Am i the only one that is not getting the ota pushed to them...yes i am bone stock at this point
Sent from my SCH-I510 using Xparent Blue Tapatalk
I've never seen it. Though I've been on the FP1 radios since the day of the update.
PaulN64007 said:
I've never seen it. Though I've been on the FP1 radios since the day of the update.
Click to expand...
Click to collapse
Yeah I have odin'd back to stock ep4d a few times and nothing. Left it on overnight once to and notta
Sent from my SCH-I510 using Xparent Blue Tapatalk
motcher41 said:
Yeah I have odin'd back to stock ep4d a few times and nothing. Left it on overnight once to and notta
Sent from my SCH-I510 using Xparent Blue Tapatalk
Click to expand...
Click to collapse
You could try EE4 take the EP4D ota then maybe the FP1H will pop up.
motcher41 said:
Am i the only one that is not getting the ota pushed to them...yes i am bone stock at this point
Sent from my SCH-I510 using Xparent Blue Tapatalk
Click to expand...
Click to collapse
Still waiting as well.
Sent from my SCH-I510 using XDA
PaulN64007 said:
You could try EE4 take the EP4D ota then maybe the FP1H will pop up.
Click to expand...
Click to collapse
Thought about that..downloading over 3g takes forever.
Reilly1812 said:
Still waiting as well.
Glad im not the only one. Id rather use the ota then the flashing one. Im a pain like that
Sent from my SCH-I510 using XDA
Click to expand...
Click to collapse
Sent from my SCH-I510 using Xparent Blue Tapatalk
motcher41 said:
Thought about that..downloading over 3g takes forever.
Sent from my SCH-I510 using Xparent Blue Tapatalk
Click to expand...
Click to collapse
just connect to wifi
Can't you manually download the file?
Sent from my handheld Linux computer using electromagnetic radiation.
JihadSquad said:
Can't you manually download the file?
Sent from my handheld Linux computer using electromagnetic radiation.
Click to expand...
Click to collapse
Of course i can.but that isn't the point. Just rode updates up...man not much has changed since froyo. No wifi or home internet. Only 3g
Sent from my SCH-I510 using Xparent Blue Tapatalk
My signal isn't cutting out anymore. That's a huge improvement. Can't see why fp1 won't start
Sent from my SCH-I510 using Xparent Blue Tapatalk
PaulN64007 said:
just connect to wifi
Click to expand...
Click to collapse
You can't download OTA updates via Wifi AFAIK.
imnuts said:
You can't download OTA updates via Wifi AFAIK.
Click to expand...
Click to collapse
Good to know. I've never tried it on wifi. Just giving him an idea to try.
Fonally I got it pushed. When on eclipse lol
Sent from my motchified charge running eclipsecrack
I just got it to and I to am on eclipse. I didn't even know there was an update, I haven't been on the forums for a while.
Sent from my SCH-I510 using xda premium
Will the new update get rid of root
Sent from my GT-P6210 using xda premium
No.
wolverine38812 said:
Will the new update get rid of root
Sent from my GT-P6210 using xda premium
Click to expand...
Click to collapse
DO NOT accept the update with a rooted phone, if you must install the update "officially" you need to Odin back to stock unrooted, check the forums if you need help with that it is stickied.
Your other option is to get a CWM flashable version of the rom or just the radio here: http://forum.xda-developers.com/showthread.php?t=1560117
If you want to keep your phone rooted and just disable the annoying ota popup notification you can do this: http://www.chargeforums.com/forum/d...s-ota-update-very-easy-but-requires-root.html
Thanks !!
Thanks cliMAKtic !!!
This is the answer what I was looking for. By the way, should I use cwm to ugrade to FP1 radio? Can I use odin? I have EP4 Deodexed / Rooted on my phone, which was loaded by Odin.
Odin flashes .tar Odin packages
cwr flashes .zip files via recovery
You just use the right tool for the job.
HominaHominaHomina
whiz98 said:
Thanks cliMAKtic !!!
This is the answer what I was looking for. By the way, should I use cwm to ugrade to FP1 radio? Can I use odin? I have EP4 Deodexed / Rooted on my phone, which was loaded by Odin.
Click to expand...
Click to collapse
2scampy said:
Odin flashes .tar Odin packages
cwr flashes .zip files via recovery
You just use the right tool for the job.
Click to expand...
Click to collapse
This is true but it can be a little confusing since occasionally odin packages (md5.tar) are downloaded in zip files and need to be pulled out, but yes files flashed through CWM are in .zip format.
This is just the FP1 radio update (.zip format) I pulled it from the link above. Download the file, put it on your sd card, go into CWM, wipe cache and dalvik, go to mounts/storage, mount /system, go to install zip from sd card, install it, and thats it. Note that it takes a while to install so don't pull your battery thinking it froze, just let it finish.
http://bit.ly/GE6IVa
imnuts said:
You can't download OTA updates via Wifi AFAIK.
Click to expand...
Click to collapse
Yep - the lightbulb lit last night, left wifi off, and awoke to the update notification. OTA <> wifi. Thanks.
Sent from my SCH-I510 using XDA
Related
Official Gingerbread for the Droid Charge
Known issues:
None after 30 days of use.
Release notes: This is unofficial and a leak. Teamblackhat is not responsible for what you do to your phone. Installing this firmware will void your warranty and may cause harm to your device.
You can download it from the this thread http://www.mydroidworld.com/forums/...3-4-ep1w-leaked-official-build.html#post99504
It includes Stock-Rooted, DeBloated-Rooted, and Radio only.
Enjoy the the build.
First.
Sent from my SCH-I510 using xda premium
is this the gb release that verizion will go with?
clk5068 said:
is this the gb release that verizion will go with?
Click to expand...
Click to collapse
his site says official build.....
Yay thanks!
Cool... TY JIMMY!
I am interested if anyone has installed this?
ijustdontcare said:
I am interested if anyone has installed this?
Click to expand...
Click to collapse
Yep its awesome
Sent from my SCH-I510
I'll be giving it a test run as soon as Titanium finishes backing up all my apps.
ijustdontcare said:
I am interested if anyone has installed this?
Click to expand...
Click to collapse
been on it since yesterday and loving it.....
NotATreoFan said:
I'll be giving it a test run as soon as Titanium finishes backing up all my apps.
Click to expand...
Click to collapse
the sound quality w/this is so much better...music,video ect...http://www.mydroidworld.com/forums/images/smilies/smoke.gif
it is a awesome build now we just need the dev's to get it looking pretty and get ext4 on it
Sent from my SCH-I510 using xda premium
How do you flash these leaks, im going to use odin for it but just a little direction would be highly appreciated. I've been flashing and rooting samsungs but have never tried a leak. Also, am I able to flash gummy charge back over this if needed and the radio still remain?
Sent from my SCH-I510 using XDA App
Gonna kang the radio out of this and run GC2.0 FE until it gets remixed.
Also the whole flash modem deal I don't understand either
Sent from my SCH-I510 using XDA App
ceredics said:
How do you flash these leaks, im going to use odin for it but just a little direction would be highly appreciated. I've been flashing and rooting samsungs but have never tried a leak. Also, am I able to flash gummy charge back over this if needed and the radio still remain?
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
Go to first new post
http://forum.xda-developers.com/showthread.php?t=1249493
Thanks a lot. I understand how to flash the leak basically like a rom via odin. But im still not understanding modems? The link posted here for the ep1w is rom and radio combo?
Sent from my SCH-I510 using XDA App
Maybe I do understand, flash the leak and boot it then flash the modem correct? I don't care for ext4 or all that I just want the latest gingerbread and radio. Modem =radio? When I flash the modem thru odin do I put it in the pit or pda?
Sent from my SCH-I510 using XDA App
ceredics said:
Thanks a lot. I understand how to flash the leak basically like a rom via odin. But im still not understanding modems? The link posted here for the ep1w is rom and radio combo?
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
modems are the radios ...follow the link in the op
ceredics said:
Maybe I do understand, flash the leak and boot it then flash the modem correct? I don't care for ext4 or all that I just want the latest gingerbread and radio. Modem =radio? When I flash the modem thru odin do I put it in the pit or pda?
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
when you odin the leak it will have the new modem/radio already... and put it in PDA...
Oh okay so basically they stripped the modem out for people who just want the new radios. Got it. Okay I get it now lol just had to get those questions out, not a noob just never did a leak lol
Sent from my SCH-I510 using XDA App
So I woke up to the download already completed, the only option I had was to reboot. Now I have a triangle with a blue exclimation and a green android......I was running Gummy 2.1. Any ideas? Pull the battery and try to boot into recovery???
oleo1975 said:
So I woke up to the download already completed, the only option I had was to reboot. Now I have a triangle with a blue exclimation and a green android......I was running Gummy 2.1. Any ideas? Pull the battery and try to boot into recovery???
Click to expand...
Click to collapse
WOW! I am surprised the OTA even went thru while running custom rom. Have you tried odin yet? Can you even get into download mode?
Sent from my SCH-I510 using XDA App
I was able to get into CWM Voodoo Lagfix recovery v4.0.0.0.8.
Trying to decide what to do from here.
GrainOsand said:
WOW! I am surprised the OTA even went thru while running custom rom. Have you tried odin yet? Can you even get into download mode?
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
I hear ya GoS. Not only am I surprised it went through, this is the first time I have ever heard of an OTA being pushed to someone's phone without them getting a prompt and clicking on the prompt to accept the OTA.
honestly it might have been accepted...my 6 year old brought it to me. So he might have hit a button??
oleo1975 said:
honestly it might have been accepted...my 6 year old brought it to me. So he might have hit a button??
Click to expand...
Click to collapse
Ok thanks. Just trying to figure out what is happening so I can properly warn people.
Well I tried to re-install the pit file and now it's totally dead
oleo1975 said:
Well I tried to re-install the pit file and now it's totally dead
Click to expand...
Click to collapse
were you using the pit file in combination with the full stock EE4 file? You have to use both together at the same time in ODIN
I'm using Samsung_Charge_ED2_Full.tar.md5 and the charge.pit file ?
Md5 file is in PDA spot. is that correct?
oleo1975 said:
I'm using Samsung_Charge_ED2_Full.tar.md5 and the charge.pit file ?
Md5 file is in PDA spot. is that correct?
Click to expand...
Click to collapse
Download the file below (full, stock EE4). Unzip it and use that file in the PDA section with the PIT file in the PIT section. Also make sure the re-partition box is checked.
http://bit.ly/r3jeQB
oleo1975 said:
I'm using Samsung_Charge_ED2_Full.tar.md5 and the charge.pit file ?
Md5 file is in PDA spot. is that correct?
Click to expand...
Click to collapse
ED2 is very old. At least get EE4, so that you can get the OTA again.
MD5 file in PDA, that's correct.
CI510_VZW_EE4_ALL_ONE-LTE-CP_REV03_user_CL1014954.tar.md5.7z
MD5: B1FF17D01A9EAF2A85E928B7B340804F
Extracted File MD5: 7ECF9ED3FD74461C8895D0D30BCF6C41
landshark68 said:
Download the file below (full, stock EE4). Unzip it and use that file in the PDA section with the PIT file in the PIT section. Also make sure the re-partition box is checked.
http://bit.ly/r3jeQB
Click to expand...
Click to collapse
Complete!!! Rebooted and i'm up and running 2.2.1........So I called VZ and going to see if they can push 2.3 to me. STUPID BLOAT WARE.
Thanks for your help!!! I was freeking out that I lost my phone
Good to hear!
Sent from my SCH-I510 using XDA App
We have the update ZIP in one of the posts here. Download that, it would be the same one you'd be getting from Verizon.
Sent from my SCH-I510 using Tapatalk
trparky said:
We have the update ZIP in one of the posts here. Download that, it would be the same one you'd be getting from Verizon.
Sent from my SCH-I510 using Tapatalk
Click to expand...
Click to collapse
I just applied the zip. Works great.
Sent from my SCH-I510 using XDA App
I just spoke to a verizon rep who said that verizon hasn't released the update but it can be obtained by going to the Samsung website and downloading it from there. I think it can be flashed through odin, but he mentioned something about "kies". Good luck ya'll.
Hope this helps
Sent from my SCH-I510 using XDA App
andrewjt19 said:
I just spoke to a verizon rep who said that verizon hasn't released the update but it can be obtained by going to the Samsung website and downloading it from there. I think it can be flashed through odin, but he mentioned something about "kies". Good luck ya'll.
Hope this helps
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
nope kies is for international/GSM/other phones we can only receive it OTA
sent from my Acer Iconia A500 beast of a tablet via XDA app
andrewjt19 said:
I just spoke to a verizon rep who said that verizon hasn't released the update but it can be obtained by going to the Samsung website and downloading it from there. I think it can be flashed through odin, but he mentioned something about "kies". Good luck ya'll.
Hope this helps
Sent from my SCH-I510 using XDA App
Click to expand...
Click to collapse
What was put out at the Samsung website is just the source code anyway, not any type of flashable ROM or update.
Please use the Q&A Forum for questions Thanks
Moving to Q&A
That's the message I get after flashing stock. I'm flashing the ep4 that's rooted with kernal and recovery. I've downloaded ep4 complete stock (the 548mb download) atleast 20 times (without unlimited internet lol) and I get a bad hash value with that. When I flash the ep4 rooted rom, it boots into Android system recovery and gives me "1fs done open fail"...I've searched and haven't exactly found a solution. Can anyone help?
Sorry for the scrambled explanation, I just woke up after a long night of trying to fix this
Sent from my Incredible 2 using xda premium
brd912 said:
That's the message I get after flashing stock. I'm flashing the ep4 that's rooted with kernal and recovery. I've downloaded ep4 complete stock (the 548mb download) atleast 20 times (without unlimited internet lol) and I get a bad hash value with that. When I flash the ep4 rooted rom, it boots into Android system recovery and gives me "1fs done open fail"...I've searched and haven't exactly found a solution. Can anyone help?
Sorry for the scrambled explanation, I just woke up after a long night of trying to fix this
Sent from my Incredible 2 using xda premium
Click to expand...
Click to collapse
Try to follow this direction and use EE4 image if EP4 doesn't work. If you have to use EE4 then let it upgrade to Ep4 through OTA, then Odin what ever EP4D combo you like.
http://www.imnuts.org/odin-packages/
OK did that. But it says my phone is up to date, so how would I get ep4?
Sent from my Incredible 2 using xda premium
brd912 said:
OK did that. But it says my phone is up to date, so how would I get ep4?
Sent from my Incredible 2 using xda premium
Click to expand...
Click to collapse
Just Odin ep4 image from the link.
OK got it. Thanks now I'll try the new eclipse rom.
Sent from my Incredible 2 using xda premium
brd912 said:
OK got it. Thanks now I'll try the new eclipse rom.
Sent from my Incredible 2 using xda premium
Click to expand...
Click to collapse
Make sure you upgrade to FP1 first before you flash Eclipse 2.0
http://forum.xda-developers.com/showthread.php?t=1560117
I just got an update notification for build UCLI3. Is it safe to upgrade to on a phone with Clockworkmod Recovery installed? Some people are saying it boots into recovery, but then says "update failed" once rebooted.
TL;DR: Has anyone seamlessly updated to UCLI3 on a phone with CWM installed?
almost any update to a phone that doesn't have the stock recovery wont update due the fact that the update thats being sent out is processed differently with stock vs cwm and twrp
an no its not good to update with non stock recovery
hmmwhatsthisdo said:
I just got an update notification for build UCLI3. Is it safe to upgrade to on a phone with Clockworkmod Recovery installed? Some people are saying it boots into recovery, but then says "update failed" once rebooted.
TL;DR: Has anyone seamlessly updated to UCLI3 on a phone with CWM installed?
Click to expand...
Click to collapse
Read the other 4 threads created about this and you'll find out the answer is no, it will not work.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Anyone extracted the radio from this yet?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Jnewell05 said:
Anyone extracted the radio from this yet?
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Yes, cdsheperd did
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
Read the other 4 threads created about this and you'll find out the answer is no, it will not work.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
I did. I didn't know whether or not the "update failed" message kept the phone from booting normally. I don't exactly have an hour or so to check.
hmmwhatsthisdo said:
I did. I didn't know whether or not the "update failed" message kept the phone from booting normally. I don't exactly have an hour or so to check.
Click to expand...
Click to collapse
You're welcome
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
So, would returning to just the stock recovery, then doing the OTA and re-installing CWM work, or do I need to do a factory reset as well beforehand?
hmmwhatsthisdo said:
So, would returning to just the stock recovery, then doing the OTA and re-installing CWM work, or do I need to do a factory reset as well beforehand?
Click to expand...
Click to collapse
Should work with no reset
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
hmmwhatsthisdo said:
I just got an update notification for build UCLI3. Is it safe to upgrade to on a phone with Clockworkmod Recovery installed? Some people are saying it boots into recovery, but then says "update failed" once rebooted.
TL;DR: Has anyone seamlessly updated to UCLI3 on a phone with CWM installed?
Click to expand...
Click to collapse
I got the update notification as well. It downloaded and rebooted to CWM recovery without installing. Rebooted to system with no problems.I did an ODIN revert to stock and checked for updates, it downloaded and installed properly. Then reinstalled CWM via ODIN.Then rooted with flashable SU zip. all seems fine so far.
xcrazydx said:
Yes, cdsheperd did
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Link?
copene said:
Link?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?p=33344009
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
http://forum.xda-developers.com/showthread.php?p=33344009
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Thanks man, just flashed.
copene said:
Thanks man, just flashed.
Click to expand...
Click to collapse
Yup! How's it working for you? It slowed down my data to about 2/3 of what it used to be on lf6. So it's no good for me.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
xcrazydx said:
Yup! How's it working for you? It slowed down my data to about 2/3 of what it used to be on lf6. So it's no good for me.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
Yeah I also noticed a significant drop in LTE speeds. Maybe more around 5-10mbps slower.
Hi!
I stumbled across this post and was wondering which option I should download if I want to flash to a FP8 Stock ROM from my Tweaked 3.2 (FP5) ROM.
http://forum.xda-developers.com/showthread.php?p=40766145
Is this possible? Or will I have to return to stock FP5 first?
I am using a Droid Charge on FP5 running Tweaked 3.2. I have Clockwork Mod, Superuser, Titanium Backup, and ROM Manager installed. If possible, I would like to be able to flash it using my ROM Manager.
I want to do this to prep for the impending Tweaked on FP8 (and to shut up those OTA update notifications).
http://www.elementalxdesigns.com/ec...lipse-Droid-Charge-FP8-progress-build-4-15-13
Thanks!
You should return to stock ep4 and work your way up through software updates. I think there are 3 in total now. We don't have a stock Odin for fp1 or later.
Sent from my SCH-I510 using Tapatalk 2
JihadSquad said:
You should return to stock ep4 and work your way up through software updates. I think there are 3 in total now. We don't have a stock Odin for fp1 or later.
Sent from my SCH-I510 using Tapatalk 2
Click to expand...
Click to collapse
So I would essentially be losing my root and updating normally until I get the latest update and can root again?
superllama said:
So I would essentially be losing my root and updating normally until I get the latest update and can root again?
Click to expand...
Click to collapse
Yep
PaulN64007 said:
Yep
Click to expand...
Click to collapse
I did this, Now i cant seem to get CWM back... flashed 3 times using Odin... just goes to android recovery every time... any ideas? Thanks!!!
lbchsdigity said:
I did this, Now i cant seem to get CWM back... flashed 3 times using Odin... just goes to android recovery every time... any ideas? Thanks!!!
Click to expand...
Click to collapse
Check out this post...http://forum.xda-developers.com/showthread.php?p=42553223
Sent from my SCH-I510 using xda app-developers app