Related
Hello Guys at xda
i am a beginner at Roms and need your help
I was browsing forums here and just found this one... http://forum.xda-developers.com/showthread.php?t=2103783&page=15
(Its MIUI Jellybean HTC Explorer BUILD #3 aka MIUI v4.1 3.1.11 Build 3)
I read the whole forum to gain knowledge abut the rom,many questions were cleared but there are still so plz anyone help me
Firstly, i am just moving from my rooted stock to this one ...but a question stucked in my mind, am i missing something like some kernel things??
do i need some change in my phone before flashing this ? ( question came as it is based on Ngoralph's MiniCM10 which needs nAa-jb kernel and i don't know what that is.
Secondly about a lock screen bug, do i need to disable that on my very first boot ? as it doesn't work.
Please answer me ASAP :good:
The kernel is included in the Rom...
I'm the same ROM u can change to some other MIUI lockscreen.
Hi guys,
This is my first post in xda...
I recently updated my p6200 to android 4.1.2 using odin and then rooted it. Now i want a custom rom (preferably cm10 or 10.1) so i have been searching for threads like this http://forum.xda-developers.com/showthread.php?t=1842090
But, the doenload link doesnt see to work..!!!
I know this is kinda stupid but after 3 days of searching for a single link this is my only option so a sincere request to the mods to please not delete this thread..
Also i have noval launcher as my stock and i deleted touchwiz launcher. Now i dont think that matters but just in case ( im a noob to android hacking )
theXerminator said:
Hi guys,
This is my first post in xda...
I recently updated my p6200 to android 4.1.2 using odin and then rooted it. Now i want a custom rom (preferably cm10 or 10.1) so i have been searching for threads like this http://forum.xda-developers.com/showthread.php?t=1842090
But, the doenload link doesnt see to work..!!!
I know this is kinda stupid but after 3 days of searching for a single link this is my only option so a sincere request to the mods to please not delete this thread..
Also i have noval launcher as my stock and i deleted touchwiz launcher. Now i dont think that matters but just in case ( im a noob to android hacking )
Click to expand...
Click to collapse
What are you trying to achieve? The stock based ROMs are much more stable than the CM ROMs. There's no need or use to delete things and if you delete too much you will start to cause problems.
DigitalMD said:
What are you trying to achieve? The stock based ROMs are much more stable than the CM ROMs. There's no need or use to delete things and if you delete too much you will start to cause problems.
Click to expand...
Click to collapse
I'm not trying to ACHIEVE anything.!!!! :angel:
I just want a custom ROM coz I don't like touchwiz and that is exactly the reason for me deleting touchwizhome.apk
Anyways I just added that info coz I thought that would affect the process of flashing custom Roms....
Can u pls find me a working link for cm10 or 10.1 or aokp which has been ported to p6200. I really want a custom ROM
Pls help
theXerminator said:
I'm not trying to ACHIEVE anything.!!!! :angel:
I just want a custom ROM coz I don't like touchwiz and that is exactly the reason for me deleting touchwizhome.apk
Anyways I just added that info coz I thought that would affect the process of flashing custom Roms....
Can u pls find me a working link for cm10 or 10.1 or aokp which has been ported to p6200. I really want a custom ROM
Pls help
Click to expand...
Click to collapse
I am not aware of any fully functional CM based or other custom ROMs for the P62xx series. The is a CM11 ROM that is a work in progress on the forum. I would install the latest stock 4.1.2 , root and then install a third party launcher , lock screen and other items to make it look the way I want. That will get you a stable, basically custom ROM. I think its unlikely that a stable CM11 will ever appear unless Samsung releases a stock 4.4 from which to build on and CM 10 is now outdated with no developers to support it.
Have you tried the development section.. There are alot of custom roms there.. PAC, Omni to name a few..
Try the Omni4.4.2 it is still in development but it works great and having KitKat on this Tablets is awesome
Guys pardon for my ignorance(im new to this upgrading/flashing thing) but how do you install custom roms?
I'm considering it an option because after i flashed my p6200 with the new jellybean rom via odin, my tablet works until it got battery drained and now stuck on "boot-loop", I've done the CWM wipe/reset data thing but still stuck in that loading screen, I also did try reflashing it with the same jelly bean firmware but still stuck.. I'm thinking installing a custom rom might make it work again..
or if you do have the old honeycomb stock rom for P6200 DXKL2 firmware that i could use via odin.
Try this
[GT-P6200] Official ICS 4.0.4 firmware (Nov 2012) [STOCK/UNROOTED]
or
[Official FIRMWARES] Galaxy Tab Plus P6200/P6210/SGH-T869]
or
[ROM][Stock] P6200XXLB1 [16.02.2012][Android 3.2]
or
Samsung Updates Latest Firmware - LIVE!
flash via Odin
kwakman said:
Try this
[GT-P6200] Official ICS 4.0.4 firmware (Nov 2012) [STOCK/UNROOTED]
or
[Official FIRMWARES] Galaxy Tab Plus P6200/P6210/SGH-T869]
or
[ROM][Stock] P6200XXLB1 [16.02.2012][Android 3.2]
or
Samsung Updates Latest Firmware - LIVE!
flash via Odin
Click to expand...
Click to collapse
Thanks man! but all links provided here are from "hotfile" which is now closed.. also for some weird reason I cant seem to download from Samobile.. any other suggestions guys?
try this man
http://forum.xda-developers.com/showthread.php?t=2410800
it looks like a fantastic rom based on its features . i also saw good feedbacks from other user's using it
i am currently downloading it right now so i cant give a feedback for now
give it a try
EzreaL. said:
try this man
http://forum.xda-developers.com/showthread.php?t=2410800
it looks like a fantastic rom based on its features . i also saw good feedbacks from other user's using it
i am currently downloading it right now so i cant give a feedback for now
give it a try
Click to expand...
Click to collapse
does it work for you?
I've downloaded this man.. copied it to my sdcard and then installed it through CWM recovery, now I get to the part where I had to choose stuff, like pre-installment settings like whether to choose "wipe user data" and such, and then install "samsung exclusive?" or "default install" or "remove bloatware", so there after choosing my options it then goes to this page with texts and the android robot at the background, it was so fast that I didn't even get to read what is written, i remember only "wipe?" or sort of, it goes for like a second and then restart back to the
"samsung galaxy tab 7.0 plus" loading screen, it's already been a while and it's still stuck in there, I wonder if that is normal, or again like any other stock rom i've flashed with using (odin method) this is stuck and going nowhere?
help! i wanted to post this at the development thread of this certain rom, but Im not allowed due to having few posts i guess?
and by the way, could someone share a ".pit" file for the p6200, i think it might be helpful for making this tab work again, thanks!
Aeolian1916 said:
does it work for you?
I've downloaded this man.. copied it to my sdcard and then installed it through CWM recovery, now I get to the part where I had to choose stuff, like pre-installment settings like whether to choose "wipe user data" and such, and then install "samsung exclusive?" or "default install" or "remove bloatware", so there after choosing my options it then goes to this page with texts and the android robot at the background, it was so fast that I didn't even get to read what is written, i remember only "wipe?" or sort of, it goes for like a second and then restart back to the
"samsung galaxy tab 7.0 plus" loading screen, it's already been a while and it's still stuck in there, I wonder if that is normal, or again like any other stock rom i've flashed with using (odin method) this is stuck and going nowhere?
help! i wanted to post this at the development thread of this certain rom, but Im not allowed due to having few posts i guess?
and by the way, could someone share a ".pit" file for the p6200, i think it might be helpful for making this tab work again, thanks!
Click to expand...
Click to collapse
sadly man we have same experienced on it. i am also stucked on the samsung logo.
finding a new rom again
EzreaL. said:
sadly man we have same experienced on it. i am also stucked on the samsung logo.
finding a new rom again
Click to expand...
Click to collapse
oh I see, let me know man if you could find something that might work, it's already been 2 weeks since I soft bricked this device..
Aeolian1916 said:
Thanks man! but all links provided here are from "hotfile" which is now closed.. also for some weird reason I cant seem to download from Samobile.. any other suggestions guys?
Click to expand...
Click to collapse
I can send to my dropbox any file If u want.
[Q&A] [ROM][4.0.4][GT-S7562] KyleOPEN ROM v3.4.0 FIXED (for Galaxy S Duos) 26 July U
Q&A for [ROM][4.0.4][GT-S7562] KyleOPEN ROM v3.4.0 FIXED (for Galaxy S Duos) 26 July Update
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [ROM][4.0.4][GT-S7562] KyleOPEN ROM v3.4.0 FIXED (for Galaxy S Duos) 26 July Update. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
Have problem with supersu on KYLEOPEN ROM
hi cheatman,
i have flash my phone with kyleopen rom recently. i was installing the superuser app from the play store , it was installed properly in the device but supersu could'nt install in the system. It showed that it installation had failed. I reflashed the rom but no luck. please help..
AND, when i using my phone for sometime, after couple of mins, the gets rebooted and it doesn't shows the correct battery stat for some reason.... i didn't install any addons or kernels or themes in the device after flashing too.
PLEASE HELPPPP :crying::crying::crying:
MY DEVICE IS GT:7562 SAMSUNG GALAXY S DOUS
Factory reset a rooted KyleOpen rom Samsung S652
Hi All,
I have a perfectly working rooted Samsung Galaxy S Duos S7652 which is currently running KyleOpen ROM v.3.4.0.
I wanted to know what would happen if I go to Settings -> Backup and reset and do a Factory data reset on this device? The reason being my wife is going to be using this phone in the future and I want to remove all my data and settings before I set up her Gmail account and settings on the phone. I do not want to uninstall KyleOpen ROM while doing this.
Please advice.
Regards,
Harsh
About kernels
the kernels which r provided are in the zip file format and odin do not accept .zip file in pda so how to flash the kernel i am talking about kyleopen rom kernels for samsung galaxy s duos
harshv_iitk said:
Hi All,
I have a perfectly working rooted Samsung Galaxy S Duos S7652 which is currently running KyleOpen ROM v.3.4.0.
I wanted to know what would happen if I go to Settings -> Backup and reset and do a Factory data reset on this device? The reason being my wife is going to be using this phone in the future and I want to remove all my data and settings before I set up her Gmail account and settings on the phone. I do not want to uninstall KyleOpen ROM while doing this.
Please advice.
Regards,
Harsh
Click to expand...
Click to collapse
You will get no problem go for it
Thank you for this rom
it's working
it's working without signal problems on xxbmj1
Rom
actually i m running on a xperia custom rom on my galaxy s duos and there is Some Problem for which i cant connect my cell to my laptop via usb.
can i flash your Rom via Recovery mode and install from Sd card?
Link please!!!!
Can u give me the downloadable link for "S7562XXBMD6_S7562OXXBME1_S7562XXBMD4_HOME.tar.md5" ? except the google drive one
Notificacions
Why i dont recived any notificacions? In facebook and email? I tell in the item...in the item of the facebook normally apear 1 or 2 (number of mensages) and in this rom dont apear nothing only in the notificacion bar up right biside the clock on the left...why?
Hello,
First of all, as this is my first post I would like to say hi to everyone!
I'm not pro, when it comes to the phones, but i'm from IT sector so, rooting process was easy for me. Anyway I've had GT-S7562 Duos for some time and it became so slow, that I had to put new rom in it. Since there is no new version of android I've picked KyleOPEN rom and boy i was right.
Phone is running smooth, everything is in its place, actual ROM have some things removed. I am really satisfied. All credits go to developer
Only thing I haven't been able to change is wallpaper on lock screen. It does not function, nor can some application change it (wallpaper changer for example). And yea, I really missed music player, but I've downloaded one...
Nice work!
p.s. is anyone developing some new version of android for this phone?
Choosing is tough
The rom is Awesome in performance, This Phon's battery is not good enough to handle it wisely.
It kills to choose between battery and performance.
Inactive download link
Please fix the download link for kyleopen rom.
Currently,it shows"Sorry, the file you have requested does not exist."
i cant download the links that u post
can't Download file
hello sir, i cant download file :link download is broken
please upload again
Thank You very much
Dead ROM Link
Hi,
The link to Kyle Open ROM is dead. Can anyone please reupload it?
help
i have TWRP recovery so can i just install kyle open rom without needing CWM?
Firmare S7562LGSMH
Help me, I need a ROM for Galaxy s Duos with firmare S7562LGSMH Brazil
So, the links have been dead for almost 3 months now, is that right?! Come on, guys! Help out the users that are stuck with this phone hehehe!!!
I'm trying to install a faster ROM debloated on my sister's phone... Came here hoping to find it but both links are dead!!
Hello,
I have never installed any ROMs on my Android phone, since I lost my old one I got a new one the S2 Plus. My question is can anyone help me install a stable kitkat? I understand that I have to root the device, don't I?
Also anyone mind explaining what all the CMW's and Cyanogenmods are?
Cheers,
Q&A for [KERNEL][SPR][TW-AOSP 4.4][11/27/2014] KT-SGS5 - NI2 - KTweaker
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [KERNEL][SPR][TW-AOSP 4.4][11/27/2014] KT-SGS5 - NI2 - KTweaker. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
can i use this asop 5.0 kernel on G900P_NKD.5.0.Odexed.Test.zip?
hello. newbie here. first of all thank you for your cool kernels. I was wondering i can use your kernel 5.0 asop on this new rom G900P_NKD.5.0.Odexed.Test.zip or not? thnaks
eevanskiteboards said:
hello. newbie here. first of all thank you for your cool kernels. I was wondering i can use your kernel 5.0 asop on this new rom G900P_NKD.5.0.Odexed.Test.zip or not? thnaks
Click to expand...
Click to collapse
No don't do it. Aosp kernels are for aosp based roms. Nkd is stock based, you will have to wait for a tw version of KT
Wondering if there is a way to get themes for this new twrp 2.8.2.0 version?
Love this Kernel!
ktoonsez, what Lollipop do you personally use or prefer for your S5?
(that I could use your Kernel with).
lollipop 5.0 touch wiz
Do u know when u will be able to build a kernel that will work on the sprint s5 touch wiz 5.0?
i can confirm that the kernel is working on touchwhiz and fusion rom 5.0 (sprint) with no boot problems or f.c's. etc.. thanks for the kernel
AOSP Lollipop 5.0 VERSION.
I assume your new kernel (above), will work on "[STOCK ROM][5.0] NKD Android L Odexed" ?
That rom is NKD based, your kernel is NL9 based.
I don't see a NL9 firmware we can flash onto our G900P.
Well I flashed:
Touchwiz Lollipop 5.0 VERSION: 01.03.2015
and now I can not connect to the camera with any camera app.
I apply the nightly builds of CM12 every day.
Do I need to re-install this kernel?
What ROM(s) are TouchWiz lollipop that will work on my kltespr? I see new kernels for TW 5.0, but what can I run this on?
Out of curiosity. How do scripts work. Why aren't there any in the shop?
Sent from my SM-G900P using XDA Free mobile app
Hey guys,
How do I flash the 09/01 kernel with CM12 20/01?
I've been running CM12 already but having the Bluetooth issues. I've downloaded KT-SGS5-LP5.0-AOSP-G900-01.09.2015.zip but when I go to flash it from recovery it says zip signature verification failed. Do I have to untick the verification?
Thanks.
hello,
just installed the newest kernel 2-11, thank you. I noticed one problem that I think is kernel related, but not to sure. when i open my camera app, it shows blue lines in the photo. i did not have this problem earlier today when I used the camera, weird. any opinion? i am currently running fusion 5.0 on OA6 with
thanks
Anyone have any issues with Private Mode not working after running KTweaker kernel
Dumb question can this run on MOAR 6.1 ?
philiptibbs said:
Dumb question can this run on MOAR 6.1 ?
Click to expand...
Click to collapse
Check out the MOAR FAQ. Yes, you can. You even had the option to install it when you flashed MOAR 6.1.
I just updated to version 9, dated 2/26. However, I'm unable to get any signals..... I had to go back to version dated 2/25.
Any ideas?
Problem with 2-26-2015 kernel - Modem stopped working (Sprint)
On the 2-26-2015 kernel, my phone modem would not connect to Sprint. This also prevented WIFI calling to work as well.
I had to revert back to the 2-25-2015 kernel.
When I flashed 2-26, I wiped dalvik/cache afterwards.
Anyone able to reproduce this?
I flashed 2/26/2015 and the phone was not getting any signal. It said that it kept telling me to insert a sim every time I tried to do something that needed the network. I also went back to 2/25/2015