FOUND - Need 55.1.27.MB865.AsiaRetail.en.03 India retail firmware - Motorola Atrix 2

Hi,
I have an Indian Atrix 2. I recently rooted it and un-installed some system applications like Email and Gmail etc. using Titanium Backup without taking a backup. After doing it everything works fine but I am getting force closes every now and then with messaging app.
I am wondering if any Indian users here can post Indian Retail firmware backup so that I can update my phone back to factory state. I tried factory reset but that didn't help either.
Firmware version is 55.1.27.MB865.AsiaRetail.en.03, android 2.3.6.
UPDATE: Download "5.5.1-EDEM-27-SEARET_cfc.xml.zip" from http://sbf.droid-developers.org/edison/list.php
That's what I was looking for

If you tell me how, I'd be happy to help. I'm not yet rooted though.

athani said:
If you tell me how, I'd be happy to help. I'm not yet rooted though.
Click to expand...
Click to collapse
How to root 2.3.6 ---> http://forum.xda-developers.com/showthread.php?t=1396650
Then dowload and install A2 Bootstrap ---> http://forum.xda-developers.com/showthread.php?t=1346977
Then install CWM ROM Manager ---> https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager&hl=en
Run the bootstrap, reboot into recovery, and make a backup.. The system image will be stored on your sd card.
This is how one would do it with the US version, hope it all works for the Indian version..
Note that this will copy your system and data in it's current state... it won't give you the stock FXZ that you are looking for.. but you might be able to get clever and grab only the stock apps you need and push them to your device..

raj_sh06 said:
Hi,
I have an Indian Atrix 2. I recently rooted it and un-installed some system applications like Email and Gmail etc. using Titanium Backup without taking a backup. After doing it everything works fine but I am getting force closes every now and then with messaging app.
I am wondering if any Indian users here can post Indian Retail firmware backup so that I can update my phone back to factory state. I tried factory reset but that didn't help either.
Firmware version is 55.1.27.MB865.AsiaRetail.en.03, android 2.3.6.
Click to expand...
Click to collapse
Just thought of this, not sure if it will work - have someone with an your version of stock rooted A2 make a titanium backup of all the apps and data, then make a CWM backup as briefly described above, and get you a copy the backup file. Then, put it on your sd card in the clockworkmod/backup folder, use Titanium Backup and the "Extract from Nandroid" option. Choose the critical system apps that you need and restore (maybe the apps only, no data).
Actually, maybe you could skip the CWM part entirely and just copy the stock Titanium Backup files into your TB folder on your sd card..
Maybe somebody here knows a bit more about this? And can't you just get Gmail from the Play Store?

alteredlikeness said:
How to root 2.3.6 ---> http://forum.xda-developers.com/showthread.php?t=1396650
Then dowload and install A2 Bootstrap ---> http://forum.xda-developers.com/showthread.php?t=1346977
Then install CWM ROM Manager ---> https://play.google.com/store/apps/details?id=com.koushikdutta.rommanager&hl=en
Run the bootstrap, reboot into recovery, and make a backup.. The system image will be stored on your sd card.
This is how one would do it with the US version, hope it all works for the Indian version..
Note that this will copy your system and data in it's current state... it won't give you the stock FXZ that you are looking for.. but you might be able to get clever and grab only the stock apps you need and push them to your device..
Click to expand...
Click to collapse
Thanks, been a bit busy. This is exactly how it needs to be done. I have mine rooted, so I can use CWM to restore the backup taken this way. I would really appreciate the help.
I flashed all the custom roms but all are AT&T based, have lots of restrictions, like network selection doesn't work, tethering doesn't work, *#*#4636#*#* menu doesn't work.
This could be of help to other people too. If AT&T roms work on mine than I believe there's no difference in hardware on our's or US devices, so US people can flash it too to have a real android device with no restrictions whatsoever. And if a developer can create a custom rom based on this that would be wonderful.

athani said:
If you tell me how, I'd be happy to help. I'm not yet rooted though.
Click to expand...
Click to collapse
Will appreciate the help if you could do this for me. Its a little complicated process but once you follow the steps it is fairly easy, hardly took me 15 minutes to root. And please backup your apps after rooting with Titanium Backup and then factory reset and take a CWM backup here, that way none of your personal information will be there in backup file.
I know I am asking for something that will take some time.... I am around if you need help with any of the steps, do let me know.

raj_sh06 said:
Will appreciate the help if you could do this for me. Its a little complicated process but once you follow the steps it is fairly easy, hardly took me 15 minutes to root. And please backup your apps after rooting with Titanium Backup and then factory reset and take a CWM backup here, that way none of your personal information will be there in backup file.
I know I am asking for something that will take some time.... I am around if you need help with any of the steps, do let me know.
Click to expand...
Click to collapse
Hi. Yes, it may take some time the first time around. So I'll do it on Saturday. I'll PM if I need help.

athani said:
Hi. Yes, it may take some time the first time around. So I'll do it on Saturday. I'll PM if I need help.
Click to expand...
Click to collapse
Will apprecaite that, saturday will be good, I stay free that day

Hi. Unfortunately I got a lemon and have had to ask for a replacement. Flipkart have a 30 days returns policy so thank God for that. I won't be able to hep you for some days yet

athani said:
Hi. Unfortunately I got a lemon and have had to ask for a replacement. Flipkart have a 30 days returns policy so thank God for that. I won't be able to hep you for some days yet
Click to expand...
Click to collapse
Oh. Bad news that is, but good that you are covered. Not an issue, let me know when you get a new one, hopefully soon, goodluck with that

55.1.27.MB865.AsiaRetail.en.03 India retail firmware
athani said:
If you tell me how, I'd be happy to help. I'm not yet rooted though.
Click to expand...
Click to collapse
Hi,
Even m in need of 55.1.27.MB865.AsiaRetail.en.03 India retail firmware
so when will ya be uploading ?
---------- Post added at 08:04 PM ---------- Previous post was at 07:57 PM ----------
raj_sh06 said:
Hi,
I have an Indian Atrix 2. I recently rooted it and un-installed some system applications like Email and Gmail etc. using Titanium Backup without taking a backup. After doing it everything works fine but I am getting force closes every now and then with messaging app.
I am wondering if any Indian users here can post Indian Retail firmware backup so that I can update my phone back to factory state. I tried factory reset but that didn't help either.
Firmware version is 55.1.27.MB865.AsiaRetail.en.03, android 2.3.6.
Click to expand...
Click to collapse
Hi did Ya get wat ya had asked for - pls let me know if ya found the 55.1.27.MB865.AsiaRetail.en.03 India retail firmware... eveN m In need Of 1

Sorry mate, I didnt find what I was looking for so I gave it to service center. And they are processing a replacement for me. But just now I found this http://sbf.droid-developers.org/edison/list.php
Go to your phone's settings, about phone and see if you find below information listed there:
edison_emara-user 2.3.6 5.5.1-EDEM-27 70 release-keys2012-01-20 19:57 Off.Bld LUD_EDISON_R1E_PATCH_23_120120_1943 crh1090280_M570_PC_CARD_RAINB
If I remember our is same version as above. If it is, go to above link and download "5.5.1-EDEM-27-ASIAOPS_cfc.xml.zip" and flash it using RSD Lite. And if you find it risky, just extract system.img from this zip file and go to fastboot mode (vol up+vol down and power on, select AP Fastboot) and in cmd type fastboot flash system system.img and it should flash system image only to your phone.
This should make it work, I wish I had my phone with me. Try if you are comfortable and understand the process well. Good Luck

And if you can, could you please upload a screenshot of Setting - About Phone screen here? So that I can match that information with other versions uploaded on that link, we may find retail Indian firmware, may be...

Ok guys, good news. I had a backup of my phone before giving it to service center. N I confirm that "5.5.1-EDEM-27-SEARET_cfc.xml.zip" file given at http://sbf.droid-developers.org/edison/list.php is the Indian Retail Version everyone is looking for. I just matched the versions with my backup and this is exact same copy we need. So guys flash it without worries...

Motorola Atrix 2Atrix[Q] Need 55.1.27.MB865.AsiaRetail.en.03 India retail f
Hi dude,
The thin Is iv owned , Motorola atrix 2 AT&T cell, as i had imported it from US.. 1 month back before it launched in india, So i was wonderin if i could install indian version of gingerbread 2.3.6 on my AT&T atrix 2..
Thanks in advance

cyberwolves said:
Hi dude,
The thin Is iv owned , Motorola atrix 2 AT&T cell, as i had imported it from US.. 1 month back before it launched in india, So i was wonderin if i could install indian version of gingerbread 2.3.6 on my AT&T atrix 2..
Thanks in advance
Click to expand...
Click to collapse
I am sure you can. Hardware is same. I had Indian version and when I screwed it without taking the backup, I flashed AT&T stock ROM and it worked flawlessly so Indian ROM should work on yours too. Only difference is, Indian ROM is not restrictive like AT&T, its what non carrier branded handset should have, everything works. I would suggest try it. I don't think there will be an issue, and even if you come across any issue, you still have stock AT&T FXZ/SBF to flash... So nothing to loose in my opinion.

motorola atrix 2
raj_sh06 said:
I am sure you can. Hardware is same. I had Indian version and when I screwed it without taking the backup, I flashed AT&T stock ROM and it worked flawlessly so Indian ROM should work on yours too. Only difference is, Indian ROM is not restrictive like AT&T, its what non carrier branded handset should have, everything works. I would suggest try it. I don't think there will be an issue, and even if you come across any issue, you still have stock AT&T FXZ/SBF to flash... So nothing to loose in my opinion.
Click to expand...
Click to collapse
I would Be thank Full if Ya guid Me step by step on how to do it-
M sittin ready wit my cell ,Just waitin for the download of firmware to get complete.... thank U pls msg to my email id [email protected] m not able to msg here its showin {ALL new users are not permitted to post outside links in their messages. After approximately eight posts, you will be able to post outside links. Thanks for understanding!}

cyberwolves said:
I would Be thank Full if Ya guid Me step by step on how to do it-
M sittin ready wit my cell ,Just waitin for the download of firmware to get complete.... thank U pls msg to my email id [email protected] m not able to msg here its showin {ALL new users are not permitted to post outside links in their messages. After approximately eight posts, you will be able to post outside links. Thanks for understanding!}
Click to expand...
Click to collapse
I assume you have motorola usb drivers installed, could be found on Motorola support site easily (cant tell you the link now, at work right now).
Then just wait for firmware download to finish. Install RSD Lite and run it. Turn off your phone. Now hold Vol Up+Vol Down together and press power key, you will see 4 options, select AP Fastboot. Now connect your phone to PC using cable. Now the RSD Lite screen should show your device listed in the white blank box. After that click on "..." icon on RSD Lite and select the firmware file you downloaded. After all this, just hit the Start in RSD window and wait patiently for few minutes. Once it is done your phone will restart and boot into your new firmware. That's it... Enjoy
Do let me know if you need any further help. Right now I am planning to go home, will only be able to reply tomorrow morning hopefully.
Sorry, cant mail you right now, no access to personal email sites at work

raj_sh06 said:
I assume you have motorola usb drivers installed, could be found on Motorola support site easily (cant tell you the link now, at work right now).
Then just wait for firmware download to finish. Install RSD Lite and run it. Turn off your phone. Now hold Vol Up+Vol Down together and press power key, you will see 4 options, select AP Fastboot. Now connect your phone to PC using cable. Now the RSD Lite screen should show your device listed in the white blank box. After that click on "..." icon on RSD Lite and select the firmware file you downloaded. After all this, just hit the Start in RSD window and wait patiently for few minutes. Once it is done your phone will restart and boot into your new firmware. That's it... Enjoy
Do let me know if you need any further help. Right now I am planning to go home, will only be able to reply tomorrow morning hopefully.
Click to expand...
Click to collapse
Dude Guess Wat, i tried Doin All those N messeD up Wit my cell- fOr 3 hrs- rsd lite sucks..., it messed up my whole cell as it was stuck in the fast boot flash mod- and had to do it everythin manually in cmd,and tried uploadin india retail firmware it did not support- at last no better go had to download and install the AT&T firmware back- Now my cell is alive- ,
N thanks for the reply
n r u on Facebook ? dude send me friends request [email protected]

cyberwolves said:
Dude Guess Wat, i tried Doin All those N messeD up Wit my cell- fOr 3 hrs- rsd lite sucks..., it messed up my whole cell as it was stuck in the fast boot flash mod- and had to do it everythin manually in cmd,and tried uploadin india retail firmware it did not support- at last no better go had to download and install the AT&T firmware back- Now my cell is alive- ,
N thanks for the reply
n r u on Facebook ? dude send me friends request [email protected]
Click to expand...
Click to collapse
It didn't work? Hmmm... I don't have my phone to try anything new yet, will get a replacement next week. Anyways, in my other thread here in General Section, xda Dev "cogeary" is working on a custom ROM based on Indian Retail ROM with additional features taken from Chinese ROM, like call recording, spam SMS/Call blocking. So its just few days till we start getting real good ROM's here. So keep visiting here.
Facebook, yeah. But I don't add strangers
Just kidding, will add you, though I hardly use FB, just have it to keep in touch with old friends.

Related

"starting services" does not stop...on boot up

Hi all , just joined xda-developers but i spend straight 14 hours trying to fix this DAMM photon q yesterday
all i got in the end is a normal boot after following this http://forum.xda-developers.com/showthread.php?t=2001108
BUT at the startup , the screen comes like for a millisecond and then this " starting services" logo doesn't go at all...it just continues forever
any help would be appreciate .
Can you explain what your setup is, and exactly what you've done to get where you are?
For example, you were bootloader official unlocked, on CWM and asa-10, etc.
Thanks.
arrrghhh said:
Can you explain what your setup is, and exactly what you've done to get where you are?
For example, you were bootloader official unlocked, on CWM and asa-10, etc.
Thanks.
Click to expand...
Click to collapse
bootloader is not qaulified for official unlock... and its my friends phone so he gave to me since he was unable to use it.. i thought i could give it life again.. so...i don't what esle info you want but i did EXACTLY what that thread told me to do... and still the that thing does not go ..
tune345 said:
bootloader is not qaulified for official unlock... and its my friends phone so he gave to me since he was unable to use it.. i thought i could give it life again.. so...i don't what esle info you want but i did EXACTLY what that thread told me to do... and still the that thing does not go ..
Click to expand...
Click to collapse
Still doesn't tell me what you've done, what state the phone is actually in, etc.
I thought my question was pretty straightforward. Unless you provide more detail, I don't know how anyone will be able to help you.
Is this a stolen device? Why is it not qualified for the official unlock? Either way, how does that play into what's wrong with the device?
Did you have custom recovery on it? Give some details!!!
arrrghhh said:
Still doesn't tell me what you've done, what state the phone is actually in, etc.
I thought my question was pretty straightforward. Unless you provide more detail, I don't know how anyone will be able to help you.
Is this a stolen device? Why is it not qualified for the official unlock? Either way, how does that play into what's wrong with the device?
Did you have custom recovery on it? Give some details!!!
Click to expand...
Click to collapse
i think i am a noob at explaining things but let me try again...i don't know the exact history of this phone , my friend gave it to me yesterday and its not stolen ... he paid his insurance every month but then who know what he did... i have no idea why its not qaulified for the official unlock probably because he bought a new phone on the same line so the company deactivated this phone..
ok so when i got the phone yesterday , the bootlocker logo appeared and i was unable to do anything ...then i installed CWMrecovery and it was successfull and then i installed every possible rom available online as far as i know but same thing happened with all of them ..... successfully installed , it reboots and little square thing saying " starting services..." and then it does not go away at all ... but at the same time i am able to bring the top menu ..and go to the settings and everything from there but i can't go to home screen since ...it is black and is occupied by "starting services.."
so finally i came accross this thread for master reboot and i followed it ....i installed TWRrecovery and made backup and then restored a backup providers by that guy ... i flashed new stock recovery after that... so following his thread , he told that if all went successful ... it will return to original stock
and now i am at the same screen as previous... " starting serivces..." my friend told me he tired to root it and he messed up really bad ..so i believe there is still some old files in the internal storage from previous rom versions.... but i deleted everything......wiped, data facotry reset and then
installed a clean backup provided by the thread starter...... and everyone else had success except me ...
i hope i answered your questions if not .. i would aprreciate if you tell me what exactly you want to know ..... thanks
i also tired every US ROMS from here http://sbf.droid-developers.org/asanti_c/list.php
and all of them showed " starting services.." after i installed them from sdcard using CWMrecovery.
we have full RSD lite backups now to restore a phone can be found in this thread
http://forum.xda-developers.com/showthread.php?t=2095536 i think some xml editing is required tho but it explained it in the thread. that will erase everything on the phone and restore it to complete stock minus unlocked bootloader
Rangerbry said:
we have full RSD lite backups now to restore a phone can be found in this thread
http://forum.xda-developers.com/showthread.php?t=2095536 i think some xml editing is required tho but it explained it in the thread. that will erase everything on the phone and restore it to complete stock minus unlocked bootloader
Click to expand...
Click to collapse
i tried that but m getting confused which commands to delete and how to delete them........because its in the zip
tune345 said:
i tried that but m getting confused which commands to delete and how to delete them........because its in the zip
Click to expand...
Click to collapse
You have to extract the files and edit the xml file. And you use rsdlite on your pc phone connected thru usb to write it to the phone
Sent from my GT-N8013 using Tapatalk HD
Rangerbry said:
You have to extract the files and edit the xml file. And you use rsdlite on your pc phone connected thru usb to write it to the phone
Sent from my GT-N8013 using Tapatalk HD
Click to expand...
Click to collapse
ok i will do it right now...give me 1 minute
Woooooooooooooooooooooooooooooooo ..... DUDE YOU SAVED ME FROM GOING INSANE lol ....thanks
its working now ... i did that yesterday but my dumbass was choosing the whole zip file without extraction haha...
but the questing is which is the lastest update for it ??
If you installed the asa-14 then it should be. Make sure you flash the right one dont flash the us cellular unless thats what you have
Sent from my GT-N8013 using Tapatalk HD
Rangerbry said:
If you installed the asa-14 then it should be. Make sure you flash the right one dont flash the us cellular unless thats what you have
Sent from my GT-N8013 using Tapatalk HD
Click to expand...
Click to collapse
asanti_c-user-4.0.4-7.7.1Q-6_SPR-125_ASA-10-11-release-keys-Sprint-US.xml
i installed that one... can i make over the air update on it ... and is this like stock rom ... everything will work ..hdmi ..wifi ??
tune345 said:
asanti_c-user-4.0.4-7.7.1Q-6_SPR-125_ASA-10-11-release-keys-Sprint-US.xml
i installed that one... can i make over the air update on it ... and is this like stock rom ... everything will work ..hdmi ..wifi ??
Click to expand...
Click to collapse
You should be able to and everything should function its a complete stock just as sprint flashed it
Sent from my GT-N8013 using Tapatalk HD
is there any other way around for bootlocker ...without official ??
Thank you so much Rangerbry.........
If you Flashed CWM and TWRP your bootloader is already unlocked
Rangerbry said:
If you Flashed CWM and TWRP your bootloader is already unlocked
Click to expand...
Click to collapse
This.
Glad you got it workin with RSD lite.
Alright thank you .....all of you guys..
I meant to say remove the boot locker screen at startup ....
Another question is can i reactivate in sprint ?
tune345 said:
Alright thank you .....all of you guys..
I meant to say remove the boot locker screen at startup ....
Another question is can i reactivate in sprint ?
Click to expand...
Click to collapse
For bootlogos: http://forum.xda-developers.com/showthread.php?t=1873834
Reactivate in Sprint? What do you mean? Only Sprint can tell you whether the phone can be activated or not. Call them. Not sure why you would even worry about that if it's not stolen.....
Ok I think I will go in store and see what happens...
Ok I have this anither problem now....batteryy life is very short..I charged in the morning and after straight 3 hours.of use its out ..from 96 ,%
M looking into market ...can someone throw some light on battery calibration ...mine phone is not rooted
Sent from my XT897 using xda app-developers app

Help with my cubot a890 4g rom!

Hi everybody!
I tried to flash my cubot a890 4g with lates 8g firmware,so now is bricked.
Can Anyone to upload a backup or specific firmware for 4g rom version?
Can you provide 8Gb rom link to us?
You can try to download & flash 4Gb factory default rom here
blog.geekbuying.com/index.php/2013/04/19/cubot-a890-latest-firmware-released/
That´s the one that I tried.I thought it was 8 gb version firmware,but they told me that is for 4 gb version.
The problem is mine is 02.04.13 version and i tried to flash it with 14.03.13 version.Now is bricked.
So i need 02.04.13 version or later or even a backup ......
ctsgenl ankle
"Hornet says:
May 4, 2013 at 2:32 pm
hi javier, this update is for 4gb version. if you updated version 02.04.13 with 14.03.13 your phone could be bricked. maybe wait for an new update"
Here, take a backup of my Android 4.2.1_Cubot_M6588_20130402_CWM_bacup 4GB ROM
ZaYAC-ua said:
Here, take a backup of my Android 4.2.1_Cubot_M6588_20130402_CWM_bacup 4GB ROM
Click to expand...
Click to collapse
Sorry to interject, but ZaYAC-ua how did you load ClockWorkMod on your Cubot (M6589?) ?. At least I'm guessing you did indicated by the CWM backup part in the above filename. I've been looking for instructions but couldn't find any. I just got my Cubot M6589 today.
5waynav said:
Sorry to interject, but ZaYAC-ua how did you load ClockWorkMod on your Cubot (M6589?) ?. At least I'm guessing you did indicated by the CWM backup part in the above filename. I've been looking for instructions but couldn't find any. I just got my Cubot M6589 today.
Click to expand...
Click to collapse
See this topic under the cap spoiler.
Use translate.google.com for translation, if needed.
Thanks ZaYAC-ua. I finally got the flash tool working after a while, but unfortunately the recovery files don't seem to work properly for my phone. Now if I try to boot to recovery the screen just goes pink and then the phone reboots as normal. I'm downloading your rom backup now, but you wouldn't happen to have a copy of the stock recovery.img would you? I didn't take a backup first, because I didn't figure out how.
PAPPAFRITAS said:
That´s the one that I tried.I thought it was 8 gb version firmware,but they told me that is for 4 gb version.
The problem is mine is 02.04.13 version and i tried to flash it with 14.03.13 version.Now is bricked.
So i need 02.04.13 version or later or even a backup ......
Click to expand...
Click to collapse
PAPPAFRITAS did you magange to restore your phone???
If not the 02.04.13 firmware is online. I won't post a direct link, since I think the site is a small personal webserver, but google "A890-20130402_e2001_v89_ad1.rar" and you will find it in the last link (index of c). Password is geekbuying.com. This is someones mirror of the dropbox download which has been taken down. I have just last night unbricked my own phone with this firmware.
5waynav said:
PAPPAFRITAS did you magange to restore your phone???
If not the 02.04.13 firmware is online. I won't post a direct link, since I think the site is a small personal webserver, but google "A890-20130402_e2001_v89_ad1.rar" and you will find it in the last link (index of c). Password is geekbuying.com. This is someones mirror of the dropbox download which has been taken down. I have just last night unbricked my own phone with this firmware.
Click to expand...
Click to collapse
Everything working fine now!!!
Thanks a lot.
5waynav said:
PAPPAFRITAS did you magange to restore your phone???
If not the 02.04.13 firmware is online. I won't post a direct link, since I think the site is a small personal webserver, but google "A890-20130402_e2001_v89_ad1.rar" and you will find it in the last link (index of c). Password is geekbuying.com. This is someones mirror of the dropbox download which has been taken down. I have just last night unbricked my own phone with this firmware.
Click to expand...
Click to collapse
I guess thats my personal dedicated server you are talking about lol. I downloaded this file from geekbuying blog for keeping a copy.
muratzilla said:
I guess thats my personal dedicated server you are talking about lol. I downloaded this file from geekbuying blog for keeping a copy.
Click to expand...
Click to collapse
Ah, well then I am very grateful that you kept a copy of that rom, as the dropbox links from geekbuying have been deactivated. Your copy got me out of a real bind when I bricked my phone. Sorry that I made mention of your personal server on an open forum. I hope I haven't caused you any problems due to the extra bandwidth. PM me if you want me to pull the above posts so you don't get any more traffic.
I am glad it helped someone. No need to worry about bandwidth as i have plenty of it.
Last week Cubot published a new ROM in their Dropbox. Just go to www.cubot.net -> service and download the file for A6589/M6589 for the download location.
Quite stable and fast. I did use SP_Flash_Tool though instead of the attached flash tool. The ROM is using the Touchwiz launcher, hopefully they will update this in a future release.
fm receiver problems
i have problems with fm receiver after adding my two sim cards with the latest firmware. Do others have this problem too? the fm receiver crashes now.
5waynav said:
Thanks ZaYAC-ua. I finally got the flash tool working after a while, but unfortunately the recovery files don't seem to work properly for my phone. Now if I try to boot to recovery the screen just goes pink and then the phone reboots as normal. I'm downloading your rom backup now, but you wouldn't happen to have a copy of the stock recovery.img would you? I didn't take a backup first, because I didn't figure out how.
Click to expand...
Click to collapse
Hi,
I'm having this same problem with my CUBOT M6589 (brand new). The phone boots ok, and after some minutes the screen becomes pink and reboots. May you post how you have solved this?
I've already applied the latest "new firmware" that's on cubot's website.

LRA ☆SM-G920R6☆ Root without tripping Knox Counter

Hi. I'm finally can root my SM-G920R6. I use the KingRoot.apk the v4.80 and root the phone. But it's not full root. Them I use the SuperSuMe.exe on my PC to remove all the KingRoot app and install the official SuperSu.apk The program install it's self. And now we can install the correct binary and reboot the device and don't lose root... ohh and my Knox still 0x0... =) XD:laugh: :victory: :highfive:
Links:
●KingRoot v4.80
●SuperSuMe. for PC
Sincerely I don't know if full root or not. But for me is working. And other things I don't know is full knox disabled. The SuperSuMe block the knox in one of the process but I don't know if is disabled at all or not.
I wish this can't help all the SM-G920R6 user. And don't want to avoid the knox warranty.
The only thing you can see is every time you BootUp your phone it say Custom.
The next thing I'm going to do is make a full backup with FlashFire app because mi firmware not appear in SamMoblie. If one Dev can make something with this backup for make custom roms or something good for this devices model.
my phone info:
Android Version : 5.0.2
Baseband : G920R6WWU1AOE4
Build Number : LRX22G.G920R6WWU1AOE4
Hardware Version : G920R6.02
I'm not a good English speaker so I apologize my errors..
P.S.
Sorry I'm not a Dev. this is my first Thread and I do this for helping.
This is a little off topic for the op but I really need help right now.. I rooted with CF autoroot for G920F no problem then installed TWRP 3.0.2-1 zeroflteusc also built for G920F model and in the process of trying to find a better rom as soon as I had a custom recovery, me (being a dumba**) accidentally wiped my internal storage to do a clean flash of a rom therefore deleting the only backup I had. I've only been able to find the factory binary for this device which I flashed but it had literally nothing exept for basic testing software and a simple ui to run it. It was also stuck on Android 5.0.2 but I found a compatible rom with AllianceROM v1 with update v2 flashed for the G920F but I can't find any way to update past 5.0.2!! I've been trying to find a way to update somehow for weeks but nothing is compatible with my device and I'm stuck. Would someone that has my model running on Android 5.1.1 or 6.0/.1 please install the TWRP I mentioned before and make a backup of the system, modem, efs, and boot and post it online or send it to me it would be a lot of help.
Reasons I hate you I guess ?
You are a real piece of **** and a cancer to those with A ACTUAL SAMSUNG-SMG920V.
I don't even know why you posted this here you don't even have a SM G920R6.
Seriously you just made me give up hope once again on getting root on my SAMSUNG-SMG920 on android 6.0.1 :crying:
Sincerely yours ( Another piece of **** with this **** tastic phone that dies in 3 hours and you can do jack **** with)
P.s. It also dies in 3 hours no matter what I install on it no matter on many resource manager apps I use, it just ****ing dies.
P.s.s. Sorry for swearing so much...
hoppits said:
You are a real piece of **** and a cancer to those with A ACTUAL SAMSUNG-SMG920V.
I don't even know why you posted this here you don't even have a SM G920R6.
Seriously you just made me give up hope once again on getting root on my SAMSUNG-SMG920 on android 6.0.1 :crying:
Sincerely yours ( Another piece of **** with this **** tastic phone that dies in 3 hours and you can do jack **** with)
P.s. It also dies in 3 hours no matter what I install on it no matter on many resource manager apps I use, it just ****ing dies.
P.s.s. Sorry for swearing so much...
Click to expand...
Click to collapse
Because my device is G920R6 originally and i want it back the 920F rom is barely compatible with my device as is and i want a stable rom made for my build and also to enlighten others of how i rooted this phone and what custom recovery is working for me. Even on 5.0.2 and an unstable rom my battery lasts 6+ hours of constant use so root is working fine for me.
So much hate.
yeah i see now this model phone is the ugly duck....
But some one have the factory firmware of this model flashable with odin. Thanks a lot.
Casper1619 said:
This is a little off topic for the op but I really need help right now.. I rooted with CF autoroot for G920F no problem then installed TWRP 3.0.2-1 zeroflteusc also built for G920F model and in the process of trying to find a better rom as soon as I had a custom recovery, me (being a dumba**) accidentally wiped my internal storage to do a clean flash of a rom therefore deleting the only backup I had. I've only been able to find the factory binary for this device which I flashed but it had literally nothing exept for basic testing software and a simple ui to run it. It was also stuck on Android 5.0.2 but I found a compatible rom with AllianceROM v1 with update v2 flashed for the G920F but I can't find any way to update past 5.0.2!! I've been trying to find a way to update somehow for weeks but nothing is compatible with my device and I'm stuck. Would someone that has my model running on Android 5.1.1 or 6.0/.1 please install the TWRP I mentioned before and make a backup of the system, modem, efs, and boot and post it online or send it to me it would be a lot of help.
Click to expand...
Click to collapse
Hi. i found a factory SM-G920R6 Android 6.0.1 frimware... but this android version I'm rooted with the same cf auto root you used .
And I don't know remember were i downloaded the firmware.. But later I try to uploaded.
M3RS3 said:
Hi. i found a factory SM-G920R6 Android 6.0.1 frimware... but this android version I'm rooted with the same cf auto root you used .
And I don't know remember were i downloaded the firmware.. But later I try to uploaded.
Click to expand...
Click to collapse
Could you install the twrp recovery I mentioned and make a backup of the system and boot and post that?
Casper1619 said:
Could you install the twrp recovery I mentioned and make a backup of the system and boot and post that?
Click to expand...
Click to collapse
yeap.. but when I install the recovery the phone gave a glitch.. its flipping the touch response inverted.. and the only fix is with root. and use the app. phone info.apk for Samsung and use the secret code with root because it is blocked on the dialer.
but i have the backup for the new firmware. not the android 5.0.2
M3RS3 said:
yeap.. but when I install the recovery the phone gave a glitch.. its flipping the touch response inverted.. and the only fix is with root. and use the app. phone info.apk for Samsung and use the secret code with root because it is blocked on the dialer.
but i have the backup for the new firmware. not the android 5.0.2
Click to expand...
Click to collapse
That's exectly what I need I'm stuck on 5.0.2 and I want to upgrade back to 6.0.1 it's mainly the bootloader I need because no other marshmallow bootloaders work for this phone and the one I have is only for 5.0.2
Casper1619 said:
That's exectly what I need I'm stuck on 5.0.2 and I want to upgrade back to 6.0.1 it's mainly the bootloader I need because no other marshmallow bootloaders work for this phone and the one I have is only for 5.0.2
Click to expand...
Click to collapse
But i have the stock firmware flashable with odin. you have my same phone. SM-G920R6?
M3RS3 said:
But i have the stock firmware flashable with odin. you have my same phone. SM-G920R6?
Click to expand...
Click to collapse
Yeah if you could send it to me that would be awesome
Casper1619 said:
Yeah if you could send it to me that would be awesome
Click to expand...
Click to collapse
you can download send anywhere app in playstore and i cand send directly to you.
.....
ohhh let me check if i haved in the phone because i give my pc to one cousin to make some homework. and i dont haved right now.
M3RS3 said:
you can download send anywhere app in playstore and i cand send directly to you.
Click to expand...
Click to collapse
Alright I've got work then I'll be back
Casper1619 said:
Alright I've got it ready whenever you are
Click to expand...
Click to collapse
Give me some minute to go to my cousin house.. is near of my house to get the file and copy on my pendrive..
Casper1619
Sorry i go to uplode the two file. the BACKUP and the Stock Firmware 6.0.1 in MEGA and then i post the two links.. I promes... because the internet it come extremely slow... when i uploded the two file i posted ok...
M3RS3 said:
Sorry i go to uplode the two file. the BACKUP and the Stock Firmware 6.0.1 in MEGA and then i post the two links.. I promes... because the internet it come extremely slow... when i uploded the two file i posted ok...
Click to expand...
Click to collapse
Okay how long do you think it'll be?
Casper1619 said:
Okay how long do you think it'll be?
Click to expand...
Click to collapse
i don't know maybe for tomorrow.. have a good night.:good:
M3RS3 said:
i don't know maybe for tomorrow.. have a good night.:good:
Click to expand...
Click to collapse
Okay thanks you too

[TWRP][H990][single Sim][stock][rom]Full backup from 10B

It's a full backup of the entire rom of stock rom 10b
Not just one part is all the rom Just make a copy paste And you have afull rom
This is for all the people who are stuck without the possibility of returning to stock rom
This model is forgotten and not developed at all I put it up to try to seduce developers Make rom for this model
Another reason is to return to the community After helping me when I got stuck the brick
Sorry for the English This is not my first language
Download
AVIMPEG said:
It's a full backup of the entire rom of stock rom 10b
Not just one part is all the rom Just make a copy paste And you have afull rom
This is for all the people who are stuck without the possibility of returning to stock rom
This model is forgotten and not developed at all I put it up to try to seduce developers Make rom for this model
Another reason is to return to the community After helping me when I got stuck the brick
Sorry for the English This is not my first language
Download
Click to expand...
Click to collapse
Thank you for this upload!
Does it have a dual SIM menu like mine has?
View attachment 4319638
Do you have this message pops up on every boot?
View attachment 4319639
How long it takes to register to a network on every boot or service loss?
What kernel is there?
Thanks in advance.
mustasusi said:
Thank you for this upload!
Does it have a dual SIM menu like mine has?
View attachment 4319638
Do you have this message pops up on every boot?
View attachment 4319639
How long it takes to register to a network on every boot or service loss?
What kernel is there?
Thanks in advance.
Click to expand...
Click to collapse
Does it have a dual SIM menu like mine has?
no
Do you have this message pops up on every boot?
no
How long it takes to register to a network on every boot or service loss?
Automatic half a minute or less
What kernel is there?
stock
AVIMPEG said:
Does it have a dual SIM menu like mine has?
no
Do you have this message pops up on every boot?
no
How long it takes to register to a network on every boot or service loss?
Automatic half a minute or less
What kernel is there?
stock
Click to expand...
Click to collapse
Downloading. Will try it tomorrow.
mustasusi said:
Downloading. Will try it tomorrow.
Click to expand...
Click to collapse
and what happened
AVIMPEG said:
and what happened
Click to expand...
Click to collapse
Worked as it should. Pure stock rooted with some bloatware that can easily be deleted.
Good to have this for us H990 variant.
Thank you
This is the only ROM for this model
Know someone else?
İs it rooted ?
Hamodi said:
İs it rooted ?
Click to expand...
Click to collapse
Yes it is root
wma2wma3 said:
Thank you
This is the only ROM for this model
Know someone else?
Click to expand...
Click to collapse
no there is not
This model is dead
I'm trying to push it but I'm just one person
l;l;l;lk
AVIMPEG said:
and what happened
Click to expand...
Click to collapse
dude that samme kind of zip that i gave u of LOS its back up.........
D4rk9009 said:
dude that samme kind of zip that i gave u of LOS its back up.........
Click to expand...
Click to collapse
You did not explain how to install it
Through instal
Or through backup
Because I asked and did not really get an answer
So I went the way I understand
It was ZIP twice
I deleted everything and needed the file again
After repeated attempts without success
I tried to create some interest in the model H990
And I failed in a big way
So I decided to go with the flow and transfer to another phone
AVIMPEG said:
After repeated attempts without success
I tried to create some interest in the model H990
And I failed in a big way
So I decided to go with the flow and transfer to another phone
Click to expand...
Click to collapse
You didn't fail, I think the modding community just moved on from this device a long time ago, especially since the H990 got root almost a year after release when the V30 was beginning to be hyped up.
We can't thank you enough for trying, though. It's a shame that this phone didn't get the attention it deserved.
You saved me!
I would like to buy you a drink. You absolutely saved my phone!
I have an LG H990DS that was on firmware v10e-AME-XX.
Following emdroidles dirtysanta, I flashed firmware H990ds10d_00_OPEN_AME_DS_OP_1216.kdz. At step 17 I flashed h990-kernel.zip.
I ended up with a phone that would boot into TWRP but not into Android (It got stuck on the 2nd LG logo). I could use ADB and I could use Fastboot. I tried to use LGUP to reflash my firmware but download mode ended in a static screen. LGUP would not not recognise my model beyond H99010p. I tried the common.dll and the patched LGUP as well, I got nowhere.
Sadly I had not performed a backup first. After a lot of searching I got your backup to work. Here is how I did it:
1) Download the folder [2016-01-01--21-11-52_NRD90M] onto your microSD card.
2) Enter TWRP and perform a backup. (This creates a folder unique to your phone.)
3) Using TWRPs filemanager, copy the whole folder [2016-01-01--21-11-52_NRD90M] into /external_sd/TWRP/BACKUPS/[your phones serial number here]/
4)Using the phones back button you can return to the TWRP Restore menu. AVIMPEG's backup is then available for you to download.
I at least now have a working phone. I would still like to get LGUP to recognise my phone so that I can flash the correct firmware again. Any ideas are welcome.
AVIMPEG how can I donate via paypal to you?
AJS77 said:
I would like to buy you a drink. You absolutely saved my phone!
I have an LG H990DS that was on firmware v10e-AME-XX.
Following emdroidles dirtysanta, I flashed firmware H990ds10d_00_OPEN_AME_DS_OP_1216.kdz. At step 17 I flashed h990-kernel.zip.
I ended up with a phone that would boot into TWRP but not into Android (It got stuck on the 2nd LG logo). I could use ADB and I could use Fastboot. I tried to use LGUP to reflash my firmware but download mode ended in a static screen. LGUP would not not recognise my model beyond H99010p. I tried the common.dll and the patched LGUP as well, I got nowhere.
Sadly I had not performed a backup first. After a lot of searching I got your backup to work. Here is how I did it:
1) Download the folder [2016-01-01--21-11-52_NRD90M] onto your microSD card.
2) Enter TWRP and perform a backup. (This creates a folder unique to your phone.)
3) Using TWRPs filemanager, copy the whole folder [2016-01-01--21-11-52_NRD90M] into /external_sd/TWRP/BACKUPS/[your phones serial number here]/
4)Using the phones back button you can return to the TWRP Restore menu. AVIMPEG's backup is then available for you to download.
I at least now have a working phone. I would still like to get LGUP to recognise my phone so that I can flash the correct firmware again. Any ideas are welcome.
AVIMPEG how can I donate via paypal to you?
Click to expand...
Click to collapse
It's free
If you know a Rom developer ask him to build rom for this model
AVIMPEG said:
It's free
If you know a Rom developer ask him to build rom for this model
Click to expand...
Click to collapse
I'd like to build a rom for h990ds. What method exactly did you use? Backup system only using twrp?
What is your model? India or Phillippin ?
quanqw said:
What is your model? India or Phillippin ?
Click to expand...
Click to collapse
Infomedia
harysviewty said:
I'd like to build a rom for h990ds. What method exactly did you use? Backup system only using twrp?
Click to expand...
Click to collapse
My model is the Middle East
H990 Clean without sub-model
Sorry for the late response I'm not here much

J727R4 Stock firmware nonexistent?

Hmm, so I'm going to try and bring root to these devices but first I need current stock firmware. So the issue I've run into, and this is the first time I've come across something like this... is that there doesn't seem to be any stock fw downloads available online. There are some extremely sketchy websites that try to get you to pay for low_ship firmwares but I don't like that.
How do we get current stock downloads for our devices if nothing has been released? I need SM-J727R4 J727R4TYU1AQD4 stock firmware for Galaxy J7 US Cellular...
EDIT:
Managed to get this phone rooted and everything was working great. Flashfire may have borked my System partition when I was doing backups, don't know how. But now I'm bricked until I can get firmware. Sent an email to Samsung, we'll see what they say.
Do you if the phone it comes unlocked ? Im interested in getting one
Sorry, Im on US Cellular but Im not sure that it is. I dont even know how to find out.
By the way, the firmware thankfully has been released. You can find it at SAMMOBILE and samsung-firmware.
Hi. Please, if root will be done - will it also work on European languages? Well thank you.
What is your exact model number, is it SM-J727R4?
LeviathaninWaves said:
What is your exact model number, is it SM-J727R4?
Click to expand...
Click to collapse
J727R4 US Cellular Check ESN A
tono4224 said:
Hi. Please, if root will be done - will it also work on European languages? Well thank you.
Click to expand...
Click to collapse
tono4224 said:
J727R4 US Cellular Check ESN A
Click to expand...
Click to collapse
Root should work great for you.
Stock stock ROM J727R4TYU1AQD4_J727R4USC1AQD4_USC Precisely J727R4TYU1AQJ3_USC1AQJ3_USC_U.S_Cellular_7.0. Please, can anyone use TWRP and superSU to root? Well thank you.
tono4224 said:
Stock stock ROM J727R4TYU1AQD4_J727R4USC1AQD4_USC Precisely J727R4TYU1AQJ3_USC1AQJ3_USC_U.S_Cellular_7.0. Please, can anyone use TWRP and superSU to root? Well thank you.
Click to expand...
Click to collapse
There isn't an official TWRP release for this phone, but the SMJ727P is an exact match to the SMJ727R4 in hardware. Use the TWRP for that device, wipe your data partition to remove encryption, then without rebooting flash the Magisk 14 zip for root. SuperSU works but has some problems. You will lose all your data but this is what I did and it works well.
Now that goes without saying, if things go wrong I'm not responsible.
Please help. Everything is like me, but after the SuperSU v.2.79-SR3 is introduced and the following restart is still running: Verification failed. Well thank you.
Prize. J727R4 works on the Slovak and on the network. I want to share my experience.
1. Start uninstall without restart, all 5 items (Odin3_v3.12.10) Build number: NRD90M. J727R4TYU1AQJ3. After the restart process, we select a flashlight.
2. Release the rest without restart, insert twrp_3.0.3-1_sm-j727p_17517. After we start without restart, we select the flashlight.
3.Downloads without reboot. insert J727P-SR3-SuperSU-v2.79-SR3_rooted_boot_AQB9. after we pick the flashlight.
4. Trojhmat home, power, + set wipe-Gawlik.chase.data and select restart system in the menu. After the ratcheting and learning is the phone root and unlock.
Maybe I have to close this topic.

Categories

Resources