Related
Hey, please spare some time for me as I really want this to be fixed
I am using a Mini Pro running on Stock ROM and Kernal
It is rooted and has CWM 5.0.2.7-nAa
I recently downloaded Cyanogenmod 9.1 for my xperia mini pro (Sk17i) (Mango)
I went through the following steps to install it:
Did data/factory wipe
Wiped cache partition
Wiped Dalvik cache
Wiped battery stats
Then i proceeded to install .zip from sd card and so on until i located the .zip which was on my sd cards root directory
put it to install and i end up with this
--Installing: /sdcard/cm9.1.0-mango.zip
Finding update package
Opening update package
Installing update
assert failed: getprop ("ro.product.device") == "SK17i" | | getprop ("ro.build.product") == "SK17i" | | getprop ("ro.product.device") == "SK17a" | | getprop ("ro.build.product") == "SK17a" | | getprop ("ro.product.device") == "mango" | | getprop ("ro.build.product") == "mango"
E:Error in /sdcard/cm-9.1.0-mango.zip
(Status 7)
Installation aborted.
I want to know why i am getting this
I tried CM10 and 7 for my device and i get the same errors
Please give me instructions on what to do in the most simplest ways possible, you can give links to tutorials but i may find them hard because most seem complicated to me so please try and tell me in your own simple words what to do, I am a complete noob at this
I want to Install Cyanogenmods Rom so that i can install a firmware that makes the music volume more precise and makes the phone faster
I need all the help I can so please
Any additional info you want, just ask
Naweed Reza said:
Hey, please spare some time for me as I really want this to be fixed
I am using a Mini Pro running on Stock ROM and Kernal
It is rooted and has CWM 5.0.2.7-nAa
I recently downloaded Cyanogenmod 9.1 for my xperia mini pro (Sk17i) (Mango)
I went through the following steps to install it:
Did data/factory wipe
Wiped cache partition
Wiped Dalvik cache
Wiped battery stats
Then i proceeded to install .zip from sd card and so on until i located the .zip which was on my sd cards root directory
put it to install and i end up with this
--Installing: /sdcard/cm9.1.0-mango.zip
Finding update package
Opening update package
Installing update
assert failed: getprop ("ro.product.device") == "SK17i" | | getprop ("ro.build.product") == "SK17i" | | getprop ("ro.product.device") == "SK17a" | | getprop ("ro.build.product") == "SK17a" | | getprop ("ro.product.device") == "mango" | | getprop ("ro.build.product") == "mango"
E:Error in /sdcard/cm-9.1.0-mango.zip
(Status 7)
Installation aborted.
I want to know why i am getting this
I tried CM10 and 7 for my device and i get the same errors
Please give me instructions on what to do in the most simplest ways possible, you can give links to tutorials but i may find them hard because most seem complicated to me so please try and tell me in your own simple words what to do, I am a complete noob at this
I want to Install Cyanogenmods Rom so that i can install a firmware that makes the music volume more precise and makes the phone faster
I need all the help I can so please
Any additional info you want, just ask
Click to expand...
Click to collapse
Seems to me u probably have a device not "introducing" itself properly Or maybe it's build...
Maybe try the other way around and it right since the beginning.
Get yourself first:
- stock kernel & s/w rreinstalled (via PC Companion)
- since this is sk17i - unlock ur bootloader via official Sony way: http://unlockbootloader.sonymobile.com/ (yet first watch the tutorial form Mihahn: http://forum.xda-developers.com/showthread.php?p=31376248#post31376248 )
- get urself latest FlashTool and install it (http://androxyde.github.com/), use it to root ur phone -> http://forum.xda-developers.com/showthread.php?p=30441163#post30441163
-
- go in very details through here http://forum.xda-developers.com/showthread.php?t=1629334 and
1. download Kernel TFT (appropriate one) and flash it using flash tool (and guess what... here is picture guide by Mihahn: http://forum.xda-developers.com/showthread.php?t=1879982)
2. upload CM9-3 to sd card and try again with CWMRec/Flashtool mode install (depending whether u download .zip or .tft with ROM)
and read read read before u do smthng bad to ur small friend.
PsychoFish81 said:
Seems to me u probably have a device not "introducing" itself properly Or maybe it's build...
Maybe try the other way around and it right since the beginning.
Get yourself first:
- stock kernel & s/w rreinstalled (via PC Companion)
- since this is sk17i - unlock ur bootloader via official Sony way: http://unlockbootloader.sonymobile.com/ (yet first watch the tutorial form Mihahn: http://forum.xda-developers.com/showthread.php?p=31376248#post31376248 )
- get urself latest FlashTool and install it (http://androxyde.github.com/), use it to root ur phone -> http://forum.xda-developers.com/showthread.php?p=30441163#post30441163
-
- go in very details through here http://forum.xda-developers.com/showthread.php?t=1629334 and
1. download Kernel TFT (appropriate one) and flash it using flash tool (and guess what... here is picture guide by Mihahn: http://forum.xda-developers.com/showthread.php?t=1879982)
2. upload CM9-3 to sd card and try again with CWMRec/Flashtool mode install (depending whether u download .zip or .tft with ROM)
and read read read before u do smthng bad to ur small friend.
Click to expand...
Click to collapse
Thanks for replying
I will try it out and let you know how it went
I dont get the first bit about getting a stock kernal and s/w reinstalled
Does that basically mean unroot my phone or something
And whats s/w (Sorry for being a complete noob)
More doubts, really sorry
PsychoFish81 said:
Seems to me u probably have a device not "introducing" itself properly Or maybe it's build...
Maybe try the other way around and it right since the beginning.
Get yourself first:
- stock kernel & s/w rreinstalled (via PC Companion)
- since this is sk17i - unlock ur bootloader via official Sony way: http://unlockbootloader.sonymobile.com/ (yet first watch the tutorial form Mihahn: http://forum.xda-developers.com/showthread.php?p=31376248#post31376248 )
- get urself latest FlashTool and install it (http://androxyde.github.com/), use it to root ur phone -> http://forum.xda-developers.com/showthread.php?p=30441163#post30441163
-
- go in very details through here http://forum.xda-developers.com/showthread.php?t=1629334 and
1. download Kernel TFT (appropriate one) and flash it using flash tool (and guess what... here is picture guide by Mihahn: http://forum.xda-developers.com/showthread.php?t=1879982)
2. upload CM9-3 to sd card and try again with CWMRec/Flashtool mode install (depending whether u download .zip or .tft with ROM)
and read read read before u do smthng bad to ur small friend.
Click to expand...
Click to collapse
I am so sorry if I am bothering you or anything but I was going through the links, very handy and simple, and i came across this in the last link you have put about downlaoding a kernal .TFT
When reading through it says
Now you are ready to install a custom rom/kernel.
Let's start:
You go to development section and choose a rom you want for your device. You download the rom and the kernel for your device (make sure it is the right for yours! Sometimes the kernel is included in the installation zip file of the rom.
Now you have the boot.img and the rom
Click to expand...
Click to collapse
Now where is the Development section?
Where do i find the Boot.img?
What is the proper one for my sk17i?
I have downloaded CM9.1 for Mango from the cm official website and there is a boot.img inside the zip, should i just extract the boot.img out and keep it near the .zip file? and should i use this instead of the mini cm provided?
I really appreciate the links you have given and hope all my doubts can be cleared for me to actually start the process
Will hit that thanks button if it is a success :good:
Naweed Reza said:
Thanks for replying
I will try it out and let you know how it went
I dont get the first bit about getting a stock kernal and s/w reinstalled
Does that basically mean unroot my phone or something
And whats s/w (Sorry for being a complete noob)
Click to expand...
Click to collapse
S/W = Software.
To install stock software, even if ur phone is in bootloop, u may use PC Companion.
1. Start mobile in Flash mode (BACK/VOL+/- pressed when phone turned off and connecting usb cable + PC Companion enabled)
2. Agree on loosing all data Choose model (be careful -u20 and sk17i and sk17a are all mini pro, use hardware version marking)
3. allow it to work - it will download stock software for ur mini pro
Effect: unroot stock phone. U can root it again with FlashTool or one of root methods (for sk17i I believe so called zergRush does the job - search forums or gogole it )
Afterwards proceed with instructions for
1. Rooting
2. Unlocking bootloader
3. Reflashing phone with custom kernel and custom ROM
BE ADVISED: Above "root/unlock bootloader" actions usually void ur warranty. Be sure what u r doing, read thoroughly steps to not brick ur phone and do not be scared if bootloop happens - just find a way to enter flash mode again and use other .tft/ROM
OR - if u have already unlocked bootloader - simply download appropriate .tft file and flash it on ur phone using FlashTool. (the so called generic sk17i ROM has been provided in .tft format here: http://rumah-android.com/official-xperia-mini-pro-sk17i-4-1-b-0-431-firmware-ics-4-0-4.html)
U mighgt want to see through some of posts here to reduce ur noobishness http://forum.xda-developers.com/showthread.php?t=471521
And use custom kernels/stock roms known for their stability in latest release/nigh release (search for xda forum threads).
PsychoFish81 said:
Seems to me u probably have a device not "introducing" itself properly Or maybe it's build...
Maybe try the other way around and it right since the beginning.
Get yourself first:
- stock kernel & s/w rreinstalled (via PC Companion)
- since this is sk17i - unlock ur bootloader via official Sony way: http://unlockbootloader.sonymobile.com/ (yet first watch the tutorial form Mihahn: http://forum.xda-developers.com/showthread.php?p=31376248#post31376248 )
- get urself latest FlashTool and install it (http://androxyde.github.com/), use it to root ur phone -> http://forum.xda-developers.com/showthread.php?p=30441163#post30441163
-
- go in very details through here http://forum.xda-developers.com/showthread.php?t=1629334 and
1. download Kernel TFT (appropriate one) and flash it using flash tool (and guess what... here is picture guide by Mihahn: http://forum.xda-developers.com/showthread.php?t=1879982)
2. upload CM9-3 to sd card and try again with CWMRec/Flashtool mode install (depending whether u download .zip or .tft with ROM)
and read read read before u do smthng bad to ur small friend.
Click to expand...
Click to collapse
PsychoFish81 said:
S/W = Software.
To install stock software, even if ur phone is in bootloop, u may use PC Companion.
1. Start mobile in Flash mode (BACK/VOL+/- pressed when phone turned off and connecting usb cable + PC Companion enabled)
2. Agree on loosing all data Choose model (be careful -u20 and sk17i and sk17a are all mini pro, use hardware version marking)
3. allow it to work - it will download stock software for ur mini pro
Effect: unroot stock phone. U can root it again with FlashTool or one of root methods (for sk17i I believe so called zergRush does the job - search forums or gogole it )
Afterwards proceed with instructions for
1. Rooting
2. Unlocking bootloader
3. Reflashing phone with custom kernel and custom ROM
BE ADVISED: Above "root/unlock bootloader" actions usually void ur warranty. Be sure what u r doing, read thoroughly steps to not brick ur phone and do not be scared if bootloop happens - just find a way to enter flash mode again and use other .tft/ROM
OR - if u have already unlocked bootloader - simply download appropriate .tft file and flash it on ur phone using FlashTool. (the so called generic sk17i ROM has been provided in .tft format here: http://rumah-android.com/official-xperia-mini-pro-sk17i-4-1-b-0-431-firmware-ics-4-0-4.html)
U mighgt want to see through some of posts here to reduce ur noobishness http://forum.xda-developers.com/showthread.php?t=471521
And use custom kernels/stock roms known for their stability in latest release/nigh release (search for xda forum threads).
Click to expand...
Click to collapse
Alright, thanks alot
Will get to it
I cant just plug my phone in and use the repair option from support zone?
It says that will erase all internal memory by replacing the software
So should I use that method?
And yeah, ive experience bootloop before so im fine and know what to do
And after all this is done and i get everything tis fine to restore my apps and studd using titanium right?
Naweed Reza said:
Now where is the Development section?
Where do i find the Boot.img?
What is the proper one for my sk17i?
I have downloaded CM9.1 for Mango from the cm official website and there is a boot.img inside the zip, should i just extract the boot.img out and keep it near the .zip file? and should i use this instead of the mini cm provided?
I really appreciate the links you have given and hope all my doubts can be cleared for me to actually start the process
Will hit that thanks button if it is a success :good:
Click to expand...
Click to collapse
Development Section is a section of XDA forum, where crazy programmers deliver their kernels and ROMS...
This link is in Development Section, I believe the CM u r looking for:
http://forum.xda-developers.com/showthread.php?t=1629334
Be advised - above CM requires custom kernel sk17i, it says it in Requirements in above link -> http://forum.xda-developers.com/showthread.php?p=25550442
If u succeed to unlock bootloader, it gets pretty simple, simpler than in Mihahn guide.
1. Given u have bootloader unlocked: using FlashTool u flash kernel (the .tft file) - thus u won't have to care about separate boot.img / .sin files flashing, they are incorporated in .tft thing.
2, If it suceeds - using flashtool u reset to recovery
3. USING CWM options - u mount ur USB storage
4. U put from ur PC zip with CM9
5. Unmount USB storage
6. Wipe all data as it says in ROM thread - otherwise u risk **** to hit the fan
7. Update from .zip, point to zip on sdcard
8.Relax
9. Get cofee
10. Relax
11. Watch it progress
12. Relax
13. Pray for best
14. After it finishes - reboot to normal. Be advised - first reboot after flashing ROM is always long, linux + ROM does automagic stuff
Short who's who:
kernel; linux kernel, da animal that is engine of subsequent android devices (i.e. kernel with Ice Cream Sandwich or Jelly Beans Adnroid releases) U NEED CAREFULLY CHOOSE THE ONE APPRIOPRIATE FOR UR DEVICE
ROM - closest to operating system u get on mobile devices, u might have different ROMs wortking on specific kernel
CWM - clockworkmode recovery - ur last resort if **** hits the fan to change ROM without reflashing kernel
I hope I got this as simple as I could... Sorry, I was former mobile s/w developer, such stuff is just usual for me, my stock u20i software didn't last 24h - I just immediately reflashed it co CM6, later to CM7 - just to have some options not available in stock rom connected to power management and application management.
EDIT: Combining answers
Naweed Reza said:
Alright, thanks alot
Will get to it
I cant just plug my phone in and use the repair option from support zone?
It says that will erase all internal memory by replacing the software
So should I use that method?
And yeah, ive experience bootloop before so im fine and know what to do
And after all this is done and i get everything tis fine to restore my apps and studd using titanium right?
Click to expand...
Click to collapse
Yes.
Generic ROM / Repair options brings u back to stock sk17i SE ROM. I dont remeber if repair option uploaded latest update, if yes - u might still have to use generic sk17i tft thing.
With restoring option - to be honest I didn't test it. It didn't worked well for me on CM6 and CM7 upgrade, yet possibly I did not all the things right. Still, if u have backed up apps and data on sdcard, it might be possible - please check it before reflashing ROMS (just root, install latest titanium backup and simply test the stuff).
Good luck on ur journey to reflash...
PsychoFish81 said:
Development Section is a section of XDA forum, where crazy programmers deliver their kernels and ROMS...
This link is in Development Section, I believe the CM u r looking for:
http://forum.xda-developers.com/showthread.php?t=1629334
Be advised - above CM requires custom kernel sk17i, it says it in Requirements in above link -> http://forum.xda-developers.com/showthread.php?p=25550442
If u succeed to unlock bootloader, it gets pretty simple, simpler than in Mihahn guide.
1. Given u have bootloader unlocked: using FlashTool u flash kernel (the .tft file) - thus u won't have to care about separate boot.img / .sin files flashing, they are incorporated in .tft thing.
2, If it suceeds - using flashtool u reset to recovery
3. USING CWM options - u mount ur USB storage
4. U put from ur PC zip with CM9
5. Unmount USB storage
6. Wipe all data as it says in ROM thread - otherwise u risk **** to hit the fan
7. Update from .zip, point to zip on sdcard
8.Relax
9. Get cofee
10. Relax
11. Watch it progress
12. Relax
13. Pray for best
14. After it finishes - reboot to normal. Be advised - first reboot after flashing ROM is always long, linux + ROM does automagic stuff
Short who's who:
kernel; linux kernel, da animal that is engine of subsequent android devices (i.e. kernel with Ice Cream Sandwich or Jelly Beans Adnroid releases) U NEED CAREFULLY CHOOSE THE ONE APPRIOPRIATE FOR UR DEVICE
ROM - closest to operating system u get on mobile devices, u might have different ROMs wortking on specific kernel
CWM - clockworkmode recovery - ur last resort if **** hits the fan to change ROM without reflashing kernel
I hope I got this as simple as I could... Sorry, I was former mobile s/w developer, such stuff is just usual for me, my stock u20i software didn't last 24h - I just immediately reflashed it co CM6, later to CM7 - just to have some options not available in stock rom connected to power management and application management.
EDIT: Combining answers
Yes.
Generic ROM / Repair options brings u back to stock sk17i SE ROM. I dont remeber if repair option uploaded latest update, if yes - u might still have to use generic sk17i tft thing.
With restoring option - to be honest I didn't test it. It didn't worked well for me on CM6 and CM7 upgrade, yet possibly I did not all the things right. Still, if u have backed up apps and data on sdcard, it might be possible - please check it before reflashing ROMS (just root, install latest titanium backup and simply test the stuff).
Good luck on ur journey to reflash...
Click to expand...
Click to collapse
Thanks,
Using SUS right now and its repairing, hoping for the best, I only lose contacts messages and calender
The rest is backed up with titanium
I will inform you when im donw through the whole process
And do i have to install CM Mini?
Or i can choose any Cyanogenmod for my phone? (THe Sk17i ones from the official website) or i have to only use the one you provided
Naweed Reza said:
Thanks,
Using SUS right now and its repairing, hoping for the best, I only lose contacts messages and calender
The rest is backed up with titanium
I will inform you when im donw through the whole process
And do i have to install CM Mini?
Or i can choose any Cyanogenmod for my phone? (THe Sk17i ones from the official website) or i have to only use the one you provided
Click to expand...
Click to collapse
U can choose any CyanogenMod marked as suitable for ur phone (xperia mini pro, sk17i), yet
- PAY ATTENTION TO REQUIREMENTS: rooting, unlocking bootloader, which kernel version etc.
- READ SEVERAL TIMES BEFORE EXECUTING! Very important... developer put most important informations in posts, yet specific issuies are reproted and solved as froum thread goes by
Step 1 is done
Okay, I have Restored the phone to factory using SUS
But check this link out and see if i can flash this CM instead
http://wiki.cyanogenmod.org/index.php?title=Install_CM_for_mango
Unlocked bootloader
PsychoFish81 said:
U can choose any CyanogenMod marked as suitable for ur phone (xperia mini pro, sk17i), yet
- PAY ATTENTION TO REQUIREMENTS: rooting, unlocking bootloader, which kernel version etc.
- READ SEVERAL TIMES BEFORE EXECUTING! Very important... developer put most important informations in posts, yet specific issuies are reproted and solved as froum thread goes by
Click to expand...
Click to collapse
Okay, sorry it took long, but i just Unlocked my bootleader, after restarting my phone i get the welcome message and basically everything is like it was out of the box, is that supposed to happen?
Does unlocking the bootloader reset my phone?
Btw i used the CMD Method
Not rooting
PsychoFish81 said:
U can choose any CyanogenMod marked as suitable for ur phone (xperia mini pro, sk17i), yet
- PAY ATTENTION TO REQUIREMENTS: rooting, unlocking bootloader, which kernel version etc.
- READ SEVERAL TIMES BEFORE EXECUTING! Very important... developer put most important informations in posts, yet specific issuies are reproted and solved as froum thread goes by
Click to expand...
Click to collapse
HELP
I have flashed the kernal to a xperia arc kernal (TO downgrade for rooting)
I start up doomlords rooter thingy
And once i press anykey its on this
daemon not running. Start it now
daemon started successfully
And its just there
Ive used this program to root before and it worked
Btw after installing the neo kernal the phone doesnt restart, only on black scree, ive gotten that before but it had rooted successfully before
Please help me out :/
what are you doing?
if you want cm10, you don't need to root you phone, just simply flashing the rom will give you root
also flashing a kernel not meant for your device will obviosely create problems
instead try flashing this kernel
http://forum.xda-developers.com/showthread.php?t=2076764
and this rom
http://forum.xda-developers.com/showthread.php?t=1780326
Sorry for the inconvinience
Alright then, sorry for my stupidity, i realized the phone had to be connected in MSC
*Facepalm*
Rooting done, going to now flash it back
Wish me luck :fingers-crossed:
Thanks alot
PsychoFish81 said:
Seems to me u probably have a device not "introducing" itself properly Or maybe it's build...
Maybe try the other way around and it right since the beginning.
Get yourself first:
- stock kernel & s/w rreinstalled (via PC Companion)
- since this is sk17i - unlock ur bootloader via official Sony way: http://unlockbootloader.sonymobile.com/ (yet first watch the tutorial form Mihahn: http://forum.xda-developers.com/showthread.php?p=31376248#post31376248 )
- get urself latest FlashTool and install it (http://androxyde.github.com/), use it to root ur phone -> http://forum.xda-developers.com/showthread.php?p=30441163#post30441163
-
- go in very details through here http://forum.xda-developers.com/showthread.php?t=1629334 and
1. download Kernel TFT (appropriate one) and flash it using flash tool (and guess what... here is picture guide by Mihahn: http://forum.xda-developers.com/showthread.php?t=1879982)
2. upload CM9-3 to sd card and try again with CWMRec/Flashtool mode install (depending whether u download .zip or .tft with ROM)
and read read read before u do smthng bad to ur small friend.
Click to expand...
Click to collapse
If I ever meet you in real life, i would give you a hug
I dont know how to thank you!
It worked, i followed the original instructions which are quoted above ^ and it worked
I used a .img file to flash using flashtool and then flashed using CWM6 which came with the kernal
In the startup process
One thing that is a bummer is the slide out keyboards symbols which are printed on my phone do not match the ones which came with CM9
Meaning, on letter 'M' there is the symbol "%" in blue, so when i press the function button on the keyboard i end up with another Symbol when pressing "M", any way to fix it??
And one more thing
I have CM9, is it recommended to install CM10 nightly or should i wait for a stable release?
And if CM10 was good to install what steps should I use to install it?
Should i just place the .zip in the root of sd, then bootup in CWM and then install zip from sdcard?
Or i use the method you gave above?
Or I just boot in CWM and clear data and install from SD?
Hoping for a reply, and thanks alot! :laugh:
Naweed Reza said:
If I ever meet you in real life, i would give you a hug
I dont know how to thank you!
It worked, i followed the original instructions which are quoted above ^ and it worked
I used a .img file to flash using flashtool and then flashed using CWM6 which came with the kernal
In the startup process
One thing that is a bummer is the slide out keyboards symbols which are printed on my phone do not match the ones which came with CM9
Meaning, on letter 'M' there is the symbol "%" in blue, so when i press the function button on the keyboard i end up with another Symbol when pressing "M", any way to fix it??
And one more thing
I have CM9, is it recommended to install CM10 nightly or should i wait for a stable release?
And if CM10 was good to install what steps should I use to install it?
Should i just place the .zip in the root of sd, then bootup in CWM and then install zip from sdcard?
Or i use the method you gave above?
Or I just boot in CWM and clear data and install from SD?
Hoping for a reply, and thanks alot! :laugh:
Click to expand...
Click to collapse
if you want to install a cm10 you need a compatible cm 10 kernel
this one is good http://forum.xda-developers.com/showthread.php?t=2076764
cm 10 is very stable I also have the xperia mini pro and this rom is so awesome
http://forum.xda-developers.com/showthread.php?t=1832308
just follow the instructions for both links you should have cm10 in no time
cs098 said:
if you want to install a cm10 you need a compatible cm 10 kernel
this one is good http://forum.xda-developers.com/showthread.php?t=2076764
cm 10 is very stable I also have the xperia mini pro and this rom is so awesome
http://forum.xda-developers.com/showthread.php?t=1832308
just follow the instructions for both links you should have cm10 in no time
Click to expand...
Click to collapse
The CM10 Nightly i download from CM official website has a boot.img inside the zip
I can use that as the kernal to flash?
Naweed Reza said:
The CM10 Nightly i download from CM official website has a boot.img inside the zip
I can use that as the kernal to flash?
Click to expand...
Click to collapse
yep any cm10 kernel would work, however the fxp one does not have the best battery life or the best performance but it is the most stable
please suggest me the best and the latest custom rom for htc chacha which works with no proplems
I have been tired from searching for it
ModaAli said:
please suggest me the best and the latest custom rom for htc chacha which works with no proplems
I have been tired from searching for it
Click to expand...
Click to collapse
I think just because you're lazy one.
Won't more than 30s searching for the latest version, but not sure if it's the best for you.
This's my daily rom: http://forum.xda-developers.com/showthread.php?t=2767332
And i'm sure you won't live without this: http://forum.xda-developers.com/showthread.php?t=1716124 (I used INT2EXT4, not INT2EXT4+)
If you need Line Break, flash this: http://forum.xda-developers.com/showthread.php?t=2820659
shinjitsunokami said:
I think just because you're lazy one.
Won't more than 30s searching for the latest version, but not sure if it's the best for you.
This's my daily rom: http://forum.xda-developers.com/showthread.php?t=2767332
And i'm sure you won't live without this: http://forum.xda-developers.com/showthread.php?t=1716124 (I used INT2EXT4, not INT2EXT4+)
If you need Line Break, flash this: http://forum.xda-developers.com/showthread.php?t=2820659
Click to expand...
Click to collapse
thanks for help
and thanks for Respect me
yeah, CM11 looks so good. i also use it for daily.
Modded Stock Rom
ModaAli said:
please suggest me the best and the latest custom rom for htc chacha which works with no proplems
I have been tired from searching for it
Click to expand...
Click to collapse
Dear ModaAli,
Have tried many Custom Roms (cm7, cm9.... till cm11 and also SuperOSR), on my HTC Chacha. Most of the Roms work, few are good and few have some bugs. All the mentioned ROMS are better in many aspects comparing to Stock but are not optimal bugfree or features when compare to Stock.
Thus, after reading a lot (doing since last 1 and half a year), finally, tried and build a MOD of stock rom with the help of DSIXDA Kitchan.
Primary aim was Stock (and Sense) features plus internal space. With the above Modded Rom, till date, I,m happy of the output. If you wish can provide you the link to that ROM. You can PM me for that.
My Rom is based on Stock (with Sense) Rom :
RUU : India 1.20.720.1
Android Version: 2.3.3 (Gingerbread)
Kernel: 2.6.35.10
Language Support: English
And is ..
Rooted
Init.d support
Busybox
and presently using it with INT2EXT (by CronMod) mod on a 768MB ext2 type partition. Thus have ample space to run WhatsApp, Viber, WSP Office, Rom Manager, Battery Meter, Twitter, Facebook, FX file manager and few more apps. But still have 300+ Mb internal memory free (which is actually ext-sd swapped with INT2EXT)
rickyjsharma said:
Dear ModaAli,
Have tried many Custom Roms (cm7, cm9.... till cm11 and also SuperOSR), on my HTC Chacha. Most of the Roms work, few are good and few have some bugs. All the mentioned ROMS are better in many aspects comparing to Stock but are not optimal bugfree or features when compare to Stock.
Thus, after reading a lot (doing since last 1 and half a year), finally, tried and build a MOD of stock rom with the help of DSIXDA Kitchan.
Primary aim was Stock (and Sense) features plus internal space. With the above Modded Rom, till date, I,m happy of the output. If you wish can provide you the link to that ROM. You can PM me for that.
My Rom is based on Stock (with Sense) Rom :
RUU : India 1.20.720.1
Android Version: 2.3.3 (Gingerbread)
Kernel: 2.6.35.10
Language Support: English
And is ..
Rooted
Init.d support
Busybox
and presently using it with INT2EXT (by CronMod) mod on a 768MB ext2 type partition. Thus have ample space to run WhatsApp, Viber, WSP Office, Rom Manager, Battery Meter, Twitter, Facebook, FX file manager and few more apps. But still have 300+ Mb internal memory free (which is actually ext-sd swapped with INT2EXT)
Click to expand...
Click to collapse
can you upload your ROM mate, best regards
Will Try to Upload today
swashie said:
can you upload your ROM mate, best regards
Click to expand...
Click to collapse
Dear Swashie,
Will upload today and will provide you the google drive link (hope this kind of links are valid).
Regards,
Ricky
Following is the link . . .
https://drive.google.com/file/d/0B8BfFAtUXk3iaUl0U0FpRUVXUm8/view?usp=sharing
Further, flash the above with CWM after Factory Reset, Clear Dalvik (I prefer formatting Boot, System, Data & ext-sd before flashing any rom for best results). Let it boot once. Then partition and format your ext-sd with your choice of size (mine is 768MB) to ext2 type system. Then reboot and flash the INT2EXT.zip by CronMod. This will enable internal memory to the size of partition you have chosen.
Revert for any help and will try to provide the best what I can.
Regards,
Ricky.
My friend has aChaCha with 2.5.3 version or something similar. Which ROM should i update to which would be stable for a normal user and maintenance free.
Is it easy to install ROMs in HTC. I have flashing experience only with Samsung
Sent from my GT-N7100 using Tapatalk
I can't get cronmod to work with it. any Ideas? I followed your directions below. I was running link2sd on my stock rom, but I formatted and reinstalled several times. I'm lost...
rickyjsharma said:
Dear Swashie,
Will upload today and will provide you the google drive link (hope this kind of links are valid).
Regards,
Ricky
Following is the link . . .
https://drive.google.com/file/d/0B8BfFAtUXk3iaUl0U0FpRUVXUm8/view?usp=sharing
Further, flash the above with CWM after Factory Reset, Clear Dalvik (I prefer formatting Boot, System, Data & ext-sd before flashing any rom for best results). Let it boot once. Then partition and format your ext-sd with your choice of size (mine is 768MB) to ext2 type system. Then reboot and flash the INT2EXT.zip by CronMod. This will enable internal memory to the size of partition you have chosen.
Revert for any help and will try to provide the best what I can.
Regards,
Ricky.
Click to expand...
Click to collapse
Kevinreid1 said:
I can't get cronmod to work with it. any Ideas? I followed your directions below. I was running link2sd on my stock rom, but I formatted and reinstalled several times. I'm lost...
Click to expand...
Click to collapse
Dear Kevin,
Please repeat the following steps : -
01. Boot into Recovery.
02. Format Boot, System, Data & ext-sd.
03. Flash the modified image you downloaded from the link provided by me.
04. Boot the Chacha (should be running & up)
05. Power-off
06. Delete the ext-sd partition and repartition as EXT2
07. Reboot into recovery. Flash the recovery INT2EXT.ZIP (should complete without errors)
08. Reboot
09. Check the working of INT2EXT.ZIP.
It should work. If during the above process, you encounter any error, revert back with the exact error to enable assistance/help.
B/Rgds,
RJS
CM11 For the win
dheon5 said:
CM11 For the win
Click to expand...
Click to collapse
I tried several custom ROMs. One of the best concerning battery and memory usage was SuperOSR 2.5, but it's only Android 2.x.
For Android 4 i prefered CM 10.1 since you don't have much RAM with CM11.
However I changed back to the standard ROM now since I bought the Chacha because of its keyboard, and none of the custom ROMs had a good keyboard support. There even where problems when using the keys for dialing, re-dialing, entering numbers during a call, searching for apps in the list etc. Plus that you can't use your Facebook-Button (for flashlight in my case).
I don't even miss Android 4 - it seems that all apps I need are available for 2.3.5 so far. Latest apps will have problems with this screen anyway.
SD Card Missing or not mounted
rickyjsharma said:
Dear Kevin,
Please repeat the following steps : -
01. Boot into Recovery.
02. Format Boot, System, Data & ext-sd.
03. Flash the modified image you downloaded from the link provided by me.
04. Boot the Chacha (should be running & up)
05. Power-off
06. Delete the ext-sd partition and repartition as EXT2
07. Reboot into recovery. Flash the recovery INT2EXT.ZIP (should complete without errors)
08. Reboot
09. Check the working of INT2EXT.ZIP.
It should work. If during the above process, you encounter any error, revert back with the exact error to enable assistance/help.
B/Rgds,
RJS
Click to expand...
Click to collapse
So is there a way to use this with sd card? I formatted ext2 has primary should I have made it a logical drive instead also have 100mb linux swap I think it's logical.
Also unrelated to the above is there any way to update to play store and play services to use hangouts or is 2.3 android stuck without play services? it downloads but says its not able to install. I said unrelated but maybe it is related to me using the ext2 as primary instead of logical...
BT carkit call problem...
This ROM is great but for me calls with my bluetooth carkit doesn't work.
I can pair devices, sync contacts, make a call but after that I hear only some noise.
Is there any fix or workaround?
thx
really
really its a good device for use roughly.
[ROM][Umi Zero ] Arcatarc's "XperiaZero"
Ciao a tutti amici miei!(hello all my friends!)
i'm proud to introduce you the latest great Arcatarc Creation:
++++++++ XperiaZero +++++++
A full working transplantation of the Sony android Ui with all his features included!!
PREREQUISITES:
Due to the fact that Sony system partition is bigger than stock one of Umi Zero,the first thing we need to do is to expand it...don't worry,if you follow all the steps with care there is not risk ..
Ok,..let's start:
1) First of all you need a full charged battery and an external sd card (the process require time,and internal memory will be formatted during the process)
2) Download&Install my TwrpRecovery
INSTALLATION:
Download to EXTERNAL SD the 3 needed files:
1: "1500mbSystemPartitionExpanderPart1.zip"
2: "1500mbSystemPartitionExpanderPart2.zip"
(many tnx to @eryen for both)
3: "XperiaZero_020715.zip"
4) Using my TWRP RECOVERY MAKE A FULL BACKUP OF YOUR ACTUAL ROM AND INTERNAL MEMORY TO THE SD CARD...OR BETTER MAKE A COPY OF THEM ON YOUR PC TOO..(it will backup all your "vital" partitions that will permit you to restore your Imei,Mac address etc..)
5) Once YOU HAVE DONE THE BACKUP,enter in TwrpRecovery-"Settings" and Un-tick "Use rm -rf instead of formatting" (if ticked)
6) Now,in TwrpRecovery,click "install" and select "1500mbSystemPartitionExpanderPart1.zip"...wait 15/20 minutes until it finished,then reboot in recovery again,click "install" and select "1500mbSystemPartitionExpanderPart2.zip"......when it finish reboot in recovery again....
7) In TwrpRecovery-"Settings" tick "Use rm -rf instead of formatting",then "Wipe"-"Advanced Wipe" select: Dalvik Cache,System,Cache and Data.
8) FINALLY,without exit from Recovery click "Install" and select "XperiaZero.zip"...
fiuuuuu....
..Ok Now You Are On XperiaZero!!!!
VERY IMPORTANT:
Feedback&Contributions are well accepted...
If you like my works an offer is greatly appreciated not only by me (50% will be donate to UNICEF)
DONATIONS
DONATIONS
DONATIONS
Screenshots
Screenshots
Service packs
Service packs
ADDONS:
ADDONS:
KERNELS:
New versions with optimizations (flashable in recovery)
(Kernel)1.7ghzXperiaZero_20-07-15
(Kernel)2.0ghzXperiaZero_20-07-15
CHANGELOG:
CHANGELOG:
BUGS&TIPS:
BUGS&TIPS:
Stock Sony camera and some his extension won't work well,but i've included a full working camera similar to stock one (i hope to fix it in the next days)
Alarms don't works with device turned off(this is not a rom bug,but the normal behavior of the original Sony Xperia devices)
Installation
Good, acatarc 's, I have a question, after installing rom xperia .. which the possibility of returning original will, after all these instaações and division of internal memory ... ??
good work ....
bodyjoao said:
Good, acatarc 's, I have a question, after installing rom xperia .. which the possibility of returning original will, after all these instaações and division of internal memory ... ??
good work ....
Click to expand...
Click to collapse
Don't worry,you can restore every backup you made before and install without problem any rom..but if for some reason you want go back to original partitions layout,simply flash a stock rom with Sptool, it will restore it.
Ciao arcatarc,
at the moment I have the system unmount. Do I have to mount it?
arcatarc said:
Don't worry,you can restore every backup you made before and install without problem any rom..but if for some reason you want go back to original partitions layout,simply flash a stock rom with Sptool, it will restore it.
Click to expand...
Click to collapse
trying to instal ....
lets go ...
Hello! Thanks again for the great work
So, if I expand the system partition and if I want to put another ROM (like MIUI) isn't there any problem? I can have it expanded from now on without any problem?
And could you tell me how much bigger the system partition will be with this? (just for curiosity)
Thanks
MiguelferraZ said:
Hello! Thanks again for the great work
So, if I expand the system partition and if I want to put another ROM (like MIUI) isn't there any problem? I can have it expanded from now on without any problem?
And could you tell me how much bigger the system partition will be with this? (just for curiosity)
Thanks
Click to expand...
Click to collapse
Yes it is,i got this new layout(1500mb instead of 800mb) from two weeks and i've used different rom/backup without problem(using my TwrpRecovery)
I follow all the steps but the result is not good. The device is locked on Zero logo.
Suggestion?
arna1958 said:
Ciao arcatarc,
at the moment I have the system unmount. Do I have to mount it?
Click to expand...
Click to collapse
At witch step you are?..howewer to install the two partition tweaker zip you need to have it unmounted,to install the rom zip you need the system to be mounted...
arna1958 said:
I follow all the steps but the result is not good. The device is locked on Zero logo.
Suggestion?
Click to expand...
Click to collapse
..probably you have skipped some "tick/untick" try again,i personally tested the installation procedure before publish it and i'm sure it works...
:good::good:
arcatarc said:
..probably you have skipped some "tick/untick" try again,i personally tested the installation procedure before publish it and i'm sure it works...
Click to expand...
Click to collapse
Done!!
The problem was the system mount during the new partition.
Let me play with your new rom and later a beer will come to you.
Grazie!!!
arcatarc said:
Yes it is,i got this new layout(1500mb instead of 800mb) from two weeks and i've used different rom/backup without problem(using my TwrpRecovery)
Click to expand...
Click to collapse
Ok thank you, I'll try it
And if you managed to fix the camera (stock sony camera), will we have probably to flash the whole ROM again or just flash a fix?
EDIT: Just noticed that the ROM is very big compared to others, does a bigger ROM file means a worse battery life or performance, or it has nothing do do with it?
Instaled ...and...beautiful...
Problems....
No root !!!!
Sent from my A1-840FHD using XDA Free mobile app
bodyjoao said:
Instaled ...and...beautiful...
Problems....
No root !!!!
Sent from my A1-840FHD using XDA Free mobile app
Click to expand...
Click to collapse
It's rooted: su binary is installed,but if you need to menage apps permission you can install supersu from market..
MiguelferraZ said:
Ok thank you, I'll try it
And if you managed to fix the camera (stock sony camera), will we have probably to flash the whole ROM again or just flash a fix?
EDIT: Just noticed that the ROM is very big compared to others, does a bigger ROM file means a worse battery life or performance, or it has nothing do do with it?
Click to expand...
Click to collapse
Don't worry,it have excellent performance and battery backup....but as usual in the next days i will release a Superleggera version too (for barebone rom lovers as me)
Regarding the camera fix i suppose will be sufficient a simple fix zip
LENOVO A399 MTK6582 4.4.2
ROOT, CUSTOM RECOVERY, CUSTOM ROM (4.4.2 - 5.1)
& RESTORE STOCK ROM INSTRUCTIONS
I'M NOT RESPONSIBLE FOR ANY POSSIBLE DAMAGE DONE TO YOUR DEVICE AS A RESULT OF FLASHING!
OK, so I managed to restore stock firmware and port a rom to this device. I thought I would share my experience as it may help others.
Ensure all drivers are installed before any flashing procedures.
Things needed; === NOT ALL IS NEEDED, TOOLS ARE FOR REFERENCE AND TASK DEPENDENT ===
GOOGLE - FOR INSTRUCTIONS ON HOW TO INSTALL DRIVERS OR USE THE BELOW TOOLS
TOOLS
WINRAR; WinRAR Official
SP Flash Tool [flashing original firmware/custom recovery; MEGA LINK
MTK DroidTool v2.5.3 [general tools, imei reader/fixer, partition block reader + more - NOT NEEDED UNLESS PORTING YOUR OWN ROM]; MEGA LINK
KingRoot; KingRoot Official
SYSTEM IMAGE UNPACK - NOT NEEDED UNLESS PORTING YOUR OWN ROM
[system image/rom porting]
Ext2explore v2.2.71; MEGA LINK
Ext4unpacker; MEGA LINK
ADB TERMINAL
Every android rooter should have this === AndroidMTK.com Official
DRIVERS
I recommend using PdaNet+ to install drivers, download, install follow instruction. It can be found here === PdaNet Official
OR SELF INSTALL DRIVERS
VCOM drivers; MEGA LINK
Micromax x86 and x64 drivers; MEGA LINK
FILES
Stock Firmware (SP Flash included); MEGA LINK
Custom recovery; MEGA LINK
Another custom recovery if above recovery does not find sd card (on resurrection remix for example); MEGA LINK
big thanks to BohArie for the alternate recovery
CUSTOM ROMS
Stock Modded; MEGA LINK
PussyFap v2.5; MEGA LINK
Ressurection Remix OS; MEGA LINK
ALL MEGA LINK HOSTED FILES (handy in one place for downloading if needed)ROOTING
simply install and run kingroot.apk and follow instructions.
CUSTOM RECOVERY
REQUIRED; SP Flash Tool, Original Firmware, Custom recovery [available above]
Unzip the original firmware.
Unzip custom recovery
replace custom recovery with recovery image in the original firmware folder.
Open SP Flash, select scatter file from original firmware folder and press download in application.
Now let's connect device and flash. . . . . . . . . .
Pull battery from phone, connect the usb, sp flash tool will recognise and flash the firmware, wait until complete and remove usb.
Restart phone. . . . .
. . . . . TAKES 10-15MINS. TO REBOOT . . . . .
Now stock firmware & custom recovery installed.
REPLACE STOCK FIRMWARE
!!USE THE ABOVE TO RESTORE STOCK FIRMWARE, JUST DO NOT REPLACE THE RECOVERY IN STOCK AND FLASH AS ABOVE!!
CUSTOM ROMS
STOCK MODDED + ROOTED CUSTOM ROM (MODDED ROM)
Flash in SP Flash Tool, replace recovery first with custom one then flash, This is a stock firmware with tweaks and root.
***** FAP V2.5 + ROOTED CUSTOM ROM (PORTED ROM)
This a rom I ported, works well, no major bugs. Good UI, responsive and 5.1.1 based
needs custom recovery to flash
Put file on external sd card, reboot to custom recovery, install from zip and select file.
wipe cache and dalvik restart phone
known bugs;
1-screen lock sometimes crashes after google services update - disable screen lock
2-none noticed
RESSURECTION REMIX OS - NOT TESTED -
I ported this and should work on this device
MEGA LINK
===FLASH ROM AND THEN GAPPS IN CUSTOM RECOVERY===
(remember to use alternate recovery from above)
ROM PORTING GUIDE
I used this guide here === YOUTUBE LINK
Most of the tools needed are in this post
Always use a rom to port as close to a stock rom as possible [cpu matches cpu . . . ram matches ram . . . etc).
If you want a different rom I can port it for you if you want too test it.
ANY PROBLEMS I AM HAPPY TO HELP.
CREDITS
MTKROMS.COM
NEEDROM.COM
***** FAP TEAM
MTK Hacker Pro VIA YouTube
BohArie via XDA
Tq bro.. ive been looking for this.. i already port many rom for a399 but its for my own use.. i kindda need this Lenovo A399 page in xda.. and i found it.. tq bro..
btw bro.. can u make twrp for lenovo A399
BohArie said:
Tq bro.. ive been looking for this.. i already port many rom for a399 but its for my own use.. i kindda need this Lenovo A399 page in xda.. and i found it.. tq bro..
btw bro.. can u make twrp for lenovo A399
Click to expand...
Click to collapse
I know thats why I made it...seems useless but invaluable if needed.
I have had trouble finding a twrp..there is some for mtk devices on the sites that i credit at the bottom of my op but none have been tested.
If you have any other tools or anything you need for this device let me know and i will update and provide links.
androrooter said:
I know thats why I made it...seems useless but invaluable if needed.
I have had trouble finding a twrp..there is some for mtk devices on the sites that i credit at the bottom of my op but none have been tested.
If you have any other tools or anything you need for this device let me know and i will update and provide links.
Click to expand...
Click to collapse
for twrp i have link and working for our Lenovo A399 but it is Russian not English.. if u know how to port it.. please consider to make it fully English bro..
for twrp for A399 please go to this link..
http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=48230
btw your port wont work if we use ur custom recovery which is Clockwork recovery bro..
Right now, I try to swap storage between sdcard and internal storage also trying to increase ram by Script on init.d..
i need some help if u dont mind bro.. tq..
here.. i manage to swap it but as u see app still install in real internal and not sdcard..
for Ram.. I already swap it about 1.5gb for this devices..
BohArie said:
for twrp i have link and working for our Lenovo A399 but it is Russian not English.. if u know how to port it.. please consider to make it fully English bro..
for twrp for A399 please go to this link..
http://lenovo-forums.ru/applications/core/interface/file/attachment.php?id=48230
btw your port wont work if we use ur custom recovery which is Clockwork recovery bro..
Right now, I try to swap storage between sdcard and internal storage also trying to increase ram by Script on init.d..
i need some help if u dont mind bro.. tq..
here.. i manage to swap it but as u see app still install in real internal and not sdcard..
for Ram.. I already swap it about 1.5gb for this devices..
Click to expand...
Click to collapse
I will have a go at the twrp translation..
Ive not tested ressurection remix but the recovery works with pussyfap...tried and tested and flashed via recovery..you need root at all times.
androrooter said:
I will have a go at the twrp translation..
Ive not tested ressurection remix but the recovery works with pussyfap...tried and tested and flashed via recovery..you need root at all times.
Click to expand...
Click to collapse
Cwm cant flash RR-Remix rom bro coz i already try with diffrent updater-script... But it working on twrp..
BohArie said:
Cwm cant flash RR-Remix rom bro coz i already try with diffrent updater-script... But it working on twrp..
Click to expand...
Click to collapse
Ok thanks. I'll get started on the translation today.
androrooter said:
Ok thanks. I'll get started on the translation today.
Click to expand...
Click to collapse
bro.. i manage to port TWRP 3 for our Lenovo A399..
here link: https://www.mediafire.com/?upfju97knkbx840
the only bug i found in this twrp is:
- reboot option only make device completely turn off (Remove battery to fix this)
BohArie said:
bro.. i manage to port TWRP 3 for our Lenovo A399..
here link: https://www.mediafire.com/?upfju97knkbx840
the only bug i found in this twrp is:
- reboot option only make device completely turn off (Remove battery to fix this)
Click to expand...
Click to collapse
Hey, good work. It seems it's not all that hard.
TWRP WORKING MEGA LINK
try this one, it works on mine with no bugs.
androrooter said:
Hey, good work. It seems it's not all that hard.
TWRP WORKING MEGA LINK
try this one, it works on mine with no bugs.
Click to expand...
Click to collapse
aha... great.. will test it and give you feedback tonight
and feedback is.. ur recovery cant access sdcard.. that what i found it on my device bro
did u make new one or use russian??
we have working twrp.. now we need kindda script to make storage swap.. can u help bro??
BohArie said:
aha... great.. will test it and give you feedback tonight
and feedback is.. ur recovery cant access sdcard.. that what i found it on my device bro
did u make new one or use russian??
we have working twrp.. now we need kindda script to make storage swap.. can u help bro??
Click to expand...
Click to collapse
Ill have a look. Its something to do with the devblk looking in wring place I think.
Didrussian one work with finding sdcard?
androrooter said:
Ill have a look. Its something to do with the devblk looking in wring place I think.
Didrussian one work with finding sdcard?
Click to expand...
Click to collapse
both russian and my port did find sdcard..
the only bug on my port is reboot option make device turn off completely
to fix your recovery.. try to edit some on your recovery.fstab ok ramdisk/res or etc folder bro..
BohArie said:
both russian and my port did find sdcard..
the only bug on my port is reboot option make device turn off completely
to fix your recovery.. try to edit some on your recovery.fstab ok ramdisk/res or etc folder bro..
Click to expand...
Click to collapse
I will sort it
androrooter said:
I will sort it
Click to expand...
Click to collapse
great.. if u dont mind.. please help me to fix twrp the one that i port.. after that.. we working together on swap internal and external on this lenovo A399
BohArie said:
great.. if u dont mind.. please help me to fix twrp the one that i port.. after that.. we working together on swap internal and external on this lenovo A399
Click to expand...
Click to collapse
Hey what rom are you currently using on the a399 with your working twrp (no reboot one)
androrooter said:
Hey what rom are you currently using on the a399 with your working twrp (no reboot one)
Click to expand...
Click to collapse
im using RR-Remix.. my own port..
androrooter said:
Hey what rom are you currently using on the a399 with your working twrp (no reboot one)
Click to expand...
Click to collapse
any news bro???
BohArie said:
any news bro???
Click to expand...
Click to collapse
Hey. I managed to get sdcard working on my twrp but the one you ported is much better as it has more support even with the no reboot problem. It may be best to leave your twrp as it is. It is fully working just with no reboot. Which is relatively minor.
Regarding sdcard not showing on rr ported rom that you using now.
Did you copy....
System/bin/vold
System/bin/sdcard
When you port. Did you copy them from stock to port?...
androrooter said:
Hey. I managed to get sdcard working on my twrp but the one you ported is much better as it has more support even with the no reboot problem. It may be best to leave your twrp as it is. It is fully working just with no reboot. Which is relatively minor.
Regarding sdcard not showing on rr ported rom that you using now.
Did you copy....
System/bin/vold
System/bin/sdcard
When you port. Did you copy them from stock to port?...
Click to expand...
Click to collapse
No bro.. The storage working well.. What i mean is swap storage.. Internal as sdcard on the other hand.. Sdcard as internal.. My port is working very well.. No bug.. The only thing that i want to do is.. Swap the storage.. Btw.. About twrp.. Which one do we use on this thread.. I think ur port much better then mine.. Bcoz i have bug..
BohArie said:
No bro.. The storage working well.. What i mean is swap storage.. Internal as sdcard on the other hand.. Sdcard as internal.. My port is working very well.. No bug.. The only thing that i want to do is.. Swap the storage.. Btw.. About twrp.. Which one do we use on this thread.. I think ur port much better then mine.. Bcoz i have bug..
Click to expand...
Click to collapse
So you want the internal storage to be parsed with external storage like in cyanogenmod roms where it uses external sd as system.. ..
My recovery wont work with ressurection remix i dont think but you can try I will upload later. I think i fixed where it looks for ext sd.
Hello friends , Are you waiting for a bugsfree, fast and most stable rom for our device.... then here it is.....
➡COMBO ROM⬅
It has following features :-
FULLY DEODEXED - NO BLOATWARES to make it light...
TWEAKED KERNEL - various tweaks are added to Kernel to make it SUPERFAST, enhance battery performance, and much more....
NO BUGS - like CM12.1 has touchscreen issues..
NoteRom has signal issues...
BASED ON STOCK ROM - original appears best
PRE BUILT ROOT : you just have to flash a zip file..
PRE BUILT XPOSED : Just install xposed apk. Binary is already present..
Download link for ROM : https://drive.google.com/file/d/0B97_mvaRURo-U29yS2F4RkxXa2s/view?usp=drivesdk
Download link for superSU: https://drive.google.com/file/d/0B97_mvaRURo-bnEwRkE5WHB5RE0/view?usp=drivesdk
Special thanks to @Amit.A
INSTALLATION :-
1. download the .zip file and extract .
2. Reboot to recovery and make a small backup ..
3. Replace the files in the recovery backup folder with the rom files..
4. Reboot to recovery and got to restore and flash ..
ENJOY ..
Screenshot please...
Screenshots..
Info
some more screenshots please! the rom looks awesome
i installed the rom today. looks mostly like the ultralite rom i used before.
hope there are no bugs as mentioned. thanks!
Sorry I posted here first without reading instruction and thank u for the rom
Thanks a ton for this lovely Original ROM
RG
INSTALLATION :-
1. download the .zip file and extract .
2. Reboot to recovery and make a small backup ..
3. Replace the files in the recovery backup folder with the rom files..
4. Reboot to recovery and got to restore and flash ..
ENJOY ..[/QUOTE]
Can we direct restore rom.No need to wipe first??
Hey bro. Can you make it for n7505 variant? Thanks
Lelonio said:
Hey bro. Can you make it for n7505 variant? Thanks
Click to expand...
Click to collapse
Sorry but I don't have n7505 variant...
But its easy, you can make it on your own ... Just follow these steps..
1. Download and flash note5 noble Rom.
2. Backup its boot img.
3. Download original lollipop Rom for your device and flash it through odin..
4. Flash twrp recovery again and then root it and remove/uninstall unwanted system apps...
5. Flash the backup boot img.
ENJOY
i want to install xposed... which type exposed can be install
mayoryusa said:
i want to install xposed... which type exposed can be install
Click to expand...
Click to collapse
Just install the xposed installer apk..
How is this ROM different/better from @Amit.A ROM
[ROM][5.1.1][NOTE5][SM-N750][N7505][Deodexed]?NoteRom
Also, I am currently running this above mentioned ROM but I am hardly getting 1 signal bar strength most of the time which is very frustrating. Have you fixed it in this ROM bro? Thumbs up for your good work, please reply ASAP so I can install your ROM.
Danniel.D said:
How is this ROM different/better from @Amit.A ROM
[ROM][5.1.1][NOTE5][SM-N750][N7505][Deodexed]?NoteRom
Also, I am currently running this above mentioned ROM but I am hardly getting 1 signal bar strength most of the time which is very frustrating. Have you fixed it in this ROM bro? Thumbs up for your good work, please reply ASAP so I can install your ROM.
Click to expand...
Click to collapse
Yupp ! I tried my best !
Hope it will fix your problem
ravichaudhary133 said:
Sorry but I don't have n7505 variant...
But its easy, you can make it on your own ... Just follow these steps..
1. Download and flash note5 noble Rom.
2. Backup its boot img.
3. Download original lollipop Rom for your device and flash it through odin..
4. Flash twrp recovery again and then root it and remove/uninstall unwanted system apps...
5. Flash the backup boot img.
ENJOY
Click to expand...
Click to collapse
Am I stupid or will this end in a stock ROM (although rooted) with only the boot.img different if I don't remove any "system apps" ?
So is this "ROM" single difference with stock is we can remove what we want ? Can we do it also once we've restored the Note/Noble boot.img ? This would be great, along with the fact to stick close to stock gives more chances to be bugs free isn't it ?
Please tell me (I'm newb and non-english easy), what does "combo"ROM stand for ?
Thanks
1stStep said:
Am I stupid or will this end in a stock ROM (although rooted) with only the boot.img different if I don't remove any "system apps" ?
So is this "ROM" single difference with stock is we can remove what we want ? Can we do it also once we've restored the Note/Noble boot.img ? This would be great, along with the fact to stick close to stock gives more chances to be bugs free isn't it ?
Please tell me (I'm newb and non-english easy), what does "combo"ROM stand for ?
Thanks
Click to expand...
Click to collapse
Yes you are right in that this ROM is different from stock in boot.img. But this ROM is different from stock in having no bloatwares and few other patches..
"COMBO" here means this ROM is combination of Noble and Stock ROM
How is it possible that said "patches" would survive to stock reflash. These aren't in boot.img (this is the way you say to install : just install to backup boot.img then erase all with stock and restore boot.img backup). Wouldn't it be simpler to just distribute the tweaked boot.img then only flash this one ?
More, above, about 7505 you say "it's easy" to make it. But where is Noble for 7505 ? It is no more available. In fact this is my main problem to give try to your pragmatic way
Query for rooting Samsung note 3 neo ...
Can you please elaborate step 2 ... I have reboot to recovery. What do you mean by make small backup? Where and How to make it ?