Database Info

Is there hope?

Sorry if this has been asked, but I checked a lit of the q&a but is there any hope or any developers working on ICS for us? And because I don't know much why is it hard to port to the sgs 4g?
Sent from my SGH-T959V using XDA App

An entire kernel needs to be built from practically scratch... Its a tonnnn of work. And our GB source JUST came out...
Sent from my SGH-T959V

OK sorry, like I said I don't know much and just was curious. Thank you for the info tho
Sent from my SGH-T959V using XDA App

tehgyb said:
An entire kernel needs to be built from practically scratch... Its a tonnnn of work. And our GB source JUST came out...
Sent from my SGH-T959V
Click to expand...
Click to collapse
Really? I know some (almost all except the very newest ones) of the Motorola phones have completely locked boot loaders which prohibit any unauthorized kernel from being loaded. Take for example, the Milestone and the Milestone xt720- they were forced (figuratively speaking) to build roms for Froyo and Gingerbread off of the same, crappy kernel that was released with Eclair. They have done a lot, it's far from stable. Which surprises me considering how bad the phone was, how few people got it, and the general negative attitude that tends to flow through Xda.
I don't know much about it- for example, once the kernel is built for gingerbread, does a new one need to be built, or can that kernel be repurposed?

How about building a Gingerbread Kernel ( CM7 based )
Now that they have finally released a Gingerbread source for the 4GS, It would be nice to have a CM7 build. I know the Devs are busy with ICS, or other products, but if one would be willing to work with me, I'd be willing to make a jab at it. I can currrently build the released kernel, but something is missing that I can not get the zimage to successfully load. It is also smaller in size. The only referenced web discussion I could find was for the I9003 series and there are files mentioned that are not part of the 4G. Any help would be appreciated.

mccabet said:
Now that they have finally released a Gingerbread source for the 4GS, It would be nice to have a CM7 build. I know the Devs are busy with ICS, or other products, but if one would be willing to work with me, I'd be willing to make a jab at it. I can currrently build the released kernel, but something is missing that I can not get the zimage to successfully load. It is also smaller in size. The only referenced web discussion I could find was for the I9003 series and there are files mentioned that are not part of the 4G. Any help would be appreciated.
Click to expand...
Click to collapse
Oh trust me, devs are looking at cm7. I know I am, like its a big New York steak!
But its going to be a while, unless you can employee me to work on it. Otherwise... Gotta pay the bills before I have fun.
Sent from my SGH-T959V using xda premium

I know that and realize other priorities make everyones time valuable. I am trying to get up to speed and just need a little bit of help getting the base kernel to build. I have successfully built the CM7 in the past for the captivate, but this is the first time for an raw, untouch source release from samsung.
Thanks for your input.

Also, just to note. There are multiple kernel devs here.
Still waiting for drhonk to release some Bali goodness.
My kernel has a different goal and approach from drhonk's. Search the op of my kernel thread for 'plan'.
As usual, all code is GPL and is available on github (see my signature), so if you want to learn or help out, start with the source.
Sent from my SGH-T959V using xda premium

finch8423 said:
Really? I know some (almost all except the very newest ones) of the Motorola phones have completely locked boot loaders which prohibit any unauthorized kernel from being loaded. Take for example, the Milestone and the Milestone xt720- they were forced (figuratively speaking) to build roms for Froyo and Gingerbread off of the same, crappy kernel that was released with Eclair. They have done a lot, it's far from stable. Which surprises me considering how bad the phone was, how few people got it, and the general negative attitude that tends to flow through Xda.
I don't know much about it- for example, once the kernel is built for gingerbread, does a new one need to be built, or can that kernel be repurposed?
Click to expand...
Click to collapse
you seem to be forgetting that every device except for the SGS1 series takes a boot.img this makes it a lot easier to do things because of the partition layout. sgs1 series uses zImage with initramfs, and has a BML/RFS file system. Not ext4, mtd, yaffs2, ext3...but a **** file system.

krylon360 said:
you seem to be forgetting that every device except for the SGS1 series takes a boot.img this makes it a lot easier to do things because of the partition layout. sgs1 series uses zImage with initramfs, and has a BML/RFS file system. Not ext4, mtd, yaffs2, ext3...but a **** file system.
Click to expand...
Click to collapse
Yea, don't sweat this quite yet, Krylon360
I say we work on the cwm that converts to ext4 like epic4g, like you'd suggested in irc. I already have some code and tests in place to convert to mtd. It's just not in any kind of stable/usable/releasable form yet. It's still early code.
When (hopefully soon) I get time, and hopefully an email back from chipworks about some info I need, I'm going to get u-boot rolling. It's hard for me to explain all the benefits of this now, but some snippets:
fastboot mode (say, flash an mtd partition like: fastboot flash <partition name> <file>)
android usb gadget support (adbd) in u-boot (say to have early console access at the bootloader), and plenty of other goodies.
many other things I just don't have time to list, on top of the fact that we can now control the bootloader...

doing the auto conversion is cake. it's just a bit inside init.rc that tells it to run a script in /sbin, that script is just a quick conversion to ext4. as long as /system, /data, and /cache have the ext4 mounting bit in init.rc, and the ext4.ko is in /lib/modules, it should would just fine.
I'll get the script while Im at work tomorrow.

Krylon360,
you mentioned the initramfs being combined with the zimage. Can you shed some light on how this is done?
bhundven,
Thank you for your help. I will be checking out your source to look over and looking at your forum. Thanks Again!

I know everyone has prob said this. But I'm willing to test betas and such for the sgs4g. Let me know if I can. Thanks
Sent from my SGH-T959V using XDA App

[ROM]CM10-Pure v1 (31/7/2012}

Thanks to the encouragement of blindndumb, I've decided to personally make a cm10 rom too. This CM10 Rom also acts as my base for my PA.
So... Yea. As Usual,
Double Thanks for cnote74 for making the kernel too for me as my computer is the most old fashion one :-/
And also 0.0 for teaching me how to port
And also blindndumb for the camera patch
And also ...Awesome... for the amazing AwesomeBeatsv3
And also hdorius for supporting me all the way till now
And also ParanoidAndroid For even making this rom possible
(YES I LOVE THE 2 WORDS AND ALSO )
Flashing Instructions ( Very Important -> You must be on cm10 )
1. Make Sure You're On The Latest CWM Or 4EXT Recovery
2. Make A Backup
3. Wipe Cache and Dalvik
4. Flash ROM ×Still requesting permission before uploading×
5. Flash Gapps ×http://goo.im/gapps/gapps-jb-20120726-signed.zip×
6. Reboot and Enjoy
When will it be released?
It will be released as soon as i get the permissions from other dev and at the same time thanking blindndumb,hdorius and cnote74 for helping me through this difficult times and making it a big success

Why create this thread if you haven't got the rom to release yet?
Sent from my Desire HD using Tapatalk 2

any new info for this rom camera work ! or camcorder work full on this rom ?
kee going great from you

mrbubba999 said:
Why create this thread if you haven't got the rom to release yet?
Sent from my Desire HD using Tapatalk 2
Click to expand...
Click to collapse
I am able to release it right now just need to get the permissions and the links would be up instant. Camera works but camcorder doesn't work for me.

Camera for non samsung sensor, for dhd with omniVision sensor?

Gradjevinac said:
Camera for non samsung sensor, for dhd with omniVision sensor?
Click to expand...
Click to collapse
Huh? o.o

simahu said:
Huh? o.o
Click to expand...
Click to collapse
Multiple sensor vendors for the Camera exist. Just because it is an HTC phone does not mean you have an HTC camera(omnivision or Samsung) You need to know this stuff man:silly:

I can understand if people want to make there own roms. And i really appreciate it if they share the work with the community. But before you do this, you should learn something about how to do this stuff!
Sent from my Desire HD using xda app-developers app

Sorry but I wont be going anywhere near anything you release and I use that term loosely. You appear to be jumping from one genuine developer's rom's to another trying to cobble up your own rom. Just reading your previous posts clearly shows your technical abilities are rather lacking.

Should maybe also add, non or unofficial CM10 rom as well to the title.
IDK
WR

Stop me if i am wrong... But if you compiled CM10 from source then why do you have to wait for permission???? What CM10 rom are you using as a base then??? Jellytime is the only one i know of to boot and run with CM10, and we all know you will not get permission from Random

Guys,
I have already requested a mod take a look at this. I find it weird that his computer cannot compile a kernel but it can compile a rom. Even on my custom built with a 6 core AMD Phenom with 16 GB of RAM it takes about an hour to an hour and a half to compile from source. That would require at least 2 days time on his machine with a melted core. We will see if this is legit. Let the mods take care of this

menditsa said:
Sorry but I wont be going anywhere near anything you release and I use that term loosely. You appear to be jumping from one genuine developer's rom's to another trying to cobble up your own rom. Just reading your previous posts clearly shows your technical abilities are rather lacking.
Click to expand...
Click to collapse
Let me take a peek at this. He thanked people for compliling the kernel and then thanked multiple other people... so he took a bunch of other peoples work and crunched them into one... something seems alittle fishy is all I say. And yes its pretty clean on my part that he doesn't seem to know what he's doing. (Don't get me wrong I'm no where near being a dev but it just seems like he's trying to make himself popular for making one) idk.That's my input so ill just see where this goes. Goodluck
Sent from my Inspire 4G using xda premium

Thread Closed.
Placeholder threads for "coming soon" ROMs are not allowed. Neither are ROMs that use other peoples work without permission.
Note to OP, I you wish to use randomblame's kernel, compile it yourself, its not that hard and there is nothing in the GPL that prevents you from doing so.

Imoseyon BETA leanKernel TW (8/8 - v0.1, kexec)

I did not create "this" and I'm not taking credit for it. This is an awesome kernel created by an awesome dev. I have seen a lot of people asking about where to find this kernel so I asked the dev if I could make this thread to help everyone out over here. I do plan to keep this updated as he updates his OP over on Rootz.
LINK TO ORIGINAL POST ON ROOTZWIKI
This is a kexec Touchwiz test kernel. Use his thread to report bugs, etc.
WARNING: If you're on full stock, you must install busybox first.
DOWNLOAD
latest beta kernel: flashable zip
to return to stock kernel: flashable zip
INSTRUCTIONS
Make sure you're on a recovery that supports auto-flash (any CWM compatible recovery should work - I use v6.0.1.0).
Make sure your ROM has busybox installed properly (otherwise it will bootloop).
Download and flash the zip file in recovery (yup that's it).
Reboot (it will appear to boot twice after that and at every boot).
FEATURES
Unnecessary components removed for lean and fast kernel.
Compiled using latest Linaro compiler with additional optimizations.
Latest Linux updates applied (currently up to 3.0.39).
Ramdisk optimizations.
Kexec (credit goes to Mike Kasick, Austin Dicken, etc.)
OC'ed to 1.9Ghz (limited to 1.51Ghz at boot, use an app to change max freq)
SIO I/O scheduler default
Fast Charge (toggle via the "ffc" script - open terminal, type ffc then enter, plug in phone via USB)
On-demand governor backported from Linux 3.5
CHANGELOG (BETA)
v0.1 (b31fd85c46133f21d3e83d2a5c7d6f94) - initial beta release. Changes from test v12.2.
CHANGELOG (TEST KERNEL)
v10.4 - initial test release
v11.1 (0a169bbc58f7f5b14315f6e2dad47226) - leaner kernel, ondemand governor backported from Linux 3.5, latest interactive governor (not recommended yet)
v12 (8d31143328f19a6183ce6ed50d3f2f76) - fixed default max frequency (really set to 1.51ghz), custom boot animation support, init.d support, Linux 3.0.39 update
v12.2 (3640421cf043e4bdb88de3162c9984fa) - fixed blue LED issue at boot for some ROMs.
TODO
This is alpha/test kernel. More development will come.
Remember this is just a repost of his OP. To get support from the dev you will more than likely have to go over to Rootzwiki to get it. All of the links in this post redirect to the OP on Rootzwiki and not to download links. You will have to go to his OP to download the kernel.
Disclaimer said:
Me and this dev are not responible for you not reading the entire post on either site and bricking your device or anything else you might want to blame either of us for.
Click to expand...
Click to collapse

How do I use USB Fast Charge?
1) Unplug from USB cable.
2) Open Terminal Emulator, type "ffc" (without quotes) and enter. This command will toggle your fast charge state.
3) Plug it back in.
Note: running the same command again will disable fast charge.
Also, when fast charge is enabled USB communication will be disabled.
Why KEXEC?
I actually had my own hybrid recovery/kernel method, which was kinda cool. No special kernel modification was necessary, simpler boot hijack, etc. But it did mean that recovery was modified and required flashing into recovery partition for every new version. Plus all the cool cats were using kexec.

I don't mean to be a jerk or step out of place, but ,there really isn't any development here since everything is centered at Rootz. I can certainly understand a DISCUSSION thread in General, but all the actual development is over at Rootzwiki. Why not create a discussion thread in General and allow Imo to make his own thread in development if he so chooses to do so?
That's my 2 cents. Mods feel free to nuke my thoughts here if you'd like.

bobloblaw1 said:
I don't mean to be a jerk or step out of place, but ,there really isn't any development here since everything is centered at Rootz. I can certainly understand a DISCUSSION thread in General, but all the actual development is over at Rootzwiki. Why not create a discussion thread in General and allow Imo to make his own thread in development if he so chooses to do so?
That's my 2 cents. Mods feel free to nuke my thoughts here if you'd like.
Click to expand...
Click to collapse
I didn't want it to get lost in General and I asked him if he wanted me to make one or if he could make one over here for us and he told me to go ahead. I see where you are coming from though.
EDIT: If mods feel this should be elsewhere feel free to move it. I just figured this would be the best place to put it.

Yah i think it will be useful since half of the Rom threads are all about this kernal anyways there taking up way to many pages. There does need to be a seperate thread for it so good ups.

If you did not development nor can support it then it does not belong in Development
Thread moved
Also please show where the original developers authorized you to copy their material and links
Thanks
FNM

kennyglass123 said:
If you did not development nor can support it then it does not belong in Development
Thread moved
Also please show where the original developers authorized you to copy their material and links
Thanks
FNM
Click to expand...
Click to collapse
Sent you a PM with screenshots of imo and I's conversation.

Does anyone know how to get the phone to charge while it's off on this kernel? My phone will just vibrate but won't charge while off.

d1ez3 said:
Does anyone know how to get the phone to charge while it's off on this kernel? My phone will just vibrate but won't charge while off.
Click to expand...
Click to collapse
I have never tried to charge with the phone off. Beta just released about 20 minutes ago. Try that and see if it fixes it.
EDIT: Might have found the answer over on Rootz.
http://rootzwiki.com/topic/31329-imoseyon-beta-leankernel-tw-88-v01-kexec/page__st__260#entry870710

thanks, trying the beta now

No problem. I have the beta on my phone and it seems really solid so far.

this has already been covered in my guide...i think having multiple guide threadz for each and every rom/kernel is silly and confusing. which is why i made a all in one guide that covers all develpment and tweaks...what not. part of the reason i link to the original dev threads so users can keep up on the lastest there but ask questions in my thread.

droidstyle said:
this has already been covered in my guide...i think having multiple guide threadz for each and every rom/kernel is silly and confusing. which is why i made a all in one guide that covers all develpment and tweaks...what not. part of the reason i link to the original dev threads so users can keep up on the lastest there but ask questions in my thread.
Click to expand...
Click to collapse
I didn't realize there was a link to Imos kernel anywhere except inside of ROM threads so I figured I would duplicate his post here so people here would see. There is a whole lot of people who posted in the Synergy thread that they didn't know where his kernel was or where to find it and things like that. I figured the easiest way would be to have a post on XDA devoted to his kernel. If we had a mega thread of all the root methods, tools, ROMs, kernels, and themes then that would probably be better than this to help people find anything they may need for their phone with very little effort.

I'm assuming this wont work on the cm10 nightlies?

Will kexec kernels still work with an unlocked bootloader
Sent from my SCH-I535 using xda app-developers app

vx2ko said:
Will kexec kernels still work with an unlocked bootloader
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
yes. in their current form your device will still boot like 3 times though. There will be no change. In the next few days devs will be unpacking their zips and removing the kexec process. Now they just need to copy over any modules and dd the kernel to mmcblk0p7. But yes, these kernels will still work fine right now.
When the devs repackage them, however, you will no longer have to bootloop 3 times before booting with your custom kernel. it will load on first boot everytime, until you dd the stock kernel back to mmcblk0p7

When I flash nothing happens?
I just put on the Psycho ROM on my i9300 today and wanted to test this kernel out to see what 1.9Ghz feels like. I downloaded both the experimental and stable build.
I flashed the experimental build first, but my Siyah kernel still showed up. So I tried it again, but to no avail. Same incident with the stable build.
I notice when it flashes it seems like less than a second... I downloaded the experimental build v1.7 a few days ago, and its stable build today.
Any ideas?

Heatshiver said:
I just put on the Psycho ROM on my i9300 today and wanted to test this kernel out to see what 1.9Ghz feels like. I downloaded both the experimental and stable build.
I flashed the experimental build first, but my Siyah kernel still showed up. So I tried it again, but to no avail. Same incident with the stable build.
I notice when it flashes it seems like less than a second... I downloaded the experimental build v1.7 a few days ago, and its stable build today.
Any ideas?
Click to expand...
Click to collapse
Ask in the proper section this is for Verizon GS3.
Sent from my Galaxy SIII

Still getting WiFi drops on HD based Roms? Thats the only stopping me from using LK

TokedUp said:
Still getting WiFi drops on HD based Roms? Thats the only stopping me from using LK
Click to expand...
Click to collapse
Nope. Imo says not to use the latest (October 27) release on anything newer than G1.
Sent from my SCH-I535 using xda app-developers app

[Guide][FAQ][UPDATED] Don't know about something? check this out first

To make Pico general section free of multiple reptitive questions i decided to make a FAQ thread
1). Can i root my phone?
Yes you can if you unlocked your bootloader
refer to this tutorial for reference
2a). What can i benefit from rooting my device?
For basic users, Root gives us a privilege to use apps that require root like titanium backup, rootexplorer and the likes. Root can also give you the ability to use CWM recovery and install custom roms
2b). Is there a downside to rooting?
yes, for one you may loose your warranty for unlocking your bootloader. you may also have a very slim chance (like 1%) in bricking your phone if you dont know what you are doing
3). What is ROM?
It's like Windows in android.without a rom your phone is good as brick.
4.). What is CWM and Custom ROM?
A custom rom is a modified form of the rom that was given to us by htc. a few examples of this are CM roms, AOKP roms,PA roms,PAC-roms, Sense-Based CWM is short for clockworkmod recovery it's a tool use to install custom roms, patches.
5). What is this CM/AOKP/PA/PAC/SENSE your talking about?
CM is short for CyanogenMod, CM gives its user vanilla android experience (which is only present in nexus devices) at the same time more options and customization available there are 4 versions so far CM6(not available for explorer)(froyo 2.2.x),CM7(Gingerbread 2.3.x),CM9(Ice Cream Sandwich 4.0.x)and CM10(Jellybean 4.1- 4.2)
AOKP is short for Android Open Kang Project, AOKP brings user MORE goodies than CM gives and it also gives the user Vanilla android experience.
PA is Short for Paranoid Android, Also like CM but it gives you unique Tablet UI (phone will look like a tablet) for your device even though it's just a phone.
PAC is combined PA, AOKP, CM. It gives the combined features of the 3
Lastly, Sense based rom are roms that are based from stock rom (with htc ui) or some are ported from other device
6). How to install one of this rom
Look for the rom that you think you like in android development section and follow the instruction given by the developer
7). So which of them is the best?
Try them all and don't compare roms people have their own preferences. when you compare roms some devs may feel bad and leave this device for good.

part 2:
1). My Device has very little amount of memory space available,how to increase memory?
there are various scripts in the forum to increase internal memory i'll give you some
this one or this one
2). Is overclocking the device possible?
for CM7/9 there is a kernel that support overclocking but i dont think its possible yet for CM10
3). Is Offline Charging for custom roms possible? (charging on plug while phone is off)
for now i haven't seen a rom or kernel that supports it (not sure about stock rom)
4). What is S-off
S-OFF means that the NAND portion of the device is unlocked and can be written to. In other words more options will be available once s-off is attained
5). So is S-Off Possible for HTC explorer?
As of now not yet but some people are trying to work on it
6). so what is a kernel anyway?
it's the medium through which the hardware part of the phone "talks" to the software side of the phone basically,like a translator of some sort. without the kernel a rom would never run
7). where can i get those kernels?
it's built in inside the rom you downloaded but you can try other kernels which other devs made by flashing them through the recovery
8). are all kernels compatible to my rom??
the answer is no, because some kernel were made for ics and not for gb, same goes for Jb kernel to Gb or Jb kernel to ICS so basically they are not interchangeable but there maybe kernels that can be compatible to both ICS/Jb because both versions were a little similar
9). so what's the best kernel??
again, the answer is dont compare them, but it's better not to touch the kernel because the developer of the rom has made the kernel in harmony with the rom. changing kernel may cause the rom to give unusual errors or problems

PS: If i made a mistake in the thread please feel free to tell me
I'll update the the thread whenever there's a new questions
Suggestions are accepted

Typing Mistake
Post #2 Point 5. It has been mistyped Possoble

In post2 point1 both the scripts are int2ext+ cm 10
Sent from my HTC Explorer A310e using xda premium

it was just an example i posted those 2 since they were the first one i saw when i was typing

Ohh....i see now
Thanks for this thread btw
Sent from my HTC Explorer A310e using xda premium

There was never a true overclock for Explorer.

xpmode said:
There was never a true overclock for Explorer.
Click to expand...
Click to collapse
well if i'm not mistaken cranium kernel did have overclock

nice thread +1
suggestion : you can add a bit info about kernels

vimjam said:
nice thread +1
suggestion : you can add a bit info about kernels
Click to expand...
Click to collapse
Seconded..

vimjam said:
nice thread +1
suggestion : you can add a bit info about kernels
Click to expand...
Click to collapse
will do that

UPDATE
new information has been added

anything goes bad after overclocking kernel?
---------- Post added at 08:21 PM ---------- Previous post was at 08:09 PM ----------
what is the maximum safe value for overclocking kernel?:

overclocking can fry your phone so its not recommeneded to be used
Sent from my Nexus 7 using XDA Premium HD app

Root
Is it Working???
vimjam said:
nice thread +1
suggestion : you can add a bit info about kernels
Click to expand...
Click to collapse

play store missing..!!
ngoralph said:
PS: If i made a mistake in the thread please feel free to tell me
I'll update the the thread whenever there's a new questions
Suggestions are accepted
Click to expand...
Click to collapse
Please suggest a way to install play store again... i installed and tried some custom roms... and made a backup of the stock rom using cwm recovery... but when i restored the stock rom...the playstore is missing.. please help..

Next can somebody PLEASE write out a thread outlining the benefits of an appropriate topic, or maybe a "A dummy's guide to composing a topic" maybe or "Do's and Dont's of topic composing".
Searching the forum can only prove to be beneficial IF the freaking threads have a TOPIC which gives an idea of the content!
Oh btw, this had nothing to do with either the OP or any post here just a general observation and the main reason of my cussing constantly while browsing these forums.
EDIT: I wanted to post it here: http://forum.xda-developers.com/showthread.php?t=1970184 but sadly that topic is closed and this seemed like the next best place.

shubhambhutani1 said:
Please suggest a way to install play store again... i installed and tried some custom roms... and made a backup of the stock rom using cwm recovery... but when i restored the stock rom...the playstore is missing.. please help..
Click to expand...
Click to collapse
put phonesky.apk to system/app via root explorer
phonesky.apk can be downloaded in Themes/apps section check my index for easy find

Fas1h said:
Next can somebody PLEASE write out a thread outlining the benefits of an appropriate topic, or maybe a "A dummy's guide to composing a topic" maybe or "Do's and Dont's of topic composing".
Searching the forum can only prove to be beneficial IF the freaking threads have a TOPIC which gives an idea of the content!
Oh btw, this had nothing to do with either the OP or any post here just a general observation and the main reason of my cussing constantly while browsing these forums.
EDIT: I wanted to post it here: http://forum.xda-developers.com/showthread.php?t=1970184 but sadly that topic is closed and this seemed like the next best place.
Click to expand...
Click to collapse
will start doing this thanks for the suggestion

Nvidia Shield Tablet Kernel

Moved the kernel to its own thread
https://forum.xda-developers.com/shield-tablet/development/oc-k1-nougat-t3996325

I suggest android file host...

Can't wait for the kernel to come out!

Hazel nut said:
Can't wait for the kernel to come out!
Click to expand...
Click to collapse
its pretty much done, im just trying to squeeze more speed out of it.. also the tap to wake seems to only work when it wants.. i loose access to rear camera, but my sons works fine, not that i use it for taking pictures lol, ill upload a v1 for people linked to my dropbox as i dont know how to upload here yet..:good:

v1.0
v1.0
https://www.dropbox.com/s/k0d1wjrxxki8p8f/Bleeblun OC K1.zip?dl=1[/QUOTE]

Bleeblun said:
v1.0
https://www.dropbox.com/s/k0d1wjrxxki8p8f/Bleeblun OC K1.zip?dl=1
Click to expand...
Click to collapse
I think you need to check XDA rules before uploading kernels. I think XDA require that kernel sources must be available.
Anyway I'm sure you can check out the forum guidelines for submitting kernels.
Happy compiling.
Sent from my Nvidia Shield Tablet using XDA Labs

jemail said:
I think you need to check XDA rules before uploading kernels. I think XDA require that kernel sources must be available.
Anyway I'm sure you can check out the forum guidelines for submitting kernels.
Happy compiling.
That’s why I asked, but no one seems interested in responding or helping in any way.. I know people have uploaded guides, but they aren’t easy to follow or even close to how to do it.. I asked how to do it - 600 people read it and not one person responded ?*
Click to expand...
Click to collapse

Well you can't expect all 600 people to be devs ?
Read the xda forum rules and you will find that you need to have some number of posts (10 I think??) before you can make a rom/kernel/development thread (afaik, might be wrong). For uploading, afh is prefered, and uploading source code is probably a must.
Thanks for your effort never the less!
Edit: typo

Nah, I didn’t expect 600 devs, but someone to point me in the right direction maybe.. for being self taught and copying/modifying bits of wolfies code into bitobs codes - how can I point them to the source? would I need to upload my modified source to github?
Also as for making 10 posts - do I just post random junk to get my count up? ?* It just seems a bit crap to me, I should just make a post explaining how to do it..

I don't know honestly, I would guess you need to upload the modified code (so probably the thing you compile into the flashable image) to github yes, with all the polite thanks and props to bitO and werewolf.
As for the post count, again, I told you I'm not sure about it (or anything I said really, because I myself am not a dev), so spend an hour or two reading xda rules, there has to be something that answers your problems or we would have steel01 and every other dev asking the same things...

V2-oc-k1 shield tablet
V2 - faster and smoother
Shield tablet OC-K1
More file system supports
Slightly undervolted to help temperatures
Probably a lot more but can't remember..
https://www.dropbox.com/s/7bd72jvzijmosh4/Bleeblun OC K1 v2.zip?dl=1

V2 - faster and smoother
Done a post for it somewhere but here's a link
https://www.dropbox.com/s/7bd72jvzijmosh4/Bleeblun OC K1 v2.zip?dl=1

Is this kernel for stock or Lineage? On Lineage v2 doesn't boot.

It’s for stock nougat

Could you cook something for lineage 15.1?

it’s should be easy enough to do, just I’d have nothing to test it on, as I’m not swapping to lineage

Leave that up to me, no problem. If you could I would thank you.

Hi, thanks for the kernel (just found it). Did you enable multirom as I'm currently using Stock and Lineage ?

jpearn said:
Hi, thanks for the kernel (just found it). Did you enable multirom as I'm currently using Stock and Lineage ?
Click to expand...
Click to collapse
is multirom all i need to enable? ill search for it in the menuconfig as youre not the only one asking for lineage.. whats the benefit of lineage anyway? as i dont see the point of loosing nvidia experience games. A free gaming pc, why would i loose that..

Disrupthor said:
Could you cook something for lineage 15.1?
Click to expand...
Click to collapse
theres another guy asking for lineage, whats the benefit, also he has pointed me in a direction to enable it for lineage, so ill give it a search. however you guys will have to let me know if it works as i dont want to loose nvidia experience