
If I want to install CyanogenMod 7, it depends on"installing Update"
It does not happen any more.
I can also no longer in my old 2.1 system that is because this has been cleared. So I can only enter the recovery mode. This is, unfortunately, after a certain time if I do nothing.
I need your help because I am going on holiday on Thursday and I desperately need my Wildfire!
I hop you Can help me
Greeting BlackSnow
Can no one help me
I'm having the same problem
Hi guys, first post. Need a little bit of help here..firstly let me apologize if i have asked this in the wrong place...ive got no idea whats going on here sorry!
Ive got a Nexus S 3g..running version 2.3.6
The baseband version is I9023XXKF1 and kernel version 2.6.35.7-gf5f63ef
I had no problems rooting the phone and getting to the clockwork recovery, and after having downloaded the new b9 build of the ICS from http://forum.xda-developers.com/showpost.php?p=18622852&postcount=1 i put it on the sd card and then tried to load it but i got this message....
Finding update package...
Opening update package...
Installing update...
assert failed: get prop ("ro.product.device") =="crespo" l l getprop (ro.build.product") == "crespo" l l getprop ("ro.product.board") == "crespo"
E:Error in /sdcard/update.zip
(Status 7)
Installation aborted
Is there something i have done wrong, or something i need to do in order to get this running alright on my phone? Any help would be much appreciated
Cheers guys
Hello,
Well, I live in Brazil, and here, the SE xPeria Live w/ Walkmant has a modelname as WT19a, not WT19i as in other countries.
Now, I'm tryin' to install the 'Coconut' 46 or RC1 version of the Cyanogenmod, but in CWM, when i go to install the .zip, it says: "asser failed: getprop("ro.product.device")== "wt19a" || [............] getprop("ro.product.device")== "wt19i" || [............]
getprop("ro.build.product")== "coconut" || E: Error in /sdcard/update-cm-7.2.0-RC1-coconut-signed.zip // or "E: Error in /sdcard/cm_coconut_full-46.zip"
(Status 7)
Please, answer me!
Did you try to change the ro.product.model with https://play.google.com/store/apps/details?id=org.nathan.jf.build.prop.editor&hl=de
Btw: You need root.
halilgoecer said:
Did you try to change the ro.product.model with https://play.google.com/store/apps/details?id=org.nathan.jf.build.prop.editor&hl=de
Btw: You need root.
Click to expand...
Click to collapse
Thank You so much.. I think now it'll work.
Sent from my WT19i using xda premium
Also you can rename build prop in package zip to wt19a
zip will be actualize and it will also work
Hello,
I also have a WT19a, and I'm unable to install the recent CyanogenMod 7.2.0 RC1.
I've tried changing the build.prop on my phone and on the .zip file, and it still says that error: ""asser failed: getprop("ro.product.device")== "wt19a" || [............] getprop("ro.product.device")== "wt19i" || [............]
getprop("ro.build.product")== "coconut"
What, exactly, should I do?
Thanks in advance.-
Same problem
vbobarth said:
Hello,
Well, I live in Brazil, and here, the SE xPeria Live w/ Walkmant has a modelname as WT19a, not WT19i as in other countries.
Now, I'm tryin' to install the 'Coconut' 46 or RC1 version of the Cyanogenmod, but in CWM, when i go to install the .zip, it says: "asser failed: getprop("ro.product.device")== "wt19a" || [............] getprop("ro.product.device")== "wt19i" || [............]
getprop("ro.build.product")== "coconut" || E: Error in /sdcard/update-cm-7.2.0-RC1-coconut-signed.zip // or "E: Error in /sdcard/cm_coconut_full-46.zip"
(Status 7)
Click to expand...
Click to collapse
Hello!
I am having the exact same problem... I have been searching for a lot of hours.
When I find something, I'll post it here.
Xperia Play R800i
PLEASE HELP ME I tried to put cyanogenmod 9 on my xperia play R800i GSM version 2.3.4, i did all the steps by the guide but after reboot my device does not open. Sorry For Bad English.:crying::crying::crying:
TheVeteran said:
PLEASE HELP ME I tried to put cyanogenmod 9 on my xperia play R800i GSM version 2.3.4, i did all the steps by the guide but after reboot my device does not open. Sorry For Bad English.:crying::crying::crying:
Click to expand...
Click to collapse
Is your Xperia Play stuck on "Sony Ericsson" logo screen?
Try these instructions (steps 1, 2 and 3 only) - credits for vokal1992
http://forum.xda-developers.com/showthread.php?t=1762372
(the mentioned ROM is Android ICS, newer than your 2.3.4)
I would prefer to ask this in the [ROM][NIGHTLY] CyanogenMod 7.2-RC3+ for Huawei U8150 (June 11th) thread but I can't post in there since I am a noob.
I have a Huawei Ideos U8150 which I bought from aldi, locked to the virgin mobile network.
Today I decided to try and install a third-party firmware to get extra performance, because as stock the phone is very sluggish and drives me bonkers. Well... I have been at it for hours and have run into a hurdle that I can't get over. Hence me posting here.
I've tried with three different builds of Cyanogenmod 7.2, one build from june, the latest build, and the stable build.
I've tried to follow the instructions in the above mentioned thread as close as possible, had to do it slightly differently since I can't figure out how to
access the phone after doing the 3-button combo (some Android 1.0 driver I need to install, googled it, nothing specific to my phone).
I downloaded and installed z4root, and successfully obtained root access.
I duplicated the problem just before for the purposes of this post, attempting to install the Cyanogenmod 7.2 stable build.
I downloaded and installed clockworkmod rom manager, opened it, pressed Flash ClockworkMod Recovery to install that, and I think this might be part of my problem, it says: Confirm Phone Model and the only option is Huawei U8160, I figure close enough.
Let it do its thing, pops up with the root access confirmation screen, I hit Allow, then it says successfully flashed clockworkmod revoery! I hit OK, then I hit reboot into Recovery.
I let it do a backup, then I do wipe data/factory reset as well as wipe cache partition as per the above mentioned thread (except doing it inside clockwork recovery instead of doing it using the 3 button method), then hit install from sdcard zip, hit choose zip from sdcard, browse to the cyanogenmod zip file (cm-7.2.0-u8150.zip), say Yes, and it ****s itself. Great, I wiped all my data, now I have to set my phone up again from scratch with the stock rom. Grrrr!
The important part of the log:
Code:
-- Installing: /sdcard/cm-7.2.0-u8150.zip
mtd: successfully wrote block at fffffd6800000000
I:Set boot command "boot-recovery"
Finding update package...
I:Update location: /sdcard/cm-7.2.0-u8150.zip
Opening update package...
Installing update...
script aborted: assert failed: getprop("ro.product.device") == "u8150" || getprop("ro.build.product") == "u8150" || getprop("ro.product.board") == "u8150" ||
getprop("ro.product.device") == "ideos" || getprop("ro.build.product") == "ideos" || getprop("ro.product.board") == "ideos" ||
getprop("ro.product.device") == "U8150" || getprop("ro.build.product") == "U8150" || getprop("ro.product.board") == "U8150"
assert failed: getprop("ro.product.device") == "u8150" || getprop("ro.build.product") == "u8150" || getprop("ro.product.board") == "u8150" || getprop("ro.product.device") == "ideos" || getprop("ro.build.product") == "ideos" || getprop("ro.product.board") == "ideos" || getprop("ro.product.device") == "U8150" || getprop("ro.build.product") == "U8150" || getprop("ro.product.board") == "U8150"
E:Error in /sdcard/cm-7.2.0-u8150.zip
(Status 7)
Installation aborted.
result was NULL, message is: assert failed: install_zip("/sdcard/cm-7.2.0-u8150.zip")
I have put the whole log into a pdf as well as a doc and attached it.
In one of my several attempts to do this, I made sure I ran the "Fix Permissions" tool before trying to install the ROM in the hope that would make it work but it made no difference (same error).
I have no idea what I've done wrong, it seems like I have done everything correctly but it just won't work because it hates me. Maybe it's because it is a Virgin Mobile phone, maybe it is because clockworkmod thinks it is a U8160 when it is really a U8150? Who knows.
Hopefully somebody can think of some trick I can apply to try and get around this issue.
Sorry for such a long post, I just wanted to make sure I was as thorough as possible to make sure there isn't some tiny little thing I am doing wrong that is screwing it up for me.
Should I try installing Cyanogenmod 6.x.x tomorrow to see if it likes that any better?
Should I try downgrading to an earlier version of Clockworkmod ROM manager (if that is even possible)?
Is there some other straight-forward way of installing Cynaogenmod on my phone other than Clockworkmod?
Thanks very much,
VirginIdeos
CWM 5.0.2.7 used.
recruit said:
CWM 5.0.2.7 used.
Click to expand...
Click to collapse
So, I have to use an earlier version of clockwork mod? It's easy to install the latest version, but were do I download an earlier version from? Or are you just posting this for information?
Bump: Got it working. You have to flash Clockworkmod recovery version 3.0.2.7 onto the device, the latest will not work with the U8150 (should work with the U8160). I will throw up a how-to when I have enough posts.
But I'm still having issues: WiFi does not work, even though it is supposed to be fixed in Cyanogenmod 7.2. This is a pity, because it means I won't be able to stream video from my helmet cam to my Ideos without using the stock software pre-installed on the Ideos, which is very very sluggish. It already took me a lot of frigging around to be able to download the app for this from google play.
There is a wifi fix here: http://forum.xda-developers.com/showthread.php?t=1177650 but the link to download Salsa Slide Final is no longer active (I'm not sure that the files would work with the Ideos anyway) AND the wifi fix flashable zip won't work because it requires an early version of clockwork mod recovery which will not work on the Ideos U8150. ARGH!! And I'm not sure that the zip would flash correctly onto the Ideos anyway. The only way this could work would be for someone to update the zip so it works with clockworkmod recovery 3.0.2.7, and port the changes to the Ideos (if need be). Beyond my abilities, especially the porting part!
Even more frustratingly, there are people who are posting in the CM 7.2 Ideos U8150 thread whose wifi seems to be working just fine. Blast them!
Bump:
If I had known CWM9 was out for the U8150, I would not have even bothered with 7.2.
So I've installed CWM9 on my Ideos. Everything works great, including WiFi , so I'm rapt. It is a little more sluggish than 7.2 in some respects, but much smoother and snappier in others, and the UI and startup screen are a lot cooler.
As an aside, the ActionConnect app for connecting an Android phone to the new Ego 727 helmet camera doesn't work fully with the U8150. I can connect with the app and change the camera's settings, but when trying to view the live stream, the app exits. I had to trick the Google servers into thinking I had a Samsung Galaxy S in the first place to be able to download the app (even tricking them into thinking I had a Nexus S did not work). I've contacted tech support about this and the compatibility list issue. I'll throw up a separate thread including the APK for those who are having trouble downloading the app.
I need help as soon as it possible I will copy log here:Installing update...line 152 col 3:syntex error,unexpected BAD,expecting $end 1 parse errors
E:error in /sdcard/ROM/WFSY10.1-v0.2.zip
(Satus 6)
Instalation aborted.
mtd:successfully wrote block at c7e0400000000
Cosmodix said:
I need help as soon as it possible I will copy log here:Installing update...line 152 col 3:syntex error,unexpected BAD,expecting $end 1 parse errors
E:error in /sdcard/ROM/WFSY10.1-v0.2.zip
(Satus 6)
Instalation aborted.
mtd:successfully wrote block at c7e0400000000
Click to expand...
Click to collapse
You can ask it on my thread,I said in changelog that v0.2 couldn't boot,now you can use v0.3 which is perfectly working