I'm currently using CNA 1.5.5 and Matr1x 18.0. When I go to BLN Control, it says "This liblights does not support BLN" but I know Matr1x 18.0 has BLN support and I used Matr1x with stock ICS before with BLN support.
Is this a bug with the new CNA 1.5.5?
Try removing BLN Control and install/setup NSTools. Setup BLN and then make sure the service is checked on in the rightmost tab. It supports missed calls like the BLN Pro app.
Related
I ran the bln test app, and the result is
BLN enabled: true
NotificationLed enabled:false
isBlnKernel:true
isBlnLiblights:true
Stock 2.3.4 with Netarchy 1.3.0.9 kernel, Bln control pro 0.98
but the bln app test and in real cases it doesn't work, anyone help?
SOS!!!!!!!!!!!!!!
Does anyone knows if there's a app that works with ics for the led notification led?
BLN control is not working on ics
EDIT:
I use the kwiboo rom and kernel
BLN works fine, but you have to use NSTOOLS to enable it
Greetz
frutelaken said:
BLN works fine, but you have to use NSTOOLS to enable it
Greetz
Click to expand...
Click to collapse
Oke thanks! I will give it a try
I have installed nstools and bln. But in nstools it says status not available and blink status not available. I have give me phone a reboot.
i think the kwiboo kernel does not support bln
Use Francos kernel.
Greetw
Use Matrix kernel
Sent from my Nexus S using XDA App
frutelaken said:
Use Francos kernel.
Greetw
Click to expand...
Click to collapse
`
Thanks! Use the francos kernel now
Hello!
As you can see in the title BLN isn't working!
I tried also another kernel (air kernel) and it's not working...
The rom is the best i tried so far with this one exception!
I tried using BLN control but the same as with NSTools, not working...
anyone a hint please?!
dmnk93 said:
Hello!
As you can see in the title BLN isn't working!
I tried also another kernel (air kernel) and it's not working...
The rom is the best i tried so far with this one exception!
I tried using BLN control but the same as with NSTools, not working...
anyone a hint please?!
Click to expand...
Click to collapse
In the NSTools app, have you enabled the service on the setting tab?
Change your kernel into one that supports BLN
Sent from my SGH-I9000 using XDA Premium App
dmnk93 said:
Hello!
As you can see in the title BLN isn't working!
I tried also another kernel (air kernel) and it's not working...
The rom is the best i tried so far with this one exception!
I tried using BLN control but the same as with NSTools, not working...
anyone a hint please?!
Click to expand...
Click to collapse
i have been using matr1x 18.5 and 19 with codename 4/12 RC 4/12,13,14 nightlies and BLN works with each one just fine. Try this: uninstall bln control, go into recovery and wipe dalvik cache (and cache if you want) then re-flash matr1x 19. then reboot system. tell us if that works.
chalan30 said:
i have been using matr1x 18.5 and 19 with codename 4/12 RC 4/12,13,14 nightlies and BLN works with each one just fine. Try this: uninstall bln control, go into recovery and wipe dalvik cache (and cache if you want) then re-flash matr1x 19. then reboot system. tell us if that works.
Click to expand...
Click to collapse
i tried it but it wasn't working
i may try a nightly to...
Hi,
I just flashed *Matr1x* v23.5BLN kernel for BLN support, but it does not work on my Nexus S i9023. I tried BLN control and NSTools for activation, but without any success.
Does anyone have experiences with BLN with the same configuration?
Thanks in advance
gilbert089 said:
Hi,
I just flashed *Matr1x* v23.5BLN kernel for BLN support, but it does not work on my Nexus S i9023. I tried BLN control and NSTools for activation, but without any success.
Does anyone have experiences with BLN with the same configuration?
Thanks in advance
Click to expand...
Click to collapse
That's my same issue.
BLN can be set with some difficulties on JB.
In my case, I'm using Marmite kernel. BLN works, but I cannot keep the lights on.
... indeed: in testing mode within BLN control, lights go on but not when
a call or sms come in I think the best thing is to move from
factory to CyanogenMod or another custom ROM
BLN problem
gilbert089 said:
... indeed: in testing mode within BLN control, lights go on but not when
a call or sms come in I think the best thing is to move from
factory to CyanogenMod or another custom ROM
Click to expand...
Click to collapse
Correct!
I'm using stock OTA 4.1.2 and matr1x 23.5 kernel, flashed using TWRP recovery, installed busybox, activated through NSTools.
BLN works excellent on SMS and missed calls. Blinking works fine too, OC 1.2ghz works fine also.
ej8989 said:
I'm using stock OTA 4.1.2 and matr1x 23.5 kernel, flashed using TWRP recovery, installed busybox, activated through NSTools.
BLN works excellent on SMS and missed calls. Blinking works fine too, OC 1.2ghz works fine also.
Click to expand...
Click to collapse
I did nearly the same: self-installed stock 4.1.2 via update from 4.1.1, CWM recovery, DooMLoRD_v4_ROOT-zergRush-busybox-su - will try CyanogenMod M2 today
The subject is on.
Any solution to get BLN with CM kernel?
Sensitivity said:
The subject is on.
Any solution to get BLN with CM kernel?
Click to expand...
Click to collapse
CM kernel already has BLN included IIRC. You can use Devil Tools, NSTools and many other software to control it.
polobunny said:
CM kernel already has BLN included IIRC. You can use Devil Tools, NSTools and many other software to control it.
Click to expand...
Click to collapse
BLN control said it's not..
Sensitivity said:
BLN control said it's not..
Click to expand...
Click to collapse
Because BLN control can control Neldar implementation only as far as I'm aware. BLN in CM is CM own implementation which differs a bit. Use another software, or through an init.d script.
polobunny said:
Because BLN control can control Neldar implementation only as far as I'm aware. BLN in CM is CM own implementation which differs a bit. Use another software, or through an init.d script.
Click to expand...
Click to collapse
and you know what app can i use to blinking notification with BLN?
Try nstools
Sent from my ns4g using Tapatalk 2