Related
To be completely honest, when I was new to this phone, I had a heck of a hard time finding the USB driver. I know you are supposed to install Kies, but that's a pretty big download. This 19.6 MB installer is found in the Kies files, I just decided to upload this for the sake of people who don't have the drivers yet.
Please inform me if this has already been posted/does not work.
I have NOT tested this, it should work though.
http://www.multiupload.com/IXQSQT03X7
jwl12345 said:
To be completely honest, when I was new to this phone, I had a heck of a hard time finding the USB driver. I know you are supposed to install Kies, but that's a pretty big download. This 19.6 MB installer is found in the Kies files, I just decided to upload this for the sake of people who don't have the drivers yet.
Please inform me if this has already been posted/does not work.
I have NOT tested this, it should work though.
http://www.multiupload.com/IXQSQT03X7
Click to expand...
Click to collapse
[scratches head] kies doesn't support the infuse (other than the drivers of coarse), installing kies is silly. The drivers are on the Samsung website under product support exactly where you'd expect them to be.
Kies supports my infuse...
Yea true don't get support with kies but until I installed it I never could get my phone to find what it needed to on the computer. It really is important if u end up having issues connecting and finding your phone
Sent from my SAMSUNG-SGH-I997 using xda premium
debra said:
Yea true don't get support with kies but until I installed it I never could get my phone to find what it needed to on the computer. It really is important if u end up having issues connecting and finding your phone
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
That's because kies installs drivers, but again the logical place to look for drivers is the Samsung product support section and they are there. Its amazing the simple things this while forum seems to ignore.
---------- Post added at 03:44 AM ---------- Previous post was at 03:40 AM ----------
Naphthoylindole said:
Kies supports my infuse...
Click to expand...
Click to collapse
Which kies functions are supported with the infuse? Can you update firmware? Can you install Samsung apps? Edit contacts? Sync media? I never tried it but as fast as I know only galaxy s phones a supported and the infuse on att is not labeled as a galaxy s. I've heard it doesn't work but I have Linux on my computer and never use windows unless I have to. I have no reason to use kies or USB drivers.
so kies works on infuse now? that would be really helpful if they had an app, because my usb driver is broken and i cant update my phone.
any help?
yes, kies supports the infuse now. and is the only proper way to upgrade to official gingerbread from att.
thats a little stupid idea to say the least...
what about people that dont have a computer, or like me their USB connection on their infuse is not working(im not the only one)?
i cant find any drivers for my infuse or ways to download the update that im pretty sure would fix my phone...they've really left me deserted and want me to pay a fee to have my phones OS reinstalled
on the infuse, gingerbread required a new bootloader which required a computer. you should have drivers loaded with kies, if not you can get them from samsung. you may have to go select the proper driver in device manager. i know it conflicts if you install adb.
The Jack of Clubs said:
on the infuse, gingerbread required a new bootloader which required a computer. you should have drivers loaded with kies, if not you can get them from samsung. you may have to go select the proper driver in device manager. i know it conflicts if you install adb.
Click to expand...
Click to collapse
This method use diff type of drivers....
http://forum.xda-developers.com/showthread.php?t=1524081
Sent from my SAMSUNG-SGH-I997 using Tapatalk 2 Beta-5
devinwithaninfuse said:
thats a little stupid idea to say the least...
what about people that dont have a computer, or like me their USB connection on their infuse is not working(im not the only one)?
i cant find any drivers for my infuse or ways to download the update that im pretty sure would fix my phone...they've really left me deserted and want me to pay a fee to have my phones OS reinstalled
Click to expand...
Click to collapse
Bro your not. My old phone had that. Go yell at them, it is probably broken. Os will not help, tried that. Its sammies fault, they say ooohhh ahhh its software. Bull, unless if yours works on other computers. IF doesnt, then go say you will cancel if they do not treat you correctly.
Oh god necrobump...
Dear all,
i had search all forums but i didnt get any proper information about resetting binary counter in samsung galaxy r
all we have to reset binary counter of s2 only
i only want how to reset binary counter of galaxy r
without making problem to my sgr
thanks in advance
Azhar
there is a sticky post in this android development for how to reset yellow triangle and binary count, u should search before posting a new topic.
u will need a USB JIG to do this, and follow the instruction in post.
azhar.munshi said:
Dear all,
i had search all forums but i didnt get any proper information about resetting binary counter in samsung galaxy r
all we have to reset binary counter of s2 only
i only want how to reset binary counter of galaxy r
without making problem to my sgr
thanks in advance
Azhar
Click to expand...
Click to collapse
I don't think you did it thoroughly
http://forum.xda-developers.com/showthread.php?t=1414053&highlight=usb+jig
but is getting for only s2 not r
What are you talking about? the tutorial I wrote is exclusively for SGR. In S2 is all about plugging USB jig (or sometimes re-flashing bootloader). USB jig works different way on SGR which is explained in guide.
m.kochan10 said:
What are you talking about? the tutorial I wrote is exclusively for SGR. In S2 is all about plugging USB jig (or sometimes re-flashing bootloader). USB jig works different way on SGR which is explained in guide.
Click to expand...
Click to collapse
i am saying that usb jig which are available in market is compatible for only s2
azhar.munshi said:
i am saying that usb jig which are available in market is compatible for only s2
Click to expand...
Click to collapse
USB JIG is same for the SGS II and SGR, resetting method is different for SGR.
Well I don't know what kind of jig is that...but usb jig works with the most of samsung android devices (even if sgr is not mentioned there). I've been using the same jig with my SGS2 and SGR. The way it works differs depended on device but it works in both cases.
azhar.munshi said:
i am saying that usb jig which are available in market is compatible for only s2
Click to expand...
Click to collapse
usb jig is nothing special but it is a resistor of 301 kohm, all usb jigs are same they dnt have any difference.
I have done the reset with a USB jig of s 2 without any issue. It's simple.
Switch off your mobile.plug the jig to your mobile. And restart. It will go to download mode automatically. Then unplug the jig and straight away connect the phone to your PC and flash the stock ROM. Done.
Sent from my GT-I9103 using XDA
ganucci said:
I have done the reset with a USB jig of s 2 without any issue. It's simple.
Switch off your mobile.plug the jig to your mobile. And restart. It will go to download mode automatically. Then unplug the jig and straight away connect the phone to your PC and flash the stock ROM. Done.
Sent from my GT-I9103 using XDA
Click to expand...
Click to collapse
U don't have to flash the whole FW. Stock kernel is enough !
mj.vikram said:
USB JIG is same for the SGS II and SGR, resetting method is different for SGR.
Click to expand...
Click to collapse
The problem is that since latest v2.3.6, the bootloader has locked access to the mmcblk0bootX partition. So that you can no longer reset the counter as you want. However I have another choice for him ....... just follow the guide here : http://forum.xda-developers.com/showthread.php?t=1528256 and makes sure you have done backing up /efs, otherwise you repaired phone is bricked
btw please try to flash 2.3.4 stock rom before if you really want to use the jig mode just to reset counter.
It depends what kind of Odin protocol (DM version) he has. If it's v. 2.0 then USB jig works like a charm (He can even flash XWLA4 - latest 2.3.6 I guess). I had flashed XWLA4, but my DM protocol hasn't changed -It remained as it originally was (2.0). Thus I hadn't any single issues with using USB jig whatsoever.
But I know there are users with Odin Protocol v. 2.1 and there USB jig is useless. And they must use the method you mentioned. Although there must be some easier way to bypass it. In SGS2 all you have to do is just flash the old bootloader and voila. In case of SGR u must go through all these scary steps.
m.kochan10 said:
It depends what kind of Odin protocol (DM version) he has. If it's v. 2.0 then USB jig works like a charm (He can even flash XWLA4 - latest 2.3.6 I guess). I had flashed XWLA4, but my DM protocol hasn't changed -It remained as it originally was (2.0). Thus I hadn't any single issues with using USB jig whatsoever.
But I know there are users with Odin Protocol v. 2.1 and there USB jig is useless. And they must use the method you mentioned. Although there must be some easier way to bypass it. In SGS2 all you have to do is just flash the old bootloader and voila. In case of SGR u must go through all these scary steps.
Click to expand...
Click to collapse
Yep my device is having odin protocol v2.1 as well and I cannot reset the counter as well (well I am prepared to use nvflash instead if anything occurs, and actually I should ask for the donation for getting a new phone just for development as well. Tbh, it is too dangerous to use a daily usage phone just for developement). It was brought in last month only. So you should make a note on the guide saying that if the odin protocol is v2.1, the USB jig reset method doesn't work @ all.
I can confirm that USB jig download mode does not work with odin protocol v2.1.
oh btw my binary counter has gone to 50 times now
UnknownzD said:
So you should make a note on the guide saying that if the odin protocol is v2.1, the USB jig reset method doesn't work @ all.
Click to expand...
Click to collapse
It's been there for a long long time, but I've made it even more clear now
m.kochan10 said:
U don't have to flash the whole FW. Stock kernel is enough !
Click to expand...
Click to collapse
oh yeah I didn't get my stock kernel so I flashed the stock ROM.....hehehe
Sent from my GT-I9103 using XDA
i had tried to install a custom rom and my phone is not starting in either way
it is neither starting in download mode ; the normal on nor in the recovery mode
i have already done this rooting and i am not new to installing custom rom in my device i.e. SAMSUNG GALAXY ACE.
i have also tried to boot it by using usb jig but it failed.
so guys do u have any idea how i can get my phone back or is it bricked for ever.
please share ur views.
Can you link the ROM you flashed?
If you take out the battery then put it back in, then turn it on (or attempt to), does it do anything at all? Vibrate, flash something, anything?
If you plug it in to your computer, does it recognize anything as plugged in, even just a driver?
orangekid said:
Can you link the ROM you flashed?
If you take out the battery then put it back in, then turn it on (or attempt to), does it do anything at all? Vibrate, flash something, anything?
If you plug it in to your computer, does it recognize anything as plugged in, even just a driver?
Click to expand...
Click to collapse
i used this rom to flash
ROM & Kernel] Ace-i-Sure GT-S5830i
by .:: BRIJESH ::.
i tried what u said but its of no use
my phone doesnot respond 2 any of these thing it simply stays in off mode
nvnanda said:
i used this rom to flash
ROM & Kernel] Ace-i-Sure GT-S5830i
by .:: BRIJESH ::.
i tried what u said but its of no use
my phone doesnot respond 2 any of these thing it simply stays in off mode
Click to expand...
Click to collapse
hmm.
Here is the ROM you flashed then
http://forum.xda-developers.com/showthread.php?t=2013936
I notice it says this
Caution: This update should be strictly applied to the devices which are having the model number as ACE S5830i and is not for S5830 model. If you still continue to update in your S5830 model, then we should not be held responsible for any damage happened.
Click to expand...
Click to collapse
Sounds like you didn't have the i version...
To unbrick try the method here
http://forum.xda-developers.com/showthread.php?t=1840645
the 2nd section on unbricking, there's a chance you are missing the drivers necessary to have your computer recognize it and restore it. It's worth a shot.
orangekid said:
hmm.
Here is the ROM you flashed then
http://forum.xda-developers.com/showthread.php?t=2013936
I notice it says this
Sounds like you didn't have the i version...
To unbrick try the method here
http://forum.xda-developers.com/showthread.php?t=1840645
the 2nd section on unbricking, there's a chance you are missing the drivers necessary to have your computer recognize it and restore it. It's worth a shot.
Click to expand...
Click to collapse
i have the i version
but can u tell me more about how to install those drivers in my pc
nvnanda said:
i have the i version
but can u tell me more about how to install those drivers in my pc
Click to expand...
Click to collapse
Follow the guide I linked you to step by step from this section
How to Unbrick Ace 5830i / How to use odin -
orangekid said:
Follow the guide I linked you to step by step from this section
How to Unbrick Ace 5830i / How to use odin -
Click to expand...
Click to collapse
i understand what u mean to say but my phone doesnot start in download mode and usb jig is not working
nvnanda said:
i understand what u mean to say but my phone doesnot start in download mode and usb jig is not working
Click to expand...
Click to collapse
Oh, I didn't actually watch the video, I assumed "unbrick" had something to do with maybe not being able to access Download Mode.
Something crazy, are you sure your battery is in correctly, and are any of the pins that connect to the battery from the phone bent?
orangekid said:
Oh, I didn't actually watch the video, I assumed "unbrick" had something to do with maybe not being able to access Download Mode.
Something crazy, are you sure your battery is in correctly, and are any of the pins that connect to the battery from the phone bent?
Click to expand...
Click to collapse
yes buddy everything is correct my phone doesnot start in any mode known
nvnanda said:
yes buddy everything is correct my phone doesnot start in any mode known
Click to expand...
Click to collapse
Sounds hard bricked to me, let me see if someone with more knowledge on that phone has better insight.
It does sound like its hard bricked.
If usb jig didn't work for you, then only Samsung can fix it for you.
As for warranty, depending on what reason you give them for the "sudden death" of your phone, you might be able to claim it.
Your phone's hard bricked. Get it repaired in the service center!
Sent from my GT-I9070 using xda premium
orangekid said:
Sounds hard bricked to me, let me see if someone with more knowledge on that phone has better insight.
Click to expand...
Click to collapse
thanks man
i would really appreciate if anyone tells me how to get my phone back
thank you for understanding my problem
nvnanda said:
thanks man
i would really appreciate if anyone tells me how to get my phone back
thank you for understanding my problem
Click to expand...
Click to collapse
You should probably call Samsung for a possible warranty claim at this point.
orangekid said:
You should probably call Samsung for a possible warranty claim at this point.
Click to expand...
Click to collapse
i don't have the warranty but can you tell me how much will they ask for repairing my ace??
nvnanda said:
i don't have the warranty but can you tell me how much will they ask for repairing my ace??
Click to expand...
Click to collapse
They might honor the warranty without having to "have" anything, just ask them. I have no idea how much they'll charge.
Motherboard replacement - anywhere around 2500INR
Approx 50USD.
There's one last thing to try.
JTAG. If you don't know how to do it, ask these guys if they can help you with your phone. http://mobiletechvideos.mybigcommerce.com/
They're very good and trustworthy, and their service is great.
It may not start in Download mode, but I'm quite sure a JTAG is still in point. If it doesn't boot into Download mode, it means bl.bin got messed up, which is something unusual since only Samsung code/flashable through ODIN can change that file.
Phistachio said:
There's one last thing to try.
JTAG. If you don't know how to do it, ask these guys if they can help you with your phone. http://mobiletechvideos.mybigcommerce.com/
They're very good and trustworthy, and their service is great.
It may not start in Download mode, but I'm quite sure a JTAG is still in point. If it doesn't boot into Download mode, it means bl.bin got messed up, which is something unusual since only Samsung code/flashable through ODIN can change that file.
Click to expand...
Click to collapse
do i have to send my mobile to them or they will provide free guide to unbrick it?
i reside in india so what i have 2 do?
nvnanda said:
do i have to send my mobile to them or they will provide free guide to unbrick it?
i reside in india so what i have 2 do?
Click to expand...
Click to collapse
You will have to send it to them and it will cost money. It's not something you can get a guide to do - they need to hook up hardware to the phone and that hardware is more expensive than paying them to do it, and not a "do it yourself" kind of thing.
You could search for JTAG repair in your country. Shipping might not be too bad in a small pre-paid USPS PMI box if you have access to that - I sent a small box to Russia for $13 USD
Sent from my SGH-T999 using xda app-developers app
Hi
Today i make the official update to 4.2.2 on my 5100.
After this my Samsung Multimedia Dock wont work. Neither HDMI nor Mass Storage (USB flash drive) is recognized.
Thats really annoying because i need the dock for my work (Presentations with VGA adapter and Mouse)!
Would anyone confirm this problem?
Have anyone a solution?
Thanks for answering!
MoWa007 said:
Hi
Today i make the official update to 4.2.2 on my 5100.
After this my Samsung Multimedia Dock wont work. Neither HDMI nor Mass Storage (USB flash drive) is recognized.
Thats really annoying because i need the dock for my work (Presentations with VGA adapter and Mouse)!
Would anyone confirm this problem?
Have anyone a solution?
Thanks for answering!
Click to expand...
Click to collapse
Why do you have a question posted in the accessories section?
Muffycheeks said:
Why do you have a question posted in the accessories section?
Click to expand...
Click to collapse
Sorry for that!
But i am looking around in this section and there are a lot of questions.
Im thinking too, that it was a important information for users that it could be problems with accessories like the multimedia dock after a update.
Yep, Confirmed.
Multimedia Dock only working as a charging dock now with 4.2.2
Can't even sync with it.
Went back to 4.1.2 because of this and all is working fine again.
GT N5100 After 4 2 2 Update MultimediaDock not recog
You have to install them while the card is NOT connected. After you installed them, connect the card. As you can read in the post I linked to I had to install them several times myself and reboot before I did not get that device not recognized anymore. After that it seemed to work.....
Lauggidadiero said:
You have to install them while the card is NOT connected. After you installed them, connect the card. As you can read in the post I linked to I had to install them several times myself and reboot before I did not get that device not recognized anymore. After that it seemed to work.....
Click to expand...
Click to collapse
It´s not working for me.
Did you meen the Sim-Card not to Connect.
If I right understand you, I have to plug in the Docking (with Power Chord on) without connected to my carrier?
Thanks for answering!
Maybe he means the usb cable. ( cord? )
Back to 4.1.2
And all is working again!
Sincerely, the 4.2 update was a bad choice. Samsung should make a better update. I'm not spitting on it, but no Smart Dock mode?
I'm hopefull that Samsung will launch a bugfix for that.
More than half year passed since that problem appeared with the 4.2.2 update.... Is there any solution to use the multimedia dock on 4.2.2 or only the downgrade can help?
You need a kernel with dock support enabled.
There are some configurations to change while compile new kernel:
CONFIG_MUIC_MAX77693_SUPPORT_OTG_AUDIO_DOCK=y
CONFIG_MUIC_MAX77693_SUPPORT_SMART_DOCK=y
CONFIG_MUIC_MAX77693_SUPPORT_CAR_DOCK=y
I compiled my own kernel and use a cable made to support simultaneos charge and otg.
If you want, send a message and I will sent my kernel.
I wonder how the adapter I've got off eBay^ works then. As long as I do plug in power + USB before the HDMI, I get screen off, charging, and USB host and MHL output. Although the only way I can trickle charger rather than slowly drain is by using the 3A charger from my Chromebook instead of a regular 2A charger.
^: http://www.ebay.com/itm/USB-OTG-MHL...LKgwLjtQBabKyCvZbnoAQ%3D&orig_cvip=true&rt=nc
Has anyone tried the Samsung dock after the KitKat update?
Spidey01 said:
Has anyone tried the Samsung dock after the KitKat update?
Click to expand...
Click to collapse
Doesn't work. You need a special kernel.
sidmoraes said:
Doesn't work. You need a special kernel.
Click to expand...
Click to collapse
Do you have a smart dock enabled kernel for 4.4.2?
I would also be interested in a KitKat Kernel that's working with the dock...
sidmoraes said:
You need a kernel with dock support enabled.
There are some configurations to change while compile new kernel:
CONFIG_MUIC_MAX77693_SUPPORT_OTG_AUDIO_DOCK=y
CONFIG_MUIC_MAX77693_SUPPORT_SMART_DOCK=y
CONFIG_MUIC_MAX77693_SUPPORT_CAR_DOCK=y
I compiled my own kernel and use a cable made to support simultaneos charge and otg.
If you want, send a message and I will sent my kernel.
Click to expand...
Click to collapse
I just updated to 4.4.2 and lost docking ability. Will it be possible to use your kernel for an SGH-I467 from AT&T, the boot loader is locked...I don't know of a method to unlock it. Please advise. Thank you:good:
Any further update to our device?
Hi guys
Here is my problem: I upgraded my Galaxy Tab 2 10.1 P5113 to Kitkat 4.4.4
That was a requirement for installing the Seek Thermal Camera that I am having trouble with (please Google it I am not allowed to post links yet)
The other requirement that someone from support indicated to me was OTH USB which Galaxy Tab 2 10.1 seems to have
I used a micro USB cable to connect the camera to the table.
So right know I have the software installed and the camera connected but ..the software can not see it
My tablet is rooted. Is there any way I can debug this and see if actually the kernel sees this new thermal camera ?
thanks a lot
PF
PF4XDA said:
I used a micro USB cable to connect the camera to the table.
So right know I have the software installed and the camera connected but ..the software can not see it
Click to expand...
Click to collapse
I tried three micro USB extension cables. Two from EBAY did not work. Tablet did not detect camera.
One from Amazon (suggested by support) does work.
Http: SLASH www DOT amazon DOT com SLASH gp SLASH product SLASH B00HAOK7XE SLASH ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
prof_braino said:
I tried three micro USB extension cables. Two from EBAY did not work. Tablet did not detect camera.
One from Amazon (suggested by support) does work.
Http: SLASH www DOT amazon DOT com SLASH gp SLASH product SLASH B00HAOK7XE SLASH ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
My Tablet does not have that type of connector at the tablet end
I don't know what you are talking about
PF4XDA said:
Hi guys
Here is my problem: I upgraded my Galaxy Tab 2 10.1 P5113 to Kitkat 4.4.4
That was a requirement for installing the Seek Thermal Camera that I am having trouble with (please Google it I am not allowed to post links yet)
The other requirement that someone from support indicated to me was OTH USB which Galaxy Tab 2 10.1 seems to have
I used a micro USB cable to connect the camera to the table.
So right know I have the software installed and the camera connected but ..the software can not see it
My tablet is rooted. Is there any way I can debug this and see if actually the kernel sees this new thermal camera ?
thanks a lot
PF
Click to expand...
Click to collapse
How did you root it? And I know the cable your talking about, it isn't the micro SD cable like everyone has, it's the one that looks like an older apple cable. I have the Tab 2 7.0
From my CM11 S3
ShapesBlue said:
How did you root it? And I know the cable your talking about, it isn't the micro SD cable like everyone has, it's the one that looks like an older apple cable. I have the Tab 2 7.0
From my CM11 S3
Click to expand...
Click to collapse
I rooted the tablet following the procedures posted on this site
PF4XDA said:
I rooted the tablet following the procedures posted on this site
Click to expand...
Click to collapse
Ok, there are many ways to root a device. Which specific method did you use
From my CM11 S3
ShapesBlue said:
Ok, there are many ways to root a device. Which specific method did you use
From my CM11 S3
Click to expand...
Click to collapse
I installed CWM or something like that
In the process it rooted the device. I am now able to get the # prompt if I use "su"
This is irrelevant for the topic since the camera is not seen by the device
PF4XDA said:
I installed CWM or something like that
In the process it rooted the device. I am now able to get the # prompt if I use "su"
This is irrelevant for the topic since the camera is not seen by the device
Click to expand...
Click to collapse
I'm attempting to help you, I won't bother with that kind of response. Good luck
From my CM11 S3
ShapesBlue said:
I'm attempting to help you, I won't bother with that kind of response. Good luck
From my CM11 S3
Click to expand...
Click to collapse
Well.....thanks but no thanks
If it takes us 2 days to get to the point of your questions (we are not even close to that) then I would prefer not to be helped this way
You could have said I need you to do this and that... if your tablet was not rooted correctly then this is not going to work.
The camera does not require the tablet to be rooted. debugging that might require that but I don't see your point.
PF4XDA said:
Well.....thanks but no thanks
If it takes us 2 days to get to the point of your questions (we are not even close to that) then I would prefer not to be helped this way
You could have said I need you to do this and that... if your tablet was not rooted correctly then this is not going to work.
The camera does not require the tablet to be rooted. debugging that might require that but I don't see your point.
Click to expand...
Click to collapse
I've never had an issue with the camera on my tablet or my phone... Try another app if that one doesn't work. The attitude is something I don't have to deal with and you can easily find someone else to help you
As far as debugging sometimes things just don't work, there isn't always a reason it just happens
From my CM11 S3
ShapesBlue said:
I've never had an issue with the camera on my tablet or my phone... Try another app if that one doesn't work. The attitude is something I don't have to deal with and you can easily find someone else to help you
As far as debugging sometimes things just don't work, there isn't always a reason it just happens
From my CM11 S3
Click to expand...
Click to collapse
What camera type do you have?
I don't have the tab 2 10.1, I'm running the stock CM camera, like I said if you don't want help I won't help
From my CM11 S3
ShapesBlue said:
I don't have the tab 2 10.1, I'm running the stock CM camera, like I said if you don't want help I won't help
From my CM11 S3
Click to expand...
Click to collapse
Like I said I don't need your help
You should read a little bit about Seek Thermal, what it does and what it needs and then you can think about helping me
Don't offer something that you don't have
Bye!
PF4XDA said:
Like I said I don't need your help
You should read a little bit about Seek Thermal, what it does and what it needs and then you can think about helping me
Don't offer something that you don't have
Bye!
Click to expand...
Click to collapse
For your information I help people all the time, there's no need to be rude
From my CM11 S3
ShapesBlue said:
For your information I help people all the time, there's no need to be rude
From my CM11 S3
Click to expand...
Click to collapse
Then try to be less patronizing when you offer your help and make sure you understand the context
So you are using this with a micro USB adapter?
Looking at the specs it doesn't mention "android tablet compatibility " except for eYepaDs .
Maybe that's why IT doesn't work?
Pp.
PanchoPlanet said:
So you are using this with a micro USB adapter?
Looking at the specs it doesn't mention "android tablet compatibility " except for eYepaDs .
Maybe that's why IT doesn't work?
Pp.
Click to expand...
Click to collapse
Yes I am trying to use it this way
Here is what the developer told me
Ryan (Seek Thermal)
Nov 06 10:22
The basic requirements that can prevent download are 4.3 or newer Android and a rear-facing native camera. The USB OTG functionality, as well as the USB port providing power to OTG attached devices, will not block download, but the camera won't connect. Ideally we would block downloads by USB OTG functionality, but tha tis not an option in Android right now.
Ryan
Seek Support
So you need to revert to a stone age rom in order to use a gadget that is not really supported by an android tablet, and the developer will tell you a bunch of double talk so you don't return the gadget costing him a profit.
"And a rear facing native camera " will prevent download?
What does he mean by "prevent download "?
Does that mean that app won't function?
You need to download samsung stock firmware, and flash with Odin (may need to do factory reset also ) if it doesn't work after first odin flash.
I would test before rooting.
Pp.
PanchoPlanet said:
So you need to revert to a stone age rom in order to use a gadget that is not really supported by an android tablet, and the developer will tell you a bunch of double talk so you don't return the gadget costing him a profit.
"And a rear facing native camera " will prevent download?
What does he mean by "prevent download "?
Does that mean that app won't function?
You need to download samsung stock firmware, and flash with Odin (may need to do factory reset also ) if it doesn't work after first odin flash.
I would test before rooting.
Pp.
Click to expand...
Click to collapse
Nope he was dumb ..actually he wanted to say that if you have something older than 4.3 you can't install the app
The rear facing camera was unclear to me.
I am going to but a cable and test this in an emulator
I suspect that my cable can be the right one but it does not take the OTG power from the tablet to the other end of the cable...
I did not make sure that the cable was OTG, I thought that only the port is that way. Not sure how I can verify this
Don't think cable has to be OTG specific, if the voltage is present to power a device the cable will work. You may need to find out what pin on connector is supposed to be hot for OTG and test.
Pp.