Related
Ok, i've had a problem with it, first i removed the protector that was as large as the device and made the screen very ugly, then i got the one from the box and putted it on, every air-bulb was gone when i kept rubbing etc.
1 stayed, under that bulb there was something white, i found out it was a 'piece' of dust.
It was kind of annoying so i removed the screen-protector, now when im trying to put it on i get lots of 'dust-bubbles',
Anyone has an idea of how to do it or should i just leave my diamond without the screen protector?
Protection
Personally i prefer to have a screenprotecter on my device. I can recommend invisible shield. its very durable and will not be scratched. check it out on www.zagg.com
If you remove the protector, then there will alway be dust next time, because the dust get stuck to the protector glue. (I have also remove mine several times)
I have tried zagg, but I can't recommend it. It is a little sticky (which they also says on their homepage) and I don't like that. The floating feeling is gone. It is also not that invisible.
I have selected to buy a new original protector, and will use that.
The trick to get it on without bobbles is to start on the long edge and then slowly add it. (Keep the 'paper' on as long a possible).
(Michael
willyy1991 said:
Ok, i've had a problem with it, first i removed the protector that was as large as the device and made the screen very ugly, then i got the one from the box and putted it on, every air-bulb was gone when i kept rubbing etc.
1 stayed, under that bulb there was something white, i found out it was a 'piece' of dust.
It was kind of annoying so i removed the screen-protector, now when im trying to put it on i get lots of 'dust-bubbles',
Anyone has an idea of how to do it or should i just leave my diamond without the screen protector?
Click to expand...
Click to collapse
The original is washable. Wash it and dry it with a paper towel that sucks in the water bubbles, wipe dry and clean your screen and reapply it.
By the way, this goes to Accessories forum.
mhfalken said:
If you remove the protector, then there will alway be dust next time, because the dust get stuck to the protector glue. (I have also remove mine several times)
I have tried zagg, but I can't recommend it. It is a little sticky (which they also says on their homepage) and I don't like that. The floating feeling is gone. It is also not that invisible.
I have selected to buy a new original protector, and will use that.
The trick to get it on without bobbles is to start on the long edge and then slowly add it. (Keep the 'paper' on as long a possible).
(Michael
Click to expand...
Click to collapse
Where can you buy a new one, i need it really fast because my phone is without protection right now and no i am affraid of pressing it to hard to leave a permanent mark..
tnyynt said:
The original is washable. Wash it and dry it with a paper towel that sucks in the water bubbles, wipe dry and clean your screen and reapply it.
By the way, this goes to Accessories forum.
Click to expand...
Click to collapse
I did this and the dust keeps coming at the protector and my phone and there will be bubles because the dust gives it a 'height-problem'..
I bought invisible shield for mine, its pretty nice after say 4 days from install.
For first 2 days it might seem really bad but it gets much better.
I somehow scratched it without even noticing it, so I sent picture to zagg and they sent me new one. Even though scratch was very minor.
mhf
hi. this my first post on this web site
excuse me for my bad english
i have a diamond and i remove orginal screen protecter because i write sms with letter recorgnizer and the area that i write words on the screen become white and scratch. i remove orginal and buy a new one that for iphone. i cut it for my phone size and apply it. its sooo much stiky and i have a problem like orginal one.i wnat to remove it and when i do it a tiny layer of glue stand on my diamond screen. i can't clean it. and it give a bad scene to my diamond.
what's your idea. i give u a pichture from my diamond screen.
Perhaps you could use isopropyl alcohol, usually it will remove glue without damaging the plastics surface (in that case: your display). DON'T USE nail polish remover, acetone or even benzine, it will remove the glue too - but your display would look "milky". You can get isopropyl alcohol at the pharmacy.
Tell us if that helped you
mhf said:
hi. this my first post on this web site
excuse me for my bad english
i have a diamond and i remove orginal screen protecter because i write sms with letter recorgnizer and the area that i write words on the screen become white and scratch. i remove orginal and buy a new one that for iphone. i cut it for my phone size and apply it. its sooo much stiky and i have a problem like orginal one.i wnat to remove it and when i do it a tiny layer of glue stand on my diamond screen. i can't clean it. and it give a bad scene to my diamond.
what's your idea. i give u a pichture from my diamond screen.
Click to expand...
Click to collapse
You might be interested in this thread: http://forum.xda-developers.com/showthread.php?t=421229
I didn't get a screen protector with mine... I mean, I had a shipment protector with a little tab for peeling off, but nothing came with it for long term use. It's a Sprint, did they just not include one?
the exim screen protector is very good and smooth
I always use the Brando screenprotectors. See their online shop. They ship worldwide for only $ 3,00 shippingcosts.
It is very easy to install, easy to clean, 100% garanteed scratch free and very durable.
iixnullxii said:
I didn't get a screen protector with mine... I mean, I had a shipment protector with a little tab for peeling off, but nothing came with it for long term use. It's a Sprint, did they just not include one?
Click to expand...
Click to collapse
I've got a Sprint Diamond too, and didn't think I got a protector either, but it was in the separate bag that has the manuals. It should have come with one...Wish it woulda come with an extra one too, oh well.
I had the same problem with misalignment and dust bubbles with the HTC protector on my first few tries...i did however fix the problem...
Take the protector off and clean off the phone...use a microfiber cloth to get all the dust and oil off...after its super clean...take the protector and wash it off with some mild soap...rub the soap in with your fingers and get it clean. Be sure to note which side is down. After its clean, hold it around the edges and let the water bead off...i blew on the protector to get residual water off...some water is ok...actually helps with the install...the basically carefully apply it still holding the sides making sure not to leave finger prints. Start from the top and work your way down... i used a credit card pushed against the microfiber cloth to squeegie the protector down...be carefull with the few drops of water. After you have it down...there might be little bubbles or what looks like water spots where water is trapped under the screen...dont worry...just use your phone and leave it alone. Once it heats up from the excessive phone use it will start to dry up and the protector will come out very nice and smooth. Mine is flawless and i did the wash with soap apply and remove at least 3 or 4 times to get it right...Just be patient
I use screen protector from martinfields, what do you say about, anyone have one??
I think the best in market
My HTC one got a nasty scratch in it last week, so I ordered a Martin Fields.
It arrived this morning and I've got it on without any problems. So far I've noticed:
- It's not a perfect fit like the HTC one was. The hole for the speaker at the top is larger than the hole in the phone. It's not bad though.
- The visibility of the screen does seem better than the HTC protector, but I don't know if it's just the placebo effect of having a more expensive protector.
- It was _easy_ to put on, no bubbles at all
- The protector for the bottom buttons is awful. The circle is just the right size to completely hinder using the touch wheel and it's obvious that you've got a piece of plastic on there.
- It seems smoother than the original HTC one when using the stylus.
So far I'm impressed with it. I didn't bother with the camera hole or bottom hard buttons. The in box HTC one was fine for me, but when I got a scratch on it (my stylus somehow developed a sharp edge), it annoyed me.
I'm using the one supplied as standard with a uk CompactIV and it's great- you can hardly tell it's thereand the sensitivity seems fine.
I have 24 diamond screen protectors. Because i bought 24 diamonds and sold them all without screen protectors so i am sorted untill i buy another phone.
After using the martin fields one for a couple of days, I think it's great.
The screen looks much brighter and clearer through it (I thought the HTC one was great, but I do notice the difference). Plus the smoothness is brilliant, theres pretty much no friction for the stylus or fingers
where can i purchase the htc screen protector? the original that comes in the box...
I used my Nexus S without a screen protector, and there was one day when I was using the phone heavily, this part of the screen felt a little rough to the touch when I was swiping it.
Now when I look at the screen I see these faint track marks on the screen that aren't scratches, but it's like something smudged the screen. I have wiped it with microfibre cloth (My Oakleys pouch) but I can't remove this smudge.
It's barely visible when the screen is on but you can see it if the screen is off.
Does anybody else have this problem? Is it a scratch or can I wash this off somehow?
I have similar spots... it's most likely the oleophobic coating wore off in that area. Not sure how it happens, but it seems to be ****ty coating.
Kayatoast said:
I used my Nexus S without a screen protector, and there was one day when I was using the phone heavily, this part of the screen felt a little rough to the touch when I was swiping it.
Now when I look at the screen I see these faint track marks on the screen that aren't scratches, but it's like something smudged the screen. I have wiped it with microfibre cloth (My Oakleys pouch) but I can't remove this smudge.
It's barely visible when the screen is on but you can see it if the screen is off.
Does anybody else have this problem? Is it a scratch or can I wash this off somehow?
Click to expand...
Click to collapse
dinan said:
I have similar spots... it's most likely the oleophobic coating wore off in that area. Not sure how it happens, but it seems to be ****ty coating.
Click to expand...
Click to collapse
I also have one such small spot that is only visible when the screen is off, and only visible at a certain angle with a lot of light. It's been there since I got the phone. It actually looks like it's under the glass, but I can't tell for sure. I can't feel it. I've been keeping an eye on it and I'll utilize Best Buy's protection plan if it gets worse. Im glad I'm not the only one, but this is a little disappointing.
It's problably the oleophobic coating like others said. I have the same thing on mine, and have been thinking of exchanging it because of it. But I think I might as well keep it, as this phone has no other problems, and I'm sure it will probably wear off any phone I get with due time.
Take a paper towel and lightly go over that area. I bet it comes clean so you can't see it anymore until you wipe your oily fingers in that spot again. It seems oils like to get stuck in those spots unless you clean it with something that absorbs oils, and isn't reused over and over.
Thanks for the replies guys. Yeah I am hesitant to do a return as my phone works great with none of the issues faced by others.
I'll try cleaning it as suggested. Thanks!
Sent from my Nexus S using Tapatalk
I had the smudges that Kayatoast talked about. I just wiped it off with a paper towel and it disappeared. I guess we must clean it with something that absorbs oil.
My smudges probably came from the hand lotion...
I've also decided not to return mine because I don't want to get a replacement phone with a worse problem.
As for wiping it off, this may work for others in some situations, but the spot on mine is definitely a blemish/defect. Cleaning it has zero effect.
I used iklear to clean the screen then wiped it down with a microfibre cloth. That took care of the smudge. Then I slapped a screen protector on it and that took care of the smudge..now to get rid of those air bubbles..lol.
I recommend this brand: http://www.protectionfilms24.com/pr...geraeteklasse=7&marke=Samsung&modell=4603&go=
Arrived in 2 days, made by 3M and doesn't affect my screen clarity at all.
I just realized the same type of smudge on mine today. It's not on top of the screen, but seems like it's under it. Like others, I didn't want to exchange it because everything else works fine plus I'm out of my 30 day period with no exchange.
If I remember, I'm probably going to do a warranty exchange before it ends.
When I was cleaning my screen to put on my cheap eBay screen protector, I noticed the same smudge in the middle of my screen. No amount of cleaning removed it completely. On went the screen protector, and "Voila", smudge disappeared .
BTW, the eBay screen protector is very close to screen feel as the naked screen and is completely clear. Free with the $3.99 shipped silicone case... gotta love eBay!!!
treodoc said:
When I was cleaning my screen to put on my cheap eBay screen protector, I noticed the same smudge in the middle of my screen. No amount of cleaning removed it completely. On went the screen protector, and "Voila", smudge disappeared .
BTW, the eBay screen protector is very close to screen feel as the naked screen and is completely clear. Free with the $3.99 shipped silicone case... gotta love eBay!!!
Click to expand...
Click to collapse
You know, I thought this was a joke until I got the cheap screen protectors that came with the S gel case. Yeah, it disappears. Weird since it looked like the smudge was under the screen.
Phew im glad im not the only one, the smudge is barely noticeable except under light and while the screen is off. Going to try to clean it.
Is the smudge you guys are talking about, blue by chance? I have a slight blue streak underneath my screen since it was purchased. To best describe it, it looks like a shiney blue streak from cleaning with windex that never dries.
Sent from my Nexus S using XDA App
OK, so today I threw my Incredible (AMOLED if it matters at all) into my backpack and some keys in there scratched it a little bit. The scratches are not too deep, and you can't feel them or anything, so I was hoping there might be a way to fix it. I looked around a little bit and saw that toothpaste can help for getting scratches out of things like CD's and such. Has anyone tried this on their phone? I don't think anything bad would happen, but I don't really know...
Also, I know that I should have bought a screen protector, so please don't remind me about that.
'Getting scratches out' sounds like a bit of a oxymoron. You don't have something IN your screen, a scratch is more like a bit of surface screen missing.
I can't see why toothpaste would harm the screen. Just don't get the phone wet, turn it off, clean up afterwards, etc.
Really can't see how it would help either...
I have never heard of using toothpaste to fix scratches, but since the scratches are not to deep I try this product that has done wonders it is called apple sauce and was originally made to fix iPod scratches. Look it up on amazon.
If this helped please press the thanks button
Yes! It works well, rub it in tiny little circles starting in the center of the screen and working your way out. BUT BE CAREFUL. don't push hard ar all, and don't do the same part more than 2 or 3 little "circles" or you may destroy the screen. if you do it right though, it should work fine.
Nilurun said:
Yes! It works well, rub it in tiny little circles starting in the center of the screen and working your way out. BUT BE CAREFUL. don't push hard ar all, and don't do the same part more than 2 or 3 little "circles" or you may destroy the screen. if you do it right though, it should work fine.
Click to expand...
Click to collapse
What do you mean "destroy the screen"? How easily can I accidentally do this? I don't want it to get worse!
They say you can do it on CD's it acts like a polish. I think it all depends on the surface of the screen and what kind of metirial it is made up of.
Good luck though!
Vaseline. lol
Yes, it will probably work since toothpaste is the same as a car polish in general
Sent out of my Free Candy Van.
Mustard works better than toothpaste. It turns into glass when you use it to remove scratches on your phones screen. If you rub it on your face every night before going to bed you'll grow a proper manly beard too. Really, there's no limit to the things you can do with mustard with it's amazing properties.*
*All of the above is patently untrue in the same way that turning lead into gold is pure fiction. Toothpaste contains mild abrasives. Would you use sandpaper on your screen?
DirkGently1 said:
Mustard works better than toothpaste. It turns into glass when you use it to remove scratches on your phones screen. If you rub it on your face every night before going to bed you'll grow a proper manly beard too. Really, there's no limit to the things you can do with mustard with it's amazing properties.*
*All of the above is patently untrue in the same way that turning lead into gold is pure fiction. Toothpaste contains mild abrasives. Would you use sandpaper on your screen?
Click to expand...
Click to collapse
Nice! I tried the mustard, and it looks like it worked! My screen looks brand new! Also, I think I can already see stubble after just one night!!! The only problem is now my pillow is stained yellow...
Anyways, I thought that the toothpaste helped because of the slight abrasiveness of it...?
There are products here in the UK made under the Duraglit brand as Brasso and Silvo. These are metal polishes, but are also available as a cotton wad roll impregnated with the stuff. I do not know if they are sold in the USA, but there may be something similar from US manufacturers. As their name suggests they are made to clean and polish brassware and silverware.
It is a very fine abrasive suspension, but it also contains ammonia to remove any tarnish, and white spirit to act as a lubricant. They are quite good at removing scratches from watch glasses etc., by gently cutting into the surface, down to the level of the scratch.
On touch screen devices, the touch screen sensitive layer lives above the screen glass, but under a plastic protective layer. It will be this top layer that you have scratched. The product above or something similar may work, but check that the white spirit does not attack the protective plastic layer.
As mentioned above small, circular movements, a little at a time may work. If you cut through the protective layer, you are in trouble.
patrick848 said:
Nice! I tried the mustard, and it looks like it worked! My screen looks brand new! Also, I think I can already see stubble after just one night!!! The only problem is now my pillow is stained yellow...
Anyways, I thought that the toothpaste helped because of the slight abrasiveness of it...?
Click to expand...
Click to collapse
Nice to see people getting into the spirit of things Anyway, i hope you find a solution that works. I personally might be tempted to ask the manufacturer to replace the digitizer, as long as the cost wasn't too prohibitive. I tried changing one myself on an old phone and it didn't work out too well
Am not sure about what kind of display cover your phone has. But, if it's capacitive or IR and the top layer is glass, take it to the local wrist-watch merchant/repair center and they could fix it for you using H2SO4 and some filler.
Alternatively, you can have the top layer of the touch panel replaced.
And, next time, do use a screen protector. =D
saintmagician said:
'Getting scratches out' sounds like a bit of a oxymoron. You don't have something IN your screen, a scratch is more like a bit of surface screen missing.
I can't see why toothpaste would harm the screen. Just don't get the phone wet, turn it off, clean up afterwards, etc.
Really can't see how it would help either...
Click to expand...
Click to collapse
I am not sure if toothpaste would help the screen scratches, its not a tooth scratch.. LMAO
Is it true that tooth paste works like sand paper on glass, does that mean that it contain something harder than glass? I don't have scratch just want to remove paint between my screen protector. Want to know if tooth paste actually micro scratch the glass.
*Note: NONE of the other threads have helped me with this, so please don't tell me to search, because I have read ALL of the threads pertaining to this, on multiple forums*
Hey guys, I recently bought a Galaxy S2 about 2 weeks ago, and everything has been working fine, until I ran into a "problem" yesterday...
The screen seems to be "sticky". I cannot smoothly slide my finger over it. I have no screen protector atm. This applies for all my fingers, both hands. The really weird part about this though is that if I were to try sliding the screen with the back part of my hand, or my knuckles, it's perfectly smooth.
I have wiped it down with a microfiber cloth multiple times (I also lightly breathed on the screen to allow for some condensation before wiping it with the microfiber).
And so that nobody makes shroud comments about my "cleanliness", my hands are perfectly clean, I have washed them multiple times thinking that for some reason they could be dirty, and I have also tried putting rubbing lotion and baby powder on my hands, to no avail.
I am a general "clean-freak", so it can't be that my fingers are dirty...
What should I do? I have absolutely no idea what to do from here!
Are you running stock or a custom rom?
I ask because it could just be the rom. Also, it may have to do with the memory on the phone.
Now it is weird that its different with the back of your hand... do you have poor circulation? Just a thought
Sent by Supersonic!
imheroldman said:
Are you running stock or a custom rom?
I ask because it could just be the rom. Also, it may have to do with the memory on the phone.
Now it is weird that its different with the back of your hand... do you have poor circulation? Just a thought
Sent by Supersonic!
Click to expand...
Click to collapse
This is a completely physical "problem". I can actually feel it with my finger when I try sliding across the screen (I feel the resistance, and the "stickiness").
My circulation is perfect fyi.
But to answer your original question, everything is pure stock.
Just rub your finger with a cloth like your trouser or jeans will solve the problem
rkkaranrk said:
Just rub your finger with a cloth like your trouser or jeans will solve the problem
Click to expand...
Click to collapse
I actually tried that. But it didn't work at all.
I am honestly extremely confused though as to why this is happening at all....
Well, I have tried using eyeglass cleaner, to no avail. I sprayed some on the microfiber, rubbed it in circular motions on the screen, then dried with another microfiber. No results. I tried that 3 times. Then, I took a Q-Tip, dipped one end into the eyeglass cleanser (pretty much the same as rubbing alcohol), then ran it in circular motions across the screen, then rubbed and dried with a microfiber - still the same. I did this 2 times.
SOMEBODY PLEASE HELP ME! (sorry about the caps lock, I'm really confused and mad...)
Hey I have a solution that works for me for your exact problem. However, if your a clean freak this may or might not rest well with you. But whenever I find my screen gets to "sticky" for swype or any games etc that require a lot of swiping motions. I actually just use the natural oils on my face by either rubbing my forehead or nose really quickly with my pointer finger then rubbing my phone screen, preferably to a screen with a screen protector. My face isn't excessively oily or anything but the face has natural oils on it. Even when you wash it frequently. If you ever over do it the oils are pretty easy to just wipe off as well. It's a very quick and easy and natural solution whenever your screen is hard to swipe. Hope this helps.
Am all natural, organic, sustainable solution... Hippie! Lol
Sent from my PC36100 using xda premium
I can't remember whether it (the SGS2) has one or not, but it sounds very similar to what happened when the oleophobic (fingerprint-resistant) coating rubbed off an old iPhone of mine. Resistance went through the roof, smudges very apparent etc.
Easiest solution is to just give it a solid clean with either denatured alcohol or a window cleaning solution (to get rid of the oils and greases - a cloth and saliva won't do) and whack a screen protector on over the top.
I find cheap eBay protectors are less resistant than some of the premium brands (Looking at you, Zagg - ugh), so a couple of bucks should fix this for you.
So my idea worked and i now have a full adhesive screen protector. Covers from edge to edge and there is no halo effect. The protector is on good and does not peel/pop out. I am using a unicorn beetle pro full body case and no problems. Before the case would pop out the protector but not anymore.
What exactly was your idea?
How did you manage this? (For the people that haven't been keeping up with your posts, such as myself.)
Did you use LOCA or OCA film?
Sent from my Galaxy Note7 using Tapatalk
so much detail. so much wow. i wish there was more information, like, what you used, how you did it, instead of a brag post. thanks for the pictures though!
One of his older posts discussed using LOCA. If you use LOCA, how do you get it off if you ever want to remove the screen protector?
Yes I used LOCA glue. To take it off you just heat it. It should be easier to remove than when replacing the digitizer.
I got a couple air bubbles though but id rather have that than a scratched up screen lol
Interesting.... but more info on how to do it and what products to use would be great. Thanks OP.
I was just thinking about if this was a solution two days ago, but this is exciting news that its worked. My question is, is the LOCA a problem to handle, because i could see using too much might have some go into the speakers or just seep from the borders. when originally applied. and is there a way to make sure we don't get bubbles?
teegunn said:
Interesting.... but more info on how to do it and what products to use would be great. Thanks OP.
Click to expand...
Click to collapse
Donnyohs said:
I was just thinking about if this was a solution two days ago, but this is exciting news that its worked. My question is, is the LOCA a problem to handle, because i could see using too much might have some go into the speakers or just seep from the borders. when originally applied. and is there a way to make sure we don't get bubbles?
Click to expand...
Click to collapse
Yea i got a little on the speaker but you just have to be care full and as it seeps kut clean it with a rag. The good thing is that it wont dry until you put the black light on it. The part you have to be the most carefull with is the home button. Loca will make it sticky and a little harder to press. I also reccoment you get a protector that is completely clear as the one i got has black on the top and bottom and it prevents the black light from drying the glue under those areas. Clean the screen good. To avoid bubbles look at youtube and see how they apply it. Basically a stick figure but instead of a head it is a y shape. Carefully place the protector and let is slowly spread on its own. Once it stoos spreading then you could slowly press down on it and remove the remaining bubbles. I lined uo thw home and back buttons first and made sure the cut outs were aligned for the camera and sesors. Then i applied the black light on the bottom half furst so that it would align properly. I did this while pressing down on it because the air bubbles kept coming up. I also covered up the top half so that wouldnt dry up. Oncw i got the bottom i got rid of any air bubbles on the top half and did the same. After that i put the phone in a box., close it up, do a cut out for the black light to fit and let it sit for a couple minutes to dry more. Then i cleaned and dried the edges. Make sure not to leave too much of the loca in between the screen and protector so you wont get touch senaitivity issues. And do it where there is no dust. I oly got 1 small air bubble but some like white spots that appear to be dust. And again clean the speaker, home button, sensors, and camera before drying. You could also just scrape it off with a plastic blade that the loca came with. And make sure to use liquid version and not the film.