HELP! I was trying to frehsly install a rom..
so i used odin to "master clear" everything
it deleted everything!
hoping that in recovery mode, it'll let me "mount storage" so i can transfer my new rom into the phone, that didnt happen!!!
so, then i tried to go with odin 1 click to install i896 stock...
and it doesnt work , so i unplugged phone, and now i get that mobile phone error..
please help, the only thing i can do successfully do is put my phone in download mode! D:
PLEASE! PLEASE!
THANK YOU!
Open Odin, turn off your phone, hold the volume buttons, and plug it in to get it in download mode. Then use Odin to get stock rom on, then go from there.
Sent from my SAMSUNG-SGH-I897 using XDA App
Read carefully.....
ags on board said:
Open Odin, turn off your phone, hold the volume buttons, and plug it in to get it in download mode. Then use Odin to get stock rom on, then go from there.
Click to expand...
Click to collapse
+1
Go into the ODIN thread and read extensively. Since you can get into download mode, make sure that once you connect your phone you get the COM notification in ODIN. Mine always appears in the small box in the upper left portion of ODIN one-click (if you don't get this, reinstall the samsung drivers found in the ODIN thread and reboot. If you're running Win7, make sure you run ODIN as admin).
Master Clear does exactly what it says...it wipes all of your data. MC is only supposed to be used when your phone is on and fully booted up with USB debugging on.
Flashing back to stock should only take ~5 minutes max - if it halts unplug, pull your battery, wait a few seconds, and restart. If it continues to fail, try a different USB port. If using a PC, use the back USB ports. If it still fails, try a different system. (I had this issue this weekend and finally got it on the first run on my friend's laptop - not sure what happened, had flashed 5-6 times on mine previously).
Hope this helps. Once you're back to stock, be sure to thank designgears for his killer dev work!
EDIT:
PS It's pretty tough to brick a cappy - read extensively in the ODIN thread and you'll see what I mean.
Its always good practice to back everything up and know the step by step procedures before you ever do anything. Good luck!
Connexxions "how to" videos are VERY detailed and shows you step by step how to do just about everything on this phone. I highly recommend them.
don't panic, ur lucky that u can still get into download mode. that is just soft brick I think..
Sent from my SAMSUNG-SGH-I897 using XDA App
so yeah i got my first replacement after the first time this happened... i tried flashing krylon360's rom with odin but got a fail at factory.rfs. keep in mind i am in no way shape or form a noob with odin, i have brought many of my buddies' devices back to life, but for some reason even though i use a USB jig ( which works in my captivate and personally tested and working on the SGS4g before the unrecoverable soft brick) any help please i dont want to have to send it back to t-mobile again... they already charge 10bucks just for shipping.
muleman said:
so yeah i got my first replacement after the first time this happened... i tried flashing krylon360's rom with odin but got a fail at factory.rfs. keep in mind i am in no way shape or form a noob with odin, i have brought many of my buddies' devices back to life, but for some reason even though i use a USB jig ( which works in my captivate and personally tested and working on the SGS4g before the unrecoverable soft brick) any help please i dont want to have to send it back to t-mobile again... they already charge 10bucks just for shipping.
Click to expand...
Click to collapse
Hmm I'd say if the USB jig didn't work, you're not soft bricked. That's a hard brick.
What kind of USB jig are you using?
Was it a ROM or a kernel you flashed? which one, version etc.?
Jig - verified WORKING before the flash attempt
tried to flash [ROM-ODIN]T959VUVKB5 Stock + Root By: krylon360
new sgs4g
new USB cable
opened Odin first, set file
plugged in phone got a good port connection
clicked "Start"
failed at factory.rfs
phone--!--comp screen
unresponsive to JIG
donation rewards for anybody that can help! lol this is depressing, my old captivate isnt this sensitive and has been through hell and back, but this SGS4g.... im dissappointed in.
Uninstall all the drivers for the phone make sure you have the right ones also, and try plugging it into a usb 2.0 slot then run it again, this seemed to work for me. I ran into the same issue I plugged in my jig but it gave me a black screen, but odin recognized it and I flashedthe kd1 update and it was fixed. Hope this helps
muleman said:
Jig - verified WORKING before the flash attempt
tried to flash [ROM-ODIN]T959VUVKB5 Stock + Root By: krylon360
new sgs4g
new USB cable
opened Odin first, set file
plugged in phone got a good port connection
clicked "Start"
failed at factory.rfs
phone--!--comp screen
unresponsive to JIG
Click to expand...
Click to collapse
hold your horses... I got some news for you.
you can flash at that screen
try flashing mine again, or try white's ODIN image.
Along with what krylon said, maybe a bad download, try download file again
Sent from my SGH-T959V using XDA Premium App
will do thanks guys, ill try it tonight and let ya know how it goes for me.
i still dont get how odin gets a connection but the phone itself cannot with the jig... not logical but hey in the process of flashing now
krylon360 said:
hold your horses... I got some news for you.
you can flash at that screen
try flashing mine again, or try white's ODIN image.
Click to expand...
Click to collapse
youre the man.... Thanks much
muleman said:
i still dont get how odin gets a connection but the phone itself cannot with the jig... not logical but hey in the process of flashing now
Click to expand...
Click to collapse
Heimdall works at that same warning screen too. I've done it on my SGS4G.
I am confused..
sgyee said:
Heimdall works at that same warning screen too. I've done it on my SGS4G.
Click to expand...
Click to collapse
If the computer is not recognizing the phone being plugged in, how is ODIN going to be able to process? I don't know if mine SGS4G is irrepairable but when I plug it in to the computer, it will not even show up on device manager. The drivers have been installed in the past and I have used ODIN before.
When I try using ODIN now it won't work since it won't recognize the phone.
I have used JIG and simply will not buzz. It's pretty much as dead as if the phone is not even on.
Any help guys??
amishraa said:
If the computer is not recognizing the phone being plugged in, how is ODIN going to be able to process? I don't know if mine SGS4G is irrepairable but when I plug it in to the computer, it will not even show up on device manager. The drivers have been installed in the past and I have used ODIN before.
When I try using ODIN now it won't work since it won't recognize the phone.
I have used JIG and simply will not buzz. It's pretty much as dead as if the phone is not even on.
Any help guys??
Click to expand...
Click to collapse
If its currently in the state which I'm assuming..
-won't turn on, no sign of life period...
-plugging it in the wall charger won't even show the green battery status...
-won't get recognized when plugged into pc (or odin)...
-all combinations of buttons and battery pulling+usb cable plugging does nothing...
Yea I think its safe to say it went to a land far far away just like my friend's phone and only Samsung can revive it now.. Because I remember reading all the stories how everyone brought theres back to life so easily with the button combos or the jig usage, but those phones all at least showed a sign of life with that cable screen. But if its pitch black like I'm assuming then...
Same here. The jig didn't seem to work - I still got the cell + comp but odin worked anyway and reflashed stock. It's probably better to run Odin off a desktop if you have one.
That screen scared the holy hell out of me a couple of days ago. I ended up having to re-install the samsung drivers for windows 7 and then odin picked the phone right up. The reason I *knew* the phone was recoverable from that screen was simple, though:
I read the screen. It wouldn't be telling you to try something in Kies if you couldn't do anything at that screen. So, I just kept ****ing around trying different things until it worked.
*I* have personally noticed that that screen tends to come up when you accidentally or inadvertently select "Re-Partition" on a rom/image that's not setup for it, or if for any reason your phone gets disconnected or powered off during the flashing process.
That screen scared the holy hell out of me a couple of days ago. I ended up having to re-install the samsung drivers for windows 7 and then odin picked the phone right up. The reason I *knew* the phone was recoverable from that screen was simple, though:
I read the screen. It wouldn't be telling you to try something in Kies if you couldn't do anything at that screen. So, I just kept ****ing around trying different things until it worked.
*I* have personally noticed that that screen tends to come up when you accidentally or inadvertently select "Re-Partition" on a rom/image that's not setup for it, or if for any reason your phone gets disconnected or powered off during the flashing process.
Click to expand...
Click to collapse
I second this. I have been running into this screen while trying to install root from the 2.3.4 leak. I have had black screen, fuzzy screen, random pixel screen. In most cases I have been able recognize the phone using odin. A few of the key steps that I have used to get the phone recognizable in odin are:
1. If the computer says "usb not recognized" when initially plugging in the phone, uplug it and plug it back in. Most of the time when I do this the phone is recognized as samsung device.
1b: If odin now recognizes the phone after running through step 1 I will try to flash the files again. it will usually fail after trying to load the flash files on the first try. I have to mess around with this process a few times and I can usually get a successful flash.
2. I had an case when having to deal with this problem yesterday. I was running through steps 1,1b and not having success. Odin was hanging, (I forget which step). I let it sit for about 10 minutes and was still hanging. I unplugged the phone with odin still hanging pulled battery, powered on, plugged back in. Odin, which was still open and still trying to connect, continued its already started process after plugging it back in!!! This was an accident to still have the odin running and trying to connect, but after reconnecting the phone it successfully flashed!
*I* have personally noticed that that screen tends to come up when you accidentally or inadvertently select "Re-Partition" on a rom/image that's not setup for it, or if for any reason your phone gets disconnected or powered off during the flashing process.
Click to expand...
Click to collapse
These kind of observations are especially helpful! I can concur that I get the same <phone..!..pc> error, when odin tries to flash and gets a write fail, however, I do not have the "re-partition" option set. I then have to run through my previously mentioned steps to try to get a successful flash.
My question is what can i do to keep odin from failing to write when flashing?? I have only been using PDA packages, with the exception of using discrete packages (pit,csc,phone,pda) when loading the 2.3.4 rom leak.
It seems like the flashing write error in odin in causing the <phone..!..pc> error quite often with different flash processes. Does anyone have a solution to what might be causing this write error and what can be done to prevent this whole cycle? If so I sticky or new thread might be useful for other users. It has caused to have to warranty my first phone, urrrg!
Scariest feeling ever........ Not seeing your phone come up on Odin.
Sent from my SGH-T959V using XDA Premium App
Woops ahahahha. Was talkin to my friend. SOrry!
fvnktion said:
I second this. I have been running into this screen while trying to install root from the 2.3.4 leak. I have had black screen, fuzzy screen, random pixel screen. ..... [cut] ......
Click to expand...
Click to collapse
I had the same issue yesterday, when I tried to flash KD1 vanilla (stock) ROM
using ODIN, it failed the first 4 seconds, it boots into fuzzy looking screen and
that's it, every time I tried to boot it the fuzzy screen fades away to pitch black.
there is 2 possibilities that messed up the whole thing for me:
1) Bad ROM.. (i.e, can't be used with ODIN) although some members said it works
but don't know if there anything special to do before hand, if I want to downgrade.
2) Samsung Kies' fault, I installed just right before I used ODIN, and told me my
device is not registered.. hmm.
It could be both cases, but I suspect Kies the culprit, I had to uninstall it, and
uninstall the drivers came with it, installed the drivers found here in these forums,
and Odin recognized a COM port, although black screen on the phone, flashed
to KH1 and I am back to business. phew..
GB is awesome, but I can't stand the weak WIFI issue even with the latest KH1
I have to stand 3 feet away from my router to get a solid signal, with froyo
vanilla rom, I was able to connect like 50 feet away. but that's another problem
not for this thread.
Heh funny thing I read today in some thread, there is a conflict between Kies and
Odin after the incident happened. my fault for not reading a lot, jumping the gun
almost cost me the phone :/
So i just tried odin good 'ol kc1 from ICBINB and odin failed on the first file zimage i think.
After unplugging on boot up i get the image below.
I tried lots of methods to get to the original download mode but keeps going back to this image.
Anyone know what i am talking about? also is this just a different image for download mode? odin recognizes the COM so should i just re-Odin?
you dont need original download mode hook up to computer and use odin with that screen...hell ive even odined with a black screen..
as long as you can hook your phone up and open odin and odin says connected it doesnt matter whats on your screen
you can odin fine with that screen. if your computer doesnt recognize, reboot the computer and plug the usb into another port and you should be good to go
sick
thanks guys
I m gonna give it a try right now. You think the new kg4 modem i flashed earlier has anything to do with this or is it just gay-Odin
no, the modem wouldnt affect it. it may have just been a hiccup in the system. odin has yet to fail me.
first time for me.. don't jinks yourself haha
flashing now seems like it was just a different image for download mode?
there is a progress bar and everything..
Ok I have looked at thread after thread and saw some similar issues but no real solution that has worked for me. Long story short, my brother tried updating his SGS4G and "says" the cable came out during update. Basically phone was stuck in communication with pc screen. After tons of trial and error button combos, jig, etc. I was about to give up as I couldn't get it into download mode. Well got bored so tried again and somehow got Odin to recognize the phone and started to flash the K1. Unfortunately, it failed before completing and now I can get the phone into DL mode but Odin nor the PC will recognize it. It sort of boot loops a couple times then loads up to home screen for a few seconds during media scanning then trips right back to Galaxy S 4g screen and starts the boot loop deal over again. I was able to check before it cut off and it has unknown baseband. Is there any other way to get Odin to recognize while in download? I have done all the steps then plug in phone etc. Odin just sits there and PC said usb not recognized. Tried 3 different PCs with XP, Linux, and Win 7. Is the baseband the issue for getting it recognized now? If I can ever get Odin to recognize I was hoping to manage a full backup to stock and then worry about the baseband issues but for now I am stuck and would have pulled all my hair out by now but I am bald. Any advice or pointing in the right direction would be great.
Edit: Thanks for the help. After tons of attempts I got Heimdall to recognize and got it flashed back to stock.. Still isn't recognizing all the time but hopefully it will enough to allow me to root it before I give it back to him. Thanks again I read and read and tried all sorts of stuff multiple times.
If you can get into download mode. Just start ODIN whether it recognizes phone or not and see what happens. And double check your settings are correct in ODIN. Make sure u have latest version as well. Or try Heimdall.
EDIT: Go ahead and tell us whether you were on FROYO or GB. And why were you flashing K1? And what is K1? KC1?
Are you using FB's GB Ext4 Starter Pack?
Odin can sometimes be a pain. If the computer gives you the "un recognized device" keep trying. Tried different cable and USB port and reinstalling drives and such? Lots of others have had luck using the one click.. Heimdel package. But, I'm an Odin fan... If you get any sign of life from PC while it loops, that's a start.
if you have adb loaded, have you tired to spam the reboot download command while the phone loops?? Its another way to see if it does/can get into download mode..
Did you get it working? If so mark the the title [SOLVED].
I went to flash my sgs2s and it successfully went into download mode. I started Odin and it froze on xxxxx.img. After waiting about 30 minutes, I shut off the phone and tried to go back to my download mode, only to find that it goes to "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." I have tried so many different ways to get it back into download mode and nothing seems to work. I can get to the screen to push the vol+ to get to download mode and it goes back to the error screen.
I have tried to use Kies to restore my device to no avail. I have scoured the web for any information, also to no avail. I have tried a couple of ROMs, one which was a stock ROM, no difference. I cannot boot my phone and am in need of my phone. Thank you for any help you might be able to offer.
Gsii or gsii skyrocket?
Sent from my Liberty using XDA
Samsung Galaxy S2 Skyrocket. Sorry about that.
phantomofdaATL said:
Samsung Galaxy S2 Skyrocket. Sorry about that.
Click to expand...
Click to collapse
Its fine, its still in dl mode. Run it again
if it doesnt work after a few tries, reboot pc, right click and run odin as admin, try a different usb port or cable
phantomofdaATL said:
I went to flash my sgs2s and it successfully went into download mode. I started Odin and it froze on xxxxx.img. After waiting about 30 minutes, I shut off the phone and tried to go back to my download mode, only to find that it goes to "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again." I have tried so many different ways to get it back into download mode and nothing seems to work. I can get to the screen to push the vol+ to get to download mode and it goes back to the error screen.
I have tried to use Kies to restore my device to no avail. I have scoured the web for any information, also to no avail. I have tried a couple of ROMs, one which was a stock ROM, no difference. I cannot boot my phone and am in need of my phone. Thank you for any help you might be able to offer.
Click to expand...
Click to collapse
What were you flashing? Seems like a bad download. Happened to me once. The error screen is download mode. If you try and connect the phone to a computer I am sure ODIN will be able to se it. Redownload whatever you were flashing and try to flash it again using ODIN.
As a usual warning, do NOT check repartition in ODIN.
As a usual tip, use the USb port that's directly on the motherboard of your PC, and not the one on the front.
Also, run ODIN as administrator.
Sent from my SAMSUNG-SGH-I727 using XDA
Changed the usb port and it WORKED! Thanks everyone!
Good to hear.
I had to ask because a lot of... less-than-intelligent... people tend to flash skyrocket roms on gsii phones or vice versa, thus bricking their devices...