Related
When i install the andriod 4.0 firmware on my hd2 everything works fine, but when i reboot the hd2 it wont start...
i stays at the black screen with the green HTC text.
infos:
- hd2
- mgldr
- android 4.0 beta10
any help?
Can you get it into bootloader
Have you installed Radio?
Counter1602 said:
When i install the andriod 4.0 firmware on my hd2 everything works fine, but when i reboot the hd2 it wont start...
i stays at the black screen with the green HTC text.
infos:
- hd2
- mgldr
- android 4.0 beta10
any help?
Click to expand...
Click to collapse
just a wrong partition size !!!
how much is your partition size !!
i believe u use tytungs rom !!
atleast have a partition size of 220 mb and 10mb partition for smooth functioning of an ics rom !!
good luck !
thank for the help i will try to use a bigger partition size thanks
if i use this tool (http://forum.xda-developers.com/showthread.php?t=1090783) do i have to reinstall MAGLDR and so on?
or will only the firmware and user data will get ereased?
so:
if u use this toll to change the partitions, can i simply install the rom after that?
or do i have to do something else?
edit: ok it worked thank you everyone
i got it work 190MB part and 44MB cache if u are not sure use this tool - HD2 Toolkit.
First - Task29
Then MAGLDR
Then repart
Then boot into CWM and AD recovery
Wipe data - advanced - wipe dalvik
Reboot
Then AD recovery and install rom
I have tried fornow 3 roms - all have common problem - videoplay is not smooth.
all other was smooth
whats task29 and how can i do it?
Use the HD2 Toolkit: http://forum.xda-developers.com/showthread.php?t=1090783
You can Task 29, repartition etc within this tool.
ok thanks, eberything works now
but videos are not smooth, any help??
hey guys !
well this is the first time i post something here ...
... i have gaga phone , huawei u8180 ! and i rooted it yesterday using ".unlockroot "
then , i downloaded and installed " titanium backup " and " clockworkmod " from google play ..
everything is okay ... i followed those johnnyparanoia /how-to-install-clockworkmod-on-huawei's steps and it's fine :victory:
but here's the prob :crying: i dnt know how to install Cyanogenmod7 ... is there a link or something to download it ?
i searched on Google and i found this
" 1) Open Rom Manager, the Recovery Flasher ClockworckMod Huawei u8160
* 2) In Rom Manager: Download Rom -> psyke83
* 3) Select all options.*
4) After downloading the ROM and Google Apps, you are about to have a dialogue "Pre-installation of the ROM." You can make a backup of the current ROM, erase and Data Cache (sometimes necessary), Wipe Dalvik Cache (recommended).
That's all! (The first start can be very slow) "
i can't do the step 2 +3 + 4 ... coz i dnt have wifi connection so it's not free , ... i'm asking if there's a link or something so i can make it via pc >.< ...
help .. :crying:
yosr dammak said:
hey guys !
well this is the first time i post something here ...
... i have gaga phone , huawei u8180 ! and i rooted it yesterday using ".unlockroot "
then , i downloaded and installed " titanium backup " and " clockworkmod " from google play ..
everything is okay ... i followed those johnnyparanoia /how-to-install-clockworkmod-on-huawei's steps and it's fine :victory:
but here's the prob :crying: i dnt know how to install Cyanogenmod7 ... is there a link or something to download it ?
i searched on Google and i found this
" 1) Open Rom Manager, the Recovery Flasher ClockworckMod Huawei u8160
* 2) In Rom Manager: Download Rom -> psyke83
* 3) Select all options.*
4) After downloading the ROM and Google Apps, you are about to have a dialogue "Pre-installation of the ROM." You can make a backup of the current ROM, erase and Data Cache (sometimes necessary), Wipe Dalvik Cache (recommended).
That's all! (The first start can be very slow) "
i can't do the step 2 +3 + 4 ... coz i dnt have wifi connection so it's not free , ... i'm asking if there's a link or something so i can make it via pc >.< ...
help .. :crying:
Click to expand...
Click to collapse
Offical CM7 ROMs can be downloaded in this website(Please replace # to .):www#cyanogenmod#com/devices
1.Open this website and choose your device.
2.Select the version you want to install from the File List.
3.If everything goes well,you should be getting a .zip file,that is the ROM packet.
4.Wait until the download process is done.Put this .zip file in your SDCard's root directory without unzip.
5.Make your phone to enter Recovery Mode.Wipe all user data,then Choose"Install from SDCard zip file",browse the ROM packet,choose "Install".
6.Have fun!
If u r Chinese and ur using Tencent QQ ,you can also add me to contact for more details.My account is 360999672
tutingheart said:
Offical CM7 ROMs can be downloaded in this website(Please replace # to .):www#cyanogenmod#com/devices
1.Open this website and choose your device.
2.Select the version you want to install from the File List.
3.If everything goes well,you should be getting a .zip file,that is the ROM packet.
4.Wait until the download process is done.Put this .zip file in your SDCard's root directory without unzip.
5.Make your phone to enter Recovery Mode.Wipe all user data,then Choose"Install from SDCard zip file",browse the ROM packet,choose "Install".
6.Have fun!
If u r Chinese and ur using Tencent QQ ,you can also add me to contact for more details.My account is 360999672
Click to expand...
Click to collapse
well , thanks but i installed cyanogenmod 7 )) it's okaaay ! but thanks for help anyway ) i just wonder , when i went to setting => about phone => i saw : model number :u8160 / android version : 2.3.7 ! but i thought u8160 is v2.2 not 2.3 ... ! so now when i wnt to search for an app i search u8160 app ?
and i can't add you " The user '360999672' was not found in the database. Please go back and correct this problem "
yosr dammak said:
well , thanks but i installed cyanogenmod 7 )) it's okaaay ! but thanks for help anyway ) i just wonder , when i went to setting => about phone => i saw : model number :u8160 / android version : 2.3.7 ! but i thought u8160 is v2.2 not 2.3 ... ! so now when i wnt to search for an app i search u8160 app ?
and i can't add you " The user '360999672' was not found in the database. Please go back and correct this problem "
Click to expand...
Click to collapse
Nope... just use it as you normally do... phone model is still 8180, but CM7 recognizes it as 8160 because it's the same hardware.
yosr dammak said:
well , thanks but i installed cyanogenmod 7 )) it's okaaay ! but thanks for help anyway ) i just wonder , when i went to setting => about phone => i saw : model number :u8160 / android version : 2.3.7 ! but i thought u8160 is v2.2 not 2.3 ... ! so now when i wnt to search for an app i search u8160 app ?
and i can't add you " The user '360999672' was not found in the database. Please go back and correct this problem "
Click to expand...
Click to collapse
Android apps' can or can't running well is only depend on your phone's common hardware(such as CPU,RAM,etc.) and your screen resolution,not your device's specific model.So you can choose Apps to download just in the way you do it before.
All CyanogenMod 7 ROMs are based on Android 2.3.7.
D i see ) !! thanks guyz for helping me ....
yosr dammak said:
hey guys !
well this is the first time i post something here ...
... i have gaga phone , huawei u8180 ! and i rooted it yesterday using ".unlockroot "
then , i downloaded and installed " titanium backup " and " clockworkmod " from google play ..
everything is okay ... i followed those johnnyparanoia /how-to-install-clockworkmod-on-huawei's steps and it's fine :victory:
but here's the prob :crying: i dnt know how to install Cyanogenmod7 ... is there a link or something to download it ?
i searched on Google and i found this
" 1) Open Rom Manager, the Recovery Flasher ClockworckMod Huawei u8160
* 2) In Rom Manager: Download Rom -> psyke83
* 3) Select all options.*
4) After downloading the ROM and Google Apps, you are about to have a dialogue "Pre-installation of the ROM." You can make a backup of the current ROM, erase and Data Cache (sometimes necessary), Wipe Dalvik Cache (recommended).
That's all! (The first start can be very slow) "
i can't do the step 2 +3 + 4 ... coz i dnt have wifi connection so it's not free , ... i'm asking if there's a link or something so i can make it via pc >.< ...
help .. :crying:
Click to expand...
Click to collapse
please can u inbox me the link 2 d unlock root u used cos i also have an etisalat gaga n hv been trying 2 unlock it
yosr dammak said:
hey guys !
well this is the first time i post something here ...
... i have gaga phone , huawei u8180 ! and i rooted it yesterday using ".unlockroot "
then , i downloaded and installed " titanium backup " and " clockworkmod " from google play ..
everything is okay ... i followed those johnnyparanoia /how-to-install-clockworkmod-on-huawei's steps and it's fine :victory:
but here's the prob :crying: i dnt know how to install Cyanogenmod7 ... is there a link or something to download it ?
i searched on Google and i found this
" 1) Open Rom Manager, the Recovery Flasher ClockworckMod Huawei u8160
* 2) In Rom Manager: Download Rom -> psyke83
* 3) Select all options.*
4) After downloading the ROM and Google Apps, you are about to have a dialogue "Pre-installation of the ROM." You can make a backup of the current ROM, erase and Data Cache (sometimes necessary), Wipe Dalvik Cache (recommended).
That's all! (The first start can be very slow) "
i can't do the step 2 +3 + 4 ... coz i dnt have wifi connection so it's not free , ... i'm asking if there's a link or something so i can make it via pc >.< ...
help .. :crying:
Click to expand...
Click to collapse
Download cm7 in zip file and install from recovery
First - Backup
Last - Wipe data, wipe cache
Advance - wipe dalvik cache, Go back
Install zip from sd card - Place in your Rom
Reboot
Also may inastall Gapps same way
Hello I tried to port many roms from galaxy mini,wich were stock based, and everytime I got bootloop(Phone stays stuck at Galaxy Fit screen).
I followed this guide:Take a stock based rom from fit as base,delete from /system:/app,/framework,/media,/fonts and replace with the ones from the rom I want to port,pack them with winrar as .zip and flash but BOOTLOOP (
Please help
hi bro ... now tell me exactly what do you want to do ... get back you phone works normaly or going to repair it with the same rom already flashed ???
anonymooos said:
hi bro ... now tell me exactly what do you want to do ... get back you phone works normaly or going to repair it with the same rom already flashed ???
Click to expand...
Click to collapse
No no don't understand me wrong the phone is not bricked,I just want to know why I got bootloop everytime I try to port a stock based rom,on CM7 based roms works very good.
gabyif said:
No no don't understand me wrong the phone is not bricked,I just want to know why I got bootloop everytime I try to port a stock based rom,on CM7 based roms works very good.
Click to expand...
Click to collapse
try this http://forum.xda-developers.com/showthread.php?t=2091730
and let me know if its this your procedur to install based roms
anonymooos said:
try this http://forum.xda-developers.com/showthread.php?t=2091730
and let me know if its this your procedur to install based roms
Click to expand...
Click to collapse
?? that's a link to miui rc3 from galaxy y
it's almost the same for glx fit .
- put the file zip on your sd card
-get on recovery mod
-wipe data
-wipe cach
-wipe delvik ...
-install zip from sd card option
-wait until it's done
-reboot system
anonymooos said:
it's almost the same for glx fit .
- put the file zip on your sd card
-get on recovery mod
-wipe data
-wipe cach
-wipe delvik ...
-install zip from sd card option
-wait until it's done
-reboot system
Click to expand...
Click to collapse
) man I know to flash a rom BUT I'am asking for a guide for porting roms from mini wich will not give me a bootloop,I know about feras's guide but when flash the rom in recovery it give me a error like (status 6) ??
No no no
You are doing it completely wrong.
For porting you need a correspoding base, as in for cm7 use fit's cm7 only,not stock based rom!
For cm9 and cm10/10.1 use our fit's CM9/10/10.1 firmwares's as base. Using stock for porting cm7 wont do the trick.
And you need to need to change kernel too..or else you are putting your phone's hardware at stake!
Check the pack compression too..
secondly, dont do that delete base bla bla method..porting GB roms from mini is damn easy, just open the base and port in winrar side by side and start drag-drop from base into port..
Understand what you are doing first.
Mini and fit only defer in camera,lights,hardware keys and something more.
Basically, if you pick up any rom from mini you can simply flash it on fit without making any single change in the rom (just change the kernel as a precaution)
But you'll see a lot of bugs like hardware keys not working,no camera wifi bluetooth etc
So check out feras's guide and make changes one by one and flash and see what changes you notice, you'll understand what those files do.
Oh and don't try to port from 5570i..it wont ever boot
Hello first of all are new to the forum, however, are registered on the forum androdiani but are Adriano pleasure I have a galaxy s advance i9070P I tried to install the hybrid doing this procedure:
TEE replace the files to rom ..
Reboot the phone into recovery and do format / system
istallo the rom HYBRID 1.0.2
and restart
On restart, however I check the little man dell'Android as if the rom was leaving but in reality it always restarts .. I tried to make them a wipe .. but nothing .. so I installed the 1.0.4 above but does the same problem ... help me please?
P.S HO KERNEL AS E-COCORE 6.2
please suggest me the best and the latest custom rom for htc chacha which works with no proplems
I have been tired from searching for it
ModaAli said:
please suggest me the best and the latest custom rom for htc chacha which works with no proplems
I have been tired from searching for it
Click to expand...
Click to collapse
I think just because you're lazy one.
Won't more than 30s searching for the latest version, but not sure if it's the best for you.
This's my daily rom: http://forum.xda-developers.com/showthread.php?t=2767332
And i'm sure you won't live without this: http://forum.xda-developers.com/showthread.php?t=1716124 (I used INT2EXT4, not INT2EXT4+)
If you need Line Break, flash this: http://forum.xda-developers.com/showthread.php?t=2820659
shinjitsunokami said:
I think just because you're lazy one.
Won't more than 30s searching for the latest version, but not sure if it's the best for you.
This's my daily rom: http://forum.xda-developers.com/showthread.php?t=2767332
And i'm sure you won't live without this: http://forum.xda-developers.com/showthread.php?t=1716124 (I used INT2EXT4, not INT2EXT4+)
If you need Line Break, flash this: http://forum.xda-developers.com/showthread.php?t=2820659
Click to expand...
Click to collapse
thanks for help
and thanks for Respect me
yeah, CM11 looks so good. i also use it for daily.
Modded Stock Rom
ModaAli said:
please suggest me the best and the latest custom rom for htc chacha which works with no proplems
I have been tired from searching for it
Click to expand...
Click to collapse
Dear ModaAli,
Have tried many Custom Roms (cm7, cm9.... till cm11 and also SuperOSR), on my HTC Chacha. Most of the Roms work, few are good and few have some bugs. All the mentioned ROMS are better in many aspects comparing to Stock but are not optimal bugfree or features when compare to Stock.
Thus, after reading a lot (doing since last 1 and half a year), finally, tried and build a MOD of stock rom with the help of DSIXDA Kitchan.
Primary aim was Stock (and Sense) features plus internal space. With the above Modded Rom, till date, I,m happy of the output. If you wish can provide you the link to that ROM. You can PM me for that.
My Rom is based on Stock (with Sense) Rom :
RUU : India 1.20.720.1
Android Version: 2.3.3 (Gingerbread)
Kernel: 2.6.35.10
Language Support: English
And is ..
Rooted
Init.d support
Busybox
and presently using it with INT2EXT (by CronMod) mod on a 768MB ext2 type partition. Thus have ample space to run WhatsApp, Viber, WSP Office, Rom Manager, Battery Meter, Twitter, Facebook, FX file manager and few more apps. But still have 300+ Mb internal memory free (which is actually ext-sd swapped with INT2EXT)
rickyjsharma said:
Dear ModaAli,
Have tried many Custom Roms (cm7, cm9.... till cm11 and also SuperOSR), on my HTC Chacha. Most of the Roms work, few are good and few have some bugs. All the mentioned ROMS are better in many aspects comparing to Stock but are not optimal bugfree or features when compare to Stock.
Thus, after reading a lot (doing since last 1 and half a year), finally, tried and build a MOD of stock rom with the help of DSIXDA Kitchan.
Primary aim was Stock (and Sense) features plus internal space. With the above Modded Rom, till date, I,m happy of the output. If you wish can provide you the link to that ROM. You can PM me for that.
My Rom is based on Stock (with Sense) Rom :
RUU : India 1.20.720.1
Android Version: 2.3.3 (Gingerbread)
Kernel: 2.6.35.10
Language Support: English
And is ..
Rooted
Init.d support
Busybox
and presently using it with INT2EXT (by CronMod) mod on a 768MB ext2 type partition. Thus have ample space to run WhatsApp, Viber, WSP Office, Rom Manager, Battery Meter, Twitter, Facebook, FX file manager and few more apps. But still have 300+ Mb internal memory free (which is actually ext-sd swapped with INT2EXT)
Click to expand...
Click to collapse
can you upload your ROM mate, best regards
Will Try to Upload today
swashie said:
can you upload your ROM mate, best regards
Click to expand...
Click to collapse
Dear Swashie,
Will upload today and will provide you the google drive link (hope this kind of links are valid).
Regards,
Ricky
Following is the link . . .
https://drive.google.com/file/d/0B8BfFAtUXk3iaUl0U0FpRUVXUm8/view?usp=sharing
Further, flash the above with CWM after Factory Reset, Clear Dalvik (I prefer formatting Boot, System, Data & ext-sd before flashing any rom for best results). Let it boot once. Then partition and format your ext-sd with your choice of size (mine is 768MB) to ext2 type system. Then reboot and flash the INT2EXT.zip by CronMod. This will enable internal memory to the size of partition you have chosen.
Revert for any help and will try to provide the best what I can.
Regards,
Ricky.
My friend has aChaCha with 2.5.3 version or something similar. Which ROM should i update to which would be stable for a normal user and maintenance free.
Is it easy to install ROMs in HTC. I have flashing experience only with Samsung
Sent from my GT-N7100 using Tapatalk
I can't get cronmod to work with it. any Ideas? I followed your directions below. I was running link2sd on my stock rom, but I formatted and reinstalled several times. I'm lost...
rickyjsharma said:
Dear Swashie,
Will upload today and will provide you the google drive link (hope this kind of links are valid).
Regards,
Ricky
Following is the link . . .
https://drive.google.com/file/d/0B8BfFAtUXk3iaUl0U0FpRUVXUm8/view?usp=sharing
Further, flash the above with CWM after Factory Reset, Clear Dalvik (I prefer formatting Boot, System, Data & ext-sd before flashing any rom for best results). Let it boot once. Then partition and format your ext-sd with your choice of size (mine is 768MB) to ext2 type system. Then reboot and flash the INT2EXT.zip by CronMod. This will enable internal memory to the size of partition you have chosen.
Revert for any help and will try to provide the best what I can.
Regards,
Ricky.
Click to expand...
Click to collapse
Kevinreid1 said:
I can't get cronmod to work with it. any Ideas? I followed your directions below. I was running link2sd on my stock rom, but I formatted and reinstalled several times. I'm lost...
Click to expand...
Click to collapse
Dear Kevin,
Please repeat the following steps : -
01. Boot into Recovery.
02. Format Boot, System, Data & ext-sd.
03. Flash the modified image you downloaded from the link provided by me.
04. Boot the Chacha (should be running & up)
05. Power-off
06. Delete the ext-sd partition and repartition as EXT2
07. Reboot into recovery. Flash the recovery INT2EXT.ZIP (should complete without errors)
08. Reboot
09. Check the working of INT2EXT.ZIP.
It should work. If during the above process, you encounter any error, revert back with the exact error to enable assistance/help.
B/Rgds,
RJS
CM11 For the win
dheon5 said:
CM11 For the win
Click to expand...
Click to collapse
I tried several custom ROMs. One of the best concerning battery and memory usage was SuperOSR 2.5, but it's only Android 2.x.
For Android 4 i prefered CM 10.1 since you don't have much RAM with CM11.
However I changed back to the standard ROM now since I bought the Chacha because of its keyboard, and none of the custom ROMs had a good keyboard support. There even where problems when using the keys for dialing, re-dialing, entering numbers during a call, searching for apps in the list etc. Plus that you can't use your Facebook-Button (for flashlight in my case).
I don't even miss Android 4 - it seems that all apps I need are available for 2.3.5 so far. Latest apps will have problems with this screen anyway.
SD Card Missing or not mounted
rickyjsharma said:
Dear Kevin,
Please repeat the following steps : -
01. Boot into Recovery.
02. Format Boot, System, Data & ext-sd.
03. Flash the modified image you downloaded from the link provided by me.
04. Boot the Chacha (should be running & up)
05. Power-off
06. Delete the ext-sd partition and repartition as EXT2
07. Reboot into recovery. Flash the recovery INT2EXT.ZIP (should complete without errors)
08. Reboot
09. Check the working of INT2EXT.ZIP.
It should work. If during the above process, you encounter any error, revert back with the exact error to enable assistance/help.
B/Rgds,
RJS
Click to expand...
Click to collapse
So is there a way to use this with sd card? I formatted ext2 has primary should I have made it a logical drive instead also have 100mb linux swap I think it's logical.
Also unrelated to the above is there any way to update to play store and play services to use hangouts or is 2.3 android stuck without play services? it downloads but says its not able to install. I said unrelated but maybe it is related to me using the ext2 as primary instead of logical...
BT carkit call problem...
This ROM is great but for me calls with my bluetooth carkit doesn't work.
I can pair devices, sync contacts, make a call but after that I hear only some noise.
Is there any fix or workaround?
thx
really
really its a good device for use roughly.