Database Info

New too custom time on sensation. Bit of help please

Right 1st off I have been looking into this for a few weeks now and have searched but I just want to be sure before I do actually do anything and potentially damage my phone. Also I did used to flash custom rims on my desire so I'm not completely new to this but am by no means a pro at it.
I have s-off using revolutionary but that's as far as I've gone and I didn't install custom recovery due to wanting to install the official ics update which is what I'm running now.
1st question is are there any preferred recoveries? I know on my desire there were a few to choose from which could affect being able to install certain Roms and also are there any issues using recovery now that I've update to ics?
2nd how would I go about flashing it? I read about downloading it to root of sd and flashing from stock recovery.
3rd I've seen that I apparently don't need root as a custom Rom comes pre rooted?
4th will the whole flashin a Rom proceedure be the same as what I'm used to e.g. boot into recovery backup current rom, wipe when needs then flash Rom and reboot. Also I've read about a super wipe what is this?
I think ill he ok with all this but I love this phone and don't want to cause any damage to it.
Any help would be appreciated. Thankyou
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium

1. CWM or 4ext. Many prefer 4ext for the touch interface and additional options. You can download an updater for this from market, it will install it for you.
2. CWM Recovery can be flashed via the boot loader, it's exactly like updating the boot loader on your desire. You will also use this method to update your firmware - this is different to desire, it updates various parts including radio.
3&4 yes the same!
sent from HTC Pyramid using Tapatalk

I would suggest 4EXT touch for recovery over ClockworkMod. There has been numerous reported cases in XDA threads with ROM installation issues using CWM. I myself have had issues with CWM and only recently changed to 4EXT recovery.
As for superwipe, have a look at this link.
http://code.google.com/p/superwipe/
Sent from my Sensation XE using XDA

XdividerX said:
I would suggest 4EXT touch for recovery over ClockworkMod. There has been numerous reported cases in XDA threads with ROM installation issues using CWM. I myself have had issues with CWM and only recently changed to 4EXT recovery.
As for superwipe, have a look at this link.
http://code.google.com/p/superwipe/
Sent from my Sensation XE using XDA
Click to expand...
Click to collapse
+1

Thank for all your help guys. Ok so looks like ext4 is the way to go but how do I go about installing it? I am not not rooted yet only have s-off.
Sent from my HTC Sensation XE with Beats Audio Z715e using xda premium

You cannot root if you don't install a custom recovery first.
You can download 4EXT recovery in PG58IMG from Here
Rename it only PG58IMG and put on the root of your sd card.
Reboot to bootloader (volume down + power button), at prompt if you want to update, say yes by pushing volume up.
let do its things and when finished push power button to reboot.
Delete PG58IMG from sd card when done (or each time you reboot bootloader it will ask to update).
Once installed, flash this zip from 4EXT recovery.
Then download from the market superuser and busybox to get root.
Hope it helps. Hit thanks if it did

thanks again for your help. just follwed as you said but when i go into bootloader it checks for file then say model id incorrect press power to reboot?

stewalker said:
thanks again for your help. just follwed as you said but when i go into bootloader it checks for file then say model id incorrect press power to reboot?
Click to expand...
Click to collapse
What is your model id?
you can dowload terminal emulator from market and give this command "getprop ro.mid" (without quotes). This will give your model id. Inside the PG58IMG that you downloaded ther is android-info file and there you can change the mid accordingly.

think i might of sorted it. model i.d. walk pg5813001.
just wainting on it rebooting now, delete the file then boot recovery check its worked. make a backup and flash the su file. hopefully.
yup all sorted ext4 on there now (what a great recovery)
sounds really stupid but how do you thank users on here? sorted it i wasnt signed in

ROM installation

Hi guys..I tried to install neww ROM in my AT&T SG2 just rooted and not complete with a message "signature verification failed" installation is aborted..other message in the screen mention "can't access to:/system/csc/att/system/....can someone exlain me, what is going wrong??? thank a lot

Need an aftermarket recovery image IE...clockworkmod
GeNexus
AOKP
Francos latest
-VabeachFC-

turn off the signature verification in recovery. may be that zip file is not signed.
Sent from my Nexus One using Tapatalk

Have you ever install custom kernel with CwMR integrated yet?
If not, do so b4 flashing custom ROM

Thanks for your response. I am a rookie in this mather. I tried with a ROM MANAGER but the app, I feel only handling CWR ROM's???.
It's ask about permissions a I applied. Later I open the recovery (up/down volume, power & home bottons), but I didn't see any different options than wipe,s update boot and locate room from the sd. My Zip handler in free fkrom the market.
I am still confuse with the message.
regards
Sent from my SAMSUNG-SGH-I777 using XDA

no ROM MANAGER has almost all available roms for ur device.
so i guess you should be using clockworkmod recovery.
while in recovery choose install zip from sd card. and in there ull find toggle signature verfication.
Sent from my Nexus One using Tapatalk

Ahh ok
I just check it in my phone. ROM Mger include a CWN recovery inside. its has both options to install Roms , isn't is??? CWMR I can not find as a separate app.
Sorry for all the disturbs.
Sent from my SAMSUNG-SGH-I777 using XDA

CWM recovery is not an app as like ROM MANAGER. its recovery.
and you can use rom manager to flash cwm recovery. and with recovery u can flash new rom,backup the current rom and more
Sent from my Nexus One using Tapatalk

Hi friend...time with no contact..jaja. I need a new help from you. I read in others forums that the problem with the AT&T SG2 to install other ROMS or Kernel is based in the 3rd edition of the Recovery System which not permit to open zip files without verification of the signature.
They recomend to downgrade to a second edition trough a personalize kernel and install with ODIN. This kernel has to locate in XDA forum as a zip file like CF-Root-XXX bla-bla...to install later. I checked and is confused due to a several options. that the point of the help I need from you.
My phone OS is coming with Gb 2.3.4
Baseband version I777UCKH7
KERNEL version 2.6.35.7
Build number UCKH7
Could you please directed me which version of the CF-Root.... have to download????
Thanks a lot again
Sent from my SAMSUNG-SGH-I777 using XDA

help with recovery please.

flashed clockworkmod recovery v5.0.2.0 (BB) running stock rom android v2.2.1 via rom manager, rebooting to recovery says E: bad boot message "recovery" what does it mean
Sent from my HTC Desire S using Tapatalk 2

That happens to most people, it doesn't mean anything. The recovery will still work fine, I've been getting that ever since I've had this phone and it's never caused me any problems. Don't worry about it.

it seems that for me the recovery options are not working as i try to choose any option and its just stuck on with the recovery logo, i press power again and it back yo menu, is there any fastboot i need to disable ? because i cant get to bootloader... menu + vol up...
Sent from my HTC Desire S using Tapatalk 2

Try using other button to select, instead of power button. For me, I use search button, but my recovery is a different version than yours. If you give up, flash a different recovery file.

post-mortem said:
Try using other button to select, instead of power button. For me, I use search button, but my recovery is a different version than yours. If you give up, flash a different recovery file.
Click to expand...
Click to collapse
thanks MENU button here
now thinking which to install, any idea wich is must stable some from android 2.3 and up? was thinking on
Sent from my HTC Desire S using Tapatalk 2

why dont u just use the touch recovery of twrp. it works fine

Well right now you're on the old baseband, so make sure to flash a baseband fix if you install anything from 2.3 or up, you can download the fix here: http://www.mediafire.com/?tjyibxdbqyyrmwz make sure to install the fix every time you install a new rom.
As for the most stable rom, you'll have to try them and see which one you like. That being said, I've heard nothing but good things about oxygen rom.

Souron29 said:
why dont u just use the touch recovery of twrp. it works fine
Click to expand...
Click to collapse
yeah downloaded it but just saw menu button works, can anyone direct me on old BB roms? or should i upgrade baseband?
Sent from my HTC Desire S using Tapatalk 2

Taurdas said:
yeah downloaded it but just saw menu button works, can anyone direct me on old BB roms? or should i upgrade baseband?
Sent from my HTC Desire S using Tapatalk 2
Click to expand...
Click to collapse
Upgrade baseband! But read carefully all the steps first.
Sent from my Ainovo Flame (Nexus 7) using Tapatalk 2

in oxygen rom thread he advices to upgrade new baseband and a recovery with new BB...
Sent from my HTC Desire S using Tapatalk 2

You don't have to upgrade the baseband, he just recommends it because the new baseband gives better reception, if you use the baseband fix you can use any rom you like. If you do want to upgrade the baseband though, just use lg's official gingerbread updater, it's the safest way.

[Q] Bricked my HTC One S

Hi all,
Got mine today, tried to install a ROM and it got stuck in bootloop.
I did a number of stupid things not to mention wiping the SD and im in serious trouble.
I can get into bootloader and CWM but thats it.
Ive heard restoring a RUU can cure it but I have a MAC and cant find anything to help.
Can anyone help? Im gutted....and fell like an idiot.
Ive got an S4 on the three network.
Thanks

Hold down the power button for 10 seconds then after the touch buttons stop flashing, just hold the volume button and see if ot enters the bootloader.
Sent from my HTC One S using xda app-developers app

blackcell1 said:
Hold down the power button for 10 seconds then after the touch buttons stop flashing, just hold the volume button and see if ot enters the bootloader.
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
Hi,
It enters into bootloader but then what?

Follow the guide here from how to flash custom rom
http://forum.xda-developers.com/showthread.php?p=24478083
Sent from my HTC One S using xda app-developers app

blackcell1 said:
Follow the guide here from how to flash custom rom
http://forum.xda-developers.com/showthread.php?p=24478083
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
Its sent and wrote the recovery file but what now?

mikejasonsmith said:
Its sent and wrote the recovery file but what now?
Click to expand...
Click to collapse
Specifically you'll have to flash the ROM zip file from the recovery and then use fastboot flash boot boot.img.
You can find boot.img inside the ROM zip file

Tried flashing ROM zip but no joy...when should i flash boot img? before or after recovery?

mikejasonsmith said:
Tried flashing ROM zip but no joy...when should i flash boot img? before or after recovery?
Click to expand...
Click to collapse
ok managed to get the sd mounted...phew...but how do i get a rom on when it wont boot?

mikejasonsmith said:
ok managed to get the sd mounted...phew...but how do i get a rom on when it wont boot?
Click to expand...
Click to collapse
Ive used TRW to get the sd mounted but it wont boot beyond that. i restored the stock recovery but what do i do next?
At the moment i have a phone which has CWM working but nothing else?
Thanks for your help

mikejasonsmith said:
Ive used TRW to get the sd mounted but it wont boot beyond that. i restored the stock recovery but what do i do next?
At the moment i have a phone which has CWM working but nothing else?
Thanks for your help
Click to expand...
Click to collapse
ok so ive tried flashing ruu and keep getting error 155 which is a cid issue i believe - which RUU do i use for a device locked to '3'?
Thanks
oh and can you point me in the direction of it...thanks

mikejasonsmith said:
ok so ive tried flashing ruu and keep getting error 155 which is a cid issue i believe - which RUU do i use for a device locked to '3'?
Thanks
oh and can you point me in the direction of it...thanks
Click to expand...
Click to collapse
so ive managed to get the h3g rom and flashed rom and boot.img.
locked bootloader and run RUU but i keep getting error 155???
Somebody please help me before this thing goes out of the window.....:crying:

Search adb push
Sent from my HTC One S using Tapatalk 2

danevianta said:
Search adb push
Sent from my HTC One S using Tapatalk 2
Click to expand...
Click to collapse
Finally seem to have done it and managed to RUU
The phone is locked to 3 but as a noob I spent 2 days flashing a generic euro ROM.
When i realised i need a ROM to match CID i downloaded 1.53. Tried this a number of times with no joy.
Just tried 1.78 and it seems to be working
Thanks to everyone for your help - us noobs must be sooooooo annoying.

Htc One S bricked
Hi im relatively new at rooting and am currently experiencing issues with a bricked device.
i have two htc one s devices
my personal one is running cm10 ville with clockwork touch recovery and is working perfectly
however the second one i was using the same exact files.
this one is bricked
its in a constant bootloop.
i can get back to my recovery just fine and get to the fastboot in the phone fine
i cleared my cache
wiped my data and wiped the dalvik cache all perfectly fine when i try to flash the cm10 official rom back on it cannot mount the sd card
i would try to install a different recovery and try again maybe using viper one s
but i cannot get the phone to power on
it doesnt showup on the computer when it is plugged in while in fastboot
when i try the cmd fastboot flash recovery it says waiting for device
any advice. this is not my own phone so i need it repaired pretty quickly.
any helpful information would be much appreciated.

FaLLeN_BtB said:
Hi im relatively new at rooting and am currently experiencing issues with a bricked device.
i have two htc one s devices
my personal one is running cm10 ville with clockwork touch recovery and is working perfectly
however the second one i was using the same exact files.
this one is bricked
its in a constant bootloop.
i can get back to my recovery just fine and get to the fastboot in the phone fine
i cleared my cache
wiped my data and wiped the dalvik cache all perfectly fine when i try to flash the cm10 official rom back on it cannot mount the sd card
i would try to install a different recovery and try again maybe using viper one s
but i cannot get the phone to power on
it doesnt showup on the computer when it is plugged in while in fastboot
when i try the cmd fastboot flash recovery it says waiting for device
any advice. this is not my own phone so i need it repaired pretty quickly.
any helpful information would be much appreciated.
Click to expand...
Click to collapse
Bootloop does not mean your bricked...means you need to fastboot flash boot.img
Sent from my HTC One S using xda premium

blackcell1 said:
Hold down the power button for 10 seconds then after the touch buttons stop flashing, just hold the volume button and see if ot enters the bootloader.
Sent from my HTC One S using xda app-developers app
Click to expand...
Click to collapse
This little post just pulled me out of missery. Love ya man!

all you guys getting sorted
make a nandroid and sdcard bu NOW and put them on pc,
obviously leave a copy of nandroid on phone also
makes it a lot easier if you get in trouble again
and you/we will

Mounts and Storage --> Format everything --> Now Mount USB Drive --> Put Gapps and ROM
Flash it, erase cache & and Dalvik...Blah blah blah. Flash boot.img in fastboot, and there you go.
Everybody, please remember this and there won't be noob q&a anymore...

TWRP v 2.2.2.1 I can't flash Jelly Bean 4.2.2 .zip on HTC one s (s3)
HI, my device is an HTC ONE S (s3)... I've already unlocked the bootloader and rooted it... it's ok... For recovery mode I installed TWRP v 2.2.2.1.... I've wiped the cache and made a factory reset... BUT when I try to flash the zip which contains the jelly bean 4.2.2 I get a message saying: FAILED when i was trying to install it... PLEASE I NEED YOUR HELP CUZ I THINK I CAN'T DO TOO MUCH WITHOUT AN OS ON MY DEVICE... I'M NOW JUST IN TWRP... HELP PLEASE........

mikebryant2807 said:
HI, my device is an HTC ONE S (s3)... I've already unlocked the bootloader and rooted it... it's ok... For recovery mode I installed TWRP v 2.2.2.1.... I've wiped the cache and made a factory reset... BUT when I try to flash the zip which contains the jelly bean 4.2.2 I get a message saying: FAILED when i was trying to install it... PLEASE I NEED YOUR HELP CUZ I THINK I CAN'T DO TOO MUCH WITHOUT AN OS ON MY DEVICE... I'M NOW JUST IN TWRP... HELP PLEASE........
Click to expand...
Click to collapse
See other reply.

[Q] Reboot loop after JmzM4 custom kernel

Hello,
I recently unlocked my bootloader and installed the CWM recovery to install custom kernels for overclocking (my htc one mini is not rooted). So I went for the JmzM4_Kernel-09-4-13. And since I installed it I am in a F$%&/&%$ reboot loop. I already wiped the cache and dalvik cache twice but it doesn't help. I searched already for answers on google but I didn't find what needed, so I landed here.
Hope somebody can help me to get out of this reboot loop and get a normal smartphone again
Thank you for your attention
Here are the bootloader specs:
***Tampered***
***unlocked***
M4_UL PVT SHIP S-ON RL
HBOOT-2.21.0000
RADIO-1.23.40e.00.26
OpenDSP-v19.2.0268.0927
OS-2.12.161.2
eMMC-boot 1024MB
Nov 26 2013,22:09:21.0

Did you flash the boot.img using flashboot from the kernel zip? also are you using jelly bean 4.2.2? because that's what it was built for.
Also there are no options to over clock using this kernel...
Sent from my HTC One using Xparent Green Tapatalk 2

Thank you for your reply :good:
Yes I did flash the boot.img with flashboot, but I have android 4.3 and sense 5.5 on it. Is that maybe the problem?
A friend of me said that if I flash an incompatible kernel on my device, it would be dead. Is that true? I don't think so because I still have acess to the bootloader and CWM recovery .

shouldn't brick your phone, but your gonna need to flash a kernel compatible with 4.3. There isn't one in this forum, but if you ask one of the rom devs on here really nicely they may provide a compatible kernel from one of their rom releases. Else your gonna have to re flash your rom..
Sent from my HTC One using Xparent Green Tapatalk 2

And how do I find the original/stock kernel for htc one mini 4.3 ?
Can I install HTC one kernels or are the two phones completely different?
I already searched on the net for htc one mini kernels. There is almost nothing !!!!!

Quent1_Lat said:
And how do I find the original/stock kernel for htc one mini 4.3 ?
Can I install HTC one kernels or are the two phones completely different?
I already searched on the net for htc one mini kernels. There is almost nothing !!!!!
Click to expand...
Click to collapse
there are NO 4.3 kernels as of yet. I'm saying you need ask a dev to make you one,but I doubt they'll do it unless you ask really really nicely. Your most likely going to have to flash a whole rom..
AND NO HTC ONE AND HTC ONE MINI A VERY DIFFERENT. DO NOT USE ANY KERNEL UNLESS IT'S MADE FOR THE ONE MINI. OR YOU MAY BRICK YOUR PHONE.
Sent from my HTC One using Xparent Green Tapatalk 2

RuffBuster said:
there are NO 4.3 kernels as of yet. I'm saying you need ask a dev to make you one,but I doubt they'll do it unless you ask really really nicely. Your most likely going to have to flash a whole rom..
AND NO HTC ONE AND HTC ONE MINI A VERY DIFFERENT. DO NOT USE ANY KERNEL UNLESS IT'S MADE FOR THE ONE MINI. OR YOU MAY BRICK YOUR PHONE.
Sent from my HTC One using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
ok, I think I will go for the second option: I will flash a rom.
So here my question: What kind of rom do I have to flash, to come out of the bootloop?
I am a beginner in this kind of thing so please explain it to me step by step.

Quent1_Lat said:
ok, I think I will go for the second option: I will flash a rom.
So here my question: What kind of rom do I have to flash, to come out of the bootloop?
I am a beginner in this kind of thing so please explain it to me step by step.
Click to expand...
Click to collapse
Personally I would only recommend the one I am currently using, as I haven't tried any others except WWE Stock 4.2.2 by trigger, which is the base of what I'm using, which is Magio R3 with the JMZ Kernel. I used the guide below which worked without problems. BUT BEFORE YOU DO MAYBE MAKE A POST ABOUT CHANGING FROM 4.3 TO 4.2.2 JUST BECAUSE I AM NO EXPERT, AND I'M UNSURE IF THERE COULD BE ISSUES WITH THIS? THOUGH I THINK IT SHOULD BE FINE.
Else stick with the 4.3 Stock ROM by Trigger though this is untested by me. Also skip the kernel installation if using the 4.3 ROM.
THE GUIDE:
Ecstacy42 said:
Don't do it if you don't feel comfortable.
1. Unlock your bootloader here. Select "All Other Supported Models" and follow the instructions.
2. Download the Rom, Kernel, and a recovery, verify the MD5 checksums, and then copy the rom and kernel zips to your internal SD card. I'd recommend one of the WWE versions as they don't have a lot of the AT&T bloat.
3. Boot into the bootloader (it says how in the guide showing you how to unlock your bootloader)
4. Select fastboot, plug your phone into your computer.
5. Type "fastboot devices" to make sure it's connected, then type "fastboot flash recovery whateverrecoveryyouused.img".
6. Boot into recovery. Make a backup. Then wipe system, data, cache, and dalvik cache.
7. Reboot into fastboot, then type "fastboot flash boot boot.img" using the boot.img from the Rom you downloaded.
8. Reboot into recovery and install the rom zip using TWRP/ClockworkMod.
9. Reboot into fastboot and type "fastboot flash boot boot.img" using the boot.img from the kernel.
10. Reboot into recovery and flash the kernal zip.
11. Start up your phone, if you flashed a DeOdexed Rom it'll take a little while to boot up.
I'm not sure if you have to flash the boot.img from the rom, then flash it, then flash the boot.img from the kernel and then flash it, but it's best to follow the directions and avoid potentially causing problems.
Click to expand...
Click to collapse
Sent from my HTC One using Xparent Green Tapatalk 2

RuffBuster said:
Personally I would only recommend the one I am currently using, as I haven't tried any others except WWE Stock 4.2.2 by trigger, which is the base of what I'm using, which is Magio R3 with the JMZ Kernel. I used the guide below which worked without problems. BUT BEFORE YOU DO MAYBE MAKE A POST ABOUT CHANGING FROM 4.3 TO 4.2.2 JUST BECAUSE I AM NO EXPERT, AND I'M UNSURE IF THERE COULD BE ISSUES WITH THIS? THOUGH I THINK IT SHOULD BE FINE.
Else stick with the 4.3 Stock ROM by Trigger though this is untested by me. Also skip the kernel installation if using the 4.3 ROM.
THE GUIDE:
Sent from my HTC One using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
ok thank you,
but when I have the rom for my htc one mini, how do I place it in the main storage ( as a zip ). It can boot properly and reboots before my computer can detect it.
And is this Magio r3 rom compatible with the htc on mini? On the website it is shown that it is for htc one XL. And it also says that the recovery has to be the TWRP recovery and I have the CWM recovery.
Thank you for your answer. :good:

Quent1_Lat said:
ok thank you,
but when I have the rom for my htc one mini, how do I place it in the main storage ( as a zip ). It can boot properly and reboots before my computer can detect it.
And is this Magio r3 rom compatible with the htc on mini? On the website it is shown that it is for htc one XL. And it also says that the recovery has to be the TWRP recovery and I have the CWM recovery.
Thank you for your answer. :good:
Click to expand...
Click to collapse
Everything you need is here on the XDA, "HTC One mini" section. ONLY USE ROMS WHICH ARE SPECIFICALLY FOR THE "ONE MINI". NO OTHER. EVER.
Just use this one it's 4.3 stock. You flash it as a ZIP from either CWM or TWRP.
http://forum.xda-developers.com/showthread.php?t=2575766
And read the OP!
Also once this is working. DON'T FLASH YOUR PHONE EVER AGAIN. YOU CLEARLY HAVEN'T READ UP ENOUGH AND DON'T CARE ABOUT YOUR PHONE. No offense but do you really want a $500 paper weight?
Sent from my HTC One using Xparent Green Tapatalk 2

I used recovery to mount usb storage worked for me
Sent from my HTC One mini using XDA Premium 4 mobile app

RuffBuster said:
Everything you need is here on the XDA, "HTC One mini" section. ONLY USE ROMS WHICH ARE SPECIFICALLY FOR THE "ONE MINI". NO OTHER. EVER.
Just use this one it's 4.3 stock. You flash it as a ZIP from either CWM or TWRP.
http://forum.xda-developers.com/showthread.php?t=2575766
And read the OP!
Also once this is working. DON'T FLASH YOUR PHONE EVER AGAIN. YOU CLEARLY HAVEN'T READ UP ENOUGH AND DON'T CARE ABOUT YOUR PHONE. No offense but do you really want a $500 paper weight?
Sent from my HTC One using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
But how do I flash the odex rom?
I already tried to flash the whole zip file with fastboot, but the file is too big. the cmd says Failed(remote:data lenght is too large).
So how do I bring this rom to recovery from my computer?
Thank you for your answer.

RuffBuster said:
Everything you need is here on the XDA, "HTC One mini" section. ONLY USE ROMS WHICH ARE SPECIFICALLY FOR THE "ONE MINI". NO OTHER. EVER.
Just use this one it's 4.3 stock. You flash it as a ZIP from either CWM or TWRP.
http://forum.xda-developers.com/showthread.php?t=2575766
And read the OP!
Also once this is working. DON'T FLASH YOUR PHONE EVER AGAIN. YOU CLEARLY HAVEN'T READ UP ENOUGH AND DON'T CARE ABOUT YOUR PHONE. No offense but do you really want a $500 paper weight?
Sent from my HTC One using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
But How do I flash my rom.zip? I cannot flash it from fastboot because it shows an error message in the cmd : Failed(remote: data length is too high). How do I get this $%&%&## file on my recovery or how do I flash it directly from my computer. I already searched the web on how do I do this. But no detailed or specific answer to my problem.
Please explain it to me step by step again :good:

sahilg009 said:
I used recovery to mount usb storage worked for me
Sent from my HTC One mini using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I already tried this version. I went into my CWM recovery in mout and storage and tried the "mount /external_sd" but it shows me the error message: Error mounting / external_sd!
But thank you anyway :good:

Quent1_Lat said:
I already tried this version. I went into my CWM recovery in mout and storage and tried the "mount /external_sd" but it shows me the error message: Error mounting / external_sd!
But thank you anyway :good:
Click to expand...
Click to collapse
You need to "push" the zip to your internal memory. Put your zip in your ADB fastboot folder on your computer. Then use command "adb push romname.zip /mnt/sdcard/". Then install the zip from cwm or twrp recovery. And flash the boot.img from zip with ADB fastboot...
Sent from my HTC One using Xparent Green Tapatalk 2

RuffBuster said:
You need to "push" the zip to your internal memory. Put your zip in your ADB fastboot folder on your computer. Then use command "adb push romname.zip /mnt/sdcard/". Then install the zip from cwm or twrp recovery. And flash the boot.img from zip with ADB fastboot...
Sent from my HTC One using Xparent Green Tapatalk 2
Click to expand...
Click to collapse
I tried adb push but the cmd didn't reconize it. It says (from german, I try to translate it) : the order adb push is either wrong writen or it couldn't be found. So how do I use or reactivate adb push ? or maybe there is another way to push the file in the htc ( for example with a program ).
Thanks in advance

Quent1_Lat said:
I tried adb push but the cmd didn't reconize it. It says (from german, I try to translate it) : the order adb push is either wrong writen or it couldn't be found. So how do I use or reactivate adb push ? or maybe there is another way to push the file in the htc ( for example with a program ).
Thanks in advance
Click to expand...
Click to collapse
flash the twrp recovery.

abzboi said:
flash the twrp recovery.
Click to expand...
Click to collapse
Already done. But nothing changes. still have the same problem.
But cool recovery

Quent1_Lat said:
Already done. But nothing changes. still have the same problem.
But cool recovery
Click to expand...
Click to collapse
Does the command "ADB devices" without the "" show your device listed?
Sent from my HTC One using Xparent Green Tapatalk 2