[Q] Need help with installing team blue droid on my HD2 - General Questions and Answers

Hello,
I really need help with the following:
I have a HTC hd2 and i want to install the ROM from team blue droid (http://forum.xda-developers.com/showthread.php?t=1275119).
So this is what i do.
I put off my WPH and start install HSPL4 version 2.08 HSPL without problems.
So i next i open the map Radio leo 2.15.50.14 on my pc and i opened the CustomRuu.exe.
Again without problems.
Next i put MAGLDR 1.13 on my phone.
Yes yes again without problems.
I flash my HD2 so i can go in the ClockworkMod recovery V3.0.0.5.
Without problems
Now i get out my 8GB SDHC card out of my phone and put it in the pc.
Downloading TBD_Sensation_XL_Gen3_stock_V3.6 and i put it on my HD2.
Now i go start my phone in MAGLDR 1.13 and i select option 8 (AD RECOVERY)
Install zip from SD card.
And i start installing TBD_Sensation_XL_Gen3_stock_v3.6.zip
This is what i get:
! ! ! ! ! ! ! ! ! ! ! WARNING ! ! ! ! ! ! ! ! ! ! !
You are attempting to install TDB on an EU HD2 without the required 1Gb minimum ext partition on your SD card.
Please reformat tour card and then use recovery to partition it as instructed in the TBD thread.​
INSTALL FROM SDCARD COMPLETE.
So i put the card in the pc and i see this:
FAT32
USED 2,61 GB
FREE 4,66 GB
Can somebody please help me??????

You need to go to AD recovery option in magldr again, then go to advanced then to partition sd card.
Select 1024 for the sdext partition and 0 for swap.
The rest of the card will be partitioned to fat32 file sysytem.
Then re-copy zip to sd card and proceed as before...

Now
shanman-2 said:
You need to go to AD recovery option in magldr again, then go to advanced then to partition sd card.
Select 1024 for the sdext partition and 0 for swap.
The rest of the card will be partitioned to fat32 file sysytem.
Then re-copy zip to sd card and proceed as before...
Click to expand...
Click to collapse
Now trying hope it works

Nooo
Now it says.
Error error (status 0)
Im now downloading zip again and put it again on sd card.
Sorry for double post

Go to recovery again and wipe cache partition, wipe data and in advanced wipe dalvic cache.
does the error appears when you try to install?

Answer
shanman-2 said:
Go to recovery again and wipe cache partition, wipe data and in advanced wipe dalvic cache.
does the error appears when you try to install?
Click to expand...
Click to collapse
wipe cache partition OK
wipe data OK
wipe dalvic cache OK
does the error appears when you try to install? YES
NOW TRYING AGAIN
-------------------------------------------
NOW EXTRACTING ROM FILES

jeffreydevos said:
Now it says.
Error error (status 0)
Im now downloading zip again and put it again on sd card.
Sorry for double post
Click to expand...
Click to collapse
Good idea.
I then suggest you go to the rom thread and read carefully the installation instructions. This rom will not work without an ext partition on EU hd2 handsets as internal memory size is too small.

shanman-2 said:
Good idea.
I then suggest you go to the rom thread and read carefully the installation instructions. This rom will not work without an ext partition on EU hd2 handsets as internal memory size is too small.
Click to expand...
Click to collapse
Where can i see internal memory space.
PATCH APPLIED
setting busy box
90%

SEE PAGE 2
SORRY this post was a mistake

If you have adb installed you can do
adb shell
then type
#free
and you will see something like this...
free
total used free shared buffers
Mem: 421384 320512 100872 0 5456
-/+ buffers: 315056 106328
Swap: 0 0 0

Install complete but now it stuck on TBD roms (splash screen)

Have you partitioned your nand correctly
MAGLDR/CLK EU 5/175/8 with 1024mb Ext4 Partition (the SD-Ext being mandatory!)
175MB SYSTEM PARTITION
8MB CACHE.

shanman-2 said:
Have you partitioned your nand correctly
MAGLDR/CLK EU 5/175/8 with 1024mb Ext4 Partition (the SD-Ext being mandatory!)
175MB SYSTEM PARTITION
8MB CACHE.
Click to expand...
Click to collapse
Huh wtf i'm NOOB

jeffreydevos said:
Huh wtf i'm NOOB
Click to expand...
Click to collapse
Therefore you have a lot of reading to do..
You have to set up a partition big enough to hold your rom!!!
There are numerous guides out there.
If your not already using the HD2 Nand Toolkit I suggest you download http://forum.xda-developers.com/showthread.php?t=1090783 Thanks ksubedi it and do this..
1.Task29....this wipes all data from nand.
2. magldr repartion ..set sizes 175 for system partition and 8mb for cache don't worry about the 5 this is set by default.
3. Magldr Update recovery.
4.Install nand as before....
Read read read.
http://forum.xda-developers.com/showthread.php?t=1021837 Thanks T-Macgnolia
http://forum.xda-developers.com/showthread.php?t=1336700 Thanks yz.hd
I am going out now it's Paddy's Day and I am a Paddy!! lol

Thanks man now it works I LOVE U

No need to go that far,but I am glad your up and running..

Related

trojan final????

Im currently running the supermagicv2r3 on my mt3g. can any one tell me how to flash the trojan_final.zip briefly. im running 32b. its hard to understand through all these post. i usually tube it. If its ne one out there i would appreciate it. oh and tell me what else i need to download. i already have the 1.3.2 recovery image by Amon Ra, and i downloaded trojan_final.zip
Eugene's trojan? I believe you have to flash over the 32A radio and recovery image through fastboot. If you don't know what you are doing, I suggest you don't do attempt it because you will brick your phone. This also belongs in general.
You should go here if you need further help that goes into more detail than the little tid bit that I have given you.
http://forum.xda-developers.com/showthread.php?t=545005
or here: http://forum.xda-developers.com/forumdisplay.php?f=493&nojs=1#goto_forumsearch
tazz9690 said:
Eugene's trojan? I believe you have to flash over the 32A radio and recovery image through fastboot. If you don't know what you are doing, I suggest you don't do attempt it because you will brick your phone. This also belongs in general.
You should go here if you need further help that goes into more detail than the little tid bit that I have given you.
http://forum.xda-developers.com/showthread.php?t=545005
Click to expand...
Click to collapse
i kno what i am doing as far as. rooting my phone back to 1.5. downloading flash
rec plus the recovery image. flashing the rec image. rebooting the phone to rec image. then once i drag the rom onto my sd card. wiping factory reset and ext partition. then part sd: fat32 blah blah blah. and converting ext2 to ext3. but all these other words is like new to me. i kno what to do. juss not exactly
I don't want to give you false information. I would go check Eugene's thread to see if you need the 32A radio, but he removed everything because he has decided to move to another forum. I need confirmation on that. Do you know if it's for 32A or for 32B?
Also, do you know how to use fastboot/adb?
tazz9690 said:
I don't want to give you false information. I would go check Eugene's thread to see if you need the 32A radio, but he removed everything because he has decided to move to another forum. I need confirmation on that. Do you know if it's for 32A or for 32B?
Also, do you know how to use fastboot/adb?
Click to expand...
Click to collapse
well my build number is 3.03.751.4 32b. so im guessing my phone is 32b. and i dont kno how to use that. i would just need a step by step tutorial.. and all the downloads besides rec image 1.3.2 and trojan_final.zip
Esquire22 said:
well my build number is 3.03.751.4 32b. so im guessing my phone is 32b. and i dont kno how to use that. i would just need a step by step tutorial.. and all the downloads besides rec image 1.3.2 and trojan_final.zip
Click to expand...
Click to collapse
i just checked on his other forum that he is now at. apparently it's a 32B so you don't have to worry about fastboot. just wipe data/factory reset. Then wipe your ext and davlik. Then wipe data/factory reset again for good measure. Then flash the rom.
Or if you want a clean flash, repartition your sd card fat32+ext+swap, upgrade ext2 to ext3, repair file systems, wipe data/factory reset, then flash the rom.
tazz9690 said:
i just checked on his other forum that he is now at. apparently it's a 32B so you don't have to worry about fastboot. just wipe data/factory reset. Then wipe your ext and davlik. Then wipe data/factory reset again for good measure. Then flash the rom.
Or if you want a clean flash, repartition your sd card fat32+ext+swap, upgrade ext2 to ext3, repair file systems, wipe data/factory reset, then flash the rom.
Click to expand...
Click to collapse
I really appreciate that for real... so the second way is the best to go? and is there a fat32+ext+swap option in the newest recovery image by Amon Ra. which is recovery-RA-magic-v1.3.2G.img?
yeah it's the best way to go and it does have that option. You can even choose the values of how big you want your ext and swap. This recovery image is a lot better than his last one.
tazz9690 said:
yeah it's the best way to go and it does have that option. You can even choose the values of how big you want your ext and swap. This recovery image is a lot better than his last one.
Click to expand...
Click to collapse
lol what exactly do u mean by values of ext and swap? and can i use the same flashrec i downloaded to use the supermagicv2r3 which is flashrec-1.1.2-20090909.apk. im sorry but these words with ext swap i dont really kno what they do i just follow instructions. but i wouldnt mind knowing the meaning
I don't know about the apk. Just go into your recovery image by pressing home and back. flash the rom from there.
ext is where your apps go for apps2sd. swap gives the phone virtual memory that is fed off the memory card to make up for the lack of ram that the phones we have. the original hero has 288MB and our phones that are google branded or 32B only have 192.
tazz9690 said:
i just checked on his other forum that he is now at. apparently it's a 32B so you don't have to worry about fastboot. just wipe data/factory reset. Then wipe your ext and davlik. Then wipe data/factory reset again for good measure. Then flash the rom.
Or if you want a clean flash, repartition your sd card fat32+ext+swap, upgrade ext2 to ext3, repair file systems, wipe data/factory reset, then flash the rom.
Click to expand...
Click to collapse
i just tried what u said to do but when i try to update the trojan_final.zip. it says download aborted (bad). i wipe data wipe ext and davlik , wipe again then i try to flash rom and it isnt working. and i also put the swap to 64 and left the ext at 512. would that be a problem?
Esquire22 said:
i just tried what u said to do but when i try to update the trojan_final.zip. it says download aborted (bad). i wipe data wipe ext and davlik , wipe again then i try to flash rom and it isnt working. and i also put the swap to 64 and left the ext at 512. would that be a problem?
Click to expand...
Click to collapse
scratch that it worked perfectly! thanks a whole lot man! ur the best.. if i have ne questions i would post u. if u have twitter... twitter.com/esquiire can i keep my swap at 64 and my ext at 512? or do u recommend something better? and what is converting ext3 to ext4. and whats the process?
boot to recovery
and select partition
partition sd
swap-size minimum 64 (use track balll to change numbers)
press home
ext2 size leave size as is and fat 32
press home to partition
ok then
select usb-ms toggle
copy trojan-final across to card
reboot phone to recovery
select
flash update
choose.zip
select zip and flash
be warned bluetooth does not work on 32b hero roms
when you get more used to rom updates you could try the 32a hack to get bluetooth working
sitimber said:
boot to recovery
and select partition
partition sd
swap-size minimum 64 (use track balll to change numbers)
press home
ext2 size leave size as is and fat 32
press home to partition
ok then
select usb-ms toggle
copy trojan-final across to card
reboot phone to recovery
select
flash update
choose.zip
select zip and flash
Click to expand...
Click to collapse
thanks. and that is supposed to speed up my phone? and if i do that will i have to redownload all of my apps back again. just got done putting dem back on. and whats ext3 to ext4?
find a back up for apps on market before you wipe
sitimber said:
find a back up for apps on market before you wipe
Click to expand...
Click to collapse
can i convert ext3 to ext4 during that process? if so when?
before installing new rom have sd card all set and ready for new rom
sitimber said:
find a back up for apps on market before you wipe
Click to expand...
Click to collapse
how to find back up for apps? could not find one

[Q] ext3 on dexters

I have been trying forever to get ext3 working on my phone. I have 3 primary partitions; fat32, ext3 and linux swap. I used a card reader to create them via Partition wizard. Every software can see the 3 partitions, but my phone wont pick up the ext3. I tried wiping everything, reflashing dexter's rom, but i just cannot get it to work. I still see only 134mb on internal memory and it decreases as i install apps. I have even tried using link2sd but that gives me an error ("Mount script cannot be created"). Any help will be greatly appreciated. Thanks in advance.
Frisbee6 said:
I have been trying forever to get ext3 working on my phone. I have 3 primary partitions; fat32, ext3 and linux swap. I used a card reader to create them via Partition wizard. Every software can see the 3 partitions, but my phone wont pick up the ext3. I tried wiping everything, reflashing dexter's rom, but i just cannot get it to work. I still see only 134mb on internal memory and it decreases as i install apps. I have even tried using link2sd but that gives me an error ("Mount script cannot be created"). Any help will be greatly appreciated. Thanks in advance.
Click to expand...
Click to collapse
Me too, I used Miui optimize rom and Steel v4 (
Sent from my XT720 using XDA Premium App
That's strange. My EXT3 partition works both in Dexter's rom and in the Steelblue V4 rom.
I used gparted under Linux to do my partitioning. What I did was to resize the existing FAT32 partition and move it all the way to the right. Then I created a 2gb EXT3 partition all the way at the left. From there I created a 256mb swap partition in the middle, and I resized the FAT32 partition to take up the rest of the drive.
Did you guys remember to create an "app" folder on the EXT3 partition?
There are other folders that you can create to put the delvik cache on there among other things. I just don't remember off hand what you need to name them as.
Ya there is a folder there called apps, but for some reason, nothing is moving into it. do i need to run some sort of a script? what i did:
1. flashed dexters 1.3
2. partitioned sd card using partition wizard with a fat32, a ext3 and a swap partition
3. booted up phone, internal memory shows 134mb, all apps installed go to internal memory.
4. terminal shows ext partition with 1100 mb free space
Am i missing a step?
Thanks in advance
Frisbee6 said:
Ya there is a folder there called apps, but for some reason, nothing is moving into it. do i need to run some sort of a script? what i did:
1. flashed dexters 1.3
2. partitioned sd card using partition wizard with a fat32, a ext3 and a swap partition
3. booted up phone, internal memory shows 134mb, all apps installed go to internal memory.
4. terminal shows ext partition with 1100 mb free space
Am i missing a step?
Thanks in advance
Click to expand...
Click to collapse
not folder apps but app no s....if your ext3 working fine then shud have lost+found folder @/sd-ext.. create app folder using root explorer then reboot..now your app shud automatically move to sd-ext..
and create cache folder dalvik-cache
Well i did what you guys said and now my apps are going to /sd-ext/app but im also losing space in the internal memory, and it does not show internal + ext3, it only shows internal. You guys have any idea whats happening?
Thanks for all your help guys.
Frisbee6 said:
Well i did what you guys said and now my apps are going to /sd-ext/app but im also losing space in the internal memory, and it does not show internal + ext3, it only shows internal. You guys have any idea whats happening?
Thanks for all your help guys.
Click to expand...
Click to collapse
Are you using Dexter 1.3 without any patches?
[If so, probably your dalvik-cache is on /data? So... even though the apps are going into /sd-ext, the optimized versions of the dex are being stored on internal memory.]
Yes... no patches, and dalvik is going to /data. Any idea whats up?
Frisbee6 said:
Yes... no patches, and dalvik is going to /data. Any idea whats up?
Click to expand...
Click to collapse
That's just how Dexter's 1.3 works by default and one of the reasons I started the bugfix patches. If you apply bugfix patch 3 dalvik-cache will move to /cache automatically (you can optionally move it to /sd-ext by creating /sd-ext/dalvik-cache and rebooting).
http://forum.xda-developers.com/showthread.php?t=995989
Or, if you don't want the patch, you can maybe use Androidiani OpenRecovery--it has a menu option to install an init script to move dalvik-cache to /cache. I haven't tested whether that works or not, though.
After this patch, now the /sd-ext/app folder deletes itself after i restart the phone, tried a few times, same goes for davlik-cache. This is crazy every thing that could go wrong has gone wrong, thanks again for your help. You got any other suggestions?
I do not understand what you worry?
It works now, thanks alot for all your help guys, really appreciate it!
Frisbee6 said:
It works now, thanks alot for all your help guys, really appreciate it!
Click to expand...
Click to collapse
How you did it?
V_XT720 said:
How you did it?
Click to expand...
Click to collapse
1. Formatted my card to the required partitions.
2. Flashed dexters rom followed by Mioze7Ae's bugfix 3.
3. Using root explorer I created /app folder.
4. Downloaded apps like there's no tomorrow.
Sent from my XT720 using XDA App
I tried two different ways to partition my sd:
1) I used Gpatred and I did everything as described here - http://www.youtube.com/watch?v=6z1Tu9l8WNc&feature=related.
2) I used MiniTooLsPartition Wizard and Root explorer to create app and dalvik-cache folders.
In both cases, everything seems fine....until i install some apps. After restart the phone can not load the android. The phone only shows M logo and restart. If I remove the card then OS load. What I have to do? Thanks in advance.
Are you partitioning your sd while its in the phone? Use a card reader if possible. Wipe clean your partitions and wipe data and dalvik cache. Then try again, although i did not have the problem that you mention, are you running any other scripts? eg. darktremors?
What I did:
1. Clean Installation of Steelblue V4 rom.
2. Two primary partitions (FAT32 and EXT3). I used card reader.
3. App and dalvik-cache folders on ext3 partition.
4. Wipe clean partitions and wipe data and dalvik cache.
After first reboot everything was fine. Then I installed a root explorer to check a ext3 partition. The app and dalvik-cache folders were there. I decided to restart the phone again before I install anything else and nothing happened....only M logo
V_XT720 said:
What I did:
1. Clean Installation of Steelblue V4 rom.
2. Two primary partitions (FAT32 and EXT3). I used card reader.
3. App and dalvik-cache folders on ext3 partition.
4. Wipe clean partitions and wipe data and dalvik cache.
After first reboot everything was fine. Then I installed a root explorer to check a ext3 partition. The app and dalvik-cache folders were there. I decided to restart the phone again before I install anything else and nothing happened....only M logo
Click to expand...
Click to collapse
dalvik-cache on ext partition will cause bootloops in Khal's ROMs.

Partitioning Problem (Please help)

Hi there first of all sorry for my wrong section and double post but in general forum nobody helped me.
My problem is:i partitionate my 4gb sd card via cwm recovery(512 ext-256swap).
Format cache partiotions.(cwm)
Format sd card.(cwm)
After that i create a fs.data2sd with mmcblk0p2 insde in sdcard/android/data/g3mod.
I install link2sd application but when i start it it tell me that my ext is not mounter.
In Cwm recovery when i press mount sd-ext it gave me an error(i think is:``the file exists already`` or something like this).
In settings/storage my phone tell me i have a 3gb card...so i think partition is done succefully..
So can someone explain what i need to do further.
Thanks alot for you help and i am glad to be member of Xda!
edit:now my sd card is stucked at 3gb how can i extend it back to 4gb?
mod Edit : thread CLOSED u cant do a dual post u need to be patient when posting
use the general or the Q&A(this is a stiky)
Just unmount your card from SdCard and Internal space menu and then format it.
or else you can also format it from CWM recovery.
mohitgalaxy3 said:
Just unmount your card from SdCard and Internal space menu and then format it.
or else you can also format it from CWM recovery.
Click to expand...
Click to collapse
for what is this?and what do you mean ``unmount your card from sdcard?``
i format card but it show 3gb
ghiurtuv said:
for what is this?and what do you mean ``unmount your card from sdcard?``
i format card but it show 3gb
Click to expand...
Click to collapse
This is to format ur sd card to get the 3.6.....gb space back...
unmount it and then format it, or else format it using CWM.
mohitgalaxy3 said:
This is to format ur sd card to get the 3.6.....gb space back...
unmount it and then format it, or else format it using CWM.
Click to expand...
Click to collapse
k i managed to have back 3.6 gb now how can i use data2sd?I think i need to repartitionate.
one more question:can i partition with MiniTool partition wizard(via windows) with usb ?(i don`t have card reader)
ghiurtuv said:
k i managed to have back 3.6 gb now how can i use data2sd?I think i need to repartitionate.
one more question:can i partition with MiniTool partition wizard(via windows) with usb ?(i don`t have card reader)
Click to expand...
Click to collapse
First of all Mini partition is basically used to convert partition...
I'll tell you my way by which I create partition.
1. Boot into Recovery->advanced->partition SD card.
2.ext->256, swap-> 128 or 64.
3. Wipe data, wipe cache, wipe dalvik cache....reboot.
4. phone will take 10 to 15 min.
This trick work on kyrillos 7, if you are on any other ROM like sumee 4 then just cope the fs.convert file in fugumod folder on sd card.
I tested this on both roms....you can check the app2sd partition on titanium back up as well as in internal memory in settings.
That's it man....enjoy.
mohitgalaxy3 said:
First of all Mini partition is basically used to convert partition...
I'll tell you my way by which I create partition.
1. Boot into Recovery->advanced->partition SD card.
2.ext->256, swap-> 128 or 64.
3. Wipe data, wipe cache, wipe dalvik cache....reboot.
4. phone will take 10 to 15 min.
This trick work on kyrillos 7, if you are on any other ROM like sumee 4 then just cope the fs.convert file in fugumod folder on sd card.
I tested this on both roms....you can check the app2sd partition on titanium back up as well as in internal memory in settings.
That's it man....enjoy.
Click to expand...
Click to collapse
i this moment i partitionate with http://forum.xda-developers.com/wiki/index.php?title=SD_card_partitioning
i will try if it doesn`t work i will try again your metod..
p.s:i need any app for that?or what should i make to mode my apps into ext?
ghiurtuv said:
i this moment i partitionate with http://forum.xda-developers.com/wiki/index.php?title=SD_card_partitioning
i will try if it doesn`t work i will try again your metod..
p.s:i need any app for that?or what should i make to mode my apps into ext?
Click to expand...
Click to collapse
you will just need CWM nothing else....
Harry move this thread........
mohitgalaxy3 said:
you will just need CWM nothing else....
Harry move this thread........
Click to expand...
Click to collapse
right now i partitionae with your method i will reply in 5 minutes to tell you if it`s work!
Really appreciate your replies and your help!
ghiurtuv said:
right now i partitionae with your method i will reply in 5 minutes to tell you if it`s work!
Really appreciate your replies and your help!
Click to expand...
Click to collapse
On which ROM you are?
Kyrilos 7 Oc and utliamte 1.4 g3mod kernel
I have another problem now:when i connect usb to pc my phone os not recognized
p.s:i press df on terminal emulator and i don`t see any ext or anything like this.
Finaly i connect to pc but i think data2sd is not working...i install titanium and link2sd...in titanim it show me like this:
System ROM:219MB(20.0 MB free)
Internal: 201MB(77.2MB free)
Sd card: 3.31GB(3.31GB free)
in link 2sd it tell me mount script error.
i need to do domething more?
edit:i choose 512 mb for ext
ghiurtuv said:
Kyrilos 7 Oc and utliamte 1.4 g3mod kernel
I have another problem now:when i connect usb to pc my phone os not recognized
p.s:i press df on terminal emulator and i don`t see any ext or anything like this.
Click to expand...
Click to collapse
Turn on USB debugging and then mount...
I don't know about df command buddy but you can see your a2sd partition in titanium backup.
mohitgalaxy3 said:
Turn on USB debugging and then mount...
I don't know about df command buddy but you can see your a2sd partition in titanium backup.
Click to expand...
Click to collapse
Try G3 mod app to convert partitions...
mohitgalaxy3 said:
Try G3 mod app to convert partitions...
Click to expand...
Click to collapse
I have a file fs.curent in g3mod folder and is like this
ext2
ext4
ext2
i think is converted...but how this help me?cuz in titanium backup i don`t see any a2sd memory..
omg idk why but on my phone nothing work..)
i put in android/data/g3mod fs.data2sd
i restart my phone and now my internal memory it shows 0.00 and in titanium backup i only have system rom and Sd card.
Should i remove fs.data2sd?
ghiurtuv said:
omg idk why but on my phone nothing work..)
i put in android/data/g3mod fs.data2sd
i restart my phone and now my internal memory it shows 0.00 and in titanium backup i only have system rom and Sd card.
Should i remove fs.data2sd?
Click to expand...
Click to collapse
No idea..........try fugumod kernel...remove all the files
I try fugumod 2.2 BE oc 1300mhz...but i think not kernel is problem...
Can anyone help me?pls...
edit:nothing changed on fugumod...i don`t see a2sd in titanium!

[Q] How to partiton sd card from CWM Recovery?

Okay, so, I want to flash hephappy's Cyanogenmod 9 (which looks amazing, btw you should check it out) which requires partitoning of the sd card. This is exactly what it says:
-Partition sdcard: swap-size: 64MB, Ext2-size: 300MB, Continue partitioning, SD:ext2 to ext3
So, I already know this means I have to move the contents of my sd card to a computer if I don't want its contents to be deleted. But anyway, how would I do this through ClockworkMod Recovery version 5.0.2.0? Also, for this ROM, is it completely necassary to paartiton my sd caard, what will happen if i don't, because I don't really need apps on my sd card.
Thanks in advance
It's not necessary
Will run perfect without it. If you want to use swap just use an app that creates a virtual swap on your sd.
Send from my phone...
Wait so your saying I don't even need to patition my sd card? Also, what does swap mean? (lol)
CWM doesn't give you option for creating a partition of 300mb,it gives either 256 or 512 mb.better use amonRA recovery or 512 mb partition.In order to partition first of all BACKUP all the data of your sd card then boot into CMW then go to advanced then partition then create partition then enter the given values of swap and memory.then wait for a while then you are done!! the memory card will be formated too so copy back the backed up files
---------- Post added at 07:47 AM ---------- Previous post was at 07:43 AM ----------
me_death said:
CWM doesn't give you option for creating a partition of 300mb,it gives either 256 or 512 mb.better use amonRA recovery or 512 mb partition.In order to partition first of all BACKUP all the data of your sd card then boot into CMW then go to advanced then partition then create partition then enter the given values of swap and memory.then wait for a while then you are done!! the memory card will be formatted too so copy back the backed up files
Click to expand...
Click to collapse
I also suggest you better use amonRA it partition is really needed then because according to above required requirements,amonRA recovery fulfills it exactly.you can partition 300mb,with swap size 64 mb and upgrade from ext2 to ext3 in that recovery.
I did this yesterday successfully... Backup ur six card data before u do this, cos it gets erased. In Cwm, go to partition sdcard, select ext size 512(doesn't matter if it's not 300) thn swap size 64. After success, reboot phone, install link2sd, run it, allow superuser access, select ext 2 wen it asks, reboot, open link2sd, goto settings, and select automatic linking.
Voila.. U are done!!
Works on my phone. Tested...
Sent from my LG-P500 using XDA
Ever heard of 4ext recovery ??
Sent from my HTC nexus one using XDA

[Resolved] About partitionning sd card (link2sd)

(sorry for my English, I'm french)
Hi guys !
Maybe you gonna think ("another partition thread") but I didn't find anything related to my issue so I'll explain it to you :
I decided to partition my sd card. Everything works fine :
- partition in CWM (1024 for ext, 64 for swap)
- copy back my sd card
- configure link2sd (i choose ext4 at start)
- reboot
Then, I wanted to link all apps to sd. It works for some apps (about an half) but the others didn't want to link. I got this error message :
[INSTALL_FAILED_INSUFFICIENT_STORAGE]
Some apps works, some apps doesn't. It was a veritable mess. So i decid to wipe data and start again from a clean install.
So I :
- partition again in CWM (1024 for ext, 0 for swap)
- copy back only Titanium Backup
- configure link2sd (i choose ext2 at start)
- reboot
And I started to backup my apps. All the apps linked to the ext partition except 8-10. I reboot the phone then I could link 2 mores apps. Then again. I do it again until apps doesn't link anymore. So I'm here with an sd-ext partition nearly full (600Mo with 70 app) and an Internal memory nearly full too 20Mo left.
It's very strange because I read everywhere that 512 partition is enough with 100+ apps and I have 600Mo with 70 apps. Can you help me ?
Thanks a lot for helping me to solve that problem
Keru
PS: Maybe I should test S2E script.
Can't solve my problem. Tried with a full wipe and a reflash of CM9, it doesn't work.
When apps is linked, Internal memory fills up too.
Problem solved with S2E and partitionning with Minitool Partition Wizard. Don't know what was wrong. Link2sd or CWM.
Kerumen said:
Can't solve my problem. Tried with a full wipe and a reflash of CM9, it doesn't work.
When apps is linked, Internal memory fills up too.
Click to expand...
Click to collapse
Thats the solution, maybe its a matter of taste maybe not but AMONRA recovery as more options like choose your ext tipe, i dont use link2sd along time ago i use S2E in CM7 and CM9 in CM10 davisnt mode they work flaweless.
So i dont now what probems link2sd gives plus with the mods above dont loose any widget...
To use s2e in cm9 with ext2 or ext3 this is the solution...
http://forum.xda-developers.com/showthread.php?p=29366650
If you have ext4 i will explain how i do with amonra recovery if app dont recognize, whatever ext we have in cm9 after install s2e we go to settings install app grant root then settimgs and mount ext as ext4 without jornaling check that box then reboot and app will recognize ext and allow to choose what we want in ext,howevee with ext4 in the first reboot i reboot to recovery and choose ext3 to ext4(i already have ext4 but i do this not to partition ext again but im clockwork maybe if partion sd agaim will work) and when i reboot app recognizes ext4 and allows me to have like i show in the link above....
About link2sd cant help.
Have to go hope it helps.
Sent from my LG-P500 using xda app-developers app
about partioning sd card
Kerumen said:
(sorry for my English, I'm french)
Hi guys !
Maybe you gonna think ("another partition thread") but I didn't find anything related to my issue so I'll explain it to you :
I decided to partition my sd card. Everything works fine :
- partition in CWM (1024 for ext, 64 for swap)
- copy back my sd card
- configure link2sd (i choose ext4 at start)
- reboot
Then, I wanted to link all apps to sd. It works for some apps (about an half) but the others didn't want to link. I got this error message :
[INSTALL_FAILED_INSUFFICIENT_STORAGE]
Some apps works, some apps doesn't. It was a veritable mess. So i decid to wipe data and start again from a clean install.
So I :
- partition again in CWM (1024 for ext, 0 for swap)
- copy back only Titanium Backup
- configure link2sd (i choose ext2 at start)
- reboot
And I started to backup my apps. All the apps linked to the ext partition except 8-10. I reboot the phone then I could link 2 mores apps. Then again. I do it again until apps doesn't link anymore. So I'm here with an sd-ext partition nearly full (600Mo with 70 app) and an Internal memory nearly full too 20Mo left.
It's very strange because I read everywhere that 512 partition is enough with 100+ apps and I have 600Mo with 70 apps. Can you help me ?
Thanks a lot for helping me to solve that problem
Keru
PS: Maybe I should test S2E script.
Click to expand...
Click to collapse
___________________________________________________________________________________________________________________
For CM9 S2e will work. You need to follow the partioning method and then follow the S2E script (S2E) procedure to increase your internal; memory... google it and you will find how to go about freeing internal space using S2E, If you are unable to find anything >>> Hit back ivl fin the link and post it..... Cheers
Kerumen said:
Problem solved with S2E and partitionning with Minitool Partition Wizard. Don't know what was wrong. Link2sd or CWM.
Click to expand...
Click to collapse
I have the same problem, I will try this steps and see if it works.
Thanks!

Categories

Resources