CyanogenMod is a free, community built distribution of Android 2.3.7 (Gingerbread) which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
cyanogen said:
This is an AOSP-based build with extra contributions from many people which you can use without any type of Google applications. I found a link from some other project that can be used to restore the Google parts, which can be found below or elsewhere in the thread. I've still included the various hardware-specific code, which seems to be slowly being open-sourced anyway.
Click to expand...
Click to collapse
Visit the CHANGELOG for a full list of changes and features!
All source code is available at the CyanogenMod Github!
If you'd like to to contribute to CyanogenMod, checkout our Gerrit instance (howto).
INSTRUCTIONS:
- First time flashing CM 7 to your Desire (or coming from another ROM)?
1. Root your device and install Clockwork Recovery (Unrevoked method is recommended).
2. Do a Nandroid backup!
3. WIPE (wipe data/factor reset + wipe cache partition)
5. Install the ROM
6. Optionally install the Google Addon
HOW TO REPORT BUGS OR PROBLEMS?
- Was it a hard reboot? Go into recovery and dump the "/proc/last_kmsg" file.
- Was it a soft reboot or a "boot loop"? Run "adb logcat" and get send the full output.
- Pastebin links preferred
- Please use the issue tracker whenever possible!
Please visit the CyanogenMod Wiki for step-by-step installation walkthroughs and tons of other useful information.
This is the latest release candidate so any and all feedback is appreciated!
The preferred method of installation is via ROM Manager, or you can head over to the CM Forums for manual downloads.
Latest version: 7.2.0-bravo - 18/03/2012
Download: CyanogenMod Mirror Network
Also available for download via ROM Manager
Google Addon:
Download: http://goo-inside.me/google-apps/
CM7 HBOOT r2 by Alpharev | xda thread
Change partition table size 145/5/287 (system/cache/size)
Upgrade instruction:
1) Nandroid backup in recovery.
2) Verify the MD5SUM of the file you downloaded against the one in the table.
3) Flash HBOOT with your phone in fastboot mode (Back+POWER) -> 'fastboot flash hboot bravo_alphaspl-cm7r2.img'
4) 'fastboot reboot-bootloader'
5) 'fastboot erase cache'
6) Boot recovery, wipe everything, advanced restore system & data, install CM7 again (same version or a newer one).
Legacy App2SD:
Simple2Ext (Easy with a GUI)
CM7 Legacy App2SD Addon Script (For Advanced user, Command Line)
Thank you to EVERYONE involved in helping with testing, coding, debugging and documenting! Enjoy!
reserved for future use
Thank you!
Cant wait to see first CM9 Nightlies (yes i know it will be difficult to do because of HTC and QCOM but i still have hope)
Gr8!I'm downloading now,i know it takes too much to have such another rc version,thank you devs!
Sent from my HTC Desire using XDA
Download is very very slowly... :-(
Inviato dal mio HTC Desire usando Tapatalk
Quit complaining about the downloadspeed. Do you have any idea how many of us are probably downloading this rom right now?
via xda app
i try all rom,not all but many,and today is my first cyanogenmod
thanks
Jordywild said:
Download is very very slowly... :-(
Click to expand...
Click to collapse
http://www.cyanogenmod.com/blog
7.2RC1 is out for "only" 70 devices
Its probably placebo but this release candidate seems a lot smoother than the last nightlies. So issues so far. :thumbup:
via xda app
Im having problems installing market applications like:
SMS backup and restore
Call logs backup and restore
and other applications
Just in case you have successfully installed one of the following please post it. Maybe its my installer or something.
Thanks!
SMS backup and restore is fine. I just had my messages restored. Same with the other apps. I would suggest a clean install if you are having trouble.
via xda app
Thanks for everyones hard work on this. If upgrading from 7.1 can someone confirm if I need to do a wipe?
Thanks,
Womble
Update from CM 7.1.0 work? Because i get bootloop...
19blacktiger77 said:
Update from CM 7.1.0 work? Because i get bootloop...
Click to expand...
Click to collapse
Have you got EXT4 partition?
Is Cyano 7.2 compatible with EXT4 o EXT3 partition?
Jordywild said:
Have you got EXT4 partition?
Is Cyano 7.2 compatible with EXT4 o EXT3 partition?
Click to expand...
Click to collapse
I'm running 7.2.0RC1 with an ext3 partition. I have S2E installed for app2sd. I didn't upgrade from 7.1 though, I did a full wipe when I installed 7.2.0RC1.
frankoid said:
I'm running 7.2.0RC1 with an ext3 partition. I have S2E installed for app2sd. I didn't upgrade from 7.1 though, I did a full wipe when I installed 7.2.0RC1.
Click to expand...
Click to collapse
Full wipe?
I've got "only" 90 app installed.
Ok: I need a backup with Titanium.
You need to modify mountsd on the initd folder prior to flashing if you want the rom to see your ext4 partition... or flash ManU kernel.
http://forum.xda-developers.com/showpost.php?p=23017080&postcount=6689
via xda app
GPS does not works with this version... back to 7.1
Home button does not work... buggy...
Back to 7.1!
Jordywild said:
Have you got EXT4 partition?
Click to expand...
Click to collapse
Yes!
stankyou said:
You need to modify mountsd on the initd folder prior to flashing if you want the rom to see your ext4 partition... or flash ManU kernel.
http://forum.xda-developers.com/showpost.php?p=23017080&postcount=6689
via xda app
Click to expand...
Click to collapse
carval2k said:
GPS does not works with this version... back to 7.1
Click to expand...
Click to collapse
I will stay on 7.1 too...
Related
CyanogenMod is a free, community built distribution of Android 2.2 (Froyo) which greatly extends the capabilities of your phone.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
cyanogen said:
This is an AOSP-based build with extra contributions from many people which you can use without any type of Google applications. I found a link from some other project that can be used to restore the Google parts, which can be found below or elsewhere in the thread. I've still included the various hardware-specific code, which seems to be slowly being open-sourced anyway.
Click to expand...
Click to collapse
Visit the CHANGELOG for a full list of changes and features!
All source code is available at the CyanogenMod Github!
If you'd like to to contribute to CyanogenMod, checkout our Gerrit instance (howto).
INSTRUCTIONS:
- First time flashing CM 6 to your Desire (or coming from another ROM)?
1. Root your device and install Clockwork Recovery (Unrevoked method is recommended).
2. Do a Nandroid backup!
3. Update your radio! New radio from 2.2 roms is required, see downloads below.
4. WIPE (wipe data/factory reset + wipe cache partition)
5. Install the ROM
5. Optionally install the Google Addon
- Upgrading from earlier CM6?
1. Do a Nandroid Backup!
2. Install the ROM (your Google apps will be backed up automatically)
HOW TO REPORT BUGS OR PROBLEMS?
- Was it a hard reboot? Go into recovery and dump the "/proc/last_kmsg" file.
- Was it a soft reboot or a "boot loop"? Run "adb logcat" and get send the full output.
- Pastebin links preferred
- Please use the issue tracker whenever possible!
Please visit the CyanogenMod Wiki for step-by-step installation walkthroughs and tons of other useful information.
This is the latest release candidate so any and all feedback is appreciated!
The preferred method of installation is via ROM Manager, or you can head over to the CM Forums for manual downloads.
GSM
Latest version: 6.1.1-Desire - 16/12/2010
Download: update-cm-6.1.1-Desire-signed.zip
Also available for download via ROM Manager
MD5Sum: e14b66d1e24f34603e2aaf071f20c5e2
CDMA
Latest version: 6.1.1-BravoC - 12/16/2010
Download: update-cm-6.1.1-BravoC-signed.zip
Also available for download via ROM Manager
MD5Sum: 5bd096950c505742e9e84fb6dc1da5e3
Google Addon: HDPI-20101114
Download: http://goo-inside.me/google-apps/
Thank you to EVERYONE involved in helping with testing, coding, debugging and documenting! Enjoy!
Rooting Guide
http://forum.xda-developers.com/showthread.php?t=788044
Google Addon: latest HDPI-20101114
Other release http://goo-inside.me/google-apps/
Radio Firmware: 5.x radio required (GSM ONLY)
Desire GSM radio thread
Read/Write Access System Partition (S-OFF)? (GSM ONLY)
Thank's to AlphaRev [site] [xda]
Low storage for apps? (GSM ONLY)
Flash the AlphaRev HBOOT Bravo N1Table (Require S-OFF)
Follow this instrunction for update without data lost (aka no data wipe)
Still low storage for apps?
Install an A2SD solution: Firerat or Darktremor
i recommend the Firerat solution: CM specific, less space usage 25kb vs 6mb, bind mount, no boot loop, auto restore after cm rom update (from 1.35b)
No audio on FM Radio? (GSM ONLY)
http://forum.xda-developers.com/showpost.php?p=8992389&postcount=1280
Change Provider Name? (CDMA ONLY)
http://forum.cyanogenmod.com/topic/9101-guide-change-provider-name-in-cm6/
Adfree symlink instruction
can you post screes??
Woot, downloading now!!!
WAHEYYYYYYYYY! I'll flash asap. Do we have old school a2sd yet?
Sent from my HTC Desire using XDA App
GANJDROID said:
WAHEYYYYYYYYY! I'll flash asap. Do we have old school a2sd yet?
Sent from my HTC Desire using XDA App
Click to expand...
Click to collapse
No. Old school A2SD is aimed for CM 6.1. Just be happy with the ROM as it is atm. It's great. It's phenomenonal, marvellous, beautiful... amazing... [SteveJobsMode=off]
oleeeeeeee...thanks cyanogenmod team...
is the cyonegen mod soo good? or way are all so happy??
i flash it ... ext3 needed?
yasars said:
is the cyonegen mod soo good? or way are all so happy??
i flash it ... ext3 needed?
Click to expand...
Click to collapse
Besides JesusFreke, cyanogen is the godfather of Android.
CM exists since the G1/HTC Magic. After cyanogen got his Nexus, the project started to grow big. Atm it's (officially) available for 8 devices with many other unofficial ports for other devices.
No ext partition on the SD card is needed, it uses the Froyo A2SD implementation.
great man!!!!!
I just felt a little bit afraid...
I flashed all the things as you said ( Radio, wipe, CM, Gapps) then reboot...
I was stuck on a little Android robot just close to a white box and a yellow arrow going out the bof and going towards the robot..
Remove my battery 2 times than nothing...
Now, I wait a little bit more, then some stranges things happened ( going to HTC logo, reboot, the box and the android, reboot) and now, I have the boot animation...
All seem correct, but I was so afraid
profete162 said:
I was stuck on a little Android robot just close to a white box and a yellow arrow going out the bof and going towards the robot..
Remove my battery 2 times than nothing...
Click to expand...
Click to collapse
When you see that the radio is being flashed, it's a VERY bad idea to pull the battery at that point!
Ok, I didn't know that!
So I feel lucky, everything is fine!
Thank for the information, I won't do that again!
just flashing with a2sd.
Fingers crossed it still works
update: It works with a2sd!!
I hope it dont cause problems as that a2sd method was for the nightlys.
Has the bootimage been changed since the last nightly?
Screens please
Sent from my HTC Desire using XDA App
Restored nearly 30 apps and space is 102Mb to 69Mb. This is normal? İ checked apps and all of them on SD card.
Sent from my Desire using XDA App
Static IP with DHCP router
Hi
I still have problem with connecting wifi to a DHCP router. I tried Wifi Static to set statis ip which worked fine on the other rom, but i have never been able to use it in CM Rom
Besides, I have two APN on my 3 Network, but I can only choose 1 of them hence I cannot swap to the other one.
I'm looking for helps from everyone
Thank you.
I don't understand why you people want screenshots... it's stock Froyo in appearance, other than some blues swapped for cyans.
Can't wait to flash this. Kudos to the CyanogenMod team for all their hard work.
Is wifi sleep issue fixed?
Is vpn issue fixed?
Is that definitely the correct md5 of the Radio image?
I get:
Code:
e75698d9341820818dc7f345f48717cf
Consistently, downloaded both on-device using wget and on my PC using Chrome and wget.
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.1 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
WARNING: I've bricked my tablet into APX mode around the 10th time of flashing this ROM (recovery froze and it rebooted into APX). The new (Update 1) recovery should be safer than the old one, but flash at your own risk!
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Device-specific source code for the Acer A700 are available from https://github.com/CyanogenMod/android_device_acer_a700 and https://github.com/CyanogenMod/android_kernel_acer_t30
Do not submit bug on CyanogenMod issue tracker
Downloads
Latest Nightly: http://get.cm/?device=a700
Google Apps: http://goo.im/gapps
Installation
Install CWM recovery from http://forum.xda-developers.com/showthread.php?t=1791165 (note that the old touch version will not work because of incorrect default.prop from CWM builder)
Do a Nandroid Backup!
Install the ROM using ClockworkMod Recovery
Optionally install the Google Addon
Wipe data if coming from stock
Changelog
A rough changelog is (will be) available here:
http://changelog.bbqdroid.org/#/cm10/a700 or http://cm10log.appspot.com/?device=a700
Reporting Bugs
You are allowed to report bugs only in this thread.
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow.
Code:
What is your--
Phone model:
Radio (baseband):
CM version:
CM Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance settings (other than stock):
other modifications:
Provide any additional information (observations/frequency of problem/last version it worked on/etc) as needed:
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Older pre-nightly Download
See this post.
Note to Official JB Users
Jelly Bean bootloader is only supported on 201212023-EXEPRIMENTAL and later NIGHTLIES.
Awesome!
will flash it later when back from work and provide feedback (too annoyed with the stock rom atm) so i will give it a go!
cheers
Awesome! Pace is speeding up. Thanks for your efforts.
pawitp said:
...
[*]Install CWM recovery from http://www.mediafire.com/?9usi98fs7jpdf7w (the touch version in the other thread will not work because of incorrect default.prop from CWM builder)
...
Click to expand...
Click to collapse
The CWM is not the one from the "CWM Recovery 6.0.1.0 for A700" thread, right?
Cheers
Peter
aticatac said:
Awesome! Pace is speeding up. Thanks for your efforts.
The CWM is not the one from the "CWM Recovery 6.0.1.0 for A700" thread, right?
Cheers
Peter
Click to expand...
Click to collapse
No, read inside the brackets
The "CWM Recovery 6.0.1.0 for A700" has broken build prop and will cause the device check to fail.
pawitp said:
No, read inside the brackets
The "CWM Recovery 6.0.1.0 for A700" has broken build prop and will cause the device check to fail.
Click to expand...
Click to collapse
Actually, I did read inside the brackets, but the CWM in the mentioned thread is not a touch version, or so I thought, that's why I asked.
EDIT: Now I realised that we were talking about the exact same thread title.
Anyways, I will flash this one, give it a whirl and read twice or more next time.
Jeez, where is my mind...
Thanks again.
Does the CM10 include the performance update?
does anyone else get e:Can't mount /sdcard/ ?
cwm tells me can't mount sdcard and emmc but data, cache and system mount fine (backup even stores on the sdcard under cwm folder)
Can you give us the MD5 CWM recovery ? Thx
ups forgot the most important screen
just redid it same error
PS:
(used your recovery.img as stated above)
Buster99 said:
ups forgot the most important screen
just redid it same error
PS:
(used your recovery.img as stated above)
Click to expand...
Click to collapse
dou you have an external sd card?
looking forward for cm on the a511. have fun with your a700
Sent from my A511 using XDA Premium HD app
What size should do the Nandroid Backup ? Mine do 15Mo !
Blindie said:
dou you have an external sd card?
Click to expand...
Click to collapse
yes but took it out prior flashing the recovery.img so atm no - no 2nd sdcard
Does it wipe the internal storage ?
imtheyoyo said:
What size should do the Nandroid Backup ? Mine do 15Mo !
Click to expand...
Click to collapse
mine is 165mb
aibo said:
Does it wipe the internal storage ?
Click to expand...
Click to collapse
should not since after successfull install you wipe cahce and dalvik not sd
i just reflashed the recovery - still no joy
Very nice ! Tanks a lot !
But no sound for me ...
Have you got sound ?
enico64 said:
Very nice ! Tanks a lot !
But no sound for me ...
Have you got sound ?
Click to expand...
Click to collapse
I have sound.
So far so good, thank you.
I do enjoy the lack of bloat.....
aibo said:
Does it wipe the internal storage ?
Click to expand...
Click to collapse
The installer doesn't, but you'll need to wipe data for it to boot successfully. Wiping data won't wipe your internal sdcard though.
I'm getting the triangle of death after flashing the recovery in the OP...
I had the other CWM you posted in the other thread which the tablet seemed to boot into just fine.
i'm running a a700 with the a701 rom from way back, is that my issue?
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.1 (JB), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
IMPORTANT!
Click to expand...
Click to collapse
* PLEASE READ THE ENTIRE TOPIC BEFORE FLASHING THE ROM.
Bug Reports
Click to expand...
Click to collapse
* REPORT BUGS IN THE TOPIC ONLY.
* DON'T SEND ME PM MESSAGES ABOUT BUGS OR FEATURE REQUESTS.
* ONLY REPORT THE BUGS IN CM10. I DON'T PROVIDE SUPPORT FOR OTHER ROMS. POST IN THEIR RESPECTIVE THREADS.
* IF YOU ARE ON A CUSTOM KERNEL, FIRST CHECK WITH THE STOCK KERNEL AND THEN REPORT THE BUG.
Downloads
Click to expand...
Click to collapse
ROM Downloads
Google Apps - Download from ROM Manager or from Here
Changelog
Click to expand...
Click to collapse
Alpha 4 - 12022012 - WIPE!
Upgrade to MTD partitioning. No more BML!
Uses YAFFS filesystem for Onenand.
Fixed Front Facing Camera Capture
OMX Encoders and Decoders are compiled from Source.
Fix Orientation issues with Front Camera in third party applications.
Front Camera Image rotation 90 degrees to match orientation.
Front Camera Stretch Preview Fixed.
Fixed several memory leaks in Camera HAL.
IMPORTANT! READ BEFORE FLASHING THIS RELEASE!
1. This ROM will wipe data due to different partitioning. The device would reboot while flashing and resume again.
2. Once on this ROM, the most effective way of going back to any other ROM would be to repartition from Odin.
3. While converting the filesystem, your efs that has your IMEI is backed up to /emmc/backup/efs. Keep a backup on your PC just in case.
4. Incase if you don't get a network signal, check if your IMEI and Baseband are proper. If not, go back to stock and try again.
5. Do NOT use Odin to flash Modems. Due to different partitions, Odin will screw up your existing MTD setup.
Alpha 3 - 10132012
Updated base to 4.1.2
Improvements to 720P Video Playback.
Fixed crash after recording video.
Fixed duplicates in Media Storage (Wipe Recommended).
Changes from upstream.
Alpha 2 - 09232012
Fixes for CM10
Fixed Bluetooth.
Fixes from CM9
HWComposer Hacks for increased performance.
Fixed Battery Drain (Reverted Samsung Sync Fix).
Camera opens much faster.
Autofocus fixes for Camera Timer mode.
Changes and Fixes from Upstream.
Alpha 1 - 03092012
Initial Release
Installation Instructions
Click to expand...
Click to collapse
This ROM is divided into 2 parts and some of the applications are installed on the /data partition due to lack of space for full Jellybean installation.
Hence you will have to reflash the rom after you factory reset or wipe /data partition.
Stock ROM
1. Flash CWM Compatible Kernel (CF ROOT)
2. Reboot to Recovery.
3. Wipe Data / Factory Reset.
4. Select the ROM zip from your SD Card and flash.
5. Go to Advanced -> Reboot Recovery.
6. Mounts and Storage -> Format dbdata
7. Flash Google Apps.
8. Reboot
Any other AOSP ROM (CM7/MIUI/CM9)
1. Reboot to Recovery.
3. Wipe Data / Factory Reset.
4. Select the ROM zip from your SD Card and flash.
5. Go to Advanced -> Reboot Recovery.
6. Mounts and Storage -> Format dbdata
7. Flash Google Apps.
8. Reboot
Upgrading from previous versions of CM10
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
Sources
Click to expand...
Click to collapse
https://github.com/teamhacksung
https://github.com/dhiru1602
All Credits to
Click to expand...
Click to collapse
codeworkx
Teamhacksung
waleedq
Adi_Pat
Known Issues
Click to expand...
Click to collapse
1. WIFI doesn't work perfectly. Network strength doesn't show up and the network often disconnects.
2. There is LAG in the UI due to lack of Hardware Composer.
3. Video recording and playback suffers low framerate issues. Will be fixed soon.
4. Built-in WiFi hotspot doesn't work. Please use third party applications.
WOOWW! Thank you dhiru!!! going to download!!
yeaaaah dhiruuuuuu!!!YOU ARE THE B E S T!!!!thx you very much
Thanks dhiru...waiting for download link~
Interesting! Looking forward to this rom.
Thanks, good luck in development
Sent from my GT-I9003 using xda app-developers app
Bluetooth is unstable even if you use Bluetooth file transfer?
oooh my god
wait patiently link
thank you dhiru
finally it is here..!!
Can't wait to try it now..!!
Sent from my GT-I9003 using xda premium
Upgrading from previous versions of CM9
1. Reboot to Recovery.
2. Select the ROM zip from your SD Card and flash.
3. Flash Google Apps.
4. Reboot
Click to expand...
Click to collapse
so if i am on CM9 A12, i don't need to do a data wipe?
thank you dhiru!
the speed is extremely slow...
BTW~! Thx Dhiru~!!!
did you fix the problems about the partition? does project butter work propely?
Finally JB for SL. Awesome stuff! Thanks a ton for this.
Sent from my GT-I9003
OMG
Is this really happening to our device.
Extraordinory....!
Sent from my GT-I9003 using xda premium
How to flash from aokp?
Sent from my GT-I9003 using xda app-developers app
A few questions ... Does Project Butter and google now work?
dhiru1602 said:
* ONLY REPORT THE BUGS IN CM9.
Click to expand...
Click to collapse
Anyways AN AWESOME WORK!!!! Btw i think there is a mistake in the op it has to be report the bugs in cm10.
dhiru1602 said:
Bluetooth doesn't turn on at times and maybe drains battery too.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1864547
just read this....is this implemented in CM 10 ???
Thanks to dhiru an the Team of cm for the work
Sent from my GT-I9003 using xda app-developers app
Gondya bhau said:
http://forum.xda-developers.com/showthread.php?t=1864547
just read this....is this implemented in CM 10 ???
Click to expand...
Click to collapse
Would that Work on CM10 as OP mentions "ics" roms?
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.1 (Jelly Bean), which is designed to increase performance and reliability over stock Android for your device.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Downloads
Latest Version:
U8160/80 11052013
U8150
U8120/10/00
Google Apps:
11052013
Installation
- First time flashing CM10 to your Huawei U81xx Device (or coming from another ROM)?
Root Your Device and install ClockWorkMod Recovery/Amon_RA Recovery
Reboot into recovery using Volume-Up + Power
Do a Nandroid Backup! (Opional)
WIPE ALL (wipe data/factory reset + format /system + format /sd-ext)
Install the ROM from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery
Install Patches from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery (if present in thread)
Optionally install Google Apps
- Upgrading from CM7/CM9/CM10?
Do a Nandroid Backup! (Optional)
WIPE ALL (wipe data/factory reset + format /system + format /sd-ext)
Install the ROM from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery
Install Patches from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery (if present in thread)
Optionally install Google Apps
- Upgrading from another CM10 Build?
Do a Nandroid Backup! (Optional)
Wipe Cache and Dalvik-Cache
Install the ROM from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery
Install Patches from Sd-Card using ClockWorkMod Recovery/Amon_RA Recovery (if present in thread)
Optionally install Google Apps
Note: Is always Recommended to do WIPE, or you can have problems (not always).
Alberto96's Mods
Tweaked to the max
99% LDPI Resized
OTA Updater Included
MX Player Included for Video Playback
Notes app Included (essential app that in CM10 is not included)
Modded QuickPic instead of Froyo Limited Gallery
Reporting Bugs
You are allowed to report bugs only at the u81xxcm10 bug tracker. Before reporting a bug, please make sure you are running as stock as possible. This means no custom kernel, no custom framework modification, etc. If you are using any of the above modifications, please flash the rom again to get rid of the modifications before reporting.
REPORT BUGS IN THIS THREAD ONLY
Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
If it is a random reboot, grab /proc/last_kmsg. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. The following is a useful format to follow.
Code:
What is your--
Model:
ROM version:
ROM Download url:
Gapps version:
Did you--
wipe:
restore with titanium backup or other backup app:
reboot after having the issue:
Are you using--
a task killer:
a non-stock kernel:
CMSettings/Performance settings (other than stock):
Attach a Logcat of the issue in plain text.
What steps will reproduce the problem?
1.
2.
3.
Failure to fill out the above template or attach a log will result in this
issue being closed immediately
Changelog
Changelog is available here
Recoveries (tested and working for all devices, U8160_80 are my builds)
For RZ Recovery Features see here
Source (to be completed)
People who made this possible:
Alberto96
LeoDeos (Alberto96's Recognized Themer )
psyke83 (Thanks for Kernel, Binaries, Source, Time Spent and much more)
tilal6991 and aorth for U8150 Stuff and much more (sorry for delay)
slymobi and joilaroi for U8120/10/00 Stuff and much more (sorry for delay)
AC1953 (Thanks for fantastic audio drivers, ideas and much more)
CyanogenMod Team
Others
The CyanogenMod team would like to thank everyone involved in helping with testing, coding, debugging & documenting! Enjoy!
Reserved
Thanks Alberto
Really you will made a version also for ideos u8150?
Too laggy on my U8160.
Sent from my U8160 using xda premium
I know its laggy (copybit is still disabled). But its stable and all works as CM9 (except speed xD)
Giogts said:
Really you will made a version also for ideos u8150?
Click to expand...
Click to collapse
Yes
S2E script is working??
Sent from my U8180 using xda premium
Ehm, dont know. I dont tried it, maybe is working
24122012 version have a bug, third boot causes bootloop, im uploading patch to apply (via cwm) Sorry to all CM10 Users
UPDATE: Patch is up !
when is perfect be on huwei u8110?
Never will be perfect on U8120/10/00 but tester is giving me all logs. Only on U8160/80 and U8150 can work all.
U8150 CM10 is up!
want more speed to U8160
Without copybit is impossible
U8120/10/00 CM10 in upload!!!
Bugs for U8120/10/00:
-Wifi not working
-Tethering (fix wip)
-Volume keys and touch mouse not working
U8120/10/00 is using U8150 kernel as no sources and no kernel is out for U8120/10/00 CM10. This makes wifi and some keys not working.
UPDATE: ROM Uploaded
8110
screen needs calibration at sim lock screen ı hit 7 it key in 4 if ı hit soft menu button its open app drawler
What is the ThirdBootPatch (Only for U8160/80)
please can you put in first page all bug of u8150 version?
Bugs are here!!!!!!!!!!!!!!!!!!!!!!!! In u81xxcm91 bug tracker !!!! Read thread please Link is specified in first post, and also here: http://code.google.com/p/u81xxcm10/issues/list
paslanmaz said:
screen needs calibration at sim lock screen ı hit 7 it key in 4 if ı hit soft menu button its open app drawler
Click to expand...
Click to collapse
Unfortunately with U8150 Kernel we can't calibrate screen, sorry.
polac said:
What is the ThirdBootPatch (Only for U8160/80)
Click to expand...
Click to collapse
The name means all Third Boot Patch. Without it phone will bootloop at third boot (U8160/80)
Alberto96 said:
U8150 CM10 is up!
Click to expand...
Click to collapse
cant boot on 8150:/
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Click to expand...
Click to collapse
General:
These are UNOFFICIAL CM13.0 Marshmellow Nightlies brought to you by Open Desire Project and TeamCodefire as a continuum to CM 11.0, CM 12.0 and CM 12.1 builds. Builds are generated automatically on Mon/Wed/Fri/Sun. Process starts around 00:30 PST/PDT. If it fails, then there will be no build until the reason for failure is taken care of which can take time. Last 7 nightlies will be kept on the server. If you want a longer history of them, you are free to archive them yourself.
Thanks and credits:
Andromadus
CodeAuroraForum
CyanogenMod
BananaGranola
Epic Beard Men
eXistZ
Flemmard
Flinny
goo.im
Juansheng
paulb_nl
randomblame
synergye
Mustaavalkosta
TeamCodefire (for build server and hosting, priceless)
All the rest that have helped to construct these builds and develop software for ace directly or indirectly in the past.
Githubs:
CyanogenMod
Open Desire Project
Changelogs:
CM Gerrit
CM Google+
Github (see above)
Installation instructions:
Download Nightlies
Download gapps from here
Put the files on SD card
Reboot to recovery
Do factory reset (ie. format /system, /data, /cache, /sd-ext and /sdcard/.android_secure)
Flash cm-13.0-YYYYMMDD-UNOFFICIAL-saga.zip
Flash gapps zip
Remember to flash boot.img via fastboot if you have S-ON
Reboot and enjoy
Update instructions:
Download Nightlies
Put the file on SD card
Reboot to recovery
Flash cm-13.0-YYYYMMDD-UNOFFICIAL-saga.zip
Remember to reflash boot.img via fastboot if you have S-ON
No need to flash gapps as CM backuptool script should take care of them (results may vary depending on which gapps package you are using)
Reboot and enjoy
Kernel
Source: github
Compiler: stock AOSP gcc-4.8
Branch: cm-13.0
Kernel Version: 3.0.101
defconfig: saga_defconfig
Contact:
My Google+
#opendesireproject @ freenode
Donations:
For build server & hosting: codefi.re (use the donation button)
Do not donate to me, but if you insist on donating, I suggest you donate that money to Mustaavalkosta or EFF instead here: https://supporters.eff.org/donate
FAQ:
Q: I tried to flash the ROM and got this:
Code:
Installing update...
set_metadata_recursive: some changes failed
E:Error in /sdcard/..path od ROM.zip
(Status 7)
Installation aborted.
Or I'm having other recovery issues.
A: Download and install the latest recovery here.
Q: I've used HTC Dev unlock and flashed the rom but it won't boot. What should I do?
A: You need to extract boot.img from the zip and flash it via fastboot. If you don't have fastboot executable anymore from flashing recovery, install Android SDK platform tools (Linux users should find it from distro's package management) and then reboot to bootloader, open command prompt and navigate to the location you extracted your boot.img and type:
Code:
fastboot flash boot boot.img
You need to repeat this everytime you flash new version of this rom to ensure everything will work fluently as long as you have just basic HTC Dev unlock.
Q: Where are my developer and performance options?
A: http://goo.gl/jpS8r
Q: Feature X doesn't work, let's make 1000 posts about it to annoy everyone.
A: Please, dont. Use search and then use search again and only then report your problem with necessary logs. [Logcat guide, thanks to MusikMonk for the link]
Q: Hey, my old phone is running the latest Android version, i want to thank someone!
A: Press thanks button here
Q: I hate you for not fixing this issue X!!!
A: I love you too.
Q: How I can build CM13.0 myself?
A: Setup a basic Android build environment.
Code:
mkdir cm13.0
cd cm13.0/
repo init -u git://github.com/CyanogenMod/android.git -b cm-13.0
mkdir -p .repo/local_manifests
wget https://github.com/OpenDesireProject/android/raw/cm-13.0/local_manifest.xml -O .repo/local_manifests/local_manifest.xml
repo sync
. build/envsetup.sh
lunch cm_saga-userdebug
mka bacon
Once the build finishes you'll find your goods from out/target/product/saga/ directory.
Q: My problem is not listed here.
A: Ask the guy/gal next to you.
XDA:DevDB Information
[ROM][UNOFFICIAL] CyanogenMod 13.0 Nightlies OpenDesireProject, ROM for the HTC Desire S
Contributors
kylon, Mustaavalkosta, paulb_nl, PhantomShadow
Source Code: https://github.com/OpenDesireProject
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Twrp 2.8.7.0
Based On: CyanogenMod
Version Information
Status: Testing
Created 2015-12-04
Last Updated 2017-01-04
Bugs (Device specific):
Glitches here and there
Headset Mic in call
SAGAOPT SETUP INSTRUCTIONS (see also Mustaavalkosta dhd post)
Disclaimer: You will lose everything on your sdcard if you follow these instructions so take appropriate steps to secure your data before continuing. Also this will be a "clean flash" from the start due to different partition layout.
Prerequisites:
TWRP for sagaopt by @jrior001
saga cm13 zip
Gapps and addons if you want them. IIRC, there was around 400-500MB space left on new /system partition after flashing base gapps package so there's a bit more room for addons.
If you have already partitioned your sdcard you may want to repartition it to have only single partition because you won't benefit from having separate sd-ext partition with this variant build. I won't write anything about this as I expect you can reverse what you have done yourself.
Installation instructions:
Flash TWRP in fastboot or your current TWRP (Install > Images > etc.)
Reboot to recovery even if you are already in TWRP. You need to reboot to be in newly flashed sagaopt TWRP.
Wipe cache and system under Advanced wipe.
Convert your sdcard to either EXT4 or F2FS under Advanced wipe by choosing data partition > Repair or Change File System > Change File System > EXT4 or F2FS.
(Optional) If you had your old /data partition formatted as F2FS you also need to convert it to EXT4 meaning converting system partition in the sagaopt recovery.
At this point your sdcard is completely empty so you will need to move the ROM zip and any additional zips into sdcard or use adb sideload.
Install cm-13-XXXXXXXX-UNOFFICIAL-sagaopt.zip and gapps.
Reboot
kylon said:
Bugs (Device specific):
Glitches here and there
Headset Mic in call
Click to expand...
Click to collapse
Thank you very much Kylon for putting up the thread for CM-13. I have already tried 20151203 and 20151204 nightlies with no CM Account and facing problem on flashing either Open GApps or Delta GApps for MM, it is showing Setting Wizard has stop mainly and some time Google play service has stop and System does not response all the time making setting up impossible. Anyway no problem on ROM flashing. Thanks.
It s a known problem on cm13.
You have to delete setup wizard
kylon said:
It s a known problem on cm13.
You have to delete setup wizard
Click to expand...
Click to collapse
Thanks for your prompt reply. I shall do that.
<Reserve>
aakashasaj said:
<Reserve>
Click to expand...
Click to collapse
Hi Kylon,
I am wondering if the keyboard and google play service stop could be solved on CM-13 sagaopt. Thank you very much.
yea, the official cm-13 is still in testing, every fc will be fixed when cm is more stable
f2fs test
kylon said:
yea, the official cm-13 is still in testing, every fc will be fixed when cm is more stable
f2fs test
Click to expand...
Click to collapse
Thanks. I will try the kernel.
kchaisu said:
Thanks. I will try the kernel.
Click to expand...
Click to collapse
It caused boot loop at the HTC logo. Thanks for your kind contribution. I have noticed that system partition is always formatted to ext4 no matter how you have changed to f2fs and finally it will be formatted back to ext4. Thanks.
Can you take a log?
kylon said:
Can you take a log?
Click to expand...
Click to collapse
I do not know how to take a log when it did not boot up. Please tell me. Thanks.
kylon said:
Can you take a log?
Click to expand...
Click to collapse
I flashed your kernel and everything is all right! Any bootloop I didn't get. Work well, don't see any difference.:highfive:
kchaisu said:
I do not know how to take a log when it did not boot up. Please tell me. Thanks.
Click to expand...
Click to collapse
Mmh, can you try with a clean install?
Maybe something went wrong on your phone.
Thats ok, this will not turn saga in a quad-core phone but it should be a better f2fs version, maybe faster and more stable
kylon said:
Mmh, can you try with a clean install?
Maybe something went wrong on your phone.
Thats ok, this will not turn saga in a quad-core phone but it should be a better f2fs version, maybe faster and more stable
Click to expand...
Click to collapse
I made a clean install, factory reset and all wiped except internal memory and SD-Ext and also change file system to f2fs. It did not boot up with black screen. So, if you and Lapyyy have no problem with the kernel, it should be my device problem or set up. However, I have tried with every nighlies and Open Gapps and Delta Gapps and have faced the same problems. Now I shall try with difference SDcard with different format. Thanks for your kind contribution.
I don t have a saga xD
Cannot test.
You should be able to take a log with android monitor and a boot.img with secure=0
kylon said:
I don t have a saga xD
Cannot test.
You should be able to take a log with android monitor and a boot.img with secure=0
Click to expand...
Click to collapse
Thanks for your prompt reply. We will see how the problem could be solved. Now I reformatted the Data partition to EXT4 and all the stuff was gone. I have to copy all necessary files to the SDcard again and will try your kernel. By the way replaceing AnySolfKeyboard by F-Droid eliminated FC on keyboard issue and making Google Account setup possible. Thanks.
Amazingly mature
I'm running 2015-12-06 since yesterday evening, and I'm amazed how mature it already is. It seems quick stable and "slick."
One thing I've noticed is that the camera API doesn't seem to be implemented/functioning yet. This is probably the reason why no camera app is included, right?
As hinted by @kchaisu (thanks!) I've installed an alternative keyboard app (Google's kbd), and now it's running really well.
The old Facebook problem (that often the device reboots when installing the app) can still be observed, but maybe it's just that our Saga has too little RAM.
Thanks, @kylon and @Mustaavalkosta, and all others who contribute to this, for breathing new life into our little Sagas...
ralfbergs said:
One thing I've noticed is that the camera API doesn't seem to be implemented/functioning yet. This is probably the reason why no camera app is included, right?
Click to expand...
Click to collapse
Well, nothing is removed per se but system hides the camera icon etc. if it can't find appropriate camera hardware which it currently can't find because camera libs won't load due to missing symbols.
ralfbergs said:
I'm running 2015-12-06 since yesterday evening, and I'm amazed how mature it already is. It seems quick stable and "slick."
One thing I've noticed is that the camera API doesn't seem to be implemented/functioning yet. This is probably the reason why no camera app is included, right?
As hinted by @kchaisu (thanks!) I've installed an alternative keyboard app (Google's kbd), and now it's running really well.
The old Facebook problem (that often the device reboots when installing the app) can still be observed, but maybe it's just that our Saga has too little RAM.
Thanks, @kylon and @Mustaavalkosta, and all others who contribute to this, for breathing new life into our little Sagas...
Click to expand...
Click to collapse
Actually, I got the idea from HD CM-13 forum which was post by @marek287. Thanks to him.
Thanks to Mustaavalkosta and Kylon for the CM-13-20151211-sagaopt nightly. This bulid is fast booting up for GApps. However, SetupWizard and AOSP Keyboard still remains FC. Thank you very much.