Database Info

[Q] ¿Help getting back to stock rom?

Hello guys
First of all, I'm new in here, so I don't know much stuff.
I recently got my transformer and wanted to check out the Android Revolution HD rom. Before flashing it, I made a backup using CWM.
I tried the rom (before installing it, yes, I did the superwipe thing) but didn't like it because the gps issues. I wanted to go back to stock and did again a superwipe and then made a restore from the backup.
When I rebooted my tablet, the configuration screen came up and started freezing and rebooting. I tried re-flashing the backup but it kept going on with the crashing and rebooting stuff.
I've been searching far and wide on how to go back to stock and I have found just the nvflash but my serial starts with B70 so I know I can't use it.
I decided to reflash Android HD Revolution because it's the only way the tablet will work, but I would love to go back to stock so I can use the gps properly.
So, Is there any way I can go back to stock? If this means something, I live in South America, so I assume I need a WW thing or whatever that means
Thanks in advance for your help

There's a flashable rooted stock ROM here
http://forum.xda-developers.com/showthread.php?p=19093950

Thank you vyer much, I had seen that thread but since it said the following:
This will not work unless you have:
1. clockworkmod
2. STOCK firmware (root is fine)
3. the US or WW firmware
4. The appropriate prerequisite firmware (e.g. the latest firmware before this update)
Click to expand...
Click to collapse
I thought it wouldn't work.
Would you mind helping me understand the rules for flashing this version please? Right now I'm running Android Revolution HD 2.3.0
Thanks again!

Reboot into CWM recovery
Clear data and flash ROM. You can use Titanium backup to save apps and data if you don't want to lose anything.

baseballfanz said:
There's a flashable rooted stock ROM here
http://forum.xda-developers.com/showthread.php?p=19093950
Click to expand...
Click to collapse
In my understanding that is not a (complete) ROM but just an OTA update for a stock rom. Cannot be used to replace another ROM.

That's the same thing I understood from the ROM flashing rules.
I guess there's no stock rom that I can flash? It can't be (or can it?)

http://eeepadhacks.net/transformer-hacks/how-to-unrootunbrick-eeepad-transformer/
Steps 1 - 10 will get you a stock rooted ROM.

OK this is the link that has the full ROM. CWM flash-able.
http://forum.xda-developers.com/showthread.php?t=1409584

thank you all for the answers!!!
Baseballfanz, I've already tried that one, but it didn't work. Thanks though.
Neidlinger, thank you very much for pointing me in the right direction! If I ever find another GPS problem (since I haven't found one since I reflashed Android Revolution) I will use this tutorial.
Thanks again

[Q] Cant install new kernels

Hi guys, I'm using the CM9 ICS with my transformer and I was trying to install a different kernels without any success at all. I've booted into CWM (V5) and installed from sd card but when I restart the machine, It's always with the same kernel. Can someone suggest how to make it work?

How long does the install take? That should give some insight onto what it is doing

yosi199 said:
Hi guys, I'm using the CM9 ICS with my transformer and I was trying to install a different kernels without any success at all. I've booted into CWM (V5) and installed from sd card but when I restart the machine, It's always with the same kernel. Can someone suggest how to make it work?
Click to expand...
Click to collapse
Just to be sure, CWM v5 will not read external uSD card, only the internal storage /sdcard. May I know the kernel you are installing?

It takes about a minute to install.
I've tried a few:
TesteyMeh ICS 0.7
Blades
Others...
All of them seem to install fine but when rebooting I see the same kernel version and I cant OC.

have u tried wiping the cache and dalvik before flashing them?

scottyf79 said:
have u tried wiping the cache and dalvik before flashing them?
Click to expand...
Click to collapse
Yes I have... no good

yosi199 said:
It takes about a minute to install.
I've tried a few:
TesteyMeh ICS 0.7
Blades
Others...
All of them seem to install fine but when rebooting I see the same kernel version and I cant OC.
Click to expand...
Click to collapse
A minute is way too long. Kernels only take like 3 seconds cuz they are small.
Try mount /system under mounts and storage before flashing the kernel.

yosi199 said:
It takes about a minute to install.
I've tried a few:
TesteyMeh ICS 0.7
Blades
Others...
All of them seem to install fine but when rebooting I see the same kernel version and I cant OC.
Click to expand...
Click to collapse
Flashing a new kernel takes a few seconds. After reboot please pay attention to the blue indicator below the Android figure. It this not appears something went wrong with the first stage of the flashing process, invalid image/zip file etc.
Please use the customized CWM version, just not the flashed one from the Rom manager. I'v good experiences with the R2 (internal sdcard only) as well with the R1 (external micro-sdcard only). I preferred the R1 version.
Btw I'v have the best experiences with my TF101G with the CM9 build of March 29 combined with the quevor-test8 (just NOT from the guevor thread but ONLY from the thread of Richard because it's compiled for CM9) kernel, no reboots and no deep sleeps anymore while 3G and Wifi is working fine. Please do not wipe or clear something before flashing the new kernel to prevent Wifi problems. And I'v the best experiences not using the reboot system now from CWM but using power down and switch on the TF manually.

antond57:
i too have been having trouble getting kernels to allow overclocking...i flash one, all looks ok but when i get to tablettop the kernel info appears unchanged and setcpu wont clock past 1000.
could you maybe please post links to the rom and kernel you used? im having trouble locating the Richards R1 and R2 versions. i would like to see if i can repeat your success w/ these versions.
much appreciated.

I have same issue except worse yesterday. I'm on latest CM9. I tried to flash guevro test 9 and I did wipe both cache. Using roach 2 recovery. Just stayed on Asus screen. Blue bar did pop up and take a second or so but nothing. Checked md5 and all was good.
I had to totally flash ROM again after a full wipe because even a restore from recovery wouldn't go past very first Asus screen. I'm not sure what happened but I'm definitely now worried about trying a new kernel again
Sent from my Transformer TF101 using xda premium

eminembdg said:
I have same issue except worse yesterday. I'm on latest CM9. I tried to flash guevro test 9 and I did wipe both cache. Using roach 2 recovery. Just stayed on Asus screen. Blue bar did pop up and take a second or so but nothing. Checked md5 and all was good.
I had to totally flash ROM again after a full wipe because even a restore from recovery wouldn't go past very first Asus screen. I'm not sure what happened but I'm definitely now worried about trying a new kernel again
Sent from my Transformer TF101 using xda premium
Click to expand...
Click to collapse
Yap, I have the same problem. Nandroid restore did not restore to the previous state. For me, re-flash the ROM fixed the problem (no full-wipe).

Try Using clockwork recovery
I have just flashed guevor kernel as well with no problems. I'm using clockwork mod recovery. Have you tried it?

CyanogenMOD 10 back up question.

Hi,
I have followed everything in this thread http://forum.xda-developers.com/showthread.php?t=1837863
I have backups nandroid ready and wasn't too sure, if I dont like this build then i could restore back to stock using CWM? or Odin.
I felt that I need to wait for reply to comfirm before flashing this cyanogenMOD 10.
Thanks!

LeonKnight12 said:
Hi,
I have followed everything in this thread http://forum.xda-developers.com/showthread.php?t=1837863
I have backups nandroid ready and wasn't too sure, if I dont like this build then i could restore back to stock using CWM? or Odin.
I felt that I need to wait for reply to comfirm before flashing this cyanogenMOD 10.
Thanks!
Click to expand...
Click to collapse
IF my memory serves me right, with an unlocked bootloader, you can recover to a TW rom but I think its needs to either have the kernel built into it OR you need to somehow flash to a TW kernel. I say this because I think that if your kernel is still an AOSP one, then the device will not boot up.
some roms already come with a kernel for their rom so I think in most cases, with CWM 6.0.1.x, you could restore a TW nandroid.

If you want to restore a backup of a TouchWiz rom you have then just use the EZ Recovery app to flash the hybrid (CWM/Kexec) recovery...reboot to recovery and restore your nandroid. Simple process!
Once the Dev's building TW roms start using the non-kexec flashing method then you will be able to restore using the normal CWM recovery. Just like you said, you can also use ODIN to restore to stock but it's a pain because you have to root all over again. Just know you have a few options.

Ok thanks everyone!

So good

Fwiw... I've been switching back and forth between Synergy and CM for a couple days now (flashing multiple times) and cwm touch works for synergy but u need new cwm for CM10.
Hope this helps.

[Q] Restoring through CWM to stock

hi,i am using stock rom running 4.0.4,i had it rooted too and now i had two queries
1)Is rom manager compatible with Atrix 2??
im asking this because when i open it, it shows u need to install CWM recovery...but no option in that responds...not even intall cwm (1st option in menu)....so i installed CWM using atrix boot strapper app and now still rom manager is not detecting CWM..please help
2)after installing CWM, i had backup my present stock rom..so if i flash a new rom now will that CWM and back up still exist??(because we will wipe data which will remove everyhting right??)
for suppose if i flash jelly bean rom and if i dont like it...can i restore my previous stock rom without bricking my device??
thanks for u r help

vdpraneeth said:
hi,i am using stock rom running 4.0.4,i had it rooted too and now i had two queries
1)Is rom manager compatible with Atrix 2??
im asking this because when i open it, it shows u need to install CWM recovery...but no option in that responds...not even intall cwm (1st option in menu)....so i installed CWM using atrix boot strapper app and now still rom manager is not detecting CWM..please help
2)after installing CWM, i had backup my present stock rom..so if i flash a new rom now will that CWM and back up still exist??(because we will wipe data which will remove everyhting right??)
for suppose if i flash jelly bean rom and if i dont like it...can i restore my previous stock rom without bricking my device??
thanks for u r help
Click to expand...
Click to collapse
1) Rom manager is not compatible with Atrix 2. I would not use it. Why do you need it anyway??
You can use Atrix Bootstrapper to go into CWM recovery . Rest can be done there. Or you can use Boot Menu Manager.
2)Of course! it will still be there! the backup is saved on your SD Card. So as long as you don't format your SD Card. It will be there.

NHS2008 said:
1) Rom manager is not compatible with Atrix 2. I would not use it. Why do you need it anyway??
You can use Atrix Bootstrapper to go into CWM recovery . Rest can be done there. Or you can use Boot Menu Manager.
2)Of course! it will still be there! the backup is saved on your SD Card. So as long as you don't format your SD Card. It will be there.
Click to expand...
Click to collapse
Rom Manager does work with Atrix2. If you're on Stock ICS, you can install CWM on every boot, then flash the Bionic recovery through Rom Manager. That will allow you to use the 1 touch backup in RM, just hit backup rom and everything does what it's supposed to.
Here is the CWM on every boot for Stock ICS.

NHS2008 said:
1) Rom manager is not compatible with Atrix 2. I would not use it. Why do you need it anyway??
You can use Atrix Bootstrapper to go into CWM recovery . Rest can be done there. Or you can use Boot Menu Manager.
2)Of course! it will still be there! the backup is saved on your SD Card. So as long as you don't format your SD Card. It will be there.
Click to expand...
Click to collapse
2)will the CWM recovery exist after flashing new rom or i need to install it again??
when i restore to stock fom JB, it means downgrading the firmware right??
so will there be a chance of bricking or is it same to restore anytime from any version??

vdpraneeth said:
2)will the CWM recovery exist after flashing new rom or i need to install it again??
when i restore to stock fom JB, it means downgrading the firmware right??
so will there be a chance of bricking or is it same to restore anytime from any version??
Click to expand...
Click to collapse
No, your Recovery will be wiped after you flash a new rom, but you can install it again and restore your ROM.
But when restoring a rom, make sure you ARE ON THE ROM you are restoring.
E.g. If you flash JB and want Stock ICS back with your backup. First flash the Stock ICS from RSD and then restore your backup from CWM on it.
Or Vice-Versa.
@41rw4lk, Thanks for rectifying that. I did not bother with Rom Manager much.

NHS2008 said:
No, your Recovery will be wiped after you flash a new rom, but you can install it again and restore your ROM.
But when restoring a rom, make sure you ARE ON THE ROM you are restoring.
E.g. If you flash JB and want Stock ICS back with your backup. First flash the Stock ICS from RSD and then restore your backup from CWM on it.
Or Vice-Versa.
@41rw4lk, Thanks for rectifying that. I did not bother with Rom Manager much.
Click to expand...
Click to collapse
but downgrading to stock ICS from JB will brick my mobile right??
is there any problem if im not on the rom im restoring??
(im a newbie and i dont know much..even not found these after searching a lot..thats the reason im asking all these)

41rw4lk said:
Rom Manager does work with Atrix2. If you're on Stock ICS, you can install CWM on every boot, then flash the Bionic recovery through Rom Manager. That will allow you to use the 1 touch backup in RM, just hit backup rom and everything does what it's supposed to.
Here is the CWM on every boot for Stock ICS.
Click to expand...
Click to collapse
how is it possible to flash bionic recovery through RM...all the menu options are disabled for me there even after CWM installed through bootstrap

vdpraneeth said:
2)will the CWM recovery exist after flashing new rom or i need to install it again??
when i restore to stock fom JB, it means downgrading the firmware right??
so will there be a chance of bricking or is it same to restore anytime from any version??
Click to expand...
Click to collapse
I don't think any recovery exist after flashing a new rom. We have a locked bootloader, so we can't replace the stock recovery.img, all of our recoveries hijack the boot process to work. CM10 and PA I believe have a built in recovery, and that's about as close as you'll get to having a recovery exist after flashing a rom.
As far as restoring from JB, I believe you can downgrade to ICS, but you'll have to look at the JB thread to be certain. I'm on AT&T so I haven't had an opportunity to try JB (officially). CM10 is based on JB, but for our phone with the locked bootloader, it's more of a pseudo experience and is based on our ICS framework.
As for bricking, there is always a chance to brick, that's part of the mod game, but if you read and pay attention to what you have and what you're doing, you'll be alright.

vdpraneeth said:
but downgrading to stock ICS from JB will brick my mobile right??
is there any problem if im not on the rom im restoring??
(im a newbie and i dont know much..even not found these after searching a lot..thats the reason im asking all these)
Click to expand...
Click to collapse
UNLESS you have AT&T phone you should be just fine with ref lashing the ICS.
YES. there is a big problem if you are not on a ROM you are restoring.
Its like you are trying to comlete your jigsaw puzzle by putting pieces from some another jigsaw puzzle.

vdpraneeth said:
how is it possible to flash bionic recovery through RM...all the menu options are disabled for me there even after CWM installed through bootstrap
Click to expand...
Click to collapse
You need to use the CWM on every boot setup, the Atrix2Bootstrap alone won't do.

41rw4lk said:
You need to use the CWM on every boot setup, the Atrix2Bootstrap alone won't do.
Click to expand...
Click to collapse
yes...my phone is an AT&T version...though im using it with IDEA.....
so if i install CWM on every boot,then rom manager will detect it and work right??

vdpraneeth said:
yes...my phone is an AT&T version...though im using it with IDEA.....
so if i install CWM on every boot,then rom manager will detect it and work right??
Click to expand...
Click to collapse
Yes. I will say though, if you're on an AT&T branded phone with AT&T firmware, do NOT try to flash the new JB FXZ. It doesn't matter who your carrier is, it matters what firmware your phone is using. So, if you're on AT&T then you need to make sure that the things you flash are for AT&T, or else you will brick and that will be then end of that.

41rw4lk said:
Yes. I will say though, if you're on an AT&T branded phone with AT&T firmware, do NOT try to flash the new JB FXZ. It doesn't matter who your carrier is, it matters what firmware your phone is using. So, if you're on AT&T then you need to make sure that the things you flash are for AT&T, or else you will brick and that will be then end of that.
Click to expand...
Click to collapse
thanks a lot...
what are the ROMS avaialble for us???
can i reflash stock ICS from any of those ROMS safely??
thank you

vdpraneeth said:
thanks a lot...
what are the ROMS avaialble for us???
can i reflash stock ICS from any of those ROMS safely??
thank you
Click to expand...
Click to collapse
CM10
PA
Numa
MIUI (had battery issues, but I think they got it all worked out)
there's a few, you'll just have to look. Most of the time, if something is not meant for AT&T, the devs will post in the description that it isn't compatible. If you want stock ICS back at anytime, you can do yourself a favor and make a backup of your stock ICS all setup the way you like it, so you can restore if needed. If all else fails, there is an Official ICS FXZ that will get you back to stock ICS.

41rw4lk said:
CM10
PA
Numa
MIUI (had battery issues, but I think they got it all worked out)
there's a few, you'll just have to look. Most of the time, if something is not meant for AT&T, the devs will post in the description that it isn't compatible. If you want stock ICS back at anytime, you can do yourself a favor and make a backup of your stock ICS all setup the way you like it, so you can restore if needed. If all else fails, there is an Official ICS FXZ that will get you back to stock ICS.
Click to expand...
Click to collapse
my main question is :
will downgrade to ICS cause brick??
how do i create my own backup for stock ICS??

vdpraneeth said:
my main question is :
will downgrade to ICS cause brick??
how do i create my own backup for stock ICS??
Click to expand...
Click to collapse
You're killing me smalls. You're on ICS already, you're not downgrading anything, nor can you downgrade ie. Gingerbread. There is no Official JB for AT&T, so that's not an issue. CM10 is a JB based rom built on an ICS frame, (for our phone at least), and again, you're not downgrading.
To make a back up, boot in to CWM or whatever recovery you're using (not stock), and click backup. You might hit up the noob thread to get an idea of the terminology and basics for our device. Not trying to be rude, but you're running yourself in circles. You got to walk before you can run.

Clockworkmod not working anymore.

Well I have been a CWM(and sometimes also TWRP) user for years. But I am stumped. I recently started having issues staying connected to AIO/Cricket(voice not even staying connected). As I am running a custom ROM I decided to try Stock and see if the problem persists, thus it may be a hardware issue with the radio or something. So I did a current backup, and restored one from a few weeks back. It's the same ROM but I thought it was worth a shot. It restored fine but the problem persisted. Then I decided to restore my new backup from the hour before. It failed. Gave me an MD5 Mismatch error(I think I have that right). So I made another new backup, same thing. I am unable to restore any backups made right now. I can still restore the one from a few weeks ago. I am running the very latest CWM touch. I tried flashing TWRP to see if that might help(using Rom Manager to do so). This has always worked before. It said that it works, and even tells me it's rebooting into TWRP when I reboot to Recovery. But the broken version of CWM is still what is loading. I am at a loss here.

your issue here is that you are using rom manager. rom manager doesnt fully work, it is broken, stop using it. you can flash a new recovery the right way, via fastboot. you can also flash twrp using the flashify app(yes, it works).

simms22 said:
your issue here is that you are using rom manager. rom manager doesnt fully work, it is broken, stop using it. you can flash a new recovery the right way, via fastboot. you can also flash twrp using the flashify app(yes, it works).
Click to expand...
Click to collapse
Thank you! Gonna try flashing TWRP that way now!

Landara said:
Thank you! Gonna try flashing TWRP that way now!
Click to expand...
Click to collapse
btw, i highly doubt that twrp will be able to restore a cwm backup. but if you have space on your device, it should at least create a backup.

simms22 said:
btw, i highly doubt that twrp will be able to restore a cwm backup. but if you have space on your device, it should at least create a backup.
Click to expand...
Click to collapse
First thing I did. I was able to backup with TWRP. Since I am currently running the restore from that NANDROID from a few weeks ago, it's all good! I am restoring the TWRP i just made, just to be sure. Seems to be restoring fine though. With my NANDRIOD problem solved, I can work on getting this radio issue fixed. I am really hoping it's just ROM related and I can salve it by flashing something else. I'm going to flash STOCK and see if it persists now.

simms22 said:
btw, i highly doubt that twrp will be able to restore a cwm backup. but if you have space on your device, it should at least create a backup.
Click to expand...
Click to collapse
Actually one fast question, if I may. Would it be at all risky to flash the stock radio onto a custom ROM? That seems the easiest fix, if it is a fix at all. I downloaded the correct stock radio for my 820 from here:
http://forum.xda-developers.com/goo...-android-4-4-2-kot49h-rooted-busybox-t2557523
If I just flash it over Nikxus would there be a problem?

Landara said:
Actually one fast question, if I may. Would it be at all risky to flash the stock radio onto a custom ROM? That seems the easiest fix, if it is a fix at all. I downloaded the correct stock radio for my 820 from here:
http://forum.xda-developers.com/goo...-android-4-4-2-kot49h-rooted-busybox-t2557523
If I just flash it over Nikxus would there be a problem?
Click to expand...
Click to collapse
no problem, in stock or custom roms the radios are the same

simms22 said:
no problem, in stock or custom roms the radios are the same
Click to expand...
Click to collapse
Thanks!