Database Info

(Crackflashers)(ROM) (wip) Compiled from cm7 source

I have been compiling the cm7 source and sharing. Gapps and rom boots and work. It is more basic gingerbread aosp then cm7. Cyanogen and teamdouche have been working to get this together and this is more kinda like a nightly
www.crackflashers.com
You will need to flash the new recovery.img to flash/get working gapps.
after flashing gapps, run fix permissions to get gapps to work.
This is cause of cm7 going to ext4 based system unlike older roms that are ext3
The new recovery does make it so you can not use older pre gingerbread roms so find a older recovery to fastboot back to anything like froyo or restore old backups
Sent from my HTC Vision using XDA App
Apn might be missing if you can not connect to data. You can find a apn list here at the end of the op http://forum.xda-developers.com/showthread.php?t=892808
Guide to flashing on emmc devices (vision,ace, glacier) change vision to ace for this
http://forum.xda-developers.com/showthread.php?t=909714

So this does not include gapps?
Do you know when cwmr 3.0 will be avail in rom manager?

nandihno said:
So this does not include gapps?
Do you know when cwmr 3.0 will be avail in rom manager?
Click to expand...
Click to collapse
The gapps are posted on on that link also not built in, building in causes bootloops. Don't have any clue when it will be in rom manager, the one uploaded is the recovery.img built with the source
Sent from my HTC Vision using XDA App

so how is this compile compared to kali's release?

Omg more roms to flash. Cheers buddy.

hehe m0x your getting busy
maybe you should start up a review site lets us know whats good and bad

capychimp said:
so how is this compile compared to kali's release?
Click to expand...
Click to collapse
Yea i want to know the same thing, as kalis version has gapps bundle into it.which i think is a better solution given that cam 3 i not out in rmom manage yet
Am guessing video is not yrt supported right ?

nandihno said:
Yea i want to know the same thing, as kalis version has gapps bundle into it.which i think is a better solution given that cam 3 i not out in rmom manage yet
Am guessing video is not yrt supported right ?
Click to expand...
Click to collapse
I don't know cali's version. I just posted it cause I built it for someone else and he confirmed working. It is repo synced from the cm7 gingerbread source at about 7pm.
I don't have a desire hd so I can not confirm what is or isn't working
Sent from my HTC Vision using XDA App

nandihno said:
Yea i want to know the same thing, as kalis version has gapps bundle into it.which i think is a better solution given that cam 3 i not out in rmom manage yet
Am guessing video is not yrt supported right ?
Click to expand...
Click to collapse
The first RC0 version that was posted wasn't built by kali-

Anyone tired this ?

mero01 said:
Anyone tired this ?
Click to expand...
Click to collapse
Its slightly more advanced along in development than the other version. ADW is now the default launcher. Haven't noticed any difference apart from that.

dr.m0x said:
Its slightly more advanced along in development than the other version. ADW is now the default launcher. Haven't noticed any difference apart from that.
Click to expand...
Click to collapse
seem more stable ?

mero01 said:
seem more stable ?
Click to expand...
Click to collapse
Really it seems the same. Looking good.

dr.m0x said:
Really it seems the same. Looking good.
Click to expand...
Click to collapse
so how did u flash the gapps? via cwm recovery 3.0? or is there another way..
if there is no other way i preffer to wait till rom manager has cwm 3.0...makes things easier and safer
also ..is video camera still not working?

I have just flashed this new Rom using cmw 3.
I had to manually configure my apn.
The video-camera is still not working...
But beside this it is looking good!
Ok, it's not usable for me because i cann't get the network to work

New version up guys.

dr.m0x said:
New version up guys.
Click to expand...
Click to collapse
Where do you find that? Followed the link in first post and its just the same as before. Can you share a link maybe

How do you flash img file normally do it by zip?
HTC HERO - HTC HD2 - NOW HTC DESIRE HD & SAMSUNG GALAXY S Bring on the modding.

nickwarn said:
Where do you find that? Followed the link in first post and its just the same as before. Can you share a link maybe
Click to expand...
Click to collapse
I meant new version since thread started. The 11.30am version. Sorry for any confusion.
Sent by the air.

Anyone tried Bluetooth with this build?
I cant get pairing with my car working with any cyan build yet ...
Just wanted to know if anyone tested this yet
Thx ahead
Sent from my Desire HD using XDA App

[KERNEL][3.0.8] Dirty Kernel for Bravo - Build on last page! [7TH BUILD - PAGE 19]

See page 19 for the seventh build.

Good job! Nice and clean in a new topic. KUTGW!
Sent from my HTC Desire using XDA App

Freaging sweet!
(sorry for spam but this is exciting)

Excellent stuff.
So will that mean close to full HWA?

If we're running any of the ICS builds which have the hardware hacks, this applies, right?
texasice said:
@ those who flashed Chaosz-X new kernel you need to remove this line from build.prop
Code:
ro.config.disable_hw_accel=true
Click to expand...
Click to collapse

@rootSU: I think it does, because it scores almost the same as GB Sense ROMs, and it gets pretty decent FPS at Quadrant (certainly smooth enough), so I think it works fine.
@pnw: haven't tested that, but you can give it a try, it seems pretty logical that it would help

Can't wait for the 3.0 kernel
Sent from my HTC Desire using XDA App

I flashed this on the p2 build, but my wifi would not turn on... I reverted back to my nandroid right before the flash...
sent from my HTC desire using xda premium

mattmanwrx said:
I flashed this on the p2 build, but my wifi would not turn on... I reverted back to my nandroid right before the flash...
sent from my HTC desire using xda premium
Click to expand...
Click to collapse
chaoz tried including the wifi module you use in the kernel in the system/lib folder? can't find it there on the newest kernel. This messed things up for tristan earlier

Oh crap, forgot to supply the bcr4329.ko indeed.
I'm going to try to get a running 3.0 by tonight, if I don't have it finished this evening, I'll upload the WiFi module from the build (using 2 different OS's to work on, Linux for compiling, and Windows for everything else, and working in Win is much easier for me ;p)
Edit: beginning with the really lame methods of getting 3.0 to run, first attempt is done I think, just copied over files, and modified some of them, nothing really special, starting compiling in 5 minutes.

I flashed over p2 with the camera fix and the camera no longer works. Should I reapply the camera fix?

*child said:
I flashed over p2 with the camera fix and the camera no longer works. Should I reapply the camera fix?
Click to expand...
Click to collapse
But does your wifi work? It didn't work for me...
Not too sure about the camera... it should work... as the added is just libs... the kernel does look at the libs, but doubt it would make a difference... just my guess...
sent from my HTC desire using xda premium

Wifi did not for me. Camera worked but I didn't test it extensively.
Sent from HTC Desire

Camera and wifi doesnt work But HW ac. is fine more speed

Wi-Fi also does not work

Chaosz-X first of all, thanks for the work you've done so far. I believe i can port it over to the n1 using the zip you uploaded. Second, please learn git so you can push your changes to github. (i know you said you hate git but, youre developing a kernel; in comparison git is way easier to understand) It will be much easier for other devs to follow your progress, and port your changes to other qsd8k devices badly in need of hwa.

texasice said:
Chaosz-X first of all, thanks for the work you've done so far. I believe i can port it over to the n1 using the zip you uploaded. Second, please learn git so you can push your changes to github. (i know you said you hate git but, youre developing a kernel; in comparison git is way easier to understand) It will be much easier for other devs to follow your progress, and port your changes to other qsd8k devices badly in need of hwa.
Click to expand...
Click to collapse
cant wait 3.0 kernel for n1

texasice said:
Chaosz-X first of all, thanks for the work you've done so far. I believe i can port it over to the n1 using the zip you uploaded. Second, please learn git so you can push your changes to github. (i know you said you hate git but, youre developing a kernel; in comparison git is way easier to understand) It will be much easier for other devs to follow your progress, and port your changes to other qsd8k devices badly in need of hwa.
Click to expand...
Click to collapse
How could he even develop a linux kernel if he is better in using windows? Dont you have to be a kernel dev to do those things?
Some devs are crossing strange lines - 4 sure . Hope you get it done for our Nexus ONE my friend
cheers

sweet..kernel 3.0!!
waiting ..waiting..

bunnahabhain said:
How could he even develop a linux kernel if he is better in using windows? Dont you have to be a kernel dev to do those things?
Some devs are crossing strange lines - 4 sure . Hope you get it done for our Nexus ONE my friend
cheers
Click to expand...
Click to collapse
People start with windows at a young age
Sent from my HTC Desire using xda premium

[Q] CM7 in emulator (AVD)

Hi all, this is a question even if i smell development spirit...
Maybe you know that i was about releasing KMApp v2.0 but didn't. This is because i cannot debug with my phone as i need it up and running fine for my job / university. I can't do testing so i asked people to do it for me and they were very kind. Unfortunately, tests i wanted to do are difficult to explain, resulting in wrong results.
So i changed point of view and started to think about AVD.
Is it possible to run CM7 for our device in emulator?
Did someone ever try it?
If you succeded please post detailed steps, if you know it is not possible explain why.
PS: i say CM7 and not samsung froyo because i don't see the point on being stuck with froyo. CM7 is stable enough to be used so KMApp v2.0 will be tested only in CM7. I will move to CM9 when it will be as stable as CM7 because now i don't feel it is.

You can try this - http://forum.xda-developers.com/showthread.php?t=553366

ak700 said:
You can try this - http://forum.xda-developers.com/showthread.php?t=553366
Click to expand...
Click to collapse
RapidShare link broken :/

ak700 said:
You can try this - http://forum.xda-developers.com/showthread.php?t=553366
Click to expand...
Click to collapse
I see this is for android 1.5... Are you sure it still works with GB??
A LOT has changed since then!

Probably not. I had a look at it blog /website. It some what made use of the android sdk but with a better UI. The only way to simulate a rom would be to force it run instead of the os that runs in the sdk.
When ics was released many devs created a rom from the sdk by some how extracting the os from the sdk. So if you are able to some how replace that os with cm7 and then run the avd you would have your cm7 simulated. It's pretty hard but I think that's the only way.
Sent from my GT-I5800 using xda premium

Let's Get CM10 Booted

Let's try get cm10 too boot atleast im downloading the sources i read a few guides every omap4 device except the lg optimus 3d is either running cm9 or cm10 im gonna try to get it to atleast boot even if nothing else work right well something todo till lg decides to do the upgrade. by the way in the GB Sources for the lg p940 in the kernel sources it contains stuff to do with our phone driver wise i think the only thing that differs is camera + ram.

anybody tried it before?

I'm thinking of trying it, please link the guides you've found!
Sent from my LG-P920 using xda app-developers app

Good luck guys we are all "rooting" (hahah get it, get it ) for you guys , defcomg are you going to try and port the prada ics first and then cm10, or directly ??

If you're hell bent on trying, I would suggest porting a mixture of the Prada ICS and CM10: Prada ICS for most of the drivers and code to make things work and CM10 for the base. This is because you have the CM10 source so it's easy to modify what doesn't work, since the Prada ICS kernel probably won't work out of the box anyway. You could port Prada ICS wholesale but I suspect more things won't work that way given CyanogenMod often has open source blobs for most of the drivers and for whatever chips that are different from the Prada phone whose drivers you need.

defcomg said:
anybody tried it before?
Click to expand...
Click to collapse
yes, but i got an non booting ramdisk + a zipp without media, fonts, vendor and apps.
but it could also be that i have failed, today i will tray it again so let's hope somebody will make it

FPtje said:
I'm thinking of trying it, please link the guides you've found!
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
http://www.kernel-xp.net/index.php/en/guide/25-android/32-compilare-cm10
http://wiki.cyanogenmod.com/wiki/Building_from_source
http://forum.xda-developers.com/showthread.php?t=1668483&highlight=build+cm9+source
http://forum.xda-developers.com/showthread.php?t=1668396
http://forum.xda-developers.com/showthread.php?t=1807505&highlight=build+cm10
rezzsha said:
Good luck guys we are all "rooting" (hahah get it, get it ) for you guys , defcomg are you going to try and port the prada ics first and then cm10, or directly ??
Click to expand...
Click to collapse
Was gonna port it directly i was gonna run a comparison on winhex to see how the kernels differ
pandaball said:
If you're hell bent on trying, I would suggest porting a mixture of the Prada ICS and CM10: Prada ICS for most of the drivers and code to make things work and CM10 for the base. This is because you have the CM10 source so it's easy to modify what doesn't work, since the Prada ICS kernel probably won't work out of the box anyway. You could port Prada ICS wholesale but I suspect more things won't work that way given CyanogenMod often has open source blobs for most of the drivers and for whatever chips that are different from the Prada phone whose drivers you need.
Click to expand...
Click to collapse
Repo failed have to start over damn i think i have identified a few chips. if there was a way to get the kernel what drivers are loaded

Well that's new. Did you do repo init, repo sync and also installing all the dev tools as recommended here (http://source.android.com/source/initializing.html)? To extract the drivers, you'll have to decompile the Prada ICS kernel, extract the drivers, find a CM10 supported device with similar hardware, replace drivers for the different hardware, do a bit of coding to set up a new CM branch on your com and set up brunch/lunch and vendorsetup/makefile and fill it up with the files mentioned above and see if you can compile it.

http://processors.wiki.ti.com/index.php/TI-Android-ICS-PortingGuide
Hope this helps! Good luck!
Sent from my phone.

good luck and hope you manage this would be amazing. A big thank you just for your effort

I just started a new cm9 build with prada ics kernel but with my lame pc it will take some time.

pandaball said:
Well that's new. Did you do repo init, repo sync and also installing all the dev tools as recommended here (http://source.android.com/source/initializing.html)? To extract the drivers, you'll have to decompile the Prada ICS kernel, extract the drivers, find a CM10 supported device with similar hardware, replace drivers for the different hardware, do a bit of coding to set up a new CM branch on your com and set up brunch/lunch and vendorsetup/makefile and fill it up with the files mentioned above and see if you can compile it.
Click to expand...
Click to collapse
Closest Device Running CM10 Same SOC
[JB]Samsung I9100G - https://github.com/CyanogenMod/android_device_samsung_i9100g/tree/jellybean
[ICS]LGE P940 - https://github.com/milaq/android_device_lge_p940
Would This Work Replace the LIBS and Configs in devices/samsung/i9100g with the ones from Prada Compile then in the OUT Folder replace WIFI MOdule wpa_sup the issue here is the kernel i can modify the ICS Kernel of the Prada to Match that of the p920 most things are the same its only a few files that change when kernel is compiled should i just place it on the root of the device folder?

I din't know if that stuff that I think make sense but wouldn't it be better if we try to make at first
a working cm9 zip, and after that try to port cm10? It's because there are already some tutorials of how
to "converting" ics into jellybean.
I also started again building a cm9 build, this time with ics prada kernel source and
the command
Code:
make otapackage
instead of brunch p920.
But it will take some time to compile that because my PC isn't the best (single core 2.8 ghz Intel celeron with 2gb RAM)

This looks way too difficult for me. While I might be able to build Android, I'll have no clue on how to debug or fix issues.

berni987654321 said:
I din't know if that stuff that I think make sense but wouldn't it be better if we try to make at first
a working cm9 zip, and after that try to port cm10? It's because there are already some tutorials of how
to "converting" ics into jellybean.
I also started again building a cm9 build, this time with ics prada kernel source and
the command
Code:
make otapackage
instead of brunch p920.
But it will take some time to compile that because my PC isn't the best (single core 2.8 ghz Intel celeron with 2gb RAM)
Click to expand...
Click to collapse
Well Im Runnning UBUNTU on VMware left it compiling a test build i have two Sources JB/CM @ Android/system ICS/ASOP @ Working_Directory. i just thought it would be much easier to just complile cm10 instead of cm9 then cm10 let me know how your build goes. The Prada Kernel is it modded for P920 or is it stock.
Most tutorials to Compile from Source are not good maybe we could ask codeworx for help he got JB Running on the i9100g
The Needs to be a Convert CM7 to CM9 to CM10 Guide.

FPtje said:
This looks way too difficult for me. While I might be able to build Android, I'll have no clue on how to debug or fix issues.
Click to expand...
Click to collapse
i know what you mean before attempting this i had not even used linux but guides and tuts can only get you so far when Ricardo had a working cm9 all that was whacked was the dsp this was before the lg prada it now has ics wonder why he did not get required dsp drivers and modules from prada ics source it would be cool if he released CM9 at whatever state its in im sure we would manage to get it fully functional

defcomg said:
i know what you mean before attempting this i had not even used linux but guides and tuts can only get you so far when Ricardo had a working cm9 all that was whacked was the dsp this was before the lg prada it now has ics wonder why he did not get required dsp drivers and modules from prada ics source it would be cool if he released CM9 at whatever state its in im sure we would manage to get it fully functional
Click to expand...
Click to collapse
Well I dont thinks so that's gonna happend, I just asked him that on G+ and he said "No".

this time i managed to get apps but who finds the fail?

berni987654321 said:
this time i managed to get apps but who finds the fail?
Click to expand...
Click to collapse
Fail? is it the apps only are the other folder libs etc bin also compiled?
My build was taking to long so i stopped it will attempt again in the weekend this Source Compilation is way hectic

I meant that there's a nfc.apk in the app folder xD . My computer is now working since 9 hours.
app, etc, framework, fonts should be ready but there are some libs missing and I don't know about
the other folders so let's hope that I'm getting this atleast to the cm9 bootanimation.
---------- Post added at 10:15 PM ---------- Previous post was at 10:08 PM ----------
my terminal is completly full just with compiling libwebcore -_-'

android develpment

i want to know how to build rom,porting rom from starting
please can you provide me the link of offline or online guied

http://forum.xda-developers.com/showthread.php?t=1661770 Go go go

shortyoko said:
http://forum.xda-developers.com/showthread.php?t=1661770 Go go go
Click to expand...
Click to collapse
you used this tutorial for you nextgen rom?? right

No! NExtGen is not mine! I'm just a user of it, because it gave me everithing that I need until there is CM9 at 100%(which may already happened, I've mist couple of the last builds)
This from the link that I gave you is enough to make whatever you want, whit any rom, or create your own from 0. So read it couple of times, watch the videos, to get the idea of rom making.

shortyoko said:
No! NExtGen is not mine! I'm just a user of it, because it gave me everithing that I need until there is CM9 at 100%(which may already happened, I've mist couple of the last builds)
This from the link that I gave you is enough to make whatever you want, whit any rom, or create your own from 0. So read it couple of times, watch the videos, to get the idea of rom making.
Click to expand...
Click to collapse
Thanks there are lots of guied of cooking custom rom this is one of them

You need to set up dsixda kitchen if you want to make roms like jaggyRom etc , you may run it on cygwin.
Kitchen is very easy
But if you want to compile a Rom, you must have linux or ubuntu.
Oprn terminal
Then get git at first
Then using git clone fommand copy the source of Rom you want to build-lets say aokp
Thrn you can start building
Sent from my HTC Explorer A310 using xda premium

try reading this
http://forum.xda-developers.com/showthread.php?t=1891046

i wanted to make roms like jaggyrom etc or based on stock rom
Which guide should i follow

Hpsgill said:
i wanted to make roms like jaggyrom etc or based on stock rom
Which guide should i follow
Click to expand...
Click to collapse
dsixda kitchn

hell_lock said:
dsixda kitchn
Click to expand...
Click to collapse
i learned dsixda kitchen completly but now i want to compile a rom(ics or jb) i installed ubuntooo on my desktop
can u please give me guide how to commpile rom kernal on ubuntoo

Hpsgill said:
i learned dsixda kitchen completly but now i want to compile a rom(ics or jb) i installed ubuntooo on my desktop
can u please give me guide how to commpile rom kernal on ubuntoo
Click to expand...
Click to collapse
Google for how to compile aosp. There u will find everything
Sent from my GT-S6102 using XDA