Is there something that could allow this? I mean, patch or flashing?
OTG
Sure!
OTG ( On - The - Go ) need a module ( or kernel build-in ) for this scope, we need a good kernel development ( like dhiru - UC - Vurrut and Bam ) to implement this, anyway we need wait there's no way to implement it without kernel supports
shy.less said:
Sure!
OTG ( On - The - Go ) need a module ( or kernel build-in ) for this scope, we need a good kernel development ( like dhiru - UC - Vurrut and Bam ) to implement this, anyway we need wait there's no way to implement it without kernel supports
Click to expand...
Click to collapse
Excuse me.. What about the hardware required??
rockyddroid said:
Excuse me.. What about the hardware required??
Click to expand...
Click to collapse
Omap3630 supports usb otg if im not wrong
Sent from my GT-I9003 using XDA
Yes it supports. There is a program named module loader. We can use it but we have to change inside of otg cable as I know. I didnt tried it and never heared about it works or not.
Sent from my GT-I9003 using XDA
rockyddroid said:
Excuse me.. What about the hardware required??
Click to expand...
Click to collapse
Hardware required is the same for all phone, change in base of chipset, Omap3630 support it , but because android is like a PC, not need only OTG module , behind there are a lot of work can change base to phone, not only to compile the module and modprobe it ^^
devilhell007 said:
Omap3630 supports usb otg if im not wrong
Sent from my GT-I9003 using XDA
Click to expand...
Click to collapse
Sure!
if i'm not wrong, all usb-capability phone support OTG ^^ becouse its software side and not hardware side
muhsino said:
Yes it supports. There is a program named module loader. We can use it but we have to change inside of otg cable as I know. I didnt tried it and never heared about it works or not.
Sent from my GT-I9003 using XDA
Click to expand...
Click to collapse
Sure, but we need kernel compiled which have otg, usb and other module compiled as module or build-in
Related
About
Based on Lupohirps kernel sources I present Icy.Kernel.
By request I made two branches, one with multitouch fix and one without.
Click to expand...
Click to collapse
Changelog
1.0 Recompile from Lupohirps sources with ext2/3/4 enabled
1.1 Added improved touchscreendriver from Der_Caveman
23 feb. Changed branches
Standard Icy.Kernel
1.0.1 Fixed WiFi
1.0.2 Based on cm-sources
Fixed ext4
Added tun.ko for vpn support
Improved Icy.Kernel (with multitouch fix)
1.1.1 Fixed WiFi
3.0 Alpha kernel
Click to expand...
Click to collapse
Installation
1 - Reboot into recovery
2 - Flash kernel version from this topic
3 - Reboot
4 - Done!
Click to expand...
Click to collapse
Downloads
Latest Standard version
Latest Improved version
Latest 3.0 kernel
Click to expand...
Click to collapse
Github for 3.0 kernel (still a WIP!!!)
Bugs:
No wifi in 1.0.2.
Thanks to have built it
Downloading...
I don't think includng the touch fix will be good.
It makes system choppy.
Thanks _Arjen_ , can u kindly tell us whats change-log ?
GonDr said:
Thanks _Arjen_ , can u kindly tell us whats change-log ?
Click to expand...
Click to collapse
Go back to the first post and actually READ IT this time....
I just pressed the 'Thanks' button. Sorry for that. We all know you make no contributions on development to our phone.[/sarcasm]
Seriously, it's just great. I'm looking forward to all the surprises you can come up with in this kernel.
MaKTaiL said:
I don't think includng the touch fix will be good.
It makes system choppy.
Click to expand...
Click to collapse
I agree. I would even suggest that he could include the stock touch screen driver. (if I'm not mistaken the stock ICS kernel has the driver made by franco which has this drawback of stuttery scrolling)
yuripg1 said:
I just pressed the 'Thanks' button. Sorry for that. We all know you make no contributions on development to our phone.[/sarcasm]
Seriously, it's just great. I'm looking forward to all the surprises you can come up with in this kernel.I agree. I would even suggest that you include the stock touch screen driver (if I'm not mistaken the stock ICS kernel has the driver made by franco which has those drawbacks of stuttery scrolling.
Click to expand...
Click to collapse
Stock driver would be great! I couldn't care less for performance on games.
I just want a phone smooth enough for all other tasks.
See CM7 Nightlies for instance, that kernel has stock touchscreen and it's smooth as hell.
Is it only a recompile of the sources from lupohirp? when not would be nice you could put your changes on github too.
MaKTaiL said:
Go back to the first post and actually READ IT this time....
Click to expand...
Click to collapse
I know what there in first post and no changlog !! there is one thing, Based on Lupohirps kernel sources
so if u seen any changelog plz tell me, thanks
Will consider it, guess I can make two branches, one with the multitouch-fix and one without
woglinde said:
Is it only a recompile of the sources from lupohirp? when not would be nice you could put your changes on github too.
Click to expand...
Click to collapse
When changes are added I will upload it to GitHub
As stated version 1 is a recompile with ext4 support.
_Arjen_ said:
When changes are added I will upload it to GitHub
As stated version 1 is a recompile with ext4 support.
Click to expand...
Click to collapse
Thanks _Arjen_, sorry for my question i'm a noob but is there a plan in future to bring kernel 3.x to p500 ?
GonDr said:
I know what there in first post and no changlog !! there is one thing, Based on Lupohirps kernel sources
so if u seen any changelog plz tell me, thanks
Click to expand...
Click to collapse
Ext4 support.
Sent from my LG-P500 using xda premium
MaKTaiL said:
Ext4 support.
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Thanks but i know it also.
Two versions would be great. Can you consider including the touch driver from CM7 nightly?
Sent from my LG-P500 using xda premium
MaKTaiL said:
Two versions would be great. Can you consider including the touch driver from CM7 nightly?
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Will take a look at it and compare with the driver from Franco's sources to see if there are any differences.
First post updated!
BUG: I do not recognize the WiFi signal.
Greetings !
_Arjen_ said:
About
Bugs
Wifi not working!!!
Click to expand...
Click to collapse
Wifi is not working because wifi module is broken.
I know it's broken , but you are wrong about the size
Rebuilding again to get new modules
When beta4 release I will test your kernel .....
Is there any way to enable usb on-the-go on a rooted Explorer with custom rom?
If there is any kernal that enables OTG please to name it
Thank you
darkmystel said:
Is there any way to enable usb on-the-go on a rooted Explorer with custom rom?
If there is any kernal that enables OTG please to name it
Thank you
Click to expand...
Click to collapse
As of now, there is no way to do so, May sakindia123 include this thing in his kernel 3.0(if possible).
Ashwa said:
As of now, there is no way to do so, May sakindia123 include this thing in his kernel 3.0(if possible).
Click to expand...
Click to collapse
Thats pretty sad
hope one comes soon
Hi guys,
After purchasing XL I know that Xperia L officially doesn't support USB OTG, how to mod and get this enable?
Please help guys!!
Anybody???
Help me
Please help me out because I've already bought a OTG cable and its not working.
[email protected] said:
Please help me out because I've already bought a OTG cable and its not working.
Click to expand...
Click to collapse
Sony Xperia L doesn´t support USB OTG in an official way
Screw around with some stuff and try to figure out how to develop USB Otg support. Or maybe ( if you're too lazy. ) request USB OTG in a popular ROM. Are you even unlocked or rooted? You just bought your Xperia but who knows?
Sent from my LG-LS970 using xda app-developers app
jonahly said:
Are you even unlocked or rooted? You just bought your Xperia but who knows?
Click to expand...
Click to collapse
Am rooted with motochopper and BL locked.
Yeah, I don't get how there is no support, will wait for 4.2.2 to see if support is added
Let see, hope they will add this.
looks like its not supported
http://talk.sonymobile.com/message/491552#491552
Just noticed that the sp isnt listed. So maybe the list was made early this year.
billbond4 said:
Just noticed that the sp isnt listed. So maybe the list was made early this year.
Click to expand...
Click to collapse
Don't think so, It has Xperia Z listed there,, also the post date is Jun 20, 2013 10:10 AM.
Solution
[email protected] said:
Hi guys,
After purchasing XL I know that Xperia L officially doesn't support USB OTG, how to mod and get this enable?
Please help guys!!
Click to expand...
Click to collapse
Well , first you need to root your device then you install StickMount app by Chainfire in google play then when you insert pendrive then click on mount option over there then download File Manager by Rhythm Software in google play then at path :sdcard/" you will get a folder over there , enjoy now you can use otg on a non- supportable device
DevThemCon said:
Well , first you need to root your device then you install StickMount app by Chainfire in google play then when you insert pendrive then click on mount option over there then download File Manager by Rhythm Software in google play then at path :sdcard/" you will get a folder over there , enjoy now you can use otg on a non- supportable device
Click to expand...
Click to collapse
Can you post the stickmount apk here as I can't find it? Thanks
https://play.google.com/store/apps/...wsMSwxLDEsImV1LmNoYWluZmlyZS5zdGlja21vdW50Il0.
You cannot find it as it not for our phone.
damian01211 said:
https://play.google.com/store/apps/...wsMSwxLDEsImV1LmNoYWluZmlyZS5zdGlja21vdW50Il0.
You cannot find it as it not for our phone.
Click to expand...
Click to collapse
I found the app, but still the usb isn't mounting
billbond4 said:
I found the app, but still the usb isn't mounting
Click to expand...
Click to collapse
In my way. It'll never works if ROM doesn't supported it.
For example my nexus 7, using stock ROM rooted and installed Nexus Media Import(USB OTG Mount) didn't work. But while changed to Custom ROM that in Settings - Storage that available if u have USB-OTG for mounting it works. so Basically it will supported by ROM that have feature for USB-OTG Mounter.
DevThemCon said:
Well , first you need to root your device then you install StickMount app by Chainfire in google play then when you insert pendrive then click on mount option over there then download File Manager by Rhythm Software in google play then at path :sdcard/" you will get a folder over there , enjoy now you can use otg on a non- supportable device
Click to expand...
Click to collapse
didnt get stickmount app in playstore.
it was done for nexus 4, so i think can be done for XL too. however, you may need otg y cable to get 5v if device doesn't supply (like N4 users do)
usb otg
Hello, everybody.
I have discovered that with "USB OTG Helper" from Play Store
you can have OTG on Xperia L.
But Xperia L doesn`t give power to the stuff I´ve plugged in.
So I used a hub with external power supply and a wall outlet
adaptor to connect my pendrive and it works.
Hope I´ve helped you all.
Hi all, Here is the answer
http://forum.xda-developers.com/showthread.php?t=2427150
Hi, I repaired my XL!!!
And I port 4.3 for our Xperia L.
It's only alpha so much isn't working.
Credits:
-Me (like81)
-varun.chitre15 for ThunderZap kernel
Screenshots
Alpha#1
Not working:
-Camera
-Radio (calls, sms, etc.)
-You tell
Bugs:
-Graphical issues (wrong color scheme, etc.)
-lags(freezes)
-Internal storage only 2GB (as in CM)
Click to expand...
Click to collapse
Download:
Rom
Kernel
Who can add to this kernel CWM? I can't do it!
Finally you are back Nice work and i will try to help you.
P.S.- So only camera and radio module isnt working ? All other things working correct ?
thanx
MultiTouch fixed ?
david makarove said:
thanx
MultiTouch fixed ?
Click to expand...
Click to collapse
I didn't test it. But I also launched 4.2 from Xperia M and multitouch worked the same way.
I think that multitouch driver located in the kernel.
Nice work:good: Is this 4.3 stable? Can be used as a daily rom?
EDIT: oh, sorry, now i see non-working list. I will try it ASAP when Radio module will be fixed.
aleksander002 said:
Nice work:good: Is this 4.3 stable? Can be used as a daily rom?
Click to expand...
Click to collapse
No, it is the first build! It's very unstable.
like81 said:
Download:
Rom
Kernel
Who can add to this kernel CWM? I can't do it!
Click to expand...
Click to collapse
did u try graphics fix of KitKat it might work
Wow, really good to see someone ported it. I thought most things will work as they nearly the same.
Also I think I know why there's problem with internal storage. Both XM and XSP have only one partition for user data and apps but our XL have two partitions. One for apps and one for user data. If we repartition it maybe all 5.5 GB will be available for us without patching it in order to work.
yash989 said:
did u try graphics fix of KitKat it might work
Click to expand...
Click to collapse
What is this fix?
damian01211 said:
If we repartition it maybe all 5.5 GB will be available for us without patching it in order to work.
Click to expand...
Click to collapse
how to repartition it? We use data partition as internal storage...
like81 said:
What is this fix?
Click to expand...
Click to collapse
http://d-h.st/oVf
damian01211 said:
Wow, really good to see someone ported it. I thought most things will work as they nearly the same.
Also I think I know why there's problem with internal storage. Both XM and XSP have only one partition for user data and apps but our XL have two partitions. One for apps and one for user data. If we repartition it maybe all 5.5 GB will be available for us without patching it in order to work.
Click to expand...
Click to collapse
But then when you go back to stock rom you may have problems.
like81 said:
how to repartition it? We use data partition as internal storage...
Click to expand...
Click to collapse
You have to copy all stuff from internal to your SD. I've don't know how to do it on XL, it was done on XT.
siankatabg said:
But then when you go back to stock rom you may have problems.
Click to expand...
Click to collapse
Yee, your right. As in FTF there's partition file which partition the phone memory's.
No radia is a issue related to baseland version. So you need to update baseland from xperia M(port it) to get gsm.
Sent from my C1905 using Tapatalk
icoolguy1995 said:
No radia is a issue related to baseland version. So you need to update baseland from xperia M(port it) to get gsm.
Sent from my C1905 using Tapatalk
Click to expand...
Click to collapse
I thing that there is no chance to port baseband,because it's closed source. Correct me if I'm wrong.
So we need to make it to work with our baseband. I really want to try to help with porting this rom , but I'm using my XL as main phone so I need it fully working
Sent from my C2105 using xda app-developers app
siankatabg said:
I thing that there is no chance to port baseband,because it's closed source. Correct me if I'm wrong.
So we need to make it to work with our baseband. I really want to try to help with porting this rom , but I'm using my XL as main phone so I need it fully working
Sent from my C2105 using xda app-developers app
Click to expand...
Click to collapse
Cant we flash only baseband from flashtool
i know we can do this so whose up for testing?
EDIT: As the rom is ported one it might have the baseband of xperia m and thats why RIL is not working
And i'm far from internet now (Using a 2G connection) still someone of you can try to flash the baseband of xperia l using flashtool
Me_Shazzy said:
Cant we flash only baseband from flashtool
i know we can do this so whose up for testing?
EDIT: As the rom is ported one it might have the baseband of xperia m and thats why RIL is not working
And i'm far from internet now (Using a 2G connection) still someone of you can try to flash the baseband of xperia l using flashtool
Click to expand...
Click to collapse
I will try it downloading the Rom now xD
EDIT: Rom isnt starting up only a Bluescreen appears an then it tunrs off
XperiaAwesome2000 said:
I will try it downloading the Rom now xD
EDIT: Rom isnt starting up only a Bluescreen appears an then it tunrs off
Click to expand...
Click to collapse
Reboot again.If it not working just reflash,but this time format "system" from recovery,because updater-script will not do it automatically(missed command).
P.S.-I think that baseband files are placed in other partition,not in system.You can try to flash baseband from stock XL ftf,but I'm pretty sure that this will not work.
GOTO (if you want a supported kernel) : https://forum.xda-developers.com/redmi-note-4/xiaomi-redmi-note-4-snapdragon-roms-kernels-recoveries--other-development/kernel-nethunter-oreo-mido-t3768887
What is NetHunter ?
The Kali Linux NetHunter project is the first Open Source Android penetration testing platform for Nexus devices, created as a joint effort between the Kali community member “BinkyBear” and Offensive Security. NetHunter supports Wireless 802.11 frame injection, one-click MANA Evil Access Point setups, HID keyboard (Teensy like attacks), as well as BadUSB MITM attacks – and is built upon the sturdy shoulders of the Kali Linux distribution and toolsets.
Click to expand...
Click to collapse
Features
All listed in ElectraBlue,
CD-ROM emulation,
Wireless frame injection,
and many external wifi cards drivers.
How to install it ?
BACKUP ! ALWAYS BACKUP !!
Unlock your bootloader
Install TWRP recovery
Flash the zip
Enjoy !
Download : https://www.dropbox.com/s/qt8ybgypl4wa0ex/NetHunter-2017-10-01_628-v1.0.zip?dl=1
[qrcode]https://www.dropbox.com/s/qt8ybgypl4wa0ex/NetHunter-2017-10-01_628-v1.0.zip?dl=1[/qrcode]
Thanks to :
@pelya for his keyboard patch
Aircrack for the injection patch
Frozen Cow for inspiring me the CD-ROM patch
Offensive Security team
@LordArcadius for the kernel.
Please tell me if external wifi cards work !
XDA:DevDB Information
NetHunter, Kernel for the Xiaomi Redmi Note 4
Contributors
Musikid64
Source Code: https://github.com/MusiKid/NetHunter_mido
Kernel Special Features:
Version Information
Status: Alpha
Created 2017-09-26
Last Updated 2018-04-18
Reserved
I going to test and after the installation (clean, wipe and etc.) wifi on my phone dont working. its my first feelings.
Edit:
Wifi internal and external otg cards dont working.
marconit1991 said:
I going to test and after the installation (clean, wipe and etc.) wifi on my phone dont working. its my first feelings.
Edit:
Wifi internal and external otg cards dont working.
Click to expand...
Click to collapse
Ok I will work on it.
Musikid64 said:
Ok I will work on it.
Click to expand...
Click to collapse
can work it on miui?
Whats the use of this kernel??
OMG!
The long awaited is coming...
Thanks for developing, I am excited to test it
Thanks
Edit: Is there any bugs provided?
v1da said:
OMG!
The long awaited is coming...
Thanks for developing, I am excited to test it
Thanks
Edit: Is there any bugs provided?
Click to expand...
Click to collapse
Yes, the WIFI seems to bug for some guys.
I work on it.
Musikid64 said:
Yes, the WIFI seems to bug for some guys.
I work on it.
Click to expand...
Click to collapse
can flash on miui?
jax666 said:
can flash on miui?
Click to expand...
Click to collapse
Idk
Musikid64 said:
Idk
Click to expand...
Click to collapse
what;
jax666 said:
what;
Click to expand...
Click to collapse
It's not working in MIUI sorry
Does it support external wifi card TL-WN722N in kali nethunter rom...please tell me and thanks for developing this kernal..:fingers-crossed::fingers-crossed:
apoorv2711 said:
Does it support external wifi card TL-WN722N in kali nethunter rom...please tell me and thanks for developing this kernal..:fingers-crossed::fingers-crossed:
Click to expand...
Click to collapse
This rom originally suport tl-wn722n (originally like xiaomi redmi note 3). The port (unofficial) realese has problems with support any external wifi card. I hope so kernel in this topic rapair problems with nethunter
Dear colleagues, are you also like me? After calling the airmon-ng command (first image) and after running the wlan1 monitor (second image).
Musikid64 said:
Features
All listed in ElectraBlue
+ HID keyboard (like Ducky),
CD-ROM emulation,
Wireless frame injection,
and many external wifi cards drivers.
Click to expand...
Click to collapse
Are you the author of all code of that patches? If - no, why you not "cherry-pick" them?
BrateloSlava said:
Are you the author of all code of that patches?
Click to expand...
Click to collapse
No, that's why I provided a link to them in the topic (Thanks section)
And what means cherry-pick ?
Musikid64 said:
And what means cherry-pick ?
Click to expand...
Click to collapse
Cherry-pick
BrateloSlava said:
Cherry-pick
Click to expand...
Click to collapse
Thanks dude. Do you know how to do it with patches and not commits ?
Musikid64 said:
Thanks dude. Do you know how to do it with patches and not commits ?
Click to expand...
Click to collapse
Forgot it. I found the way and thanks !
I don't want to steal people's work, it just that I wasn't knowing about this