Hi Forum,
I have a really bad Network and in buildings I am constantly low on 3G reception. When i switch to 2G, it is way better. At work, at home and at my friends, I have WiFi, so I don't need 3G for a fast data connection. On the bus, however, I do use 3G and it's working fine.
So, what is the simplest way to automatically switch to "GSM Only" when I connect to a WiFi and switch back to "GSM auto (prl)" automatically when I disconnect from a wifi?
I tried EasyProfiles and UltimateJuice so far, both are too feature-rich, but I failed to configure them properly (and for EasyProfiles, the feature is still too bugged)
Thank you in advance
in Leedroids ICS rom there is a box to tick to activate this in settings-power
Related
It looks like my TC is using HSDPA network (about 100k/hour) even during the time I am connected via wifi. Is that a normal behaviour, or can I force it to automatically disconnect HSDPA while using wifi?
It depends on how you setup your routing.
If you have your wifi network set as your "work / business" network and hsdpa as your internet access. It'll ofcourse route all trafic over hsdpa.
Check your wifi connection and set the appropriate network type. This setting is done for every access point. It's not a global wifi setting afaik.
The wifi connection is setup as internet, so that is not the problem.
What I find is that both wifi and 3g are active. I can turn off 3g by turning off data connection in the comm manager, leaving me with the sole wifi connection (and internet access of course). However, as soon as the TC goes to sleep it will come back with both 3g and wifi. What I found also is that it is quicker to initialise the HSDPA connection than to wifi one.
Is there a way to force it to check it for wifi connection first, and then only connect to HSDPA if no wifi is available?
Sorry, that I don't know.
And I can't be bothered by it here in NL. As we've got flatrate utms/hsdpa here with a number of providers.
At home I only turn on Wifi if the umts/hsdpa connection is instable.
-Does anyone know how to priotize w-lan for internet connections?
It seem that my phone always uses the mobile connections (GSM, 3G etc).
In menu for connections where internet connections can be created, I can't find anyting about w-lan.
This is something I've been meaning to ask about while I wait for the Fuze. By way of background, I have a Cingular 8525 with the original (WM5) ROM, and it drives me nuts using it at home. I only get EDGE inside my house, but the stupid phone persists in making an EDGE data connection instead of using the nice, fast Wifi connection that I just enabled. I use NoData to make sure it doesn't connect via EDGE or 3G, and then half the time it says it says that it can't connect -- even though the icon says that it is connected!! The only way I can reliably connect via Wifi is to go briefly into and out of flight mode, then turn on Wifi before connecting.
I'm really, really hoping that the situation is better with the Touch Pro/Fuze. Can anyone reassure me on that?
it should be accessing wifi first by default i believe...unless other connection is already connected
Hello!
Start first the WiFi Connection and then the Internet Explorer or Opera.
pjo12345
There's this stupid thing with wlan connections in WM - if connection type is set to 'Work', you can browse through files on other computers in (W)LAN at home, but any Internet connection wll be realised through GRPS/3G. To make it connect to the Internet using WiFi, you need to switch wifi type back to 'Internet'.
Maybe that's the thing?
Is there a way how to setup that the WiFi is connected to both (work AND internet)? I never saw WiFi connected only to work network... I assume there is no way but why not to ask ;-)
I know that many others have problem with that, but I didn't find any solution yet...
Because when I set it as work, my Exchange sync is working but no Internet, and when I switch to Internet, opera and QuickpGPS is working, but no Exchange sync (it is trying to open VPN connection because I need to go though inside address to the server because certificates and of course it cannot get it). Or I need somehow set that no VPN will be dealed on this WiFi network...
I need something like BOTH or Auto option.
It seems to be switching from Wlan to G / 3G / H when the signal is not that great. Mostly with the weather tab and Opera. Quick GPS works fine. The way I make sure it is on the internet through wlan is to shutdown the telephone and keep the wlan on with comm manager. The disadvantage is that anyone calling will be heading to your voicemail. Another option is to use the "Nodata" program, en disable to internet connections.
On Touch Pro, I usually just go to COMM MANAGER and switch on wifi and switch off data connection. It is only a couple of quick steps and saves battery, since you don't need both on, if you only want to use wifi.
I am sure there must be a more seamless solution, but I like easy fixes.
wmm said:
I'm really, really hoping that the situation is better with the Touch Pro/Fuze. Can anyone reassure me on that?
Click to expand...
Click to collapse
No it is not better. Turning on WiFi is not enough. It will continue to use the cellular data connection until you manually turn it off. This wouldn't be so bad, but in my experience I've had to push the button to turn off the cellular connection multiple times before it would actually do so. What would be really nice is if WM could seamlessly switch from the cellular network to WiFi, with zero user interaction, just like the iPhone does.
I got an other problem with wifi. When I establish a wifi-connection and pull my mail the ppc still connect with a data-canection and didn't use the wifi. My kaiser used the wifi-connection for that.
8notime said:
No it is not better. Turning on WiFi is not enough. It will continue to use the cellular data connection until you manually turn it off. This wouldn't be so bad, but in my experience I've had to push the button to turn off the cellular connection multiple times before it would actually do so. What would be really nice is if WM could seamlessly switch from the cellular network to WiFi, with zero user interaction, just like the iPhone does.
Click to expand...
Click to collapse
I wrote the original post before I had a chance to try it for myself. I've had a Fuze for three weeks now, and it works fine for me. I turn on wifi and the Fuze uses wifi. I turn it off and it goes back to normal wireless. (I did do the registry edits to turn on the HSDPA stuff in the connections tab and enabled the modified connection icons in the menu bar. I don't know if that had any effect on this issue or not, but it does what I would expect now.)
Here's a basic question about the HTC Fuze. If I'm using the Edge network and I turn on wifi, thereby getting a faster connection, do Fuze applications default to the faster connection or do I somehow have to turn off the edge/3G connection specifically. I know I should be able to tell...
I usually have both wifi and edge/3g off. When I need data I turn on whatever i need. You do that thru the communication manager.
I think the real question is with both the Edge/3G on and Wifi connected, where will the data transfer? Through the cell network or the WiFi network?
the icons on the top bar of my device display clear which connection is active
with a data session
when one is active it's the only one being used to access data from the internet
It's possible to have both OTA and wifi active, which is what the OP is driving at. IME a program will find and use the faster connection at startup, but if the program is running on OTA and you connect wifi, a lot of programs won't switch to the faster connection. Again, that's just my anecdotal experience - it's hard to tell which connection is being used in real time.
hi,
is there a way that my phone automatically switches from 3G to 2G, when connected to a Wifi network?
I figured, the only reason why I need 3G, is because of the fast mobile internet connection......which I wont be using anyway, while I'm connected to a Wifi-Network
so it would make alot of sense to switch the cellular network from 3G to 2G, to save battery....
is there an app for that?
okay, well...tasker can easily do that
I think I got my solution
Hi,
my problem: I'm using my U11 in an aircraft for navigation. A anti collision device (FLARM/ADS) is connected via Wifi. That works fine.
BUT unfortunately I cannot connect to the web via 3G/4G at the same time.
I tried to set "Use always mobile data" in developer settings... no success.
As long as Wifi is on no chance to connect via mobile Data.
Is ther any chance to solve my problem? THX for your help!
All android is like this I think.
Connect to wifi = kill the SIM internet, cannot enable both on the same time.
It's not a new topic btw, like when we use a GoPro and using the hotspot to control it.
Fast network switching is as close as it comes but it still won't run wifi and cell at the same time. Wifi and cell must be possible because wifi calling uses WiFi and cell (when 4g is connected).
Can you not use wifi hot-spot in some way?.