i want to install clockworkmod recovery on my galaxy s pluse i9001. but not getting any file anywhere.Even on ROM MANAGER my model is not listed. plz help me out
thanking u in advance
CWM
rahulaps said:
i want to install clockworkmod recovery on my galaxy s pluse i9001. but not getting any file anywhere.Even on ROM MANAGER my model is not listed. plz help me out
thanking u in advance
Click to expand...
Click to collapse
ClockworkMod team does not support the i9001.
There is a port of this program, but I recommend you TWRP.
It's great
Yes use twrp, it has a beautiful and easy touch UI and works with all the ROMs (even the ones that says to use only ClockWorkMod, I used it to flash CyanogenMod)
Related
Hi
new to android... i have flashed my gt 5670 to cmw 7.1 sucessfully....bt g apps is nt working properly..so i tried to install cmw 7.2 on my phone, all goes well bt system is booting for infinite.....hence again i hav to install cmw 7.1.. Kindly help me??? One more thing is it mandatory to flash my device to 2.3.4 before flashing to cmw 7.2....
Download CyanogenMOD 7.2.0 RC5.5 (Full):
http://www.mediafire.com/?54g9lu0pm1eacme
Download Gapps:
http://www.mediafire.com/?qq6ftuztx0jcvtn
First flash the rom (with all the wiping necessities), then in cwm go to mounts and storage, select "mount /system", and then flash gapps.
Before all this, you must have installed the CWM Recovery.
http://forum.xda-developers.com/showthread.php?t=1339640&highlight=clockworkmod
Nope u can flash over any gb rom..tested myself over ddkt1 no problemo
Hi Guys,
My device is Samsung Galaxy Tab 3 8.0 SM-T310.
I have installed CWM from the thread http://forum.xda-developers.com/showthread.php?t=2385539.
Very thanks for CWM creator. :good:
I installed this CWM with Odin version 3.07.
After installing, Odin has shown "Complete" and "Success" message.
and then I reboot my device and go to recovery mode.
But CWM can't show and only stock recovery is shown.
Please help me and point me what is necessary things to install CWM.:crying::crying:
Thanks
SaiThet said:
My device is Samsung Galaxy Tab 3 8.0 SM-T310.
I have installed CWM from the thread http://forum.xda-developers.com/showthread.php?t=2385539.
...
But CWM can't show and only stock recovery is shown.
Click to expand...
Click to collapse
Hi everyone.
I have the same problem!
I always used odin to flash all of my samsung devices; and i tryed the TWRP, the CWM touch and no-touch, but have the same issue. The stock recovery always shown!
Can someone help us please ? Thank a lot
(Sorry for my poor english - French user :cyclops: )
Same here...
I am sorry to say that there is no absoulute confirmed version of CW or CWM for the T310
I for once would wish we'd have this update come, I want ro change my boot animation.
PS Rom Manager by CWM in Playstore, wont work since CWM is not in the T310
Did you tried again?
Same issues for me too on the T310
I also just bought a Galaxy Tab 3 8.0 tonight (T310). Running 4.2.2. CWM r#4 wouldn't load the SD card to allow me to load the root tarball. It also still had the display issues. Then, I loaded TRWP, which worked and allowed for root access, but pretty much nothing else.
I thought I might try CWM one more time before I leave for 10 days, but it looks like I am stuck with TWRP right now. Too bad too, since I wanted to install the unofficial CM version (but I think CM requires CWM), or at least just a stock rom. This Samsung loaded garbage they call a ROM is messy and slow, it annoys me.
Thanks to the all the developers who put so much into these projects.
hi everybody
first of all thank you guys for your amazing works
I've just got some questions
i've Ace Plus GT-S7500 only
and i read about the CWM 6.0.3.5 here in forum and i installed it using terminal emulator and it works
but now i'm trying to install speedmod 4.4.2 and i did the full wipe before installing .. but it didn't work
I asked some people one of them said that i have to install CWM 6.0.4.5 to install speedmod .. i searched through this forum and i found how to do it .. i did it exactly as they said it was just installing form CWM recovery bit it didn't work also
in the background there is a "dead android man" with a triangle and (!) inside ..
thanks god i could restore the 2.3.6 stock rom ...
can anubody help me please ??
and thanks
AhmeD-Shifflin said:
hi everybody
first of all thank you guys for your amazing works
I've just got some questions
i've Ace Plus GT-S7500 only
and i read about the CWM 6.0.3.5 here in forum and i installed it using terminal emulator and it works
but now i'm trying to install speedmod 4.4.2 and i did the full wipe before installing .. but it didn't work
I asked some people one of them said that i have to install CWM 6.0.4.5 to install speedmod .. i searched through this forum and i found how to do it .. i did it exactly as they said it was just installing form CWM recovery bit it didn't work also
in the background there is a "dead android man" with a triangle and (!) inside ..
thanks god i could restore the 2.3.6 stock rom ...
can anubody help me please ??
and thanks
Click to expand...
Click to collapse
i use cwm 6.0.2.3 and just follow the installation guide in op and all will work except the bug in the list. just read the whole thread of speedmod and you will get an answer:good:
ANDROID-000 said:
i use cwm 6.0.2.3 and just follow the installation guide in op and all will work except the bug in the list. just read the whole thread of speedmod and you will get an answer:good:
Click to expand...
Click to collapse
i did wipe cache,dalvik and factory reset .. and format system .. but it didn't work
also when i tried to flash the CWM 6.0.4.5 it didn't work too
is there another way than using odin ?
AhmeD-Shifflin said:
i did wipe cache,dalvik and factory reset .. and format system .. but it didn't work
also when i tried to flash the CWM 6.0.4.5 it didn't work too
is there another way than using odin ?
Click to expand...
Click to collapse
u mea to say flashin different version of CWM also fails???
u tried flashing twrp?
personal experience i am on 6.0.4 everything is ok..
in Odin flash the cwm ...
i have flashed it with cwm 5.5 and no bugs other than listed in the thread of speedmod..!!
yeah i tried to flash another version of CWM but it didn't work ... Does it make sense i couldn't flash roms or CWM versions because i flash the CWM 6.0.3.5 using terminal emulator ? :\
and I didn't try to flash twrp but if i want to .. how could i overwrite cwm and replace with twrp ?
and if i tried to flash speedmod using odin it's gonna work right ?
but i prefer to stay away from odin because it's dangerous a little for me as a beginner
now i'm trying to install jelly plus rom http://forum.xda-developers.com/showthread.php?t=2649307
it was the same result it didn't work too
there is a guy said that some mobiles can not install roms directly from CWM .. he said that i should install it using odin .. is that true ?
please i need help guys
just flash correct recovery through odin,any cwm version will work,listed in forums for our device,then just wipe data,cache,dalvik and flash the rom,i have done it about 10-20 times now,nothing has ever gone wrong..!!!
just follow the correct steps..!!
Sooo I Have the samsung galaxy s3 S968C Model (straight talk model) and i Dont know how to put cynogenmod on it can some one please help me?!?!?
RxHollow said:
Sooo I Have the samsung galaxy s3 S968C Model (straight talk model) and i Dont know how to put cynogenmod on it can some one please help me?!?!?
Click to expand...
Click to collapse
From what I've read the D2VZW ROMs work on it but remember to always make a backup and look at some Verizon ROMs as well
So to put CyanogenMod on it we need a custom recovery.
Now first some knowledge on the phone, apparently it's the Verizon variant rebadged.
To install CWM (Recovery) we have to root the phone, to do this use the Cydia Impactor method by Saurik: http://www.cydiaimpactor.com/
Once rooted use EZ-Recovery (https://play.google.com/store/apps/details?id=com.mmmeff.ez&hl=en) to install CWM. You MUST use the VERIZON recovery and NOT the Sprint as it WILL brick your device.
After that you should have ClockworkMod Recovey on your device, to check just boot into recovery by holding down the Volume up, home button and power for a few seconds. Once loaded make a Nandroid backup and when in the normal phone ROM copy it to PC incase of issues
Now that CWM is installed just copy your chosen ROM and Gapps file to your SD and boot into recovery, choose the wipe data/factory reset option and wipe cache. Then choose to install your ROM and Gapps.
Hopefully this should work and you now have CM installed
Hope I could help and good luck with your phone.
what now
So i installed cwm and now its telling me that theres an error mounting the sd card im confused xD
want to install new rom problem with recovery version. I have galaxy ace 5830. i want to install cmm11 in it but cmm11 require CWM 6.0.5.3. but in my phone it is showing as cwm 5.0.2.6. if any one can help with it??
vinod113 said:
want to install new rom problem with recovery version. I have galaxy ace 5830. i want to install cmm11 in it but cmm11 require CWM 6.0.5.3. but in my phone it is showing as cwm 5.0.2.6. if any one can help with it??
Click to expand...
Click to collapse
Here is the flashable zip for cwm 6.0.5.3 make sure your phone is "5830" and NOT "5830i" before flashing.